When water boils, it pushes upward against the air pressure pushing down on it. If there is less air pressure, how does that affect the pooling point ?

Answer: 1M

Explanation:

Molarity = mols/L

moles of lead bromide: 183.51/ 367.0 = 0.5 mol

500 ml/ 1000 mL = .5L

.5 mol / .5 L = 1 mol/L = 1M

Answer:

[tex]V = 0.117 \ L[/tex]

General Formulas and Concepts:

Chem

Explanation:

Step 1: Define

1.57 M KOH (potassium hydroxide)

10.3 g KOH

Step 2: Define conversions

Molar Mass of K - 39.10 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of H - 1.01 g/mol

Molar Mass of KOH - 39.10 + 16.00 + 1.01 = 56.11 g/mol

Step 3: Convert

[tex]10.3 \ g \ KOH(\frac{1 \ mol \ KOH}{56.11 \ g \ KOH} )[/tex] = 0.183568 mol KOH

Step 4: Solve for Volume

Step 5: Check

We are given 3 sig figs. Follow sig fig rules.

[tex]0.116922 \ L \approx 0.117 \ L[/tex]

Answer:

Answer. Answer: Nitrogen (N), antimony (Sb), bismuth (Bi) is the order from least conductive to most conductive.

Answer:

nitrogen (N), antimony (Sb), bismuth (Bi)

Answer:

my gues is red not a 100% but its in the 700s

Explanation:

The final temperature of the liquid water after all the ice has melted is equal to 25°C.

The specific heat capacity can be described as the quantity of heat needed to raise the temperature in one unit (1kg) of substance by one-degree Celcius.

The formula to show the relationship between the specific heat capacity and heat absorbed or lost is:

Q = mCΔT

Given, the amount of ice, m = 100g

The amount of water, M = 300g

The specific heat capacity of the water, C = 1 cal /g°C

The heat of fusion of ice, C = 80 cal/g

Heat given by water = Heat taken by ice + Heat taken by water formed from ice

300 × 1 ×(60 - T) = 100 × 80  + 100 × 1 ×T

18000 - 300 T = 8000 + 100 T

400 T = 10000

T = 25°C

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ2

Answer:

Kinetic energy

Explanation:

Fireworks convert chemical energy into kinetic energy to send them flying upward. Hope it is correct!

Answer:

8.52 m/s

Explanation:

Step 1: Given data

Step 2: Convert "T" to the Kelvin scale

When working with gases, we need to consider the absolute temperature. We will convert from Celsius to Kelvin using the following expression.

K = °C + 273.15 = -16 + 273.15 = 257 K

Step 3: Calculate the root mean square speed of the gas

The root mean square speed measures the average speed of particles in a gas. We will calculate it using the following expression.

[tex]v_{rms} = \sqrt{\frac{3 \times R \times T}{M} } = \sqrt{\frac{3 \times 8.314 J/mol.K \times 257 K}{88.30 g/mol} } = 8.52 m/s[/tex]

Answer:

Younger/newer

Explanation:

Stratagraphic means an intrusion or fault is younger than the layer it affects.

Answer:

Kb = 1.6 × 10⁻⁵

Explanation:

Step 1: Given data

Acid dissociation constant of hydrocyanic acid (Ka): 6.2 × 10⁻¹⁰

Concentration of cyanide ion (Cb): 0.1 M

Step 2: Calculate the basic dissociation constant (Kb) of cyanide ion

We have the Ka of HCN. We can calculate the Kb of its conjugate base using the following expression.

Ka × Kb = Kw = 1.0 × 10⁻¹⁴

Kb = 1.0 × 10⁻¹⁴/Ka

Kb = 1.0 × 10⁻¹⁴/6.2 × 10⁻¹⁰

Kb = 1.6 × 10⁻⁵

The  Kb for a 0.1 M solution of cyanide ion is :

- 1.6 × 10⁻⁵

Given:

Acid dissociation constant of hydrocyanic acid (Ka)= 6.2 × 10⁻¹⁰

Concentration of cyanide ion (Cb)= 0.1 M

Base dissociation constant (kb)=?

Ka × Kb = Kw = 1.0 × 10⁻¹⁴

Kb = 1.0 × 10⁻¹⁴/Ka

Kb = 1.0 × 10⁻¹⁴/6.2 × 10⁻¹⁰

Kb = 1.6 × 10⁻⁵

Learn more about " Kb":

https://brainly.com/question/26871012?referrer=searchResults

Answer:

Deuterium and Lithium.

Explanation:

I searched it up on google.

Answer:

0.0148 moles

Explanation:

Solid copper is oxidized with HNO₃:

Cu + 4HNO₃ → Cu²⁺ + 2 NO₃⁻ + 2H₂O + 2NO₂

Where 1 mole of Cu produce 1 mole of Cu²⁺ when nitric acid is in excess.

Moles of Cu that react (Molar mass Cu = 63.546g/mol):

0.94g * (1mol / 63.546g) = 0.0148 moles of Cu

And moles of Cu²⁺ produced are also:

Answer:

5 valence elctrons

Explanation:

the outer most orbitals, 3s2 and 3p3 contains 5 electrons, thus valences electrons for P is 5

Answer: Some salt is trapped between ice crystals, but most are left behind in the unfrozen seawater.

Explanation:

Answer: The salinity of the water increases

Explanation: Hope this helps!

Answer:

V₂ = 4.4 L

Explanation:

Given data:

Initial volume = 5.5 L

Initial pressure = 650 mmHg (650/760 =0.86 atm)

Initial temperature = 20 °C (20 +273 = 293 K)

Final temperature = 273 K

Final volume = ?

Final pressure =  1 atm

Solution:

Formula:  

P₁V₁/T₁ = P₂V₂/T₂  

V₂ =  P₁V₁T₂/T₁ P₂

V₂ = 0.86 atm× 5.5 L × 273 K / 293 k × 1 atm

V₂ = 1291.29 atm.K.L / 293 k.atm

V₂ = 4.4 L

Answer:

A) Sample B has more calcium carbonate molecules

Explanation:

M = Molar mass of calcium carbonate = 100.0869 g/mol

[tex]N_A[/tex] = Avogadro's number = [tex]6.022\times 10^{23}\ \text{mol}^{-1}[/tex]

For the 4.12 g sample

Moles of a substance is given by

[tex]n=\dfrac{m}{M}\\\Rightarrow n=\dfrac{4.12}{100.0869}\\\Rightarrow n=0.0411\ \text{mol}[/tex]

Number of molecules is given by

[tex]nN_A=0.0411\times 6.022\times 10^{23}=2.48\times 10^{22}\ \text{molecules}[/tex]

For the 19.37 g sample

[tex]n=\dfrac{19.37}{100.0869}\\\Rightarrow n=0.193\ \text{mol}[/tex]

Number of molecules is given by

[tex]nN_A=0.193\times 6.022\times 10^{23}=1.16\times 10^{23}\ \text{molecules}[/tex]

[tex]1.16\times 10^{23}\ \text{molecules}>2.48\times 10^{22}\ \text{molecules}[/tex]

So, sample B has more calcium carbonate molecules.

The ratio of the elements of carbon, oxygen, calcium atoms, ions, has to be same in both the samples otherwise the samples cannot be considered as calcium carbonate. Same is applicable for impurities. If there are impurites then the sample cannot be considered as calcium carbonate.

Answer:

The temperature of the water decreases and so the reaction is endothermic

Explanation:

This option is correct because when the 5.0g potassium chloride (KCl) was added to the 100.0ml distilled water, the KCl made the water absorb heat coming from it which made the water decrease in temperature thereby causing an endothermic reaction.

An endothermic reaction actually takes place when the temperature of a system which is isolated decreases. The surroundings of a non-isolated system actually gains heat. While in an exothermic reaction, the temperature of a system increases due to the release or evolution of heat. This heat is released into the surroundings.

Answer:

Metalloids and ions

Explanation:

Mercury is not solid at room temperature. (Metals)

Many nonmetals aren't good at conducting electricity. Oxygen for example. (Nonmetals)

Metalloids are always solid at room temp and are fair conductors. (Metalloids)

Ions are same as metalloids. (Ions)

PLS GIVE BRAINLIEST

Answer:

C |||| It is not practical because it takes a huge amount of water to produce a new pair of jeans

Explanation:

If you're doing flvs then it's C.

Answer:

C!

Explanation:

i got it right on the test UwU

Answer:

16.00 g/mol

Explanation:

Answer:

16.00 g/mol

Explination:

1 mol of calcium phosphate contains 8 moles of oxygen. From this, we can compute for the amount of oxygen in grams using the molar mass of oxygen, which is 16.00 g/mol.

Answer:

MgS Magnesium sulfide

Answer:

[tex]M_{acid}=0.08892M[/tex]

Explanation:

Hello!

In this case, since the reaction between arsenic acid and potassium hydroxide is:

[tex]H_3AsO_4+3KOH\rightarrow K_3AsO_4+3H_2O[/tex]

Thus, since the mole ratio between the acid and the base is 1:3, at the equivalence point we can write:

[tex]3n_{acid}=n_{base}[/tex]

That in terms of molarities and volumes is:

[tex]3M_{acid}V_{acid}=M_{base}V_{base}[/tex]

Thus, the concentration of the arsenic acid is:

[tex]M_{acid}=\frac{M_{base}V_{base}}{3V_{acid}}=\frac{0.1894M*35.21mL}{3*25.00mL} \\\\M_{acid}=0.08892M[/tex]

Best regards!

The concentration (M) of arsenic acid in a solution of 25.00 mL is 0.088M.

Molarity of any solution will be calculated as:

M = n/V, where

V = volume

n is the moles and it will be calculated as:
n = W/M, where

W = given mass

M = molar mass

Given chemical reaction is:

H₃AsO₄ + 3KOH → K₃AsO₄ + 3H₂O

Moles of 35.21 mL of 0.1894 M KOH will be calculated as:

n = (0.1894)(0.035) = 0.0066 moles

From the stoichiometry of the reaction it is clear that:

1 mole of H₃AsO₄ = react with 3 moles of KOH

0.0066 moles of KOH = react with 1/3×0.0066= 0.0022 moles of H₃AsO₄

Now we calculate the molarity of H₃AsO₄ in 25mL of solution as:

M = 0.0022/0.025 = 0.088 M

Hence, required molarity is 0.088 M.

To know more about molarity, visit the below link:

https://brainly.com/question/26873446

Answer:

Explanation:

average kinetic energy of a gas molecule really only depends on the temperature, so which ever container is at the highest temperature is the answer

In comparison to other fundamental states of matter, plasma has the highest kinetic energy. This is due to the fact that particles in a plasma travel more quickly than those in a corresponding solid, liquid, or gas.

The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

The reason why molecules in gases have the largest kinetic energy is because they have more space between one another, experience less intermolecular force, and travel at a faster rate, which results in higher energy.

The temperature has a direct impact on the average kinetic energy of the particles inside a container.

Thus, In comparison to other fundamental states of matter, plasma has the highest kinetic energy.

To learn more about kinetic energy, follow the link;

https://brainly.com/question/15764612

#SPJ2

Answer:

okay I will help you just message me johnpatrick on messenger

Answer:

1,002.936 g

Explanation:

The combustion equation of each will be;

CH4 + 2O2 = CO2 + H2O

C3H8 + 5O2 = 3CO2 + 4H2O

We are told the mixture is 344g.

Thus;

For CH4 combustion;

Amount of CH4 = 0.336 × 344 = 115.584g

Molar mass of CH4 is 16 g/mol

Number of moles of CH4 is;

n = 115.584g/(16 g/mol)

n = 7.224 moles

n(CO2) = n(CH4) = 7.224 moles

For C3H8 combustion;

Amount of C3H8 = 0.664 × 344 = 228.416 g

Molar mass of C3H8 = 44 g/mol

Thus;

Number of moles of C3H8 = 228.416 g/(44 g/mol) = 5.19 mol

n(CO2) = 3n(C3H8) = 3 × 5.19 = 15.57 moles

Total moles of CO2 = 7.224 moles + 15.57 moles = 22.794 mol

Molar mass of CO2 = 44 g/mol

Thus amount of CO2 by mass = 22.794 mol × 44 g/mol = 1,002.936 g

Answer:

450 grams of Na2SO4

Explanation:

hope that helps

Answer:

[tex]ionization=1.74\%[/tex]

Explanation:

Hello!

In this case, since the degree of ionization of an acid is computed in terms of the concentration of hydrogen ions and the initial concentration of the acid:

[tex]ionization=\frac{[H^+]}{[HA]} *100\%[/tex]

Because the ionization reaction is represented by:

[tex]HA\rightleftharpoons H^++A^-[/tex]

Therefore, the degree or percent ionization turns out:

[tex]ionization=\frac{0.00417M}{0.240M} *100\%\\\\ionization=1.74\%[/tex]

Best regards!

Answer:

6.36  g AgCl

Hope this helps!

Answer:

the mole fraction of water in a solution is 0.17

Explanation:

The computation of the mole fraction of water in a solution is shown below:

Given that

Ethanol be 8.0 mol

And, the water be 1.6 mol

Based on the above information, the mole fraction of water in a solution is

= Water ÷ (Water + ethanol)

= 1.6 mol ÷ (1.6 mol + 8.0 mol)

= 1.6 mol ÷ 9.6 mol

= 0.17

Hence, the mole fraction of water in a solution is 0.17

Answer:

1.5 moles H₂O

General Formulas and Concepts:

Chemistry - Stoichiometry

Explanation:

Step 1: Define

RxN:   2H₂ + O₂ → 2H₂O

Given:   0.750 moles O₂

Step 2: Stoich

[tex]0.750 \ mol \ O_2(\frac{2 \ mol \ H_2O}{1 \ mol \ O_2} )[/tex] = 1.5 moles H₂O

Step 3: Check

We are given 3 sig figs.

Since our answer is 2 sig figs, we don't need to round.