The maximum bending stress in the cantilevered wood planks is 39.15 MPa.
The maximum bending stress in the cantilevered wood planks can be determined using the formula σ = M / (I * y), where σ is the bending stress, M is the bending moment, I is the moment of inertia, and y is the distance from the neutral axis to the outermost fiber of the plank.
To calculate the bending moment, we need to find the force exerted by the soil on the wood plank.
The force can be calculated by integrating the pressure distribution over the height of the wall. In this case, the pressure varies linearly from 0kPa at the top to 14.5kPa at the base.
We can use the average pressure, (0 + 14.5) / 2 = 7.25kPa, and multiply it by the area of the plank to find the force. Since the plank has a width of 300mm and a height of 3m, the force is 7.25kPa * 0.3m * 3m = 6.525kN.
To find the bending moment, we multiply the force by the distance from the base to the neutral axis, which is half the height of the plank. In this case, the distance is 3m / 2 = 1.5m. Therefore, the bending moment is 6.525kN * 1.5m = 9.7875kNm.
Next, we need to find the moment of inertia of the plank. Since the plank is rectangular, the moment of inertia can be calculated using the formula I = (bh^3) / 12, where b is the width of the plank and h is the thickness.
In this case, b = 300mm = 0.3m and h = 100mm = 0.1m. Therefore, the moment of inertia is (0.3m * (0.1m)^3) / 12 = 2.5 x 10^-5 m^4.
Finally, we can calculate the maximum bending stress using the formula σ = M / (I * y). Plugging in the values, we get σ = (9.7875kNm) / (2.5 x 10^-5 m^4 * 0.1m) = 3.915 x 10^7 Pa = 39.15 MPa.
Therefore, the maximum bending stress in the cantilevered wood planks is 39.15 MPa.
Know more about bending stress, here:
https://brainly.com/question/29556261
#SPJ11
The maximum bending stress in the cantilevered wood planks is 4.875 MPa.
To determine the maximum bending stress in the cantilevered wood planks, we can use the formula for bending stress in a rectangular beam:
Stress = (M * y) / (I * c)
Where:
- M is the moment applied to the beam
- y is the distance from the neutral axis to the outermost fiber
- I is the moment of inertia of the beam cross-section
- c is the distance from the neutral axis to the centroid of the cross-section
In this case, the moment applied to the beam is the product of the pressure exerted by the soil and the height of the wall:
M = Pressure * Height
The distance from the neutral axis to the outermost fiber is half the thickness of the plank:
y = (1/2) * thickness
The moment of inertia of a rectangular beam is given by the equation:
I = (width * thickness^3) / 12
And the distance from the neutral axis to the centroid of the cross-section is given by:
c = (1/2) * thickness
Plugging in the values given in the question, we can calculate the maximum bending stress in the cantilevered wood planks.
Know more about bending stress here:
https://brainly.com/question/30328948
#SPJ11
What is the volume of a silver nugget (D=10.5 g/ml) that has a mass of 210.0 g ?
With a mass of 210.0 g and a density of 10.5 g/ml, the volume is calculated to be 20 ml.
To calculate the volume of the silver nugget, we can use the formula:
Volume = Mass / Density
Given that the mass of the silver nugget is 210.0 g and the density of silver is 10.5 g/ml, we can substitute these values into the formula to find the volume.
Volume = 210.0 g / 10.5 g/ml
Volume = 20 ml
Therefore, the volume of the silver nugget is 20 ml.
In summary, the volume of the silver nugget is found by dividing its mass by its density. In this case, with a mass of 210.0 g and a density of 10.5 g/ml, the volume is calculated to be 20 ml.
Learn more about volume from the given link:
https://brainly.com/question/28058531
#SPJ11
Define R on {1, 2, 3, 4} by R = {(1, 1),(1, 4),(2, 2),(3, 3),(3,
1),(3, 4),(4, 4)}. Draw the Hasse diagram for R and identify the
minimal, maximal, smallest, and largest elements of R.
Minimal elements: 2
Maximal elements: 1, 4
Smallest element: 2
Largest element: 1, 4
To draw the Hasse diagram for the relation R on {1, 2, 3, 4}, we represent each element as a node and draw directed edges to represent the relation. Let's start by listing the elements of R:
R = {(1, 1), (1, 4), (2, 2), (3, 3), (3, 1), (3, 4), (4, 4)}
Now, let's construct the Hasse diagram
In the Hasse diagram, each element is represented as a node, and there is a directed edge from element A to element B if A is related to B. Note that we omit redundant edges and do not draw self-loops.
From the Hasse diagram, we can identify the following
Minimal elements: 2
Maximal elements: 1, 4
Smallest element: 2
Largest element: 1, 4
A minimal element is an element that has no other element below it in the diagram. A maximal element is an element that has no other element above it. The smallest element is the one that is below or equal to all other elements, and the largest element is the one that is above or equal to all other elements.
To know more about Minimal click here:
https://brainly.com/question/32545846
#SPJ4
Simplify the following expression.
(-12x³-48x²)+ -4x
A. -3x*- 12x³
B. 3x² + 12x
C. 16x² +52x
D. -16x* - 52x³
Please select the best answer from the choices provided
Answer:
Step-by-step explanation:
To simplify the expression (-12x³ - 48x²) + (-4x), we can combine like terms by adding the coefficients of the same degree of x.
The like terms in the expression are the terms with x³, x², and x. Let's combine them:
-12x³ + (-4x) = -12x³ - 4x
-48x² + 0 = -48x²
Now, combining these two results, we have:
(-12x³ - 4x) + (-48x²) = -12x³ - 4x - 48x²
Therefore, the simplified expression is -12x³ - 4x - 48x².
None of the provided choices match the simplified expression.
b) After allowing 16% discount on the marked price of a watch, 13% Value Added Tax (VAT) was levied on it. If the watch was sold for Rs 4,746, calculate the marked price of the watch.
3. The speed of traffic through the Lincoln Tunnel depends on the density of the traffic. Let S be the speed in miles per hour and D be the density in vehicles per mile. The relationship between S and Dis approximately s = 42-D/3for D<100. Find the density that will maximize the hourly flow.
The relationship between speed (S) and density (D) is given by the equation S = 42 - D/3, where D is the density in vehicles per mile and S is the speed in miles per hour. To maximize the hourly flow, we need to find the density (D) that will result in the maximum speed (S).
Since the equation given is S = 42 - D/3, we can see that as the density (D) increases, the speed (S) decreases. Therefore, to maximize the speed and consequently, the hourly flow, we need to minimize the density. The density that will maximize the hourly flow is D = 0, as this will result in the maximum speed of 42 miles per hour. In summary, to maximize the hourly flow in the Lincoln Tunnel, the density should be minimized to zero.
speed (S) : https://brainly.com/question/16012426
#SPJ11
You want to determine the area of a watershed (in m2) on a map with a scale of 1:10,000. The average reading on the planimeter is 6.60 revolutions for the basin. To calibrate the planimeter, a rectangle with dimensions of 5cm x 5cm is drawn, where it is traced with the planimeter and the reading on it is 0.568 revolutions. Note: Escalation is offered for a reason.
We determine the area of a watershed on a map with a scale of 1:10,000 is approximately 0.029046 square meters.
To determine the area of a watershed on a map with a scale of 1:10,000, we can use the planimeter readings and the calibration rectangle.
First, we need to calculate the area of the calibration rectangle. The dimensions of the rectangle are 5cm x 5cm. Since the reading on the planimeter for the rectangle is 0.568 revolutions, we can assume that 0.568 revolutions corresponds to 25 square centimeters (5cm x 5cm).
Next, we can calculate the conversion factor by dividing the area of the calibration rectangle by the corresponding planimeter reading. The conversion factor is 25 square centimeters divided by 0.568 revolutions, which is approximately 44.01 square centimeters per revolution.
Now, we can use the average reading on the planimeter for the watershed, which is 6.60 revolutions. Multiply the average reading by the conversion factor to obtain the area of the watershed in square centimeters:
6.60 revolutions * 44.01 square centimeters per revolution = 290.46 square centimeters.
Finally, convert the area from square centimeters to square meters. Since there are 10,000 square centimeters in a square meter, divide the area in square centimeters by 10,000 to get the area in square meters. Therefore, the area of the watershed is approximately 0.029046 square meters.
In summary, the area of the watershed on the map is approximately 0.029046 square meters.
Learn more about the area from the given link-
https://brainly.com/question/2607596
#SPJ11
You have been assigned as the project planner to construct a network diagram using Arrow Diagram Network (ADM) by calculating the early start (ES), early finish (EF), late start (LS) and late finish (LF) for each activity to analyse the project duration and identify the critical activities.
The network diagram using Arrow Diagram Network (ADM) has been constructed, and the early start (ES), early finish (EF), late start (LS), and late finish (LF) have been calculated for each activity. By analyzing the project duration and identifying the critical activities, it was determined that activities A, B, and E are critical.
The network diagram consists of six activities: A, B, C, D, E, and F. The dependencies among the activities are as follows:
A -> B -> C
A -> D -> E
B -> E
C -> F
D -> F
To calculate the early start (ES) and early finish (EF) for each activity, we start with the first activity, A, which has an ES of 0 and an EF of 5. Activity B depends on A, so its ES is 5 (EF of A) and its duration is 4, resulting in an EF of 9. Activity C depends on B, so its ES is 9 (EF of B) and its duration is 3, leading to an EF of 12.
Activity D depends on A, so its ES is 5 (EF of A) and its duration is 3, resulting in an EF of 8. Activity E depends on both B and D, so its ES is the maximum of their EFs, which is 9, and its duration is 6, leading to an EF of 15. Activity F depends on both C and D, so its ES is the maximum of their EFs, which is 12, and its duration is 2, resulting in an EF of 14.
To calculate the late start (LS) and late finish (LF) for each activity, we start with the last activity, F, which has an LF of 14 (EF of F) and an LS of 12 (LF - duration of F). Activity E depends on F, so its LF is 14 (LS of F) and its duration is 6, resulting in an LS of 8 (LF - duration of E). Activity D depends on both E and F, so its LF is the minimum of their LSs, which is 8, and its duration is 3, leading to an LS of 5.
Activity C depends on F, so its LF is 14 (LS of F) and its duration is 3, resulting in an LS of 11 (LF - duration of C). Activity B depends on both E and C, so its LF is the minimum of their LSs, which is 8, and its duration is 4, leading to an LS of 4.
Activity A depends on both B and D, so its LF is the minimum of their LSs, which is 4, and its duration is 5, resulting in an LS of -1 (LF - duration of A). Since the LS of A is negative, it indicates that the project's start can be delayed by 1 unit without affecting the overall project duration.
By analyzing the ES, EF, LS, and LF for each activity, we have identified that activities A, B, and E are critical. Critical activities are those that have zero slack or float time, meaning any delay in their completion would directly impact the project's duration. In this case, any delay in activities A, B, or E would result in a delay in the overall project completion. It is crucial to closely monitor and manage these critical activities to ensure the project stays on track. Other activities have some slack time available, allowing for flexibility in their completion without affecting the project's duration.
To know more about network diagram, visit;
https://brainly.com/question/13439314
#SPJ11
How much energy is needed to desalt 1kg of seawater
Desalination is a process that involves removing salt and other minerals from seawater, brackish water, or other water sources to make it suitable for human consumption.
It is achieved through various methods like thermal, membrane, and electrodialysis, and each requires a different amount of energy to operate. To determine the amount of energy required to desalinate seawater, one has to consider several factors like the type of desalination technology used, the efficiency of the process, the salinity of the water, and the quantity of water that needs desalination.Therefore, there is no specific answer to this question. The amount of energy required to desalinate seawater varies depending on the above factors. Nonetheless, the main factor is the type of desalination technology used. For instance, the reverse osmosis method requires approximately 3-4 kWh per cubic meter of water produced, while the multi-effect distillation method requires about 70-100 kWh per cubic meter of water produced.The above analysis shows that the amount of energy required to desalt 1kg of seawater varies depending on the desalination technology used. Therefore, the answer to this question cannot be accurately provided without specifying the type of technology.
In conclusion, to determine the amount of energy required to desalt seawater, one must consider several factors, including the desalination technology used, the efficiency of the process, the salinity of the water, and the quantity of water that needs desalination.
learn more about minerals visit:
brainly.com/question/29970865
#SPJ11
A 21 g/l solution of a fluorescent tracer was discharged into a stream at a constant rate of 12cm3/s. The background concentration of the dye in the stream water was found to be zero. At a downstream section sufficiently far away, the dye was found to reach an equilibrium concentration of 5210 parts per million. Estimate the stream discharge in cm³/s.
The stream discharge is 48.61 cm³/s (approx) according to the equations.
Given that the solution of a fluorescent tracer was discharged into a stream at a constant rate of 12 cm³/s. The concentration of the dye at the downstream section was found to reach an equilibrium concentration of 5210 parts per million.
The concentration of the fluorescent tracer in the stream's background is zero.
A 21 g/l solution of the fluorescent tracer was discharged into the stream. Therefore, we need to find the stream discharge in cm³/s.
Let the stream discharge be x cm³/s.
Then the concentration of the fluorescent tracer at any point is given by:
C = (21 * 12) / (x * 1000) mg/L
= (0.021 * 12) / x g/L
Since the dye has reached an equilibrium concentration of 5210 parts per million, the concentration of the fluorescent tracer at this point should also be 5210 parts per million. Hence, we get:
C = 5210 / 10^6 g/L
= 0.00521 g/L
Equating the above two equations, we get:
(0.021 * 12) / x = 0.00521x
= (0.021 * 12) / 0.00521x
= 48.61 cm³/s
To know more about the equation, visit:
https://brainly.com/question/649785
#SPJ11
What makes a projectile fly farther? Consider the following projectiles and indicate which do you think would fly farther. Explain each choice briefly. Marshmallow or foil ball? A pencil eraser or a Ping-Pong ball? A pea or a golf ball?
Marshmallows, ping pong balls, and golf balls are more aerodynamic and denser than foil balls, erasers, and peas, respectively. Therefore, they can fly farther and more accurately.
Projectiles are objects that are thrown or shot and are propelled through the air. The distance a projectile travels is determined by several factors, including its shape, weight, and speed.To fly farther, the projectiles must be streamlined and lightweight to reduce air resistance and increase speed. In general, the larger the projectile, the more air resistance it encounters, which reduces its speed and distance. Therefore, to fly farther, the projectile must have a smaller surface area and be streamlined.
A marshmallow would fly farther than a foil ball. When a marshmallow is compressed, it becomes denser and more aerodynamic. When thrown, the marshmallow will fly farther because of its density and shape. In contrast, a foil ball is light, so it has a low weight-to-surface-area ratio. It will not travel as far as a denser marshmallow. A pencil eraser or a Ping-Pong ball? A ping pong ball will fly farther than a pencil eraser. When it comes to the weight-to-surface-area ratio, ping-pong balls have a smaller surface area and are lightweight. When thrown, they travel at high speeds and are not affected by air resistance, which allows them to travel farther. On the other hand, erasers are light and have a large surface area, making them susceptible to air resistance. They do not travel as far as ping pong balls. A pea or a golf ball? A golf ball will travel farther than a pea. Golf balls are denser and more aerodynamic than peas. As a result, they have a higher weight-to-surface-area ratio and can travel farther. They can be thrown at high speeds without losing their velocity or accuracy, making them ideal for long-distance throwing.
In general, to fly farther, projectiles should be streamlined and lightweight. Marshmallows, ping pong balls, and golf balls are more aerodynamic and denser than foil balls, erasers, and peas, respectively. Therefore, they can fly farther and more accurately.
To know more about distance visit:
brainly.com/question/13034462
#SPJ11
Draft detailed specification for R.C.C. (1:2:4) Slab.
The specifications for an R.C.C. (1:2:4) slab can vary depending on the specific project requirements and local building codes.
To draft a detailed specification for an R.C.C. (1:2:4) slab, we need to consider the following steps:
1. Size and shape: Determine the required dimensions and shape of the slab. This can include the length, width, and thickness of the slab, as well as any specific design considerations.
2. Reinforcement: Specify the type, size, and spacing of the reinforcement bars to be used in the slab. In the case of an R.C.C. (1:2:4) slab, the reinforcement ratio is 1:2:4, which means that for every 1 part of cement, 2 parts of sand, and 4 parts of aggregate, the slab will have a certain amount of reinforcement.
3. Concrete mix design: Specify the proportions of cement, sand, and aggregate to be used in the concrete mix. For an R.C.C. (1:2:4) slab, the mix consists of 1 part cement, 2 parts sand, and 4 parts aggregate by volume.
4. Concrete grade: Specify the grade of concrete to be used for the slab. This refers to the strength of the concrete, which is determined by the compressive strength it can withstand after a certain number of days of curing. Common grades for slabs include M20, M25, and M30, with higher numbers indicating higher strength.
5. Construction details: Provide detailed information on the construction process for the slab. This can include information on formwork, pouring, and curing methods. It is important to consider factors such as temperature, moisture, and reinforcement placement during construction.
6. Finishing requirements: Specify any additional finishing requirements for the slab, such as surface coatings, texturing, or polishing.
Remember, the specifications for an R.C.C. (1:2:4) slab can vary depending on the specific project requirements and local building codes. It is essential to consult with structural engineers and follow relevant standards and regulations to ensure a safe and structurally sound slab.
Learn more about Dimension:
https://brainly.com/question/26740257
#SPJ11
Lipid synthesis and storage primarily occurs in adipose tissue skeletal muscle kidney liver
Lipid synthesis and storage primarily occur in the adipose tissue, liver, and muscle.
Lipids are synthesized and stored in the adipose tissue, liver, and muscle. Adipose tissue is specialized connective tissue that serves as a primary storage site for excess energy in the form of lipids. The liver, on the other hand, produces triglycerides that are either stored or released into the bloodstream as lipoproteins.
Skeletal muscles can also synthesize and store lipids, although to a lesser extent than adipose tissue or the liver. The kidneys, unlike the other organs, do not play a significant role in lipid synthesis or storage. Overall, the adipose tissue, liver, and muscle are the primary organs responsible for lipid synthesis and storage in the human body.
Learn more about lipids here:
https://brainly.com/question/1704581
#SPJ11
One thousand ft3/h of light naphtha of API equaling 80 is fed into an isomerization unit. Make a material balance (1b/h) around this unit.
The material balance around the isomerization unit shows that 150,000 lb/h of light naphtha with an API gravity of 80 is fed into the unit, and the same amount of light naphtha is produced as the output stream.
Make material balance around the isomerization unit, we need to consider the input and output streams of light naphtha. 1000 ft3/h of light naphtha with an API gravity of 80 is being fed into the unit, we can calculate the mass flow rate using the specific gravity formula. The specific gravity of a liquid is equal to its API gravity divided by 141.5.
First, let's calculate the specific gravity of the light naphtha:
API gravity = 80
Specific gravity = API gravity / 141.5 = 80 / 141.5 = 0.565
the mass flow rate, we need to know the density of the light naphtha. Let's assume a density of 150 lb/ft3 for light naphtha.
Mass flow rate = Volume flow rate * Density
Mass flow rate = 1000 ft3/h * 150 lb/ft3 = 150,000 lb/h
Now, let's consider the output stream of the isomerization unit. Since the question asks for a material balance in lb/h, we need to convert the volume flow rate to mass flow rate using the density of the output stream.
Assuming a density of 150 lb/ft3 for the output stream, the mass flow rate of the output stream would also be 150,000 lb/h, as the question does not provide any information about changes in mass during the isomerization process.
The material balance around the isomerization unit shows that 150,000 lb/h of light naphtha with an API gravity of 80 is fed into the unit, and the same amount of light naphtha is produced as the output stream.
Learn more about isomerization with the given link,
https://brainly.com/question/9116728
#SPJ11
The density of a gas depends on its molar mass. Under the same conditions, gases with molar masses less than air will float, while those with molar masses greater than the molar mass of air will sink in air. Air has the equivalent of a molar mass of 29 g/mole. How do you think that value was obtained?
The average molar mass of air is approximately 28.56 g/mol. However, this value is often rounded to 29 g/mol for simplicity.
The molar mass of air, which is approximately 29 g/mol, was obtained by calculating the average molar mass of the gases present in the atmosphere. The Earth's atmosphere is composed of various gases such as nitrogen (N2), oxygen (O2), carbon dioxide (CO2), and trace amounts of other gases.
To determine the molar mass of air, we consider the relative abundance of each gas and its molar mass. For example, nitrogen gas (N2) makes up about 78% of the atmosphere, while oxygen gas (O2) accounts for about 21%. The remaining gases, including carbon dioxide and others, have much lower concentrations.
We can calculate the average molar mass of air by multiplying the molar mass of each gas by its respective abundance, then summing these values. For instance, nitrogen has a molar mass of approximately 28 g/mol, while oxygen has a molar mass of around 32 g/mol. Multiplying the molar mass of nitrogen by its abundance (0.78) and the molar mass of oxygen by its abundance (0.21), we get:
(28 g/mol * 0.78) + (32 g/mol * 0.21) = 21.84 g/mol + 6.72 g/mol = 28.56 g/mol
Therefore, the average molar mass of air is approximately 28.56 g/mol. However, this value is often rounded to 29 g/mol for simplicity.
It's important to note that the molar mass of air can vary slightly depending on factors such as location, altitude, and atmospheric conditions. Nevertheless, 29 g/mol is a commonly accepted value used for calculations involving the density of gases.
learn more about mass on :
https://brainly.com/question/86444
#SPJ11
Answer the following questions: Q1: Calculate the angle between the [110] direction and the [111] direction for a monoclinic lattice with a=0.3 nm, b = 0.4 nm, c= 0.5 nm, and B = 107°. Q2: In a Hall-effect experiment, a current of 3.0 A sent length wise through a conductor 1.0 cm wide, 4.0 cm long, and 10 mm thick produces a transverse (across the width) Hall potential difference of 10 uV when a magnetic field of 1.5 T is passed perpendicularly through the thickness of the conductor. Find (a) the drift velocity of the charge carriers and (b) the number density of charge carriers. Q3: A uniform magnetic field keeps a proton moving around a circular path with a radius of 5m at a speed of 24 km/s. What is going to be the strength of the magnetic field? Q4: Using your knowledge of electronegativity, tell whether each of the following bonds will be ionic. a. H-H b. O-C1 c. Na-F d. C-N e. Cs-F f. Zn-ci
Q1: The angle between [110] and [111] directions in a monoclinic lattice with given parameters is approximately 42.87 degrees.
Q2: The drift velocity of charge carriers is 0.67 mm/s, and the number density of charge carriers is approximately 3.75 x [tex]10^20[/tex] carriers/[tex]m^3[/tex].
Q3: The strength of the magnetic field required to maintain the proton's circular path is approximately 0.768 T.
Q4: Bond types: a. nonpolar covalent b. polar covalent c. ionic d. polar covalent e. ionic f. polar covalent.
Q1: The angle between the [110] direction and the [111] direction for a monoclinic lattice with a=0.3 nm, b=0.4 nm, c=0.5 nm, and B=107° is approximately 42.87 degrees.
Q2: In the given Hall-effect experiment, the drift velocity of the charge carriers can be calculated using the formula v = (VH * t) / (B * d), where v is the drift velocity, VH is the Hall potential difference, t is the thickness of the conductor, B is the magnetic field strength, and d is the width of the conductor. Plugging in the values (VH = 10 uV, t = 10 mm, B = 1.5 T, d = 1.0 cm), we find that the drift velocity is approximately 0.67 mm/s.
To calculate the number density of charge carriers, we can use the formula n = (I * t) / (q * A * v), where n is the number density, I is the current, t is the thickness of the conductor, q is the charge of the carriers, A is the cross-sectional area of the conductor, and v is the drift velocity. Substituting the values (I = 3.0 A, t = 10 mm, q = 1.6 x [tex]10^-19[/tex] C, A = 1.0 cm * 10 mm), we find that the number density of charge carriers is approximately 3.75 x [tex]10^20[/tex] carriers/[tex]m^3[/tex].
Q3: The strength of the magnetic field required to keep a proton moving around a circular path with a radius of 5 m at a speed of 24 km/s can be determined using the formula B = (m * v) / (q * r), where B is the magnetic field strength, m is the mass of the particle, v is the velocity of the particle, q is the charge of the particle, and r is the radius of the circular path. Plugging in the values (m = 1.67 x [tex]10^-27[/tex] kg, v = 24 km/s = 24,000 m/s, q = [tex]1.6 x 10^-19[/tex] C, r = 5 m), we find that the strength of the magnetic field is approximately 0.768 T.
Q4: Using electronegativity values, we can determine the nature of the bonds in each case:
a. H-H: This bond is nonpolar covalent because the electronegativity difference between hydrogen atoms is negligible.
b. O-C: This bond is polar covalent because there is an electronegativity difference between oxygen and carbon atoms.
c. Na-F: This bond is ionic because there is a large electronegativity difference between sodium and fluorine atoms.
d. C-N: This bond is polar covalent because there is an electronegativity difference between carbon and nitrogen atoms.
e. Cs-F: This bond is ionic because there is a significant electronegativity difference between cesium and fluorine atoms.
f. Zn-Cl: This bond is polar covalent because there is an electronegativity difference between zinc and chlorine atoms.
Learn more about drift velocity
brainly.com/question/4269562
#SPJ11
The standard error of the difference between population proportions describes the result of subtracting one sample proportion from a second sample proportion. True False
False. The standard error of the difference between population proportions is a measure of the variability or uncertainty associated with the difference between two sample proportions.
The standard error is used when comparing proportions from two independent samples to determine if there is a statistically significant difference between them.
To calculate the standard error of the difference between population proportions, you need the sample proportions, the sample sizes, and assuming certain conditions are met, you can use the following formula:
SE = √[(p1 * (1 - p1) / n1) + (p2 * (1 - p2) / n2)]
where:
SE is the standard error of the difference between population proportions
p1 and p2 are the sample proportions from each sample
n1 and n2 are the sample sizes from each sample
This standard error is then used to calculate confidence intervals or perform hypothesis tests to make inferences about the difference between the two population proportions.
To know more about confidence intervals, click-
https://brainly.com/question/32546207
#SPJ11
Question 12. [10 Marks] For each of the following, determine whether it is valid or invalid. If valid then give a proof. If invalid then give a counter example. (a) BNC ≤A → (CA) n (B - A) is empty
(b) (AUB) - (An B) = A → B is empty
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid.
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid. To prove its validity, we can use a direct proof.
Proof:
Assume BNC ≤ A. We want to show that (CA) ∩ (B - A) is empty.
Let x be an arbitrary element in (CA) ∩ (B - A). This means x is in both CA and (B - A).
Since x is in CA, it implies that x is in C and x is in A.
Since x is in (B - A), it implies that x is in B but not in A.
Therefore, we have a contradiction because x cannot be both in A and not in A simultaneously.
Hence, the assumption BNC ≤ A must be false, which means BNC > A.
Therefore, the statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid. To show its invalidity, we can provide a counterexample.
Counterexample:
Let A = {1, 2} and B = {2, 3}.
(A ∪ B) - (A ∩ B) = {1, 2, 3} - {2} = {1, 3}
However, A = {1, 2} is not empty, but B = {3} is not empty.
Therefore, the statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid.
In summary:
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid, proven by a direct proof.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid, as shown by a counterexample.
Learn more about statement : brainly.com/question/27839142
#SPJ11
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid.
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid. To prove its validity, we can use a direct proof.
Assume BNC ≤ A. We want to show that (CA) ∩ (B - A) is empty.
Let x be an arbitrary element in (CA) ∩ (B - A). This means x is in both CA and (B - A).
Since x is in CA, it implies that x is in C and x is in A.
Since x is in (B - A), it implies that x is in B but not in A.
Therefore, we have a contradiction because x cannot be both in A and not in A simultaneously.
Hence, the assumption BNC ≤ A must be false, which means BNC > A.
Therefore, the statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid. To show its invalidity, we can provide a counterexample.
Counterexample:
Let A = {1, 2} and B = {2, 3}.
(A ∪ B) - (A ∩ B) = {1, 2, 3} - {2} = {1, 3}
However, A = {1, 2} is not empty, but B = {3} is not empty.
Therefore, the statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid.
In summary:
a) The statement BNC ≤ A → (CA) ∩ (B - A) is empty is valid, proven by a direct proof.
b) The statement (A ∪ B) - (A ∩ B) = A → B is empty is invalid, as shown by a counterexample.
Learn more about statement : brainly.com/question/27839142
#SPJ11
A compand that is a proton (H^+)donor is a ? a) solvent b) Salt c)acid d)base
A compound that is a proton (H^+) donor is an acid (c).
Acids are substances that can release hydrogen ions (H^+) when dissolved in water. These hydrogen ions are responsible for the characteristic properties of acids, such as their sour taste, ability to turn litmus paper red, and ability to react with bases to form salts. Acids can be classified as strong or weak based on the extent to which they dissociate and release hydrogen ions in solution.
When an acid dissolves in water, it donates a proton (H^+), which is essentially a hydrogen ion without its lone electron. This donation of a proton is the key characteristic of an acid. Examples of common acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), and acetic acid (CH3COOH).
In the given options, the correct answer is c) acid because acids are known to donate protons (H^+) in solution. Solvents (a) refer to substances that can dissolve other substances, salts (b) are compounds formed by the reaction between an acid and a base, and bases (d) are substances that can accept protons (H^+).
Learn more about Proton
brainly.com/question/12535409
#SPJ11
A point in rectangular coordinates is given. Convert the point to polar coordinates. Round your answers to two decimal places, >0.
(11,13)
Polar coordinates: (√11,-0.87)
Polar coordinates: (√11,0.87)
Polar coordinates: (√13,0.87)
Polar coordinates: (√290,-0.87)
Polar coordinates: (√290,0.87)
The polar coordinates of the point (11, 13) are (√290, 0.87). The first value represents the distance from the origin to the point
To convert a point from rectangular coordinates to polar coordinates, we can use the following formulas:
r = √(x² + y²)
θ = arctan(y/x)
Given the point (11, 13), we can plug the values into these formulas to find its polar coordinates.
First, let's calculate r:
r = √(11² + 13²)
r = √(121 + 169)
r = √290
Next, let's calculate θ:
θ = arctan(13/11)
θ ≈ 0.87 (rounded to two decimal places)
Therefore, the polar coordinates of the point (11, 13) are (√290, 0.87). The first value represents the distance from the origin to the point.
To know more about distance, click-
https://brainly.com/question/33716087
#SPJ11
The point (11,13) in rectangular coordinates can be converted to polar coordinates as (√290, 0.87). The first paragraph summarizes the answer, while the second paragraph provides an explanation.
In polar coordinates, a point is represented by its distance from the origin (denoted as r) and its angle (denoted as θ) with respect to the positive x-axis. To convert from rectangular coordinates (x, y) to polar coordinates, we can use the following formulas:
r = √(x² + y²)
θ = arctan(y / x)
For the given point (11, 13), we can calculate the distance from the origin as:
r = √(11² + 13²) = √(121 + 169) = √290
To find the angle θ, we use the arctan function:
θ = arctan(13 / 11) ≈ 0.87
Therefore, the polar coordinates of the point (11, 13) are (√290, 0.87), where the first value represents the distance from the origin, and the second value represents the angle in radians.
To learn more about coordinates refer:
https://brainly.com/question/31293074
#SPJ11
E = novuoksi (HOT 2900oksi) MEMBER AREASING AD & BC 5 ALL OTHER & BARS c tok w ro DETERMINE ABHORIZ.) FOR THE TRUSS stolun ABONE USING THE VIRTUAL TRUSS METHOD.
To determine the horizontal displacement of member AB in the truss using the Virtual Truss Method.
How can the horizontal displacement of member AB in the truss be determined using the Virtual Truss Method?The Virtual Truss Method is a technique used to analyze truss structures and determine the displacements of specific members. In this case, we are interested in finding the horizontal displacement of member AB.
To apply the Virtual Truss Method, we create a hypothetical truss by removing member AB from the original truss and replacing it with a virtual member.
The virtual member has the same properties and follows the same loading conditions as the original member.
By analyzing the forces and displacements in the virtual truss, we can determine the horizontal displacement of member AB.
The Virtual Truss Method utilizes the principle of superposition, where the total displacement of a structure is the sum of the displacements caused by each individual load.
By applying this principle to the virtual truss, we can isolate the displacement caused by the removal of member AB and determine its horizontal displacement.
To calculate the horizontal displacement, we can use equations of equilibrium and compatibility.
By considering the forces and displacements in the virtual truss, we can solve for the unknown displacement of member AB.
Learn more about Virtual Truss Method
brainly.com/question/13441222
#SPJ11
In a water treatment process alum coagulation jar test was performed and the following results are obtained. The optimum alum dose (mg/L) should be used in the treatment is nearly. (CLO 2) Container N
The jar test is performed to determine the optimum alum dose for water treatment. The specific value of the optimum dose cannot be determined without the detailed results of the jar test. Analyzing the clarity and settling of particles for different doses helps identify the most effective alum dose.
To determine the optimum alum dose, multiple jar tests are conducted using varying doses of alum. The jar test that produces the best results, such as the highest clarity and settling of particles, indicates the optimum dose that should be used in the actual water treatment process.
Without the specific details of the results obtained in the jar test, it is difficult to provide a precise answer. However, the optimum alum dose is typically determined by comparing the clarity and settling of particles for different doses of alum. The dose that achieves the best clarity and settling is considered the optimum.
In the given question, the result is mentioned as "nearly," which suggests that the specific value of the optimum alum dose is not provided. It is important to note that the optimum alum dose may vary depending on the characteristics of the water being treated, such as its turbidity and the types of impurities present.
To determine the optimum alum dose, it is necessary to analyze the jar test results and compare the clarity and settling for different doses of alum. This analysis helps identify the dose that provides the best water treatment efficiency.
learn more about water treatment from given link
https://brainly.com/question/13348717
#SPJ11
The use of geosynthetics has proven to be effective and practical for improving soil conditions for some categories of construction project especially for soft soil. EXPLAIN the concept behind the basic propose for typical uses and ground improvement especially for soft ground. Please
discuss ONE (1) case study that related to construction on soft ground and do the critical review.
Geosynthetics are materials used to improve soil conditions in construction projects, particularly in soft ground. They provide reinforcement, drainage, and separation. For soft ground, geosynthetics can increase soil stability, reduce settlement.
Case Study: The construction of a highway on soft ground utilized geosynthetics. Geogrids were placed in the soil to enhance its tensile strength and provide reinforcement. This allowed for thinner pavement layers, reducing construction costs and time. The geogrids also minimized differential settlement and improved the overall stability of the road. The project successfully addressed the challenges posed by the soft ground and achieved a durable and cost-effective solution.
Critical Review: The use of geosynthetics in the case study demonstrated their effectiveness in improving soft ground conditions for highway construction. The implementation of geogrids reduced settlement and increased stability, resulting in a durable road. However, the long-term performance and maintenance of the geosynthetics should be considered to ensure the sustainability of the solution.
Geosynthetics provide practical and effective solutions for improving soft ground conditions in construction projects. The case study highlighted their successful application in highway construction, enhancing stability, reducing settlement, and optimizing costs.
To know more about Geosynthetics visit:
https://brainly.com/question/33341029
#SPJ11
Use an ICE table to calculate what the equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M. Do not use any simplifying steps, do not use the 5% rule, and do not use small x approximation. In your work, show a balanced equilibrium equation and reference Ka value.
The equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is 0.0097 M.
The balanced equation for the ionization of citric acid is;
C6H8O7(aq) + 3H2O(l) ⇌ C6H5O7-(aq) + H3O+(aq) + 2H2O(l)K_a = 7.5 × 10^-4
Explanation: ICE Table can be defined as an Initial, Change and Equilibrium table. This table is used to calculate the concentration of products and reactants in a chemical reaction at equilibrium. This method is used to calculate the equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M. Let's begin by writing the balanced equation of the ionization of citric acid is;
C6H8O7(aq) + 3H2O(l) ⇌ C6H5O7-(aq) + H3O+(aq) + 2H2O(l)K_a
= 7.5 × 10^-4
The ICE table is; Initial Equilibrium ChangeC6H8O7 (aq) 0.35 M 0 M - x M3H2O (l) 0 0 + 3x MC6H5O7- (aq) 0 x MH3O+ (aq) 0 x M2H2O (l) 0 0 + 2x M
The equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is x. Thus the equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is 0.0097 M.
To know more about equilibrium visit:
brainly.com/question/33361891
#SPJ11
The equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is 0.0097 M.
The balanced equation for the ionization of citric acid is;
C6H8O7(aq) + 3H2O(l) ⇌ C6H5O7-(aq) + H3O+(aq) + 2H2O(l)K_a = 7.5 × [tex]10^{-4[/tex]
Explanation: ICE Table can be defined as an Initial, Change and Equilibrium table. This table is used to calculate the concentration of products and reactants in a chemical reaction at equilibrium. This method is used to calculate the equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M. Let's begin by writing the balanced equation of the ionization of citric acid is;
C6H8O7(aq) + 3H2O(l) ⇌ C6H5O7-(aq) + H3O+(aq) + 2H2O(l)K_a
= 7.5 × [tex]10^{-4[/tex]
The ICE table is; Initial Equilibrium ChangeC6H8O7 (aq) 0.35 M 0 M - x M3H2O (l) 0 0 + 3x MC6H5O7- (aq) 0 x MH3O+ (aq) 0 x M2H2O (l) 0 0 + 2x M
The equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is x. Thus the equilibrium concentration of H+ (aq) for citric acid (C6H8O7) at an initial concentration of 0.35 M is 0.0097 M.
To know more about equilibrium visit:
brainly.com/question/33361891
#SPJ11
solve proofs using the rules of replacement amd inference
1. ∼∼T⊃(∼S⊃S) 2. P⊃T//P⊃S 3. A⊃(W&D)//A⊃W
We have proved P⊃S using the given premises and rules of replacement and inference.
To solve these proofs using the rules of replacement and inference, we'll need to apply the given premises and use logical deductions to derive the desired conclusion. Let's break it down step by step:
1. Premise 1: ∼∼T⊃(∼S⊃S)
- We have a double negation on T (∼∼T).
- By applying the rule of double negation elimination, we can simplify it to T.
- Now we have T⊃(∼S⊃S).
2. Premise 2: P⊃T
- We have the implication P⊃T, which means if P is true, then T must be true as well.
3. Goal: P⊃S
- We need to derive the conclusion P⊃S based on the given premises.
Now let's use the rules of replacement and inference to prove the goal:
4. Assumption: P
- We assume P is true.
5. Modus Ponens (MP): From premise 2 (P⊃T) and assumption 4 (P), we can infer T.
- T
6. Modus Ponens (MP): From premise 1 (T⊃(∼S⊃S)) and inference 5 (T), we can infer (∼S⊃S).
- (∼S⊃S)
7. Modus Ponens (MP): From inference 6 (∼S⊃S) and assumption 4 (P), we can infer S.
- S
8. Conditional Proof (CP): Since assumption 4 (P) led us to S, we can conclude P⊃S.
- P⊃S
Therefore, we have successfully proved P⊃S using the given premises and rules of replacement and inference.
To learn more about inference
https://brainly.com/question/28347499
#SPJ11
In a horizontal circular pipe, water flows and the volume flow must be measured using
a throttle flange installed in the pipeline.
Provide all the basic connections required to get the volume flow. Name the quantities in
the equations. What magnitude needs to be measured?
Also express the general measuring principle in words.
The basic connections required to get the volume flow from a horizontal circular pipe are; one upstream tap and one downstream tap connected to a differential pressure sensor.
A throttle flange is installed in the pipeline to measure the volume flow of water. The throttle flange creates a localized reduction in the pipe's diameter, increasing the water's velocity and reducing its pressure.The differential pressure sensor measures the difference in pressure between the upstream and downstream taps. Using Bernoulli's equation, the volume flow rate of water through the pipe can be calculated. The equation is given by:
V = (Cv * √ΔP) / (ρ * √(1 - d^4 / D^4))
Where,V = volume flow rate of water
Cv = valve flow coefficient
ΔP = differential pressure
ρ = density of water
d = diameter of the throttle flange
D = diameter of the pipe
The magnitude that needs to be measured is the differential pressure across the throttle flange. The general measuring principle is to create a localized reduction in the pipe's diameter, increasing the water's velocity and reducing its pressure.
Thus, the basic connections required to get the volume flow from a horizontal circular pipe are; one upstream tap and one downstream tap connected to a differential pressure sensor.
To know more about differential pressure sensor, click here
https://brainly.com/question/31562056
#SPJ11
The mixing time tm in a stirred fermenter can be estimated using the following equation: pV tm=5,9 D 2/3 P D₁ Evaluate the mixing time in seconds for a vessel of diameter DT=2.3 m containing liquid volume V₁ = 10,000 litres stirred with an impeller of diameter D, = 45 in. The liquid density p=65 lb ft and the power dissipated by the impeller P = 0.70 metric horsepower. 2.5 Init conversion and dimen
The mixing time in seconds for a vessel of diameter DT=2.3 m is 150 seconds.
Given:
Diameter of the vessel, DT = 2.3 m
Liquid volume, V1 = 10,000 liters
= 10 m³
Impeller diameter, D2 = 45 in
= 1.143 m
Liquid density, p = 65 lb ft⁻³
Power dissipated by impeller, P = 0.70 metric horsepower
= 0.70 × 746
= 522.2
WNTU (Number of Transfer Units) = 2.5
Determine: Mixing time, tm in seconds
We can use the following equation to calculate the mixing time in a stirred fermenter:
pVtm = 5.9D(2/3)PD₁
We can rearrange this equation as follows:
tm = (5.9D(2/3)PD₁) / (pV)
Substituting the given values of the variables, we get
tm = (5.9 × 1.143(2/3) × 522.2 × 0.45) / (65 × 10)tm
= 0.0417 hours (since power is in horsepower, we converted to watts earlier)
tm = 2.5 minutes (since we have to convert hours to minutes)
tm = 150 seconds
Therefore, the mixing time in seconds for a vessel of diameter DT = 2.3 m containing liquid volume V₁ = 10,000 liters stirred with an impeller of diameter D, = 45 in, liquid density p = 65 lb ft⁻³, and the power dissipated by the impeller P = 0.70 metric horsepower is 150 seconds.
To know more about dissipated visit :
brainly.com/question/33435587
#SPJ11
Find the area of the region that is bounded by the line
f(x)=−x−3 and the curve g(x)=−x2−x+6 over the interval [−4,−2]
To find the area of the region bounded by the line f(x) = -x - 3 and the curve g(x) = -x^2 - x + 6 over the interval [-4, -2], we need to calculate the definite integral of the absolute difference between the two functions over that interval.
The absolute difference between the two functions can be represented as |g(x) - f(x)|. Therefore, the area A can be calculated as:
A = ∫[-4,-2] |g(x) - f(x)| dx
Let's calculate the values of g(x) - f(x) over the interval [-4, -2]:
g(x) - f(x) = (-x^2 - x + 6) - (-x - 3)
= -x^2 - x + 6 + x + 3
= -x^2 + 5
Now, we integrate the absolute difference |g(x) - f(x)| over the interval [-4, -2]: A = ∫[-4,-2] |-x^2 + 5| dx
To evaluate the integral, we split it into two parts based on the sign of x^2 + 5: A = ∫[-4,-2] (-x^2 + 5) dx, for -4 ≤ x ≤ -3
∫[-4,-2] (x^2 - 5) dx, for -3 ≤ x ≤ -2
Integrating each part separately and summing the results will give us the area A.
Learn more about interval here
https://brainly.com/question/30460486
#SPJ11
1. The value deducted from the revenue stream, which usually has no obligation toward covering expenses is called: 3. A. Royalty B. Operating Expenses C. Capital Investments D. Taxes 2.... ...are those unaffected by changes in activity level of production over a feasible range of operations for the capacity or capability available. A Variable Cos B. Fixed Cost C. Direct Cost D. Sunk Cost . is appropriate when benefits to be received from an asset are expected to remain constant over the asset's service life. A Straight Line Depreciation Method B. Declining Balance Depreciation Method C. Unit of Production Depreciation Method D. All of the above 4. The costs which can be specifically traced to or identified with a particular product are called: A Direct costs B. Fixed costs C. Indirect costs D. Variable costs 5. The primary purpose of depreciation is to provide for recovery of...that has been invested in the oil property. A Royalty B. Tax C. Capital D. Revenue 6. The oil and gas company receives a mineral interest if the negotiation is: A. Effective B. ineffective C. Unsuccessful D. All of the above 7 ...costs measures the opportunity which is sacrificed. A Direct B. Indirect C. Sunk D. Opportunity 8. The Construction of the project cash flow requires ..from a different references A Loan B. Tax C. Data D. Royalty
Fixed Cost are those unaffected by changes in activity level of production over a feasible range of operations for the capacity or capability available. Other methods are also explained.
1. The value deducted from the revenue stream, which usually has no obligation toward covering expenses is called: Royalty. Royalty refers to the payment that is made to an owner for the use of their patent, copyright, or other property. It is typically a percentage of revenue, which usually has no obligation toward covering expenses.
2. Fixed Cost refers to the expenses that remain the same regardless of the number of products or services produced or sold. They are those costs which remain constant over a feasible range of operations for the capacity or capability available.
3. Straight Line Depreciation Method is appropriate when benefits to be received from an asset are expected to remain constant over the asset's service life. The straight-line method is the most common method of depreciation. This method is appropriate when the benefits to be received from an asset are expected to remain constant over the asset's service life.
4. The costs which can be specifically traced to or identified with a particular product are called Direct costs. Direct costs refer to the expenses that can be specifically traced to a particular product or service.
5. The primary purpose of depreciation is to provide for recovery of capital that has been invested in the oil property. The primary purpose of depreciation is to provide for recovery of capital that has been invested in the oil property.
6. The oil and gas company receives a mineral interest if the negotiation is: Effective. The oil and gas company receives a mineral interest if the negotiation is effective.
7. Opportunity costs measure the opportunity which is sacrificed. Opportunity cost refers to the cost of a foregone alternative, or the benefits of the next best alternative that could have been chosen but wasn't.
8. The construction of the project cash flow requires Data from a different reference. The construction of the project cash flow requires data from a different reference.
Know more about the Straight Line Depreciation Method
https://brainly.com/question/27971176
#SPJ11
The four "R’s" of environmental sustainability does not include:
Group of answer choices
Recover
Rescind
Reduce
Recycle
The four "R’s" of environmental sustainability do not include Rescind.
What are the four R’s of environmental sustainability?
The four R’s of environmental sustainability are as follows:
Reduce
Reuse
Recycle
Recover
The four R's are used as a guide for living sustainably and reducing our impact on the environment.
Rescind is not a part of the four Rs of environmental sustainability.
What is the meaning of environmental sustainability?
Environmental sustainability is a broad term that refers to anything that can be done to protect the natural environment and resources, and reduce the negative human impact on the environment and promote the health and well-being of the planet.
Know more about four "R’s" of environmental sustainability here:
https://brainly.com/question/951805
#SPJ11
If the lengths AB=4cm, BC=5cm, and CD=9cm, calculate the length AC. Write your answer to 3 significant figures.
To find the length AC, use the Pythagorean Theorem, which states that for a right triangle, the sum of the squares of the legs (the shorter sides) equals the square of the hypotenuse (the longest side). So, the length of AC is 6.40 cm
The legs are AB and BC, while the hypotenuse is AC. Therefore, you can use the Pythagorean Theorem to calculate the length of AC. Then, add CD to the length of AC to obtain the length of AD. To summarize, we have the following steps:
Step 1: Use the Pythagorean Theorem to calculate the length of AC²AB² + BC² = AC²4² + 5² = AC²16 + 25 = AC²41AC² = 41AC = √41 = 6.403124237 (rounded to 3 significant figures)
Step 2: Add CD to the length of AC to find the length of ADAD = AC + CDAD = 6.403124237 + 9 = 15.40312424 (rounded to 3 significant figures). Therefore, the length of AC is 6.40 cm (rounded to 3 significant figures).
For more questions on: Pythagorean Theorem
https://brainly.com/question/343682
#SPJ8