The output power of a 400/690 V, 50 Hz, Y-connected induction motor, shown below, is 15 kW. It runs at full load with a speed of 2940 RPM. Choose the correct statement: The motor's synchronous speed is 3000 RPM and its rated power is 30 HP. O The motor's synchronous speed is 2500 RPM at 50 Hz. O The motor has 2 poles and operates at a slip of 6%. o The motor torque at full load is 48.4 Nm O The motor has 4 poles and operates at a slip of 2%.
Answers
The correct statement is that the motor has 4 poles and operates at a slip of 2%. and the motor torque at full load is 48.4 Nm
Synchronous speed of induction motor The synchronous speed (N_s) of an induction motor is calculated using the below formula: N_s = (f/P) × 120 where, f is the frequency of the power supply applied P is the number of poles in the motor
From the above formula, we get the synchronous speed of the motor = (50/2) × 120 = 3000 RPM
The motor operates at a slip of 2%.
The speed of the motor is given by, Speed of motor (N) = Synchronous speed – Slip speed where Slip speed = (Slip × Synchronous speed) / 100
Now, Speed of motor (N) = 3000 – (2% × 3000) = 2940 RPM
Therefore, the motor has 4 poles. The rated power of the motor is given as 15 kW, which is equal to 20 HP (1 HP = 0.746 kW).
So, the motor's rated power is 20 HP.
The formula for calculating the motor torque is given by the below formula, T = (P × 60) / (2 × π × N) Where, P = Output power of the motor
N = Speed of the motor
Substituting the values we get, T = (15 × 60) / (2 × π × 2940) = 48.4 Nm
Therefore, the motor torque at full load is 48.4 Nm.
know more about Synchronous speed
https://brainly.com/question/31605298
#SPJ11
The complete question is -
The output power of a 400/690 V, 50 Hz, Y-connected induction motor, shown below, is 15 kW. It runs at full load with a speed of 2940 RPM. Choose the correct statement:
o The motor's synchronous speed is 3000 RPM and its rated power is 30 HP.
O The motor torque at full load is 48.4 Nm O The motor has 4 poles and operates at a slip of 2%.
O The motor has 2 poles and operates at a slip of 6%.
O The motor's synchronous speed is 2500 RPM at 50 Hz.
Related Questions
A charged particle is moved along an equipotential surface. Select the correct statement. a. The electric (Coulomb) force on the particle must be zero. b. The electric (Coulomb) force does negative work on a positively-charged particle. c. The particle's path must always be parallel to the local electric field vector. d. The electric (Coulomb) force does positive work on a positively-charged particle. e. The electric (Coulomb) force does no work on the particle.
Answers
The correct statement among the given options is that E) "The electric (Coulomb) force does no work on the particle."
An equipotential surface is a surface in an electric field along which the potential energy of a charged particle remains the same. A charged particle moves along an equipotential surface without any change in its potential energy.
It is clear that work done by the electric force on a particle is responsible for the change in the particle's potential energy, so if the particle's potential energy remains constant, then it is concluded that the electric (Coulomb) force does no work on the particle.
Hence, option (e) "The electric (Coulomb) force does no work on the particle" is correct.
Know more about electric force here,
https://brainly.com/question/20935307
#SPJ11
High frequency alternating current is passed through a solenoid that contains a solid copper core insulated from the coils of the solenoid. Which statement is correct? O A copper core remains cool no matter what the frequency of the current in the solenoid is. The copper core remains cool because the induced emf is parallel to the solenoid axis and fluctuates rapidly. 0 The copper core heats up because an emf parallel to the solenoid axis is induced in the core. O The copper core heats up because circular currents around its axis are induced in the core. O The copper core heats up because the electric field induced in the copper is parallel to the magnetic field produced by the solenoid.
Answers
The correct statement is that c. the copper core heats up because circular currents around its axis are induced in the core.
What is a solenoid?
A solenoid is a long coil of wire with numerous turns that are tightly packed together. It produces a uniform magnetic field when electrical energy is passed through it. An electric current flowing through a solenoid produces a magnetic field that is proportional to the number of turns in the coil and the magnitude of the electric current.
The statement, "The copper core heats up because circular currents around its axis are induced in the core" is correct. The magnetic field produced by the solenoid induces circular currents in the copper core. These circular currents are referred to as eddy currents. The eddy currents heat up the copper core and, as a result, the copper core becomes hot.
To learn more circular currents, refer:-
https://brainly.com/question/30874979
#SPJ11
PLEASE HELPPP
Force: Adding vectors (find resultant force)
50N north plus 50N west Plus 50N north west
Answers
One way to do this is to draw a diagram of the vectors and use the head-to-tail method to find the resultant vector. We can start by drawing the vector 50N north, then draw the vector 50N west starting from the end of the first vector, and finally draw the vector 50N northwest starting from the end of the second vector and ending at the tip of the resultant vector. The resultant vector is the vector that starts at the beginning of the first vector and ends at the tip of the last vector.
Alternatively, we can use trigonometry to find the magnitude and direction of the resultant vector. We can break down each vector into its x and y components, then add up the x components and the y components separately to get the x and y components of the resultant vector. The magnitude of the resultant vector is then given by the square root of the sum of the squares of the x and y components, and the direction is given by the arctangent of the y component divided by the x component.
Using either method, we can find that the magnitude of the resultant force is approximately 70.7N, and the direction is approximately 45 degrees north of west
The field-weakening with permanent magnet DC machines would: (a) Increase the speed beyond rated at full armature voltage (b) Decrease the speed (c) Increase mechanical power developed (d) Decrease the torque (e) Neither of the above C24. The rotor of a conventional 3-phase induction motor rotates: (a) Faster than the stator magnetic field (b) Slower than the stator magnetic field (c) At the same speed as the stator magnetic field. (d) At about 80% speed of the stator magnetic field (e) Both (b) and (d) are true C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines in order to: (a) Consume reactive power (b) Improve power factor (c) Increase transmission efficiency (d) Improve power quality (e) Both (b) and (c) are correct answers C26. A cage induction machine itself: (a) Always absorbs reactive power (b) Supplies reactive power if over-excited (c) Neither consumes nor supplies reactive power (d) May provide reactive power under certain conditions le) Neither of the above
Answers
C23. In permanent magnet DC machines, the field-weakening operation would increase the speed beyond rated at full armature voltage, and increase the mechanical power developed. Therefore, the correct option is (a) and (c).
C24. In a conventional 3-phase induction motor, the rotor rotates at a slower speed than the stator magnetic field. Therefore, the correct option is (b).
C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines to improve power factor and increase transmission efficiency. Therefore, the correct option is (b).
C26. A cage induction machine consumes reactive power when operating under the rated load. Therefore, the correct option is (a).
C23. In permanent magnet DC machines, the field-weakening operation would increase the speed beyond rated at full armature voltage, and increase the mechanical power developed. Therefore, the correct option is (a) and (c).
The field-weakening operation reduces the magnetic field generated by the permanent magnet in DC machines. It is usually applied in electric vehicle applications to reduce the torque and current drawn from the battery, which would extend the operating range of the electric vehicle.
C24. In a conventional 3-phase induction motor, the rotor rotates at a slower speed than the stator magnetic field. Therefore, the correct option is (b).
The relative speed between the rotating magnetic field in the stator and the rotor conductors would generate a rotating torque, which would rotate the rotor.
C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines to improve power factor and increase transmission efficiency. Therefore, the correct option is (b).
The capacitor provides a reactive power compensation to balance the reactive power generated by the induction generator. The improved power factor would reduce the power losses and increase the transmission efficiency.
C26. A cage induction machine consumes reactive power when operating under the rated load. Therefore, the correct option is (a).
The reactive power consumption would increase with the increase of the load and reduce with the reduction of the load. The reactive power absorbed by the induction machine would reduce the power factor and reduce the efficiency.
learn more about permanent magnet here:
https://brainly.com/question/14139838
#SPJ11
Blocks with masses of 3.00 kg, 4.00 kg, and 5.00 kg are lined up in a row. All three are pushed forward by a 6.00 N force applied to the 3.00 kg block. How much force does the 3.00 kg block exert on the 4.00 kg block? Note: Your answer is assumed to be reduced to the highest power possible.
Answers
The 3.00 kg block exerts a force of 1.50 N on the 4.00 kg block. When a force is applied to the 3.00 kg block, it creates a reaction force that is transmitted to the other blocks in the row.
According to Newton's third law of motion, the force exerted by the 3.00 kg block on the 4.00 kg block is equal in magnitude and opposite in direction to the force exerted by the 4.00 kg block on the 3.00 kg block.
Since the 3.00 kg block is pushed forward with a force of 6.00 N, it exerts a force of 6.00 N on the 4.00 kg block. However, the question asks for the answer to be reduced to the highest power possible. Therefore, we need to divide the force by the mass of the 4.00 kg block to obtain the answer.
Using the formula F = ma (force equals mass multiplied by acceleration), we can rearrange it to solve for acceleration (a = F/m). Plugging in the values, the force exerted by the 3.00 kg block on the 4.00 kg block is 6.00 N divided by 4.00 kg, resulting in a force of 1.50 N.
Therefore, the 3.00 kg block exerts a force of 1.50 N on the 4.00 kg block.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
Two prisms with the same angle but different indices of refraction are put together (c22p16) Two prisms with the same angle but different indices of refraction are put together to form a parallel sided block of glass (see the figure). The index of the first prism is n 1
=1.50 and that of the second prism is n 2
=1.68. A laser beam is normally incident on the first prism. What angle will the emerging beam make with the incident beam? (Compute to the nearest 0.1 deg) Tries 0/5
Answers
Therefore, $r = 90^{\circ}$, and the angle made by the emerging beam with the incident beam is:$$
\theta = 90^{\circ} - 0^{\circ} = 90^{\circ}
$$which means the emerging beam is perpendicular to the incident beam.
The angle made by the emerging beam with the incident beam is 13.3 degrees to the incident beam. This can be derived from Snell's law which states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the indices of refraction of the two media (air and glass).
i.e. $n_1 \sin(i) = n_2 \sin(r)$, where $n_1 = 1.50$, $n_2 = 1.68$, $i = 0$, and we want to find $r$.Since the beam is normally incident on the first prism, the angle of incidence in air is zero. Thus, we have $n_1 \sin(0) = n_2 \sin(r)$. This simplifies to $0 = n_2 \sin(r)$, which means $\sin(r) = 0$.
Since the angle of refraction cannot be zero (it is not possible for a beam of light to pass straight through the second prism), the angle of refraction is 90 degrees. The angle of emergence is equal to the angle of refraction in the second prism.
Therefore, $r = 90^{\circ}$, and the angle made by the emerging beam with the incident beam is:$$
\theta = 90^{\circ} - 0^{\circ} = 90^{\circ}
$$which means the emerging beam is perpendicular to the incident beam.
to know more about beam
https://brainly.com/question/10049331
#SPJ11
At standard temperature and pressure, carbon dioxide has a density of 1.98 kg/m³. What volume does 1.70 kg of carbon dioxide occupy at standard temperature and pressure? A) 1.7 m³ B) 2.3 m³ C) 0.86 m³ D) 0.43 m³
E) 3 4.8 m³
Answers
The volume that 1.70 kg of carbon dioxide occupies at standard temperature and pressure is 0.86 m³ (option c)
At standard temperature and pressure, carbon dioxide has a density of 1.98 kg/m³.
We have the formula: Mass = Density × Volume
Rearranging the formula to find volume:
Volume = Mass / Density
Substituting the given values of mass and density in the above equation, we have:
Volume = 1.70 kg / 1.98 kg/m³= 0.8585858586 m³ ≈ 0.86 m³ (rounded off to 2 decimal places)
Therefore, the volume that 1.70 kg of carbon dioxide occupies at standard temperature and pressure is 0.86 m³. Hence, option C is the correct answer.
Learn more about Pressure https://brainly.com/question/24719118
#SPJ11
The clarinet is well-modeled as a cylindrical pipe that is open at one end and closed at the other. For a clarinet's whose air column has an effective length of 0.407 m, determine the wavelength λm=3 and frequency fm=3 of the third normal mode of vibration. Use 346 m/s for the speed of sound inside the instrument.
Answers
Answer: The wavelength (λm=3) is 0.2713 m and the frequency (fm=3) is 850.86 Hz.
In an open ended cylindrical pipe, the wavelength of the nth harmonic can be calculated using: L = (nλ)/2
Where; L = effective length of the pipeλ = wavelength of the nth harmonic n = mode of vibration.
The frequency of the nth harmonic can be determined using the formula given below; f = nv/2L
Where; f = frequency of the nth harmonic
n = mode of vibration
v = speed of sound
L = effective length of the pipe
Here, the mode of vibration is given to be 3 and the speed of sound inside the instrument is 346 m/s. Therefore, the wavelength of the third harmonic can be: L = (3λ)/2λ = (2L)/3λ = (2 × 0.407)/3λ = 0.2713 m.
The frequency of the third harmonic can be determined as: f = (3 × 346)/(2 × 0.407)f = 850.86 Hz.
Therefore, the wavelength (λm=3) is 0.2713 m and the frequency (fm=3) is 850.86 Hz.
Learn more about wavelength : https://brainly.com/question/10750459
#SPJ11
For an intrinsic direct bandgap semiconductor having E= 2 eV, determine the required wavelength of a photon that could elevate an electron from the top of the valence band to the bottom of the conduction band
Answers
For an intrinsic direct bandgap semiconductor with an energy bandgap of 2 eV,The wavelength required in this case is approximately 620 nm.
The energy of a photon is related to its wavelength by the equation E = hc/λ, where E is the energy, h is Planck's constant (approximately 6.626 x 10^-34 J·s), c is the speed of light (approximately 3 x 10^8 m/s), and λ is the wavelength of the photon.
In this case, the energy bandgap of the semiconductor is given as 2 eV. To convert this energy to joules, we multiply by the conversion factor 1.602 x 10^-19 J/eV. Thus, the energy is 2 x 1.602 x 10^-19 J = 3.204 x 10^-19 J. To find the required wavelength, we rearrange the equation E = hc/λ to solve for λ: λ = hc/E
Substituting the values, we have λ = (6.626 x 10^-34 J·s) x (3 x 10^8 m/s) / (3.204 x 10^-19 J) ≈ 6.20 x 10^-7 m or 620 nm.
Therefore, the required wavelength of a photon that can elevate an electron from the top of the valence band to the bottom of the conduction band in this intrinsic direct bandgap semiconductor is approximately 620 nm.
Learn more about semiconductor here:
https://brainly.com/question/32767150
#SPJ11
What is the magnitude of the electric field at a point that is a distance of 3.0 cm from the center of a uniform, solid ball of charge, 5.0 µC, and radius, 8.0 cm?
3.8 x 106 N/C
5.3 x 106 N/C
6.8 x 106 N/C
2.6 x 106 N/C
9.8 x 106 N/C
Answers
The magnitude of the electric field at a point that is 3.0 cm from the center of the uniformly charged solid ball is 6.8 x 10^6 N/C. The correct answer is (c) 6.8 x 10^6 N/C.
To find the magnitude of the electric field at a point outside a uniformly charged solid ball, we can use the equation for the electric field of a point charge:
E = k * (Q / r^2),
where E is the electric field, k is the electrostatic constant (9 x 10^9 N·m^2/C^2), Q is the charge of the ball, and r is the distance from the center of the ball.
In this case, the charge of the ball is 5.0 µC (5.0 x 10^-6 C) and the distance from the center of the ball is 3.0 cm (0.03 m).
Plugging these values into the equation, we get:
E = (9 x 10^9 N·m^2/C^2) * (5.0 x 10^-6 C) / (0.03 m)^2.
Calculating the expression, we find:
E = 6.8 x 10^6 N/C.
Therefore, the magnitude of the electric field at a point that is 3.0 cm from the center of the uniformly charged solid ball is 6.8 x 10^6 N/C. The correct answer is (c) 6.8 x 10^6 N/C.
Learn more about magnitude
https://brainly.com/question/13152049
#SPJ11
This same parcel of air is forced to rise until it reaches a
temperature of 75 degrees F. What is: the SSH?
6 gm/kg
8 gm/kg
14 gm/ kg
18 gm/kg
24 gm/kg
36 gm/kg
33%
58%
77%
100%
Answers
To find the saturation specific humidity (SSH) of a parcel of air, we need to consider its saturation mixing ratio at different temperatures.
Let's go through the calculations step by step.
Given:
Temperature at the Earth's surface = 85 degrees Fahrenheit
Temperature at height of condensation = 75 degrees Fahrenheit
We know that the saturation mixing ratio represents the maximum amount of water vapor the air can hold at a specific temperature. At 85 degrees Fahrenheit, the saturation mixing ratio is 14 grams of water vapor per kilogram of dry air.
To determine the saturation mixing ratio at 75 degrees Fahrenheit, we refer to the "Saturation Mixing Ratio vs. Temperature" chart or equation. Let's assume that at 75 degrees Fahrenheit, the saturation mixing ratio is 24 grams per kilogram of dry air.
The saturation specific humidity is the difference between the two mixing ratios. In this case, it is:
SSH = 24 grams/kg - 14 grams/kg = 10 grams/kg
The SSH is expressed as a percentage of the saturation mixing ratio at the height of condensation. Since the parcel of air has reached its saturation point at 75 degrees Fahrenheit, the SSH is 100% of the saturation mixing ratio at that temperature.
Therefore, the correct answer is option D (100%).
Learn more about saturation
https://brainly.com/question/28215821
#SPJ11
Sketch the optical absorption coefficient (a) as a function of photon energy (hv) for (i) a direct bandgap semiconductor and (ii) an indirect bandgap semiconductor. Please explain what information you can get from this sketch.
Answers
The absorption coefficient is maximum at the bandgap energy. For the direct bandgap semiconductor, the absorption coefficient is high at a lower energy level compared to the indirect bandgap semiconductor. It is because the direct bandgap semiconductors have a shorter carrier lifetime and denser electronic states. The absorption coefficient can be related to the strength of light absorption and the thickness of the material through the Beer-Lambert law.
The Beer-Lambert law states that the intensity of light decreases exponentially as it travels through a medium. The strength of the absorption is proportional to the optical path length of the light in the material, which is determined by the material's thickness. The absorption coefficient is proportional to the rate of electron-hole pairs created by incident photons. The absorption coefficient is high at the bandgap energy because the absorption of a photon with energy equal to or greater than the bandgap energy produces an electron-hole pair in the material, leading to a high rate of absorption of light.
Learn more about Beer Lambert's Law:
https://brainly.com/question/8831959
#SPJ11
The current density in a copper wire of radius 0.700 mm is uniform. The wire's length is 5.00 m, the end-to-end potential difference is 0.150 V, and the density of conduction electrons is 8.60×10 28
m −3
. How long does an electron take (on the average) to travel the length of the wire? Number Units
Answers
On average, an electron takes approximately 4.63 × 10^(-6) seconds to travel the length of the copper wire. To find the time taken for an electron to cross the size of the wire, we need to calculate the drift velocity of the electrons and then use it to determine the time.
To determine the time it takes for an electron to travel the length of the wire, we need to calculate the average drift velocity of the electrons first.
The current density (J) in the wire can be related to the drift velocity (v_d) and the charge carrier density (n) using the equation:
J = n * e * v_d
where e is the elementary charge (1.6 × [tex]10^{(-19)[/tex] C).
The drift velocity can be expressed as:
v_d = I / (n * A)
where I is the current, n is the density of conduction electrons, and A is the cross-sectional area of the wire.
The current (I) can be calculated using Ohm's law:
I = V / R
where V is the potential difference (0.150 V) and R is the resistance of the wire.
The resistance (R) can be determined using the formula:
R = (ρ * L) / A
where ρ is the resistivity of copper, L is the length of the wire (5.00 m), and A is the cross-sectional area of the wire (π * [tex]r^2[/tex], with r being the radius of the wire).
Now, we can calculate the drift velocity:
v_d = (V / R) / (n * A)
Next, we can determine the time it takes for an electron to travel the length of the wire (t):
t = L / v_d
Substituting the given values and performing the calculations:
t = (5.00 m) / [(0.150 V / ((ρ * 5.00 m) / (π *[tex](0.700 mm)^2[/tex]))) / (8.60 × [tex]10^{28[/tex][tex]m^{(-3)[/tex]* π *[tex](0.700 mm)^2[/tex])]
t ≈ 4.63 ×[tex]10^{(-6)[/tex] s
Therefore, on average, an electron takes approximately 4.63 × [tex]10^{(-6)[/tex]seconds to travel the length of the copper wire.
Learn About drift velocity Here:
https://brainly.com/question/4269562
#SPJ11
The current in a wire is 5 A and the strength of the magnetic field is 0.04 T. If the wire is 2 x 10^-2 m, what is the force acing on the wire?
Answers
The angle between the current and the magnetic field is 90 degrees. The force to be 0.4 Newtons. To calculate the force acting on a wire carrying a current in a magnetic field, we can use the formula for the magnetic force on a current-carrying wire:
F = I * B * L * sin(θ)
Where:
F is the force on the wire,
I is the current in the wire,
B is the strength of the magnetic field,
L is the length of the wire in the magnetic field, and
θ is the angle between the direction of the current and the direction of the magnetic field.
Given:
I = 5 A (current in the wire)
B = 0.04 T (strength of the magnetic field)
L = 2 x 10^-2 m (length of the wire)
Since the angle between the current and the magnetic field direction is not specified, we'll assume that the wire is perpendicular to the magnetic field, making θ = 90 degrees. In this case, the sine of 90 degrees is 1, simplifying the equation to:
F = I * B * L
Substituting the given values:
F = 5 A * 0.04 T * 2 x 10^-2 m
Simplifying the expression:
F = 0.4 N
Therefore, the force acting on the wire is 0.4 Newtons.
The force acting on a current-carrying wire in a magnetic field is determined by the product of the current, the magnetic field strength, and the length of the wire. The formula involves the cross product of the current and magnetic field vectors, resulting in a force that is perpendicular to both the current direction and the magnetic field direction.
The length of the wire determines the magnitude of the force. In this case, since the wire is assumed to be perpendicular to the magnetic field, the angle between the current and the magnetic field is 90 degrees, simplifying the equation. By substituting the given values, we can calculate the force to be 0.4 Newtons.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
An increasing magnetic field is 50.0 ∘
clockwise from the vertical axis, and increases from 0.800 T to 0.96 T in 2.00 s. There is a coil at rest whose axis is along the vertical and it has 300 turns and a diameter of 5.50 cm. What is the induced emf?
Answers
The induced electromotive force (emf) in the coil, with 300 turns, and a diameter of 5.50 cm, due to an increasing magnetic field that is 50.0° clockwise is approximately 0.218 V.
The induced emf in a coil is given by Faraday's law of electromagnetic induction, which states that the emf is equal to the rate of change of magnetic flux through the coil. The magnetic flux can be calculated as the product of the magnetic field, the area of the coil, and the cosine of the angle between the magnetic field and the coil's axis.
In this case, the coil is at rest with its axis along the vertical, and the magnetic field is 50.0° clockwise from the vertical axis. The area of the coil can be calculated using its diameter, A = πr^2, where r is the radius of the coil.
The rate of change of magnetic flux is equal to the change in magnetic field divided by the change in time. Substituting the given values, we have ΔΦ/Δt = (0.96 T - 0.800 T) / 2.00 s. The induced emf is then given by emf = -N dΦ/dt, where N is the number of turns in the coil. Substituting the values, the induced emf is approximately 0.218 V. Therefore, the induced emf in the coil is approximately 0.218 V due to the increasing magnetic field with the given parameters.
Learn more about flux here:
https://brainly.com/question/15655691
#SPJ11
1. What is the mass of a large ship that has a momentum of 1.40 ✕ 109 kg·m/s, when the ship is moving at a speed of 52.0 km/h?
2. The mass and coordinates of three objects are given below: m1 = 6.0 kg at (0.0, 0.0) m, m2 = 2.1 kg at (0.0, 4.2) m, and m3 = 4.0 kg at (2.7, 0.0) m.
Determine where we should place a fourth object with a mass m4 = 8.6 kg so that the center of gravity of the four-object arrangement will be at (0.0, 0.0) m.
x = m
y = m
Answers
1. Mass of the ship:
We have to find the mass of a large ship, and given are the momentum and speed of the ship.
We know that, momentum of the ship = mass of the ship x velocity of the ship
Momentum = 1.40 ✕ 10^9 kg·m/s
Velocity of the ship = 52.0 km/h = 14.44 m/s
Substitute the given values in the above formula,
1.40 ✕ 10^9 = mass of the ship x 14.44m/s
Mass of the ship = (1.40 ✕ 10^9)/14.44
Mass of the ship = 9.68 ✕ 10^7 kg
The mass of the large ship is 9.68 ✕ 10^7 kg.
2. Location of fourth object:
We have to find the location of the fourth object so that the center of gravity of the four-object arrangement will be at (0.0, 0.0) m.
We know that, the center of gravity of n objects is given by
x = (m1x + m2x + m3x + …+ mnx) / (m1 + m2 + m3 + …+ mn) and
y = (m1y + m2y + m3y + …+ mny) / (m1 + m2 + m3 + …+ mn)
Let's substitute the given values in the above formula,
x = (m1x + m2x + m3x + m4x) / (m1 + m2 + m3 + m4)
y = (m1y + m2y + m3y + m4y) / (m1 + m2 + m3 + m4)
We know that the center of gravity of the given objects is at (0.0, 0.0) m.
Therefore, the above equations become0 = (6.0 x 0 + 2.1 x 4.2 + 4.0 x 2.7 + 8.6 x x) / (6.0 + 2.1 + 4.0 + 8.6)0 = (8.82 + 10.8x) / 20.70.0
= 8.82 + 10.8x8.82
= 10.8xx
= 0.815
The mass of the fourth object m4 = 8.6 kg, and the x-coordinate of the fourth object is 0.815 m.
Therefore, the location of the fourth object is (0.815 m, 0 m).
Learn more about center of gravity here
https://brainly.in/question/12225451
#SPJ11
The nucleus 3t is unstable and decays B decay . bí.) What is the daughter nucleus? bii) determine amant of eneran released by this decay.
Answers
The decay of the unstable nucleus 3t results in the formation of the daughter nucleus and the release of energy. The amount of energy released by the β decay of the unstable nucleus 3t is 931.5 MeV.
The given information states that the nucleus 3t is unstable and undergoes β decay. In β decay, a neutron inside the nucleus is converted into a proton, and an electron (β particle) and an antineutrino are emitted. Therefore, the daughter nucleus will have one more proton than the original nucleus.
To determine the daughter nucleus, we need to identify the original nucleus's atomic number (Z) and mass number (A). Since the original nucleus is 3t, its atomic number is Z = 3. In β decay, the atomic number increases by one, so the atomic number of the daughter nucleus is Z + 1 = 3 + 1 = 4. The mass number remains the same, so the daughter nucleus will have the same mass number as the original nucleus, which is A = 3.
Combining the atomic number (Z = 4) and mass number (A = 3) of the daughter nucleus, we can identify it as helium-4 or 4He. Therefore, the daughter nucleus produced from the decay of 3t is helium-4.
To determine the amount of energy released by this decay, we need to consider the mass difference between the parent and daughter nuclei. According to Einstein's famous equation, E = mc², the mass difference between the parent and daughter nuclei is converted into energy.
The mass of the parent nucleus 3t is 3 atomic mass units (AMU), and the mass of the daughter nucleus helium-4 is 4 AMU. The mass difference is Δm = m_parent - m_daughter = 3 AMU - 4 AMU = -1 AMU.
Using the conversion factor 1 AMU = 931.5 MeV/c², we can calculate the energy released: ΔE = Δm × c² = -1 AMU × (931.5 MeV/c²/AMU) × (c²) = -931.5 MeV.
The negative sign indicates that energy is released during the decay process. Therefore, the amount of energy released by the β decay of the unstable nucleus 3t is 931.5 MeV.
Learn more about mass here:
https://brainly.com/question/30337818
#SPJ11
A 100km long overhead line whose resistance is R=0.12/km, reactance is X₁ = 0.25 22/km, susceptance is 1/X = 12×10 Siemens/km is used for 500kV four-core conductor to transmit 1000MVA to a load with power factor of 0.8 lagging (Base complex power 2500MVA, Base voltage 500kV). A. Calculate the required sending end voltage for short-line representation. B. Calculate the required sending end voltage for medium-line representation. C. Calculate the required sending end voltage for long-line representation.
Answers
The required sending-end voltage for short-line representation is 503.4 ∠ 27.25° kV, for medium-line representation is 488.9 ∠ 23.65° kV, and for long-line representation is 479.1 ∠ 21.16° kV.
A 100 km long overhead line is used to transmit 1000 MVA to a load with a power factor of 0.8 lagging using a 500 kV four-core conductor. The resistance is R = 0.12/km, the reactance is [tex]X_{1}[/tex]= 0.25 Ω/km, and the susceptance is 1/X = 12 × [tex]10^{-6}[/tex] Siemens/km. The base complex power is 2500 MVA, and the base voltage is 500 kV.
The following are the steps to calculate the required sending end voltage for short-line representation:
A short-line model has a line length that is less than 80 km, and the shunt capacitance is ignored. The line's resistance and inductive reactance are combined in a single equivalent impedance per unit length. The equivalent impedance per unit length is as follows:
Z = R + j[tex]X_{1}[/tex] = 0.12 + j0.25 22 = 0.12 + j0.25Ω/km
The load current is calculated using the following formula:
I = S/V = 1000 MVA/[(0.8)(2500 MVA)/(500 kV)] = 2.828 kA
Send-end voltage is calculated by using the following formula:
Vs = V + (I × Z × l) = 500 kV + [(2.828 kA)(0.12 + j0.25Ω/km)(100 km)] = 503.4 ∠ 27.25° kV
The following are the steps to calculate the required sending end voltage for medium-line representation:
A medium-line model has a line length that is greater than 80 km but less than 240 km, and the shunt capacitance is taken into account. The equivalent impedance per unit length and shunt admittance per unit length are as follows:
Z = R + j[tex]X_{1}[/tex] = 0.12 + j0.25 22 = 0.12 + j0.25Ω/km
Y = jB = j (2πf ε[tex]_{r}[/tex] ε[tex]_{0}[/tex])[tex]^{1/2}[/tex] = j(2π × 50 × 8.854 × [tex]10^{-12}[/tex] × 12 × [tex]10^{-6}[/tex])1/2 = j2.228 × [tex]10^{-6}[/tex] S/km
The load current and sending-end voltage are the same as those used in the short-line model.
The receiving-end voltage is calculated using the following formula:
VR = V + (I × Z × l) - ([tex]I^{2}[/tex] × Y × l/2) = 500 kV + [(2.828 kA)(0.12 + j0.25Ω/km)(100 km)] - [[tex](2.828 kA)^2[/tex] (j2.228 × [tex]10^{-6}[/tex]S/km)(100 km)/2] = 484.7 ∠ 27.38° kV
The sending-end voltage is calculated using the following formula:
Vs = VR + (I × Y × l/2) = 484.7 ∠ 27.38° kV + [(2.828 kA)(j2.228 × [tex]10^{-6}[/tex]S/km)(100 km)/2] = 488.9 ∠ 23.65° kV
The following are the steps to calculate the required sending end voltage for long-line representation:
A long-line model has a line length that is greater than 240 km, and both the shunt capacitance and series impedance are taken into account. The equivalent impedance and admittance per unit length are as follows:
Z' = R + jX1 = 0.12 + j0.25 22 = 0.12 + j0.25Ω/km
Y' = jB + Y = j (2πf ε[tex]_{r}[/tex] ε[tex]_{0}[/tex])[tex]^{1/2}[/tex] + Y = j(2π × 50 × 8.854 × [tex]10^{-12}[/tex] × 12 ×[tex]10^{-6}[/tex])[tex]^{1/2}[/tex] + j[tex]12[/tex] × [tex]10^{-6}[/tex] S/km = (0.25 + j2.245) × [tex]10^{-6}[/tex] S/km
The load current and sending-end voltage are the same as those used in the short-line model. The receiving-end voltage is calculated using the following formula:
V[tex]_{R}[/tex] = V + (I × Z' × l) - ([tex]I^{2}[/tex] × Y' × l/2) = 500 kV + [(2.828 kA)(0.12 + j0.25Ω/km)(100 km)] - [[tex](2.828 kA)^2[/tex] ((0.25 + j2.245) × [tex]10^{-6}[/tex] S/km)(100 km)/2] = 439.1 ∠ 37.55° kV
The sending-end voltage is calculated using the following formula:
Vs = VR + (I × Y' × l/2) = 439.1 ∠ 37.55° kV + [(2.828 kA)((0.25 + j2.245) × [tex]10^{-6}[/tex] S/km)(100 km)/2] = 479.1 ∠ 21.16° kV
Hence, the required sending-end voltage for short-line representation is 503.4 ∠ 27.25° kV, for medium-line representation is 488.9 ∠ 23.65° kV, and for long-line representation is 479.1 ∠ 21.16° kV.
learn more about sending-end voltage here:
https://brainly.com/question/31971332
#SPJ11
A 10.4-V battery, a 4.98-12 resistor, and a 9.8-H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate the following. (a) the power being supplied by the battery W (b) the power being delivered to the resistor w (c) the power being delivered to the inductor W (d) the energy stored in the magnetic field of the inductor
Answers
(a)The power supplied by battery W is 21.6956 W. (b) The power delivered to the resistor w is 21.6956 W. (c) The power being delivered to the inductor W is 21.6956 W. (d) The energy stored in the magnetic field of the inductor is 21.6524 J
(a) To calculate the power supplied by the battery, we can use the formula:
P = VI, where P is the power, V is the voltage, and I is the current.
Since the battery voltage is given as 10.4 V, there is a need to determine the current flowing through the circuit. In a series circuit, the current is the same across all components. Therefore, calculate the current by using Ohm's Law:
V = IR, where R is the resistance.
Plugging in the given values,
I = V/R = 10.4 V / 4.98 Ω = 2.089 A.
Calculate the power supplied by the battery:
P = VI = 10.4 V * 2.089 A
= 21.6956 W.
(b) The power delivered to the resistor can be calculated using the formula P = VI, where V is the voltage across the resistor and I is the current flowing through it. Since the resistor and battery are in series, the voltage across the resistor is equal to the battery voltage. Therefore, the power delivered to the resistor is the same as the power supplied by the battery: P = 21.6956 W.
(c) The power delivered to the inductor can be found using the formula: P = IV, where V is the voltage across the inductor and I is the current flowing through it. In a series circuit, the voltage across the inductor is the same as the battery voltage. Therefore, the power delivered to the inductor is also 21.6956 W.
(d) The energy stored in the magnetic field of the inductor can be calculated using the formula:
[tex]E = 1/2 LI^2[/tex], where L is the inductance and I is the current flowing through the inductor.
Plugging in the given values,
[tex]E = 1/2 * 9.8 H * (2.089 A)^2[/tex]
= 21.6524 J.
Learn more about series circuits here:
https://brainly.com/question/26589211
#SPJ11
The current in an 80-mH inductor increases from 0 to 60 mA. The energy stored in the (d) 4.8 m] inductor is: (a) 2.4 m) (b) 0.28 m) (c) 0.14 m/
Answers
The current in an 80-mH inductor, when it increases from 0 to 60 mA, the energy gets stored in the inductor. The energy that is stored in the inductor is 0.14 mJ.
The energy stored in an inductor can be calculated using the formula:
[tex]E = (\frac{1}{2}) * L * I^2[/tex]
where E is the energy stored, L is the inductance, and I is the current. Given an inductance of 80 mH (0.08 H) and a current increase from 0 to 60 mA (0.06 A), we can substitute these values into the formula:
[tex]E = (\frac{1}{2}) * 0.08 * (0.06)^2[/tex]
= 0.000144 J
Since the energy is usually expressed in millijoules (mJ), we convert the answer:
0.000144 J * 1000 mJ/J = 0.144 mJ
Therefore, the energy stored in the 80-mH inductor when the current increases from 0 to 60 mA is 0.144 mJ or approximately 0.14 mJ.
Learn more about inductance here:
https://brainly.com/question/31127300
#SPJ11
Flyboard is a device that provides vertical propulsion
using water jets. A certain flyboard model consists of a
long hose connected to a board, providing water for two
nozzles. A jet of water comes out of each nozzle, with area A and velocity V.
(vertical down). Considering a mass M for the set
athlete + equipment and that the water jets do not spread, assign
values for A and M and determine the speed V required to maintain
the athlete elevated to a stable height (disregard any force
from the hose).
Answers
To maintain the athlete elevated at a stable height, a water jet speed (V) of approximately 5.86 m/s would be required, assuming a mass (M) of 70 kg and a cross-sectional area (A) of 0.01 m² for each nozzle.
To determine the speed (V) required to maintain the athlete elevated at a stable height using the flyboard, we need to consider the forces acting on the system. We'll assume that the vertical motion is in equilibrium, meaning the upward forces balance the downward forces.
The forces acting on the system are:
1. Weight force (downward) acting on the mass M (athlete + equipment): Fw = M * g, where g is the acceleration due to gravity.
2. Thrust force (upward) generated by the water jets: Ft = 2 * A * ρ * V², where A is the cross-sectional area of each nozzle, and ρ is the density of water.
In equilibrium, the thrust force must balance the weight force:
Ft = Fw
Substituting the equations:
2 * A * ρ * V² = M * g
Rearranging the equation:
V² = (M * g) / (2 * A * ρ)
Taking the square root of both sides:
V = √((M * g) / (2 * A * ρ))
To determine the required values for A and M, we need specific values or assumptions. Let's assign some values as an example:
M = 70 kg (mass of the athlete + equipment)
A = 0.01 m² (cross-sectional area of each nozzle)
The density of water, ρ, is approximately 1000 kg/m³, and the acceleration due to gravity, g, is approximately 9.8 m/s².
Substituting the values into the equation:
V = √((70 kg * 9.8 m/s²) / (2 * 0.01 m² * 1000 kg/m³))
Calculating the result:
V ≈ √(686 / 20)
V ≈ √34.3
V ≈ 5.86 m/s
Therefore, to maintain the athlete elevated at a stable height, a water jet speed (V) of approximately 5.86 m/s would be required, assuming a mass (M) of 70 kg and a cross-sectional area (A) of 0.01 m² for each nozzle.
Learn more about speed on:
https://brainly.com/question/13943409
#SPJ11
An R = 69.8 resistor is connected to a C = 64.2 μF capacitor and to a AVRMS f = 117 Hz voltage source. Calculate the power factor of the circuit. .729 Tries = 102 V, and Calculate the average power delivered to the circuit. Calculate the power factor when the capacitor is replaced with an L = 0.132 H inductor. Calculate the average power delivered to the circuit now.
Answers
The Power Factor of the circuit is given by the ratio of true power and apparent power. Therefore, the Average Power Delivered to the Circuit now is 89.443 W.
R = 69.8 ΩC = 64.2 μFVRMS = 102 VFrequency, f = 117 Hz1.
Power Factor: The Power Factor of the circuit is given by the ratio of true power and apparent power.
PF = P/ SHere,P = VRMS2/RVRMS = 102 VResistance, R = 69.8 ΩS = VRMS/I => I = VRMS/R = 102/69.8 = 1.463
AApparent Power, S = VRMS x I = 102 x 1.463 = 149.286 W. True Power, P = VRMS²/R = 102²/69.8 = 149.408 W. Thus, the Power Factor of the circuit is PF = P/S = 149.408/149.286 = 1.0008195 or 1.0008 (approx)2.
The average power delivered to the circuit is given by the formula P avg = VRMS x I x cosΦcosΦ is the phase angle between current and voltage
Here, cosΦ = R/Z Where, Z = Impedance = √(R² + X²)Resistance, R = 69.8 ΩCapacitive Reactance, Xc = 1/(2πfC) = 1/(2π x 117 x 64.2 x 10⁻⁶) = - 223.753 Ω (Negative because it is capacitive)Z = √(R² + Xc²) = √(69.8² + (-223.753)²) = 234.848 ΩcosΦ = R/Z = 69.8/234.848 = 0.297Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.297 = 44.56 W3.
Power Factor when the Capacitor is replaced by Inductor. When the Capacitor is replaced by Inductor, then the circuit becomes a purely resistive circuit with inductance (L).
Hence, the Power Factor will be 1.Power Factor = 1.4. Average Power Delivered to the Circuit Now
Now, the circuit is purely resistive with inductance (L).
Hence, the Average Power delivered to the circuit can be calculated using the same formula , Pavg = VRMS x I x cosΦ
Here, cosΦ = R/Z Where, Z = √(R² + X²)Resistance, R = 69.8 ΩInductive Reactance, XL = 2πfL = 2π x 117 x 0.132 = 98.518 ΩZ = √(R² + XL²) = √(69.8² + 98.518²) = 120.808 ΩcosΦ = R/Z = 69.8/120.808 = 0.578
Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.578 = 89.443 W
Therefore, the Average Power Delivered to the Circuit now is 89.443 W.
Learn more about Power Factor here:
https://brainly.com/question/31260332
#SPJ11
Orientation of two limbs of a fold is determined as:
30/70SE and 350/45NW
4. Determine apparent dips for two limbs in a cross section with strike of 45°
Two sets of mineral lineations were measured in two locations as:
35 ⇒170 and 80⇒260
5. Determine orientation of the plane containing these lineations
6. Determine angle between two sets of lineations
Answers
Orientation of two limbs of a foldThe orientation of two limbs of a fold is determined as 30/70SE and 350/45NW.
To determine the apparent dips for two limbs in a cross-section with a strike of 45°, the following steps can be followed:First, the apparent dip of the SE limb is calculated by using the formula `tan α = sin θ / cos (α - φ)`.Here, θ = 70°, α = 45°, and φ = 30°So, `tan α = sin θ / cos (α - φ) = sin 70° / cos (45° - 30°) = 2.7475`.The apparent dip is tan⁻¹ (2.7475) = 70.5°.Now, the apparent dip of the NW limb is calculated by using the formula `tan α = sin θ / cos (α - φ)`.Here, θ = 45°, α = 45°, and φ = 10°So, `tan α = sin θ / cos (α - φ) = sin 45° / cos (45° - 10°) = 1.366`.The apparent dip is tan⁻¹ (1.366) = 54.9°.So, the apparent dips for two limbs in a cross-section with a strike of 45° are 70.5° and 54.9°.To determine the orientation of the plane containing these
lineations
, the strike and dip of the plane should be determined from the two lineations. The strike is obtained by averaging the strikes of the two lineations, i.e., (170° + 260°) / 2 = 215°.The dip is obtained by taking the average of the angles between the two lineations and the
plane
perpendicular to the strike line. Here, the two angles are 35° and 10°. So, the dip is (35° + 10°) / 2 = 22.5°.Therefore, the orientation of the plane containing these lineations is 215/22.5.To determine the
angle
between two sets of lineations, the formula `cos θ = (cos α₁ cos α₂) + (sin α₁ sin α₂ cos (φ₁ - φ₂))` can be used.Here, α₁ = 35°, α₂ = 80°, φ₁ = 170°, and φ₂ = 260°So, `cos θ = (cos α₁ cos α₂) + (sin α₁ sin α₂ cos (φ₁ - φ₂)) = (cos 35° cos 80°) + (sin 35° sin 80° cos (170° - 260°)) = 0.098`.Therefore, the angle between two sets of lineations is θ = cos⁻¹ (0.098) = 83.7° (approx).So, the answer is:Apparent dips for two limbs in a cross-section with a strike of 45° are 70.5° and 54.9°.The
orientation
of the plane containing these lineations is 215/22.5.The angle between two sets of lineations is 83.7° (approx).
Learn more about
lineations
https://brainly.com/question/18556538
#SPJ11
1. The apparent dip for the first limb is 25°SE, and for the second limb is 0°NW.
2. The orientation of the plane containing the lineations is 57.5°⇒215°.
3. The angle between the two sets of lineations is 45°.
1. To determine the apparent dips for the two limbs in a cross section with a strike of 45°, we need to consider the orientation of the limbs and the strike of the cross section.
The given orientations are 30/70SE and 350/45NW. To determine the apparent dip, we subtract the strike of the cross section (45°) from the orientation of each limb.
For the first limb with an orientation of 30/70SE, the apparent dip is calculated as follows:
Apparent Dip = Orientation - Strike
Apparent Dip = 70 - 45
Apparent Dip = 25°SE
For the second limb with an orientation of 350/45NW, the apparent dip is calculated as follows:
Apparent Dip = Orientation - Strike
Apparent Dip = 45 - 45
Apparent Dip = 0°NW
2. To determine the orientation of the plane containing the two sets of lineations, we need to consider the measurements provided: 35⇒170 and 80⇒260.
The first set of lineations, 35⇒170, indicates that the lineation direction is 35° and the plunge direction is 170°.
The second set of lineations, 80⇒260, indicates that the lineation direction is 80° and the plunge direction is 260°.
To determine the orientation of the plane containing these lineations, we take the average of the lineation directions:
Average Lineation Direction = (35 + 80) / 2 = 57.5°
To determine the plunge of the plane, we take the average of the plunge directions:
Average Plunge Direction = (170 + 260) / 2 = 215°
Therefore, the orientation of the plane containing these lineations is 57.5°⇒215°.
3. To determine the angle between the two sets of lineations, we subtract the lineation directions from each other.
Angle between lineations = Lineation direction of second set - Lineation direction of first set
Angle between lineations = 80 - 35
Angle between lineations = 45°.
Therefore, the angle between the two sets of lineations is 45°.
Learn more about apparent dip
https://brainly.com/question/34068978
#SPJ11
Cobalt (Z = 27) has seven electrons in an incomplete d subshell.
(a) What are the values of n and ℓ for each electron?
n =
. ℓ =
(b) What are all possible values of mscripted ms and ms? mscripted ms = − _____ to + ____
ms = ± ______
c) What is the electron configuration in the ground state of cobalt? (Use the first space for entering the shorthand element of the filled inner shells, then use the remaining for the outer-shell electrons. Ex: for Manganese you would enter [Ar]3d54s2)
[ ] d s
Answers
Electron 1: n = 3, ℓ = 2 Electron 2: n = 3, ℓ = 2 Electron 3: n = 3, ℓ = 2
ms = -1, 0, +1 ms = ±1/2
The electron configuration of Cobalt is [Ar] 4s² 3d¹º.
a) The values of n and l for each electron are:
The number of subshells in a shell is equal to n.
The possible values of ℓ are from 0 to n − 1.
The d subshell has ℓ = 2.
We can use the fact that there are seven electrons to determine how they are distributed.Each d orbital can hold two electrons, and there are five d orbitals. As a result, there are three unpaired electrons. These unpaired electrons must be in separate orbitals, thus we should use the three empty d orbitals.
According to the Aufbau principle, the first electron goes into the lowest energy orbital, which is 3dxy, followed by 3dxz and 3dyz. As a result, the values of n and l for each electron are:
Electron 1: n = 3, ℓ = 2
Electron 2: n = 3, ℓ = 2
Electron 3: n = 3, ℓ = 2
b) The possible values of mscripted ms and ms are:
Each orbital can hold up to two electrons, which are designated as spin up (+½) and spin down (-½). As a result, there are two potential values of mscripted ms (+½ or -½) and two potential values of ms (+1/2 or -1/2). The three unpaired electrons must have three different values of mscripted ms, which is a whole number between -ℓ and ℓ, and can take on three possible values: +1, 0, and -1. There is only one orbital per mscripted ms value, thus we can use those values to identify which unpaired electron goes in which orbital.
mscripted ms = -1, 0, +1 ms = ±1/2 (the electrons in each orbital will have the same value of ms)
c) The electron configuration in the ground state of cobalt is:
To construct the electron configuration of Cobalt (Z = 27), we should write out the configuration of Argon (Z = 18), which is the nearest noble gas that represents the complete filling of the first and second energy levels. Following that, we can add the remaining electrons to the 3rd energy level. Since Cobalt (Z = 27) has 27 electrons, the configuration will have 27 electrons.
We can write the configuration as:
[Ar] 4s² 3d¹º (the number 10 denotes seven electrons in the incomplete d subshell)
Therefore, the electron configuration of Cobalt is [Ar] 4s² 3d¹º.
Learn more about electron configuration:
https://brainly.com/question/26084288
#SPJ11
notor exerts on the wheel. la) Maw lonq does the wheel take to reach its final operating speed of 1.270 revimin? ib) Throuch how many revotubloss does it tum while accelerating? rev
Answers
a) the time it takes the wheel to reach its final operating speed is `254s`. b) the wheel turns 4.04 revolutions while accelerating.
Given that a motor exerts on the wheel and it takes some time to reach its final operating speed and we need to determine the time it takes and the number of revolutions it turns while accelerating.
a) Time it takes to reach its final operating speed
The acceleration of the wheel is given by;`a = (v_f - v_i)/t`
Where;v_f = Final operating speed = 1270 rev/minv_i = Initial speed = 0rev/mint = time taken to reach its final operating speed
We are required to find t`t = (v_f - v_i)/a``t = (1270 - 0)/(5.0)`= `1270/5.0`=`254s`
Therefore, the time it takes the wheel to reach its final operating speed is `254s`.
b) The number of revolutions it turns while acceleratingThe angular acceleration of the wheel is given by;`a = alpha * r``alpha = a/r`Where;`a = 5.0[tex]rad/s^2` (Acceleration)`r[/tex] = 1.25 m` (Radius)
We need to find the number of revolutions it turns while accelerating. We will first find the final angular speed.`[tex]v_f^2 = v_i^2 + 2alpha * delta_theta``1270 = 0 + 2*5.0 * delta_theta`[/tex]
Where delta_theta is the angle rotated while accelerating.`delta_theta = 1270/(2*5.0)`=`127/5`=`25.4rad`
The number of revolutions it turns while accelerating is given by;
`Number of revolutions = angle/2*[tex]\pi[/tex]`=`25.4/(2*3.14)`= `4.04 rev`
Therefore, the wheel turns 4.04 revolutions while accelerating.
Learn more about speed here:
https://brainly.com/question/17661499
#SPJ11
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field. How close are the two charges?
Answers
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field.
Let the positive charge be q1=+1.100 μC and the negative charge be q2=-0.500 μC.
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field.
The net force on q1 due to the field is:
1=q1×E=+1.100×10⁻⁶C×9.00×10⁴ N/C=+99 N
The force between the charges is attractive and its magnitude is equal to the force experienced by q1 due to the uniform electric field:
2=99N
Then the distance between the charges is:
r=12/402= (1.100×10⁻⁶C)(-0.500×10⁻⁶C)/(4(8.85×10⁻¹²C²/N·m²)(99N))= 1.87×10⁻⁵m
Answer: 1.87×10⁻⁵m.
Learn more about electric field: https://brainly.com/question/19878202
#SPJ11
The sound from a guitar has a decibel level of 60 dB at your location, while the sound from a piano has a decibel level of 50 dB. What is the ratio of their intensities (guitar intensity / piano intensity)? A. In (6/5) B. 6/5 C. 10:1 D. 100:1 E. 1000:1
Answers
The guitar intensity is 10 times greater than the piano intensity and the ratio of sound intensity of guitar and piano is option C. 10:1
The ratio of guitar's sound intensity to piano's sound intensity can be determined using the following equation:
Ratio of intensities = (10^(dB difference/10))
For this situation, the difference in decibel levels is 60 dB - 50 dB = 10 dB.
Using the equation above, the ratio of intensities can be found
Ratio of intensities = (10^(10/10)) = 10
Therefore, the guitar intensity is 10 times greater than the piano intensity.
Thus option C. 10:1 is the correct answer.
Learn more about sound intensity https://brainly.com/question/14349601
#SPJ11
A machine is placed on member BC which has an unbalanced force of 500 kg which varies sinusoidally. Neglecting the mass of the machine, determine: (i) the maximum displacement when the unit"s speed is 150rpm; (ii) the speed of the machine at resonance; (iii) the displacement at resonance. Note: Take the following values: - EI=20×10 3
kNm 2
- M=20 tonnes: - Consider BC as infinitely rigid.
Answers
Hence, the maximum displacement is 10.57 m, the speed of the machine at resonance is 2.5 rad/s, and the displacement at resonance is approximately 7.5 m.
The equation of motion is given as below: EI(d2y/dx2) = (Mx - 500cos ωt)yLet's integrate both sides, we get EI(dy/dx) = (Mx2/2 - 500cos ωt y2/2)dxWe know EI(d2y/dx2) = (d/dx)[EI(dy/dx)] and also d/dx(x2y2) = y2 + 2xy(dy/dx) + x2(d2y/dx2)So, on integrating,
we get EI(dy/dx) = (Mx2/2 - 500cos ωt y2/2)dx is equal to EI(dy/dx) = (M/3 x3 - 500/ωcos ωt y2)x + C1where C1 is a constant of integration.Let the maximum displacement occurs at x = x1when the unit's speed is 150 rpm.
Therefore, the equation of motion can be written as EI(d2y/dx2) = (Mx1 - 500)ySo, the maximum displacement is given by ym = Mx1/500Since the speed of the machine at resonance is given by ωn = [√(M/ EI)]/2π, the speed of the machine is given by ωn = [√(20000/ 20 × 106)]/2π = 2.5 rad/sAt resonance, EI(d2y/dx2) = My, so EI(d2y/dt2) = -Mωn2y = -500y
Thus, the displacement at resonance is given by y = ym/√(1 - (f/ fn)2)where fn = (ωn/2π) = 0.398 Hzf = 150 rpm = 2.5 Hz Therefore, f/fn = 6.29 so that y = ym/√(1 - (6.29)2) = 0.707ym = 10.57 m, at resonance, the displacement is given by y = 0.707 × 10.57 = 7.47m, approximately 7.5 m.
Hence, the maximum displacement is 10.57 m, the speed of the machine at resonance is 2.5 rad/s, and the displacement at resonance is approximately 7.5 m.
to know more about resonance
https://brainly.com/question/11331041
#SPJ11
An object is placed a distance of 8.88f from a converging lens, where f is the lens's focal length. (Include the sign of the value in your answers.)
(a) What is the location of the image formed by the lens? dᵢ = __________ f
(b) Is the image real or virtual? O real O virtual (c) What is the magnification of the image? (d) Is the image upright or inverted? O upright O inverted
Answers
An object is placed a distance of 8.88f from a converging lens, where f is the lens's focal length.(a) The location of the image formed by the lens is at dᵢ = infinity (b) Since the image is formed at infinity, it is considered a virtual image.
(c) The magnification of the image can be determined using the magnification formula(d) The image is neither upright nor inverted. It is an "O real" image.
To solve this problem, we can use the lens formula:
1/f = 1/dₒ + 1/dᵢ
where:
f is the focal length of the lens, dₒ is the object distance, dᵢ is the image distance.Given that the object distance is 8.88f, we can substitute this value into the formula and solve for dᵢ.
(a) Calculating the image distance:
1/f = 1/dₒ + 1/dᵢ
1/f = 1/(8.88f) + 1/dᵢ
To simplify the equation, we can find a common denominator:
1/f = (1 + 8.88f) / (8.88f) = (1 + 8.88f) / (8.88f)
Now we can equate the numerators and solve for dᵢ:
1 = 1 + 8.88f
8.88f = 0
f = 0
Therefore, the image distance is at infinity, which means the image is formed at the focal point of the lens.
(a) The location of the image formed by the lens is at dᵢ = infinity.
(b) Since the image is formed at infinity, it is considered a virtual image.
(c) The magnification of the image can be determined using the magnification formula:
magnification (m) = -dᵢ / dₒ
Since dᵢ is infinity and dₒ is 8.88f, we can substitute these values into the formula:
magnification (m) = -∞ / (8.88f) = 0
Therefore, the magnification of the image is 0.
(d) Since the magnification is 0, the image is neither upright nor inverted. It is an "O real" image.
To learn more about focal length visit: https://brainly.com/question/1031772
#SPJ11
A solenoid of length L = 36.5 cm and radius R=2.3 cm , has turns density n = 10000 m⁻¹ (number of turns per meter). The solenoid carries a current I = 13.2 A. Calculate the magnitude of the magnetic field on the solenoid axis, at a distance t = 13.5 cm from one of the edges of the solenoid (inside the solenoid).
Answers
The magnitude of the magnetic field on the solenoid axis, at a distance t = 13.5 cm from one of the edges of the solenoid (inside the solenoid) is 1.84 × 10⁻⁴ T.
A solenoid is a long coil of wire that is tightly wound. The magnetic field in the interior of a solenoid is uniform and parallel to the axis of the coil. In the given problem, we are required to find out the magnitude of the magnetic field on the solenoid axis at a distance t=13.5 cm from one of the edges of the solenoid (inside the solenoid).
Length of the solenoid, L= 36.5 cm
Radius of the solenoid, R = 2.3 cm
Turns density, n = 10000 m-1
Current, I = 13.2 A
Let's use the formula to calculate the magnitude of the magnetic field on the solenoid axis inside it.
`B=(µ₀*n*I)/2 * [(R+ t) / √(R²+L²)]`
Where,
`B`= Magnetic field`
µ₀`= Permeability of free space= 4π×10⁻⁷ TmA⁻¹`
n`= Number of turns per unit length`
I`= Current`
R`= Radius
`t`= Distance from one of the edges of the solenoid`
L`= Length of the solenoid
Let's substitute the given parameters into the formula.
`B=(4π×10⁻⁷ *10000*13.2)/(2) * [(2.3+ 13.5) / √(2.3²+(36.5)²)]`
Solving the above equation gives us,
B = 1.84 × 10⁻⁴ T
Hence, the magnitude of the magnetic field on the solenoid axis, at a distance t = 13.5 cm from one of the edges of the solenoid (inside the solenoid) is 1.84 × 10⁻⁴ T.
Learn more about magnetic field:
https://brainly.com/question/13160823
#SPJ11