This document contains ink, shapes and i... 7. Provide any five evidence of continental drift. 8 Islands of New Zealand, Indonesia and Samoa are characterised by the most violent earthquakes in the world. Explain (10 marks)

Answers

Answer 1

Fit of Continents: The coastlines of continents, such as Africa and South America, seem to fit together like puzzle pieces. The matching shapes of continents on opposite sides of the Atlantic Ocean provide evidence for their past unity.

Fossil Distribution: Fossils of identical plants and animals have been discovered on separate continents that are now widely separated. For example, the discovery of the same fossilized reptile species in both South America and Africa suggests that these continents were once connected.

Rock and Mountain Formation: Similar rock types, ages, and mountain ranges are found on different continents that are now far apart. The Appalachian Mountains in North America and the Caledonian Mountains in the British Isles and Scandinavia are examples of such similarities.

Paleoclimatic Evidence: Ancient climate indicators, such as coal deposits and glacial striations, have been found in regions that are now located in different climatic zones. This suggests that the continents have shifted over time, as the current climates would not have been conducive to their formation.

Seafloor Spreading and Magnetic Reversals: The discovery of mid-ocean ridges and the mapping of magnetic anomalies in oceanic crust provide evidence for seafloor spreading. These phenomena indicate that the ocean floor is spreading apart, pushing continents away from each other.

Explanation of Violent Earthquakes in New Zealand, Indonesia, and Samoa:

The islands of New Zealand, Indonesia, and Samoa are located in regions characterized by intense seismic activity due to their positions along tectonic plate boundaries. These areas experience violent earthquakes as a result of the complex interactions between the Earth's tectonic plates.

New Zealand sits on the boundary between the Pacific and Australian plates, which are actively converging. The collision and subduction of these plates generate high-pressure zones, causing frequent and powerful earthquakes. The country's location on the Pacific Ring of Fire, a region known for intense volcanic and seismic activity, further contributes to the frequency of earthquakes.

Indonesia lies on the Pacific Ring of Fire as well, specifically on the boundary between the Pacific and Indo-Australian plates. This tectonic convergence results in a highly seismically active region, known for its devastating earthquakes and volcanic eruptions. The subduction of the oceanic Indo-Australian plate beneath the continental Eurasian plate creates significant geological stress and leads to frequent seismic events.

Samoa is situated near the boundary between the Pacific and Australian plates, experiencing a combination of subduction and strike-slip faulting. The interaction between these plates produces large earthquakes, as the intense pressure and movement along the faults cause the release of accumulated energy.

In summary, the violent earthquakes experienced in New Zealand, Indonesia, and Samoa are a direct consequence of their locations along tectonic plate boundaries and the geological processes associated with these boundaries, including subduction, collision, and faulting.

Learn more about violent earthquakes here

https://brainly.com/question/30737022

#SPJ4


Related Questions

Easter Island __________.
1. was settled by native people from South America first
2. was first discovered by Charles Darwin
3. is famous for its sculptures
4. was barren because of its distance from

Answers

Easter Island is famous for its sculptures. The right answer is 3.

Easter Island, also known as Rapa Nui, is famous for its sculptures, particularly the monumental stone statues called moai. The moai statues are large, monolithic figures carved from volcanic rock known as tuff. They typically depict human figures with elongated heads, prominent brows, and solemn facial expressions. The moai were created by the ancient Rapa Nui people between the 13th and 16th centuries.

The process of carving and transporting these massive statues is a remarkable feat of engineering and craftsmanship.  The significance and purpose of the moai statues are believed to be tied to ancestral worship and the cult of the ancestors. Efforts have been made to preserve and restore the moai and the archaeological sites on the island, and they are now recognized as a UNESCO World Heritage site.

The correct answer is option 3.

Know more about Easter Island here

https://brainly.com/question/32157218

#SPJ4

Scientists often use the term 'super volcanic eruptions' to describe those eruptions that result in
short-term (1-2 years) cooling of global climate
formation of giant calderas
rapid subduction of oceanic plate in less than 1 month.
massive loss of lives (>100,000 casualties)

Answers

Super volcanic eruptions are exceptionally large volcanic eruptions that release a tremendous amount of magma, resulting in the formation of enormous volcanic craters called calderas.

These eruptions are characterized by the expulsion of massive volumes of ash, gases, and pyroclastic material into the atmosphere.

The term 'super' refers to the magnitude and scale of these eruptions, which are far more powerful and devastating compared to typical volcanic eruptions. Super volcanic eruptions can have significant global impacts, affecting the climate, environment, and even human populations.

While super volcanic eruptions can have indirect consequences such as short-term cooling of the global climate due to the injection of volcanic ash into the atmosphere, rapid subduction of oceanic plates, and massive loss of lives, these consequences are not defining characteristics of super volcanic eruptions. The primary defining feature is the formation of giant calderas.

Examples of super volcanic eruptions include the Toba eruption in Indonesia approximately 74,000 years ago and the Yellowstone eruption in the United States around 640,000 years ago.

In summary, the term 'super volcanic eruptions' refers to eruptions that lead to the formation of giant calderas, which are massive volcanic craters. These eruptions release vast amounts of magma and have significant global impacts.

Learn more about the volcanic eruptions:

brainly.com/question/30028532

#SPJ4

If all the ice in the Greenland and Antarctica ice sheets melted, by approximately how much would global sea level rise around the world? 27 m 55 m 77 m 7 m 17 m

Answers

If all the Ice in the Greenland and Antarctica ice sheets melted, by approximately 77m the global sea level would rise around the world. The correct option is c.

If all of the ice in the Greenland and Antarctic ice sheets melted, global sea level would increase by around 77 meters. The fundamental cause of the increase in melting of ice sheets in Antarctica, Greenland, and glaciers is global warming and climate change, which is mostly caused by increased greenhouse gas emissions from unsustainable human activities.

If glaciers melt, sea level rise will be uneven and may vary from place to place. Though not as soon as possible, if all of Greenland's ice melts, global sea level will increase by around 7 meters around the planet. If all of the Antarctic ice melts, global sea level will rise by around 70 meters.

Learn more about sea level, here:

https://brainly.com/question/32331702

#SPJ4

1.A map produced by a local Chamber of Commerce depicts the locational advantages for moving businesses to their town. This might be an example of the use of
A reference maps
B. thematic maps
C navigational maps
D.persuasion/propaganda maps
2.In the days before satellite assisted navigation, a special publication found on board most ocean going vessels titled The Coastal Pilot, assisted the navigator in locating where (most likely) they were making landa Rather than the perspective usually found on maps, the perspective is used in this publication.
A oblique
B. gnomonic
C plan or vertical
D. profile.

Answers

This might be an example of the use of  D. persuasion/propaganda maps.

In the days before satellite assisted navigation The correct answer is C. plan or vertical.

What is the maps?

The map made by a local business organization to show the benefits of moving businesses to their town is considered  a type of map that tries to persuade or convince people. These maps are made to encourage people to do something or believe in a certain way.

In this situation, the Chamber of Commerce is using the map to show the advantages of their town as a good place for businesses. They want to attract businesses to move there.

Read more about maps here:

https://brainly.com/question/25922463

#SPJ4

Chapter 14: Glaciers:
12. What are glaciers and where and why do they exist?
13. Know how alpine glaciers move. (Explain the two ways).
14. List all the landscapes resulted of flowing glaciers (alpine). Know how to identify them on a figure.
15. What are some of the depositional features of glaciers? What kind of materials do they deposit?

Answers

12. Glaciers are large bodies of ice that form over many years from the accumulation and compaction of snow in areas where snowfall exceeds melting.

13. Alpine glaciers move through two primary mechanisms: internal deformation and basal sliding.

14. Landscapes resulting from flowing alpine glaciers include U-shaped valleys, cirques, aretes, horns, and moraines. U-shaped valleys are wide and have steep sides, formed by the erosion of glaciers.

15. Depositional features of glaciers include moraines, drumlins, eskers, and erratics. Moraines are ridges or mounds of rock and sediment deposited by glaciers.

12. They exist in polar regions, high mountains, and some colder regions at lower elevations. Glaciers form due to a combination of low temperatures and sufficient snowfall that exceeds the rate of snowmelt.

13. Internal deformation refers to the ice slowly flowing downhill under the pressure of its weight, causing the ice crystals to rearrange and deform. Basal sliding occurs when the ice slides over a thin layer of meltwater or debris at the glacier's base, lubricating its movement.

14. Cirques are bowl-shaped depressions at the head of a valley where glaciers originate. Aretes are sharp, narrow ridges between two adjacent glaciers, while horns are pyramidal peaks formed by the erosion of several cirques. Moraines are accumulations of rock and sediment carried by glaciers and deposited along their margins. These landscapes can be identified on topographic maps or aerial photographs.

15. Drumlins are elongated hills or mounds with a smooth, streamlined shape formed by the deposition of glacial till. Eskers are long, winding ridges of sand and gravel deposited by meltwater streams flowing within or beneath glaciers. Erratics are large boulders transported and deposited by glaciers, often different from the surrounding rock types. Glaciers deposit various types of materials, including till (unsorted mixture of sediment), outwash (sorted sediment deposited by meltwater), and erratics (large transported boulders).

Learn more about glaciers here:

https://brainly.com/question/28474050

#SPJ4

Compare the natural disasters and environmental impacts that
occur to Latin America versus Indonesia and Australia during an El
Nino event.

Answers

During an El Nino event, Latin America, Indonesia, and Australia can experience different natural disasters and environmental impacts. Here is a comparison of the potential impacts in each region:

Latin America:

Drought: El Nino can lead to reduced rainfall in parts of Latin America, causing drought conditions. This can impact agriculture, water availability, and increase the risk of wildfires.

Flooding: In some regions, El Niño can also bring heavy rainfall and increased flooding. This can result in infrastructure damage, displacement of communities, and the spread of waterborne diseases.

Landslides: Heavy rainfall associated with El Niño can trigger landslides in hilly or mountainous areas, leading to property damage and loss of lives.

Indonesia:

Drought and Fires: El Niño can contribute to prolonged dry periods in Indonesia, leading to increased forest fires and haze. This can have severe impacts on air quality, human health, and biodiversity.

Crop Failure: Drought conditions can also affect agriculture, causing crop failures and impacting livelihoods of farmers.

Coral Bleaching: El Niño can result in elevated sea surface temperatures, leading to coral bleaching events in Indonesia's coral reefs, impacting marine ecosystems and biodiversity.

Australia:

Drought: El Niño can bring prolonged dry periods to parts of Australia, leading to severe drought conditions. This can impact agriculture, water availability, and livestock production.

Heatwaves: El Niño can contribute to hotter and drier conditions in Australia, increasing the risk of heatwaves. This poses health risks, especially for vulnerable populations, and can exacerbate bushfire risks.

Reduced Crop Yield: Drought and heat stress can impact crop production, leading to reduced yields and economic losses in the agricultural sector.

It's important to note that the specific impacts during an El Nino event can vary within each region and depend on various factors, including geographical location, local climate patterns, and existing environmental conditions. Additionally, the intensity and duration of El Niño events can vary, leading to different magnitudes of impacts.

Learn more about the El Nino:

brainly.com/question/18307318

#SPJ4

Assuming the normal lapse rate, given a temperature of 27.4°c at
sea level, what will the temperature be at 3000 meters?

Answers

The temperature at 3000 meters would be 7.9°C.

The lapse rate refers to the rate at which the temperature decreases with increasing altitude. In this context, the "normal lapse rate" indicates the average rate of temperature decrease per unit of vertical distance, typically expressed in degrees Celsius per kilometer or per thousand meters.

It helps estimate the change in temperature at different elevations and is an important factor in understanding atmospheric temperature variations and vertical temperature profiles in various regions.

The normal lapse rate is approximately 6.5°C per 1000 meters of elevation. Therefore, at 3000 meters, the temperature will decrease by (6.5°C * 3) 19.5°C.

So, the temperature at 3000 meters would be 27.4°C - 19.5°C

= 7.9°C.

Learn more about lapse rate here:

https://brainly.com/question/22257655

#SPJ4

BIM
Question 12 Not yet answered Points out of 1,00 Remove flag Numerous societal, technical, and demographic drivers will determine the development of BIM in the future. Select one: O True O False

Answers

True. Numerous societal, technical, and demographic drivers will indeed influence the development of Building Information Modeling (BIM) in the future.

BIM is a digital representation of the physical and functional characteristics of a building or infrastructure. Its implementation and evolution are influenced by various factors such as advancements in technology, industry standards, regulatory requirements, market demand, and the changing needs of the construction industry. As societal needs and expectations evolve, along with advancements in digital technologies and the increasing focus on sustainable and efficient construction practices, the development and ad of BIM will continue to be shaped by these drivers.

Learn more about technology here:

https://brainly.com/question/28288301

#SPJ11

Which one of the following statements is true?
Fire can be good for the maintenance of forests.
Edaphic factor has no influences on fauna.
Some stable substances (such as DDT) and heavy metals (such as mercury and lead) become concentrated at higher levels of a food chain. This is a good thing for the biota.
In a food pyramid, the total number of organisms tends to decrease as one travels down the trophic levels

Answers

The statement is true is that In a food pyramid, the total number of organisms tends to decrease as one travels down the trophic levels.

What is food pyramid

In a food pyramid, the total number of organisms decreases as one moves down the trophic levels this is because energy is lost at each trophic level as it is transferred from one organism to another.

The little fraction of the energy consumed by an organism is converted into biomass that is available for the next trophic level. Hence, the number of organisms decrease as one goes down the trophic levels, since there is no energy large enough for the large population at higher levels.

Learn more on food pyramids https://brainly.com/question/1477479

#SPJ4

What composition of magma is basalt made from primarily? Ultramafic Mafic Intermediate Felsic Question 28 When magma cools, it is generally the silicon and carbon that link together first. True False

Answers

1) Mafic magma is the primary composition of basalt, characterized by low silica content and high magnesium and iron levels.

Option (b) is correct.

2) The given statement "  When magma cools, it is generally the silicon and carbon that link together first" is false.

1) Mafic magma is characterized by its relatively low silica content and high levels of magnesium (Mg) and iron (Fe). Basaltic magma is formed through partial melting of the Earth's mantle, specifically in areas such as oceanic crust and volcanic hotspots. It is known for its dark-colored appearance and is commonly associated with volcanic activity, forming basaltic lava flows and volcanic rocks.

Mafic magma has a lower viscosity compared to other types of magma, allowing it to flow more easily and cover larger areas during volcanic eruptions. Its composition gives basalt its characteristic features, including its density, mineral composition, and solidification behavior.

2)  When magma cools and solidifies, the atoms of elements within the magma rearrange to form mineral crystals. The primary elements involved in this process are oxygen, silicon, and aluminum, which combine to create the crystalline structure. Carbon, on the other hand, is not a significant component in the crystallization of magma.

To learn more about magma here

https://brainly.com/question/20848350

#SPJ4

The complete questions are:

1) What composition of magma is basalt made from primarily?

a) Ultramafic

b) Mafic

c)  Intermediate

d) Felsic

2)  When magma cools, it is generally the silicon and carbon that link together first. True False

Experiments of human activities on rivers in mokopane

Answers

Explanation:

Human activities, including mining, agriculture, and urbanisation, have led to increased levels of pollution in the river. This has impacted both the water quality and the health of the river's aquatic life. Human activities and development in the region are also a threat to the river.

The arrow labeld D in the above graphic is pointing to a A real world example of this type of volcanic activity can be found in Subduction zone, Andes Continental rift valley, East Africa Benioff Wadati zone, Cascades Transform Fault, California

Answers

The arrow labeld D in the above graphic is pointing to a Benioff Wadati zone. A real world example of this type of volcanic activity can be found in Cascades.

Option (c) is correct.

The arrow labeled D in the graphic is pointing to a Benioff Wadati zone, which is associated with subduction zones and represents the location where one tectonic plate is being forced beneath another. A real-world example of this type of volcanic activity can be found in the Cascades, a mountain range in western North America that extends from northern California to southern British Columbia, Canada.

The Cascades are characterized by a series of volcanoes formed as a result of the subduction of the Juan de Fuca Plate beneath the North American Plate. The volcanic activity in the Cascades, including famous volcanoes such as Mount St. Helens and Mount Rainier, is a prime example of the Benioff Wadati zone and the associated subduction zone volcanism.

Therefore, the correct option is (c).

To learn more about Benioff Wadati zone  here

https://brainly.com/question/32406410

#SPJ4

The complete question is:

The arrow labeld D in the above graphic is pointing to a _____. A real world example of this type of volcanic activity can be found in _______.

a) Subduction zone, Andes

b) Continental rift valley, East Africa

c)  Benioff Wadati zone, Cascades

d) Transform Fault, California

sandstone contains abundant feldspar, suggesting that the sand was derived by weathering and erosion of granitic bedrock. Quartz-rich Oolitic Arkosic Lignitic

Answers

Arkosic  Sandstone contains abundant feldspar, suggesting that the sand was derived by weathering and erosion of granitic bedrock.

What is the sandstone?

Quartz-rich means that there is a lot of quartz in the sandstone, which is a mineral commonly found in sandstones. Olitic means having small round grains called ooids in a type of rock or sediment. These small round particles are usually made of calcium carbonate or silica.

Note that Arkose is a kind of rock made of sand that has lots of feldspar grains, quartz, and other minerals. It is usually linked with the breaking down of granite or transformed rocks due to weather.

Read more about sandstone here:

https://brainly.com/question/980701

#SPJ4

1) Atlantic silversides (Menidia menidia) display counter gradient variation in growth rate. During their growing seasons, northern populations grow far faster and larger than their southern counterparts. Why is rapid growth beneficial for northern populations? Why might slow growth be advantageous in southern populations? 2) A population of mice lives in a stable geographic territory. A developer comes along and builds a parking lot in that territory. This developer at least tries to accommodate nature by recreating the nesting ground of the mice in between parking lanes. That is, they place some boxes with straw (the Hilton to mice) throughout the asphalt lot. Yet, mice are repeatedly found dead around and in these artificial environments, but the population a short distance away in the grasslands are fine. There are no new predators, food is ample, and disease is low? What is going on?

Answers

Rapid growth is beneficial for northern populations of Atlantic silversides due to several reasons:

a) Shorter growing seasons

b) Enhanced survival and reproduction

c) Energy availability

How to explain the information

On the other hand, slow growth can be advantageous for southern populations of Atlantic silversides due to the following reasons:

a) Longer growing seasons: Southern populations experience longer summers and milder temperatures, providing them with an extended favorable period for growth and reproduction.

b) Predation pressure: Southern regions may have higher predation pressure compared to the northern regions.

c) Resource limitations: Southern waters may have lower productivity and limited food resources compared to the north.

Learn more about population on

https://brainly.com/question/29885712

#SPJ4

Part 1: Mid-Attantic Ocean Profile chains of volcanoes forin ealiod volcanic ares. the following ordet. 2. Check the box next 10 the Mid-Atlantic Ocean Profile line under the heading Profike tienes 3.

Answers

The Mid-Atlantic Ridge (MAR) is a largely underwater mountain range in the Atlantic Ocean that stretches from 87°N (approximately 333km south of the North Pole) to 54°S (subantarctic Bourvet Island). The Mid-Atlantic Ridge (MAR) is a volcanic mountain range that rises from the Atlantic abyss, spanning more than 16,000 km.

From the Arctic (Gakkel Ridge) to the Antarctic (Bouvet Triple Junction). The Mid-Atlantic Ridge is the world's longest mountain range. It spans from North America to beyond the southern tip of Africa along the Atlantic Ocean seabed. It climbs 6,000-13,000 feet (2,000-4,000 metres) above sea level and stretches for 10,000 miles (16,000 kilometres). A hotspot of volcanic activity exists beneath the ridge.

To learn more about Mid-Atlantic, click here.

https://brainly.com/question/31460732

#SPJ4

Provide a full definition of the North Carolina NAD83 (HARN) coordinate reference system (CRS) with EPSG:3358 including the datum and projection. Explain how it is different from the geographic coordinate system WGS84 with EPSG:4326 commonly used by GPS. What are the units for each of these two CRS?

Answers

The North Carolina NAD83 (HARN) coordinate reference system is a modern and accurate coordinate system that is well suited for surveying, mapping, and other applications that require precise and reliable location data. It is a regional CRS that covers the state of North Carolina and is based on the North American Datum of 1983 (NAD83).

The North Carolina NAD83 (HARN) coordinate reference system is a modern and accurate coordinate system that is well suited for surveying, mapping, and other applications that require precise and reliable location data. It is a regional CRS that covers the state of North Carolina and is based on the North American Datum of 1983 (NAD83). The system uses the HARN (High Accuracy Reference Network) adjustment to improve the accuracy of the geodetic control network.
The NAD83 (HARN) CRS uses the Lambert Conformal Conic projection (EPSG:3358), which is a conic projection that preserves the shape of small areas while minimizing distortion at mid-latitudes. This projection is well suited for mapping large regions such as states or countries.
The WGS84 CRS with EPSG:4326, on the other hand, is a global geographic coordinate system that is commonly used by GPS. It is based on the World Geodetic System of 1984 (WGS84), which is a global datum that is used to define the shape and size of the Earth. The WGS84 CRS uses latitude and longitude to define locations on the surface of the Earth.
The NAD83 (HARN) CRS uses the US Survey Foot (1.000002 ft) as its unit of measurement, while the WGS84 CRS uses degrees as its unit of measurement for latitude and longitude. The two CRS are different in terms of their projection, datum, and units of measurement. While the NAD83 (HARN) CRS is designed for regional mapping and surveying applications, the WGS84 CRS is a global CRS that is used by GPS and other location-based services.

To know more about data visit:

https://brainly.com/question/29117029

#SPJ11

1. Blue Water and Green Water 10 a. Define Blue Water. What is the biggest form of 'Blue Water' available to us? b. Define Green Water. In what form is 'Green Water' stored after precipitation?

Answers

Blue Water refers to the freshwater resources that are found in lakes, rivers, groundwater, and other surface and subsurface water bodies while Green Water refers to the water that is stored in the soil and vegetation.

It represents the visible and accessible water that can be used for various human activities. The biggest form of Blue Water available to us is the water stored in the world's oceans, which accounts for about 97.5% of the Earth's water resources. Green Water refers to the water that is stored in the soil and vegetation.

It is primarily obtained from precipitation and is stored in the root zone of plants and in the upper layers of the soil. It plays a vital role in supporting plant growth and maintaining ecological balance. After precipitation, Green Water is stored in the soil as soil moisture and is utilized by plants through their root systems.

Know more about freshwater here

https://brainly.com/question/30905960

#SPJ4

Mistake Island, Maine is commonly thought of as the fog capital
of the Atlantic coast. The island is located in the northeastern
part of Bar Harbor and records over 1,600 hours of fog annually,
mostly

Answers

Mistake Island is an island located in the northeastern part of Bar Harbor, Maine. It is known for experiencing high levels of fog, earning it the reputation as the fog capital of the Atlantic coast.

a. The type of fog associated with the fog capital of the Atlantic coast is advection fog. Advection fog forms when warm, moist air moves horizontally over a cold surface. As the warm air encounters the colder surface, it cools rapidly, causing the moisture in the air to condense into tiny water droplets or ice crystals, forming fog. In this case, the cool ocean waters of the Atlantic act as the cold surface, causing the warm, moist air to cool and condense into fog as it moves over the water.

b. The absence of similar "June Gloom" conditions along the southeast coastal Atlantic waters and beaches is because the southeast coast experiences warmer ocean waters compared to the colder waters of the northeastern coast. Warmer water temperatures result in less of a temperature contrast between the air and the ocean, reducing the potential for advection fog formation.

Also, the southeast coastal region has flat terrain and less pronounced temperature gradients which also limits the likelihood of fog formation.

Know more about advection fog here:

https://brainly.com/question/31669964

#SPJ4

The given question is incomplete. Hence, the complete question is:

"Mistake Island, Maine is commonly thought of as the fog capital of the Atlantic coast. The island is located in the northeastern part of Bar Harbor and records over 1,600 hours of fog annually, mostly thanks to the chilly Atlantic Ocean.

a. What type of fog is most likely associated the fog capital of the Atlantic coast”? Explain your answer by describing how the fog forms.

b. Explain why we don’t see similar “June Gloom” conditions along southeast coastal Atlantic waters and beaches. Be specific about what conditions limit the likelihood of the foggy conditions."

Discuss (3 pages max) the metamorphism that resulted in the
formation of the Central Zone of the Limpopo Belt including the
rock types found in the entire belt

Answers

The Central Zone of the Limpopo Belt was formed during the Archaean period of the Precambrian era and is located in southern Africa. The Limpopo Belt is divided into three different zones, the Eastern, Central, and Western Zones.

The metamorphic event that formed the Central Zone of the Limpopo Belt is thought to have occurred between 3.2 and 2.9 billion years ago. During this time, sedimentary rocks, such as sandstones and mudstones, were buried beneath the earth's surface and subjected to extreme heat and pressure.

The rock types found in the Central Zone of the Limpopo Belt include gneiss, granulite, and migmatite. Gneiss is a metamorphic rock that forms when other rocks, such as granite or sedimentary rocks, are subjected to high heat and pressure.

To know more about Limpopo Belt visit:-

https://brainly.com/question/29482256

#SPJ11

What is "Bowen ratio"? Include a small chart identifying the Bowen ratio of different land surfaces (water, ice, tropical forest, grassland, crops, desert, tundra). Imagine that a site is covered in crops. Half the site is watered daily. The other half is left to dry out. What happens to the Bowen ratio of the crops that are watered daily relative to the ratio when they are left to dry?

Answers

When crops are watered daily, the increased humidity increases evaporation, resulting in a greater contribution from latent heat flux and a lower Bowen ratio than when the crop is dry.

The Bowen ratio is a measure of the ratio between the sensible heat flux (heat transfer by conduction and convection) to the latent heat flux (heat transfer by evaporation) over the Earth's surface. A higher Bowen ratio indicates the dominance of the sensible heat flux, while a lower ratio indicates the dominance of latent heat flux.

The following table shows Bowen's ratios for different soil surfaces:

Water: Low Bowen Rate

Stone: High Bowen Rate

Tropical forest: Low Bowen Rate

Meadow: Intermediate Bowen Ratio

Crops: Intermediate Bowen Ratio

Desert: High Bowen Rate

Tundra: High Bowen Rate

If an area with crops is divided into two halves, with one half irrigated daily and the other half allowed to dry, the Bowen ratio of the crops watered daily is reduced compared to when they are dry. An increase in humidity due to daily watering will increase evaporation, resulting in a greater contribution of latent heat flux and a lower Bowen ratio. 

Learn more about evaporation:

https://brainly.com/question/25310095

#SPJ4

What is data mining? Please explain with one real-life
example.

Answers

Data mining is the process of discovering patterns and trends in large datasets. The data is often collected from a variety of sources and is used to uncover hidden relationships, anomalies, and other insights that can be used to make better decisions.

One real-life example of data mining is Amazon's recommendation system. When a customer makes a purchase on Amazon, the website collects data about the product, such as the product name, category, and price. It then uses this data to make personalized product recommendations to the customer. The system analyzes the customer's purchase history and behavior, such as the pages they've viewed and the products they've added to their cart, to determine what products they're most likely to be interested in. This process is done using data mining techniques to uncover patterns and trends in the data that can be used to make better product recommendations.

Learn more about Data mining at https://brainly.com/question/30395228

#SPJ11

What would occur if all of the ice on Greenland and Antarctica melted?
a.
glacial transgression
b.
marine transgression
c.
continental transgression
d.
marine regression
e.
continental regression

Answers

If all of the ice on Greenland and Antarctica were to melt, it would have significant consequences for the Earth's landmasses and oceans. Hence option B is correct.

The melting of this immense ice would lead to a rise in sea levels globally. Low-lying coastal areas and islands would be particularly vulnerable, facing increased risk of flooding and submersion.

The resulting scenario would be a combination of marine transgression and continental regression. Marine transgression refers to the encroachment of the sea onto land, and this would occur as sea levels rise due to the melting ice. Coastal regions and areas near river mouths would be gradually submerged, leading to the loss of habitats, infrastructure, and the displacement of populations.

At the same time, there would be continental regression, as the newly melted ice would contribute a massive influx of freshwater into the oceans. This could disrupt ocean currents and affect global climate patterns, leading to changes in precipitation, temperatures, and weather conditions worldwide.

Overall, the melting of all ice on Greenland and Antarctica would result in a complex interplay of marine transgression and continental regression, causing widespread and far-reaching impacts on coastal regions, ecosystems, and the global climate system.

Learn more about marine transgression here

https://brainly.com/question/31741410

#SPJ4

Find solutions for your homework
Find solutions for your homework
scienceearth sciencesearth sciences questions and answersanswer the following questions clearly. 1. what is the difference between magma and lava? 2. what is the dominant difference between felsic and mafic rocks? 3. what are gabbro and diorite? how do they differ? 4. how do geologists classify igneous rocks? 5. what is bowen reaction series?
Question: Answer The Following Questions Clearly. 1. What Is The Difference Between Magma And Lava? 2. What Is The Dominant Difference Between Felsic And Mafic Rocks? 3. What Are Gabbro And Diorite? How Do They Differ? 4. How Do Geologists Classify Igneous Rocks? 5. What Is Bowen Reaction Series?
Answer the following Questions Clearly.
1. What is the difference between magma and lava?
2. What is the dominant difference between felsic and mafic rocks?
3. What are Gabbro and Diorite? How do they differ?
4. How do geologists classify igneous rocks?
5. What is Bowen Reaction Series?

Answers

1. The main difference between magma and lava is their location. Magma is molten rock beneath the Earth's surface, while lava is magma that reaches the Earth's surface during a volcanic eruption.

2. The dominant difference between felsic and mafic rocks is their mineral composition. Felsic rocks have a higher percentage of silica (SiO2) and aluminum (Al2O3), while mafic rocks have higher levels of iron (Fe) and magnesium (Mg).

3. Gabbro and diorite are both intrusive igneous rocks. Gabbro is composed mainly of dark-colored minerals like pyroxene and plagioclase feldspar, while diorite consists of a combination of dark and light minerals such as amphibole and plagioclase feldspar. The main difference is in their mineral composition.

4. Geologists classify igneous rocks based on their mineral composition, texture (grain size and arrangement), and origin (intrusive or extrusive). This classification helps in understanding the rock's formation processes and provides insights into the Earth's history and geologic activity.

5. The Bowen Reaction Series is a sequence of mineral crystallization in cooling magma or lava. It shows the order of minerals that form as the magma/lava cools and their respective temperatures of crystallization. The series demonstrates how minerals with higher melting points solidify first, followed by those with lower melting points, providing insights into the formation of different igneous rock types.

Learn more about Bowen Reaction Series here:

https://brainly.com/question/13431170

#SPJ4

The given question is not properly written. Hence, the proper question is:

"Answer the following Questions Clearly.

1. What is the difference between magma and lava?

2. What is the dominant difference between felsic and mafic rocks?

3. What are Gabbro and Diorite? How do they differ?

4. How do geologists classify igneous rocks?

5. What is Bowen Reaction Series?"

How much time did the shortcut between east and west save?

Answers

Answer:

The Panama Canal shortcut greatly reduces the time for ships to travel between the Atlantic and Pacific oceans, enabling them to avoid the lengthy, hazardous Cape Horn route around the southernmost tip of South America via the Drake Passage or Strait of Magellan. The canal handles more vessel traffic than had ever been envisioned by its builders. By 2012, more than 815,000 vessels had passed through the canal. In 2017 it took ships an average of 11.38 hours to pass between the canal's two locks.

Explanation:

According to Bowen's reaction series, a basaltic magma undergoing fractional crystallization that produces biotite has yet to fully crystallize? Ca-rich plagioclase Pyroxene Muscovite Olivine

Answers

According to Bowen's reaction series, a basaltic magma undergoing fractional crystallization that produces biotite has yet to fully crystallize.

The minerals that crystallize in the basaltic magma in sequential order based on Bowen's reaction series are: olivine, pyroxene, Ca-rich plagioclase, muscovite, and biotite.

Since biotite is one of the last minerals to crystallize, it indicates that the magma has not completely solidified or undergone full crystallization. Therefore, the correct answer is "Olivine" as the basaltic magma would have already crystallized olivine before reaching the stage of producing biotite.

Learn more about the Bowen's reaction series:

brainly.com/question/13431170

#SPJ4

Match the listed components of the solar system with their correct description. Choices - use a choice only once A. Europa B. Pluto C. The Asteroid Belt D. Uranus E. The Kuiper Belt F. lo G. Jupiter H. Venus 1. Neptune J. The Oort Cloud K. Saturn L. Callisto M. Comet N. Ganymede O. Mercury P. Ceres Q. Planetary Rings R. Mars S. Earth

Answers

The correct match of the listed components of the solar system with their descriptions.

A. Europa - One of Jupiter's moons known for its subsurface ocean and potential for life.

B. Pluto - A dwarf planet located in the Kuiper Belt beyond Neptune's orbit.

C. The Asteroid Belt - A region located between the orbits of Mars and Jupiter that contains numerous rocky objects called asteroids.

D. Uranus - The seventh planet from the Sun, characterized by its unique tilted axis and icy composition.

E. The Kuiper Belt - A region of the solar system beyond Neptune's orbit that contains icy bodies, including Pluto.

F. Io - One of Jupiter's moons known for its intense volcanic activity.

G. Jupiter - The largest planet in the solar system, known for its distinct bands of clouds and the Great Red Spot.

H. Venus - The second planet from the Sun, known for its thick atmosphere and extreme temperatures.

1. Neptune - The eighth planet from the Sun, characterized by its blue color and strong winds.

J. The Oort Cloud - A region of icy objects located at the outer edge of the solar system, believed to be the source of long-period comets.

K. Saturn - The sixth planet from the Sun, known for its prominent rings made of ice and rock particles.

L. Callisto - One of Jupiter's moons, known for its heavily cratered surface and the presence of an underground ocean.

M. Comet - A small celestial object composed of dust and ice that orbits the Sun, often characterized by a glowing coma and tail when it approaches the inner solar system.

N. Ganymede - The largest moon in the solar system and one of Jupiter's moons, larger than the planet Mercury.

O. Mercury - The smallest and closest planet to the Sun, characterized by its extreme temperature variations.

P. Ceres - The largest object in the asteroid belt between Mars and Jupiter, now considered a dwarf planet.

Q. Planetary Rings - Flat, disk-like structures composed of particles orbiting around certain planets, including Saturn and Uranus.

R. Mars - The fourth planet from the Sun, known for its reddish appearance and the presence of polar ice caps.

S. Earth - The third planet from the Sun, known for its diverse ecosystems and the presence of liquid water.

To know more about dwarf planet visit:

https://brainly.com/question/28308770

#SPJ11

What is the root cause for why Mars lost its atmosphere?
A.Mars' gravity is to weak to hold onto its atmosphere, which gradually leaked away.B.Mars' is so far from the sun that it is very cold and as it cooled following its formation its atmosphere froze out.C.The correct answer is not given.D.Mars' core ran out of iron to power its magnetic field.E.Mars' core solidified as it cooled.

Answers

Mars' gravity is too weak to hold onto its atmosphere, which has slowly slipped away. The right answer is A.

The root cause of the loss of Mars' atmosphere is primarily Option A: Mars' gravity is too weak to hold onto its atmosphere, which has slowly slipped away. Because of its relatively low mass and weaker gravity than Earth, Mars has struggled to retain its atmosphere on geologic time scales.

Atmospheric gases gradually escape into space, driven by a combination of evaporative processes and the action of the solar wind. This continuous loss of atmosphere has contributed significantly to Mars' current thin and fragile atmosphere

Learn more about gravity:

https://brainly.com/question/18258780

#SPJ4

Sensible heat is distributed across the earth’s surface, with what percentage of the total is accounted for by sensible heat transfer over land, and how much is accounted for by sensible heat transfer over the oceans? How much does latent energy transfer contribute to the total Earth’s surface heat budget?

Answers

Sensible heat is the heat that is transferred between a surface and the air above it by conduction and convection.

How to explain the information

It is a major component of the Earth's surface energy budget, accounting for about 20% of the total.

The percentage of sensible heat transfer over land and oceans is as follows:

Land: 20%

Oceans: 80%

This is because the oceans have a much larger heat capacity than land, so they can store more heat without a significant change in temperature. As a result, the oceans release less sensible heat to the atmosphere than land.

Latent energy transfer, on the other hand, is the heat that is transferred between a surface and the air above it by the process of evaporation and condensation. It accounts for about 80% of the total Earth's surface energy budget.

Learn more about conduction on

https://brainly.com/question/893656

#SPJ4

Check all that apply:
insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average
OLR exceeds insolation at high latitudes in an annual average
meridional heat transport mostly occurs in the atmosphere
meridional heat transport mostly occurs in the ocean
meridional heat transport mostly occurs in the land surface
the net top-of-atmosphere radiation balance varies seasonally
Learn with edx Mobile

Answers

The following statements are all true:

Insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average.OLR exceeds insolation at high latitudes in an annual average.Meridional heat transport mostly occurs in the atmosphere.The net top-of-atmosphere radiation balance varies seasonally.

How to explain the information

The first two statements are about the difference between incoming solar radiation (insolation) and outgoing longwave radiation (OLR). Insolation is the amount of solar energy that reaches the Earth's surface, while OLR is the amount of thermal radiation that is emitted back to space.

In the low latitudes, the insolation is much greater than the OLR, so there is a net surplus of energy. This surplus of energy is then transported poleward by the atmosphere and ocean.

Learn more about Latitude on

https://brainly.com/question/30459307

#SPJ4

Which cloud solution most equates to leasing a car terms of ease of manageability as compared to amount of control? laaS
SaaS
On-Premise PaaS.

Answers

Among the given options, the cloud solution that most equates to leasing a car in terms of ease of manageability as compared to the amount of control is Software as a Service (SaaS).

What is Software as a Service (SaaS)

SaaS is a cloud computing model where software applications are provided over the internet as a service. With SaaS, users can access and use software applications without the need for installation, maintenance, or management of the underlying infrastructure. It is similar to leasing a car because, with a lease, you have access to the car without the responsibility of owning or maintaining it.

In the context of cloud solutions, SaaS provides a high level of ease of manageability as the service provider takes care of the infrastructure, updates, and maintenance of the software application.

Learn more about cloud solution at

https://brainly.com/question/19057393

#SPJ4

Other Questions
Arsenic, hydraulic fracturing, lead, and PFAS present chemical threats to global drinking water supplies in different ways. For each problem, describe: (a) the origin of exposure, (b) human health consequences, (c) drivers of continued exposure, and (d) examples of modern solutions. Please answer ASAP I will brainlist 2. Obtain the symmetrical components of a set of unbalanced currents: IA = 1.6 25 IB = 1.0 180 IC = 0.9 132 14. (1 pt.) "t-SNE" is an example of which type of general ML algorithm: (circle) (i) classification (ii) regression (iii) dimensionality reduction (iv) backpropagation 15. (2 pts.) Let x = (x,x). Using the feature mapping O()=(x3, 12-xxx) show that ((2,3)-0((4.4)) =((2,3)-(4.4))? 16. (5 pts.) Gradient Descent. Consider the multivariate function: f(x,y) = x+ + y2 Devise an iterative rule using gradient descent that will iteratively move closer to the minimum of this function. Assume we start our search at an arbitrary point: (10,y). Give your update rule in the conventional form for gradient descent, using for the learning rate. (i) Write the explicit x-coordinate and y-coordinate updates for step (i+1) in terms of the x- coordinate and y-coordinate values for the ith step. (1) 22 1 (ii) Briefly explain how G.D. works, and the purpose of the learning rate. (iii) Is your algorithm guaranteed to converge to the minimum of f (you (iii) Is your algorithm guaranteed to converge to the minimum of f (you are free to assume that the learning rate is sufficiently small)? Why or why not? (iv) Re-write your rule from part (i) with a momentum term, including a momentum parameter a. Are directors duties an effective method to promote CSR? Draw the cash flow diagrams for the equipment given in the table and which one would you recommend to choose?Equipment A BInitial investment cost 35,000 TL 48,000 TLAnnual operating cost 3600 TL 2100 TLScrap value 5000 TL 9000 TLEconomic life 8 years 8 yearsInterest rate 20% 20% FILL THE BLANK."38. It is the job of __________________________________ in theHouse of Representatives to assign bills for committee reviewcontrolling the fate of most legislation.______________________________ is" Kindly, do full code of C++ (Don't Copy)Q#1Write a program that:Collects sequentially lines of text (phrases) from a text file: Hemingway.txt;Each line of text should be stored in a string myLine;Each line of text in myLine should be stored on the heap and its location assigned to a char pointer in an array of char pointers (max size 40 char pointers) - remember that strings can be transformed to c-strings via c_str() function;Control of the input should be possible either reading end of file or exceeding 40 lines of text;The correct number of bytes on the heap required for each line should be obtained through a strlen(char *) ).After finishing collecting all the lines of text, the program should print all the input text linesAfter printing original text, delete line 10 -13 and add them to the end of original textPrint updated modified textAfter printing updated text, parse each line of text into sequential words which will be subsequently stored in a map container (Bag), having the Key equal to the parsed word (Palabra) and the second argument being the number of characters in the word(Palabra)Print the contents of the Bag (Palabra) and associated number of character symbolsPrint the total number of unique words in the Bag, the number of words having length less 8 symbolsThe information that you have prepared should allow a publisher to assess whether it is viable to publish this authorBTW - the Unix function wc on Hemingway.txt produces:wc Hemingway.txt 20 228 1453 Hemingway.txtThis is the File { Hemingway.txt } belowThe quintessential novel of the Lost Generation,The Sun Also Rises is one of Ernest Hemingway's masterpieces and a classic example of his spare butpowerful writing style.A poignant look at the disillusionment and angst of the post-World War I generation, the novel introducestwo of Hemingway's most unforgettable characters: Jake Barnes and Lady Brett Ashley.The story follows the flamboyant Brett and the hapless Jake as they journey from the wild nightlife of 1920sParis to the brutal bullfighting rings of Spain with a motley group of expatriates.It is an age of moral bankruptcy, spiritual dissolution, unrealized love, and vanishing illusions.First published in 1926, The Sun Also Rises helped to establish Hemingway as one of the greatest writers ofthe twentieth century.-------------------------------------------------Synopsis of Novel;The Sun Also Rises follows a group of young American and British expatriates as they wander through Europein the mid-1920s. They are all members of the cynical and disillusioned Lost Generation, who came of ageduring World War I (1914-18).Two of the novel's main characters, Lady Brett Ashley and Jake Barnes, typify the Lost Generation. Jake,the novel's narrator, is a journalist and World War I veteran. During the war Jake suffered an injury thatrendered him impotent. After the war Jake moved to Paris, where he lives near his friend, the Jewishauthor Robert Cohn. TRUE / FALSE. "The unique Greek-inspired concept that is a forerunner ofclassical opera is the idea of ""sacrifice"". A filter is described by the DE y(n) = - 2) Find the system function. 3) Plot poles and zeros in the Z-plane. 1 y(n-1) + x(n) x(n-1) 4) Is the system Stable? Justify your answer. 5) Find Impulse response. 6) Find system's frequency response 7) Compute and plot the magnitude and phase spectrum. (use MATLAB or any other tool) 8) What kind of a filter is this? (LP, HP, .....?) 9) Determine the system's response to the following input, (7n), x(n) = = 1 + 2 cos -[infinity]0 Given: A quarter-bridge Wheatstone bridge circuit is used with a strain gage to measure strains up to 1000 strain for a beam vibrating at a maximum frequency of 20 Hz, As shown in Figure 1. The supply voltage to the Wheatstone bridge is Vs = 6.00 V DC All Wheatstone bridge resistors and the strain gage itself are 1000 The strain gage factor for the strain gage is GF = 2 The output voltage Vo is sent into a 12-bit A/D converter with a range of 10 V Op-amps, resistors, and capacitors are available in this lab (a) To do: calculate the voltage output from the bridge. (b) If we sample the signal digitally at f=30 Hz(sampling frequency), is there any aliasing frequency in the final result? (c) If the analog signal can be first passed through an amplifier circuit, compute the amplifier gain required to reduce the quantization error to 2% or less. Describe with neat sketches about the bridge circuit and amplifier diagram for this problem. (d) To do:If the applied force F-0, usually the output voltage after the A/D converter is not equal to zero, give your explanations and ethods to eliminate the influence of this set voltage. Spring Object in motion 40 M Seismic mass Input motion Figure 1 seismic instrument -Output transducer Damper Strain gauge Cantilever beam Figure 2 strain gauge F Since x is a number in the set {0, 1, . . . , 2^ t}, we can write x in binary as: x = b0 2 ^0 + b1 2^ 1 + b2 2 ^2 + + bt 2^ t , (1) where bi are bits. If b0 = 0, then x = b1 2 ^1 + b2 2 ^2 + + bt 2 ^t = 2y, for some integer y, i.e., x is an even number. On the other hand, if b0 = 1, then x = 1 + b1 2 ^1 + b2 2 ^2 + + bt 2 ^t = 2y + 1, for some integer y, i.e., x is an odd number. Let m = 2^(t 1) .(c) Show that if b0 = 0, then (g^ x )^ m 1 (mod p).(to do)(d) Show that if b0 = 1, then (g ^x ) ^m p 1 (mod p).(to do) EX In the system using the PIC16F877A, a queue system of an ophthalmologist's office will be made. The docter con see a maximum of 100 patients por day. Accordingply; where the sequence number is taken, the button is at the 3rd bit of Port B. when this button is pressed in the system, a queue slip is given. (In order for the plug motor to work, it is necessary to set 2nd bit of POPA. It should be decrapain after a certain paind of time.). It is requested that the system des not que a sequence number ofter 100 sequence member received. At the same time it is desired that the morning lang ' in bit of pale on. DELAY TEST MOULW hIFF' OFSS PORTB, 3 MOVWF COUTER? CYCLE BSF PORTA, 2 DECFJZ CONTER?, F CALL DELAY GOD CYCLE BCF PORTA, 2 RE TURU DECFS COUTER, F END 670 TEST BSF PORTS, O LIST P=16F877A COUNTER EBY h 20' COUNTERZ EQU '21' INCLUDE "P16F877A.INC." BSF STATUS, 5 movzw h'FF' MOVWF TRISS CURE TRISA CLRF TRISC BCF STATUS.5 Morew h'64' MOUWF COUNTER A machine is placed on member BC which has an unbalanced force of 500 kg which varies sinusoidally. Neglecting the mass of the machine, determine: (i) the maximum displacement when the unit"s speed is 150rpm; (ii) the speed of the machine at resonance; (iii) the displacement at resonance. Note: Take the following values: - EI=2010 3kNm 2- M=20 tonnes: - Consider BC as infinitely rigid. Find the fugacity (kPa) of compressed water at 25 C and 1 bar. For H2O: Tc=647 K, Pc = 22.12 MPa, = 0.344 When we use the term ideal fluid, we neglect: O density O pressure O energy conservation O friction and we assume laminar flow Calculatoralloweda) Calculate the cross-sectional area of this cylinder.b) Calculate the volume of this cylinder.Give your answers to 1 d. p.Bookwork code: R9617 cm15 cm The Line Impedance Stabilization Network (LISN) measures the noise currents that exit on the AC power cord conductor of a product to verify its compliance with FCC and CISPR 22 from 150 kHz to 30 MHz. (i) (ii) Briefly explain why LISN is needed for a conducted emission measurement. (6 marks) Illustrate the use of a LISN in measuring conducted emissions of a product why would someone research about drug abuse What is the base of power of Marie Curie? Discuss and explain itfrom five bases of power perspective?