Rank these least polar=1 to most polar=11 and why the most polar is the most polar

Answer:

4.0026 atomic mass unit

Explanation:

The symbol "He" represents the chemical element helium. Helium is a colorless, odorless, and non-toxic gas that is the second lightest element in the periodic table. It is represented by the atomic number 2 and has an atomic mass of about 4.0026 atomic mass units (u). Helium is known for its low boiling point, making it commonly used as a cryogenic refrigerant and for filling balloons. It is also used in various scientific and industrial applications, such as cooling superconducting magnets, as a shielding gas in welding, and as a component in gas chromatography.

There are approximately 1.203 × 10^24 atoms of oxygen in 60 grams of acetic acid.

To determine the number of atoms of oxygen in 60 grams of acetic acid (CH3COOH), we need to consider the molar mass and the molecular formula of acetic acid.

The molar mass of acetic acid can be calculated by summing the atomic masses of each element in its molecular formula. The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are approximately 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.

Molar mass of CH3COOH = (1 × 12.01 g/mol) + (4 × 1.01 g/mol) + (2 × 16.00 g/mol) + 1.01 g/mol

= 60.05 g/mol

Now, we can calculate the number of moles of acetic acid in 60 grams using the molar mass:

Number of moles = Mass / Molar mass

= 60 g / 60.05 g/mol

≈ 0.999 moles

From the molecular formula of acetic acid, we can see that there are two atoms of oxygen in each molecule.

Therefore, the number of atoms of oxygen in 60 grams of acetic acid can be calculated by multiplying the number of moles by the Avogadro's number, which represents the number of particles (atoms, molecules, or ions) in one mole of a substance. Avogadro's number is approximately 6.022 × 10^23 particles/mol.

Number of atoms of oxygen = Number of moles × Avogadro's number × Number of oxygen atoms in one molecule

= 0.999 moles × 6.022 × 10^23 particles/mol × 2

≈ 1.203 × 10^24 atoms

For more such questions on acetic acid. visit:

https://brainly.com/question/15231908

#SPJ8

The amount of heat required to raise the temperature of 85.5 grams of sand from 20°C to 30°C is 855 joules.

To calculate the amount of heat required to raise the temperature of a substance, we can use the formula:

Q = m * c * ΔT

Where:

Q = heat energy (in joules)

m = mass of the substance (in grams)

c = specific heat capacity of the substance (in J/g°C)

ΔT = change in temperature (in °C)

Given:

Mass of sand, m = 85.5 grams

Specific heat capacity of sand, c = 0.1 J/g°C

Change in temperature, ΔT = 30°C - 20°C = 10°C

Plugging these values into the formula, we get:

Q = 85.5 g * 0.1 J/g°C * 10°C

= 85.5 J/°C * 10°C

= 855 J

Therefore, the amount of heat required to raise the temperature of 85.5 grams of sand from 20°C to 30°C is 855 joules.

It's worth noting that the specific heat capacity is the amount of heat energy required to raise the temperature of 1 gram of a substance by 1°C.

In this case, the specific heat capacity of sand is given as 0.1 J/g°C, which means that it takes 0.1 joules of energy to raise the temperature of 1 gram of sand by 1°C. Multiplying this value by the mass of the sand and the change in temperature gives us the total amount of heat energy required.

For more such questions on amount of heat visit;

https://brainly.com/question/30738335

#SPJ8

The kinetic equation for the given reaction is first-order with respect to the reactant, and the rate constant is zero.

To determine the kinetic equation and rate constant for the given data, we need to analyze the relationship between the concentration of the reactant and time.

The general form of a first-order reaction is given by the equation:

Rate = k[A]^n

Where:

Rate is the rate of the reaction

k is the rate constant

[A] is the concentration of the reactant

n is the order of the reaction with respect to the reactant

By analyzing the given data, we can calculate the reaction rate and determine the order of the reaction and the rate constant.

Let's first calculate the reaction rate using the initial and final concentrations and the corresponding time intervals:

Rate = (Change in concentration) / (Change in time)

For the first time interval (0 to 10 min):

Rate = (13.2 kg·m^(-3) - 16.0 kg·m^(-3)) / (10 min - 0 min) = -2.8 kg·m^(-3)·min^(-1)

Similarly, we can calculate the rates for the other time intervals:

10 to 20 min: Rate = (11.1 kg·m^(-3) - 13.2 kg·m^(-3)) / (20 min - 10 min) = -2.1 kg·m^(-3)·min^(-1)

20 to 35 min: Rate = (8.8 kg·m^(-3) - 11.1 kg·m^(-3)) / (35 min - 20 min) = -2.3 kg·m^(-3)·min^(-1)

35 to 50 min: Rate = (7.1 kg·m^(-3) - 8.8 kg·m^(-3)) / (50 min - 35 min) = -1.7 kg·m^(-3)·min^(-1)

By observing the rates for different time intervals, we can see that the rate of change in concentration does not remain constant. This suggests that the reaction is not first-order with respect to the reactant.

To determine the order of the reaction, we can examine how the rate changes with the concentration. Let's calculate the rate ratios for the different time intervals:

Rate ratio (10/0) = (-2.8 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) = 1

Rate ratio (20/10) = (-2.1 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) ≈ 0.75

Rate ratio (35/20) = (-2.3 kg·m^(-3)·min^(-1)) / (-2.1 kg·m^(-3)·min^(-1)) ≈ 1.10

Rate ratio (50/35) = (-1.7 kg·m^(-3)·min^(-1)) / (-2.3 kg·m^(-3)·min^(-1)) ≈ 0.74

By observing the rate ratios, we can see that they are not constant, indicating that the reaction is not a simple integer order (e.g., first-order or second-order). However, we can approximate the order of the reaction by calculating the average rate ratio:

Average rate ratio = (1 + 0.75 + 1.10 + 0.74) / 4 ≈ 0.897

The order of the reaction can be approximated as the exponent that gives this average rate ratio. In this case, the order is approximately 0.897, which we can round to 1. Therefore, the kinetic equation for the reaction is:

Rate = k[A]^1.5

Now, to determine the rate constant (k), we can choose any set of data points and solve for k. Let's use the first data point at time = 0 min:

16.0 kg·m^(-3) = k * (0 min)^1.5

Since (0 min)^1.5 is zero, the right side of the equation is zero. Therefore, k must be zero as well.

For more such questions on kinetic equation visit;

https://brainly.com/question/22855016

#SPJ8

Answer:

To calculate the pH of a buffer solution, we need to know the concentrations of both the acid and its conjugate base (salt). In this case, we are given that the concentration of acid is 10 times the concentration of the salt.

Let's assume the concentration of the salt is "x" (in any suitable unit). Therefore, the concentration of the acid would be 10x.

In a buffer solution, the pH is determined by the ratio of the concentrations of the acid and its conjugate base (salt). We can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

In this equation, pKa is the negative logarithm of the acid dissociation constant (Ka), and [A-] and [HA] are the concentrations of the conjugate base and acid, respectively.

Since the concentration of the acid is 10x and the concentration of the salt is x, we can rewrite the equation as:

pH = pKa + log(x/(10x))

Simplifying further:

pH = pKa + log(1/10)

The log(1/10) is equal to -1, so the equation becomes:

pH = pKa - 1

Without knowing the specific pKa value for the acid-salt pair in the buffer solution, we cannot determine the exact pH. However, if we have the pKa value, we can subtract 1 from it to find the pH of the buffer solution.

Explanation:

b

Allosteric enzymes change shape upon binding an effector molecule, displaying a sigmoidal substrate concentration vs. reaction rate curve. The reaction rate increases until saturation, characterized by the enzyme's Km.

For more questions on Allosteric enzymes

https://brainly.com/question/29548129

#SPJ8

Answer:

HI is the formula of hydroiodic acid

Explanation:

hope it helps you

Diffusion and convection are two distinct processes that play a role in the dispersal of air pollution, but they differ in how they transport pollutants and their impact on dispersion.

Diffusion refers to the spontaneous movement of particles from an area of higher concentration to an area of lower concentration. It occurs due to random thermal motion of molecules. In the context of air pollution, diffusion allows pollutants to spread out gradually, dispersing them in various directions. However, diffusion alone is a relatively slow process, particularly for large-scale dispersion, and it may not be effective in rapidly distributing pollutants over long distances.

Convection, on the other hand, involves the transfer of heat energy through the movement of a fluid, such as air or water. In the atmosphere, convection occurs as warm air rises, creating upward currents and transporting pollutants vertically. As the air rises, it carries pollutants to higher altitudes, which can lead to their dispersion over larger areas. Convection is a more efficient process for the vertical transport and dispersion of pollutants compared to diffusion.

The impact of diffusion and convection on the dispersal of air pollution can vary. Diffusion primarily affects local dispersion, allowing pollutants to spread out in the immediate vicinity of emission sources. It is more significant in areas with minimal air movement. Convection, on the other hand, can facilitate the long-range transport of pollutants, particularly when large-scale weather systems are involved. Convection can carry pollutants over greater distances and contribute to regional or even global dispersion, depending on weather patterns.

In summary, diffusion and convection are both involved in the dispersal of air pollution, but they differ in the mechanisms of transport and the scale of dispersion. Diffusion leads to gradual spreading of pollutants locally, while convection enables vertical transport and dispersion over larger areas, including long-range transport depending on weather conditions. Understanding the interplay between these processes is crucial for assessing the extent and impact of air pollution.

For more question on Diffusion

https://brainly.com/question/94094

#SPJ8

The best way to measure the pH of a natural solution while out in a forest is to use a portable pH meter or pH test strips specifically designed for field use. These instruments provide accurate and reliable pH measurements and are convenient for outdoor applications.

1. Prepare the necessary equipment: Before heading out to the forest, gather the required tools. You will need a portable pH meter or pH test strips, as well as the necessary reagents or calibration solutions if using a pH meter.

2. Collect the sample: Locate the natural solution you want to measure the pH of, such as a stream, pond, or soil. Use a clean container to collect a representative sample of the solution.

3. Calibrate the pH meter (if applicable): If you are using a portable pH meter, it is essential to calibrate it before taking measurements. Follow the manufacturer's instructions to calibrate the meter using the provided calibration solutions.

4. Conduct the measurement: For pH meters, immerse the electrode into the collected sample. Allow some time for the reading to stabilize, and then record the pH value indicated on the meter's display.

5. Using pH test strips: If you are using pH test strips, dip the strip into the collected sample for the recommended amount of time. Remove the strip and compare the color change with the provided color chart. Determine the corresponding pH value from the chart.

6. Repeat for accuracy: To ensure reliability, repeat the measurement process at least once and compare the results. This step helps confirm the accuracy of your measurements.

7. Record and analyze the data: Note down the pH values obtained and any relevant observations. Analyze the data as needed for your research or monitoring purposes.

By following these steps and using the appropriate equipment, you can effectively measure the pH of a natural solution while in a forest setting.

For more such questions on measurements, click on:

https://brainly.com/question/28391278

#SPJ8

Answer:

nucleus

Explanation:

During protein synthesis, the transcription of mRNA takes place in the cell's nucleus.

The structural formula for 6-Ethyl-4,7-dimethyl-non-1-ene can be represented as follows:

[tex]CH_{3} CH_{3} CH_{3}[/tex]

| | |

[tex]CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{3}[/tex]

| | | | | | |

[tex]CH CH CH CH CH CH CH[/tex]

|

[tex]CH_{2}[/tex]

In this structural formula, the main chain contains nine carbon atoms (non-1-ene) with a double bond (ene) located at the first carbon atom. Starting from the first carbon atom, we have:

At the sixth carbon atom, there is an ethyl group (CH3CH2-), which means an ethyl group is attached to it.

At the fourth and seventh carbon atoms, there are methyl groups (CH3-), which means a methyl group is attached to each of them.

The remaining carbon atoms in the main chain have a single hydrogen atom (H) attached to them.

This structural formula represents the arrangement of atoms and bonds in the molecule and provides information about the connectivity of the atoms in the compound. It helps visualize the spatial arrangement of the atoms and functional groups, enabling a better understanding of the compound's chemical properties and reactions.

Know more about structural formula here:

https://brainly.com/question/31115811

#SPJ8

Answer:

985.2 moles of nitrogen can produce 1970.4 moles of ammonia.

Explanation:

The balanced chemical equation for the production of ammonia from nitrogen is:

N2 + 3H2 → 2NH3

From the balanced equation, we can see that 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia.

So, to determine how many moles of ammonia can be produced from 985.2 moles of nitrogen, we need to use the mole ratio from the balanced chemical equation as follows:

985.2 moles N2 x (2 moles NH3 / 1 mole N2) = 1970.4 moles NH3

Therefore, 985.2 moles of nitrogen can produce 1970.4 moles of ammonia.

The answer responses to  the structures shown in the diagram are:

A. chromosomes

C. They would be the same.

B. They are in pairs because each one comes from a different parent.

The chromosomes are in pairs because humans have a diploid number of chromosomes, meaning they have two sets of chromosomes, one inherited from each parent.

The nucleus is important in eukaryotic cells and has many important parts that help the cell work properly. There are some parts inside cells called the nuclear membrane, nucleoplasm, nucleolus, and chromatin. Chromatin is made up of DNA and other proteins.

Every part of a person's body has the same genes, but the way they are organized can be different in different types of cells. The chromosomes in our skin cells might not be the same as the chromosomes in our muscle cells, even if they come from the same person.

Learn more about  nucleus from

https://brainly.com/question/9376695

#SPJ1

Identify the structures shown.

A. chromosomes

B. mitochondria

C. nuclei

D. vacuoles

C

Describe how the structures from this cell would compare to the structures in the nucleus of another body cell from the same person.

A. There would be longer.

B. They would be shorter.

C. They would be the same.

D. They would be different.

Describe how the structures from this cell would compare to the structures in the nucleus of another body cell from the same person.

A. There would be longer.

B. They would be shorter.

C. They would be the same.

D. They would be different.

Explain why the structures are in pairs.

A. They aren't in pairs.

B. They are in pairs because each one comes from a different parent.

C. This cell is making a copy of itself.

D. The cell always has 2 copies in case 1 is damaged.

The value of Kp for the given reaction at equilibrium is approximately 192,986.689 L atm mol⁻¹.

To calculate the equilibrium constant Kp for the given reaction, we can use the relationship between Kc and Kp, which is expressed as:

Kp = Kc * (RT)^Δn

Where:

- Kp is the equilibrium constant in terms of partial pressures.

- Kc is the equilibrium constant in terms of concentrations.

- R is the ideal gas constant (0.08206 L atm K⁻¹ mol⁻¹).

- T is the temperature in Kelvin.

- Δn is the change in the number of moles of gas (sum of products - sum of reactants).

In this case, the reaction involves four moles of gas on the left-hand side (reactants) and five moles of gas on the right-hand side (products). Therefore, Δn = 5 - 4 = 1.

Given that Kc = 2367 at 999 K, we can substitute these values into the equation:

Kp = 2367 * (0.08206 L atm K⁻¹ mol⁻¹ * 999 K)^1

Simplifying the expression:

Kp = 2367 * (81.367 L atm mol⁻¹)

Calculating the product:

Kp ≈ 192,986.689 L atm mol⁻¹

Therefore, the value of Kp for the given reaction at equilibrium is approximately 192,986.689 L atm mol⁻¹.

For more questions on equilibrium, click on:

https://brainly.com/question/517289

#SPJ8

Answer:

To find the volume of the thallium, we can use the formula:

density = mass/volume

Rearranging this formula, we get:

volume = mass/density

Plugging in the given values, we get:

Volume = 3.85g / 11.9 cm^-3

Using a calculator, we can solve for the volume:

Volume = 0.3235 cm^3

Therefore, the volume of the thallium is 0.3235 cm^3.

Explanation:

Batteries have potential energy in their chemical energy stores.

The one word that completes the sentence is "chemical." Batteries store potential energy in the form of chemical energy. This means that the energy is stored within the chemical components of the battery.
Here's a step-by-step explanation:
1. Batteries are devices that convert chemical energy into electrical energy.
2. Chemical energy is the energy stored within the chemical bonds of a substance.
3. In the case of batteries, this chemical energy is stored in the chemical components of the battery, such as the electrolyte and the electrodes.
4. When a battery is connected to a circuit, a chemical reaction takes place within the battery, causing the stored chemical energy to be converted into electrical energy.
5. This electrical energy can then be used to power electronic devices or perform other tasks.
To summarize, batteries store potential energy in their chemical energy stores. This potential energy is converted into electrical energy when the battery is used.

For more such questions on potential energy

https://brainly.com/question/13997830

#SPJ8

Temperature of the gas is approximately 570.4 K when there are 1.9 moles of gas at a pressure of 5 ATM and a volume of 5.0 × [tex]10^{4}[/tex] mL.

To determine the temperature of the gas, we can use the ideal gas law equation, which states that the pressure of a gas is directly proportional to its temperature, volume, and the number of moles of gas. The equation is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In this case, we are given the pressure (P = 5 ATM), volume (V = 5.0 × 10^4 mL), and number of moles (n = 1.9 moles) of the gas. We can rearrange the ideal gas law equation to solve for temperature:

T = PV / (nR)

Substituting the given values and the value of the ideal gas constant (R = 0.0821 L·atm/(mol·K)), we can calculate the temperature:

T = (5 ATM) × (5.0 × [tex]10^{4}[/tex] mL) / (1.9 moles × 0.0821 L·atm/(mol·K))

After performing the calculations, we find that the temperature of the gas is approximately 570.4 K.

Know more about ideal gas law here:

https://brainly.com/question/27870704

#SPJ8

The ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.

When [tex]hydrated copper(II) sulfate[/tex] [tex](CuSO_ {4} .H_{4} O)[/tex] is heated, the purpose of the ice is to provide a cooling effect during the process. The hydrated copper(II) sulfate contains water molecules (H2O) that are chemically bonded to the copper sulfate compound. The formula [tex]CuSO_{4} .H_{2} O[/tex] indicates that there are x moles of water molecules per mole of copper(II) sulfate.

As the [tex]hydrated copper(II) sulfate[/tex] is heated, the heat energy causes the water molecules to undergo a physical change and turn into steam. This process is known as dehydration. The water molecules break their chemical bonds with the copper sulfate compound and are released in the form of steam.

The presence of ice during the heating process helps maintain a lower temperature in the reaction vessel. The ice absorbs the heat energy from the surroundings, allowing for a controlled and gradual increase in temperature. This controlled heating prevents sudden temperature changes and potential hazards, such as splattering or overheating.

In summary, the ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.

For more questions on dehydration, click on:

https://brainly.com/question/1301665

#SPJ8

To express 102,455 m in different units: 102,455,000,000 nm, 0.102455 Mm, and 10,245,500 cm.

To express the quantity 102,455 m in each unit:

https://brainly.com/question/32030244

#SPJ2

Answer:

To calculate the frequency of a photon with energy of 5.27 × 10⁻¹⁹ J, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant (6.626 × 10⁻³⁴ J • s), and f is the frequency of the photon. Solving for f, we get:

f = E/h = (5.27 × 10⁻¹⁹ J)/(6.626 × 10⁻³⁴ J • s) = 7.95 × 10¹⁴ Hz

Therefore, the frequency of the photon is 7.95 × 10¹⁴ Hz.

Explanation:

The molar mass of ZnI2 is approximately 319.18 grams per mole.

To determine the molar mass of ZnI2 (zinc iodide), we need to know the atomic masses of zinc (Zn) and iodine (I) and their respective subscripts in the chemical formula.

The atomic mass of zinc (Zn) is approximately 65.38 grams per mole (g/mol), as found on the periodic table. The atomic mass of iodine (I) is approximately 126.90 g/mol.

Since the chemical formula of zinc iodide is ZnI2, it means there are two iodine atoms for every one zinc atom. Therefore, we multiply the atomic mass of iodine by 2.

Molar mass of ZnI2 = (atomic mass of Zn) + 2 × (atomic mass of I)

                 = 65.38 g/mol + 2 × 126.90 g/mol

                 = 65.38 g/mol + 253.80 g/mol

                 = 319.18 g/mol

Hence, the molar mass of ZnI2 is approximately 319.18 grams per mole.

For more questions on molar mass, click on:

https://brainly.com/question/837939

#SPJ8

The wavelength of 1212.7 Å corresponds to an electronic transition from n=1 to n=2, while the wavelength of 6562.8 Å does not have enough information to determine the value of n.

In atomic spectra, the wavelength of spectral lines corresponds to specific electronic transitions within an atom. Each line is associated with a particular energy level transition, which is characterized by the principal quantum number (n) of the electronic orbitals involved.

Let's analyze the given wavelengths:

Wavelength of 1212.7 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. We need to find the values of n for this transition.

We know that the Balmer series in the hydrogen atom is defined by transitions from higher energy levels to the n=2 level. Therefore, the wavelength of 1212.7 Å corresponds to an electronic transition within the Balmer series. From the Balmer series formula,

1/λ = R_H * [tex](1/2^2 - 1/n^2[/tex]), where R_H is the Rydberg constant for hydrogen, we can solve for n. Rearranging the formula, we get:

1/λ = R_H * (1/4 - 1/[tex]n^2[/tex])

1/λ = R_H/n^2 - R_H/4

1/λ + R_H/4 = R_H[tex]/n^2[/tex]

1/λ + 109677 cm^-1 = 109677 cm^-1/n^2

Substituting the value of the wavelength (1212.7 Å = 121270 nm = 12127000 Å) into the equation, we can solve for n:

1/12127000 + 109677 cm^-1 = 109677 cm^-1/n^2

[tex]n^2[/tex] = 109677 cm^-1 / (1/12127000 + 109677 cm^-1)

[tex]n^2[/tex]≈ 109677 cm^-1 / 109678 cm^-1

n ≈ sqrt(1) ≈ 1

Therefore, the electronic transition corresponding to the wavelength of 1212.7 Å is from n=1 to n=2.

Wavelength of 6562.8 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. To determine the value of n for this transition, we can use a similar approach as before. However, since the wavelength is not specified further, we cannot determine the exact series or atom.

Different atoms or series can have transitions that produce the same wavelength. Without additional information, we cannot pinpoint the specific value of n for this wavelength.

For more such questions on wavelength visit:

https://brainly.com/question/28995449

#SPJ8

It should be noted that at 298 K, the cell potential (E°cell) of the given concentration cell is 0 V.

E°cell = E°cathode - E°anode

Given that E°Cu2+/Cu = +0.34 V, the reduction half-reaction occurring at the cathode is:

Cu2+(aq) + 2e- -> Cu(s)

And the oxidation half-reaction occurring at the anode is:

Cu(s) -> Cu2+(aq) + 2e-

Since the concentrations of Cu2+ on both sides of the cell are different, this is a concentration cell. The concentration gradient will drive the cell to reach equilibrium.

Now, let's calculate the E°cell:

E°cell = E°cathode - E°anode

= (+0.34 V) - (+0.34 V)

= 0 V

Therefore, at 298 K, the cell potential (E°cell) of the given concentration cell is 0 V.

Learn more about cell on

https://brainly.com/question/3717876

#SPJ1

I understand that you're looking for clarification on the balanced chemical equation and the concept of impurities. Let's break it down.

1. Balanced chemical equation:

The given balanced equation is:

6Fe2+ + Cr2O72- + 14H+ → 6Fe3+ + 2Cr3+ + 7H2O

To understand why there are 6 moles of Fe2+, you need to recognize that the coefficients in a balanced chemical equation represent the stoichiometric ratios between reactants and products. In this redox reaction, the Fe2+ ions are being oxidized to Fe3+ ions, and the Cr2O72- ions are being reduced to Cr3+ ions. The balanced equation is derived through balancing the charges and atoms on both sides of the equation, ensuring that the number of electrons transferred in the redox process is equal.

2. Impure sample X:

The problem states that the sample X is an impure sample of FeSO4.7H2O. This means that the sample contains FeSO4.7H2O as well as other substances (impurities) which do not participate in the reaction. These impurities do not affect the stoichiometry of the reaction but may contribute to the mass of the sample. The goal of the problem is to determine the mass of FeSO4.7H2O in the sample, disregarding the impurities.

Now, let's carry out the calculations to find the mass of FeSO4.7H2O in the sample X:

1. From the balanced equation, we know that 6 moles of Fe2+ react with 1 mole of Cr2O72-.

2. Calculate the moles of Cr2O72- used in the reaction from the volume and concentration of K2Cr2O7 solution:

Moles of Cr2O72- = Volume (dm^3) × Concentration (mol/dm^3)

Moles of Cr2O72- = 0.0213 dm^3 × 0.0150 mol/dm^3 = 3.195 × 10^-4 mol

3. Calculate the moles of Fe2+ in the 25.0 cm^3 aliquot of the 250 cm^3 FeSO4 solution:

Moles of Fe2+ = 6 × Moles of Cr2O72-

Moles of Fe2+ = 6 × 3.195 × 10^-4 mol = 1.917 × 10^-3 mol

4. Calculate the moles of Fe2+ in the entire 250 cm^3 FeSO4 solution:

1.917 × 10^-3 mol (in 25.0 cm^3) × (250 cm^3 / 25.0 cm^3) = 0.01917 mol

5. Calculate the mass of FeSO4.7H2O in the sample X:

Mass = Moles × Molar mass

Mass = 0.01917 mol × (151.91 + 7 × 18.015) g/mol = 0.01917 mol × 278.015 g/mol = 5.33 g (approximately)

Thus, the mass of FeSO4.7H2O in the impure sample X is approximately 5.33 g.

Raising the temperature enhances the reaction rate by increasing the kinetic energy of the enzyme and substrate molecules.

An enzyme, a biological catalyst, plays a crucial role in accelerating the pace of chemical reactions. Enzymes, predominantly composed of proteins, possess remarkable specificity in the reactions they catalyze.

This specificity arises from the structural configuration of the enzyme, which complements the shape of the substrate—the specific molecule subjected to enzymatic catalysis.

Learn about enzymes here https://brainly.com/question/14577353
#SPJ1

The experimental energy in J and the n initial and n final by applying the equation in [tex]E= -4.21 * 10^{-19} J[/tex]

The given formula is[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2[/tex]

The formula to calculate the energy of a photon is given by:E= hc / λwhere:E = energy of a photonh = Planck's constantc = speed of lightλ = wavelength of the photon.

Given values are:

λ = 671 nmh = [tex]6.626 * 10-^{34}J.sc = 3.0 * 10^8 m/s[/tex]

By using the formulaE= hc / λE

= [tex]6.626 * 10^{-34} J.s * 3.0 * 10^{8} m/s / (671 * 10^{-9} m)E[/tex]

= [tex]2.96 * 10^{-19[/tex]J

Now, the energy of a photon in joules is found to be 2.96 × 10^-19 J. We will now find the n final and n initial. We need to find out the principle quantum numbers of n initial and n final. Let us apply the Rydberg formula to find out n initial and n final.

We know that:

λ = [tex]R [1/n^2final - 1/n^2initial][/tex]where:λ = 671 nm

n final  = ?n initial  = ?R = Rydberg constantR = [tex]1.097 * 10^7 m^{-1[/tex]

By substituting the given values, we get:

671 nm =[tex](1.097 * 107 m-1) [1/n^2final - 1/n^2initial][/tex]

On solving this, we get:n initial = 2n final = 1

By substituting the obtained values in the energy formula, we get:

[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2E=-2.18*10^-18J(1/1^2 - 1/2^2)(3^2)[/tex]

[tex]E= -4.21 * 10^{-19} J[/tex]

Know more about  wavelength   here:

https://brainly.com/question/28995449

#SPJ8