Green is represented with an absorption wavelength of 500 nm. As a result, it will absorb green and display red, which is complementary to green.
What is the electromagnetic spectrum?
The electromagnetic spectrum is made up of the many wavelengths and associated frequencies of light. The speed of light constantly establishes a relationship between shorter frequencies and longer wavelengths. Because they have the shortest wavelengths, gamma rays can ionize material. The longest lengths are found in radio waves, whose wavelengths can exceed 100,000 km.
Between the ultraviolet and infrared spectra, the visible spectrum has wavelengths.
This is a reference to spectroscopic techniques that calculate how much radiation interacts with a substance, depending on its frequency or wavelength, and how much of that radiation is absorbed. Absorption spectroscopy utilizes the full electromagnetic spectrum.
So, the correct option is green.
To learn more about the electromagnetic spectrum follow the link:
https://brainly.com/question/29431060
#SPJ4
Look closely at the Sodium square below the table. Using the information in the square and the position of Sodium on the periodic table, describe sodium atoms with as much detail as you can. Below is a word bank. These are words that can help you with your description. You do not have to use all of them, but you should use some of them. DO NOT just define the words, use the words in your description. Make sure you are writing your OWN words. No copying and pasting. Word bank: protons, neutrons, electrons, atomic mass, atomic number, valence electrons, energy levels, group, period, metal, non-metal, metalloid
Metal x loses 3 electrons. The resulting charge of Metal X is
Answer:
the correct answer is 5
Explanation:
i just know
three students are asked to discuss why some molecules move further than others do on a chromatogram in the same amount of time. which student employs correct scientific reasoning?
Student 1 states that the molecules that are larger in size and are more attracted to the solvent will move further along the TLC plate employing the correct specific reasoning.
Why do some substances move further up the TLC plate than others?
Larger molecules take longer to move up the chromatography paper or TLC plate, whereas smaller molecules are more mobile. Likewise, the polarity of the molecules can affect how far the spots travel, depending on the type of solvent used.
What factor determines which molecules travel further in chromatography?
The stronger a compound is bound to the adsorbent, the slower it moves up the TLC plate. Non-polar compounds move up the plate most rapidly (higher Rf value), whereas polar substances travel up the TLC plate slowly or not at all (lower Rf value).
Thus, the molecules larger in size are more attracted to solvent will move further along the TLC plate is the reason why molecules move further than others in a chromatogram. So, student 1 is the correct option.
To know more about chromatogram :
https://brainly.com/question/1394204
#SPJ4
5- Charlotte throws 5 darts and they all end up in the outer ring of the dart board. Describe her:
Precision-ne Shot
Accuracy:
The Charlotte throws 5 darts and they all end up in the outer ring of the dart board is they are neither precise nor accurate.
Precise is defined as how close the measurement are with one another. Accuracy is defined as how the measurement is close to the correct value. if all the dart is close to each other but not on bullseye than it is high precise and low accurate. if the the dart are in the bullseyes and close to each other it is said to be high precise and high accurate.
Thus, The Charlotte throws 5 darts and they all end up in the outer ring of the dart board is they are neither precise nor accurate.
To learn more about precise and accurate here
https://brainly.com/question/28289139
#SPJ1
97.19 ml of 1.527 m sodium chloride (aq) is added to 111.84 ml of 1.923 m silver sulfate (ag2so4). after the reaction is complete, what is the mass of precipitate that has formed?
61.62 g of precipitate of AgCl is formed after the reaction is complete
As we know the formula :
M = n / V
where
M = Molarity
n= no of moles
V = volume ( in litres)
Concentration of NaCl = 1.527 M = 1.527 mol/L
Volume of NaCl solution = 97.19 ml = 97.19 /1000
= 0.09719 L
Number of moles of NaCl
= 1.527 mol/L × 0.09719 L
= 0.148 mol
Concentration of Ag2SO4 = 1.923M = 1.923 mol/L
Volume of Ag2SO4 solution = 111.84 ml = 111.84/1000
= 0.11184 L
Number of moles of Ag2SO4
= 1.923 mol/L × 0.11184 L
= 0.215 mol
Balanced equation:
Ag2SO4 (aq) + 2 NaCl (aq) -->2 AgCl (s) [precipitate] + Na2SO4 (aq)
1 mol of Ag2SO4 reacts with 2 moles of NaCl produces 2 moles of AgCl,
then 0.215 mols of Ag2SO4 will react with 2 × 0.215 moles = 0.43 moles of NaCl will produce 0.43 moles of AgCl
Molar mass of AgCl = 143.32 g/mol
Mass of precipitate formed = no of moles× molar mass
= 0.43 mol × 143.32 g/mol = 61.62 g
learn more about Molarity at https://brainly.com/question/24305514
#SPJ4
Reasons as to why the carbon electrodes require continual replacement
Carbon electrodes are changed frequently in electrolysis as the carbon in the carbon electrodes burns to give out Carbon-di-oxide.
Carbon electrodes are used in electrolysis to facilitate the transfer of electrons between the anode and the cathode. The carbon electrode is usually in the form of a rod or plate and is electrically connected to the anode.
The carbon electrode may also be used to help reduce the overall resistance of the electrolytic cell.
Carbon electrodes are used in electrolysis because they are chemically inert and have a high electrical conductivity.
However, carbon electrodes must be changed frequently because they become corroded and lose their electrical conductivity over time.
This is because carbon burns out in the Carbon electrodes to give out Carbon-di-oxide. That is why the carbon anodes should be changed frequently.
To know more about electrolysis, click below:
brainly.com/question/12994141
#SPJ1
what is the anion name for telluric acid
The anion name for telluric acid is TeO₃²⁻ is tellurite ion
Anion are ion that are negatively charged and ion are charged atom or molecule and if a balanced atom loses one or more electron and it will become positively charged cation and if balanced atom gain one or more electron it will become negatively charged anion and in the telluric acid means H₆O₆Te and the anion are formed TeO₃²⁻ is called as tellurite ion and telluric acid as tellurium source in the synthesis of oxidation catalyst
Know more about telluric acid
https://brainly.com/question/28627841
#SPJ1
george determines the mass of his evaporating dish to be 7.548 g. he adds a solid sample to the evaporating dish, and the mass of them combined is 23.766 g. what must be the mass of his solid sample? express your response to three digits after the decimal.
The data is provided as follows.
The evaporating dish's mass is 3.375 g.
total mass = mass of the solid sample plus the evaporating dish
Specifically, 26.719 g (Mass of solid sample + evaporating dish)
So, using the following formula, we can determine the mass of the solid sample.
mass of evaporating dish = (mass of evaporating dish - mass of solid sample)
= 26.719 g – 3.375 g
= 23.344 g
This leads us to the conclusion that his solid sample's mass must be 23.344 g.
What is Evaporating dish ?A piece of glassware used in laboratories called an evaporating dish is used to evaporate solutions and supernatant liquids, sometimes to the point of melting.
The main significant distinction between an evaporating dish and a watch glass is that a watch glass typically lacks sides and rims and resembles a contact lens more in terms of shape. The reason behind the name of these objects is that they mimic the glass case of a wristwatch.
To know more about Evaporating dish please click here ; https://brainly.com/question/23131911
#SPJ4
A region of a polypeptide that folds in a particular way, relatively independently of the rest of the molecule, is a folding:
exon.
lariat.
region.
segment.
domain.
A region of a polypeptide that folds in a particular way, relatively independently of the rest of the molecule, is a folding domain.
Thus, the correct option is E.
What is a domain?Domains as known tertiаry structures are the folding of the secondаry structure into distinct аrrаngements. The tertiаry structure of а protein describes the mаnner in which the secondаry structurаl elements аre аrrаnged in three dimensions to creаte а stаble moleculаr entity. In mаny cаses, it is convenient to describe а protein in terms of regions of the polypeptide chаin thаt might fold аutonomously. These regions аre cаlled domаins аnd much of the discussion of tertiаry structure centres on the clаssificаtion of these units of protein structure.
For more information about polypeptides refer to the link:
https://brainly.com/question/28495042
#SPJ4
How many atoms does K2Zn02 have?
Based on the number of atoms in 1 mole of a substance, the number of atoms in 1 mole of K₂ZnO₂ is 3.01 * 10²⁴ atoms.
What are atoms?Atoms are the smallest particle of an element that can exist and still retain the properties of that element.
Atoms of elements take part in chemical reactions.
The number of atoms in a mole of a substance is equal to 6.03 * 10²³.
In 1 mole of the compound K₂ZnO₂:
there are 2 moles of K atoms = 6.03 * 10²³ * 2 atoms
there are 1 mole of Zn atoms =6.03 * 10²³ atoms
There are 2 moles of O atoms = 6.03 * 10²³ * 2 atoms
Total number of atoms in 1 mole of K₂ZnO₂ = 3.01 * 10²⁴ atoms.
Learn more about atoms at: https://brainly.com/question/441927
#SPJ1
Decribe a method for making pure crytal of magneium chloride from magneium and dilute hydrochloric acid
A method for making pure crystal of magnesium chloride from magnesium and dilute hydrochloric acid can be done using filter paper.
How pure crystal of magnesium chloride can be obtained from magnesium and dilute hydrochloric acid ?For this method, use a filter paper and funnel.
As, magnesium chloride is in aqueous form, it will come out with the filtrate(solution).
take hydrochloric acid in beaker:
• Keep adding small pieces of magnesium ribbon, until magnesium is in excess
• filter using filter paper and funnel and filter excess magnesium
• pour the solution into evaporating basin
• and then heat using Bunsen burner
• leave it to crystallize
evaporate or boil off the water
• then decant solution
• finally pat dry using filter paper.
To know more about magnesium chloride, refer
https://brainly.com/question/26227142
#SPJ4
How much heat is needed to raise the temperature of a 5. 0 gram block of aluminum from 22. 0°c to 37. 0°c?.
The required heat in this case id 68J
Aluminum is an element with the atomic symbol Al, and the atomic number of this element is 13 in the periodic table. Aluminum is weaker than steel, and also it is less dense than steel.
specific heat, is the quantity of heat required to raise the temperature of one gram of a substance by one degree celsius. The units of specific heat are usually calories or joules per gram per Celsius degree.
When there is change of heat the expression used will be;
Q = mCΔT
Where m = 5 grams, ΔT = 37[tex]^oC[/tex] - 22[tex]^oC[/tex] ⇒ 15[tex]^oC[/tex], C = 0.900J
Q = 5 × 0.900 × 15
= 68 J
Therefore the required heat in this case is 68J
To know more about heat
https://brainly.com/question/9660704
#SPJ4
defintion of producer
Answer:
a producer is an organisms that produce food for themselves and other organisms.
The acceleration of a runner is 12 m/s². The force exerted on the starting
blocks is 700 N. What is the mass of the runner?
10
which isotopes would you expect to be stable?
Isotopes of elements having atomic number less than 20 and with a neutron to proton ratio of close to 1 are more likely to be stable.
What is an isotope?
Isotopes are two or more atom kinds that share the same atomic number (protons in the nucleus), placement in the periodic table, and chemical element but have distinct nucleon numbers (mass numbers) as a result of possessing a different quantities of neutrons in their nuclei. Although the chemical properties of each isotope of a given element are nearly identical, they differ in their atomic weights and physical characteristics. The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. The mass number of an atom is determined by the quantity of nucleons—both protons and neutrons—in its nucleus, and it varies for each isotope of a given element.
Isotopes of elements having atomic number less than 20 and with a neutron to proton ratio of close to 1 are more likely to be stable.
To learn more about an isotope, click on the link
https://brainly.com/question/1401027
#SPJ4
A cup of coffee has a hydroxide ion concentration of 1. 0 × 10−10 m. What is the ph of this coffee?.
The coffee's pH will be 10.
What does pH refer to?
An aqueous solution's acidity or basicity can be determined using the pH scale, which previously stood for "potential of hydrogen." In comparison to basic or alkaline solutions, acidic solutions are measured to have lower pH values.pH = pH3O+because hydrogen ions attach to water molecules for form hydronium ions.
To calculate the pH of a solution, use the equation
pH = − log [H3O+]
Since we are given the hydronium ion (H3O+) concentration of the solution, we can plug this value into the formula.
pH = −log[ 1.00 × 10^−10M]
pH = 10
Hence, The pH of this solution is 10
To learn more about ion concentration here :
brainly.com/question/4617925
#SPJ4
Solve the subgame on the left, where the Religious Party is moderate, as if there were no uncertainty. What is the subgame perfect Nash equilibrium? Note: write the equilibrium in the form (Regime’s move; Moderate party’s move).
The subgame perfect Nash equilibrium is to hold elections to pursue the moderate policy.
A perfect Nash equilibrium for a subgame is usually derived from the game's various final outcomes by backward induction eliminating branches where each player makes incredible moves from that node. The main difference between subgame perfect equilibrium and Nash equilibrium is that subgame perfect equilibrium requires all threats to be reliable.
Therefore, the study of the perfect balance of subgames is a reliable threat study. Subgame perfect equilibria are a subset of Nash equilibria. A Nash equilibrium of an extended game is a subgame perfect equilibrium if every subgame induces a Nash equilibrium game. A Nash equilibrium in which no part of the player's strategy contains incredible threats or promises is called a complete subgame.
Learn more about Nash equilibrium here:-https://brainly.com/question/7141724
#SPJ4
distillation is the separation of multiple
Distillation is the separation of multiple liquids. it means the selective boiling and subsequent condensation of a component in a liquid mixture.
Distillation It is a separate technique that can be used either to increase the concentration of a particular component in a mixture or to obtain pure components from a mixture.
The process of distillation takes advantage of the difference in boiling points of the components in a liquid mixture by converting one of them into a gaseous state. Distillation is not a chemical reaction but can be considered a physical separation process.
To know more about boiling point click here:
https://brainly.com/question/25777663
#SPJ4
Organic molecules form _________ bonds and inorganic compounds form _________ bonds.
Organic molecules form covalent bonds and inorganic compounds form ionic bonds.
What are ionic and covalent bonds?
The main interaction in ionic compounds is ionic bonding, a type of chemical bonding that involves the electrostatic attraction between two atoms or ions with dramatically different electronegativities.
A chemical link known as a covalent bond includes the sharing of electrons between atoms to generate electron pairs. Covalent bonding is the stable equilibrium of the forces of attraction and repulsion between atoms when they share electrons.
Inorganic compounds have ionic bonds. There is always an ion-dipole attraction when inorganic compounds are combined with water, meaning the ions are solvated (hydrated)
Covalent bonding is frequently seen in molecules containing carbon, usually known as organic compounds. The two atoms' common pair of electrons has now extended around their nucleus, resulting in the formation of a molecule.
Learn more about topic ionic and covalent bonds: https://brainly.com/question/11527546
#SPJ4
If 50.0 g of silicon dioxide (SiO2) is heated with 40 g of carbon, 27.9 g of silicon carbide is produced in chemistry lab according to the following balanced equation: SiO2(s) + 3C(s) = SiC(s) + 2CO(g) What is the percent yield of this reaction?
Taking into account definition of percent yield, the percent yield of the reaction is 62.78%.
Reaction stoichiometryIn first place, the balanced reaction is:
SiO₂(s) + 3 C(s) = SiC(s) + 2 CO(g)
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
SiO₂: 1 moleC: 3 molesSiC: 1 mole CO: 2 molesThe molar mass of the compounds is:
SiO₂: 44 g/moleC: 12 g/moleSiC: 40 g/moleCO: 28 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
SiO₂: 1 moles ×44 g/mole= 44 gramsC: 3 moles ×12 g/mole= 36 gramsSiC: 1 mole ×40 g/mole= 40 gramsCO: 2 moles ×28 g/mole= 56 gramsLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 44 grams of SiO₂ reacts with 36 grams of C, 50 grams of SiO₂ reacts with how much mass of C?
mass of C= (50 grams of SiO₂×36 grams of C)÷ 44 grams of SiO₂
mass of C= 40.91 grams
But 40.91 grams of C are not available, 40 grams are available. Since you have less mass than you need to react with 50 grams of SiO₂, C will be the limiting reagent.
Percent yieldThe percent yield is the ratio of the actual return to the theoretical return expressed as a percentage.
The percent yield is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:
percent yield= (actual yield÷ theoretical yield)× 100%
where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product, that is, it is the maximum amount of product that could be formed from the given amounts of reagents.
Theoretical mass of SiCConsidering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 36 grams of C form 40 grams of SiC, 40 grams of C form how much mass of SiC?
mass of SiC= (40 grams of C×40 grams of SiC) ÷36 grams of C
mass of SiC= 44.44 grams
The theoretical yield of SiC is 44.44 grams.
Percent yield for the reaction in this caseIn this case, you know:
actual yield= 27.9 gramstheorical yield= 44.44 gramsReplacing in the definition of percent yield:
percent yield= (27.9 grams÷ 44.44 grams)× 100%
Solving:
percent yield= 62.78%
Finally, the percent yield is 62.78%.
Learn more about percent yield:
brainly.com/question/14408642
#SPJ1
Given the unbalanced equation:
_MnO₂ + _HCI → _MnCl₂ + _H₂O + _Cl₂
When the equation is balanced using the smallest
whole number coefficients, the coefficient of HCI is
Answer:
4
Explanation:
Having the coefficient 4 in front of HCl and the coefficient 2 in front of H₂O balances out the equation.
If the pressure of a gas is tripled and the absolute temperature of the gas is quadrupled, by what factor will the volume of the gas change?.
If the pressure of a gas is tripled and the absolute temperature of the gas is quadrupled then volume of the gas change is 4/3
Volume is the space occupied within the boundaries of an object in three dimensional space
Here the relationship between pressure volume and temprature can be expressed as
PV/T
And then
P₁V₁/T₁ = P₂V₂/T₂
So in this case P₁V₁T₁ are equal to 1 and have the pressure triple so that P₂ = 3 and the temprature quadrupled so that T₂ = 4 and then we have to calculate V₂ = ?
(1)(1)/1 = (3)V₂ /4
1 = 3/4 V₂
1(4/3) = (3/4) V₂ 4/3
V₂ = 4/3
Know more about volume
https://brainly.com/question/29411579
#SPJ4
how many molecules of oxygen are produced when 43g of h2o decompose
6.9×10^23 molecules of oxygen are produced when 43g of h2o decompose.
2H20⇆O2+2H2
given mass,H2O=43 g
molar mass H2O=18 g
moles=given mass/molar mass
moles=43/18
moles=2.3 mol
molecules of oxygen= 2.3/2=1.15 mol
molecules of oxygen=1.15 mol×6.022×10^23
molecules of oxygen=6.9×10^23 molecules.
The non-metallic chemical element oxygen is found in Group 16 of the periodic table, generally known as the oxygen group (O). All living creatures require the colorless, tasteless, and odorless gas known as oxygen. When plants use it as a source of carbon and release the oxygen back into the environment, plants utilise the carbon dioxide that animals have taken up and converted it into.
Oxygen may react with almost every other element to form compounds in addition to reactions that remove elements from their combinations with one another. Combustions are the name for these reactions, which are typically accompanied by the creation of heat and light. The most important component is water.
To know more about molecular oxygen visit : brainly.com/question/11587330
#SPJ1
Draw a structural formula for the product of this diels-alder reaction, including all stereoisomers of the product.
The product formed in the Diels-Alder reaction is given below. It is a (4+2) addition and a cis-product is formed.
Two organizations in a molecule can be distinctive and, if changed, generate compounds that are stereoisomers. A magnetic interaction arises among two debris such as hydrogen nuclei with non-0 spin. when two enantiomers have exclusive charges of reaction. A not-unusual instance of a pair of enantiomers is dextro lactic acid and laevo lactic acid.
The definition of a stereoisomer is any of a group of isomers wherein atoms are linked inside the identical order but fluctuate in their spatial association. In stereoisomerism, the atoms making up the isomers are joined up inside the identical order, but nevertheless, control to have an exceptional spatial arrangement. Geometric isomerism is one form of stereoisomerism. these isomers arise when you have confined rotation someplace in a molecule.
Learn more about Stereoisomers here:-https://brainly.com/question/24128816
#SPJ4
An electric drill pulls 1000 joules per second or electrical energy from
the wall. The drill bit only exerts 555 joules of energy on the wood it's
drilling through. Where did all the extra energy go?
All of the energy stored or applied on a body cannot be converted tono work done only the available form of energy is converted to work. The remaining part is called unavailable energy which is stored on the body or taken as increase in entropy.
What is unavailable energy?According to thermodynamic concepts, the not all the energy can be converted into useful work .Or in other words only available energy can be converted to work. This available form of energy is called Gibbs energy.
For instance if we take a heat engine, the heat from the hot body is not completely transferred into colder body. According to third law of thermodynamics, this unavailable work is being considered as gone for increase in entropy.
Therefore, only available energy of the electric drill can be changed to work done and that is 222 J out of 1000 J, remaining goes for an increase in entropy of the system.
To find more on entropy, refer here:
https://brainly.com/question/24278877
#SPJ1
a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it. calculate the molarity and
The molarity when a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it is 0.185 M and 0.3645 g
As we know the formula of Resveratrol
C14H12O3
We know the molar mass is 228 g/mol
Mole of resveratol is 19/228=0.083 g
So, the molarity of the Solution is 0.083/0.45=0.185 L
Now as we know molality mole of the solute mass of solvent
volume of solvent = 450 ml
Molality is the mass of solute upon the mass of solvent
M=0.81X450=0.3645 kg
Learn more about molarity at:
https://brainly.com/question/8732513
#SPJ4
which of the following relationship is used to calculate one from the other, process capability index, cp and process capability ratio, cr.
The relationship between process capability index, Cp and process capability ratio, Cr is given as Cp = 1/Cr.
In statistics, process capability index is used to measure the variations or changes that occur in a process.
In general, the it lies between the specification limits which are also held in check while performing the Process capability index.
As we know that different processes has different optimal situations which help us to contrast the processes and also help us to identify if the obtained results meet our expectations.
Simply put, Process capability index also called process capability ratio is a statistical measurement method to identify the possible variations in a process.
If you need to learn more about capability index click here:
https://brainly.com/question/24322347
#SPJ4
fewer steps are required to solve stoichiometry problems when group of answer choices the amount of reactant is given in grams and the product is sought in grams. the amount of reactant is given in moles and the product is sought in moles. the amount reactant is given in grams and the product is sought in liters.
To solve the stoichiometry problems we need the amount of reactants given in mole and the product is sought in mole. We use it because then all we have to do is the mole ratio from the balanced chemical equation to solve the problem
The option B is correct.
What do you mean by Stoichiometry ?
Stoichiometry can be defined as the quantitative relationships or ratios between two or more substances undergoing a physical change or chemical change. Jeremias Benjaim Richter defined stoichiometry in 1792 as the science of measuring quantities or mass ratios of chemical elements. It is the study of mass relations
It can be analyzed by
Balancing equationsConverting between grams and molesCalculating molar massCalculating mole ratiosTo know more about Stoichiometry from the given link
https://brainly.com/question/14935523
#SPJ4
A 0.940g sample of barium chloride is heated and 0.800g of anhydrous residue remains after cooling. How many moles of anhydrous barium chloride were present in the sample? How many moles of water were present in the sample?
Answer: (0.800g BaCl2) / (208.233g BaCl2/mol) =
0.00384 mol BaCl2
Explanation: Hope this helps :)
The number of moles of anhydrous barium chloride is equal to 3.84 ×10⁻³ mol and the number of moles of water is equal to 7.78 ×10⁻³ mol.
What is a mole?A mole can be described as a standard unit that is used to determine the number of atoms, molecules, ions, or other particular particles in the given mass of the substance. The mass of one mole of any chemical element is known as atomic mass and that of any chemical compound is called the molar mass of that compound.
Given the chemical reaction of decomposition of barium chloride:
[tex]BaCl_2.2H_2O\longrightarrow BaCl_2 +2H_2O[/tex]
Given the mass of the hydrated barium chloride = 0.940 g
The mass of the anhydrous barium chloride = 0.800 g
The molar mass of the anhydrous barium chloride = 208.23 g/mol
The number of moles (n) of anhydrous barium chloride = 0.800/208.23
n = 3.84 ×10⁻³ mol
The mass of the water = Mass of hydrated barium chloride - anhydrous barium chloride
Mass of water = 0.940 -0.800 = 0.14 g
The number of moles of water = 0.14/18 = 7.78 ×10⁻³ mol
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
Which of the following were goals of Reconstruction? Check all of the boxes that apply. to reincorporate the South into the Unionto create a segregated society in the Southto establish equality under law for African Americansto assist African Americans in the transition from slavery to freedom
The following were the goals of reconstruction is to reincorporate the south into the union, to establish the equality under law for African Americans, and to assist the African Americans in the transition from slavery to freedom.
In the reconstruction the period includes civil war and the southern states defeated confederation. reconstruction was basically period of political crisis . The major drawback is that the African American never be equal on economic equality with the whites.
Thus, The following were the goals of reconstruction is to reincorporate the south into the union, to establish the equality under law for African Americans, and to assist the African Americans in the transition from slavery to freedom.
To learn more about reconstruction here
https://brainly.com/question/13472974
#SPJ1