The gas is placed into a closed container, and during a process, its pressure and temperature decrease. We need to determine the effect on the volume of the gas.
When the pressure and temperature of a gas decrease, we can apply the ideal gas law to analyze the situation. The ideal gas law states that the product of pressure and volume is directly proportional to the product of the number of moles of gas and the gas constant, and inversely proportional to the temperature.
P * V = n * R * T
In this case, we know that the pressure and temperature are decreasing. If we assume the number of moles of gas and the gas constant remain constant, we can rearrange the equation to understand the effect on the volume:
V = (n * R * T) / P
Since the pressure is decreasing, the numerator of the equation remains constant. As a result, the volume of the gas will increase. Therefore, we can say that when the pressure and temperature of a gas decrease, the volume increases.
To know more about ideal gas law :
https://brainly.com/question/30458409
#SPJ11
Find the surface area of revolution about the x-axis of the graph of y=(4-x^2/3) 3/2, 0≤x≤8.
To find the surface area of revolution about the x-axis for the graph of y = (4 - x^(2/3))^(3/2), we can use the formula for surface area of revolution:
Surface Area = 2π ∫[a,b] y * √(1 + (dy/dx)^2) dx
First, let's find the derivative of y with respect to x to get dy/dx:
dy/dx = d/dx (4 - x^(2/3))^(3/2)
= (3/2)(4 - x^(2/3))^(1/2) * d/dx (4 - x^(2/3))
= (3/2)(4 - x^(2/3))^(1/2) * (-2/3)x^(-1/3)
= (-3/2)(4 - x^(2/3))^(1/2) * x^(-1/3)
Next, let's simplify the expression inside the square root:
1 + (dy/dx)^2 = 1 + [(-3/2)(4 - x^(2/3))^(1/2) * x^(-1/3)]^2
= 1 + [(-3/2)^2 * (4 - x^(2/3))] * [x^(-2/3)]
= 1 + (9/4) * (4 - x^(2/3)) * [x^(-2/3)]
= 1 + (9/4) * (4x^(-2/3) - x^(-2/3 + 2/3))
= 1 + (9/4) * (4x^(-2/3) - x^0)
= 1 + (9/4) * (4x^(-2/3) - 1)
= 1 + (9/4) * (4/x^(2/3) - 1)
Now, we can substitute y and √(1 + (dy/dx)^2) into the surface area formula:
Surface Area = 2π ∫[0,8] (4 - x^(2/3))^(3/2) * √(1 + (dy/dx)^2) dx
= 2π ∫[0,8] (4 - x^(2/3))^(3/2) * √(1 + (9/4) * (4/x^(2/3) - 1)) dx
Learn more about Surface Area on the given link:
https://brainly.com/question/16519513
#SPJ11
the basic aim of surveying is to know the surface details and to compute the area and volume for the same. After calculating the cross-sectional areas of each part, we can find its volume by using the following methods 1. Trapezoidal rule or Formula
2. Prismoidal rule or Formula
In surveying, the aim is to gather accurate information about the surface details of a given area and perform calculations related to its area and volume. Once the cross-sectional areas of different parts are determined, the volume can be calculated using two commonly used methods: the trapezoidal rule and the prismoidal rule.
1. Trapezoidal rule: This method involves dividing the cross-sectional area into a series of trapezoids and calculating the area of each trapezoid using the formula: Area = (b1 + b2) * h / 2, where b1 and b2 are the lengths of the parallel sides of the trapezoid, and h is the height or distance between the parallel sides. The areas of all trapezoids are then summed up to find the total volume.
2. Prismoidal rule: This method is an extension of the trapezoidal rule and is used when the cross-sections are not uniform. It involves dividing the cross-section into a series of trapezoids and triangles, calculating the volume of each shape, and then summing them up to find the total volume. The formula for calculating the volume of a trapezoid or triangle is Volume = Area * length, where length is the distance between the cross-sections.
Both the trapezoidal and prismoidal rules are widely used in surveying and provide approximate calculations of volume for irregularly shaped areas. The choice between the two methods depends on the complexity of the cross-sections and the level of accuracy required for the volume calculations.
Learn more about cross-sectional areas visit:
https://brainly.com/question/12820099
#SPJ11
Determine the first three nonzero terms in the Taylor polynomial approximation for the given initial value problem. 3x′′+3tx=0;x(0)=1,x′(0)=0 The Taylor approximation to three nonzero terms is x(t)=+….
The first three nonzero terms in the Taylor polynomial approximation for the given initial value problem 3x′′ + 3tx = 0, with x(0) = 1 and x′(0) = 0, are x(t) = 1.
To find the Taylor polynomial approximation for the given initial value problem, we can use the Taylor series expansion of the solution function.
Let's start by finding the derivatives of the solution function.
Given: 3x′′ + 3tx = 0, with initial conditions x(0) = 1 and x′(0) = 0.
Differentiating the equation with respect to t, we get:
3x′′ + 3tx = 0
Differentiating again, we get:
3x′′′ + 3x + 3t(x′) = 0
Now, let's substitute the initial conditions into the equations.
At t = 0:
3x′′(0) + 0 = 0
3x′′(0) = 0
At t = 0:
3x′′′(0) + 3x(0) + 0 = 0
3x(0) = 0
From the initial conditions, we find that x′′(0) = 0 and x(0) = 1.
Now, let's use the Taylor series expansion of the solution function centered at t = 0:
x(t) = x(0) + x′(0)t + (x′′(0)/2!)t^2 + (x′′′(0)/3!)t^3 + ...
Substituting the initial conditions into the Taylor series expansion, we get:
x(t) = 1 + 0 + (0/2!)t^2 + (0/3!)t^3 + ...
Simplifying, we find that the first three nonzero terms in the Taylor polynomial approximation are:
x(t) = 1 + 0t + 0 + ...
Therefore, the Taylor approximation to three nonzero terms is x(t) = 1.
In summary, the first three nonzero terms in the Taylor polynomial approximation for the given initial value problem 3x′′ + 3tx = 0, with x(0) = 1 and x′(0) = 0, are x(t) = 1.
Learn more about Taylor polynomial from the given link
https://brainly.com/question/2533683
#SPJ11
4. The gusset plate is subjected to the forces of three members. Determine angle 0 for equilibrium. The forces are concurrent at point O. Take D as 10 kN, and Fas 8 kN 7 MARKS y DKN А B OOO X С T
The angle θ for equilibrium is approximately 53.13 degrees.
What is the angle θ for equilibrium when the gusset plate is subjected to concurrent forces from three members?To determine the angle θ for equilibrium, we need to make some assumptions about the missing values and the geometry of the system. Let's assume the following:
Assume Force X is acting vertically upwards.
Assume Force T is acting at an angle of 45 degrees with the horizontal axis.
With these assumptions, we can proceed to solve for the angle θ. Let's label the angles as follows:
Angle between Force D and the horizontal axis = α
Angle between Force F and the horizontal axis = β
Angle between Force T and the horizontal axis = 45 degrees
Angle between Force X and the horizontal axis = 90 degrees
Now, we can write the equations for equilibrium in the x and y directions:
Equilibrium in the x-direction:
T * cos(45°) - X = 0
Equilibrium in the y-direction:
T * sin(45°) + X + D - F = 0
Substituting the known values:
T * (√2/2) - X = 0
T * (√2/2) + X + 10 - 8 = 0
Simplifying the equations:
(√2/2)T - X = 0
(√2/2)T + X + 2 = 0
Adding the two equations together, the X term cancels out:
(√2/2)T + (√2/2)T + 2 = 0
√2T + √2T + 2 = 0
2√2T = -2
T = -1/√2
Now we can solve for θ:
T * cos(θ) = X
(-1/√2) * cos(θ) = X
Substituting the assumed value for X (vertical upward force):
(-1/√2) * cos(θ) = 0
cos(θ) = 0
The angle θ for which cos(θ) = 0 is 90 degrees. Therefore, assuming the missing values and the given assumptions, the angle θ for equilibrium is 90 degrees.
Learn more about angle θ for equilibrium
brainly.com/question/5941152
#SPJ11
Draw the skeletal ("line") structure of 9-methyl-7propyl-1,2,4-decanetriol.
The numbers indicate the position of the methyl (CH3) and propyl (CH2CH2CH3) groups on the carbon chain.
Here is the skeletal or line structure representation of 9-methyl-7-propyl-1,2,4-decanetriol:
CH3 CH3 CH3
| | |
CH3 - C - C - C - C - C - C - C - C - OH
| | |
CH2 CH2 CH2
| | |
CH3 CH3 CH3
In this structure, the horizontal lines represent carbon-carbon (C-C) bonds, and the vertical lines represent carbon-hydrogen (C-H) bonds. The OH groups attached to the carbon atoms are indicated by the "OH" label.
To know more about numbers visit:
brainly.com/question/24908711
#SPJ11
f(x,y,z)=x^2+y^2+z^2 s:z=x^2+y^2=49,0≤z≤49
The given function is F(x, y, z) = x^2 + y^2 + z^2, subject to the constraint z = x^2 + y^2 = 49 and 0 ≤ z ≤ 49.
What is the objective of the given problem and what are the constraints?The objective of the problem is to find the minimum or maximum value of the function F(x, y, z) = x^2 + y^2 + z^2, while satisfying the constraint z = x^2 + y^2 = 49 and the range of 0 ≤ z ≤ 49.
This means that we need to optimize the value of F(x, y, z) within the given constraints.
To solve this problem, we can use the method of Lagrange multipliers. By introducing a Lagrange multiplier λ, we can set up the following equations:
2x = 2λx,
2y = 2λy,
2z = 2λ(z - 49),
x^2 + y^2 - 49 = 0.
By solving these equations simultaneously, we can find the values of x, y, z, and λ that satisfy the equations and the given constraints.
Learn more about function
brainly.com/question/30721594
#SPJ11
The slope of the bending moment diagram at any point is ... the shear force intensity at that point._____ the load intensity at that point. _____always different than zero.
The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is not equal to the load intensity at that point. The shear force intensity at that point is always different than zero.
The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is one of the fundamental relationships of shear force and bending moment that is significant in the study of beams. This relationship is important to comprehend because the slopes of these diagrams offer critical information on the shape and magnitude of internal forces and moments that act within the beam.
The shear force intensity at that point is always different than zero. This is because shear force is the internal force that arises to balance out the external loads that act on the beam. This implies that at any point of the beam, the shear force intensity is always present to support the load intensity at that point.
To know more about shear force intensity visit:
https://brainly.com/question/30763282
#SPJ11
A spherical particle of density 1500 kg/m³ has a terminal velocity of 1 cm/s in a fluid of density 800 kg/m³ and viscosity 0.001 Pa s. Estimate the diameter of the particle.
The diameter of the particle is approximately 17.2 nm.We can estimate the diameter of a spherical particle by using the formula of terminal velocity. Therefore, in order to find the diameter of a spherical particle, let's first understand what is terminal velocity and the formula for it.
Definition of Terminal Velocity:
When a body falls in a medium, the speed increases until it reaches a maximum value, known as terminal velocity. At terminal velocity, the weight of the body is balanced by the upward thrust of the fluid, acting in the opposite direction to the motion. The formula for terminal velocity is:
v =√ (2rg/9η) × (ρs - ρf) × d
where:
v is the terminal velocity of the object in m/s
d is the diameter of the object in meters
ρs is the density of the object in kg/m³
ρf is the density of the fluid in kg/m³
η is the viscosity of the fluid in Pa s
g is the acceleration due to gravity in m/s²
Let's solve the given question:
Given values are:
ρs = 1500 kg/m³
ρf = 800 kg/m³
η = 0.001 Pa s
g = 9.81 m/s²
v = 0.01 m/s (converted from 1 cm/s)
We need to find the diameter of the particle.
Using the formula of terminal velocity, we get:
0.01 = (2 × 9.81 × r / [tex]\sqrt{(9\times0.001)}[/tex] × (1500 - 800) × d
After solving this equation, we get:
0.01 = 76.15 × d × √r
Squaring both sides, we get:
0.0001 = 5803.84 × d × r
Multiplying both sides by r, we get:
0.0001r = 5803.84d × r²
Dividing both sides by 5803.84r, we get:
d = 0.0001 / 5803.84 = 1.72 × [tex]10^{-8[/tex] m = 17.2 nm
Therefore, the diameter of the particle is approximately 17.2 nm.
Learn more about terminal velocity
https://brainly.com/question/2654450
#SPJ11
this are torsional properties for W10x49 do you have the torsional properties for w12x45?J = 1.39 in. a = 62.1 in. Cw = 2070 in.6 W = 23.6 in.2 Sw = 33.0 in.4 3 Q = 13.0 in.³ Q = 30.2 in.³ 4 The flexural properties are as follows: I = 272 in. S = 54.6 in.³ t = 0.560 in. t = 0.340 in.
The torsional properties for W12x45 are:
J = 1.68 in.a = 65.4 in.Cw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³Q = 34.6 in.³ The torsional properties of W12x45 will be:J = 1.68 ina = 65.4 inCw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³ The fiber's response when it is twisted depends on its torsional characteristics.
Given the torsional properties for W10x49 are:
J = 1.39 in.a = 62.1 in.Cw = 2070 in.6W = 23.6 in.2Sw = 33.0 in.4Q = 13.0 in.³Q = 30.2 in.³
The torsional properties of W12x45 will be:J = 1.68 ina = 65.4 inCw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³
Q = 34.6 in.³ Therefore, the torsional properties for W12x45 are:
J = 1.68 in.a = 65.4 in.Cw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³Q = 34.6 in.³
Learn more about torsional properties
https://brainly.com/question/31838400
#SPJ11
The torsional properties for W12x45 are: J = 1.68 in.a = 65.4 in.Cw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³Q = 34.6 in.³ The torsional properties of W12x45 will be:J = 1.68 ina = 65.4 inCw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³
The fiber's response when it is twisted depends on its torsional characteristics.
Given the torsional properties for W10x49 are:
J = 1.39 in.a = 62.1 in.Cw = 2070 in.6W = 23.6 in.2Sw = 33.0 in.4Q = 13.0 in.³Q = 30.2 in.³
The torsional properties of W12x45 will be:J = 1.68 ina = 65.4 inCw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³
Q = 34.6 in.³ Therefore, the torsional properties for W12x45 are:
J = 1.68 in.a = 65.4 in.Cw = 2140 in.6W = 24.7 in.2Sw = 33.4 in.4Q = 15.0 in.³Q = 34.6 in.³
Learn more about torsional properties
brainly.com/question/31838400
#SPJ11
Please help <3 What is the probability that either event will occur?
10
A
5
B
9
16
P(A or B) = P(A) + P(B) - P(A and B)
P(A or B) = [?]
Enter as a decimal rounded to the nearest hundredth..
The probability that either event will occur is 0.4
What is probability?A probability is a number that reflects the chance or likelihood that a particular event will occur. The certainty that an event will occur is 1 which is equivalent to 100%.
Probability = total outcome /sample space
total outcome = 16 + 5 + 5 + 9
total outcome = 35
Therefore;
P(AorB) = P(A) + P(B) - p(A and B)
P(A) = 10/35
P(B) = 9/35
p( A and B) = 5/35
P(A or B) = 10/35 + 9/35 - 5/35
= 14/35 = 0.40
therefore, the probability that either event will occur is 0.40
learn more about probability from
https://brainly.com/question/13604758
#SPJ1
Sess New Buko.3 sen teken Wing Staffiness Method WA001 2x Ow
The number 33795750 appears to be a random numerical value.
What is the significance or meaning of the number 33795750?The number 33795750 is a numeric value without any context provided, so it does not have any specific significance or meaning on its own.
It could represent a quantity, an identifier, or any other numerical value depending on the context in which it is used.
Without additional information or context, it is not possible to determine the exact meaning or purpose of this number.
Learn more about number
brainly.com/question/3589540
#SPJ11
According to drilling and completion engineering answer the following question: The well depth is 3000m with diameter 215.9mm (8-1/2in). The maximum bit weight is 150kN and the well angle is 2º. Buoyancy coefficient KB is 0.90 and safety factor is 1.30. The drill collar gravity qe is 1.53 kN/m. Please determine how much length of drill collar pipes used for the drilling.
The length of drill collar pipes used for drilling is 53.5 meters.
To determine how much length of drill collar pipes is used for the drilling, we need to calculate the weight required to overcome the buoyancy force acting on the drill collar, and then use that weight to calculate the length of the drill collar pipe used. The formula for calculating the weight required to overcome buoyancy is as follows:
W = Q × (1 + KB)
Where, W is the weight required to overcome buoyancy, Q is the weight of the drill collar, KB is the buoyancy coefficient, which is given as 0.90
Using the formula above, we can calculate the weight required to overcome buoyancy as follows:
W = qe × LDC × (1 + KB)
where, qe is the drill collar gravity, which is given as 1.53 kN/m
LDC is the length of the drill collar pipe used
We can substitute the given values and simplify as follows:
150 kN = 1.53 kN/m × LDC × (1 + 0.90)150
kN = 1.53 kN/m × LDC × 1.9LDC = 150 kN ÷ (1.53 kN/m × 1.9)
LDC = 53.5 m
Therefore, the length of drill collar pipes used for drilling is 53.5 meters.
Learn more about buoyancy visit:
brainly.com/question/30641396
#SPJ11
Consider the beam shown in Fig.4. The loading consists of a point load P of 37.4 kN at Cand a uniformly distributed load w of 2.8 kN/m from A to B. Given E - 200 GPa and I-200x106mm determine the absolute value of deflection at A. Give your answer in mm with three decimal places. P w II A B 2 m sk +m ו 4 sk 기 Fig. +
The absolute value of the deflection at point A is approximately 0.744 mm.
How much does point A deflect in millimeters?Calculate the reaction forces at support A.
To determine the absolute value of deflection at A, we first need to calculate the reaction forces at support A. The point load P of 37.4 kN acts at point C, and the uniformly distributed load w of 2.8 kN/m is applied from point A to B.
Summing the vertical forces:
Ra + Rb - P - (w * AB) = 0
Since the beam is symmetric, Ra = Rb.
Therefore, Ra + Ra - 37.4 kN - (2.8 kN/m * 2 m) = 0
2Ra - 37.4 kN - 5.6 kN = 0
2Ra = 43 kN
Ra = 21.5 kN
Calculate the deflection at point A.
The deflection at point A can be determined using the formula for the deflection of a simply supported beam under a point load:
δA = [tex](P * AB^3) / (6 * E * I)[/tex]
Substituting the given values:
δA = [tex](37.4 kN * 2^3) / (6 * 200 GPa * 200x10^6 mm^4)[/tex]
δA = 0.00074375 mm
Therefore, the absolute value of the deflection at point A is approximately 0.744 mm.
Learn more about structural beam deflection
brainly.com/question/30763702
#SPJ11
What is the square unit ig (15pts)
Answer: 1406.25 square meters
Step-by-step explanation:
Use the definition of the derivative to find the slope of the tangent line to the graph of the given function at any point. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x) = 4x² + 7x Step 1: Step 2: Step 3: Step 4: f'(x) = lim h→0 f(x + h) = 4(x + h)² +7(x+h) f(x + h)-f(x) = h(4(2x+h)+7) f(x + h) − f(x) = h f(x+h)-f(x) h 4(2x+h) +7 8x + 7 X X (Expand your answer completely.) (Factor your answer completely.)
Let f(x) = x² + 5x. (a) Find the derivative f' off by using the definition of the derivative. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x + h) = (x + h) +5(x+h) (b) Step 1: Step 2: Step 3: Step 4: f'(x) = _lim_ h→0 f(x +h)-f(x) = f(x+h)-f(x) h f(x +h)-f(x) h (Expand your answer completely.) X (Factor your answer completely.) Find an equation of the tangent line to the graph of f at the point (1,4). Give your answer in the slope-intercept form.
The equation of the tangent line to the graph of f at the point (1,4) is y = 15x - 11 in slope-intercept form.
Let's first find the derivative of the function f(x) = 4x² + 7x using the definition of the derivative.
Step 1: Find f(x + h)
f(x + h) = 4(x + h)² + 7(x + h)
= 4(x² + 2xh + h²) + 7x + 7h
= 4x² + 8xh + 4h² + 7x + 7h
Step 2: Find f(x)
f(x) = 4x² + 7x
Step 3: Find the difference f(x + h) - f(x)
f(x + h) - f(x) = (4x² + 8xh + 4h² + 7x + 7h) - (4x² + 7x)
= 8xh + 4h² + 7h
Step 4: Divide by h and take the limit as h approaches 0
f'(x) = lim(h→0) [f(x + h) - f(x)] / h
= lim(h→0) [(8xh + 4h² + 7h) / h]
= lim(h→0) [8x + 4h + 7]
= 8x + 7
So, the derivative of f(x) = 4x² + 7x is f'(x) = 8x + 7.
Now, let's find an equation of the tangent line to the graph of f at the point (1,4).
Using the point-slope form of a line, y - y₁ = m(x - x₁), where (x₁, y₁) is the point and m is the slope, we have:
y - 4 = (8(1) + 7)(x - 1)
y - 4 = (8 + 7)(x - 1)
y - 4 = 15(x - 1)
y - 4 = 15x - 15
y = 15x - 11
To learn more about derivative click here
brainly.com/question/29144258
#SPJ11
Consider the expressions shown below.
A
-8x²-3x+48x²
Complete each of the following statements with the letter that represents the expression.
(3x²7x+14) + (5x² + 4x - 6) is equivalent to expression
523) + (-10x² + 2x + 7) is equivalent to expression
(12x²2x13) + (−4x² + 5x + 9) is equivalent to expression
(2x²
-
B
C
3x + 8 8x² + 3x
-
-
4
(3x² + 7x + 14) + (5x² + 4x - 6) is equivalent to expression B.
(-10x² + 2x + 7) does not match any given expression.
(12x² + 2x + 13) + (-4x² + 5x + 9) is equivalent to expression A.
(2x² - 4) does not match any given expression.
To complete the statements, we need to match each given expression with the corresponding letter. Let's analyze each expression and find the matching letter.
Expression (3x² + 7x + 14) + (5x² + 4x - 6):
By combining like terms, we get 8x² + 11x + 8. This matches expression B, so the first statement can be completed as follows:
(3x² + 7x + 14) + (5x² + 4x - 6) is equivalent to expression B.
Expression (-10x² + 2x + 7):
This expression does not match any of the given expressions A, B, or C. Therefore, we cannot complete the second statement with any of the provided options.
Expression (12x² + 2x + 13) + (-4x² + 5x + 9):
By combining like terms, we get 8x² + 7x + 22. This matches expression A, so the third statement can be completed as follows:
(12x² + 2x + 13) + (-4x² + 5x + 9) is equivalent to expression A.
Expression (2x² - 4):
This expression does not match any of the given expressions A, B, or C. Therefore, we cannot complete the fourth statement with any of the provided options.
For more such question on expression. visit :
https://brainly.com/question/1859113
#SPJ8
Type the correct answer in each box. Use numerals instead of words. If necessary, use / for the fraction bar(s).
The slope of the line shown in the graph is _____
and the y-intercept of the line is _____ .
Answer:
slope = 2/3, y-intercept = 6
Which of the following subsets of P_2 are subspaces of P_2? A. {p(t) | p(5) = 5} B. {p(t) | p(-t) = -p(t) for all t} c. {p(t) | Sp(t)dt = 0} D. {p(t) | p'(t) + 7p(t) + 1 = 0} E. {p(t) | p'(2) = p(7)}
F. {p(t) | p' (t) is constant}
The subsets of P_2 that are subspaces of P_2 are B and F.
To determine which subsets of P_2 are subspaces, we need to check if they satisfy the three requirements for subspaces: closure under addition, closure under scalar multiplication, and containing the zero vector.
Subset B, {p(t) | p(-t) = -p(t) for all t}, is a subspace because it fulfills all three requirements.
If p(t) and q(t) are in B, then (p+q)(t) = p(t) + q(t) satisfies p(-t) = -p(t) and q(-t) = -q(t), hence (p+q)(-t) = -p(t) - q(t) = -(p(t) + q(t)), which shows closure under addition.
Similarly, if p(t) is in B and c is a scalar, then (c * p)(t) = c * p(t) satisfies (c * p)(-t) = c * p(-t) = -c * p(t), demonstrating closure under scalar multiplication.
Finally, the zero vector, which is the polynomial p(t) = 0, satisfies p(-t) = -p(t) for all t, so it is contained in B.
Subset F, {p(t) | p'(t) is constant}, is also a subspace.
If p(t) and q(t) are in F, then (p+q)(t) = p(t) + q(t) has a constant derivative, fulfilling closure under addition.
If p(t) is in F and c is a scalar, then (c * p)(t) = c * p(t) has a constant derivative, demonstrating closure under scalar multiplication. Additionally, the zero vector, p(t) = 0, has a constant derivative, so it is contained in F.
Learn more about subsets
brainly.com/question/31739353
#SPJ11
3) 12 tons of a mixture of paper and other compostable materials has a moisture content of 8%. The intent is to make a mixture for composting of 60% moisture. How many tons of waterost sludge must be added to the solids to achieve this moisture concentration in the compost pile?
9.6 tons of water or watered sludge must be added to the solids to achieve the moisture concentration in the compost pile.
12 tons of a mixture of paper and other compostable materials with a moisture content of 8% is to be made into a compost pile with 60% moisture content. To achieve this, the amount of water or watered sludge to be added to the solids needs to be calculated.
Let's first assume that the weight of the dry material present in the 12 tons of mixture is x tons. We can write it mathematically as:
Weight of dry material + Weight of water = 12 tons
Weight of dry material = 12 - Weight of water
Weight of dry material = x tons
Now, the moisture content in the compost pile is to be 60%.
Therefore, weight of water in the compost pile = 60% of the total weight of compost pile
We know that the total weight of compost pile = weight of dry material + weight of water= x + weight of water
If the moisture content of compost pile is 60%, then weight of water = 60% of total weight of compost pile
= 0.6 (x + weight of water)
Now, we can substitute the value of weight of dry material (i.e., x) from the first equation in the above expression and solve for weight of water.
0.6 (x + weight of water) = weight of water + 0.08 (12 tons)0.6x + 0.6 weight of water = weight of water + 0.96 tons
0.6x - 0.4 weight of water = 0.96 tons
0.6x = 0.96 + 0.4 weight of water
0.6x - 0.4 weight of water = 0.96
Now, if we substitute the value of x = 12 - weight of water in the above equation and solve for weight of water, we will get the answer.
0.6(12 - weight of water) - 0.4
weight of water = 0.960.
4(12 - weight of water) = 0.96
Simplifying further, we get: 4.8 - 0.4
weight of water = 0.96-0.4
weight of water = -3.84
weight of water = 3.84/0.4=9.6 tons
Therefore, 9.6 tons of water or watered sludge must be added to the solids to achieve the moisture concentration in the compost pile.
To know more about moisture, visit:
https://brainly.com/question/32171017
#SPJ11
Suppose that an economy has the per-worker production function given as: y t
=4k 1
0.5
, where y is output per worker and k is capital per worker. In addition, national savings is given as: S t
=0.40Y t
, where S is national savings and Y is total output. The depreciation rate is d=0.10 and the population growth rate is n=0.05. The steady-state value of the capital-labor ratio, k is 113.78. The steady-state value of output per worker. y is 42.67. The steady-state value of consumption per worker, c is 25.60. Use the same production function, and the original savings rate of 0.40. However, increase the population growth rate to 0.08. S t
=0.40Y t
The depreciation rate is d=0.10 and the population growth rate is n=0.08. (Enter all responses as decimals rounded to two places.) What is the new steady-state value of the capital-labor ratio, K ? What is the new steady-state value of output per worker, y ? What is the new steady-state value of consumption per worker, c ?
Increasing the population growth rate decreases the steady-state values of the capital-labor ratio, output per worker, and consumption per worker.
What is the impact of increasing the population growth rate on the steady-state values of capital-labor ratio, output per worker, and consumption per worker?To find the new steady-state values of the capital-labor ratio (K), output per worker (y), and consumption per worker (c), we need to apply the changes in the population growth rate (n) while keeping the other parameters constant.
Given:
Original steady-state values:
Capital-labor ratio (k) = 113.78
Output per worker (y) = 42.67
Consumption per worker (c) = 25.60
New parameters:
Population growth rate (n) = 0.08
To find the new steady-state values, we'll use the following equations:
1. New steady-state capital-labor ratio (K):
K = (s * Y) / (d + n + g)
where s is the savings rate, Y is the total output, d is the depreciation rate, n is the population growth rate, and g is the technological progress rate (assumed to be zero in this case).
2. New steady-state output per worker (y):
y = Y / L
where L is the labor force.
3. New steady-state consumption per worker (c):
c = (1 - s) * y
Let's calculate the new steady-state values using the given information:
1. New steady-state capital-labor ratio (K):
K = (0.40 * Y) / (0.10 + 0.08)
K = 0.40Y / 0.18
K = 2.22Y
2. New steady-state output per worker (y):
y = Y / L
y = Y / (L0 * (1 + n))
y = 42.67 / (113.78 * (1 + 0.08))
y ≈ 42.67 / 122.96
y ≈ 0.347
3. New steady-state consumption per worker (c):
c = (1 - s) * y
c = (1 - 0.40) * 0.347
c ≈ 0.60 * 0.347
c ≈ 0.208
Therefore, the new steady-state values are approximately:
New steady-state capital-labor ratio (K) ≈ 2.22Y
New steady-state output per worker (y) ≈ 0.347
New steady-state consumption per worker (c) ≈ 0.208
Learn more about capital-labor ratio
brainly.com/question/30157390
#SPJ11
Estimate the largest diameter of spherical particle of density 2000 kg/m³ which would be expected to obey Stokes' law in air of density 1.2 kg/m³ and viscosity 18 x 10 6 Pa s
The diameter of the spherical particle is approximately 0.023 m. Density of spherical particle = 2000 kg/m³, Density of air = 1.2 kg/m³ and Viscosity of air = 18 × 10⁻⁶ Pa s
Formula used:
Stokes' law states that the force acting on a particle is given by F = 6πrvη, where
F is the force acting on the particle,
r is the radius of the particle,
v is the velocity of the particle,
η is the viscosity of the fluid.
Equating the buoyancy force and the viscous force on the particle, we have:
4/3 × πr³ (ρp - ρf)g = 6πrvη,
where
g is the acceleration due to gravity,
ρp is the density of the particle,
ρf is the density of the fluid.
Rearranging the above equation, we get:
r = ((2*(ρp - ρf)*V)/(9η*g))^0.5,
where V is the volume of the spherical particle.
Assuming the particle is spherical, then the diameter of the spherical particle is given by the formula: d = 2r.
Formula substituted:
ρp = 2000 kg/m³
ρf = 1.2 kg/m³
η = 18 × 10⁶ Pa s
Let the diameter be d. Then the radius is r = d/2.
Using Stokes' law, the radius of the spherical particle is:
r = [2×(ρp-ρf)×V]/[9×η×g]
Given that the density of the spherical particle is 2000 kg/m³,
so the mass of the particle is m = ρpV = (4/3)πr³ρp.
The buoyant force acting on the particle is given by Fb = ρfVg = (4/3)π(d/2)³ρfg.
The weight of the particle is given by W = mg = (4/3)π(d/2)³ρpg.
Substituting the values of Fb and W in the equation Fb = 6πrηv, we have:
(4/3)×π×(d/2)³×ρfg = 6π×(d/2)×η×v,
=> d³ = (54ηv)/(ρg),
=> d = [(54ηv)/(ρg)]^(1/3).
Substituting the given values of ρf, η, and g, we get:
d = [(54×18×10⁻⁶ × 9.8)/(2000 - 1.2)]^(1/3),
d = 0.023 m (approximately).
Hence, the diameter of the spherical particle is approximately 0.023 m.
Learn more about Viscosity of air
https://brainly.com/question/30901839
#SPJ11
A 4 x 4 pile group of 1-ft diameter steel pipe piles with flat end plates are installed at a 2-diameter spacing to support a heavily loaded column from a building.
1) Piles are driven 200 feet into a clay deposit of linearly increasing strength from 600 psf at the ground surface to 3,000 psf at the depth of 200 feet and itsundrained shear strength maintains at 3,000 psf from 200 feet and beyond. The groundwater table is located at the ground surface. The submerged unit weight of the clay varies linearly from 50 pcf to 65 pcf. Determine the allowable pile group capacity with a factor of safety of 2.5
The allowable pile group capacity with a factor of safety of 2.5 is approximately 33,738.8 psf.
To determine the allowable pile group capacity with a factor of safety of 2.5, we need to consider the ultimate pile group capacity and apply the factor of safety.
The ultimate pile group capacity can be calculated using the Broms method for cohesionless soils.
Given data:
Pile diameter (d) = 1 ft
Spacing between piles (s) = 2 × d = 2 ft
Length of piles (L) = 200 ft
Undrained shear strength of clay (c) = 3000 psf
Submerged unit weight of clay (γ) varies linearly from 50 pcf to 65 pcf
Step 1: Calculate the average submerged unit weight of the clay ([tex]\gamma_{avg[/tex]):
[tex]\gamma_{avg[/tex] = (γ₁ + γ₂) / 2
[tex]\gamma_{avg[/tex] = (50 + 65) / 2
= 57.5 pcf
Step 2: Calculate the average undrained shear strength of the clay ([tex]c_{avg[/tex]):
[tex]c_{avg[/tex] = c
= 3000 psf
Step 3: Calculate the average effective overburden pressure (σ_avg):
[tex]\sigma_{avg}=\gamma_{avg}\times L[/tex]
[tex]\sigma_{avg}[/tex] = 57.5 × 200
= 11,500 psf
Step 4:
Calculate the ultimate bearing capacity of a single pile (Qult):
Qult = [tex](c_{avg} * A) + (\sigma_{avg} * Nq * A) + (0.5 * \gamma_{avg} * B * N\gamma)[/tex]
Where:
A = Area of a single pile
= π × (d/2)²
B = Width of the pile group
= s + d
= 3 ft
Nq and Nγ are bearing capacity factors that depend on the pile group configuration.
For a 4 × 4 pile group,
Nq = 8.3 and
Nγ = 20.
A = π * (1/2)²
= 0.7854 ft²
Qult = (3000 × 0.7854) + (11,500 × 8.3 × 0.7854) + (0.5 × 57.5 × 3 × 20)
Qult ≈ 5891 + 76731 + 1725 = 84,347 psf
Step 5: Calculate the allowable pile group capacity (Qallow) with a factor of safety (FoS) of 2.5:
Qallow = Qult / FoS
Qallow = 84,347 / 2.5
≈ 33,738.8 psf
Therefore, the allowable pile group capacity with a factor of safety of 2.5 is approximately 33,738.8 psf.
To know more about factor, visit
https://brainly.com/question/24924507
#SPJ11
Find the indefinite integral. [(x + 5) 5)√8-x dx
Answer:
The answer is
=
2
x
2
+
2
x
4
+
C
Explanation:
We use
∫
x
n
d
x
=
x
n
+
1
n
+
1
+
C
(
n
≠
−
1
)
So,
∫
(
−
4
x
3
−
8
x
5
)
d
x
=
∫
(
−
4
x
−
3
−
8
x
−
5
)
d
x
=
−
4
⋅
x
−
3
+
1
−
3
+
1
−
8
⋅
x
−
5
+
1
−
5
+
1
+
C
=
2
x
2
+
2
x
4
+
C
here is the ans both in image and typed ..
mark me brainliest
a) Identify the singularities in the Schwarzschild metric. Which singularities are physical singularities and which are co-ordinate singularities. Which coordinate transformation (just the name of the alternative coordinate system; you don't need to quote the actual equation[s] for the transformation) can be performed to eliminate the coordinate singularity? [6] b) State the mathematical reason why no object can remain stationary at fixed Schwarzschild coordinates (r,θ,ϕ) inside the Schwarzschild radius of a Schwarzschild black hole.
a. The Schwarzschild metric is a metric that describes the geometry of space-time outside a spherical, non-rotating mass, such as a star, a planet, or a black hole and b) an object cannot remain stationary at fixed Schwarzschild coordinates (r,θ,ϕ) inside the Schwarzschild radius of a Schwarzschild black hole because of the curvature of space-time.
a) The Schwarzschild metric is a metric that describes the geometry of space-time outside a spherical, non-rotating mass, such as a star, a planet, or a black hole. A singularity is a point in the metric where the metric coefficients (the terms in the metric tensor) are not defined. It is usually a point where the curvature of the space-time becomes infinite.
The Schwarzschild metric has two types of singularities, namely physical singularities and coordinate singularities. The physical singularities are points where the curvature of the space-time becomes infinite, whereas the coordinate singularities are points where the metric coefficients are not defined.
There are two physical singularities in the Schwarzschild metric, namely the singularity at the center of the black hole (r = 0) and the singularity at the event horizon (r = 2M). The singularity at r = 0 is a point of infinite density and infinite curvature, while the singularity at r = 2M is a point of infinite curvature but finite density. The coordinate singularities are located at r = 0, r = 2M, and θ = 0,π.
The coordinate singularity at r = 2M is called the Schwarzschild singularity, while the coordinate singularities at r = 0 and θ = 0,π are called the coordinate poles. The coordinate transformation that can be performed to eliminate the coordinate singularity at the Schwarzschild singularity is called the Kruskal-Szekeres transformation.
b) An object cannot remain stationary at fixed Schwarzschild coordinates (r,θ,ϕ) inside the Schwarzschild radius of a Schwarzschild black hole because of the curvature of space-time. The reason for this is that the Schwarzschild metric is a metric that describes the geometry of space-time outside a spherical, non-rotating mass, such as a star, a planet, or a black hole.
Inside the Schwarzschild radius of a black hole, the curvature of space-time becomes so large that it becomes impossible for an object to remain stationary at fixed Schwarzschild coordinates (r,θ,ϕ). This is because the gravitational force becomes so strong that the object would need to have an infinite amount of energy to stay at rest at this position. Thus, the object would be dragged towards the singularity, where it would be crushed by the infinite curvature of space-time.
Learn more about Schwarzschild
https://brainly.com/question/29534114
#SPJ11
Inside the Schwarzschild radius, the gravity is so strong that it becomes impossible for any object to resist being pulled towards the singularity, making it impossible for anything to remain stationary.
a) In the Schwarzschild metric, there are two types of singularities: physical singularities and coordinate singularities. The physical singularities occur at the center of a black hole and are associated with infinite curvature and density. These singularities are believed to be where the laws of physics break down.
The coordinate singularities, on the other hand, are artifacts of the coordinate system used to describe the spacetime. In the Schwarzschild metric, there are two coordinate singularities: one at r = 0 and another at r = 2M, where M is the mass of the black hole.
To eliminate the coordinate singularity at r = 2M, a coordinate transformation called the Kruskal-Szekeres coordinates can be performed. This transformation maps the entire Schwarzschild spacetime, including the region inside the event horizon, onto a new coordinate system where the singularity at r = 2M is removed.
b) The reason why no object can remain stationary at fixed Schwarzschild coordinates (r, θ, ϕ) inside the Schwarzschild radius of a Schwarzschild black hole is because the gravitational pull becomes infinite at the singularity. This means that any object within the Schwarzschild radius will be inexorably pulled towards the singularity and cannot remain stationary.
The mathematical reason behind this is that the metric component gtt (the time-time component of the metric tensor) becomes zero at the Schwarzschild radius. This leads to a singularity in the gravitational potential, resulting in an infinite gravitational force.
Learn more about Schwarzschild radius
https://brainly.com/question/31461186
#SPJ11
Finding tangent planes through certain "anchors" and certain directions: (a) Find all planes which (i) are tangent to the elliptic paraboloid z = x² + y², and (ii) pass through both points P= (0, 0, -1) and Q = (2,0,3). How many such planes are there? (b) Find all planes which (i) are tangent to the surface z = x + xy² - y³, (ii) are parallel to the vector = (3, 1, 1), and (iii) pass through the point P = (-1, -2, 3). How many such planes are there? (c) Find all planes which (i) are tangent to the surface z = x² + sin y, (ii) are parallel to the x-axis, and (iii) pass through the point P = (0,0,-5). How many such planes are there
(a) There are infinitely many planes that are tangent to the elliptic paraboloid z = x² + y² and pass through both points P = (0, 0, -1) and Q = (2, 0, 3).
(b) There is a unique plane that is tangent to the surface z = x + xy² - y³, is parallel to the vector (3, 1, 1), and passes through the point P = (-1, -2, 3).
(c) There is no plane that is tangent to the surface z = x² + sin y, parallel to the x-axis, and passes through the point P = (0, 0, -5).
(a) To find the planes tangent to the elliptic paraboloid z = x² + y² and passing through both points P = (0, 0, -1) and Q = (2, 0, 3), we need to consider that the tangent plane to a surface at a given point has the same normal vector as the gradient of the surface at that point. The gradient of z = x² + y² is given by ∇z = (2x, 2y, -1).
Since the tangent plane must pass through both P and Q, we can construct a system of equations to find the planes. However, since the system will be underdetermined, there are infinitely many solutions, representing infinitely many planes.
(b) For the surface z = x + xy² - y³, to find a plane that is tangent to the surface, parallel to the vector (3, 1, 1), and passes through the point P = (-1, -2, 3), we can find the gradient of the surface and set it equal to the given direction vector.
The gradient of z = x + xy² - y³ is ∇z = (1 + y², 2xy - 3y², 1 + 2xy). By setting ∇z equal to the given direction vector (3, 1, 1), we can solve for x and y to find the unique solution. Once we have x and y, we can substitute them into the equation of the surface to find the value of z. This will give us the coefficients of the plane equation.
(c) The surface z = x² + sin y does not have any planes that are tangent to the surface, parallel to the x-axis, and pass through the point P = (0, 0, -5). This is because the gradient of the surface, which represents the direction of maximum change, is not parallel to the x-axis at any point. Therefore, there are no planes satisfying all the given conditions.
Learn more about Tangent
brainly.com/question/10053881
#SPJ11
b. The present water consumption in the city is 10,000 {~m}^{3} / {d} and the existing treatment plant has a design capacity of 18,500 {~m}^{3} / {d} at maximum
if water consumption increases in the future, the city may need to consider expanding or upgrading the treatment plant to meet the growing demand.
The current water consumption in the city is 10,000 m³/d (cubic meters per day), while the existing treatment plant has a design capacity of 18,500 m³/d. This means that the treatment plant is designed to handle a maximum of 18,500 m³ of water per day.
With the current water consumption of 10,000 m³/d, the treatment plant is operating below its maximum capacity. This is a good thing because it means that the treatment plant has enough capacity to meet the current water demand of the city.
If the water consumption increases in the future and exceeds the design capacity of the treatment plant, it may lead to water shortages or inadequate treatment of water. In such a scenario, the treatment plant may need to be upgraded or expanded to handle the increased water demand.
It's important for the city to monitor its water consumption and plan for future needs to ensure that there is enough capacity in the treatment plant to provide clean and safe water to its residents.
In summary, the current water consumption in the city is 10,000 m³/d, and the existing treatment plant has a design capacity of 18,500 m³/d. The treatment plant is currently operating below its maximum capacity, but if water consumption increases in the future, the city may need to consider expanding or upgrading the treatment plant to meet the growing demand.
Learn more about capacity from the link:
https://brainly.com/question/29707733
#SPJ11
The present water consumption is 10,000 m³/d, which is lower than the treatment plant's design capacity of 18,500 m³/d. This suggests that the treatment plant is currently able to meet the city's water demand.
However, future increases in water consumption may require further action to ensure sufficient supply.
The present water consumption in the city is 10,000 m³/d, while the existing treatment plant has a design capacity of 18,500 m³/d at maximum. This means that the current water consumption is less than the treatment plant's maximum capacity.
To understand the situation, we can compare the present water consumption to the design capacity. Currently, the city is consuming 10,000 m³ of water per day, which is less than the maximum capacity of the treatment plant. This indicates that the treatment plant is able to meet the current water demand of the city.
However, it is important to note that the treatment plant may reach its maximum capacity in the future if the water consumption increases. In that case, additional measures such as expanding the treatment plant's capacity or implementing water conservation initiatives may be necessary to meet the growing demand.
Learn more about water conservation:
https://brainly.com/question/30333660?referrer=searchResults
#SPJ11
Q. Is 35Cl detectable by NMR in theory? Either way, explain why?
Q. Why should you use deuterated solvents such as CD3OD and CDCl3 instead of non-deuterated solvents such as acetone and methanol to dissolve organic compounds for NMR analysis?
Yes, 35Cl is detectable by NMR in theory.
NMR (nuclear magnetic resonance) spectroscopy is a technique that provides valuable information about the structure and properties of molecules. NMR is based on the interaction between the nuclei of atoms and a strong magnetic field. In the case of 35Cl, which is the stable isotope of chlorine, it possesses a spin that can be detected using NMR. The NMR signal from 35Cl appears as a peak in the spectrum, indicating its presence in the sample.
However, it's important to note that the sensitivity of NMR for detecting 35Cl can vary depending on the instrument's capabilities and the concentration of the compound being analyzed. In some cases, the signal from 35Cl may be weak or overshadowed by signals from other atoms in the molecule. Nevertheless, in theory, 35Cl is detectable by NMR and can provide valuable information about the molecular structure and environment.
Know more about NMR here:
https://brainly.com/question/30667400
#SPJ11
Solve the problem. 4) If the price charged for a bolt is p cents, then x thousand bolts will be sold in a certain hardware How many bolts must be sold to maximize revenue? (8 points) store, where p = 38 - A) 456 thousand bolts C) 228 bolts B) 228 thousand bolts D) 456 bolts
The number of bolts that must be sold to maximize revenue is: C) 228 bolts.
How to calculate the number of bolts that must be sold to maximize revenue?From the information provided, the amount of revenue with respect to price that's being generated in this scenario can be calculated by using the following function (equation):
R(x) = x × P(x)
Where:
x represents the number of units sold.p(x) represents the unit price.Since it is a revenue function, we would simply substitute the value of the unit price and then take the first derivative with respect to x as follows:
Revenue, R(x) = x × P(x)
Revenue, R(x) = (38 - x/12) × x
Revenue, R(x) = 38x - x²/12
Marginal revenue, R'(x) = 38 - x/6
0 = 38 - x/6
x/6 = 38
x = 6 × 38
x = 228 bolts.
Read more on revenue here: brainly.com/question/13800671
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
PLEASE HELPPP
Use the midpoint formula to
select the midpoint of line
segment EQ.
E(-2,5)
Q(-3,-6)
X
The calculated value of the midpoint of the line is (-2.5, -0.5)
How to calculate the midpoint of the lineFrom the question, we have the following parameters that can be used in our computation:
E(-2,5) and Q(-3,-6)
The midpoint of the line is calculated as
Midpoint = 1/2(E + Q)
Substitute the known values in the above equation, so, we have the following representation
Midpoint = 1/2(-2 - 3, 5 - 6)
Evaluate
Midpoint = (-2.5, -0.5)
Hence, the midpoint of the line is (-2.5, -0.5)
Read more about midpoint at
https://brainly.com/question/28462165
#SPJ1
Prove the following: (i) If gcd(a,b)=1 and c∣a, then gcd(b,c)=1 (ii) If gcd(a,b)=1 then gcd(ac,b)=gcd(c,b) (iii) If gcd(a,b)=1 and c∣(a+b), then gcd(a,c)=gcd(b,c)=1 (iv) If gcd(a,b)=1,d∣ac and d∣bc, then d∣c,
(i) d is a common divisor of b and c, it follows that d=1. gcd(b,c)=1. (ii) gcd(ac,b)=gcd(c,b). (iii) e=1, gcd(a,b)=1. (iv) gcd(a,b)=1, it follows that d∣c.
(i) If gcd(a,b)=1 and c∣a, then gcd(b,c)=1
Suppose gcd(a,b)=1 and c∣a.
Then there exist integers x and y such that ax+by=1, as gcd(a,b)=1.
Let d=gcd(b,c), then d∣b and d∣c, and therefore d∣ax+by=1.
Since d is a common divisor of b and c, it follows that d=1.
Hence gcd(b,c)=1.
(ii) If gcd(a,b)=1 then gcd(ac,b)=gcd(c,b)
Suppose gcd(a,b)=1.
Let d=gcd(ac,b), then d∣ac and d∣b.
Let p be a prime number, which divides d.
Then, p∣ac and p∣b.
Since gcd(a,b)=1, it follows that p does not divide a.
Therefore, p∣c.
Hence p is a common divisor of c and b.
Therefore, gcd(ac,b)≤gcd(c,b).
Now, let d=gcd(c,b).
Then d∣c and d∣b.
Therefore, d∣ac, and hence d∣gcd(ac,b).
Therefore, gcd(c,b)≤gcd(ac,b).
Therefore, gcd(ac,b)=gcd(c,b).
(iii) If gcd(a,b)=1 and c∣(a+b), then gcd(a,c)=gcd(b,c)=1
Let d=gcd(a,c).
Then d∣a and d∣c.
Therefore, d∣a+b.
Since gcd(a,b)=1, it follows that d∣b.
Therefore, d is a common divisor of a and b.
Hence, d=1, since gcd(a,b)=1.
Similarly, let e=gcd(b,c). Then e∣b and e∣c.
Therefore, e∣a+b.
Therefore, e is a common divisor of a and b.
Hence, e=1, since gcd(a,b)=1.
(iv) If gcd(a,b)=1,d∣ac and d∣bc, then d∣c
Suppose gcd(a,b)=1,d∣ac and d∣bc.
Since d∣ac, it follows that d∣a or d∣c.
Similarly, d∣b or d∣c.
Since gcd(a,b)=1, it follows that d∣c.
To know more about common divisor visit:
https://brainly.com/question/32851476
#SPJ11