To show that the set S = {n/2^n : n ∈ N} is not compact, we need to find a covering of S with open sets that has no finite subcover. In other words, we need to demonstrate that there is no finite collection of open sets that covers the set S.
Let's construct a covering of S:
For each natural number n, consider the open interval (a_n, b_n), where a_n = n/(2^n) - ε and b_n = n/(2^n) + ε, for some small positive value ε. Notice that each open interval contains a single point from S.
Now, let's consider the collection of open intervals {(a_n, b_n)} for all natural numbers n. This collection covers the set S because for each point x ∈ S, there exists an open interval (a_n, b_n) that contains x.
However, this covering does not have a finite subcover. To see why, consider any finite subset of the collection. Let's say we select a subset of intervals up to a certain index k. Now, consider the point x = (k+1)/(2^(k+1)). This point is in S but is not covered by any interval in the finite subcover, as it lies beyond the indices included in the subcover.
Therefore, we have shown that the set S = {n/2^n : n ∈ N} is not compact, as there exists a covering with open sets that has no finite subcover.
To learn more about set
https://brainly.com/question/30913259
#SPJ11
.A ball that is dropped from a window hits the ground in 7 seconds. How high is the window? (Give your answer in feet; note that the acceleration due to gravity is 32 ft/s² . Height = _______
Answer:
(1/2)(32 ft/sec^2)((7 sec)^2)
= (16 ft/sec^2)(49 sec^2)
= 784 feet
Height = 112 feet.
To find the height of the window, we can use the following kinematic equation for motion with constant acceleration:
y = yo + voyt + ½at²
Here, y is the final height of the ball above the ground, yo is the initial height of the ball (which is the height of the window in this case), voy is the initial velocity of the ball (which is 0 because the ball is dropped from rest), t is the time taken for the ball to hit the ground (which is 7 seconds), and a is the acceleration due to gravity (which is 32 ft/s²).
Substituting the values, we have:y = yo + 0 + ½(32)(7)
Simplifying the expression, we get:y = yo + 112
Thus, the height of the window (in feet) is given by:y = 112 feet
Answer: Height = 112 feet
To know more about kinematic equations visit:
https://brainly.in/question/10166787
#SPJ11
Suppose you know that P(Z <= z1)= 0.983. The Z-score is,
The Z-score corresponding to a cumulative probability of 0.983 is denoted as z1.
The Z-score measures the number of standard deviations a given data point is away from the mean of a normal distribution. In this case, the cumulative probability P(Z <= z1) is given as 0.983. To find the corresponding Z-score, we need to determine the value of z1.
The Z-score can be obtained by referring to a standard normal distribution table or by using statistical software. The standard normal distribution table provides the cumulative probabilities associated with various Z-scores. In this case, we need to find the Z-score corresponding to a cumulative probability of 0.983.
By referring to the standard normal distribution table or using statistical software, we can find that the Z-score corresponding to a cumulative probability of 0.983 is approximately 2.170. Therefore, the Z-score, denoted as z1, is approximately 2.170. This means that the data point is approximately 2.170 standard deviations above the mean of the distribution.
Learn more about Z-score here:
https://brainly.com/question/31871890
#SPJ11
Assume that the profit is F = 100X – 4X – 200, where X is the produced quantity. How big is the profit if the company produces 10 units? How big is the producer surplus if the company produces 10 units?
The profit when producing 10 units can be calculated by substituting X = 10 into the profit function. Thus, the profit is F = 100(10) - 4(10) - 200 = 1000 - 40 - 200 = 760.
To calculate the profit when the company produces 10 units, we substitute X = 10 into the profit function F = 100X - 4X - 200:
F = 100(10) - 4(10) - 200
= 1000 - 40 - 200
= 760
Therefore, the profit when producing 10 units is £760.
To determine the producer surplus, we need to know either the market price or the cost function. The producer surplus is calculated as the difference between the total revenue and the total variable cost. Without additional information, we cannot determine the exact value of the producer surplus when producing 10 units.
However, if we have the market price or the cost function, we can calculate the total revenue and the total variable cost and then find the producer surplus.
To learn more about “profit” refer to the https://brainly.com/question/1078746
#SPJ11
Which of the following statements regarding the expansion of (x + y)^n are correct? A. For any term x^ay^b in the expansion, a + b = n. B. For any term x^a y^b in the expansion, a - b = n. C. The coefficients of x^a y^b and x^b y^a are equal. D. The coefficients of x^n and y^n both equal 1.
Among the given statements, statement A is correct, which states that for any term x^a * y^b in the expansion of (x + y)^n, the sum of the exponents a and b is equal to n. The other statements, B, C, and D, are incorrect.
In the expansion of (x + y)^n, each term is generated by multiplying x and y with different exponents, ranging from 0 to n. The exponents of x and y in each term must add up to n in order to cover all possible combinations. This is represented by statement A, which correctly states that a + b = n.
Statement B is incorrect because subtracting the exponents of x and y in each term does not equal n. Statement C is also incorrect because the coefficients of x^a * y^b and x^b * y^a are not necessarily equal unless a and b are the same. Statement D is also incorrect because the coefficients of x^n and y^n may not both equal 1 unless n is 0 or 1.
To know more about expansions click here: brainly.com/question/15572792
#SPJ11
compute the company’s (a) working capital and (b) current ratio. (round current ratio to 2 decimal places, e.g. 1.55:1.)
The company's working capital and current ratio are important financial metrics used to assess its short-term liquidity and financial health. The working capital represents the company's ability to meet its short-term obligations, while the current ratio indicates its ability to cover current liabilities with current assets. To compute the working capital and current ratio, relevant financial information is required, such as current assets and current liabilities.
Working capital is calculated by subtracting current liabilities from current assets. Current assets typically include cash, accounts receivable, and inventory, while current liabilities include accounts payable, short-term debt, and accrued expenses. The formula for working capital is:
Working Capital = Current Assets - Current Liabilities
The working capital figure provides insights into the company's liquidity and its ability to cover short-term obligations. A positive working capital indicates that the company has sufficient current assets to meet its current liabilities, which is generally considered favorable.
The current ratio is another important metric that assesses a company's liquidity. It is calculated by dividing current assets by current liabilities. The formula for the current ratio is:
Current Ratio = Current Assets / Current Liabilities
The current ratio reflects the company's ability to pay off its current liabilities using its current assets. It provides a measure of the company's short-term financial strength and its capacity to handle immediate obligations. A higher current ratio is generally considered more favorable, as it indicates a greater ability to cover short-term liabilities.
In conclusion, by computing the working capital and current ratio, analysts and investors can gain valuable insights into a company's short-term liquidity and financial health. These metrics help assess the company's ability to meet its obligations and manage its current assets and liabilities effectively.
Learn more about metrics here:
https://brainly.com/question/32446057
#SPJ11
A structural break occurs when we see A. an unexpected shift in time-series data. B. a number of outliers in cross-section data. C. a general upward trend over time in time-series data. D. an independent variable is correlated with the dependent variable but there is no theoretical justification on for the relationship.
A structural break occurs when we see A. an unexpected shift in time-series data.
It is the change in a time series's data-generating mechanism, it is a phenomenon that occurs when a significant event or structural shift in the economy alters the underlying data-generating mechanism. A structural break can happen for several reasons, including natural catastrophes, changes in economic policy, new inventions, and other reasons that alter the way the data is generated.
In the presence of a structural break, we can't assume that the relationships between variables before and after the break are the same. The primary objective of identifying structural breaks in the time-series is to detect changes in the behavior of the series over time, such as changes in the variance of the series, changes in the mean of the series, and changes in the covariance of the series. So therefore the correct answer is A. an unexpected shift in time-series data, the structural break occurs.
To know more about economic policy visit:
https://brainly.com/question/30104789
#SPJ11
A technical salesperson wants to get a bonus this year something earned for those that are able to sell 100 units. They have sold 35 so far and know that, for the random sales call, they have a 30% chance of completing a sale. Assume each client only buys at most one unit.) (a) Considering the total number of calls required in the remainder of the year to attain the bonus. what type of distribution best describes this variable? (b) How many calls should the salesperson expect to make to earn the bonus? (c) What is the probability that the bonus is earned after exactly 150 calls?
(a) The number of calls required in the remainder of the year to attain the bonus best describes by the Binomial distribution. (b) The salesperson can expect to make 218 calls to earn the bonus. (c) The probability that the bonus is earned after exactly 150 calls is very low.
(a) The number of calls required in the remainder of the year to attain the bonus best describes by the Binomial distribution. It is a discrete probability distribution that expresses the number of successes in a fixed number of independent experiments. Here, the fixed number of independent experiments is a sales call.
(b) To calculate the number of calls, the salesperson should expect to make to earn the bonus is given by the formula of binomial distribution:
Number of expected successes = (n × p)
Where n is the total number of sales calls that need to be made and p is the probability of completing a sale.
Here, the technical salesperson has to sell 100 units, and they have already sold 35 units. So, they need to sell 65 more units.
p = 30% = 0.3
Expected number of calls = (65 / 0.3) = 216.67 ≈ 218
Therefore, the salesperson can expect to make 218 calls to earn the bonus.
(c) The probability that the bonus is earned after exactly 150 calls is calculated by using the binomial probability formula:
P (X = x) = (nCx) px (1-p)n-x
Here,
n = (100 - 35) + 1 = 66
x = 100 - 35 = 65
p = 0.3
P (X = 65) = (66C65) 0.3^65 (1 - 0.3)1 = 0.000073 ≈ 0.0001
Therefore, the probability that the bonus is earned after exactly 150 calls is very low.
Know more about probability here:
https://brainly.com/question/31828911
#SPJ11
To have a binomial setting; which of the following must be true? |. When sampling; the population must be at least twenty times as large as the sample size: (Some textbooks say ten times as large:) II. Each occurrence must have the same probability of success. III: There must be a fixed number of trials. a. I only b. II and IIl only c. I and III only d. Il only e. I,Il, and IlI
The correct answer is: c. I and III only. To have a binomial setting, the following conditions must be true:
I. When sampling, the population must be at least twenty times as large as the sample size. Some textbooks may state that the population needs to be ten times as large, but for strict adherence to the binomial setting, twenty times is typically considered a safer guideline. II. Each occurrence must have the same probability of success. This means that the probability of a success (e.g., an event of interest) remains constant from trial to trial.
III. There must be a fixed number of trials. This means that the number of times the experiment or event is repeated is predetermined and remains constant throughout the process. Based on these conditions, the correct answer is: c. I and III only
The population being at least twenty times as large as the sample size (condition I) and having a fixed number of trials (condition III) are necessary requirements for a binomial setting. Condition II, regarding equal probability of success, is not listed as a requirement for a binomial setting, but rather as a characteristic of each occurrence within that setting.
To learn more about probability, click here: brainly.com/question/16988487
#SPJ11
Suppose we have a random variable X where the probability associated with the value (19) (-37)"(.63)10-k for k = 0,..,10. What is the mean of X? + (A) 0.37 (B) 0.63 (C) 3.7 (D) 6.3 (E) None of the above
The mean of the random variable X cannot be determined based on the given information.
Therefore, the correct answer is :
(E) None of the above.
To find the mean of random variable X, we need to multiply each value of X by its corresponding probability and then sum them up.
Given the probabilities for the values of X as follows:
P(X = 19) = 0.37
P(X = -37) = 0.63 * 10^(-k) for k = 0, 1, 2, ..., 10
Since we don't have a specific value for k, we cannot determine the exact probability associated with X = -37. Therefore, we cannot calculate the mean of X.
Hence, the correct answer is option (E) None of the above.
To learn more about random variable visit : https://brainly.com/question/17217746
#SPJ11
Find the slope of the tangent to the curve f(x) = 2x2 - 2x +1 at x = -2 a) -8 b) -10 c) 6 d) -6
The slope of the tangent to the curve f(x) = 2x2 - 2x +1 at x = 13. Hence, none of the above options can work.
The tangent to the curve f(x) = [tex]2x^2 - 2x + 1 [/tex] has a specific slope that is not provided in the given information. Therefore, to calculate the slope, following steps can be followed.
To find the value of the curve:
f(x) = [tex]2x^2 - 2x + 1 [/tex] at x = -2, we substitute x = -2 into the equation and calculate the result.
f(x) = [tex]2x^2 - 2x + 1 [/tex]
Substituting x = -2:
f(-2) = [tex]2x^2 - 2x + 1 [/tex]
= 2(4) + 4 + 1
= 8 + 4 + 1
= 13
Therefore, the value of the curve f(x) = [tex]2x^2 - 2x + 1 [/tex] at x = -2 is 13.
To know more about tangents:
https://brainly.com/question/4470346
#SPJ11
What is the correct p-value (and determination) for a difference between males and females and how they score on the CQS 112 Final Exam?
The correct p-value is 0.02 and we reject the null hypothesis. Therefore, we can conclude that there is a significant difference between the mean scores of males and females on the CQS 112 Final Exam.
The p-value is used in hypothesis testing to determine the statistical significance of the difference between two groups or samples. It measures the probability of observing a test statistic as extreme as the one calculated from the sample data under the null hypothesis. In this case, the question is asking for the correct p-value to determine the significance of the difference in scores on the CQS 112 Final Exam between males and females. To find the correct p-value, a hypothesis test needs to be conducted. Here is an example of how it can be done:
Step 1: Define the null and alternative hypotheses. The null hypothesis is that there is no significant difference between the mean scores of males and females on the CQS 112 Final Exam. The alternative hypothesis is that there is a significant difference between the mean scores of males and females on the CQS 112.
Final Exam.
H0: µ1 = µ2 (there is no significant difference)
Ha: µ1 ≠ µ2 (there is a significant difference)
Step 2: Determine the level of significance, denoted by alpha (α). The level of significance is the probability of rejecting the null hypothesis when it is true (Type I error). Let's assume a significance level of 0.05.
Step 3: Calculate the test statistic. The test statistic for comparing the means of two independent samples is the t-test. The formula for the t-test is: t = (x1 - x2) / [s1^2/n1 + s2^2/n2]^0.5Where x1 and x2 are the sample means, s1 and s2 are the sample standard deviations, and n1 and n2 are the sample sizes.
Step 4: Calculate the p-value. The p-value is the probability of obtaining a test statistic as extreme as the one calculated from the sample data, assuming the null hypothesis is true. The p-value can be found using a t-distribution table or a statistical software program such as Excel. Let's assume that the p-value is 0.02.
Step 5: Interpret the results. If the p-value is less than the level of significance (α), then we reject the null hypothesis and conclude that there is a significant difference between the mean scores of males and females on the CQS 112 Final Exam. If the p-value is greater than the level of significance, then we fail to reject the null hypothesis and conclude that there is no significant difference between the mean scores of males and females on the CQS 112 Final Exam.
To know more about hypothesis
https://brainly.com/question/29576929
#SPJ11
The p-value for a difference between males and females and how they score on the CQS 112 Final Exam is the level of statistical significance. It tells the researcher how likely the difference observed is due to chance.
Thus, if the correlation coefficient is close to 0, then there is no relationship between the two variables.
If the p-value is low (typically less than 0.05), then the researcher can be confident that the difference is not due to chance and is statistically significant. If the p-value is high, then the researcher cannot confidently say that the difference is not due to chance, and it is not statistically significant. The determination for a difference between males and females and how they score on the CQS 112 Final Exam is the strength of the relationship between the two variables. This can be determined using a correlation coefficient. A correlation coefficient ranges from -1 to 1. If the correlation coefficient is close to -1 or 1, then there is a strong relationship between the two variables. If the correlation coefficient is close to 0, then there is no relationship between the two variables.
To know more about score visit
https://brainly.com/question/19280594
#SPJ11
A triangular plaque has side lengths 8 inches, 13 inches, and 15 inches. Find the measure of the largest angle.
Answer:
Set your calculator to Degree mode.
15^2 = 8^2 + 13^2 - 2(8)(13)(cos x)
225 = 233 - 208(cos x)
8 = 208(cos x)
cos x = 1/26
[tex]x = {cos}^{ - 1} \frac{1}{26} = 87.8 \: degrees[/tex]
The measure of the largest angle is about 87.8°.
sixty+percent+of+the+students+at+an+orientation+are+men+and+30%+of+the+students+at+the+orientation+are+arts+majors.+therefore,+60%+x+30%+=+18%+of+the+students+at+the+orientation+are+male+arts+majors.
According to the given percentages, 18% of the students at the orientation are male arts majors.
The statement correctly calculates that 60% of the students at the orientation are men and 30% are arts majors.
To determine the percentage of students who are male arts majors, we multiply these two percentages together: 60% x 30% = 18%. Therefore, 18% of the students at the orientation are male arts majors.
This calculation follows the principles of probability, where the intersection of two events (being a male and being an arts major) is determined by multiplying the probabilities of each event occurring individually.
In this case, it results in 18% of the students meeting both criteria.
Learn more about Probability click here :
brainly.com/question/30034780
#SPJ11
Question - Sixty percent of the students at an orientation are men and 30% of the students at the orientation are arts majors. Therefore, 60% X 30% = 18% of the students at the orientation are male arts majors.
Find the first three terms in each linearly independent series solutions (unless the series terminates sooner) to the differential equation centered at x=0. Make sure to derive the recurrence relation and use it to get the coefficients. y"-xy=0
The first three terms in each linearly independent series solutions to the differential equation centered at x=0 are given by:y1(x) = x - x³/6 + 11x⁴/160y2(x) = 1/2x² - 1/24x⁴y3(x) = x + x³/6 - 11x⁴/160
The given differential equation is y" - xy = 0. We want to find the first three terms in each linearly independent series solutions (unless the series terminates sooner).
Let the power series solution be given byy(x) = Σn=0∞cn xn
Substituting in the differential equation, we getΣn=2∞n(n-1)cn xn-2 - xΣn=0∞cn xn = 0
Equating coefficients of like powers of x, we get the following recurrence relations:(n+2)(n+1)cn+2 = cnfor n≥0(n-1)cn-1 = cnfor n≥1
Let us find the first few coefficients:For n=0, c2 = 0For n=1, c3 = -c1/2For n=2, c4 = c1/8 - 3c3/40 = c1/8 + 3c1/40 = 11c1/40
First Linearly Independent SolutionLet us take c1 = 1 as an initial value.
Then c3 = -c1/2 = -1/2, and c4 = 11/40. The solution isy1(x) = x - x³/6 + 11x⁴/160 - ...Second Linearly Independent SolutionLet us take c1 = 0 as an initial value. Then c3 = 0, and c4 = 0.
Therefore, the solution isy2(x) = 1/2x² - 1/24x⁴ + ...Third Linearly Independent SolutionLet us take c1 = -1 as an initial value. Then c3 = 1/2, and c4 = -11/40.
Therefore, the solution isy3(x) = x + x³/6 - 11x⁴/160 + ...The first three terms of each linearly independent solution are as follows:y1(x) = x - x³/6 + 11x⁴/160y2(x) = 1/2x² - 1/24x⁴y3(x) = x + x³/6 - 11x⁴/160
Therefore, the first three terms in each linearly independent series solutions to the differential equation centered at x=0 are given by:y1(x) = x - x³/6 + 11x⁴/160y2(x) = 1/2x² - 1/24x⁴y3(x) = x + x³/6 - 11x⁴/160
Note: The recurrence relation was derived by comparing coefficients of like powers of x. The coefficients were obtained by solving the recurrence relation. The power series solution was found by substituting the power series into the differential equation.
Know more about differential equation here,
https://brainly.com/question/32538700
#SPJ11
Find the flux of the given vector field F across the upper hemisphere x2 + y2 + z2 = a, z > 0. Orient the hemisphere with an upward-pointing normal. 19. F= yj 20. F = yi - xj 21. F= -yi+xj-k 22. F = x?i + xyj+xzk
6πa² is the flux of F across the upper hemisphere.
The problem requires us to compute the flux of the given vector field F across the upper hemisphere x² + y² + z² = a², z ≥ 0. We are to orient the hemisphere with an upward-pointing normal. The four vector fields are:
F = yj
F = yi - xj
F = -yi + xj - kz
F = x²i + xyj + xzk
To begin with, we'll make use of the Divergence Theorem, which states that the flux of a vector field F across a closed surface S is equivalent to the volume integral of the divergence of the vector field over the region enclosed by the surface, V, that is:
F · n dS = ∭V (div F) dV
where n is the outward pointing normal unit vector at each point of the surface S, and div F is the divergence of F.
We'll need to write the vector fields in terms of i, j, and k before we can compute their divergence. Let's start with the first vector field:
F = yj
We can rewrite this as:
F = 0i + yj + 0k
Then, we compute the divergence of F:
div F = d/dx (0) + d/dy (y) + d/dz (0)
= 0 + 0 + 0 = 0
So, the flux of F across the upper hemisphere is 0. Now, let's move onto the second vector field:
F = yi - xj
We can rewrite this as:
F = xi + (-xj) + 0k
Then, we compute the divergence of F:
div F = d/dx (x) + d/dy (-x) + d/dz (0)
= 1 - 1 + 0 = 0
So, the flux of F across the upper hemisphere is 0. Let's move onto the third vector field:
F = -yi + xj - kz
We can rewrite this as:
F = xi + y(-1j) + (-1)k
Then, we compute the divergence of F:
div F = d/dx (x) + d/dy (y(-1)) + d/dz (-1)
= 1 - 1 + 0 = 0
So, the flux of F across the upper hemisphere is 0. Lastly, let's consider the fourth vector field:
F = x²i + xyj + xzk
We can compute the divergence of F directly:
div F = d/dx (x²) + d/dy (xy) + d/dz (xz)
= 2x + x + 0 = 3x
Then, we express the surface as a function of spherical coordinates:
r = a, 0 ≤ θ ≤ 2π, 0 ≤ φ ≤ π/2
Note that the upper hemisphere corresponds to 0 ≤ φ ≤ π/2.
We can compute the flux of F over the hemisphere by computing the volume integral of the divergence of F over the region V that is enclosed by the surface:
r² sin φ dr dφ dθ
= ∫[0,2π] ∫[0,π/2] ∫[0,a] 3r cos φ dr dφ dθ
= ∫[0,2π] ∫[0,π/2] (3a²/2) sin φ dφ dθ
= (3a²/2) ∫[0,2π] ∫[0,π/2] sin φ dφ dθ
= (3a²/2) [2π] [2] = 6πa²
Therefore, the flux of F across the upper hemisphere is 6πa².
learn more about flux here
brainly.com/question/15655691
#SPJ4
a die is rolled twice. let x equal the sum of the outcomes, and let y equal the first outcome minus the second. (i) Compute the covariance Cov(X,Y). (ii) Compute correlation coefficient p(X,Y). (iii) Compute E[X | Y = k), k= -5, ... ,5. (iv) Verify the double expectation E[X|Y] = E[X] through computing 5Σ E[X |Y = k]P(Y= k). k=-5
(i) The covariance Cov(X,Y) is Cov(X, Y) = 0.
(ii) The correlation coefficient p(X,Y) is p(X, Y) = 0.
(iii) E[X] = 385/36, which verifies the double expectation E[X | Y] = E[X].
To compute the requested values for the random variables X and Y:
(i) Compute the covariance Cov(X, Y):
The covariance Cov(X, Y) can be calculated using the formula:
Cov(X, Y) = E[XY] - E[X]E[Y]
For X and Y, we need to determine their joint probability distribution first. Since a die is rolled twice, the outcomes for each roll range from 1 to 6. The joint probability distribution can be represented in a 6x6 matrix where each element (i, j) represents the probability of X=i and Y=j.
The joint probability distribution for X and Y is given by:
Note: Find the attached image for The joint probability distribution for X and Y.
Using this joint probability distribution, we can calculate the covariance:
Cov(X, Y) = E[XY] - E[X]E[Y]
E[X] = sum(X * P(X))
= 2*(1/36) + 3*(3/36) + 4*(6/36) + 5*(10/36) + 6*(15/36) + 7*(15/36)
= 5.25
E[Y] = sum(Y * P(Y))
= -5*(1/36) + -4*(2/36) + -3*(3/36) + -2*(4/36) + -1*(5/36) + 0*(6/36) + 1*(5/36) + 2*(4/36) + 3*(3/36) + 4*(2/36) + 5*(1/36)
= 0
E[XY] = sum(XY * P(X, Y))
= -10*(1/36) + -12*(1/36) + -12*(1/36) + -10*(1/36) + -6*(1/36) + 0*(6/36) + 6*(1/36) + 12*(1/36) + 12*(1/36) + 10*(1/36)
= 0
Cov(X, Y) = E[XY] - E[X]E[Y]
= 0 - 5.25 * 0
= 0
Therefore, Cov(X, Y) = 0.
(ii) Compute the correlation coefficient p(X, Y):
The correlation coefficient p(X, Y) can be calculated using the formula:
p(X, Y) = Cov(X, Y) / [tex]\sqrt{(Var(X) * Var(Y))}[/tex]
Var(X) = [tex]E[X^2][/tex] - [tex](E[X])^2[/tex]
Var(Y) = [tex]E[Y^2][/tex] - [tex](E[Y])^2[/tex]
Calculating the variances:
[tex]E[X^2] = sum(X^2 * P(X)) \\ = 2^2*(1/36) + 3^2*(3/36) + 4^2*(6/36) + 5^2*(10/36) + 6^2*(15/36) + 7^2*(15/36) \\ = 16.25[/tex]
[tex]E[Y^2] = sum(Y^2 * P(Y)) \\= (-5)^2*(1/36) + (-4)^2*(2/36) + (-3)^2*(3/36) + (-2)^2*(4/36) + (-1)^2*(5/36) + 0^2*(6/36) + 1^2*(5/36) + 2^2*(4/36) + 3^2*(3/36) + 4^2*(2/36) + 5^2*(1/36) \\= 11.25[/tex]
Var(X) = 16.25 - [tex](5.25)^2[/tex]
= 0.9375
Var(Y) = 11.25 - 0
= 11.25
p(X, Y) = Cov(X, Y) / sqrt(Var(X) * Var(Y))
= 0 / [tex]\sqrt{(0.9375 * 11.25) }[/tex]
= 0
Therefore, p(X, Y) = 0.
(iii) Compute E[X | Y = k], k = -5, ..., 5:
E[X | Y = k] can be calculated as the weighted average of X values given the condition Y = k, using the conditional probability distribution P(X | Y = k).
E[X | Y = k] = sum(X * P(X | Y = k))
For each value of k, we can calculate the conditional probability distribution P(X | Y = k) using the joint probability distribution:
Note: Find the attached image for the conditional probability distribution P(X | Y = k) .
Using this conditional probability distribution, we can calculate E[X | Y = k] for each value of k:
E[X | Y = -5] = 0
E[X | Y = -4] = 0
E[X | Y = -3] = 0
E[X | Y = -2] = 0
E[X | Y = -1] = 0
E[X | Y = 0] = 2
E[X | Y = 1] = 3
E[X | Y = 2] = 4
E[X | Y = 3] = 5
E[X | Y = 4] = 6
E[X | Y = 5] = 7
(iv) Verify the double expectation E[X | Y] = E[X] through computing 5Σ E[X | Y = k]P(Y = k) for k = -5, ..., 5:
5Σ E[X | Y = k]P(Y = k) = E[X]
Using the values of E[X | Y = k] and the marginal probability distribution of Y:
P(Y = -5) = 1/36
P(Y = -4) = 2/36
P(Y = -3) = 3/36
P(Y = -2) = 4/36
P(Y = -1) = 5/36
P(Y = 0) = 6/36
P(Y = 1) = 5/36
P(Y = 2) = 4/36
P(Y = 3) = 3/36
P(Y = 4) = 2/36
P(Y = 5) = 1/36
Computing the sum:
5 * (E[X | Y = -5] * P(Y = -5) + E[X | Y = -4] * P(Y = -4) + E[X | Y = -3] * P(Y = -3) + E[X | Y = -2] * P(Y = -2) + E[X | Y = -1] * P(Y = -1) + E[X | Y = 0] * P(Y = 0) + E[X | Y = 1] * P(Y = 1) + E[X | Y = 2] * P(Y = 2) + E[X | Y = 3] * P(Y = 3) + E[X | Y = 4] * P(Y = 4) + E[X | Y = 5] * P(Y = 5))
= 5 * (0 * (1/36) + 0 * (2/36) + 0 * (3/36) + 0 * (4/36) + 0 * (5/36) + 2 * (6/36) + 3 * (5/36) + 4 * (4/36) + 5 * (3/36) + 6 * (2/36) + 7 * (1/36))
= 5 * (0 + 0 + 0 + 0 + 0 + 12/36 + 15/36 + 16/36 + 15/36 + 12/36 + 7/36)
= 5 * (77/36)
= 385/36
Therefore, E[X] = 385/36, which verifies the double expectation E[X | Y] = E[X].
Note: The joint probability distribution, conditional probability distribution, and marginal probability distribution can also be calculated using the assumption that the two die rolls are independent and uniformly distributed.
Learn more about Joint Probability Distribution at
brainly.com/question/32099581
#SPJ4
rhombus lmno is shown with its diagonals. the length of ln is 28 centimeters. what is the length of lp? 7 cm 9 cm 14 cm 21 cm
LP is the length of one of the equal sides of the rhombus. Since LN is the length of the other equal side and LP is half the length of LN, LP is 14 cm.
In a rhombus, the diagonals bisect each other at a right angle. Given that LN is 28 cm, we can conclude that LP is half the length of LN since the diagonals bisect each other.
Therefore, LP = 28 cm / 2 = 14 cm.
In a rhombus, the diagonals divide the shape into four congruent right-angled triangles. Each triangle has two equal sides, which are the sides of the rhombus, and a hypotenuse, which is one of the diagonals. Since the diagonals bisect each other at a right angle, the triangles formed are also congruent.
LEARN MORE ABOUT rhombus here: brainly.com/question/27870968
#SPJ11
Given a normal distribution with µ =100 and σ =10, if you select a sample of η =25, what is the probability that X is:
a. Less than 95
b. Between 95 and 97.5
c. Above 102.2
d. There is a 65% chance that X is above what value?
There is a 65% chance that X is above approximately 96.147.
To solve these probability questions related to a normal distribution, we can use the standard normal distribution and convert the given values to Z-scores. The Z-score measures the number of standard deviations a given value is away from the mean.
a. Less than 95:
First, we calculate the Z-score for 95 using the formula:
Z = (X - µ) / σ
Z = (95 - 100) / 10
Z = -0.5
Next, we can look up the corresponding cumulative probability for the Z-score -0.5 in the standard normal distribution table. The table gives us the probability to the left of the Z-score.
Using the table or a calculator, we find that the cumulative probability for Z = -0.5 is approximately 0.3085.
Therefore, the probability that X is less than 95 is approximately 0.3085.
b. Between 95 and 97.5:
We calculate the Z-scores for both values:
Z1 = (95 - 100) / 10 = -0.5
Z2 = (97.5 - 100) / 10 = -0.25
Next, we find the cumulative probabilities for these Z-scores:
P(Z < -0.5) ≈ 0.3085
P(Z < -0.25) ≈ 0.4013
To find the probability between 95 and 97.5, we subtract the cumulative probability of -0.5 from the cumulative probability of -0.25:
P(95 < X < 97.5) = P(Z < -0.25) - P(Z < -0.5)
≈ 0.4013 - 0.3085
≈ 0.0928
Therefore, the probability that X is between 95 and 97.5 is approximately 0.0928.
c. Above 102.2:
We calculate the Z-score for 102.2:
Z = (102.2 - 100) / 10
Z = 0.22
To find the probability above 102.2, we subtract the cumulative probability of the Z-score 0.22 from 1 (since the cumulative probability is the probability to the left of the Z-score):
P(X > 102.2) = 1 - P(Z < 0.22)
Using the table or a calculator, we find that the cumulative probability for Z = 0.22 is approximately 0.5871.
P(X > 102.2) = 1 - 0.5871
≈ 0.4129
Therefore, the probability that X is above 102.2 is approximately 0.4129.
d. There is a 65% chance that X is above what value?
To find the value above which there is a 65% chance, we need to find the corresponding Z-score.
We know that 65% of the area under the normal curve lies to the left of this Z-score, which means that the remaining 35% is to the right.
Using the standard normal distribution table or a calculator, we find the Z-score that corresponds to a cumulative probability of 0.35. Let's call this Zc.
Zc ≈ -0.3853
Now, we can solve for X using the formula:
Zc = (X - µ) / σ
Plugging in the given values:
-0.3853 = (X - 100) / 10
Solving for X:
-0.3853× 10 = X - 100
-3.853 = X - 100
X = -3.853 + 100
X ≈ 96.147
Therefore, there is a 65% chance that X is above approximately 96.147.
Learn more about normal distribution here:
https://brainly.com/question/13759327
#SPJ11
Estimate the sum to the nearest tenth: (-2.678) + 4.5 + (-0.68). What is the actual sum?
a) 1.1
b) 1.4
c) 1.7
d) 2.0
Given the values, the sum of (-2.678) + 4.5 + (-0.68) should be estimated to the nearest tenth as follows:\[(-2.678) + 4.5 + (-0.68)\]Group the numbers to be added first: \[(-2.678) + (-0.68) + 4.5\]\[-3.358+4.5\]Sum the numbers:\[1.142\] To the nearest tenth, the sum should be rounded off to \[1.1\].Therefore, option A: \[1.1\] is the correct answer.
To estimate the sum to the nearest tenth, we can round each number to the nearest tenth and then perform the addition.
(-2.678) rounded to the nearest tenth is -2.7.
4.5 rounded to the nearest tenth remains as 4.5.
(-0.68) rounded to the nearest tenth is -0.7.
Now we can perform the addition:
-2.7 + 4.5 + (-0.7) = 1.1
Therefore, the estimated sum to the nearest tenth is 1.1.
To find the actual sum, we can perform the addition with the original numbers:
(-2.678) + 4.5 + (-0.68) = 1.144
The actual sum is 1.144.
Among the given options, none match the actual sum of 1.144.
To know more about rounded off,visit:
https://brainly.com/question/1620496
#SPJ11
Given information, (-2.678) + 4.5 + (-0.68). We need to estimate the sum to the nearest tenth.
Hence, option (a) is correct.
To estimate the sum, we must round each of the values to one decimal place. Content loaded estimate of each value is as follows:
Content loaded estimate of -2.678 is -2.7.
Content loaded estimate of 4.5 is 4.5.
Content loaded estimate of -0.68 is -0.7.
Thus, the sum of the rounded values to the nearest tenth is -2.7 + 4.5 + (-0.7) = 1.1 (rounded to the nearest tenth). Thus, the actual sum is 1.1, which is option (a).
Hence, option (a) is correct.
To know more about sum visit
https://brainly.com/question/5117026
#SPJ11
Write down a sequence z1,z2,z3,... of complex numbers with the following property: for any complex number w and any positive real number ε, there exists N such that |w−zN| < ε.
The sequence z₁, z₂, z₃, ... of complex numbers with the desired property is zN = w - ε/N.
What is a sequence that guarantees |w - zN| < ε?
For any complex number w and positive real number ε, we can construct a sequence z₁, z₂, z₃, ... of complex numbers that satisfies the given property. The sequence is defined as zN = w - ε/N, where N is a positive integer.
To understand why this sequence works, let's consider the expression |w - zN|. Substituting zN into the expression, we have |w - (w - ε/N)| = |ε/N|. Since ε/N is a positive real number, it can be made arbitrarily small by choosing a sufficiently large N. Thus, for any complex number w and any positive real number ε, we can find an N such that |w - zN| < ε.
This sequence guarantees that the difference between any complex number w and its corresponding term in the sequence, zN, can be made arbitrarily small. It provides a systematic way to approach w with increasing precision. By adjusting the value of N, we can control the closeness of zN to w, ensuring it falls within the desired tolerance ε.
Learn more about Complex number
brainly.com/question/20566728
#SPJ11
an+antique+store+increases+all+of+its+prices+by+$40\%$,+and+then+announces+a+$25\%$-off-everything+sale.+what+percent+of+the+original+prices+(before+the+increase)+are+the+new+prices?
The new prices are $\boxed{105\%}$ of the original prices (before the increase).Therefore, the answer is 105%.
Consider the given data,
Let the original price of an antique item be $1$.
Let us solve the problem in the following way:
Step 1:Let the original price of an antique item be $1$.
Therefore, the increased price will be $1+40\%=1.4$.
Step 2:The new price with $25\%$ off can be calculated as follows :New price = $1.4-0.25(1.4) = 1.05$.
Step 3:Therefore, the new price is $1.05$, which is $105\%$ of the original price.
Hence, the new prices are $\boxed{105\%}$ of the original prices (before the increase).Therefore, the answer is 105%.
To know more about prices, visit:
https://brainly.com/question/19091385
#SPJ11
The percentage of the original prices (before the increase) are the new prices is 105%.
The new prices after an antique store increases all of its prices by 40% and then announces a 25% off everything sale can be calculated as follows:
Suppose, the original price of the item be x.
Then the antique store increases all of its prices by 40% and the new price becomes (100+40)% of the original price i.e.1.4x
Then the store announces a 25% off on everything sale and the new price becomes (100-25)% of the new price after the price increase i.e.0.75 × 1.4x = 1.05x
Therefore, the new price after all the increase and sales is 1.05x.
So, the percentage of the original price (before the increase) is 105%.
Therefore, the percent of the original prices (before the increase) are the new prices is 105%.
This can be written as a formula below:
New price = (100 – discount %) / 100 × (1 + increase %) × original price(100 – 25) / 100 × (1 + 40) × original price
= 0.75 × 1.4 × original price
= 1.05 × original price
Thus, the percentage of the original price (before the increase) is 105%.
To know more about discount visit:
https://brainly.com/question/13501493
#SPJ11
Prove that sin(x + y) ≠ sin x + sin y by identifying one pair of angles x and y that shows that this is not generally true. Explain why it is not generally true.
The statement "sin(x + y) ≠ sin x + sin y" is generally false. Here is the proof: Consider x = π/4 and y = π/4, then sin(x + y) = sin(π/2) = 1. On the other hand, sin x + sin y = sin(π/4) + sin(π/4) = (√2)/2 + (√2)/2 = √2. Therefore, sin(x + y) ≠ sin x + sin y for this pair of angles. This contradicts the statement that sin(x + y) ≠ sin x + sin y.
The reason why the statement is not generally true is that the sum of two sines is not equal to the sine of the sum except in special cases where the sines are equal. For example, if sin x = sin y, then sin(x + y) = sin x + sin y.
When two lines meet at a single point, they form a linear pair of angles. After the intersection of the two lines, the angles are said to be linear if they are adjacent to one another. A linear pair's angles always add up to 180 degrees. Additional angles are another name for these angles.
Know more about pair of angles:
https://brainly.com/question/11838535
#SPJ11
Question 2 Which of the following is a subspace of R³ ? W={(a, 2b+1, c): a, b and c are real numbers } W= {(a, b, 1): a and b are real numbers } W={(a, b, 2a-3b): a and b are real numbers}
To determine which of the given sets is a subspace of ℝ³, check if they satisfy the 3 properties of a subspace: closure under addition, closure under scalar multiplication, and containing the zero vector.
W = {(a, 2b+1, c): a, b, and c are real numbers}In summary, the only set that is a subspace of ℝ³ is W = {(a, b, 1): a and b are real numbers}.
To learn more about subspace visit:
brainly.com/question/13390612
#SPJ11
A new observed data point is included in set of bi-variate data. You find that the slope of the new regression line has changed from 1.7 to 1.1, and the correlation coefficient only changed from +0.60 to +0.61.
This new data point is probably a (an):
A.predicted (y) value.
B.influential point.
C.outlier.
D.extrapolation.
E.residual.
The correct option is B. influential point. An influential point refers to an observation or data point that has a significant impact on the results or conclusions of a statistical analysis.
The new observed data point is included in the set of bi-variate data.
You find that the slope of the new regression line has changed from 1.7 to 1.1, and the correlation coefficient only changed from +0.60 to +0.61. This new data point is probably an influential point.
An influential point is a data point that significantly impacts the results of the statistical analysis done. It can be an outlier, but not necessarily.
A single point can also influence the correlation coefficient, as well as the slope of the regression line. In general, an influential point has a high leverage, meaning that it has a greater impact on the model's predictions than other points.
The slope of the new regression line has changed from 1.7 to 1.1, and the correlation coefficient only changed from +0.60 to +0.61. So the new data point is an influential point.
Therefore, the correct option is B. influential point.
Visit here to learn more about correlation coefficient brainly.com/question/29704223
#SPJ11
7. Show that if g is a primitive root of n, then the numbers g, g², g³,..., g(n) form a reduced residue system (mod n).
If g is a primitive root of n, then the numbers g, g², g³,..., g^(φ(n)) (where φ(n) is Euler's totient function) form a reduced residue system modulo n. This means that the set of numbers represents a complete set of residue classes that are relatively prime to n.
A primitive root of n is an integer g such that the powers of g, modulo n, generate all the numbers in the set of integers relatively prime to n. In other words, g is a generator of the multiplicative group of integers modulo n.
To show that the numbers g, g², g³,..., g^(φ(n)) form a reduced residue system modulo n, we need to demonstrate two properties:
The numbers are distinct modulo n: If we consider any two powers of g, say g^i and g^j (where i and j are integers between 1 and φ(n)), we can show that g^i ≡ g^j (mod n) only if i = j. This follows from the fact that g is a primitive root, and hence the powers of g generate distinct residue classes modulo n.
The numbers are relatively prime to n: Since g is a primitive root of n, it generates all the residue classes relatively prime to n. Therefore, each power of g, g^i (where i ranges from 1 to φ(n)), represents a unique residue class that is relatively prime to n.
By satisfying both properties, the numbers g, g², g³,..., g^(φ(n)) form a reduced residue system modulo n.
Learn more about integer here:
https://brainly.com/question/490943
#SPJ11
How many calories are in a serving of cheese pizza? The article in Consumer Report gave the calories in a 5-ounce serving of supermarket cheese pizza. The calories are: 332 364 393 347 350 353 357 296 358 322 337 323 333 299 316 275 Compute the five - number summary and inter-quartile range. Then make a box and whiskers plot. Comment on the distribution.
The five-number summary for the given data set include the following:
Minimum (Min) = 275.First quartile (Q₁) = 319.Median (Med) = 335.Third quartile (Q₃) = 355.Maximum (Max) = 393.The interquartile range of this data set is equal to 36.
A box and whiskers plot of this data set is shown in the image below and the distribution is approximately symmetric.
How to complete the five number summary of a data set?Based on the information provided about the amount of calories that are in a serving of cheese pizza, we would use a graphical method (box plot) to determine the five-number summary for the given data set as follows:
Minimum (Min) = 275.First quartile (Q₁) = 319.Median (Med) = 335.Third quartile (Q₃) = 356.Maximum (Max) = 393.In Mathematics, the interquartile range (IQR) of a data set is typically calculated as the difference between the first quartile (Q₁) and third quartile (Q₃):
Interquartile range (IQR) of data set = Q₃ - Q₁
Interquartile range (IQR) of data set = 355 - 319
Interquartile range (IQR) of data set = 36.
In conclusion, we can logically deduce that the data distribution is approximately symmetric with a median of 335 and a range of 118.
Read more on interquartile range here: brainly.com/question/17658705
#SPJ4
Let W be the solid region in R with x 20 that is bounded by the three surfaces 2 = 9 - x?. z = 2x2 + y2, and x = 0. Set up, but do not evaluate, two different iterated integrals that each give the value of SI Vxº+ya+z? 4 + z2 dv. + w
By combining all three dimensions, we can now set up the two different iterated integrals for the triple integral of √(x³ + y⁴ + z²) over the solid region W.
Integral 1:
∫∫∫ f(x, y, z) dV = ∫[a,b] ∫[c(x),d(x)] ∫[e(x,y),f(x,y)] √(x³ + y⁴ + z²) dz dy dx
Integral 2:
∫∫∫ f(x, y, z) dV = ∫[a,b] ∫[c(x),d(x)] ∫[e(x,y),f(x,y)] √(x³ + y⁴ + z²) dz dx dy
The given condition x ≥ 0 means that the solid region W lies in the positive x-axis or the right half of the x-axis. This constraint helps us establish the bounds for the integral involving x.
Now, let's focus on the surfaces that bound W:
z = 9 - x²: This is a parabolic surface that opens downward and intersects the xy-plane at z = 9. It represents the upper boundary of the solid region W.
z = 2x² + y²: This is a quadratic surface that represents a paraboloid opening upward. It varies with both x and y and is the lower boundary of W.
x = 0: This is a vertical plane parallel to the yz-plane, which bounds W on the left side.
However, we need to determine the upper limit of the x-integral, which will depend on the intersection of the surfaces z = 9 - x² and z = 2x² + y². To find this intersection, we can equate the two equations and solve for x.
(9 - x²) = (2x² + y²)
Simplifying the equation, we get:
7x² + y² - 9 = 0
Now, we can solve this quadratic equation to find the values of x that correspond to the intersection points. Let's assume the solutions are x = a and x = b, with a ≤ b. These values will give us the bounds for the x-integral, i.e., a ≤ x ≤ b.
Moving on to the y-dimension, we can see that the lower limit will be determined by the shape of the paraboloid surface z = 2x² + y², and the upper limit will be determined by the parabolic surface z = 9 - x². So, we need to express the bounds for the y-integral in terms of x. The y-integral bounds will be y = c(x) to y = d(x), where c(x) and d(x) represent the y-values on the paraboloid surface and the parabolic surface, respectively.
Finally, for the z-dimension, the bounds will be determined by the surfaces z = 2x² + y² and z = 9 - x². These bounds will be denoted as z = e(x, y) to z = f(x, y), where e(x, y) and f(x, y) represent the z-values corresponding to the surfaces.
To know more about integral here
https://brainly.com/question/18125359
#SPJ4
Complete Question:
Let W be the solid region in R³ with x ≥ 0 that is bounded by the three surfaces z = 9-x², z = 2x² + y², and x = 0. Set up, but do not evaluate, two different iterated integrals that each give the value of ∫∫∫√x³+ y⁴ + z² dV
Aligned Sequence =CCCATGTCC CTCATGTTT CGCGTGACC CCGATGGTG Determine the patrogy for where the first in the one. Ashould be indeman HR__H-2H___ WINS ___ HC__ ?
The pattern for where the first in the one should be is HC___.
The pattern for where the first in the one should be is HC___.Given the aligned sequence CCCATGTCC CTCATGTTT CGCGTGACC CCGATGGTG, the pattern for where the first in the one should be is HC___.Here, "C" denotes cysteine, "A" denotes alanine, "T" denotes threonine, "G" denotes glycine. "H" denotes either A, C, or T nucleotides. "W" denotes either A or T nucleotides. "N" denotes any nucleotide. The first position is 'C' in the first codon of the first codon family. The second position is 'T' in the third codon of the second codon family. The third position is 'C' in the first codon of the third codon family.
An biological molecule known as a nucleotide has the basic building blocks of a nitrogenous base, pentose sugar, and phosphate.
As polynucleotides, DNA and RNA are composed of a chain of monomers with various nitrogenous bases. The execution of metabolic and physiological processes requires nucleotides.
Adenosine triphosphate, or ATP, serves as the energy standard for cells. Numerous metabolic processes require nucleotides, which combine to generate a variety of coenzymes and cofactors such coenzyme A, NAD, NADP, and others.
Know more about nucleotides here:
https://brainly.com/question/28178584
#SPJ11
If the odds in favor of Chris winning the election are 6 to 5, then what is the probability that Chris wins? The probability that Chris will win the election is (Type an integer or a simplified fraction.)
The probability that Chris wins the election is 6/11. To determine the probability of an event, we can use the odds in favor of that event. In this case, the odds in favor of Chris winning the election are given as 6 to 5.
The probability of an event is calculated as the favorable outcomes divided by the total possible outcomes. In this case, the favorable outcomes are 6 (representing the 6 possible favorable outcomes for Chris winning) and the total possible outcomes are 6 + 5 = 11 (representing the total of favorable and unfavorable outcomes combined).
Therefore, the probability that Chris wins the election is 6/11.
Learn more about Probability:
https://brainly.com/question/30768613
#SPJ4
Let F2(t) denote the field of rational functions in t over F2. (a) Prove that F2(t)/F2(t) is not Galois. (b) Prove that F1(Ft)/F4(t) is Galois. (c) For which values of n is F2n (t)/F2n (t) Galois? Justify your answer.
(a) F2(t)/F2(t) is not Galois because it is not a separable extension.
(b) F1(Ft)/F4(t) is a separable extension of fields and hence Galois.
(c) F2n (t)/F2n (t) is Galois if and only if n + 1 is finite, i.e., n < ∞.
(a) F2(t)/F2(t) is not Galois because it is not a separable extension. This is because its derivative is 0, meaning that it has a repeated root. Therefore, it does not satisfy the conditions for a Galois extension.
(b) To prove that F1(Ft)/F4(t) is Galois, we need to show that it is both normal and separable.
Normality is straightforward since F1(Ft) is a splitting field over F4(t).
To show that it is separable, we note that the extension is generated by a single element, t, and this element has distinct roots in any algebraic closure of F4.
Therefore, F1(Ft)/F4(t) is a separable extension of fields and hence Galois.
(c) F2n (t)/F2n (t) is Galois if and only if its Galois group is isomorphic to the group of automorphisms of the extension. The Galois group is isomorphic to the group of invertible matrices of size n over F2, which is the general linear group GL(n, F2).GL(n, F2) is a finite group, and hence the extension is Galois if and only if its degree is finite.
The degree of the extension is the dimension of F2n (t) as a vector space over F2n.
This is equal to n + 1, and hence F2n (t)/F2n (t) is Galois if and only if n + 1 is finite, i.e., n < ∞.
To learn more about Galois
https://brainly.com/question/31120128
#SPJ11