The following statement is true. Momentum is conserved for a system of objects when the internal forces cancel out due to Newton's Third Law, and the forces external to the system are zero or conservative.
In order for momentum to be conserved in a system of objects, two conditions must be satisfied. First, the internal forces within the system must cancel out due to Newton's Third Law. This means that for every action force, there is an equal and opposite reaction force within the system, resulting in a net force of zero on the system as a whole.
Second, the external forces acting on the system must either be zero or conservative. If the external forces are zero, there is no external influence on the system's momentum. If the external forces are conservative, they can be accounted for in terms of potential energy, and their effects on momentum can be accounted for through the principle of conservation of mechanical energy.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A force of 1.050×10 3
N pushes a man on a bicycle forward. Air resistance pushes against him with a force of 785 N. If he starts from rest and is on a level road, what speed v will he be going after 40.0 m ? The mass of the bicyclist and his bicycle is 90.0 kg. v=[ An unfortunate astronaut loses his grip during a spacewalk and finds himself floating away from the space station, carrying only a rope and a bag of tools. First he tries to throw a rope to his fellow astronaut, but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of m a
=113 kg and the bag of tools has a mass of m b
=10.0 kg. If the astronaut is moving away from the space station at v i
=1.80 m/s initially, what is the minimum final speed v b,f
of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever?
The minimum final speed of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever is 20.34 m/s for the forces.
Question 1In the given problem, a man on a bicycle is pushed forward by a force of 1.050 × 10³ N. Air resistance pushes against him with a forces of 785 N. It is given that he starts from rest and is on a level road, and we are to find the speed v he will be going after 40.0 m. The mass of the bicyclist and his bicycle is 90.0 kg.Using Newton's Second Law, we can calculate the net force acting on the man:Net force = F - fwhere F = force pushing the man forwardf = force of air resistanceNet force =[tex](1.050 * 10^3)[/tex] - 785 = [tex]2.65 * 10^2 N[/tex]
Using Newton's Second Law again, we can calculate the acceleration of the man on the bicycle:a = Fnet / ma = (2.65 × [tex]10^2[/tex]) / 90 = 2.94 m/[tex]s^2[/tex]
Now, using one of the kinematic equations, we can find the speed of the man on the bicycle after 40.0 m:v² = v₀² + 2aswhere v₀ = 0 (initial speed) and s = 40 m (distance traveled)
[tex]v^2[/tex] = 0 + 2(2.94)(40) = 235.2v = [tex]\sqrt{232.5}[/tex]= 15.34 m/s
Therefore, the speed the man on the bicycle will be going after 40.0 m is 15.34 m/s.Question 2In the given problem, an astronaut is floating away from a space station, carrying only a rope and a bag of tools. The astronaut tries to throw the rope to his fellow astronaut but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of ma = 113 kg and the bag of tools has a mass of mb = 10.0 kg.
If the astronaut is moving away from the space station at vi = 1.80 m/s initially, we are to find the minimum final speed vb,f of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever.Using the Law of Conservation of Momentum, we can write:mavi + mbvbi = mava + mbvbafter the astronaut throws the bag of tools, there is no external force acting on the system. Therefore, momentum is conserved. At the start, the momentum of the system is:ma × vi + mb × 0 = (ma + mb) × vafter the bag of tools is thrown, the astronaut and the bag will move in opposite directions with different speeds.
Let the speed of the bag be vb and the speed of the astronaut be va. The momentum of the system after the bag of tools is thrown is:ma × va + mb × vbNow, equating the two equations above, we get:ma × vi = (ma + mb) × va + mb × vbRearranging, we get:vb = (ma × vi - (ma + mb) × va) / mbSubstituting the given values, we get:vb = (113 × 1.80 - (113 + 10) × 0) / 10vb = 20.34 m/s
Therefore, the minimum final speed of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever is 20.34 m/s.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
Ultra violet wavelengths that cause sun burns often have a wavelength of approximately 220 nm. What is the frequency of one of these waves? O 7.3 x 10^-16 Hz O1.4 x 10^15 Hz O 66 Hz O9.0 x 10^9 Hz
The frequency of an ultraviolet wave with can be calculated using the equation v = c/λ, the frequency of the ultraviolet wave is approximately 1.36 x 10^15 Hz, which corresponds to the answer option: 1.4 x 10^15 Hz.
The frequency of a wave can be calculated using the formula:
f = c / λ,
where f is the frequency, c is the speed of light, and λ is the wavelength.
Substituting the given wavelength of 220 nm (220 x 10^-9 m) into the equation, and using the speed of light c = 3 x 10^8 m/s, we have:
f = (3 x 10^8 m/s) / (220 x 10^-9 m) = 1.36 x 10^15 Hz.
Therefore, the frequency of a UV wave with a wavelength of 220 nm is approximately 1.36 x 10^15 Hz.
Learn more about frequency here;
https://brainly.com/question/254161
#SPJ11
Explain type 1 and type 1a relay node in LTE-A?
In the context of LTE-A (Long-Term Evolution Advanced), Type 1 and Type 1a relay nodes are different deployment options for relay nodes in the LTE network. Relay nodes are used to extend the coverage and improve the performance of the network by relaying signals between the base station and user equipment (UE).
Type 1 Relay Node:
A Type 1 relay node in LTE-A operates in half-duplex mode, which means it can either transmit or receive data at a given time but not both simultaneously. It has two separate sets of antennas: one for receiving signals from the base station (downlink) and another for transmitting signals to the UE (uplink). This type of relay node introduces a relay-specific interface called the Relay Physical Interface (R-PHY) to connect with the base station.
The Type 1 relay node receives downlink signals from the base station, decodes them, and then re-encodes and retransmits them to the UE. Conversely, it receives uplink signals from the UE, decodes them, and re-encodes and retransmits them to the base station. Due to the half-duplex operation, it cannot receive and transmit simultaneously, which can result in increased latency and reduced throughput compared to other relay types.
Type 1a Relay Node:
A Type 1a relay node is an enhanced version of the Type 1 relay node, specifically designed to improve performance. It operates in full-duplex mode, allowing simultaneous transmission and reception. It achieves this by utilizing advanced self-interference cancellation techniques, which cancel out the interference caused by the transmitted signal, allowing the relay to receive signals while transmitting.
The Type 1a relay node also utilizes the Relay Physical Interface (R-PHY) to communicate with the base station. By supporting full-duplex operation, it can provide better throughput and lower latency compared to the Type 1 relay node. This makes it more suitable for scenarios where higher data rates and improved performance are desired.
Both Type 1 and Type 1a relay nodes can be deployed in LTE-A networks to extend coverage and improve performance in areas with challenging propagation conditions or limited backhaul connectivity. The choice between the two types depends on the specific requirements of the network deployment and the desired trade-offs between performance and complexity/cost.
#spj11
Learn more about LTE-A: https://brainly.com/question/30868989
An experimental jet rocket travels around Earth along its equator just above its surface. At what speed must the jet travel if the magnitude of its acceleration is 2g? Assume the Earth's radius is 6.370 × 10⁶ m. v = ___ m/s
An experimental jet rocket travels around the Earth along its equator just above its surface. The magnitude of acceleration of the jet is 2g. We have to determine the speed of the jet rocket.
Assuming the radius of the Earth to be 6.370 × 10⁶ m, the acceleration due to gravity is given by
g = GM/R² where G is the gravitational constant, M is the mass of the Earth, and R is the radius of the Earth.
The formula for centripetal acceleration is given by:
ac = v²/R Where v is the speed of the jet rocket. We can calculate the speed of the rocket by equating these two expressions:
2g = v²/Rac = v²/R
Rearranging the equation, we get: v² = 2gR
So, the speed of the jet rocket is: v = √(2gR)
Putting in the values, we get: v = √(2×9.8 m/s² × 6.370 × 10⁶ m)v = √(124597600) ≈ 11150.25 m/s
Thus, the speed of the jet rocket is approximately 11150.25 m/s.
Check out this answer: https://brainly.com/question/460763
#SPJ11
A 17.5-cm-diameter loop of wire is initially oriented perpendicular to a 1.5-T magnetic field. The loop is rotated so that its plane is parallel to the field direction in 0.29 S. What is the average induced emf in the loop?
A 17.5-cm-diameter loop of wire is initially oriented perpendicular to a 1.5-T magnetic field. Therefore, the average induced emf in the loop is 0.125 V.
The average induced emf in the loop can be found out as follows: Formula used: Average induced emf = (BAN)/t
Where, B = Magnetic Field, A = Area of the loop, N = Number of turns of wire, t = time required to rotate the loop (or time in which the magnetic flux changes)
Given that, Diameter of the loop = 17.5 cm, Radius of the loop = r = Diameter / 2 = 17.5 / 2 cm = 8.75 cm = 0.0875 m, Magnetic field strength = B = 1.5 T, Time required to rotate the loop = t = 0.29 s.
Now, we need to find the area of the loop and number of turns of wire.
Area of the loop = πr² = 3.14 × (0.0875 m)² = 0.024 m²
Number of turns of wire = 1 (as only one loop is given)Now, we can substitute these values in the formula of average induced emf to calculate the answer.
Average induced emf = (BAN)/t= (1.5) × (0.024) × (1) / (0.29)= 0.125 V
Therefore, the average induced emf in the loop is 0.125 V.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A ray of light indexes on a smooth surface and makes an angle of 10° with the surface.
What is the angle of incidence?
a) 10° b) 20° c) 50° d) 40° e) 80°
The angle of incidence in this scenario is 10°.The angle of incidence is the angle between the incident ray (the incoming ray of light) and the normal to the surface it strikes.
In this case, the problem states that the ray of light indexes on a smooth surface and makes an angle of 10° with the surface. Since the angle of incidence is defined as the angle between the incident ray and the normal, and the surface is smooth (presumably meaning it is flat), the normal to the surface would be perpendicular to the surface.
Therefore, the angle of incidence is equal to the angle that the incident ray makes with the surface, which is given as 10°. Hence, the correct answer is option a) 10°.
Learn more about angles of incidence here:
https://brainly.com/question/14221826
#SPJ11
A thin layer of Benzene (n=1.501) floats on top of Glycerin (n=1.473). A light beam of wavelegnth 450 nm (in air) shines nearly perpendicularly on the surface Air n=1.00 of Benzene. If Part A - If we want the reflected light to have constructive interference, among all the non-zero thicknesses of the Benzene layer that meet the the requirement, what is the 2 nd minimum thickness? The wavelength of the light in air is 450 nm nanometers. Grading about using Hints: (1) In a hint if you make ONLY ONE attempt, even if it is wrong. you DON"T lose part credtit. (2) IN a hint if you make 2 attmepts and both are wrong. ot if you "request answer", you lost partial credit. Express your answer In nanometers. Keep 1 digit after the decimal point. - Part B - If we want the reflected light to have destructive interierence, among all the non-zero thicknesses of the Benzene layer that meet the the requirement, what is the minimum thickness? The wavolength of the light in air is 450 nm nanometers. Express your answer in nanometers. Keep 1 digit after the decimal point.
A)For constructive interference of the reflected light, the 2nd minimum thickness of the Benzene layer is approximately 209.7 nm.
B)For destructive interference, the minimum thickness of the Benzene layer is approximately 139.8 nm.
For constructive interference of the reflected light, the path difference between the light reflected from the top surface of the Benzene layer and the light reflected from the Benzene-Glycerin interface should be equal to an integer multiple of the wavelength in the medium.
Mathematically, this can be expressed as:
[tex]\[ 2t_1 = m \lambda_1 \][/tex]
where [tex]\( t_1 \)[/tex] is the thickness of the Benzene layer, m is an integer representing the order of interference, and [tex]\( \lambda_1 \)[/tex] is the wavelength of light in Benzene.
Given that the refractive index of Benzene is 1.501, we can calculate the wavelength of light in Benzene using the equation:
[tex]\[ \lambda_1 = \frac{\lambda_0}{n_1} \][/tex]
where [tex]\( \lambda_0 \)[/tex] is the wavelength of light in air and [tex]\( n_1 \)[/tex] is the refractive index of Benzene.
Substituting the given values, we find [tex]\( \lambda_1 = \frac{450}{1.501} \)[/tex] nm.
To find the 2nd minimum thickness, we consider \( m = 2 \). Rearranging the equation for constructive interference, we have:
[tex]\[ t_1 = \frac{m \lambda_1}{2} = \frac{2 \cdot \frac{450}{1.501}}{2} \) nm.[/tex]
Simplifying, we get [tex]\( t_1 \approx 209.7 \) nm.[/tex]
For destructive interference, the path difference should be equal to an odd multiple of half the wavelength. Using a similar approach, we can find that the minimum thickness is approximately 139.8 nm.
Therefore, the 2nd minimum thickness for constructive interference is 209.7 nm, and the minimum thickness for destructive interference is 139.8 nm.
Learn more about constructive interference here:
https://brainly.com/question/31228426
#SPJ11
A simple series circuit consists of a 190 Ω resistor, a 28.0 V battery, a switch, and a 1.70 pF parallel-plate capacitor (initially uncharged) with plates 5.0 mm apart. The switch is closed at t =0s . Find the displacement current at t =0.50ns .
A simple series circuit consists of a 190 Ω resistor, a 28.0 V battery, a switch, and a 1.70 pF parallel-plate capacitor the displacement current at t = 0.50 ns will be zero since there is no change in electric flux through the capacitor plates.
To find the displacement current at t = 0.50 ns in the given circuit, we need to determine the rate of change of electric flux through the capacitor plates.
The displacement current (Id) can be calculated using the formula: Id = ε₀ × (dΦE / dt), where ε₀ is the permittivity of free space, dΦE/dt is the rate of change of electric flux through the capacitor.
In this case, the capacitor is initially uncharged, so there is no electric field (E) between the plates. Therefore, the electric flux through the capacitor is initially zero, and its rate of change is also zero.
Since the switch is closed at t = 0s, it will take some time for the capacitor to charge up and establish an electric field between its plates. At t = 0.50 ns, the capacitor is still in the process of charging, and the electric field has not fully developed.
As a result, the displacement current at t = 0.50 ns will be zero since there is no change in electric flux through the capacitor plates. Once the capacitor is fully charged and the electric field is established, the displacement current will start to flow, but at t = 0.50 ns, it is still not present.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
When a 2.20−kg object is hung vertically on a certain light spring described by Hooke's law, the spring stretches 2.66 cm. (a) What is the force constant of the spring? N/m (b) If the 2.20−kg object is removed, how far will the spring stretch if a 1.10-kg block is hung on it? cm (c) How much work must an external agent do to stretch the same spring 7.00 cm from its unstretched position? J A block of mass 2.60 kg is placed against a horizontal spring of constant k=755 N/m and pushed so the spring compresses by 0.0750 m (a) What is the elastic potential energy of the block-spring system (in J)? 3 (b) If the block is now released and the surface is frictionless, calculate the block's speed (in m/s ) after leaving the spring. m/s
The force constant of the spring is approximately 80.45 N/m, the spring will stretch approximately 0.1349 m (13.49 cm), the external agent must do approximately 1.739 J of work to stretch the spring, the elastic potential energy to be approximately 2.678 J and the speed of the block after leaving the spring to be approximately 0.618 m/s.
(a) The force constant of the spring can be calculated using Hooke's law, which states that the force exerted by a spring is directly proportional to its displacement. The formula for the force exerted by a spring is given by
[tex]F = k * x[/tex]
, where F is the force, k is the force constant (spring constant), and x is the displacement. Given that the spring stretches 2.66 cm (0.0266 m) when a 2.20 kg object is hung on it, we can rearrange the formula to solve for the force constant:
[tex]k = F / x = (m * g) / x = (2.20 kg * 9.8 m/s^2) / 0.0266 m[/tex]
(b) If the 2.20 kg object is removed and a 1.10 kg block is hung on the spring, we can use Hooke's law to find the spring's stretch. The force exerted by the spring is equal to the weight of the block:
[tex]F = m * g = 1.10 kg * 9.8 m/s^2[/tex]
Using the formula F = k * x and rearranging it to solve for x, we have:
[tex]x = F / k = (1.10 kg * 9.8 m/s^2) / 80.45 N/m[/tex]
(c) To find the work required to stretch the spring by 7.00 cm (0.07 m), we use the formula for work:
[tex]W = (1/2) * k * x^2[/tex]
Plugging in the values, we have:
[tex]W = (1/2) * 80.45 N/m * (0.07 m)^2[/tex]
(d) The elastic potential energy of the block-spring system can be calculated using the formula:
[tex]PE = (1/2) * k * x^2[/tex]
Plugging in the values, we have:
[tex]PE = (1/2) * 755 N/m * (0.0750 m)^2[/tex]
(e) After leaving the spring, the block's speed can be determined using the conservation of mechanical energy. Since the surface is frictionless, the initial potential energy stored in the spring is converted entirely into the kinetic energy of the block:
[tex]PE = KE(1/2) * k * x^2 = (1/2) * m * v^2[/tex]
Simplifying and solving for v, we have:
[tex]v = sqrt((k * x^2) / m)v = sqrt((755 N/m * 0.0750 m)^2 / 2.60 kg)[/tex]
To learn more about force constant
brainly.com/question/29598403
#SPJ11
What is the max. speed with which q 1200 kg ear can round a turn of radius 90.0m in a flat road The coefficient of friction between fires and road is 0.6s? Is this result independout of the mass of the can?
The maximum speed of the car is 32,944 m/s, which is independent of the mass of the car, as long as the mass of the car remains constant and the coefficient of friction remains the same.
The maximum speed of a car with a mass of 1200 kg rounding a turn of radius 90 m in a flat road can be calculated using the following formula:
v = [tex]\sqrt{(r * a)[/tex]
where v is the maximum speed, r is the radius of the turn, and a is the acceleration of the car.
First, we need to find the acceleration of the car:
a = [tex]v^2[/tex] / r
a = ([tex]\sqrt{(r^2 * 90^2) * 230[/tex]) / r
a = 26,000 m/[tex]s^2[/tex]
Next, we can use the mass of the car to find the force acting on the car:
F = ma
F = 1200 kg * 26,000 m/[tex]s^2[/tex]
= 3,120,000 N
Finally, we can use the formula for centripetal acceleration to find the maximum speed of the car:
[tex]a_c[/tex] = [tex]v^2[/tex] / r
[tex]a_c[/tex] = ([tex]\sqrt{(r^2 * 90^2) * 230^2[/tex]) / [tex]r^2[/tex]
[tex]a_c[/tex] = 1,810,200 m/[tex]s^2[/tex]
So the maximum speed of the car is:
v = [tex]\sqrt{(r * a_c)[/tex]
= [tex]\sqrt\\90^2 * 1,810,200 m/s^2)[/tex]
= 32,944 m/s
Therefore, the maximum speed of the car is 32,944 m/s.
This result is independent of the mass of the car, as long as the mass of the car remains constant and the coefficient of friction remains the same.
Learn more about speed
https://brainly.com/question/13943409
#SPJ11
If mass A and B are both 2.5 kg, mass A is 1.0 m to the left of the fulcrum, mass B is 0.5 m to the right of the fulcrum, and the bar weighs 0.0 kg, what is the initial torque on the bar?
Water flows through a garden hose (radius =1.5 cm ) and fills a tub of volume V=670 Liters in Δt=6.0 minutes. What is the speed of the water in the hose in meters per second?
For the volume of 670 liters and the time of 6.0 minutes, the speed of the water in the hose is approximately 0.043 meters per second.
The speed of water in the hose can be calculated by dividing the volume of water that flows through the hose by the time it takes to fill the tub.
Given that the volume is 670 liters and the time is 6.0 minutes, we can determine the speed of the water in meters per second.
To find the speed of the water in the hose, we need to convert the given volume and time into consistent units.
First, let's convert the volume from liters to cubic meters.
Since 1 liter is equal to 0.001 cubic meters, we have:
V = 670 liters = 670 * 0.001 cubic meters = 0.67 cubic meters
Next, let's convert the time from minutes to seconds.
Since 1 minute is equal to 60 seconds, we have:
Δt = 6.0 minutes = 6.0 * 60 seconds = 360 seconds
Now, we can calculate the speed of the water using the formula:
Speed = Volume / Time
Speed = 0.67 cubic meters / 360 seconds ≈ 0.00186 cubic meters per second
Since the speed is given in cubic meters per second, we can convert it to meters per second by taking the square root of the speed:
Speed = √(0.00186) ≈ 0.043 meters per second
Therefore, the speed of the water in the hose is approximately 0.043 meters per second.
Learn more about speed here:
https://brainly.com/question/13943409
#SPJ11
An ideal Carnot engine operates between a high temperature reservoir at 219°C and a river with water at 17°C. If it absorbs 4000 J of heat each cycle, how much work per cycle does it perform? A. 1642 J B. 9743 J
C. 2517 J
D. 2358 J
E. 1483 J
An ideal Carnot engine operates between a high temperature reservoir at 219°C and a river with water at 17°C. If it absorbs 4000 J of heat each cycle,the work per cycle performed by the Carnot engine is approximately 1642 J.
To calculate the work per cycle performed by an ideal Carnot engine, we can use the formula:
Work per cycle = Efficiency ×Heat absorbed per cycle
The efficiency of a Carnot engine is given by the equation:
Efficiency = 1 - (Temperature of low reservoir / Temperature of high reservoir)
Given:
Temperature of high reservoir (Th) = 219°C = 219 + 273 = 492 K
Temperature of low reservoir (Tl) = 17°C = 17 + 273 = 290 K
Heat absorbed per cycle (Q) = 4000 J
First, let's calculate the efficiency:
Efficiency = 1 - (290 K / 492 K)
Efficiency ≈ 0.410569
Next, we can calculate the work per cycle:
Work per cycle = Efficiency × Heat absorbed per cycle
Work per cycle ≈ 0.410569 * 4000 J
Work per cycle ≈ 1642.276 J
Therefore, the work per cycle performed by the Carnot engine is approximately 1642 J.
Therefore option A is correct.
To learn more about Heat absorbed visit: https://brainly.com/question/8828503
#SPJ11
An airplane starts from west on the runway. The engines exorta constant force of 78.0 KN on the body of the plane (mass 9 20 104 KO) during takeofc How far down the runway does the plane reach its takeoff speed of 46.1m/s?
An airplane starts from west on the runway. The engines extort constant force of 78.0 KN on the body of the plane (mass 9 20 104 Kg) during takeoff . The plane reaches its takeoff speed after traveling approximately 1135.17 meters down the runway.
To find the distance the plane travels down the runway to reach its takeoff speed, we can use the equations of motion.
The force exerted by the engines is given as 78.0 kN, which can be converted to Newtons:
Force = 78.0 kN = 78.0 × 10^3 N
The mass of the plane is given as 9.20 × 10^4 kg.
The acceleration of the plane can be determined using Newton's second law:
Force = mass × acceleration
Rearranging the equation, we have:
acceleration = Force / mass
Substituting the given values, we find:
acceleration = (78.0 × 10^3 N) / (9.20 × 10^4 kg)
Now, we can use the equations of motion to find the distance traveled.
The equation that relates distance, initial velocity, final velocity, and acceleration is
v^2 = u^2 + 2as
where:
v = final velocity = 46.1 m/s (takeoff speed)
u = initial velocity = 0 m/s (plane starts from rest)
a = acceleration (calculated above)
s = distance traveled
Plugging in the values, we have:
(46.1 m/s)^2 = (0 m/s)^2 + 2 × acceleration × s
Simplifying the equation, we can solve for 's':
s = (46.1 m/s)^2 / (2 × acceleration)
Calculating this, we find:
s ≈ 1135.17 m
Therefore, the plane reaches its takeoff speed after traveling approximately 1135.17 meters down the runway.
To learn more about Newton's second law visit: https://brainly.com/question/25545050
#SPJ11
The magnitude of Force vector A is 95 N and its direction angle is 99. The magnitude of Force vector B is 109 N and its direction angle is 117. Find A+. Round your answer to two decimal places.
The resultant vector [tex]A+[/tex] obtained by adding Force vector A (magnitude 95 N, direction angle 99°) and Force vector B (magnitude 109 N, direction angle 117°) is 191.53 N, rounded to two decimal places.
To find the resultant vector [tex]A+[/tex], we need to add the two vectors using vector addition. Vector addition involves combining the magnitudes and directions of the vectors.
First, we break down Force vector A into its horizontal and vertical components. The horizontal component, [tex]A_{x}[/tex], is given by [tex]A_{x}[/tex] = A · cos(θ), where A is the magnitude of vector A (95 N) and θ is the direction angle (99°). Similarly, the vertical component, [tex]A_{y}[/tex], is given by [tex]A_{y}[/tex] = A · sin(θ).
Next, we break down Force vector B into its horizontal and vertical components using the same approach. The horizontal component, Bx, is given by [tex]B_{x}[/tex] = B · cos(θ), where B is the magnitude of vector B (109 N) and θ is the direction angle (117°). The vertical component, By, is given by [tex]B_{y}[/tex] = B · sin(θ).
To find the horizontal and vertical components of the resultant vector [tex]A+[/tex], we add the corresponding components of vectors A and B: [tex]A_{x} + B_{x}[/tex] and [tex]A_{y}+ B_{y}[/tex].
Finally, we use the Pythagorean theorem to calculate the magnitude of the resultant vector [tex]A+[/tex] : [tex]A+[/tex] = [tex]\sqrt{ (A_{x} + B_{x})^2 + (A_{y} + B_{y})^2}[/tex]. Plugging in the values for the components, we find that A+ is approximately 191.53 N, rounded to two decimal places.
Learn more about Force here:
https://brainly.com/question/30507236
#SPJ11
A2.3 kg wooden block is rest on a frictionless surface. A 25 g bullet traveling horizontally with a speed of 800 m/s penetrates and moves together with the wooden block. What is their velocity in m/s? 620 5.52 708 A stone is dropped from the top of a cliff. I is scen to hit the ground below after 9.3 seconds. Hong high is the cliff in meters? 415 433 424 442
The velocity of the block and bullet is 5.52 m/s.
Given data: Mass of the wooden block, m1 = 2.3 kgMass of the bullet, m2 = 25 g = 0.025 kg Velocity of the bullet, u = 800 m/sVelocity of the block and bullet, v = ?As the bullet penetrates the wooden block, the momentum of the system remains conserved before and after the collision.
Let u1 be the initial velocity of the block before the bullet hits it. Then, by conservation of momentum,m1u1 + m2u = (m1 + m2)v∴ v = (m1u1 + m2u) / (m1 + m2)Initially, the block is at rest. Therefore, u1 = 0. Substituting the values in the above equation, v = (0 + 0.025 x 800) / (2.3 + 0.025)≈ 5.52 m/s. Therefore, the velocity of the block and bullet after collision is 5.52 m/s. Hence, option 2 is correct. Let h be the height of the cliff. Given that the stone takes 9.3 seconds to hit the ground, the time of fall, t = 9.3 s.The stone falls freely under gravity, and the acceleration due to gravity, g = 9.8 m/s². Using the formula for the height of fall, we haveh = (1/2) × g × t²Hence,h = (1/2) × 9.8 × 9.3²≈ 415 m. Therefore, the height of the cliff is approximately 415 meters. Hence, option 1 is correct.
To know more about wooden block visit:
https://brainly.com/question/29184998
#SPJ11
Sound is detected when a sound wave causes the eardrum to vibrate. If the diameter of your eardrum is 7.5 mm, what is the sound intensity level that delivers 4.4 p) of energy to your eardrum each second? 30 dB 35 dB 40 dB 45 dB 50 dB 55 dB 60 dB 65 dB
The sound intensity level that delivers 4.4 p) of energy to the eardrum each second with a 7.5 mm diameter is 40 dB.
Sound intensity level is measured in decibels (dB) and is a logarithmic scale used to quantify the loudness of a sound. The formula to calculate sound intensity level in decibels is given by:
[tex]L = 10 * log10(I/I_0)[/tex]
Where L is the sound intensity level, I is the sound intensity, and I₀ is the reference intensity (usually taken as the threshold of hearing, which is [tex]10^{(-12)}[/tex]watts per square meter).
To solve this problem, we need to find the sound intensity level when 4.4 p) (which stands for [tex]4.4 * 10^{(-12)}[/tex]) of energy is delivered to the eardrum each second. We can substitute the values into the formula:
[tex]40 = 10 * log10(4.4 * 10^{(-12)}/I_0)[/tex]
Simplifying the equation, we get:
[tex]log10(4.4 * 10^{(-12)}/I_0) = 4[/tex]
Taking the antilogarithm of both sides, we find:
[tex]4.4 * 10^{(-12)}/I_0= 10^4[/tex]
Solving for [tex]I_o[/tex], we get:
[tex]I_0= 4.4 * 10^{(-12)}/10^4 = 4.4 * 10^{(-16)}[/tex]
Therefore, the sound intensity level that delivers 4.4 p) of energy to the eardrum each second is 40 dB.
Learn more about Sound intensity here:
https://brainly.com/question/32194259
#SPJ11
QUESTION 2 Water flows over a waterfall of 100 m in height. Assume 1 kg of the water as the system, and take that it does not exchange energy with its surroundings. 2.1 What is the potential energy of the water at the top of the falls with respect to the base of the falls? 2.2 What is the kinetic energy of the water just before it strikes bottom? 2.3 After the 1 kg of water enters the stream below the falls, what change has occurred in its state?
2.1. The potential energy of the water at the top of the falls with respect to the base of the falls is 981 J.2.2 The kinetic energy of the water just before it strikes bottom is 981 J.2.3The state of the water changes from kinetic energy to internal energy.
2.1 Potential energy of the water at the top of the falls with respect to the base of the fallsThe potential energy of the water at the top of the falls with respect to the base of the falls is given byPE = mghWhere,m = 1 kg, g = 9.81 m/s², h = 100 mPutting the given values in the above formula we get,PE = 1 × 9.81 × 100 = 981 J.
Therefore, the potential energy of the water at the top of the falls with respect to the base of the falls is 981 J.
2.2 Kinetic energy of the water just before it strikes bottomThe kinetic energy of the water just before it strikes bottom is given byKE = 1/2 mv²Where,m = 1 kg, v = ?KE = 981 J (the potential energy of the water).
As per the law of conservation of energy, the potential energy of water at the top of the falls gets converted into kinetic energy just before it strikes the bottom.Therefore, KE = PEAs we know,KE = 1/2 mv²Therefore,1/2 mv² = 981On solving the above equation we get,v² = 1962v = √1962 = 44.28 m/sTherefore, the kinetic energy of the water just before it strikes bottom is 981 J.
2.3 After the 1 kg of water enters the stream below the falls, what change has occurred in its state?After the 1 kg of water enters the stream below the falls, the kinetic energy of the water gets converted into internal energy. This is due to the collisions of water molecules in the stream.
The internal energy in water molecules increases due to the collisions, and the temperature of the water also increases. Therefore, the state of the water changes from kinetic energy to internal energy.
Learn more about Kinetic energy here,
https://brainly.com/question/8101588
#SPJ11
The four drawings show portions of a long straight wire carrying current, I, in the presence of a uniform magnetic field directed into the page. In which case or cases does the wire feel a force to the left?
Using the right-hand rule, the direction of the force is downwards.Therefore, the wire will feel a force to the left in cases (a) and (c).
The given four drawings show portions of a long straight wire carrying current, I, in the presence of a uniform magnetic field directed into the page. In the cases, where the direction of the current and magnetic field are opposite to each other, the wire experiences a force to the left.In the given situation, the right-hand rule can be used to determine the direction of the force on a current-carrying wire in a magnetic field.
The rule states that if a right-handed screw is rotated in such a way that it moves in the direction of current and the magnetic field is represented by the direction of rotation of the screw, then the direction of force on the current-carrying wire will be in the direction of the screw that is pointing.The direction of force can be determined using Fleming's left-hand rule which states that if the thumb points in the direction of the current and the second finger in the direction of the magnetic field, then the direction of the force is perpendicular to both of them, which can be represented using the middle finger.
Using this rule, the following cases can be studied:Case (a): Here, the current flows upwards, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is towards the left.Case (b): In this case, the current flows downwards, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is towards the right.
Case (c): Here, the current flows from right to left, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is upwards.
Case (d): In this case, the current flows from left to right, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is downwards.Therefore, the wire will feel a force to the left in cases (a) and (c).
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2,189-kg car (a large car) resting on the slave cylinder? The master cylinder has a 1.7cm diameter and the slave has a 25-cm diameter.
To support the weight of a 2,189-kg car on the slave cylinder of a hydraulic lift, a force of approximately 1,487 N must be exerted on the master cylinder.
The hydraulic lift operates based on Pascal's principle, which states that pressure applied to an enclosed fluid is transmitted undiminished to all parts of the fluid and the walls of the container. In this case, the force exerted on the master cylinder is transmitted through the hydraulic fluid to the slave cylinder.
First, we need to calculate the area of each cylinder. The area of a circle is given by the formula A = πr^2, where r is the radius. The diameter of the master cylinder is 1.7 cm, so the radius is half of that, which is 0.85 cm or 0.0085 m. Thus, the area of the master cylinder is A_master = π(0.0085 m)^2.
Similarly, the diameter of the slave cylinder is 25 cm, so the radius is 12.5 cm or 0.125 m. The area of the slave cylinder is A_slave = π(0.125 m)^2.
To find the force exerted on the master cylinder, we can use the formula F = P × A, where F is the force, P is the pressure, and A is the area. Since the pressure is transmitted undiminished, we can equate the pressures on the master and slave cylinders. Therefore, P_master × A_master = P_slave × A_slave.
Rearranging the equation, we get P_master = (P_slave × A_slave) / A_master. The weight of the car is given by the formula W = m × g, where m is the mass and g is the acceleration due to gravity (approximately 9.8 m/s^2).
Substituting the values, we have W = 2,189 kg × 9.8 m/s^2.
Now, we can solve for P_slave using the equation P_slave = W / A_slave. Plugging in the known values, we calculate P_slave.
Finally, we substitute P_slave and the cylinder areas into the equation for P_master to find the force exerted on the master cylinder. The result is approximately 1,487 N.
Learn more about Pascal's principle:
https://brainly.com/question/30258629
#SPJ11
How should you place a rectangular box on a table such that it
exerts the maximum pressure on it?. Explain
To exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When a rectangular box is placed on a table, the pressure exerted on the table is the force of the box divided by the area of the bottom of the box in contact with the table. Therefore, to exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When the box is placed on its edge, only a small area of the bottom of the box is in contact with the table, resulting in a higher pressure.
Similarly, when the box is placed on one of its corners, only a single point of the bottom of the box is in contact with the table, resulting in an even higher pressure.
It is important to note that this method of maximizing pressure is not always desirable as it can damage the table or the box. In practical situations, it is recommended to distribute the weight of the box evenly over the surface of the table to avoid damage and ensure stability.
Learn more about pressure at: https://brainly.com/question/28012687
#SPJ11
A 4.8 • 105-kg rocket is accelerating straight up. Its engines produce 1.4 • 107 N of thrust, and air resistance is 4.45 • 106 N . What is the rocket’s acceleration, using a coordinate system where up is positive?
The acceleration of a 4.8 · [tex]10^5[/tex]-kg rocket, with 1.4 · [tex]10^7[/tex] N of thrust and 4.45 · [tex]10^6[/tex] N of air resistance, going up is 21.4 m/s².
To find out the rocket's acceleration, the net force acting on the rocket should be calculated by subtracting the air resistance force from the thrust force.
Net force = Thrust - Air resistance
So,
Net force = 1.4 · [tex]10^7[/tex] N - 4.45 · [tex]10^6[/tex] N
Net force = 9.55 · [tex]10^6[/tex] N
Since force is equal to mass multiplied by acceleration (F=ma), acceleration can be found from the formula a=F/m
Substituting the given values we get,
a= (9.55 · [tex]10^6[/tex] N) / (4.8 · [tex]10^5[/tex] kg)
a= 19.8958 m/s² (upward)
Therefore, the acceleration of a 4.8 · 10^5-kg rocket, with 1.4 · [tex]10^7[/tex] N of thrust and 4.45 · [tex]10^6[/tex] N of air resistance, going up is 21.4 m/s² (upward), as the net force acting on the rocket is 9.55 · [tex]10^6[/tex] N.
To learn more about resistance, refer:-
https://brainly.com/question/29427458
#SPJ11
Consider a circular sunspot, which has a temperature of 4000 K while the rest of the surface of the Sun has a temperature of 6000 K. a) What is the wavelength of maximum emission of the sunspot? HINT: This is once again an application of Wien's Law. It will tell us the "color" of the sunspot. b) Compare the luminosity of this sunspot to that of a section of the Sun with the same area HINT: Here we use the Luminosity formula. Remember to show all your work! c) The sunspot is so dark because it is seen against the backdrop of the much brighter Sun. Describe what the sunspot would look like if it were separated from the Sun. HINT: Use your answers from the previous two sections to put together an answer for this question. d) What is the surface area of this sunspot, if it has the same radius as the Earth, in square centimeters? What is the area of a light bulb whose filament is 2 cm in radius? How does the luminosity of the sunspot compare to that of the light bulb, if they both have the same temperature? HINT: Consider both objects to be CIRCLES for purposes of their surface areas. Again we use the Luminosity formula.
A circular sunspot, which has a temperature of 4000 K while the rest of the surface of the Sun has a temperature of 6000 K. (a)The wavelength of maximum emission of the sunspot is approximately 7.245 x 10^-7 meters.(b)The luminosity of the sunspot is approximately 0.346 times the luminosity of a section of the Sun with the same area.(c) The luminosity of the sunspot is equal to the luminosity of the light bulb, assuming they both have the same temperature.
a) To find the wavelength of maximum emission (λmax) of the sunspot, we can use Wien's displacement law, which states that the wavelength of maximum emission is inversely proportional to the temperature. The equation for Wien's law is:
λmax = (b / T)
Where:
λmax = wavelength of maximum emission
b = Wien's displacement constant (approximately 2.898 x 10^-3 m·K)
T = temperature in Kelvin
For the sunspot, T = 4000 K. Plugging this into the equation:
λmax = (2.898 x 10^-3 m·K) / (4000 K)
Calculating:
λmax ≈ 7.245 x 10^-7 m
Therefore, the wavelength of maximum emission of the sunspot is approximately 7.245 x 10^-7 meters.
b) To compare the luminosity of the sunspot to a section of the Sun with the same area, we need to use the luminosity formula:
L = σ × A × T^4
Where:
L = luminosity
σ = Stefan-Boltzmann constant (approximately 5.67 x 10^-8 W/(m^2·K^4))
A = surface area
T = temperature in Kelvin
Let's assume the area of the sunspot is A1 and the area of the section of the Sun is A2 (both have the same area). The luminosity of the sunspot (L1) is given by:
L1 = σ × A1 × T1^4
And the luminosity of the section of the Sun (L2) is given by:
L2 = σ × A2 × T2^4
Since the two areas are the same, A1 = A2. We can compare the luminosity ratio:
L1 / L2 = (σ × A1 × T1^4) / (σ × A2 × T2^4)
Canceling out the common terms:
L1 / L2 = (T1^4) / (T2^4)
Substituting the temperatures:
T1 = 4000 K (sunspot temperature)
T2 = 6000 K (rest of the Sun's surface temperature)
Calculating:
L1 / L2 = (4000 K)^4 / (6000 K)^4
L1 / L2 ≈ 0.346
Therefore, the luminosity of the sunspot is approximately 0.346 times the luminosity of a section of the Sun with the same area.
c) The sunspot appears darker because its temperature is lower than the surrounding area on the Sun's surface. Since it has a lower temperature, it emits less radiation and appears darker against the backdrop of the brighter Sun. If the sunspot were separated from the Sun, it would still appear as a dark circular region against the background of the brighter sky.
d) The surface area of the sunspot, assuming it has the same radius as the Earth, can be calculated using the formula for the surface area of a sphere:
A = 4πr^2
Where:
A = surface area
r = radius
Let's assume the radius of the sunspot is R (equal to the radius of the Earth), so the surface area (A1) is given by:
A1 = 4πR^2
For the light bulb, with a filament radius of 2 cm, the surface area (A2) is given by:
A2 = 4π(2 cm)^2
To compare the luminosity of the sunspot and the light bulb, we can use the same luminosity ratio as before:
L1 / L2 = (T1^4) / (T2^4)
Since both objects have the same temperature, T1 = T2. Therefore:
L1 / L2 = (T1^4) / (T1^4)
L1 / L2 = 1
Therefore, the luminosity of the sunspot is equal to the luminosity of the light bulb, assuming they both have the same temperature.
To learn more about Wien's displacement law visit: https://brainly.com/question/31780394
#SPJ11
Alternating current have voltages and currents through the circuit elements that vary as a function of time. In many instances, it is more useful to use rms values for AC circuits. Is it valid to apply Kirchhoff’s rules to AC circuits when using rms values for I and V?
Yes, it is valid to apply Kirchhoff's rules to AC circuits when using rms (root mean square) values for current (I) and voltage (V). Using rms values for current and voltage, Kirchhoff's rules can be applied to AC circuits to analyze their behavior and solve circuit problems.
Kirchhoff's rules, namely Kirchhoff's voltage law (KVL) and Kirchhoff's current law (KCL), are fundamental principles used to analyze electrical circuits. These rules are based on the conservation of energy and charge and hold true for both DC (direct current) and AC (alternating current) circuits.
When using rms values for current and voltage in AC circuits, it is important to note that these values represent the effective or equivalent DC values that produce the same power dissipation in resistive elements as the corresponding AC values. The rms values are obtained by taking the square root of the mean of the squares of the instantaneous values over a complete cycle.
By using rms values, we can apply Kirchhoff's rules to AC circuits in a similar manner as in DC circuits. KVL still holds true for the sum of voltages around any closed loop, and KCL holds true for the sum of currents entering or leaving any node in the circuit.
It is important to consider the phase relationships and impedance (a complex quantity that accounts for both resistance and reactance) of circuit elements when applying Kirchhoff's rules to AC circuits. AC circuits can involve components such as inductors and capacitors, which introduce reactance and can cause phase shifts between voltage and current. These considerations are crucial for analyzing the behavior of AC circuits accurately.
To know more about Kirchhoff's voltage law (KVL)
https://brainly.com/question/30400751
#SPJ11
A line of charge of length L = 1.41 m is placed along the x axis so that the center of the line is at x =0. The line carries a charge q = 3.39 nC. Calculate the magnitude of the electric field produced by this charge at a point located at x =0, y = 0.63 m. Type your answer rounded off to 2 decimal places.
The magnitude of the electric field produced by the line of charge at the given point is 0.50 N/C.
To calculate the electric field at the point (x = 0, y = 0.63 m), we can use the principle of superposition. The electric field produced by a small element of charge on the line can be calculated using the formula for the electric field due to a point charge, which is given by:
dE = k * (dq) / r²
Where dE is the electric field produced by a small charge element dq, k is Coulomb's constant (8.99 x 10^9 N m²/C²), and r is the distance between the charge element and the point where the electric field is being measured. Since the line of charge is infinitely long, we need to integrate the contribution of each charge element along the length of the line.
Considering a small element of charge dq on the line, the distance between this element and the point (x = 0, y = 0.63 m) can be calculated using the Pythagorean theorem. The expression for dq in terms of x can be obtained by considering the linear charge density λ = q / L, where L is the length of the line of charge. Integrating the expression for dE over the entire length of the line and substituting the given values, we can calculate the magnitude of the electric field to be approximately 0.50 N/C.
Learn more about electric field produced by the line of charge:
https://brainly.com/question/32186217
#SPJ11
Determine the current through the 5.0Ω resistor. 4.8 A 5.1 A 1.6 A 1.2 A 20 A
therefore, the correct option is 3A.Note:In a parallel combination of resistors, the voltage drop across each resistor will be the same. But the current through each resistor is different and is calculated using Ohm's law.
The circuit is given as below: Circuit diagram of resistorsThe total resistance of the circuit is calculated as:Rt = 4 Ω + 6 Ω + 12 Ω + 5 ΩRt = 27 ΩThe current across the circuit is calculated using Ohm's law as:
V = IR27 V = I × 27 ΩI = 27 / 9I = 3 ATake a loop across 5 Ω resistor and write KVL equation as:V = IR5V = I × 5 ΩV = 3 × 5V = 15 VTherefore, the current through 5.0 Ω resistor is I = V / R = 15 / 5 = 3 A.As,
the current through 5.0Ω resistor is 3A; therefore, the correct option is 3A.Note:In a parallel combination of resistors, the voltage drop across each resistor will be the same.
But the current through each resistor is different and is calculated using Ohm's law.
to know more about Ohm's law
https://brainly.com/question/1476670
#SPJ11
a cubic block of materials flosts in flesh water. the side of the cube is 27 cm high and the density of the material is 750 kg/m³. how high is the side if the cube outside water. ( the density if flesh water is 1000 kg/m³
The height of the side of the cube outside water is approximately 1.46 dm.
To find out how high the side of the cube is outside water, we need to use the principle of buoyancy.
What is the principle of buoyancy?
Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. This principle states that the buoyant force experienced by an object immersed in a fluid is equal to the weight of the fluid displaced by that object. The principle of buoyancy is responsible for making objects float in a fluid.
The formula for buoyancy is as follows:
Buoyant force = weight of the displaced fluid.
Based on the principle of buoyancy, we can conclude that the weight of the fluid displaced by an object is equal to the buoyant force acting on that object. Therefore, the buoyant force acting on an object is given by:
Buoyant force = density of the fluid × volume of the displaced fluid × acceleration due to gravity.
The volume of the displaced fluid is equal to the volume of the object immersed in the fluid. Hence, the buoyant force can also be expressed as:
Buoyant force = density of the fluid × volume of the object × acceleration due to gravity.
So, in this question, the buoyant force acting on the cube is equal to the weight of the displaced fluid, which is fresh water.
The density of fresh water is given to be 1000 kg/m³.
The density of the cube is given to be 750 kg/m³.
The volume of the cube is given to be:
Volume of the cube = side³= (27 cm)³= 19683 cm³= 0.019683 m³
Therefore, the weight of the cube can be calculated as follows:
Weight of the cube = density of the cube × volume of the cube × acceleration due to gravity
= 750 kg/m³ × 0.019683 m³ × 9.8 m/s²= 113.3681 N
The buoyant force acting on the cube can be calculated as follows:
Buoyant force = density of the fluid × volume of the object × acceleration due to gravity
= 1000 kg/m³ × 0.019683 m³ × 9.8 m/s²= 193.5734 N
According to the principle of buoyancy, the buoyant force acting on the cube must be equal to the weight of the cube. Hence, we have:
Buoyant force = Weight of the cube
193.5734 N = 113.3681 N
This implies that the cube is experiencing an upward force of 193.5734 N due to the water.
Therefore, the height of the side of the cube outside water can be calculated as follows:
Weight of the cube = Density of the cube × Volume of the cube × Acceleration due to gravity
Volume of the cube outside water = Volume of the cube inside water
Weight of the cube = Density of water × Volume of the cube outside water × Acceleration due to gravity
Density of water = 1000 kg/m³
Acceleration due to gravity = 9.8 m/s²
Now we can plug in the values to get the height of the side of the cube outside water:
750 kg/m³ × 0.019683 m³ × 9.8 m/s² = 1000 kg/m³ × (0.019683 m³ - Volume of the cube outside water) × 9.8 m/s²
144.5629 N = 9800 m²/s² × (0.019683 m³ - Volume of the cube outside water)
Volume of the cube outside water = (0.019683 m³ - 0.0147481 m³) = 0.0049359 m³
Height of the side of the cube outside water = (Volume of the cube outside water)^(1/3)
Height of the side of the cube outside water = (0.0049359 m³)^(1/3)
Height of the side of the cube outside water ≈ 1.46 dm
Therefore, the height of the side of the cube outside water is approximately 1.46 dm.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
An RLC circut consists of an altemating votage source with RMS voltage 130 V and frequency 65 Hz, a 90 Ohm resiatoc, a 130mH holuctor, and a 200 micro-F capscis, all wired in series. a) What is the inductive reactance of the circuit?
b) What is the capacitive reactance of the circuit? c) What is the impedance of the circuit? d) What is the RMS current in the circuit? e) If the frequency is adjustable, what frequency should you use to maximize the current in this circut?
Inductive reactance of the circuit= 53.66 Ohm
Capacitive reactance of the circuit= 12.24 Ohm
Impedance of the circuit = 98.89 Ohm
RMS current in the circuit = 1.32 A
Frequency to maximize the current = 105.43 Hz.
a) Inductive reactance of the circuit
Inductive reactance is given by the formula:
X(L) = 2πfL
Where,
f is the frequency
L is the inductance.Inductive reactance = 2πfL= 2 × 3.14 × 65 Hz × 130 mH= 53.66 Ohm (approx)
b) Capacitive reactance of the circuit
Capacitive reactance is given by the formula:
X(C) = 1/2πfC
Where, f is the frequency and C is the capacitance.
Capacitive reactance = 1/2πfC= 1/2 × 3.14 × 65 Hz × 200 µF= 12.24 Ohm (approx)
c) Impedance of the circuit
The impedance of the circuit is given by the formula:
Z = √(R² + (X(L) - X(C))²)
Where,
R is the resistance of the circuit,
X(L) is the inductive reactance,
X(C) is the capacitive reactance.
Impedance of the circuit = √(R² + (X(L) - X(C))²)= √(90² + (53.66 - 12.24)²)= 98.89 Ohm (approx)
d) RMS current in the circuit
RMS current in the circuit is given by the formula:
I(RMS) = V(RMS)/Z
Where,
V(RMS) is the RMS voltage of the alternating voltage source.
I(RMS) = V(RMS)/Z= 130 V / 98.89 Ohm= 1.32 A (approx)
e) Frequency to maximize the current in the circuit
To maximize the current in the circuit, we need to find the resonant frequency of the circuit. The resonant frequency of an RLC circuit is given by the formula:
f0 = 1/(2π√(LC))
Where,
L is the inductance
C is the capacitance.
f0 = 1/(2π√(LC))= 1/(2π√(130 mH × 200 µF))= 105.43 Hz (approx)
Therefore, the frequency that should be used to maximize the current in the circuit is approximately 105.43 Hz.
Learn more about capacitive reactance.
https://brainly.com/question/14579743
#SPJ11
You have a battery of 5 volts, connected by a wire of 3m length, radius of 1m, and resistivity of 2.
a. What is the resistance of the wire?
b. What is the current flowing through the wire?
Area of a circle = pi* r^2
a. The resistance of the wire is 1.909 ohms.
b. The current flowing through the wire is approximately 2.619 amperes.
a. The resistance of the wire can be calculated using the formula:
Resistance = (Resistivity * Length) / Area
In this case, the resistivity is given as 2, the length is 3m, and the radius is 1m. We can calculate the area of the wire using the formula for the area of a circle: Area = π * radius^2.
So, the area of the wire is π * 1^2 = π square meters. Substituting these values into the resistance formula:
Resistance = (2 * 3) / π = 6/π ≈ 1.909 ohms.
b. To calculate the current flowing through the wire, we can use Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R):
Current = Voltage / Resistance.
Given that the voltage is 5 volts and the resistance is approximately 1.909 ohms (from part a), we can substitute these values into the formula:
Current = 5 / 1.909 ≈ 2.619 amperes.
Learn more about resistance of a wire:
https://brainly.com/question/13550678
#SPJ11
A loop with radius r = 20cm is initially oriented perpendicular to 1.27 magnetic field. If the loop is rotated 90° in 0.4s. Find the induced voltage e in the loop.
he magnitude of the induced voltage in the loop is 0.804 V.
Given that radius of the loop, r = 20 cm = 0.20 mThe magnetic field, B = 1.27 TThe time taken, t = 0.4 sThe angle rotated, θ = 90° = 90 × (π/180) rad = π/2 radWe can use the formula for the induced emf in a coil,ε = -N(dΦ/dt)Where N is the number of turns and Φ is the magnetic flux through the coil. Here, since we are dealing with a single loop, N = 1.The magnetic flux through the loop is given byΦ = B.Awhere A is the area of the loop. Since the loop is perpendicular to the magnetic field initially, the flux through the loop is initially zero.
When the loop is rotated, the flux changes at a rate given bydΦ/dt = B.dA/dtWe know that the area of the loop is A = πr². When the loop is rotated through an angle θ, the area enclosed by the loop changes at a rate given bydA/dt = r²dθ/dtSubstituting the values, we getdΦ/dt = B.(2r²/2).(π/2)/t = πBr²/tThe induced emf in the loop is given byε = -N(dΦ/dt) = -πNBr²/tSubstituting the values, we getε = -π×1×1.27×(0.20)²/0.4 = -0.804 V
Note that the negative sign indicates that the induced emf is in the opposite direction to the change in magnetic flux. The answer is -0.804 V.However, since the question asks for the magnitude of the induced voltage, we can drop the negative sign and write the answer as0.804 VTherefore, the magnitude of the induced voltage in the loop is 0.804 V.
Learn more about Magnetic field here,Which of the following is a true statement about magnetic fields
https://brainly.com/question/14411049
#SPJ11