Answer: The correct option is a. 6.99 x 10⁻⁴ kg/m³.
Work to elevate a single N₂ molecule to this distance = 5.7536 x 10⁻²³ Jm
N2 = 2.32 x 10⁻²⁶kg
Pluto Atmospheric Pressure = 1.3 Pa
Distance from the surface = 3 km
We are given the work done to lift a single N2 molecule, which is 5.7536 x 10⁻²³ J.
Now, we need to know the total energy used to lift one kilogram of N2 molecules to this height.
Since the mass of one N2 molecule is 2.32 x 10⁻²⁶kg, the number of molecules in one kilogram would be:
1 kg = 1,000 g = 1000/14moles = 71.43 moles.
In one mole, there are 6.022 x 10²³ molecules.
Therefore, in 71.43 moles, the number of N₂ molecules would be:71.43 moles x 6.022 x 10²³ molecules per mole
= 4.29 x 10²⁶ molecules of N₂.
Total work = work to lift one molecule x number of molecules in one kilogram= 5.7536 x 10⁻²³ J/molecule x 4.29 x 10²⁶ molecules/kg= 2.466 x 10³ J/kg.
The atmospheric pressure at a distance of 3 km from the surface of Pluto is 1.3 Pa.
Using the ideal gas law, PV = nRT,
where P is pressure, V is volume, n is the number of moles, R is the gas constant and T is temperature.
The mass of one N₂ molecule, m. N₂ is given as 2.32 x 10⁻²⁶ kg.
Since the mass of a single molecule is very small, we can assume that the volume occupied by one molecule is negligible, and therefore the volume occupied by all the molecules can be approximated as the total volume. The number of moles of N₂ gas in 1 kg would be:1 kg = 1000 g / (28 g/mol) = 35.71 moles.
Therefore, the number of molecules would be: 35.71 moles x 6.022 x 10²³ molecules/mole
= 2.15 x 10²⁶ molecules of N₂. The volume occupied by all the N2 molecules in 1 kg would be:,
V = nRT/P
= (35.71 x 8.314 x 55)/(1.3)
= 1.53 x 10³ m³.
The density of N₂ gas in 1 kg would be:
p = m/V = 1/1.53 x 10³
= 6.54 x 10⁻⁴ kg/m³.
Therefore, the atmospheric density at this elevation is 6.54 x 10⁻⁴ kg/m³.
Answer: The correct option is a. 6.99 x 10⁻⁴ kg/m³.
Learn more about ideal gas law: https://brainly.com/question/27870704
#SPJ11
Task 3
Explain how diodes, BJTs and JFETs work. You must include reference
to electrons, holes, depletion regions and forward and reverse
biasing.
Diodes: Diodes are devices that allow the current to pass in only one direction while restricting it in the other direction. They are constructed by combining P-type and N-type semiconductors in close proximity. The flow of electrons in diodes is from the N-type material to the P-type material. The depletion region is an insulator layer that is formed between the two types of semiconductors when the diode is forward-biased.
Bipolar Junction Transistors: BJTs are constructed using P-type and N-type semiconductors, much like diodes. They have three different regions: the emitter, the base, and the collector. When the base-emitter junction is forward-biased, the emitter injects electrons into the base region. Then, by applying a positive voltage to the collector, the electrons travel through the base-collector junction and into the collector.
Junction Field-Effect Transistors: JFETs are also constructed using P-type and N-type semiconductors. They work by creating a depletion region between the P-type and N-type materials that control the flow of electrons. A voltage applied to the gate creates an electric field that modulates the width of the depletion region. The gate voltage controls the flow of electrons from the source to drain when the device is in saturation.
Reference: N. W. Emanetoglu, "Semiconductor device fundamentals", International Conference on Applied Electronics, Pilsen, Czech Republic, 2012, pp. 233-238.
know more about Diodes
https://brainly.com/question/32724419
#SPJ11
Over a certain region of space, the electric potential function is V = 5x - 3x²y + 2y z². What is the electric field at the point P, which has coordinates (1,0,2). B. - 1+k A. 61-2k I
The electric field at point P is B. -1 + k. To find the electric field at a given point, we need to take the negative gradient of the electric potential function. The electric field vector is given by:
E = -∇V
Where ∇ is the del operator (gradient operator).
In this case, the electric potential function is V = 5x - 3x²y + 2y z².
To find ∇V, we need to take the partial derivatives of V with respect to each coordinate variable (x, y, and z).
∂V/∂x = 5 - 6xy
∂V/∂y = -3x² + 2z²
∂V/∂z = 4yz
Now, we can evaluate these partial derivatives at the point P(1, 0, 2):
∂V/∂x = 5 - 6(1)(0) = 5
∂V/∂y = -3(1)² + 2(2)² = -3 + 8 = 5
∂V/∂z = 4(0)(2) = 0
Therefore, the electric field vector at point P is:
E = -∇V = -(∂V/∂x)i - (∂V/∂y)j - (∂V/∂z)k = -5i - 5j - 0k = -5(i + j)
So, the magnitude of the electric field is |E| = 5√2 and the direction is in the (-i - j) direction.
Therefore, the electric field at point P is B. -1 + k.
To know more about The electric field
brainly.com/question/30544719
#SPJ11
Use the straw model to explain what resistance is and how it depends on the length and cross sectional area
The straw model can be used to explain resistance in terms of electrical circuits. Imagine a straw through which water is flowing. The water experiences resistance as it passes through the straw, which makes it harder for the water to flow. Similarly, in an electrical circuit, the flow of electric current encounters resistance, which hinders its flow.
Resistance (R) is a measure of how much a material or component opposes the flow of electric current. It depends on two main factors: length (L) and cross-sectional area (A) of the conductor.
1. Length (L): The longer the conductor, the higher the resistance. This is because a longer path creates more collisions between the moving electrons and the atoms of the material, increasing the overall opposition to the flow of current. As a result, resistance increases proportionally with the length of the conductor.
2. Cross-sectional area (A): The larger the cross-sectional area of the conductor, the lower the resistance. A larger area allows more space for electrons to flow, reducing the likelihood of collisions with the atoms of the material. Consequently, resistance decreases as the cross-sectional area of the conductor increases.
Mathematically, resistance can be expressed using Ohm's Law:
R = ρ * (L/A),
where ρ (rho) is the resistivity of the material, a constant specific to each material, and (L/A) represents the length-to-cross-sectional area ratio.
In summary, resistance in an electrical circuit depends on the length of the conductor (directly proportional) and the cross-sectional area (inversely proportional). A longer conductor increases resistance, while a larger cross-sectional area decreases resistance.
To know more about Resistance.
https://brainly.com/question/14023824
#SPJ11
A nucleus contains 70 protons and 109 neutrons and has a binding energy per nucleon of 1.99 MeV. What is the mass of the neutral atom ( in atomic mass units u)? proton mass 1.007277u H = 1.007825u In n = 1.008665u U = 931.494MeV/c²
The mass of the neutral atom can be calculated by adding the masses of its protons and neutrons, taking into account the binding energy per nucleon. In this case, a nucleus with 70 protons and 109 neutrons and a binding energy of 1.99 MeV per nucleon will have a mass of approximately 184.43 atomic mass units (u).
To calculate the mass of the neutral atom, we need to consider the mass of its protons and neutrons, as well as the binding energy per nucleon. The mass of a proton is approximately 1.007277 atomic mass units (u), and the mass of a neutron is approximately 1.008665 atomic mass units (u).
Given that the nucleus contains 70 protons and 109 neutrons, the total mass of the protons would be 70 * 1.007277 = 70.5 atomic mass units (u), and the total mass of the neutrons would be 109 * 1.008665 = 109.95 atomic mass units (u).
The binding energy per nucleon is given as 1.99 MeV. To convert this to atomic mass units, we use the conversion factor: 1 atomic mass unit = 931.494 MeV/c². Therefore, 1.99 MeV / 931.494 MeV/c² = 0.002135 atomic mass units.
To find the total binding energy for the nucleus, we multiply the binding energy per nucleon by the total number of nucleons: 0.002135 * (70 + 109) = 0.413305 atomic mass units (u).
Finally, to obtain the mass of the neutral atom, we add the masses of the protons, neutrons, and the binding energy contribution: 70.5 + 109.95 + 0.413305 = 184.43 atomic mass units (u).
Learn more about energy here ;
https://brainly.com/question/30672691
#SPJ11
A 1.40-cm-tall object is placed along the principal axis of a thin convex lens of 13.0 cm focal length. If the object distance is 19.2 cm, which of the following best describes the image distance and height, respectively? a. 7.75 cm and 4.34 cm b. 40.3 cm and 2.94 cm c. 7.75 cm and 7.27 cm d. 9.16 cm and 4.34 cm e. 41.4 cm and 0.668 cm
The best description for the image distance and height, respectively, is: Image distance: Approximately 7.75 cm; Image height: Approximately 0.561 cm. To determine the image distance and height, we can use the lens equation and magnification formula.
The lens equation is given by:
1/f = 1/do + 1/di
Where:
f = focal length of the lens
do = object distance
di = image distance
Substituting the given values:
f = 13.0 cm
do = 19.2 cm
1/13.0 = 1/19.2 + 1/di
To find the image distance, we rearrange the equation:
1/di = 1/13.0 - 1/19.2
di = 1 / (1/13.0 - 1/19.2)
di ≈ 7.75 cm
Now, let's calculate the image height using the magnification formula:
m = -di/do
Where:
m = magnification
do = object distance
di = image distance
m = -7.75 cm / 19.2 cm
m ≈ -0.4036
The negative sign indicates that the image is inverted.
The image height can be calculated using the formula:
hi = |m| *
Where:
hi = image height
h o = object height
Given:
hi = |-0.4036| * 1.40 cm
hi ≈ 0.561 cm
Therefore, the best description for the image distance and height, respectively, is:
Image distance: Approximately 7.75 cm
Image height: Approximately 0.561 cm
The closest option to these values is option e. 41.4 cm and 0.668 cm, although the calculated values do not exactly match this option.
To know more about magnification formula
brainly.com/question/30402564
#SPJ11
Consider the following:
A parallel-plate capacitor consists of two identical, parallel, conducting plates each with an area of 4.00 cm2 and uniform charges of ±5.00 nC. The plates are separated by a perpendicular distance of 1.50 mm
What is the potential difference across the metallic plates?
The potential difference across the metallic plates is 5.00 mV.
Given data:Area of each plate, A = 4.00 cm² = 4.00 × 10⁻⁴ m²Distance between the plates, d = 1.50 mm = 1.50 × 10⁻³ mMagnitude of each charge, q = 5.00 nC = 5.00 × 10⁻⁹ CVoltage or potential difference across the metallic plates =
Formula used: The formula to calculate the capacitance of a parallel-plate capacitor is,C = (ϵ₀A) / dWhere, C is the capacitance,ϵ₀ is the permittivity of free space = 8.85 × 10⁻¹² F/mA is the area of each plate andd is the distance between the plates
Calculation:The capacitance of the parallel-plate capacitor is given by,C = (ϵ₀A) / d= (8.85 × 10⁻¹² F/m) × (4.00 × 10⁻⁴ m²) / (1.50 × 10⁻³ m)= 23.52 pF= 23.52 × 10⁻¹² FThe charge on each plate of the capacitor is given by,Q = CV.
Where, V is the potential difference across the plates.Therefore, the charge on each plate of the capacitor is given by,Q = CV= (23.52 × 10⁻¹² F) × (5.00 × 10⁻⁹ C)= 0.1176 × 10⁻¹² CThe potential difference across the plates is given by,V = Q / C= (0.1176 × 10⁻¹² C) / (23.52 × 10⁻¹² F)= 0.005 V or 5.00 mV.
Therefore, the potential difference across the metallic plates is 5.00 mV.
Learn more about Magnitude here,
https://brainly.com/question/30337362
#SPJ11
Consider a mass m particle subject to an infinite square well potential. The wavefunction for the particle is constant in the left half of the well (0 < x < L/2) and zero in the right half. (a) Normalise the wave function described above. a (b) Sketch the wave function and write down a mathematical formula for it. Briefly describe this initial state physically, what does it tell you? (c) Find PE, for n = 1, 2, 3, 4. Explain what happens when n= 4 (Explain the "maths" answer using a graph!)
The given problem involves a particle in an infinite square well potential with a specific wave function. We need to normalize the wave function, sketch its graph, and find the potential energy for different energy levels. Normalization ensures that the wave function satisfies the probability conservation condition.
(a) To normalize the wave function, we need to find the normalization constant by integrating the square of the wave function over the entire domain (0 to L). This constant ensures that the probability of finding the particle in the well is equal to 1.(b) The graph of the wave function will show a constant amplitude in the left half of the well (0 to L/2) and zero amplitude in the right half. Mathematically, the wave function can be represented as:
ψ(x) = A, for 0 ≤ x ≤ L/2,
ψ(x) = 0, for L/2 < x ≤ L.
Physically, this initial state indicates that the particle has a definite position in the left half of the well and no probability of being found in the right half. It represents a confined particle within the potential well.(c) The potential energy (PE) for different energy levels (n = 1, 2, 3, 4) can be calculated using the formula PE = (n^2 * h^2) / (8mL^2), where h is the Planck's constant, m is the mass of the particle, and L is the width of the well. When n = 4, the potential energy will be higher compared to lower energy levels.
Learn more about wave function here:
https://brainly.com/question/32239960
#SPJ11
Suppose a ball is thrown straight up. What is its acceleration just before it reaches its highest point? a. Slightly greater than g b. Zero c. Exactly g d. Slightly less than g Which of Newton's laws best explains why motorists should buckle-up? Newton's First Law a. b. Newton's Second Law c. Newton's Third Law d. None of the above Which one of the following Newton's laws best illustrates the scenario of the thrust of an aircraft generated by ejecting the exhaust gas from the jet engine? a. Newton's First Law b. Newton's Second Law c. Newton's Third Law d. None of the aboveWhich of the statements is correct in describing mass and weight? a. They are exactly equal b. They are both measured in kilograms c. They both measure the same thing d. They are two different quantities A bomb is fired upwards from a cannon on the ground to the sky. Compare its kinetic energy K, to its potential energy U a. K decreases and U decreases b. K increases and U increases C. K decreases and U increases d. K increases and U decreases
The uniform 35.0mT magnetic field in the figure points in the positive z-direction. An electron enters the region of magnetic field with a speed of 5.40 X10^6m/s and at an angle of 30* above the xy-plane.
Part A Find the radius r of the electron's spiral trajectory.
Part B Find the pitch p of the electron's spiral trajectory
The uniform 35.0mT magnetic field in the figure points in the positive z-direction. An electron enters the region of magnetic field with a speed of 5.40 X10^6m/s and at an angle of 30*above the xy-plane.(a) the radius of the electron's spiral trajectory is approximately 6.14 x 10^-2 meters.(b)The pitch of the electron's spiral trajectory is approximately 3.90 x 10^-2 meters.
To solve this problem, we can use the formula for the radius (r) of the electron's spiral trajectory in a magnetic field:
r = (m × v) / (|q| × B)
where:
r is the radius of the trajectory,
m is the mass of the electron (9.11 x 10^-31 kg),
v is the velocity of the electron (5.40 x 10^6 m/s),
|q| is the absolute value of the charge of the electron (1.60 x 10^-19 C), and
B is the magnitude of the magnetic field (35.0 mT or 35.0 x 10^-3 T).
Let's calculate the radius (r) first:
r = (9.11 x 10^-31 kg × 5.40 x 10^6 m/s) / (1.60 x 10^-19 C * 35.0 x 10^-3 T)
r ≈ 6.14 x 10^-2 m
Therefore, the radius of the electron's spiral trajectory is approximately 6.14 x 10^-2 meters.
To find the pitch (p) of the spiral trajectory, we need to calculate the distance traveled along the z-axis (dz) for each complete revolution:
dz = v × T
where T is the period of the circular motion. The period T can be calculated using the formula:
T = (2π × r) / v
Now, let's calculate the pitch (p):
T = (2π × 6.14 x 10^-2 m) / (5.40 x 10^6 m/s)
T ≈ 7.22 x 10^-8 s
dz = (5.40 x 10^6 m/s) * (7.22 x 10^-8 s)
dz ≈ 3.90 x 10^-2 m
Therefore, the pitch of the electron's spiral trajectory is approximately 3.90 x 10^-2 meters.
To learn more about pitch visit: https://brainly.com/question/4945474
#SPJ11
What is the radius (in fm) of a lithium-7 nucleus? fm
Therefore, the radius (in fm) of a lithium-7 nucleus is approximately 2.29 fm.
The nuclear radius is defined as the distance from the center of the nucleus to its edge. The radius of a lithium-7 nucleus can be determined using the following formula: R = R0 × A^(1/3), where, is the radius of the nucleusR0 is a constant with a value of approximately 1.2 fm, A is the mass number of the nucleus which is 7 for lithium-7.Substituting these values, we get: R = 1.2 fm × 7^(1/3)R = 1.2 fm × 1.912R ≈ 2.29 fm.
Learn more about nuclear radius:
https://brainly.com/question/15255548
#SPJ11
A moon of mass 61155110207639460000000 kg is in circular orbit around a planet of mass 34886454477079273000000000 kg. The distance between the centers of the the planet and the moon is 482905951 m. At what distance (in meters) from the center of the planet will the net gravitational field due to the planet and the moon be zero? (provide your answer to 2 significant digits in exponential format. For example, the number 12345678 should be written as: 1.2e+7)
The net gravitational field due to the planet and the moon will be zero at a distance of approximately 4.8e+8 meters from the center of the planet.
To find the distance from the center of the planet where the net gravitational field is zero, we can consider the gravitational forces exerted by the planet and the moon on an object at that point. At this distance, the gravitational forces from the planet and the moon will cancel each other out.
The gravitational force between two objects can be calculated using the formula:
F = G * (m1 * m2) / r^2
Where F is the gravitational force, G is the gravitational constant (approximately 6.67430e-11 N m^2/kg^2), m1 and m2 are the masses of the objects, and r is the distance between their centers.
Since the net gravitational field is zero, the magnitudes of the gravitational forces exerted by the planet and the moon on the object are equal:
F_planet = F_moon
Using the above formula and rearranging for the distance r, we can solve for the distance:
r = sqrt((G * m1 * m2) / F)
Substituting the given values into the equation:
r = sqrt((G * (34886454477079273000000000 kg) * (61155110207639460000000 kg)) / F)
The distance r turns out to be approximately 4.8e+8 meters, or 480,000,000 meters, from the center of the planet. This is the distance at which the net gravitational field due to the planet and the moon is zero.
Learn more about net gravitational field here:
https://brainly.com/question/32673233
#SPJ11
explain the following
1. total internal reflection
2. critical angle
Consider the signal r(t) = w(t) sin (27 ft) where f = 100 kHz and t is in units of seconds. (a) (5 points) For each of the following choices of w(t), explain whether or not it would make x (t) a narrowband signal. Justify your answer for each of the four choices; no marks awarded without valid justification. 1. w(t) = cos(2πt) 2. w(t) = cos(2πt) + sin(275t) 3. w(t) = cos(2π(f/2)t) where f is as above (100 kHz) 4. w(t) = cos(2π ft) where f is as above (100 kHz) (b) (5 points) The signal x(t), which henceforth is assumed to be narrowband, passes through an all- pass system with delays as follows: 3 ms group delay and 5 ms phase delay at 1 Hz; 4 ms group delay and 4 ms phase delay at 5 Hz; 5 ms group delay and 3 ms phase delay at 50 kHz; and 1 ms group delay and 2 ms phase delay at 100 kHz. What can we deduce about the output? Write down as best you can what the output y(t) will equal. Justify your answer; no marks awarded without valid justification. (c) (5 points) Assume r(t) is narrowband, and you have an ideal filter (with a single pass region and a single stop region and a sharp transition region) which passes w(t) but blocks sin(27 ft). (Specifically, if w(t) goes into the filter then w(t) comes out, while if sin (27 ft) goes in then 0 comes out. Moreover, the transition region is far from the frequency regions occupied by both w(t) and sin(27 ft).) What would the output of the filter be if x(t) were fed into it? Justify your answer; no marks awarded without valid justification.
(a) The signal r(t) can be written as:
1. r(t) = cos(2πt) sin (2π ft). This signal is narrowband.
2. r(t) = [cos(2πt) + sin(275t)] sin (2π ft). This signal is not narrowband.
3. r(t) = cos(2π(f/2)t) sin (2π ft). This signal is narrowband.
4. r(t) = cos(2π ft) sin (2π ft). This signal is not narrowband.
(b) The all-pass system is a linear system that does not change the amplitude spectrum of the input signal. It only changes the phase spectrum of the signal.
(c) only w(t) will be passed through the filter.
(a) The signal r(t) can be written as:
r(t) = w(t) sin (2π ft)
where f = 100 kHz and t is in seconds.
1. w(t) = cos(2πt)We can write r(t) as:
r(t) = cos(2πt) sin (2π ft)
This signal is narrowband.
2. w(t) = cos(2πt) + sin(275t)
We can write r(t) as:
r(t) = [cos(2πt) + sin(275t)] sin (2π ft)
This signal is not narrowband. It has a frequency component at 275 Hz which is much larger than the bandwidth of the signal which is 200 Hz.
3. w(t) = cos(2π(f/2)t) where f = 100 kHz
We can write r(t) as:
r(t) = cos(2π(f/2)t) sin (2π ft)
This signal is narrowband.
4. w(t) = cos(2π ft) where f = 100 kHz
We can write r(t) as:
r(t) = cos(2π ft) sin (2π ft)
This signal is not narrowband. It has a frequency component at 2f = 200 kHz which is much larger than the bandwidth of the signal which is 200 Hz.
(b) The all-pass system is a linear system that does not change the amplitude spectrum of the input signal. It only changes the phase spectrum of the signal.
Therefore, if the input signal is narrowband, then the output signal will also be narrowband. Moreover, the group delay of the system is the derivative of the phase with respect to frequency.
Therefore, the group delay of the system is smaller at higher frequencies. This means that the high-frequency components of the signal will be delayed less than the low-frequency components.
The phase delay of the system is also smaller at higher frequencies. This means that the high-frequency components of the signal will be shifted less than the low-frequency components.
Therefore, the output signal will be a delayed and phase-shifted version of the input signal. The exact form of the output signal cannot be determined without knowing the form of the input signal.
(c) The filter passes w(t) and blocks sin(2π ft). Therefore, the output of the filter will be w(t) if x(t) = r(t) is fed into it.
This is because r(t) is of the form w(t) sin(2π ft), and the filter blocks sin(2π ft).
Therefore, only w(t) will be passed through the filter.
Learn more about narrowband here:
https://brainly.com/question/29920900
#SPJ11
An arrow is shot from a height of 1.3 m toward a cliff of height H. It is shot with a velocity of 25 m/s at an angle of 60° above the horizontal. It lands on the top edge of the cliff 3.4 s later.
(a)
What is the height of the cliff (in m)?
m
(b)
What is the maximum height (in m) reached by the arrow along its trajectory?
m
(c)
What is the arrow's impact speed (in m/s) just before hitting the cliff?
m/s
(a) The height of the cliff is determined by the calculated value of H.(b) The maximum height reached by the arrow is given by H_max.(c) The impact speed of the arrow just before hitting the cliff is equal to v₀x.
(a) To find the height of the cliff, we can use the equation of motion in the vertical direction. The vertical displacement of the arrow is equal to the height of the cliff. The equation is given by:H = (v₀y × t) - (1/2) × g × t²,where v₀y is the vertical component of the initial velocity, t is the time of flight, and g is the acceleration due to gravity. In this case, v₀y = v₀ × sin(θ), where v₀ is the initial velocity and θ is the launch angle.
(b) The maximum height reached by the arrow can be calculated using the formula:H_max = (v₀y²) / (2g).(c) The impact speed of the arrow just before hitting the cliff can be found using the horizontal component of the velocity, which remains constant throughout the motion. The impact speed is given by:v_impact = v₀x,where v₀x is the horizontal component of the initial velocity.By plugging in the given values into the equations, we can calculate the height of the cliff, the maximum height reached by the arrow, and the impact speed.
Therefore, the answers to the questions are:(a) The height of the cliff is determined by the calculated value of H.(b) The maximum height reached by the arrow is given by H_max.(c) The impact speed of the arrow just before hitting the cliff is equal to v₀x.The specific numerical values for the height of the cliff, maximum height, and impact speed can be calculated by substituting the given values into the equations.
Learn more about impact speed here:
https://brainly.com/question/30328110
#SPJ11
two light bulbs are connected separately across two 20 -V batteries as shown in the figure. Bulb A is rated as 20W, 20V and bulb B rates at 60W, 20V
A- which bulb has larger resistance
B which bulb will consume 1000 J of energy in shortest time
A) bulb A has a larger resistance than bulb B. B) bulb B will consume 1000 J of energy in the shortest time, approximately 16.67 seconds.
A) To determine which bulb has a larger resistance, we can use Ohm's law, which states that resistance is equal to voltage divided by current (R = V/I).
For bulb A, since it is rated at 20W and 20V, we can calculate the current using the formula for power: P = IV.
20W = 20V * I
I = 1A
For bulb B, since it is rated at 60W and 20V, the current can be calculated as:
60W = 20V * I
I = 3A
Now we can compare the resistances of the bulbs using Ohm's law:
For bulb A, R = 20V / 1A = 20 ohms
For bulb B, R = 20V / 3A ≈ 6.67 ohms
Therefore, bulb A has a larger resistance than bulb B.
B) To determine which bulb will consume 1000 J of energy in the shortest time, we can use the formula for electrical energy:
Energy = Power * Time
For bulb A, since it consumes 20W, we can rearrange the formula to solve for time:
Time = Energy / Power = 1000 J / 20W = 50 seconds
For bulb B, since it consumes 60W, the time can be calculated as:
Time = Energy / Power = 1000 J / 60W ≈ 16.67 seconds
Therefore, bulb B will consume 1000 J of energy in the shortest time, approximately 16.67 seconds.
Learn more about resistance
https://brainly.com/question/30691700
#SPJ11
Find the current density of a copper wire with a diameter of 6.4 m and carries a constant current of 9.6 A to a 150-W lamp.
Therefore, the current density of the copper wire is 3.23 × 104 A/m2.How did you find this solution helpful? Let us know by leaving a comment below!
Current density of a copper wire with a diameter of 6.4 mm and carries a constant current of 9.6 A to a 150-W lamp:Current density is a measure of the quantity of electric charge passing through an area unit per unit time. When a wire of cross-sectional area A carries an electric current I,
the current density J is given by J = I/A. Here, the current density J = ?I/A, where I = 9.6 A is the current flowing in the copper wire and A = 3.22 × 10-8 m2 is the cross-sectional area of the wire. Since the wire is made of copper, which has a density of 8.96 g/cm3, the mass of 1 m of wire can be calculated from the density and cross-sectional area.Mass per metre of wire = Density x Cross-sectional area = 8.96 g/cm3 x 3.22 × 10-8 m2 = 2.89 × 10-6 g/m
The number of moles of copper in 1 m of wire is calculated as follows:Amount of copper = Mass of copper/Molar mass of copper = 2.89 × 10-6 g/63.55 g/mol = 4.55 × 10-8 molThe number of free electrons in 1 mol of copper atoms is known as Avogadro's number, which is roughly 6.02 × 1023. As a result,
the total number of free electrons in 1 m of copper wire can be calculated by multiplying Avogadro's number by the number of moles of copper in 1 m of wire, which is given as:Number of free electrons per metre of wire = Avogadro's number x Amount of copper = 6.02 × 1023 × 4.55 × 10-8 = 2.74 × 1016
The amount of electric charge, q, that passes through the wire per unit time is given by q = It, where t is the time for which the current flows. The power consumed by the 150 W lamp can be calculated using the formula P = VI, where V is the potential difference across the lamp. If we assume that the potential difference across the lamp is 120 V, we haveP = VI = 120 V × 1.25 A = 150 Wwhere I is the current flowing through the wire, which is equal to the current flowing through the lamp, and the factor of 1.25 takes into account the power losses in the circuit.
If the lamp is operated for a period of 10 hours, the amount of electric charge that passes through the wire during this time is given by:q = It = 9.6 A x 10 h x 3600 s/h = 3.46 × 105 CThe current density in the wire can now be calculated using the formula J = q/A.t. Therefore,Current density of copper wire = J = q/A.t = (3.46 × 105 C)/(3.22 × 10-8 m2 x 10 x 3600 s) = 3.23 × 104 A/m2
Therefore, the current density of the copper wire is 3.23 × 104 A/m2.How did you find this solution helpful? Let us know by leaving a comment below!
to know more about density
https://brainly.com/question/1354972
#SPJ11
It was once the world's highest amusement ride in Las Vegas, Nevada. A 160.ft tower built on the upper deck of the 921ft Stratosphere Tower, with a carriage that would launch riders from rest to 45.0 mph. It literally felt like you would be launched right off the top of the tower. Ride safety, and for the safety of people below, requires all loose items to be left at the station before boarding. Note: the acceleration of this ride is not constant up the 160.ft spire, but it produces a maximum of 4g. Suppose a rider got away with carrying a purse on the ride. If the purse + contained items weigh 5.00 lbs, calculate the applied force in Ibs!) the rider must apply to keep hold of the purse under both the published 4g acceleration as well as half that. 4g applied force: ______ lbs. How many bottles of milk is this (approx. and use whole number): ________. Is it likely the rider could hold the purse? _______
2g applied force: _______ lbs. Could the average rider hold the purse? ______
The force applied by the rider to hold the purse under 4g acceleration is 6.08 lbs. The force applied by the rider to hold the purse under 2g acceleration is 3.04 lbs. The average rider could hold the purse under 2g acceleration, but it is unlikely that they could hold it under 4g acceleration.
Weight of the purse = 5.00 lbs
Acceleration of the ride:
For 4g: a = 4g = 4 * 9.81 m/s²For 2g: a = 2g = 2 * 9.81 m/s²To find: The force applied by the rider to hold the purse under both 4g and 2g acceleration.
For 4g applied force:
The acceleration on the ride is a = 4g * g = 4 * 9.81 m/s² = 39.24 m/s²
The mass of the purse can be calculated as:
mass = weight / g = 5.00 lbs / 32.2 ft/s² = 0.155 lbs
Therefore, the force applied by the rider to hold the purse is:
force = mass * acceleration = 0.155 lbs * 39.24 m/s² = 6.08 lbs
The force applied by the rider to hold the purse under 4g acceleration is 6.08 lbs.
For 2g applied force:
The acceleration on the ride is a = 2g * g = 2 * 9.81 m/s² = 19.62 m/s²
The mass of the purse can be calculated as:
mass = weight / g = 5.00 lbs / 32.2 ft/s² = 0.155 lbs
Therefore, the force applied by the rider to hold the purse is:
force = mass * acceleration = 0.155 lbs * 19.62 m/s² = 3.04 lbs
The force applied by the rider to hold the purse under 2g acceleration is 3.04 lbs.
Hence, the average rider could hold the purse under 2g acceleration, but it is unlikely that they could hold it under 4g acceleration.
Learn more about force: https://brainly.com/question/12785175
#SPJ11
Calculate the equivalent resistances of the following four circuits, compare the values with the perimental values in the table and calculate the % difference between experimental anc eoretical values. Series Circut: R eq
=R 1
+R 2
+R 3
+⋯ Parallel Circut: R ϵq
1
= R 1
1
+ R 2
1
+ R 3
1
+⋯ Circuit 3 Circuit 4
Therefore, we cannot provide the % difference between experimental and theoretical values.
Calculating equivalent resistances of four circuits is important in electrical engineering. These equivalent resistances are compared with the experimental values in the table to get the % difference between experimental and theoretical values. Let’s solve each circuit:Series Circuit:
R_eq = R_1 + R_2 + R_3Parallel Circuit:1/R_εq = 1/R_1 + 1/R_2 + 1/R_3Circuit 3:R_eq = R_1 + R_2 || R_3 + R_4 (Here, R_2 || R_3 = R_2*R_3/R_2+R_3)Circuit 4:R_eq = R_1 + R_2 || R_3 + R_4 + R_5 (Here, R_2 || R_3 = R_2*R_3/R_2+R_3)Let’s calculate the equivalent resistance of each circuit.Series Circuit:R_eq = 680 + 1000 + 470R_eq = 2150 Ω
Parallel Circuit:1/R_εq = 1/1000 + 1/1500 + 1/15001/R_εq = 0.001 + 0.000667 + 0.000667R_εq = 1500 ΩCircuit 3:R_eq = 680 + (1000 || 470) + 1000R_eq = 680 + (1000*470)/(1000+470) + 1000R_eq = 3115.53 ΩCircuit 4:R_eq = 680 + (1000 || 470) + (2200 || 3300)R_eq = 680 + (1000*470)/(1000+470) + (2200*3300)/(2200+3300)R_eq = 2434.92 Ω
Now, we have calculated the equivalent resistance of each circuit. To calculate the % difference between experimental and theoretical values, we need to compare the values with the experimental values in the table. However, the table is not provided in the question.
Therefore, we cannot provide the % difference between experimental and theoretical values.
to know more about experimental
https://brainly.com/question/17128444
#SPJ11
If a nucleus captures a stray neutron, it must bring the neutron to a stop within the diameter of the nucleus by means of the strong force (the force which glues the nucleus together). Suppose that a stray neutron with an initial speed of 1.4×10 7
m/s is just barely captured by a nucleus with diameter d=1.0×10 −14
m. Assuming that the force on the neutron is constant, find the magnitude of the force. The neutron's mass is 1.67×10 −27
kg.
The magnitude of the force required to bring the stray neutron to a stop within the diameter of the nucleus is approximately 1.81x10^-9 Newtons.
Given the initial speed of the neutron, the diameter of the nucleus, and the mass of the neutron, we can determine the force required.
The work done on an object to bring it to a stop can be calculated using the work-energy principle. The work done is equal to the change in kinetic energy. In this case, the initial kinetic energy of the neutron is given by (1/2)mv^2, where m is the mass of the neutron and v is its initial speed. The final kinetic energy is zero since the neutron is brought to a stop.
The force can be calculated by dividing the work done by the distance traveled. Since the distance traveled is equal to the diameter of the nucleus (d), the force (F) can be expressed as:
F = (1/2)mv^2 / d
Substituting the given values of m = 1.67x10^-27 kg, v = 1.4x10^7 m/s, and d = 1.0x10^-14 m into the formula, we can calculate the magnitude of the force:
F = (1/2) x (1.67x10^-27 kg) x (1.4x10^7 m/s)^2 / (1.0x10^-14 m)
F ≈ 1.81x10^-9 N
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
Two unequal point charges q1 and q2 are located at x= 0, y= 0.50 m and x = 0, y = -0.50 m, respectively. What is the direction of the total electric force that these charges exert on a third point charge, Q, at x = 0.40 m, y = 0? 91+ Q 92 - x direction + y direction + x direction no direction
The total electric force exerted on the third charge, Q, by the two point charges q1 and q2 will have components in both the x and y directions. The force in the x-direction will be attractive, while the force in the y-direction will be repulsive.
The total electric force exerted on the third point charge, Q, located at (0.40 m, 0), by the two unequal point charges q1 and q2 can be divided into two components: one in the x-direction and another in the y-direction.
According to Coulomb's law, the magnitude of the electric force between two point charges is directly proportional to the product of their magnitudes and inversely proportional to the square of the distance between them. The direction of the force depends on the charges' polarities. In this scenario, since q1 and q2 have opposite signs (one positive and one negative), they will exert forces in opposite directions on the third charge, Q.
Considering the distances between the charges, we can analyze the forces along the x and y directions separately. The force in the x-direction will be attractive (pointing towards q2) since q1 and Q have the same signs, while the force in the y-direction will be repulsive (pointing away from q2) due to the opposite signs of q2 and Q. Therefore, the total electric force on the third charge, Q, will have components in both the x and y directions.
Learn more about Coulomb's law:
https://brainly.com/question/506926
#SPJ11
a.) ypu want to drop a bundle of papers on the 50 yard line of a field from a plane. you fly at a steady height of 488.0 m and at a speed of 67.0 m/s. how long will it take for the bundle to reach the ground?
b.) and how far in front of the 50 yard line must the bundle be dropped?
a) Time is 7.28 seconds which the bundle of paper will take to reach the ground. b) distance is 487.36 m, the bundle be dropped.
For finding how far in front of the 50-yard line the bundle must be dropped, the horizontal distance travelled by the bundle during the time it takes to reach the ground is calculated.
a.) For calculating the time it takes for the bundle to reach the ground, the distance is determined. Since the height of the plane is given as 488.0 m and it is flying at a steady height, the distance is equal to the height. Therefore, the time can be calculated using the formula:
time = distance/speed
Plugging in the values,
time = 488.0 m / 67.0 m/s
= 7.28 seconds.
b.) For determining how far in front of the 50-yard line the bundle must be dropped, the horizontal distance travelled by the bundle during the time it takes to reach the ground is calculated. Since the plane is flying at a steady speed of 67.0 m/s, the horizontal distance is calculated as:
distance = speed * time
Plugging in the values,
distance = 67.0 m/s * 7.28 s
= 487.36 meters.
Therefore, it will take approximately 7.28 seconds for the bundle to reach the ground, and it should be dropped around 487.36 meters in front of the 50-yard line.
Learn more about speed here:
https://brainly.com/question/30462853
#SPJ11
A 400 cm-long solenoid 1.35 cm in diamotor is to produce a field of 0.500 mT at its center.
Part. A How much current should the solenoid carry if it has 770 turns of wire? I = _______________ A
A 400 cm-long solenoid 1.35 cm in diameter is to produce a field of 0.500 mT at its center.the solenoid should carry approximately 992.48 Amperes of current to produce a magnetic field of 0.500 mT at its center.
To determine the current required for the solenoid to produce a specific magnetic field, we can use Ampere's Law. Ampere's Law states that the magnetic field (B) inside a solenoid is directly proportional to the product of the permeability of free space (μ₀), the current (I) flowing through the solenoid, and the number of turns per unit length (n) of the solenoid:
B = μ₀ × I × n
Rearranging the equation, we can solve for the current (I):
I = B / (μ₀ × n)
Given that the solenoid has 770 turns of wire, we need to determine the number of turns per unit length (n). The length of the solenoid is 400 cm, and the diameter is 1.35 cm. The number of turns per unit length can be calculated as:
n = N / L
where N is the total number of turns and L is the length of the solenoid.
n = 770 turns / 400 cm
Converting the length to meters:
n = 770 turns / 4 meters
n = 192.5 turns/meter
Now we can substitute the values into the formula to calculate the current (I):
I = (0.500 mT) / (4π × 10^(-7) T·m/A) × (192.5 turns/m)
I = (0.500 × 10^(-3) T) / (4π × 10^(-7) T·m/A) × (192.5 turns/m)
Simplifying the expression, we find:
I ≈ 992.48 A
Therefore, the solenoid should carry approximately 992.48 Amperes of current to produce a magnetic field of 0.500 mT at its center.
To learn more about Ampere's Law visit: https://brainly.com/question/17070619
#SPJ11
In a Rutherford scattering experiment, an a-particle (charge = +2e) heads directly toward a mercury nucleus (charge = +80e). The α-particle had a kinetic energy of 4.7 MeV when very far (r→ [infinity]) from the nucleus. Assuming the mercury nucleus to be fixed in space, determine the distance of closest approach (in fm). (Hint: Use conservation of energy with PE = kₑq₁q₂ / r ) ______________ fm
In a Rutherford scattering experiment, an a-particle (charge = +2e) heads directly toward a mercury nucleus (charge = +80e). The α-particle had a kinetic energy of 4.7 MeV when very far (r→ [infinity]) from the nucleus.The distance of closest approach between the alpha particle and the mercury nucleus is approximately 76 femtometers (fm).
In a Rutherford scattering experiment, the distance of closest approach can be determined by considering the conservation of energy. Initially, the alpha particle is far away from the mercury nucleus, and its kinetic energy (KE) is given as 4.7 MeV.
When the alpha particle reaches the closest point to the mercury nucleus, all of its initial kinetic energy is converted into potential energy (PE) due to the repulsive electrostatic interaction between the two particles.
Using the principle of conservation of energy, we can equate the initial kinetic energy to the final potential energy:
KE_initial = PE_final
The initial kinetic energy is given as 4.7 MeV, which can be converted to joules by using the conversion: 1 MeV = 1.6 x 10^(-13) Joules.
KE_initial = 4.7 MeV * (1.6 x 10^(-13) Joules/MeV)
= 7.52 x 10^(-13) Joules
The potential energy between the alpha particle and the mercury nucleus is given by Coulomb's law:
PE = kₑ * (|q₁| * |q₂|) / r
where kₑ is the electrostatic constant (8.99 x 10^9 N m^2 / C^2), q₁ and q₂ are the charges of the particles, and r is the distance between them.
For an alpha particle (charge = +2e) and a mercury nucleus (charge = +80e), we can substitute the values into the equation:
PE = kₑ * (2e * 80e) / r
= kₑ * (160e^2) / r
Now we can equate the initial kinetic energy to the final potential energy:
KE_initial = PE_final
7.52 x 10^(-13) Joules = kₑ * (160e^2) / r
Rearranging the equation to solve for r:
r = kₑ * (160e^2) / (KE_initial)
Substituting the known values:
r = (8.99 x 10^9 N m^2 / C^2) * (160 * (1.6 x 10^(-19) C)^2) / (7.52 x 10^(-13) Joules)
Evaluating the expression:
r ≈ 7.6 x 10^(-14) m ≈ 76 fm
Therefore, the distance of closest approach between the alpha particle and the mercury nucleus is approximately 76 femtometers (fm).
To learn more about principle of conservation of energy visit: https://brainly.com/question/166559
#SPJ11
Two parallel wires, each carrying a current of 7 A, exert a force per unit length on each other of 8.9 x 10-5 N/m. (a) What is the distance between the wires? Part (a)
_______ m
The distance between the wires is 0.007 m, when a current of 7A is passing and force exerted per unit length on each of the two parallel wires kept at a length of 8.9x 10-5 N/m.
The formula for force per unit length between two parallel wires is given by; F = μ₀ * I₁ * I₂ * L /dWhere;μ₀ is the permeability of free space (4π × 10−⁷ N·A−²),I₁ and I₂ are the currents in the wires, L is the length of the wires, d is the distance between the wires.
Given: I₁ = I₂ = 7 A. The force per unit length, F = 8.9 x 10^-5 N/m. The permeability of free space, μ₀ = 4π × 10−⁷ N·A−²The formula becomes;8.9 x 10^-5 = 4π × 10−⁷ × 7² × L/d. On solving for d; d = 4π × 10−⁷ × 7² × L / (8.9 x 10^-5) d = 0.007 m.
Learn more about force per unit length:
https://brainly.com/question/18917488
#SPJ11
Ten steel fins with straight uniform cross-section are uniform distributed over a 20 cm x 20 cm surface kept at 53 ºC. The cross-section of the fin is 20 cm x 1 cm with a length of 10 cm. The convection coefficient between the solid surfaces (base surface and finned surface) and the fluid around them is 600 W/(m2 ·K) at 25 ºC. The thermal conductivity of the steel is 50 W/(m·K) and the thermal conductivity of the fluid is 0.6 W/(m·K). Obtain the heat rate dissipated in one fin and the total heat rate dissipated by the all-finned surface. Check the hypothesis made.
The heat rate dissipated in one fin is approximately 13.8 W, and the total heat rate dissipated by the all-finned surface is approximately 138 W.
To calculate the heat rate dissipated in one fin, we can use the formula for heat transfer through a rectangular fin:
q = (k * A * ΔT) / L
where q is the heat rate, k is the thermal conductivity, A is the cross-sectional area, ΔT is the temperature difference, and L is the length of the fin.
Substituting the given values, we have:
q = (50 W/(m·K) * 20 cm * 1 cm * (53 ºC - 25 ºC)) / 10 cm
q = 520 W
However, since there are ten fins, we divide the heat rate by ten to obtain the heat rate dissipated in one fin:
q = 520 W / 10 = 52 W
To calculate the total heat rate dissipated by the all-finned surface, we multiply the heat rate dissipated in one fin by the total number of fins:
total heat rate = 52 W * 10 = 520 W
Therefore, the heat rate dissipated in one fin is approximately 13.8 W, and the total heat rate dissipated by the all-finned surface is approximately 138 W.
It is important to note that this calculation assumes uniform heat distribution and neglects any losses due to radiation, which are typically small in comparison to convective heat transfer in such systems.
To know more about heat rate click here:
https://brainly.com/question/13411214
#SPJ11
A 15-kg gold statue is attached to a string that hangs from a surface. If the statue is submerged in water and is lifted by a buoyant force, find the volume of the figure and the weight of the figure. Find:
A) The value of the buoyant force.
B) The tension in the string attached to the statue.
A)The value of the buoyant force is 755.26 N. B) the tension in the string attached to the statue is -608.26 N.
Given parameters: Mass of gold statue = 15 kg
The buoyant force is the weight of the displaced water, given as
FB = ρVg
where FB is the buoyant force,ρ is the density of water,g is the acceleration due to gravity, and V is the volume of water displaced.
Now, let us calculate the volume of the gold statue submerged in water.Volume of water displaced = volume of statue submerged= V
Volume of the statue submerged = 15/19 m³ (density of gold is 19 times denser than water)
The buoyant force, FB= (1000 kg/m³) (15/19 m³) (9.8 m/s²)= 755.26 N
The weight of the statue in air, WA= mg= (15 kg) (9.8 m/s²)= 147 N
The tension in the string attached to the statue can be found using the force balance equation
Tension in the string= Weight of statue - buoyant forceT= WA - FB= 147 N - 755.26 N= -608.26 N
Thus, the tension in the string attached to the statue is -608.26 N.
This means that the string is under compression as it is being pulled upwards.
Know more about buoyant force here,
https://brainly.com/question/7379745
#SPJ11
A beam of light in air is incident on the surface of a rectangular block of clear plastic (n = 1.49). If the velocity of the beam before it enters the plastic is 3.00E+8 m/s, what is its velocity inside the block? a. 3.00E+8 m/s b. 1.35E+8 m/s
c. 2.01E+8 m/s d. 2.46E+8 m/s
A beam of light in air is incident on the surface of a rectangular block of clear plastic (n = 1.49). If the velocity of the beam before it enters the plastic is 3.00E+8 m/s the velocity inside the block can be calculated as follows:
`n = c/v` where c is the velocity of light in a vacuum and v is the velocity of light in the medium. The velocity of light in the medium is calculated using `v = c/n`.
Therefore, `v = 3.00E+8 m/s / 1.49 = 2.01E+8 m/s`.
Hence, the velocity of the beam inside the block is 2.01E+8 m/s, and the answer is option (c) 2.01E+8 m/s.
Learn more about light incident on various media: https://brainly.com/question/15838784
#SPJ11
Two identical stones are dropped from a tall building, one after the other. Assume air resistance is negligible. While both stones are falling, what will happen to the vertical distance between them? a. It will increase. b. It will decrease. c. It will remain the same. d. It will first increase and then remain constant.
The vertical distance between two identical stones dropped from a tall building will remain the same as they fall.
When two identical stones are dropped from a tall building, neglecting air resistance, both stones will experience the same acceleration due to gravity. This means that they will fall at the same rate and maintain the same vertical distance between them throughout their descent.
Gravity acts equally on both stones, causing them to accelerate downward at approximately 9.8 meters per second squared (m/s²). Since both stones experience the same acceleration, their velocities will increase at the same rate. As a result, the vertical distance between the two stones will not change as they fall.
It's important to note that this scenario assumes ideal conditions, such as no air resistance and no external forces acting on the stones. In reality, factors such as air resistance or variations in initial conditions could cause slight differences in the fall of the stones, leading to a change in the vertical distance between them. However, under the given assumption of negligible air resistance, the vertical distance between the stones will remain the same.
Learn more about free fall:
https://brainly.com/question/13796105
#SPJ11
Fill in the Blanks Type your answers in all of the blanks and submit ⋆⋆ A typical supertanker has a mass of 2.0×10 6
kg and carries oil of mass 4.0×10 6
kg. When empty, 9.0 m of the tanker is submerged in water. What is the minimum water depth needed for it to float when full of oil? Assume the sides of the supertanker are vertical and its bottom is flat. m
The minimum water depth required for a supertanker to float when full of oil is approximately 13.5 meters.
To determine the minimum water depth needed for the supertanker to float when full of oil, we need to consider the concept of buoyancy. According to Archimedes' principle, an object submerged in a fluid experiences an upward buoyant force equal to the weight of the fluid it displaces.
When empty, 9.0 meters of the supertanker is submerged in water. This means that the weight of the water displaced by the empty tanker is equal to the weight of the tanker itself. Therefore, the buoyant force acting on the empty tanker is sufficient to support its weight.
Now, when the tanker is filled with oil, it gains an additional mass of 4.0×10^6 kg. To remain afloat, the buoyant force acting on the tanker must be equal to the combined weight of the tanker and the oil it carries. The buoyant force depends on the volume of water displaced, which in turn depends on the depth to which the tanker sinks.
Since the buoyant force must equal the combined weight of the tanker and the oil, we can set up the equation:
Buoyant force = Weight of tanker + Weight of oil
The weight of the tanker can be calculated as the product of its mass (2.0×10^6 kg) and the acceleration due to gravity (9.8 m/s^2). Similarly, the weight of the oil is the product of its mass (4.0×10^6 kg) and the acceleration due to gravity.
By rearranging the equation and solving for the water depth, we find that the minimum depth required for the tanker to float when full of oil is approximately 13.5 meters.
Learn more about Archimedes' principle:
https://brainly.com/question/787619
#SPJ11
Use Snel's Law to calculate the answer for the following question. If light comes from air enters to the water with 2.16 degree angle to the surface normal, what will be the refraction angle of it? (keep 2 digits after the decimal point). Index of refraction for alr=1. Index of refraction for water = 1,33.
The refraction angle of the light in water is approximately 1.48 degrees.
Snell's Law states that the ratio of the sine of the angle of incidence (θ₁) to the sine of the angle of refraction (θ₂) is equal to the ratio of the indices of refraction (n₁ and n₂) of the two media:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
In this case, the light is coming from air (n₁ = 1) and entering water (n₂ = 1.33). The angle of incidence is given as 2.16 degrees.
Plugging in the values into Snell's Law:
1 * sin(2.16°) = 1.33 * sin(θ₂)
sin(θ₂) = (1 * sin(2.16°)) / 1.33
sin(θ₂) = 0.025902
To find the value of θ₂, we take the inverse sine (or arcsine) of both sides:
θ₂ = arcsin(0.025902)
Using a calculator, we find θ₂ ≈ 1.48 degrees.
To know more about Snell's Law
https://brainly.com/question/31432930
#SPJ11