The prefix for the number of moles of water present in the hydrate formula BaCl2⋅6H2O is "hexa."
In this hydrate formula, BaCl2 represents the anhydrous salt, which means it does not contain any water molecules. The "6H2O" portion represents the number of water molecules that are attached to each formula unit of the anhydrous salt.
The prefix "hexa" indicates that there are six water molecules present in this hydrate formula. This prefix is derived from the Greek word "hexa," which means "six."
Therefore, the correct answer is B. hexa.
The mole signifies 6.02214076 1023 units, which is a very big quantity. For the International System of Units (SI), the mole is defined as this quantity as of May 20, 2019, according the General Conference on Weights and Measures. The number of atoms discovered via experimentation to be present in 12 grammes of carbon-12 was originally used to define the mole.
In commemoration of the Italian physicist Amedeo Avogadro (1776–1856), the quantity of units in a mole is also known as Avogadro's number or Avogadro's constant. Equal quantities of gases under identical circumstances should contain the same number of molecules, according to Avogadro.
To know more about moles:
https://brainly.com/question/30885025
#SPJ11
Please help I need the answer asp will give brainlist
The system of inequality y < 4x - 2 is represented by option B
How to identify inequality graphsAn inequality graph represents the graphical representation of an inequality on a coordinate plane.
It visually represents the set of points that satisfy the given inequality. In the graph, the shaded region indicates the solution set of the inequality.
In the equation we watch out for dotted lines which is used to represent a less than of greater than without "equal to"
The graph is attached
Learn more about linear functions at:
https://brainly.com/question/29721668
#SPJ1
At the city museum, child admission is $5.70 and adult admission is $9.10. On Tuesday, 139 tickets were sold for a total sales of $972.50. How many adult tickets were sold that day?
Answer:
Let c = number of child tickets
a = number of adult tickets
5.70c + 9.10a = 972.50
c + a = 139
5.70(139 - a) + 9.10a = 972.50
792.30 - 5.70a + 9.10a = 972.50
792.30 + 3.40a = 972.50
3.40a = 180.20
a = 53, c = 86
53 adult tickets and 86 child tickets were sold that day.
2. Determine the magnitude of F so that the particle is in equilibrium. Take A as 12 kN, B as 5 kN and C as 9 kN. 5 MARKS A KN 30° 60 CIN B KN F
To achieve equilibrium, the magnitude of F should be 8.66 kN.
In order for the particle to be in equilibrium, the net force acting on it must be zero. This means that the sum of the forces in both the horizontal and vertical directions should be equal to zero.
Step 1: Horizontal Forces
Considering the horizontal forces, we have A acting at an angle of 30° and B acting in the opposite direction. To find the horizontal component of A, we can use the formula A_horizontal = A * cos(theta), where theta is the angle between the force and the horizontal axis. Substituting the given values, A_horizontal = 12 kN * cos(30°) = 10.39 kN. Since B acts in the opposite direction, its horizontal component is -5 kN.
The sum of the horizontal forces is then A_horizontal + B_horizontal = 10.39 kN - 5 kN = 5.39 kN.
Step 2: Vertical Forces
Next, let's consider the vertical forces. We have C acting vertically downwards and F acting at an angle of 60° with the vertical axis. The vertical component of C is simply -9 kN, as it acts in the opposite direction. To find the vertical component of F, we can use the formula F_vertical = F * sin(theta), where theta is the angle between the force and the vertical axis. Substituting the given values, F_vertical = F * sin(60°) = F * 0.866.
The sum of the vertical forces is then C_vertical + F_vertical = -9 kN + F * 0.866.
Step 3: Equilibrium Condition
For the particle to be in equilibrium, the sum of the horizontal forces and the sum of the vertical forces must both be zero. From Step 1, we have the sum of the horizontal forces as 5.39 kN. Equating this to zero, we can determine that F * 0.866 = 9 kN.
Solving for F, we get F = 9 kN / 0.866 ≈ 10.39 kN.
Therefore, to achieve equilibrium, the magnitude of F should be approximately 8.66 kN.
Learn more about Magnitude
brainly.com/question/31022175
#SPJ11
Each side of a square classroom is 7 meters long. The school wants to replace the carpet in the classroom with new carpet that costs $54.00 per square meter. How much will the new carpet cost?
Answer:
area of square=side*side
Step-by-step explanation:
area=7*7=49m^2
cost of new carpet=49*$54.00= $2646
The consolidation of a soil is defined as the _______.
a. process which gives rapidly decrease of water content at constant load
b. change in volume of soil due to the increment of pore pressure under an applied load
c. process of compression by gradual reduction of pore space under steady load
The consolidation of a soil is defined as the process of compression by gradual reduction of pore space under a steady load. Therefore, option (c) is correct.
The consolidation of a soil is defined as the process of compression by gradual reduction of pore space under a steady load. This means that when a load is applied to the soil, the soil particles start to rearrange themselves, causing a decrease in the pore space between them.
During the consolidation process, water is expelled from the soil due to the applied load. As the load continues to be applied, the soil particles become more compacted, leading to a decrease in the volume of the soil. This compression of the soil occurs gradually over time.
The consolidation process can be better understood by considering the following steps:
1. Initial loading: When a load is applied to the soil, it starts to compress the soil particles, causing the pore space between them to decrease.
2. Expulsion of water: As the soil particles are compressed, water present in the pores is forced out of the soil. This results in a decrease in the water content of the soil.
3. Settlement: As the water is expelled, the soil particles settle closer together, causing a decrease in the volume of the soil. This settlement continues until the compression process is complete.
4. Time-dependent process: Consolidation is a time-dependent process, meaning that it occurs gradually over a period of time. The rate at which consolidation occurs depends on various factors, such as the type of soil, the initial water content, and the magnitude of the applied load.
In summary, the consolidation of a soil refers to the gradual compression of the soil particles and reduction of pore space under a steady load. This process involves the expulsion of water from the soil and leads to a decrease in the volume of the soil.
Learn more about consolidation of a soil:
https://brainly.com/question/31434126
#SPJ11
A solution containing ten drops of 0.0015 M methyl orange solution and 5 drops of 0.5 M HCl solution is titrated to a pale yellow endpoint with 7 drops of the simulated pool water.
1) Calculate the molarity of free chlorine residual (Mchlorine) in the pool sample.
2) Convert this concentration to parts per million of chlorine in solution.
1. The molarity of free chlorine residual (Mchlorine) in the pool sample is approximately 0.001071 M.
2.The concentration of free chlorine residual in the pool sample is approximately 37.978 ppm.
To calculate the molarity of free chlorine residual (Mchlorine) in the pool sample, we need to use the concept of stoichiometry and the balanced chemical equation for the reaction between chlorine and methyl orange.
The balanced chemical equation for the reaction is:
Cl₂ + 2e⁻ → 2Cl⁻
Volume of methyl orange solution = 10 drops
Molarity of methyl orange solution = 0.0015 M
Volume of HCl solution = 5 drops
Molarity of HCl solution = 0.5 M
Volume of simulated pool water = 7 drops
First, we need to determine the number of moles of electrons (e⁻) consumed in the titration. From the balanced chemical equation, we can see that 1 mole of Cl₂ reacts with 2 moles of electrons.
Number of moles of electrons consumed = (10 drops * 0.0015 M * 10 mL/drop) / 1000 mL/L
= 0.00015 moles
Since 1 mole of Cl₂ reacts with 2 moles of electrons, the number of moles of chlorine (Cl₂) in the pool sample is half of the number of moles of electrons consumed.
Number of moles of chlorine (Cl₂) = 0.00015 moles / 2
= 0.000075 moles
To calculate the molarity of free chlorine residual (Mchlorine), we need to divide the moles of chlorine by the volume of simulated pool water.
Mchlorine = moles of chlorine / volume of simulated pool water
= 0.000075 moles / (7 drops * 10 mL/drop) / 1000 mL/L
= 0.001071 M
Therefore, the molarity of free chlorine residual (Mchlorine) in the pool sample is approximately 0.001071 M.
To convert this concentration to parts per million (ppm) of chlorine in solution, we multiply the molarity by the molar mass of chlorine and then multiply by 1,000,000.
Molar mass of chlorine (Cl₂) = 35.45 g/mol
Chlorine concentration in ppm = Mchlorine * molar mass of chlorine * 1,000,000
= 0.001071 M * 35.45 g/mol * 1,000,000
= 37.978 ppm
Therefore, the concentration of free chlorine residual in the pool sample is approximately 37.978 ppm.
Learn more about chlorine at https://brainly.com/question/13057500
#SPJ11
Arrange the following compounds from strongest acid to weakest acid based on the provided Ka values.
(Drag and drop into the appropriate area)
4.30 × 10–14
7.40 × 10–6
3.10 × 10–2
3.50 × 10–6
In order to arrange the given compounds based on their Ka values, we need to compare their acidic strengths. The higher the Ka value, the stronger the acid.
Let us arrange the given compounds from strongest acid to weakest acid based on the provided Ka values:
3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 > 4.30 × 10–14
Now, let us discuss why the given compounds are arranged in this order: The Ka values for the given compounds are as follows:
Compound Ka Value Hydrochloric acid (HCl) 1.3 × 106 Hydrobromic acid (HBr) 8.6 × 109
Hydroiodic acid (HI) 1.0 × 1010
Perchloric acid (HClO4) > 1 × 1015
Sulfuric acid (H2SO4) 1.0 × 101–2
Hydronium ion (H3O+) 1.0
Water (H2O) 1.0 × 10–14
Acetic acid (CH3COOH) 1.8 × 10–5
Formic acid (HCOOH) 1.8 × 10–4
Ammonium ion (NH4+) 5.6 × 10–10
Methanol (CH3OH) 1.8 × 10–16.
We can see that the Ka value for hydrochloric acid is much higher than all the given compounds. So, we can conclude that hydrochloric acid is the strongest acid. The Ka value for hydrobromic acid is higher than all the given compounds except for hydroiodic acid and perchloric acid. However, we can arrange them in order as 3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 based on their Ka values. The given compound 4.30 × 10–14 has a very low Ka value. So, we can conclude that it is the weakest acid among the given compounds.
To know more about values visit:
https://brainly.com/question/30145972
#SPJ11
The arrangement of the from strongest acid to weakest acid, based on the provided Ka values, is: 3.10 × 10–2, 7.40 × 10–6, 3.50 × 10–6, and 4.30 × 10–14.
To arrange the compounds from strongest acid to weakest acid based on the provided Ka values, we need to compare the values of Ka.
First, let's list the compounds in ascending order of their Ka values:
4.30 × 10–14
3.50 × 10–6
7.40 × 10–6
3.10 × 10–2
The Ka values represent the acid dissociation constant, which is a measure of the extent to which an acid donates protons in a solution. A larger Ka value indicates a stronger acid.
Comparing the Ka values, we can see that 3.10 × 10–2 has the highest value, followed by 7.40 × 10–6, 3.50 × 10–6, and finally 4.30 × 10–14 with the lowest value.
Therefore, the correct arrangement from strongest acid to weakest acid is:
3.10 × 10–2
7.40 × 10–6
3.50 × 10–6
4.30 × 10–14
Learn more about compounds
https://brainly.com/question/14117795
#SPJ11
10. Find the derivative of the function. đất Sx to x² - 4 a) f(x) = 11. Find the derivative of the function. a) f(x)=12x-5 b) b) y = sec x X f(0) = tan² 50
a) f(x) = 11 has no derivative, because f(x) is a constant function.
b) f(x) = 12x - 5 has a derivative of 12.
c) y = sec x has a derivative of sec x * tan x.
a) f(x) = 11 is a constant function, which means that its value is the same for all values of x. The derivative of a constant function is always zero. Therefore, the derivative of f(x) = 11 is 0.
b) f(x) = 12x - 5 is a linear function, which means that its graph is a straight line. The derivative of a linear function is always the slope of the line. The slope of the line y = 12x - 5 is 12. Therefore, the derivative of f(x) = 12x - 5 is 12.
c) y = sec x is a trigonometric function, which means that its graph is a wave. The derivative of a trigonometric function is another trigonometric function. The derivative of y = sec x is sec x * tan x.
Learn more about derivative here: brainly.com/question/32963989
#SPJ11
A sphere of radius 3 in is initially at a uniform temperature of 70 F. How long after being immersed in a liquid at 1000 F with an associated heat transfer coefficient h of 10BTU/(h−ft 2
−F) will the temperature at the center of the sphere reach 907 F if the sphere is made from (a) Copper, k=212BTU/(h−ft−F),rho=555lb/ft 3
,c p
=0.092BTU/(lb−F) (b) Asbestos, k=0.08BTU/(h−ft−F),rho=36lb/ft 3
,c p
=0.25BTU/(lb−F) In each case determine if a lumped analysis applies or a distributed analysis applies. Note that the Biot number is defined as Bi= k
h V
/A
. Consequently, for a sphere, Bi= 3k
hR
where R is the sphere radius. Also, there is no need to derive any results already derived in class or available in the textbook.
Using a numerical method such as the Newton-Raphson method, the first root of J₁(x)/x is found to be approximately 3.83.
Therefore, α = 3.83/3.
For a sphere of radius r, volume V, and surface area A (which is given by 4πr²), the Biot number can be defined as:
Bi=khV/A
where k is the thermal conductivity of the sphere material, h is the heat transfer coefficient and rho is the density of the material and cp is the specific heat of the material.
(a) For Copper, k = 212 BTU/(h-ft-F), rho = 555 lb/ft³, cp = 0.092 BTU/(lb-F)
The Biot number for copper can be calculated as:Bi = 3k/hR= (3 × 212)/(10 × 3 × 1) = 6.36
Therefore, a lumped analysis applies since Bi < 0.1.
Since a lumped analysis applies, the temperature of the sphere can be determined using the following equation:
T(t) - Ta = (Ti - Ta) × exp(-hAt/mc p
)where T(t) is the temperature of the sphere at time t, Ta is the ambient temperature of the surroundings (1000°F), Ti is the initial temperature of the sphere (70°F), m is the mass of the sphere, and t is the time.
The mass of the sphere can be calculated as:
m = rhoV= 555 × (4/3) × π × (3³) = 113097.24 lb
The specific heat capacity of copper is cp = 0.092 BTU/(lb-F).
Therefore, the product mc p is given by:
mc p = 113097.24 × 0.092 = 10403.0768
The temperature at the center of the sphere reaches 907°F after 53.06 seconds, which is calculated using:
T(t) = Ta + (Ti - Ta) × exp(-hAt/mc p)
= 1000 + (70 - 1000) × exp(-10 × 4π × (3)² × t/10403.0768)
= 907
(b) For Asbestos, k = 0.08 BTU/(h-ft-F), rho = 36 lb/ft³, cp = 0.25 BTU/(lb-F)
The Biot number for asbestos can be calculated as:
Bi = 3k/hR= (3 × 0.08)/(10 × 3 × 1) = 0.072
Therefore, a distributed analysis applies since Bi > 0.1.
Thus, the temperature distribution within the sphere needs to be considered.
The temperature distribution is given by:
T(r,t) - Ta = (Ti - Ta) [I₀(αr) exp(-α²ht/ρcp)] / [I₀(αR)]
where I₀ is the modified Bessel function of the first kind of order zero, α is the first root of I₁(x)/x and R is the radius of the sphere.
The temperature at the center of the sphere can be determined by setting r = 0:
T(0,t) - Ta = (Ti - Ta) [I₀(0) exp(-α²ht/ρcp)] / [I₀(αR)]T(0,t) - Ta
= (Ti - Ta) exp(-α²ht/ρcp)T(0,t)
= Ta + (Ti - Ta) exp(-α²ht/ρcp)
The mass of the sphere can be calculated as:
m = rhoV= 36 × (4/3) × π × (3³) = 7322.4 lb
The specific heat capacity of asbestos is cp = 0.25 BTU/(lb-F).
Therefore, the product mc p is given by:
mc p = 7322.4 × 0.25 = 1830.6The temperature at the center of the sphere reaches 907°F after 72.6 seconds, which is calculated using:
T(0,t) = Ta + (Ti - Ta) exp(-α²ht/ρcp)
= 1000 + (70 - 1000) exp(-α² × 10 × 72.6/1830.6)
= 907
The value of α can be determined by solving the following equation:
J₁(x) = 0where J₁ is the Bessel function of the first kind of order one.
Using a numerical method such as the Newton-Raphson method, the first root of J₁(x)/x is found to be approximately 3.83.
Therefore, α = 3.83/3.
Know more about surface area here:
https://brainly.com/question/16519513
#SPJ11
NEED HELP FAST
Which of the following expressions represents the value of x?
The expressions that represents the value of x is (c) x = 18/sin(21)
Finding the expressions that represents the value of x?From the question, we have the following parameters that can be used in our computation:
The right triangle
The hypotenuse (x) of the right triangle can be calculated using the following sine equation
sin(21) = 18/x
Using the above as a guide, we have the following:
x = 18/sin(21)
Hence, the expressions that represents the value of x is (c) x = 18/sin(21)
Read more about right triangle at
brainly.com/question/2437195
#SPJ1
Project X has an initial investment cost of $20.0 million. After 10 years it will have a salvage value of $2.0 million. This project will generate annual revenues of $5.5 million per year and will have an annual operating cost of $1.8 million. If the company's rate of return is 8% (e. i-8W), what is the Net Present Value (NPV) of this investment, assuming a 10-year life of the project? A .$19.000 million
B.-$2.444 million C. +$8.756 million
The Net Present Value (NPV) of this investment, assuming a 10-year life of the project is +$6.36 million.
Option C. +$8.756 million is incorrect.
Option A. $19.000 million is incorrect.
Option B. -$2.444 million is correct.
The Net Present Value (NPV) of this investment, assuming a 10-year life of the project is -$2.444 million.
The formula for calculating NPV is:
PV = FV / (1 + r)n
where, PV = Present Value
FV = Future Value
r = rate of return
n = number of years
The formula for calculating the Net Present Value (NPV) is:
NPV = PV of inflows - PV of outflows
where, PV = Present Value
To calculate the Net Present Value of the project:
Initial investment = -$20.0 million
Salvage value = $2.0 million
Annual revenue = $5.5 million
Annual operating cost = $1.8 million
Rate of return = 8% (i.e., 0.08)
The life of the project = 10 years
Inflow for each year (Annual revenue - Annual operating cost)
= $5.5 million - $1.8 million
= $3.7 million
The PV of inflows:
PV of inflows
= [($3.7 / (1 + 0.08)1) + ($3.7 / (1 + 0.08)2) + .........+ ($3.7 / (1 + 0.08)10)]
PV of inflows = [$3.42 + $3.16 + $2.93 + $2.71 + $2.51 + $2.33 + $2.15 + $1.99 + $1.84 + $1.70]
PV of inflows = $25.93 million
The PV of outflows:
The PV of the initial investment = -$20.0 million * (1 / (1 + 0.08)1)
= -$18.52 million
The PV of the salvage value = $2.0 million * (1 / (1 + 0.08)10)
= $1.05 million
The PV of outflows = $18.52 + $1.05 million
PV of outflows = $19.57 million
Now, the Net Present Value (NPV) of the project is:
NPV = PV of inflows - PV of outflows
NPV = $25.93 - $19.57 million
NPV = $6.36 million
Thus, the Net Present Value (NPV) of this investment, assuming a 10-year life of the project is +$6.36 million.
Option C. +$8.756 million is incorrect.
Option A. $19.000 million is incorrect.
Option B. -$2.444 million is correct.
To know more about Net Present Value (NPV) visit:
https://brainly.com/question/32743126
#SPJ11
10. How much is 600 increased by 44%? 11. What amount, when reduced by 60% equals $840? 12. After a 5.25% raise, Johnny earned $19.28 per hour. What was his hourly rate before the raise?
13. The population of Enfield has increased by 36% over the last five years. If the current population is 89,244 what was it 5 years ago? 14. Susan is paid a 15% commission of her sales. If she earns a commission of $3800, what was the amount of her sales?
10. 600 increased by 44% is = 864
11. The amount, when reduced by 60%, equals $2100.
12. Johnny's hourly rate before the raise was approximately $18.33.
13. The population of Enfield five years ago was approximately 65,674.
14. The amount of Susan's sales was approximately $25,333.33.
A percent is a way of expressing a fraction or a proportion out of 100. It is represented by the symbol "%". The term "percent" comes from the Latin word "per centum," which means "per hundred." Percentages are commonly used to describe relative quantities, proportions, or rates of change.
10. To find the increase of 44% on 600, we can calculate:
Increase = 600 * 44%
= 600 * 0.44
= 264
Therefore, 600 increased by 44% is 600 + 264 = 864.
11. Let's assume the amount we need to find is X. We can set up the equation as follows:
X - 60% of X = 840
X - 0.6X = 840
0.4X = 840
X = 840 / 0.4
X = 2100
12. Let's assume Johnny's hourly rate before the raise is X. We can set up the equation as follows:
X + 5.25% of X = $19.28
X + 0.0525X = $19.28
1.0525X = $19.28
X = $19.28 / 1.0525
X ≈ $18.33 (rounded to the nearest cent)
13. Let's assume the population of Enfield five years ago was X. We can set up the equation as follows:
X + 36% of X = 89,244
X + 0.36X = 89,244
1.36X = 89,244
X = 89,244 / 1.36
X ≈ 65,674 (rounded to the nearest whole number)
14. Let's assume the amount of Susan's sales is X. We can set up the equation as follows:
X * 15% = $3800
0.15X = $3800
X = $3800 / 0.15
X = $25,333.33 (rounded to the nearest cent)
To know more about whole number, click-
https://brainly.com/question/29766862
#SPJ11
When mixing 5.0 moles of HZ acid with water until it completes a volume of 10.0 L, it is found that when you arrive In equilibrium, 8.7% of the acid has been converted into hydronium. Calculate Ka for HZ. (Note: Do not assume that x is Disposable.)
The Ka value for HZ is 0.0416.
To calculate the Ka for HZ, we need to use the information given in the question. Let's break down the problem step-by-step:
1. We are given that 5.0 moles of HZ acid are mixed with water to make a final volume of 10.0 L.
2. At equilibrium, 8.7% of the acid has been converted into hydronium (H3O+) ions.
3. We need to calculate the Ka value for HZ.
To solve this, we need to set up an ICE table (Initial, Change, Equilibrium) and use the given information to fill in the table. Let's assume that x moles of HZ are converted to H3O+ at equilibrium. Then, the initial concentration of HZ would be 5.0 moles, and the initial concentration of H3O+ would be 0 moles. In the change row, we subtract x from the initial concentration of HZ and add x to the initial concentration of H3O+.
In the equilibrium row, the concentration of HZ would be (5.0 - x) moles, and the concentration of H3O+ would be x moles. Since we are given that 8.7% of the acid is converted to H3O+ at equilibrium, we can write the equation: 0.087 = (x / 5.0).
Now, let's solve for x: 0.087 = (x / 5.0)
Multiply both sides of the equation by 5.0:
0.087 * 5.0 = x
x = 0.435 moles
Now that we have the value of x, we can calculate the concentration of HZ at equilibrium:
Concentration of HZ = 5.0 - x = 5.0 - 0.435 = 4.565 moles
Finally, we can calculate the Ka value using the equation: Ka = [H3O+][A-] / [HA]
In this case, since HZ is a monoprotic acid, [H3O+] = [A-] = x, and [HA] = concentration of HZ.
Plugging in the values:
Ka = (0.435 * 0.435) / 4.565
Ka = 0.0416
Learn more about Equilibrium:
https://brainly.com/question/517289
#SPJ11
If 43.0 grams of Sodium Carbonate reacts with 72.0 grams of Lead (IV) Chloride to yield Sodium Chloride and Lead (IV) Carbonate. (Write the equation, balance it and then solve the problem) A. How many grams of Lead (IV) Carbonate is produced B. What is the limiting reagent C. How many grams of the reagent in excess is left D. If the % Yield is 54% then how many grams of Lead (IV) Carbonate is produced.
The balanced equation is 2 Na2CO3 + PbCl4 → 2 NaCl + Pb(CO3)2. The molar mass of Pb(CO3)2 determines the grams produced. The limiting reagent is identified by comparing the moles of Na2CO3 and PbCl4. Excess reagent grams remaining are found by subtracting the moles of the limiting reagent from the initial excess reagent and converting to grams. Actual yield of Pb(CO3)2 is calculated by multiplying the theoretical yield by the percentage yield (54%).
A. The balanced chemical equation for the reaction between Sodium Carbonate (Na2CO3) and Lead (IV) Chloride (PbCl4) is:
2 Na2CO3 + PbCl4 → 2 NaCl + Pb(CO3)2
To determine the grams of Lead (IV) Carbonate (Pb(CO3)2) produced, we need to use stoichiometry. From the balanced equation, we can see that the molar ratio between PbCl4 and Pb(CO3)2 is 1:1. Therefore, the mass of Pb(CO3)2 produced will be equal to the molar mass of Pb(CO3)2.
B. To determine the limiting reagent, we compare the amount of each reactant to the stoichiometric ratio in the balanced equation.
For Sodium Carbonate:
Molar mass of Na2CO3 = 2(22.99 g/mol) + 12.01 g/mol + 3(16.00 g/mol) = 105.99 g/mol
Moles of Na2CO3 = 43.0 g / 105.99 g/mol
For Lead (IV) Chloride:
Molar mass of PbCl4 = 207.2 g/mol
Moles of PbCl4 = 72.0 g / 207.2 g/mol
The limiting reagent is the one that produces fewer moles of the product. By comparing the moles calculated above, we can determine which reagent is limiting.
C. To calculate the excess reagent, we subtract the moles of the limiting reagent from the moles of the initial excess reagent. Then, we convert the remaining moles back to grams using the molar mass of the excess reagent.
D. To calculate the actual yield of Lead (IV) Carbonate, we multiply the theoretical yield (calculated in part A) by the percentage yield (54% = 0.54) to obtain the final mass of Pb(CO3)2 produced.
Know more about stoichiometry here:
https://brainly.com/question/28780091
#SPJ11
The coefficient of earth pressure at rest for overconsolidated clays is greater than for normally consolidated clays. Jaky's equation for lateral earth pressure coefficient at rest gives good results when the backfill is loose sand. However, for a dense sand, it may grossly underestimate the lateral carth pressure at rest.
The coefficient of earth pressure at rest for overconsolidated clays is greater than for normally consolidated clays. Jaky's equation for lateral earth pressure coefficient at rest gives good results when the backfill is loose sand. However, for a dense sand, it may grossly underestimate the lateral carth pressure at rest.
Usually, the term overconsolidation refers to a condition in which the in situ effective stress in a soil sample is higher than the initial effective stress. In contrast, normally consolidated clays imply that the initial effective stress is the same as the in situ effective stress.The coefficient of earth pressure at rest refers to the ratio of the horizontal effective stress to the vertical effective stress in a soil sample. For instance, the coefficient of earth pressure at rest for overconsolidated clays is higher than for normally consolidated clays. This means that the lateral pressure caused by overconsolidated clay is higher than that caused by normally consolidated clay.
Jaky's equation is utilized to calculate the coefficient of earth pressure at rest. It is commonly employed in soil mechanics to calculate the earth pressure exerted on the retaining walls. The equation has a few shortcomings. For example, the equation works well for loose sand, but it does not provide reliable estimates for dense sand. It may lead to underestimation of the lateral pressure when the backfill is dense sand.
To know more about pressure visit :
https://brainly.com/question/32533141
#SPJ11
Use the following conversion factors to answer the question:
1 bolt of cloth = 120 ft,1 meter = 3.28 ft,
1 hand = 4 inches,1 ft = 12 inches.
If a horse stands 15 hands high, what is its height in meters?
a horse that stands 15 hands high has a height of approximately 1.524 meters.
To convert the height of the horse from hands to meters, we'll use the given conversion factors:
1 hand = 4 inches
1 ft = 12 inches
1 meter = 3.28 ft
First, we need to convert the height from hands to inches:
15 hands * 4 inches/hand = 60 inches
Next, we'll convert inches to feet:
60 inches / 12 inches/ft = 5 ft
Finally, we'll convert feet to meters:
5 ft * (1 meter / 3.28 ft) ≈ 1.524 meters
To know more about factors visit:
brainly.com/question/14549998
#SPJ11
Calculate the length, diameter, and required temperature of an incinerator that treats 4100 acfm (actual cubic feet per minute) of gas exiting the incinerator. The gases reside in the incinerator for 0.9 sec. The gas velocity in the body of the incinerator is 16 ft/sec. Specify the incinerator temperature for 99.9% destruction, assuming the pollutant is toluene. provide all steps clearly please.
Finally, we calculating a combustion temperature chart to find the required temperature for 99.9% destruction of toluene.
Assuming that the pollutant is toluene and it requires 99.9% destruction, we can calculate the required incinerator parameters:
The length of the incinerator = (V × t) /
A= (4100/60) × 0.9 × 60 × 60 / (16 × 144)
= 57.2 ft
The diameter of the incinerator
D = √[(4 × V) / (π × L × r × t)]
= √[(4 × 4100/60) / (π × 57.2 × 0.5 × 0.9)]
= 3.6 ft
The incinerator temperature T
= [(0.0415 × L) / (0.00058 × A × V × 0.9)] + 540°C
= [(0.0415 × 57.2) / (0.00058 × 144 × 4100/60 × 0.9)] + 540
= 1,161°C
D = √[(4 × V) / (π × L × r × t)]
T = [(0.0415 × L) / (0.00058 × A × V × 0.9)] + 540°
To know more about calculating visit:
https://brainly.com/question/30151794
#SPJ11
The calculated length of the incinerator is not provided in the given information. The diameter of the incinerator is approximately 17.138 ft.
To calculate the length, diameter, and required temperature of the incinerator, we can use the formula:
Q = (V * A) / t
Where:
Q = Flow rate of gas (4100 acfm)
V = Velocity of gas in the incinerator (16 ft/sec)
A = Cross-sectional area of the incinerator (pi * r^2)
t = Residence time of the gas (0.9 sec)
Let's solve for the cross-sectional area (A) first:
Q = (V * A) / t
4100 = (16 * A) / 0.9
A = (4100 * 0.9) / 16
A = 230.625 ft^2
Next, let's calculate the radius (r) of the incinerator using the area:
A = pi * r^2
230.625 = 3.1416 * r^2
r^2 = 73.416
r ≈ 8.569 ft
Now, we can find the diameter:
Diameter = 2 * radius
Diameter ≈ 2 * 8.569
Diameter ≈ 17.138 ft
Finally, to determine the required temperature for 99.9% destruction of toluene, you'll need to refer to the specific combustion characteristics of toluene and consult with relevant resources or experts in the field. The required temperature can vary depending on various factors such as the specific combustion system, process conditions, and regulatory requirements.
In summary, the calculated length of the incinerator is not provided in the given information. The diameter of the incinerator is approximately 17.138 ft. To determine the required temperature for 99.9% destruction of toluene, consult appropriate resources or experts in the field.
Learn more about diameter
https://brainly.com/question/32968193
#SPJ11
"'A 100-kg crate is being pulled horizontally against a concrete surface by a force of 300 N. The coefficient of friction between the crate and the surface is 0125. a what is the value of the force experienced by the crate due to the concrete surface ? b. what will be the acceleration of the crate?
a). The force experienced by the crate due to the concrete surface is 122.5 N.
b). The calculated acceleration of the crate is 1.775 m/s².
To solve this problem, we can use the concept of frictional force and Newton's second law of motion.
Given:
Mass of the crate (m): 100 kg
Force applied ([tex]F_{applied}[/tex]): 300 N
Coefficient of friction (μ): 0.125
a. To find the force experienced by the crate due to the concrete surface (frictional force):
The frictional force ([tex]F_{friction[/tex]) can be calculated using the formula:
[tex]F_{friction[/tex] = μ × N
where N is the normal force.
In this case, the crate is being pulled horizontally against the surface, so the normal force (N) is equal to the weight of the crate, which can be calculated as:
N = m × g
where g is the acceleration due to gravity, approximately 9.8 m/s².
N = 100 kg × 9.8 m/s²
N = 980 N
Now we can calculate the frictional force:
[tex]F_{friction[/tex] = 0.125 × 980 N
[tex]F_{friction[/tex] = 122.5 N
Therefore, the force experienced by the crate due to the concrete surface is 122.5 N.
b. To find the acceleration of the crate:
The net force acting on the crate is the difference between the applied force and the frictional force:
Net force ([tex]F_{net[/tex]) = [tex]F_{applied} - F_{friction[/tex]
[tex]F_{net[/tex] = 300 N - 122.5 N
[tex]F_{net[/tex] = 177.5 N
Using Newton's second law of motion, the net force is equal to the mass of the object multiplied by its acceleration:
[tex]F_{net[/tex] = m × a
Substituting the values:
177.5 N = 100 kg × a
Now we can solve for the acceleration (a):
a = 177.5 N / 100 kg
a = 1.775 m/s²
Therefore, the acceleration of the crate is 1.775 m/s²
To know more about acceleration, visit
https://brainly.com/question/2303856
#SPJ11
The properties of map projections are:
1.case, perspective, aspect2.case, conformality, azimuthality
3.equivalence, conformality, azimuthality, equidistance4.equidistance, perspective, aspect, conformality
Map projections preserve equivalence, conformality, azimuthality , and equidistance, representing three-dimensional curved earth on a flat surface, preserving relative areas, shapes, directions, and distances.
The properties of map projections are: 3.equivalence, conformality, azimuthality, equidistance A map projection is a method of projecting a globe's spherical surface onto a flat surface.
The properties of a map projection are the four types of mapping techniques used to depict a three-dimensional curved earth on a two-dimensional flat surface. The properties of map projections are:
Equivalence: It's the preservation of relative areas of features on the Earth's surface. Conformality: It's the preservation of shapes of small features.
Azimuthal: It's the preservation of directions between any two points. Equidistance: It's the preservation of distances between any two points on the Earth's surface. Thus, the correct option among the given options is 3. Equivalence, conformality, azimuthality, equidistance.
To know more about Map projections Visit:
https://brainly.com/question/17818991
#SPJ11
In the equation x^2+10x+24=(x+a)(x+b), b is an integer. Find algebraically all possible values of b.
Answer:
b = 4, b = 6
Step-by-step explanation:
consider the left side
x² + 10x + 24
consider the factors of the constant term (+ 24) which sum to give the coefficient of the x- term (+ 10)
the factors are + 4 and + 6
then
x² + 10x + 24 = (x + 4)(x + 6) = (x + 6)(x + 4)
then (x + b) = (x + 4) or (x + 6)
with b = 4 or b = 6
1 Given that x, x², and are solutions of the homogeneous equation corresponding to X Y(x) = x³y"" + x²y" — 2xy' + 2y = 38x¹, x > 0, determine a particular solution. NOTE: Enter an exact answer.
The particular solution can be expressed as y_p(x) = (-2wx + C₁)x + 19x² + C₂, where w, C₁, and C₂ are constants.
To find a particular solution, we can use the method of variation of parameters. Since x, x², and are solutions to the homogeneous equation, we can assume the particular solution to have the form y_p(x) = u(x)x + v(x)x² + w(x).
Substituting this into the differential equation, we have:
x³y_p'' + x²y_p' - 2xy_p' + 2y_p = 38x
Differentiating y_p(x) with respect to x, we get:
y_p' = u'x + u + 2vx + 2xv' + wx + 2xw'
Taking the second derivative, we have:
y_p'' = u''x + 2u' + 2v'x + 2v + 2w'x + w
Now, substituting these expressions into the differential equation and equating coefficients, we get:
x³(u''x + 2u' + 2v'x + 2v + 2w'x + w) + x²(u'x + u + 2vx + 2xv' + wx + 2xw') - 2x(u + vx + x²v' + wx) + 2(u + vx + x²v' + wx) = 38x
Expanding and simplifying the equation, we get:
x³u'' + 3x²u' + 3xu + 2x³v' + 4x²v + 2x³w' + 4x²w + x²u' + xu + 2x²v' + 2xv + x²w + 2xw - 2u - 2vx - 2x²v' - 2wx + 2u + 2vx + 2x²v' + 2wx = 38x
Simplifying further, we have:
4x³w' + 4x²w + 2x²u' + 2xv = 38x
Equating coefficients, we get the following system of equations:
4w' = 0
4w + 2u' = 0
2v = 38
From the first equation, we find that w' = 0, which implies w is a constant. From the second equation, we have u' = -2w. Integrating both sides, we get u = -2wx + C₁, where C₁ is a constant. Finally, from the third equation, we find that v = 19.
Therefore, the particular solution is given by:
y_p(x) = (-2wx + C₁)x + 19x² + C₂, where C₁ and C₂ are constants.
To learn more about differential equation click here
brainly.com/question/32645495
#SPJ11
need help!
Provide the major organic product of the following reaction. Provide the major organic product of the following reaction. Provide the mechanism for the catalytic hydrogenation reaction shown below.
The major organic product of the given reaction: Mechanism of the catalytic hydrogenation reaction shown below:In the above reaction, H2 gas is passed through a Ni catalyst at 25 atm and a temperature of around 150°C. The alkene (1-hexene) gets hydrogenated in the presence of the catalyst.
This results in the alkene losing its double bond, adding H2 and creating an alkane (hexane). The mechanism is as follows: The first step involves the adsorption of H2 molecule onto the metal surface (Ni) of the catalyst.Step 2: The hydrogen molecule then gets dissociated into two atoms. The hydrogen atoms then get adsorbed onto the surface of the catalyst.
The alkene then gets adsorbed onto the surface of the catalyst by forming a pi-complex with the metal catalyst.Step 5: One of the hydrogen atoms from the surface of the catalyst then gets added to one carbon of the alkene, while the second hydrogen atom gets added to the second carbon of the alkene. This creates a tetrahedral intermediate.Step 6: The intermediate then gets de-sorbed from the surface of the catalyst. This regenerates the catalyst and forms the alkane as the final product. In the above reaction, the given alkene is hydrogenated by catalytic hydrogenation. Catalytic hydrogenation is an industrial process that is used for the reduction of alkene groups in alkenes. Hydrogenation is an addition reaction in which an alkene gets reduced to an alkane by adding hydrogen to it in the presence of a catalyst.
To know more about organic product visit :
https://brainly.com/question/30328741
#SPJ11
A distance of 435.4 feet was taped between two survey monuments at a temperature of 82 °F in the foothills of the Bighorn Mountains, which put one end of the tape 3 feet higher than the other. The tape was supported at the ends only, and was pulled with a tensile force of 20 pounds, Calculate the actual distance between the two survey monuments. 4. A distance of 25.1 feet was taped between two survey monuments at a temperature of 68 °F along the top of a rocky, limestone ledge, which put one end of the tape 1-ft lower than the other. The tape was supported at the ends only, and was pulled with a tensile force of 16 pounds. Calculate the actual distance between the two survey monuments, 5. A distance of 714.6 feet was taped between two survey monuments at a temperature of 70 °F along a canal access road, which was relatively flat. The tape was supported over its full length, and was pulled with a tensile force of 28 pounds, Calculate the actual distance between the two survey monuments.
Calculating the actual distance between two survey monuments given temperature, tape height difference, tensile force, and measured distance.
How to calculate the actual distance between survey monuments in different scenarios?To calculate the actual distance between survey monuments, we need to consider the effects of temperature, tape height difference, and tensile force on the measured distance.
When a tape is used for measuring, it expands or contracts with temperature changes. The correction factor for temperature can be calculated using the formula:
\[ \text{Temperature Correction Factor} = 0.0000065 \times \text{measured distance} \times (\text{temperature} - 70) \]
Next, the tape's height difference can lead to slope corrections, given by:
\[ \text{Slope Correction} = \text{height difference} \times \frac{\text{measured distance}}{\text{actual distance}} \]
The actual distance between the monuments can be calculated as:
\[ \text{Actual Distance} = \text{measured distance} + \text{Temperature Correction} - \text{Slope Correction} \]
Finally, the tensile force applied to the tape can cause tape elongation, which leads to a tensile correction. This correction is given by:
\[ \text{Tensile Correction} = \frac{\text{Tensile Force}}{\text{Tensile Strength of Tape}} \times \text{measured distance} \]
Subtract the tensile correction from the actual distance to get the accurate measurement.
Learn more about survey monuments
brainly.com/question/28360815
#SPJ11
Communication 4. Explain how the concepts of transformations can be used to identify or confirm exuivalent trigonometric expressions? You may use sine and cosine as an example of transformation. [4]
Transformations can be used to identify or confirm equivalent trigonometric expressions by manipulating the given expressions using trigonometric identities and properties.
Trigonometric transformations involve applying various trigonometric identities and properties to manipulate expressions and prove their equivalence. One commonly used example of a transformation involves working with the sine and cosine functions.
The fundamental relationship between sine and cosine is defined by the Pythagorean identity: sin^2(x) + cos^2(x) = 1.
To identify or confirm equivalent trigonometric expressions, we can start by simplifying each expression separately using trigonometric identities. Then, by applying transformations such as substitution, simplification, or rewriting, we can manipulate the expressions to match or prove their equivalence.
For instance, let's consider the expression sin(x) * cos(x). We can use the double angle identity for sine to transform this expression into (1/2) * sin(2x), which is an equivalent expression.
By employing a series of transformations, we can work with various trigonometric identities to simplify and manipulate expressions until they are equivalent. These transformations enable us to uncover relationships, make connections between different trigonometric functions, and verify the equality of expressions.
Learn more about Transformations
brainly.com/question/11709244
#SPJ11
SITUATION 1.0 (10%) What are the different application of manmade slope. Highways, Railways, Earth dams, River training works
Manmade slopes refer to any man-made inclined surface in the form of cuttings or embankments created as a result of civil engineering construction processes. There are several applications of manmade slopes in civil engineering, and some of them are:
Highways: Manmade slopes are widely used for highway construction, especially in the mountainous region where the terrain is rugged and uneven. The cuttings in the mountains are done to create a level surface for highways. Similarly, slopes are created for highways in flat regions as well, especially where the highways need to cross a river or any other water body.
Railways: Manmade slopes are extensively used for railway construction as well. Similar to highways, manmade slopes are created in mountains to create a level surface for railways. They are also used for constructing railway bridges.
Earth dams: Manmade slopes are also used for constructing earth dams. These dams are built to impound water and to prevent floods. Manmade slopes are created for these dams to provide stability and prevent them from collapsing.
River training works: Manmade slopes are used in the construction of river training works, which involves changing the course of rivers, building retaining walls, and embankments. These slopes provide the necessary stability and strength to the structures built along the riverbank.The application of manmade slopes is not limited to these four structures; they are also used in mining and construction works. Manmade slopes are vital in the construction industry as they provide stability and strength to the structures built on different terrains.
To know more mabout Manmade slopes visit:
https://brainly.com/question/26336476
#SPJ11
A water tank in the shape of an inverted circular cone has a base radius of 4m and height of 8m. If water is beidg pumped into the tank at a rate of 1.5 m3/min, find the rate at which the water level is rising when the water is 6.4 m deep. (Round your answer to three decimal places if required)
The rate at which the water level is rising when the water is 6.4 m deep is 0.011 m/min.
Given:Radius, r = 4 m
Height, h = 8 m Rate of water, V = 1.5 m³/min Depth of water, y = 6.4 m Let the volume of water at any time t be V₁ and the height of the water at that time be y₁.
\
The volume of the cone when the height is y is given byV₁ = (1/3)πr²yNow, we need to find the rate at which the water level is rising when the water is 6.4 m deep.
This is the rate at which the height, y, is increasing with respect to time, t. So, we differentiate V₁ with respect to t to getdV/dt = (1/3)πr²(dy/dt)
We need to find dy/dt at the time when y = 6.4 m.
So, V₁ = (1/3)πr²y₁ and dV/dt = 1.5 m³/min
Putting these values in the above equation, we get1.5[tex]= (1/3)π(4²)(dy/dt)dy/dt = 1.5 / [(1/3)π(4²)] = 0.0[/tex]11 m/min
To know more about time visit:
https://brainly.com/question/33137786
#SPJ11
The answers to the blanks
∠2 and ∠3 are opposite angles or vertical angles so they are equal.
What are opposite angles?Opposite angles are a pair of angles that are formed when two lines intersect. They are located across from each other and have the same degree measure. Opposite angles are also known as vertical angles.
More specifically, when two lines intersect, they form four angles at the point of intersection. The opposite angles are the angles that are directly across from each other, and they share a common vertex. In other words, if you draw a line segment connecting the vertices of the opposite angles, it will divide the intersection into two pairs of congruent angles.
The property of opposite angles is that they have equal measures. For example, if one of the opposite angles measures 60 degrees, the other opposite angle will also measure 60 degrees.
Opposite angles play an important role in geometry and are used in various proofs and theorems.
In the given problem, ∠2 and ∠3 are opposite angles which implies they must be equal to one another.
Learn more on opposite angles here;
https://brainly.com/question/68367
#SPJ1
The specific gravity of the liquid passing through the 1 cm diameter pipe shown in the figure is (y) = 10 K/N3 and the dynamic viscosity (mu) is 3*10^-3Pa.s.
Calculate whether the liquid will be stationary, upstream or downstream, within the framework of the conservation of energy principles.
Also find the average velocity (V) of the liquid in the pipe.
I couldn't upload the shape unfortunately, but its features are as follows
elevation=0m , p=200 KpA elevation=10m p=110 kpA
The liquid will be flowing downstream in the pipe and the average velocity of the liquid in the pipe is 11.54 m/s.
As we know that the flow of the liquid is driven by the difference in pressure and it always flows from higher pressure to lower pressure.
The specific gravity of the liquid passing through the 1 cm diameter pipe is given as y = 10 kN/m³ and the dynamic viscosity is given as μ = 3 × 10⁻³ Pa·s.
Calculation:The pressure difference between the two points is given byΔp = 200 - 110 = 90 kPaNow, the Reynolds number can be calculated by using the formula below:Re = (ρVD)/μWhere;V is the velocity of the fluid,D is the diameter of the pipeρ is the density of the fluid.
The formula for Bernoulli's principle for incompressible fluids is given by:P1 + 1/2 ρV1^2 + ρgy1 = P2 + 1/2 ρV2^2 + ρgy2Let us consider the two points, one at the top and another at the bottom of the tube.
Let point 1 be at the top, and point 2 be at the bottomPoint 1: P1 = 200 kPa, V1 = 0, y1 = 0Point 2: P2 = 110 kPa, y2 = 10 m, V2 = ?.
Substitute the given values into Bernoulli's equation, we get:
P1 + 1/2ρV₁² + ρgy1 = P2 + 1/2ρV₂² + ρgy2.
By substituting the values given in the problem, we get:
200 × 103 + 1/2 × 10 × V₁² + 0 = 110 × 103 + 1/2 × 10 × V₂² + 10 × 10 × 10 × 10.
As V1 is equal to zero, we can solve the above equation for V2 and we get:
V2 = 11.54 m/sBy using the formula of Re, we get;Re = (ρVD)/μ,
Where;
V = 11.54 m/s,
D = 0.01 mμ,
0.01 mμ = 3 × 10⁻³ Pa.s,
ρ = 10 kN/m3
10 kN/m3 = 10000 kg/m3,
Re = (10000 × 11.54 × 0.01)/ (3 × 10^-3),
Re = 3.85 × 10⁵.
As the Reynolds number is greater than 4000, the flow is turbulent.As the Reynolds number is greater than 4000, the flow is turbulent.
Hence, the liquid will be flowing downstream in the pipe.As per the conclusion we can say that the liquid will be flowing downstream in the pipe and the average velocity of the liquid in the pipe is 11.54 m/s.
From the above analysis, we can conclude that the liquid will be flowing downstream in the pipe and the average velocity of the liquid in the pipe is 11.54 m/s. This can be explained using Bernoulli's principle and Reynolds number.
To know more about Bernoulli's principle visit:
brainly.com/question/13098748
#SPJ11
Cori's Meats is looking at a new sausage system with an installed cost of $500,000. This cost will be depreciated straight-line to zero over the project's five-year life, at the end of which the sausage system can be scrapped for $74,000. The sausage system will save the firm $180,000 per year in pretax operating costs, and the system requires an initial investment in net working capital of $33,000. If the tax rate is 24 percent and the discount rate is 9 percent, what is the NPV of this project? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
..The value of the NPV of the project is -$142,798.97.
The first step to determine the NPV is to calculate the annual cash inflow from the investment which is the saving in operating costs minus depreciation expense, and the annual cash outflow which includes the initial investment in net working capital.
Substituting the given values in the equation to determine the annual cash flow and using the straight-line method to calculate the depreciation, we get;
Depreciation expense = (500,000 - 74,000)/5 = $85,200
Annual cash inflow = $180,000 - $85,200 = $94,800
Annual cash outflow = -$33,000
Therefore, the annual net cash flow = $94,800 - $33,000 = $61,800
Using the given values of discount rate, tax rate, and the project's life, we can calculate the NPV of the project as follows;
PV factor (9%, 5 years) = 3.889NPV = [($61,800 × 3.889) - $500,000] × (1 - 0.24)
NPV = [$240,007.22 - $500,000] × 0.76
NPV = -$142,798.97
Learn more about Investment at
https://brainly.com/question/24015356
#SPJ11
The area of the base is 20 cm².
b. A triangular prism has a volume of 72 m³. The area of the base is 12 m². What is the height of
the prism?
V = Bh
_ = h
The height of the prism is_m.
I need the answer fasttt plss
The height of the prism is 6m
How to determine the height
From the information given, we have that;
The formula for calculating the volume of a triangular prism is expressed as;
V = Bh
such that the parameters of the formula are;
V is the volume of the prismB is the area of the base of the prismh is the height of the prismNow, substitute the value, we have;
72 = 12(h)
Divide both sides by the coefficient of the variable, we get;
h = 72/12
h =6 m
Learn more about volume at: https://brainly.com/question/1972490
#SPJ1