Answer:
Chemical etching is a process of printed circuit board (PCB) manufacturing that provides many advantages over mechanical methods.
Explanation:
There's one! UvU hope this helped in whatever you're in for! <3
Good Luck!
a car travels west at 40 km/h
a man on a bike travels at 10 km/h
what is the speed of the car relative to the speed of the bicycle ?
Answer:
The car is going 0 km/h more than the bike
Explanation:
A train travels at a speed of 30mph and travelled a distance of 240 miles. How long did it take the train to complete its journey? Must show your work
Answer:
8
Explanation:
240 divided by 30 = 8
Where are alkaline earth metals found on the periodic table?
Group 1
Group 2
Groups 3–12
Group 17
Answer:
B
Explanation:
Answer:
B
Explanation:
I had a feeling
plz do all of it i will give brainlest and thanks to best answer
plz do it right
Answer:
d
Explanation:
because earth does have more water than land so it would be d
A computational model predicts the maximum kinetic energy a roller coaster car can have given its mass, the speed at the highest point of its journey, and the height of the highest point. The mass is 250 kg, and the highest point of the journey is at 30m, where the cart is at rest. What is the maximum kinetic energy?
A. 113500 J
B. 468750 J
C. 0 J
D. 73500 J
Answer:
D
Explanation:
The decrease in potential energy is equal to the increase in kinetic energy.
mgh
250 x 9.8 x 30
=73, 500
Answer:
73,500 J
Explanation:
100% Correct
how is an echo like a reflection?
Answer:
Echoes. An echo is a sound that is repeated because the sound waves are reflected back. Sound waves can bounce off smooth, hard objects in the same way as a rubber ball bounces off the ground. Although the direction of the sound changes, the echo sounds the same as the original sound.
Explanation:
Where is the deepest cave in the world? How far down is it located?
i need help asap please help fast
Answer:
Geology Notes
1 Veryovkina Cave 2212[1] 13.5 km (8.4 mi)[1] Abkhazia / Georgia 43°23′52″N 40°21′37″E.
Force towards the center of the earth
A. force caused by gravity/weight force
B. Normal force
C. Friction force
D. Tension force
E. Applied force
Answer:
answer is C
Explanation:
i just took the test
I mon runs a distance of 10km in 5 ms
he overage speed
Note: Your question inputs seem a little odd. But, I am assuming that you really mean '10km in 5 ms'.
Answer:
The Average speed = 15000 / 0.005 = 3000000 m/s
Explanation:
Average speed can be calculated by dividing the total distance covered by the total time.
Average speed = Total Distance / Total time
Given
Total distance = 15km = 15(1000) = 15000 m Total time = 5 ms = 0.005 seconds
Thus,
Average speed = Total Distance / Total time
Average speed = 15000 / 0.005 = 3000000 m/s
What two processes are part of electromagnetism? A. The production of a magnetic field by an electric current B. The production of a magnetic field by permanent magnets C. The attraction of electric charges for each other D. The production of an electric current by a moving magnet
Two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
Electromagnetism:
It is a branch of physics in which scientists study the electromagnetic force. Or in simple words studies the interaction of electric and magnetic field.
This includes the production of magnetic field from the electric current and electric current from moving magnet.
The study of magnetic field of a permanent magnet is part of magnetism while the attraction of electric charges by each other is studied under electrostatics.
Therefore, two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
To know more about Electromagnetism:
https://brainly.com/question/13803241
Question 4 of 10
Which option is a good blackbody radiator?
O A. A lightbulb
O B. A balloon
O C. A person
O D. A mirror
SUBM
Answer:
A lightbulb
Explanation:
Answer:
Lightbulb
Explanation: got it right
i'll give brainliest!!! please help asap!!!
Which of the following electromagnet will have the strongest force?
1: A battery with no loops or wire around the nail
2: A battery with 10 loops of wire around the nail
3: A battery with 3 loops of wire around the nail
4:A battery with 15 loops or wire around the nail
Answer:
4:A battery with 15 loops or wire around the nail
Explanation:
More loops equals more force
A battery with [tex]15[/tex] loops or wire around the nail have the stronger force.
So, option 4 is correct.
Define electromagnet.An electromagnet is a system that contains of a magnetic encircled by a coil that conducts an electric current to ionize the core.
Wherever controllable magnetism are required, such as in devices where the magnetic flux must be adjusted, reversed, or turned on and off, an electromagnet is utilized.
A battery with [tex]15[/tex] loops or wire around the nail have the stronger force.
So, option 4 is correct.
Find out more information about magnet here:
https://brainly.com/question/13026686?referrer=searchResults
Which pair of elements will form a covalent bond?
A. Aluminum and chlorine
B. Iithium and oxygen
C. Potassium and chlorine
D. Carbon and sulfur
Answer:
Aluminium and chlorine
Explanation:
Jenny puts a book on her desk. Jenny’s book has an area of 200 cm2.It exerts a pressure of 0.05 N/cm2 on the desk. What is the weight of the book? *
A chain has a mass of 10.0 kg. It is hanging freely, at rest, with one end connected to a ceiling hook.
What is the tension at the top of the chain?
What is the tension at the midpoint of the chain?
What is the tension at the bottom of the chain?
Answer:
Identify the object to be analyzed. For some systems in equilibrium, it may be necessary to consider more than one object. Identify all forces acting on the object. Identify the questions you need to answer. Identify the information given in the problem. In realistic problems, some key information may be implicit in the situation rather than provided explicitly.
Explanation:
Identify the object to be analyzed. For some systems in equilibrium, it may be necessary to consider more than one object. Identify all forces acting on the object. Identify the questions you need to answer. Identify the information given in the problem. In realistic problems, some key information may be implicit in the situation rather than provided explicitly.
please help me. ill give you brainliest if you help me (please only answer if you have the right one)
Answer:410.022779
Explanation: To figure out force, you use the equation F=MA. Well, in this case, you're trying to find M. The mass. All you have to do is rearrange. F=MA turns into A=F/M.
A 8.0\,\text {kg}8.0kg8, point, 0, start text, k, g, end text box is released from rest at a height y_0 =0.25\,\text my 0 =0.25my, start subscript, 0, end subscript, equals, 0, point, 25, start text, m, end text on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0\,\text m2.0m2, point, 0, start text, m, end text horizontally until it stops.
Answer:
μ = 0.125
Explanation:
To solve this problem, which is generally asked for the coefficient of friction, we will use the conservation of energy.
Let's start working on the ramp
starting point. Highest point of the ramp
Em₀ = U = m h y
final point. Lower part of the ramp, before entering the rough surface
[tex]Em_{f}[/tex] = K = ½ m v²
as they indicate that there is no friction on the ramp
Em₀ = Em_{f}
m g y = ½ m v²
v = [tex]\sqrt{2gy}[/tex]
we calculate
v = √(2 9.8 0.25)
v = 2.21 m / s
in the rough part we use the relationship between work and kinetic energy
W = ΔK = K_{f} -K₀
as it stops the final kinetic energy is zero
W = -K₀
The work is done by the friction force, which opposes the movement
W = - fr x
friction force has the expression
fr = μ N
let's write Newton's second law for the vertical axis
N-W = 0
N = W = m g
we substitute
-μ m g x = - ½ m v²
μ = [tex]\frac{v^{2} }{2 g x}[/tex]
Let's calculate
μ = [tex]\frac{2.21^{2}}{2\ 9.8\ 2.0}[/tex]
μ = 0.125
A 8.0 kg box is released from rest at a height y0 = 0.25 m on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0 m horizontally until it stops.
What is the friction coefficient of the horizontal surface?
Answer: 0.125
What are compounds considered to be
Answer:A compound is a substance formed when two or more elements are chemically joined.
Explation:Water, salt, and sugar are examples of compounds.
I hope this helps<3
Margaret wants to go for a swim, and decides to jump in using the diving board that measures 3-m long.
She initially leaps with a velocity of 8.0 m/s at an angle of 80° to the horizontal.
What are the horizontal and vertical components of her velocity?
please help if you can!
Answer:
The horizontal component of her velocity is approximately 1.389 m/s
The vertical component of her velocity is approximately 7.878 m/s
Explanation:
The given question parameters are;
The initial velocity with which Margaret leaps, v = 8.0 m/s
The angle to the horizontal with which she jumps, θ = 80° to the horizontal
The horizontal component of her velocity, vₓ = v × cos(θ)
∴ vₓ = 8.0 × cos(80°) ≈ 1.389
The horizontal component of her velocity, vₓ ≈ 1.389 m/s
The vertical component of her velocity, [tex]v_y[/tex] = v × sin(θ)
∴ [tex]v_y[/tex] = 8.0 × sin(80°) ≈ 7.878
The vertical component of her velocity, [tex]v_y[/tex] ≈ 7.878 m/s.
Coretta feels confident in her abilities, and she frequently makes contributions to her local community. Based on this information, what can you assume is true about Coretta?
A She has good emotional health.
B She makes self-esteem a priority.
C She recently improved her mental health.
D She exercises at least twice a day.
Answer:
A She has good emotional health.
Explanation:
the velocity of a body of mass 60kg reaches 15m/s from 0m/s in 12 second. calculate the kinetic energy and power of the body.
Answer:
KE=1/2m v^2
1/2*60*15*15
30*15*15
6750 joules
power=work/time
I need the answer for both questions plzZz
Answer:
Im not really sure lemme ask my friend he knows about this subject and when he gives me answer ill edit this
Explanation:
Answer:
i dont even know
Explanation:
I just dont know
What types of energy is used to make a lamp work
Answer:
Electrical energy
Explanation:
URGENT!!!
Calculate the frequency of violet light if the wavelength in air is 430nm.
* speed.of violet light in the prism = 2×10^8 m/s
* 1nm = 10^-9
* velocity of light in air = 3×10^8 m/s
Answer:
[tex]f=6.97\times 10^{14}\ Hz[/tex]
Explanation:
Given that,
Wavelength, [tex]\lambda=430\ nm=430\times 10^{-9}\ m[/tex]
We need to find the frequency of the violet light.
We know that the relation between frequency and wavelength is given by :
[tex]f=\dfrac{c}{\lambda}\\\\f=\dfrac{3\times 10^8}{430\times 10^{-9}}\\\\f=6.97\times 10^{14}\ Hz[/tex]
So, the frequency of violet light is [tex]6.97\times 10^{14}\ Hz[/tex].
what ocean features occur along areas of volcanic activity in the ocean floor and release high pressure, extremely hot water and chemicals?
Mid-ocean ridges
Continental shelfs
Hydrothermal vents
Trenches
Answer:
Hydrothermal vents
Explanation:
How does eclipses occur
Answer:
When Earth passes directly between the sun and the moon, a lunar eclipse takes place. During a solar eclipse, the moon casts two shadows. One is called the umbra; the other is called the penumbra. An eclipse takes place when Earth or the moon passes through a shadow.
Which shows the use of a fulcrum? Choose all that apply.
Choose all answers that are correct.
Question options:
Hands opening a bottle with bottle opener
Man moving rock with a lever
Boy using an ax to cut wood in forest
Answer:
Hands opening a bottle with bottle opener
A 0.050 kg ball starts from rest at some unknown height on a toy roller coaster.
At a later time, it travels through the top of a loop at 2 m/s and a height of 0.40 m.
Since this track is frictionless, what was the starting height of the ball?
Answer:
The starting height of the ball is approximately 0.604 m
Explanation:
The given parameters are;
The mass of the the ball = 0.050
The speed with which it travels through the top loop = 2 m/s
The given height at which the ball moves at 2 m/s = 0.40 m
Therefore, we have;
1/2·m·v² = m·g·h
1/2·v² = g·h
h = 1/2·v²/g = 1/2 × 2²/9.81 ≈ 0.204
The additional height = h = 0.204 m
Therefore;
The starting height of the ball ≈ The given height at which the ball moves at 2 m/s + h
The starting height of the ball ≈ 0.40 + 0.204 = 0.604 m
The starting height of the ball ≈ 0.604 m.
When any object in rest, then potential energy is present. But when object is in motion then object have kinetic energy.
Starting height of the ball is 0.604 m.
We know that, when any object is start from rest, then potential energy is converted into kinetic energy.
[tex]\frac{1}{2}mv^{2} =mgh[/tex]
Where m is mass of object, g is gravitational acceleration , h is height and v is velocity of object. (value of g = 9.81 m/ second square)
from above equation,
we get, extra height [tex]h=\frac{v^{2} }{2g} \\\\h=\frac{4}{2*9.81}\\\\h=0.204[/tex] meter
The starting height of the ball will be sum of the height at which ball moves 2 m/s and extra height.
Starting height = 0.40 + 0.204 = 0.604 meter.
Learn more:
https://brainly.com/question/18963960
if the volume of a cube is 100cm3. what's the measurement of one of its length
Answer:
100 cm
Explanation:
Answer:
4.64
Explanation:
The cube root of 100 is 4.64.
A marble is given potential energy by being placed by a location w. When the marble is released it rolls down the track at which location dose the marble have maximum kinetic energy w x or y or z
Answer:
The answer is "Location Y"
Explanation:
Please find the complete question in the attachment.
As we show in the graph when the marble rolling with the full force it will stop on the y location because it is curved, and the marble can't move to another location, that's why the maximum kinetic energy of the marble is at the y location.