Answer:
5.8km=5800m
Explanation:
You have to convert kilometres into metres
Answer:
It's 5,800 meters
Explanation:
In the question the distance has been already given, what's required is converting it from Kilometers to Meters. This means you will need to multiply 5.8 by 1000 to get your answer.
a circularly-polarized antenna is designed to receive a rhcp wave traveling in the z direction. it consists of two wire antennas, one oriented in the x direction and one oriented in the y direction. the signals are combined from each antenna with a 90o phase shift between the two antennas, so that the total open-circuit voltage that is received is
The total open-circuit voltage that is received is 19.41V.
Solution:
RCHP traveling in the z-direction
E = E₁₀ cos(wt - βz) + Ey₀ sin(wt - βz)
E = [tex]\sqrt{E_{y0}^{2} + E^{2} y_{0}[/tex] = [tex]\sqrt{E^{2}_{O} } +E^{2}_{O}[/tex] = [tex]\sqrt{2} .Eo[/tex]
= [tex]\sqrt{2} Eo = 19.41 = Eo = 19.41[/tex]
Open circuit voltage is the voltage difference measured between two terminals when no current is being drawn or supplied. Short-circuit current is the current that flows when the voltage difference between terminals is forced to zero. No current flows in the circuit, but there is a voltage drop between the two points.
As a result, in an open circuit, the current through it is zero but the voltage is present. The current becomes zero and the power equals VI. When an open circuit is introduced, current flow through the circuit is interrupted. The voltage drop across each resistive element is zero when no current is flowing. However, the source potential difference appears to be open.
Learn more about Open circuit voltage here:-https://brainly.com/question/26579033
#SPJ4
What new rock formations did you see when the landscape was only exposed to energy from the sun?.
The rock formations that are visible when the landscape is exposed to energy from the sun are sedimentary rocks.
A landscape is a geomorphological unit that is categorized based on characteristics such as elevation, slope, orientation, stratification, rock exposure, and soil type.
Sedimentary rock or also known as sedimentary rock is a rock that forms on the surface of the earth under conditions of low temperature and pressure. These rocks originate from rocks that were formed earlier, which experience weathering, and erosion, and then weathering is transported by water, air, or ice, which are then deposited and accumulate in depositional basins, forming sediments. These sedimentary materials then compact, harden, undergo lithification, and form sedimentary rocks.
Learn more about the type of rock here :
https://brainly.com/question/2514852
#SPJ4
A train travelling along a straight track starts from rest at point A and accelerates uniformly to 20m/s in 20 s It travels at this speed for 60 s, then slows down unformly to rest in 40 s at point C . It stays at rest at C for 30 s ,then reverse direction , accelerating uniformly to 10m/s in 10 s , it travel at thos speed for 30 s ,then slows down uniformly to rest in 10 s when it reaches point B.
a , plot a graph of the motion of the train
b , use your graph to calculate
1, the train's displacement from point A when it reaches point C
2 , the train's displacement from point A when it reaches point B
3 , the train accelerate each time its speed change .
The train's displacement from point A when it reaches point C = 1800m
The train's displacement from point A when it reaches point B =1800m
The train accelerate each time its speed change =1 m/s² and -0.5 m/s²
a. Plot of graph is mentioned in the image .
b. Now from the plot -
To find the train's displacement , we have to compute the areas under the curve .[tex]Area \\of\\Triangle = [ base * height ]/2\\[/tex]
[tex]S= [ 20 *20 +60*20 +40*20 ]/2 = 1800 m[/tex]
These are the sums of the areas on the graph from t=0 to t=120.
2. Since the train was at rest from point C till point B, the displacement remains the same -
S=1800m
3. To calculate the value of acceleration:-
[tex]0 < t < 20 ---------- > a= 20m/s / 20 s =1m/s^{2} \\[/tex]
[tex]80 < t < 120-------- > a=-20ms^-1/40s =-0.5m/s^{2}[/tex]
To learn more about acceleration -
https://brainly.com/question/3941786
#SPJ1
how many tightly bound molecules could a single ray of frequency 2.77 x 1020 hz break apart? the binding energy of such a molecule is 10 ev. your answer should be a number with two decimal places in the form: n x 105, indicate only n.
Answer:
E = h ν
E = 6.63E-34 * 2.77E20 = 1.84E-13 energy of incident beam
1 eV = 1.60E-19 10 eV = 1.60E-18 Joules
n = 1.84E-13 / 1.60E-18 = 1.15E5
n = 1.15
a bullet with a mass of 25 grams is traveling at a speed of 250 m/s. the bullet encounters a 35-kg wooden block at rest and upon impact, gets embedded within the block. what is the velocity with which the objects move together after the collision?
The velocity with which the objects move together after the collision is 5.604 m/s
State the the law of momentum conservation.
The following is an explanation of the law of momentum conservation.
The total momentum of the two objects prior to the collision is equal to the total momentum of the two following the collision for an impact between object 1 and object 2 in an isolated system. In other words, the momentum obtained by the object 2 equals the momentum missed by object 1.The bullet and the block have the same speed after colliding, therefore we utilize momentum conservation and account for that.
mv1_i + Mv2_i = mv1_f + Mv2_f
Given values from the question,
Mass of bullet = m =25 g = 0.025 kg
Mass of wooden block = M = 35 kg
Initial speed of bullet = v1_i = 250 m/s
Putting the values in the momentum conservation equation,
mv1_i + 0 = (m + M) V
0.025 x 250 = (0.025 + 35) V
V = 35.025 / 6.25
= 5.604 m/s
Hence, the velocity with which the objects move together after the collision is 5.604 m/s
To learn more about momentum conservation from the given link
https://brainly.com/question/7538238
#SPJ4
The slope of a straight line displacement - time graph indicates
Answer: velocity
Explanation:
Your slope is calculated as [tex]\frac{y_{2}-y_{1}}{x_{2}-x_{1}} =\frac{displacement}{time}[/tex], which equals velocity.
What is the relative age of the crater copernicus?
The relative age of the crater Copernicus is 800 million years.
Crater is nothing but a large bowl-shaped cavity in the ground or on a celestial object, typically one caused by an explosion or the impact of a meteorite.
Copernicus is a lunar impact crater located in eastern Oceanus Procellarum. It was named after the astronomer Nicolaus Copernicus. It typifies craters that formed during the Copernican period in that it has a prominent ray system. It one of the most prominent craters on the Moon. It constitutes a classic example of a relatively young, well-preserved lunar impact crater.
To know more about crater, visit here
https://brainly.com/question/27755086
#SPJ4
a quarterback throws a football while standing at the very center of the field on the -yard line. the ball leaves his hand at a height of and has initial velocity assume an acceleration of due to gravity and that the vector points down the field toward the endzone and the vector points to the sideline. the field is in width and in length. determine the position function that gives the position of the ball seconds after it is thrown. the ball is caught by a player above the ground. is the player in bounds or out of bounds when he receives the ball? assume the player is standing vertically with both toes on the ground at the time of reception.
To learn the acceleration and velocity to find the solution.
What is acceleration?
The rate at which the speed and direction of a moving object change over time is known as acceleration. Any movement, whether straighter, faster, or slower, is referred to as acceleration. The fact that the direction is constantly shifting causes motion on a circle to accelerate even though the speed is constant.
What is velocity?
The velocity of a body or object determines the direction of its motion. Speed is often measured as a scalar value. The most basic definition of a vector quantity is velocity. It gauges the rate at which a distance varies. It relates to the speed at which displacement is altering.
Initial height = 6ft
initial velocity v₀= 41i+3gj+27k
assume upwards, as +k acceleration
due to gravity= -9.8m/s²k or
=-32ft/s² k
initial height (s₀)= 6k
position of the ball, after t secs
s= s₀+v₀t+1/2a₀t²
s=6k+(41i+3gj+27k) t+1/2(-32k)t²
r(t)=s=41 i+3gtj +(27t-16t²=6)k ⇒ 1
If the ball is catch by a player 6A above ground
s=6k
so comparing with equation 1
6=27t-16t²+6⇒ t(27-16t)=0
t=0 and t=27/6k =1.6875sec
at t=1.6875sec
from equation 1 r(1.675)=s=69.1815i+65.8125j+6k
so( 69.1875, 65.8125,6)
So he is in bound after he catches the ball.
Therefore, he is in bound after he catches the ball.
Learn more about acceleration from the given link.
https://brainly.com/question/460763
#SPJ4
Which term found in the electromagnetic spectrum is determined by its wavelength?.
Color is the term found in the electromagnetic spectrum is determined by its wavelength.
Radio waves, gamma-rays, visible light, and all the other elements of the electromagnetic spectrum are electromagnetic radiation. Electromagnetic radiation can be defined in phrases of a movement of mass-much less particles, called photons, each visiting in a wave-like pattern at the velocity of light.
Wavelength is the space from one point on a wave to the same point on the subsequent wave. Frequency is the range of waves that skip through a factor in a 2d. Chemistry Interaction of light with count number.
The wavelength of light is an essential property for it's miles this that determines the character of the light. pink light has a distinctive wavelength to that of blue mild and green mild has a specific wavelength from each of them.
Learn more about electromagnetic spectrum here:- https://brainly.com/question/23423065
#SPJ4
Enzo is developing a model of the electron transport chain. What is the role of atp and nadh in the model?.
The role of ATP and NADH in the model is that the ATP is used to synthesize NADH in one step of the chain.
What is meant by ATP?ATP is an organic substance that supplies energy to several functions in living cells, including muscular contraction, nerve signal propagation, condensate dissolving, and chemical synthesis. ATP is the molecular unit of currency of intracellular energy transfer and is found in all known forms of life. When it is utilized in metabolic processes, it either changes to adenosine diphosphate (ADP) or adenosine monophosphate (AMP) (AMP). Other processes recycle ATP. Every day, the human body recycles its own body weight equal in ATP. It is also a coenzyme and a precursor of DNA and RNA. So, ATP is used to synthesize NADH in one step of the chain.
To know more about ATP, visit:
https://brainly.com/question/14637256
#SPJ4
A plane travels a distance of 5. 0×102 m north while being accelerated uniformly from rest at the rate of 5. 0 m/s2. What final velocity does it attain?.
The final velocity it attains is 70.7 m/s
Velocity is the directional velocity of an object in movement as a demonstration of its price of exchange in function as found from a specific body of reference and as measured by using a specific well-known time.
Speed is the time fee at which an item is shifting along a direction, at the same time as velocity is the rate and route of an object's movement. placed any other way, speed is a scalar cost, whilst pace is a vector.
Speed is the velocity at which something moves in a selected course. for example, the velocity of a car traveling north on a highway, or the velocity at which a rocket travels after launching. In the scalar manner, the absolute price value of the rate vector is continually the velocity of the motion.
Calculation:-
v² = U² + 2aS
V² = 0 + 2×5×500
V² = 5000
V = 70.7 m/s
Learn more about velocity here:-brainly.com/question/24445340
#SPJ4
now the switch is closed, and you wait for a long time. how much electric charge does the capacitor store now?
The electric charge the capacitor store now is 0.065 C.
What is a capacitor?
A capacitor is a device that uses the accumulation of electric charges on two nearby surfaces that are electrically isolated from one another to store electrical energy in an electric field. It has two terminals and is a passive electrical component. referrer=search Results refers to a capacitor's effect. Initially when switch S is open for a long time the charge stored on the capacitor is given by the following equation.
The solution to this question is too large so I am adding this screenshot kindly check the attachment:
Now final charge on the capacitor after closing the switch for a long time
Q = CE
Q = 3.65*10^{-3}*17.76= 0.065 C
Hence, the electric charge the capacitor store now is 0.065 C.
To learn more about the capacitor
https://brainly.com/question/21496295?
#SPJ4
place the elements in order from smallest to largest atomic number.
iron
sodium
uranium
neon
silicon
Answer: Neon,Sodium, Silicon, Iron and Uranium.
Find the magnitude and vector direction of the sum of these two vectors:
Magnitude of the resultant vector is 20.03.
What is resultant vector?A resultant vector is described as a single vector that has the same consequence as several other vectors taken together. To create the resulting vector, two vectors facing the opposite direction are subtracted from one another. Here, the vector B is pointing in the opposite direction of the vector A, and the resulting vector is called R.
Resultant vector = [tex]\sqrt{A^2 + B^2 + 2AB cos\theta}[/tex]
Resultant vector = [tex]\sqrt{9.66^2 + 12^2 + 2(9.66)(12) cos45}[/tex]
Resultant vector = 20.03
Magnitude of the resultant vector is is 20.03.
To learn more about vector refer to the link:
brainly.com/question/24256726
#SPJ1
A sarcomere that is at a resting length of 1. 7um will generate __________________ force compared to a sarcomere at 2. 15um.
A sarcomere will produce its greatest amount of active force at a resting size of 1. 7 um rather than 2. 15 um.
Sarcomeres: what are they and what do they do?Sarcomeres are referred to as the basic contractile unit or muscle fiber. The two main protein filaments that make up each sarcomere and are responsible for triggering muscle contraction are myosin and actin. The most popular idea cited to explain how muscles contract is the hypodermic needle theory.
The Function of Sarcomeres
Muscle cells can be observed to have stripes-like striations under a microscope. This pattern is made up of a collection of basic muscle tissue units called sarcomeres that are stacked one on top of the other.
To know more about sarcomere, visit:
https://brainly.com/question/7511121
#SPJ4
Test
Consider two planets that have the same mass but are very different in size. Which statement describes the gravitational pull
that an object would experience on the surface on each planet? (1 point)
O The object would experience a much greater gravitational pull on the larger planet.
O The object would experience the same gravitational pull on each planet.
O The object would experience only a slightly greater gravitational pull on the larger planet.
O The object would experience a greater gravitational pull on the smaller planet.
When an object is placed on the surface of two planets that have the same mass but are very different in size, then the the object would experience a greater gravitational pull on the smaller planet.
What is the weight of an object and what is acceleration due to gravity?
Weight of an object:
The force exerted by gravity on a body or an object is known as weight.The formula provides the weight of an object mathematically;W = mg
Where;
The object's mass is m.
Gravitational acceleration, or g, is measured.
Acceleration due to gravity, g:
The acceleration that objects experience due to the combined action of gravity and centrifugal force is known as the Earth's gravity, or g, and it is represented by the Greek letter g.The formula for calculating gravitational acceleration is g = GM/r2.The square of the distance from the planet's core and the acceleration caused by gravity, or g, are inversely proportional. Likewise, if there were two planets with the same mass but different sizes. Take into account the fact that planet A's radius is smaller than planet B's radius. This implies that the planet A's g will be higher than the planet B's g. Since the object's mass is constant, the weight of the object on planet A will be higher than the weight of the object on planet B.
Hence, The object would experience a greater gravitational pull on the smaller planet.
To learn more weight of an object from the given link
https://brainly.com/question/18351959
#SPJ9
7) someone suggests that astronomers build a special gamma-ray detector to detect gamma rays produced during the proton-proton chain in the core of the sun, just like they built a neutrino detector. explain why this would be a fruitless effort.
Through the act of counting and calculating the energy of single photons emitted from elements, gamma ray detectors calculate electromagnetic radiation.
Gamma-ray detection is carried out photon-by-photon, just as X-ray detection. By observing the impact they have on materials, gamma rays can be found. A gamma ray can drive an electron to a higher level or collide with it and cause it to scatter like a pool cue (Compton scatter) (photoelectric ionization).
Protons are transformed into neutrons, positrons, and electron neutrinos as part of the proton-proton chain, which generates a significant amount of energy. The primary reaction in the majority of main-sequence stars, including the Sun, is the proton-proton chain. A nuclear fusion reaction, the proton-proton chain releases energy as the energy in the nuclear bonds diminishes. To counteract the protons' natural tendency to resist one another, smaller nuclei must have more energy.
An atom of the unstable isotope germanium-71 can be created when a neutrino interacts with a gallium-71 atom. The germanium was then concentrated and removed chemically. As a result, neutrinos were discovered by monitoring germanium's radioactive decay.
To know more about proton-proton chain, click on the link below:
https://brainly.com/question/11736501
#SPJ4
A 325 kg boulder falls straight down from a cliff. The force of gravity
pulling it downward is -3185 N, while the force of air resistance acting
upward is +370 N.
Find the net force on the bolder then use 'Fnet = m a' to find its
acceleration.
F₂=3185/
Answer: -8.66 m/s2 (down)
Explanation:
Find the mass of the boulder:
F = ma
m=F/a = -3125N/9.8 m/s2 = 325 kg
F net = -3125 N + 370 N = -2815 N
now you can find a:
a = F/m = -2185 N / 325 kg = -8.66 m/s2
an electron-volt (ev) is the amount of energy needed to move a single electron from an electric potential of 0 to an electric potential of -1 v. the charge of an electron is approximately -1.602 x10-19 c. how many joules is an electron volt?
The joules carrier by an electron volt will be = 1.602 x 10-19 J
What do you mean by electric potential?
Electric potential can be defined as the amount of work which is needed to move an unit charge from a reference point to a specific point against an electric field.
It can be calculated by the given formula
V=kQ/r or V = k Q / r . It is a scalar quantity while the electric field is a vector.
Uses of Electric Potential.
Potential energy a test charge would have at a given location due to a source charge.An incandescent light bulb that is turned off. To measure light and heat energy.Hence, in the above question the joules carrier by an electron volt will be = 1.602 x 10-19 J.
To know more about Electric Potential from the given link
https://brainly.com/question/26978297
#SPJ4
A lightbulb is wired to a variable resistor. What will happen to the color spectrum emitted by the bulb as the resistance of the circuit is increased? explain.
The color spectrum emitted by the bulb as the resistance of the circuit is increased is red.
Rt - Ro = 1 + α ΔT
Rt = Final resistance
Ro = Initial resistance
α = Coefficient of resistivity
ΔT = Change in temperature
Rt - Ro ∝ ΔT
Therefore, resistance is directly proportional to temperature.
As resistance increase, temperature also increases. As temperature increase, the molecules will vibrate faster and the wavelength will be shorter and the frequency will be higher. Since red has the shortest wavelength in the visible spectrum, the bulb will appear red.
Therefore, the color spectrum emitted by the bulb as the resistance of the circuit is increased is red.
To know more about color spectrum
https://brainly.com/question/12951508
#SPJ4
true or false: the vast size of our solar system makes it impossible for a large, civilization-threatening asteroid or comet to collide with earth.
The vast size of our solar system makes it impossible for a large, civilization-threatening asteroid or comet to collide with earth is the False statement.
What is an asteroid?Small, stony objects called asteroids orbit the Sun. Despite orbiting the Sun similarly to planets, asteroids are far smaller than planets. Small, stony objects called asteroids orbit the sun.
What is a comet?Large ice and dust-based bodies known as comets orbiting the Sun. Most recognisable for their lengthy, streaming tails.
Comet or large, civilization-threatening asteroid has nothing to do with the vastness of solar system in effecting the earth from damage to the human race or to destroy it completely.
Civilization-threatening asteroid or comet large enough to do serious damage to the human race will eventually collide with Earth even if the solar system is very vast.
Hence, the vast size of our solar system makes it impossible for a large, civilization-threatening asteroid or comet to collide with earth is the False statement.
To know more about the asteroid visit
https://brainly.com/question/28543341
#SPJ4
A ferris wheel has radius 5. 0 m and makes one revolution every 8. 0 s with uniform rotation. A person who normally weighs 670 n is sitting on one of the benches attached at the rim of the wheel. What is the apparent weight (the normal force exerted on her by the bench) of the person as she passes through the highest point of her motion?.
As she crosses the highest point of her motion, the person appears to weigh 460 N.
What is meant by apparent weight?In physics, an object's apparent weight, which reflects its actual weight, is a characteristic. When an object's force of gravity is not counterbalanced by a normal force that is equal to but opposed to it, the apparent weight of the object will differ from the actual weight of the object. An object's weight is equal to the strength of the gravitational force pulling on it by definition.
Given,
The radius of the wheel, r = 5.0 m
Time, t = 8.0 s
And the weight of the person, W = 670 N
The following formula is used to determine the person's apparent weight as she crosses the highest point of her motion:
R=m(g-a)
Let the mass of the person is,
m=W/g
m=670/9.8
m=68.37kg
Now, we have to calculate the acceleration of a person,
a=(ω²)r
a=((1rev/8s)×(2Πrad/1rev))×5m
a=3.08 m/s²
Therefore, the apparent weight is calculated as follows:
R=68.37(9.8=3.08)
R=460N
As a result, the person appears to weigh 460 N as she crosses the highest point of her motion.
To know more about apparent weight, visit:
https://brainly.com/question/14323035
#SPJ4
a man falls 2.0 m to the floor (assume down to be negative)
how long does the fall take?
what is his velocity when he hits the floor?
Answer:
Approximately [tex]0.64\; {\rm s}[/tex].
Velocity: approximately [tex]6.3\; {\rm m\cdot s^{-1}}[/tex].
(Assuming that air resistance is negligible, and that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex] assuming that the fall started from rest.)
Explanation:
If air resistance is negligible, acceleration will be constantly [tex]a = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex] during the fall.
Let [tex]x[/tex] denote the displacement. In this question, [tex]x = (-2.0)\; {\rm m}[/tex]. Note that [tex]x[/tex] is negative since the position after the fall is below the initial position.
The initial velocity at the beginning of the fall is [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] under the assumptions.
Let [tex]v[/tex] denote the final velocity right before landing. Apply the SUVAT equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex] to find [tex]v\![/tex]. Rearrange this equation to obtain:
[tex]\begin{aligned}v &= \sqrt{2\, a\, x + u^{2}} \end{aligned}[/tex].
Substitute in [tex]a = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex], [tex]x = (-2.0)\; {\rm m}[/tex], and [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] and solve for [tex]v[/tex]
[tex]\begin{aligned}v &= -\sqrt{2\, a\, x + u^{2}} \\ &= -\sqrt{2 \,((-9.81)\; {\rm m\cdot s^{-2}}) \, ((-2.0)\; {\rm m}) + (0\; {\rm m\cdot s^{-1}})^{2}} \\ &= \left(-\sqrt{2 \, (-9.81)\, (-2.0)}\right)\; {\rm m\cdot s^{-1}} \\ &\approx (-6.26)\; {\rm m\cdot s^{-1}} \\ &\approx (-6.3)\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
(Negative since the final velocity points downwards to the ground.)
In other words, the velocity right before landing would be approximately [tex](-6.3)\; {\rm m\cdot s^{-1}}[/tex].
The change in velocity during the fall would be:
[tex]\begin{aligned}v - u &\approx (-6.26)\; {\rm m\cdot s^{-1}} - (0\; {\rm m\cdot s^{-1}}) = (-6.26)\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
Divide the change in velocity by acceleration to find the duration [tex]t[/tex] of the fall:
[tex]\begin{aligned}t &= \frac{v - u}{a} \\ &\approx \frac{(-6.26)\; {\rm m\cdot s^{-1}}}{(-9.81)\; {\rm m\cdot s^{-2}}} \\ &\approx 0.64\; {\rm s}\end{aligned}[/tex].
Consider a person of weight w standing in an elevator that is accelerating downward. An upward force n is exerted by the elevator floor on the person. The relationship between n and w is.
W-weighted person standing in an escalator that is descending quickly. The person is subjected to an upward force of N from the elevator floor. (Reply N=W.)
What does an elevator do?A vehicle that travels in a mine shaft to transport people or cargo between floors of a multi - storey building is an elevator, also known as a lift. The majority of contemporary elevators are moved by electric motors through a network of cables & sheaves with the help of a counterweight (pulleys).
What makes it an elevator?The word "elevator" is really the name of the a lift manufactured by a firm in the US. People began to refer to elevators as elevators since the company was just so successful and put them in so many locations.
To know more about Elevator visit:
https://brainly.com/question/481548
#SPJ4A box of mass 3 kg is lifted 1. 5 m onto a shelf. Calculate the change in its gravitational potential energy. The gravitational field strength is 10 n/kg.
A box of mass 3 kg is lifted 1. 5 m onto a shelf. The change in its gravitational potential energy is 45 Joule.
The change of gravitational potential energy is equal to the work done on the box.
ΔEp = W
Where:
ΔEp = change of gravitational potential energy
W = work done
W = F x d
Where
F = force
d = distance
From the problem,
F = 3 kg x 10 N/kg = 30 N
d = 1.5 m
Hence,
W = 30 x 1.5 = 45 Joule
Therefore, the change of the gravitational potential energy is:
ΔEp = W = 45 Joule.
Learn more about potential energy here:
https://brainly.com/question/24933254
#SPJ4
suppose you had a beam that is 1.51.5m in length and you place a fulcrum .25.25m from the left end of the beam (assume the beam is massless). you have a block of mass 77kg and you place it .3.3m from the right end of the beam. what is the torque on the beam?
The torque on the beam calculated from the principle of moments is 68 N to the right.
What is the torque on the beam?The torque on the beam is calculated using the principle of moments.
The principle of moments states that the sum of the clockwise moments is equal to the sum of the anticlockwise moments about a fixed point for a system in equilibrium.
Moment = force * perpendicular distance from the fulcrum
Taking the left end of the beam as the anticlockwise direction ad the right end of the beam as the clockwise direction:
Anticlockwise moment = F * (0.75 - 0.25)
Where F is the balancing force
Anticlockwise moment = 0.5f
Clockwise moment = (0.77 * 9.8) * (0.75 - 0.3)
Clockwise moment = 34 J
0.5 F = 34
F = 68 N
Hence, torque is 68 N
Learn more about torque at: https://brainly.com/question/20691242
#SPJ1
Typically what percentage of a block of wood will be submerged if placed in water? Take the density of wood to be 103 kg/m^3. O A. Cannot be determined. B. 49.7 % C. 24.7 % D. 10.3 % Click Save and Submit to save and submit. Click Save All Answers to save all answers. Save All Answers
It will be 10.3% (D) of a block of wood will be submerged if placed in water based on the density of wood given.
Density is the substance's mass per unit of volume. The symbol most often used for density is ρ.
How to calculate the block of wood percentage that will be submerged in water?
Density of water = 1000 kg/m³
Density of the wood = 103kg/m³
If V be the volume of the wood and x be the volume of the wood inside the water then
Vρwood*g = Vρw*g
[tex]\frac{x}{v} = \frac{103}{1000}[/tex]
Percentage of volume of the wooden block submerged in the water is
[tex]\frac{x}{v}*100 = \frac{103}{1000} * 100[/tex]
= 10.3%
So 10.3% will be the percentage of a block of wood that will be submerged if place in water, and the answer is D.
Learn more about density https://brainly.com/question/952755
#SPJ4
Jocelyn estimates that a piece of wood measures 5. 5 cm. If it actually measures 5. 62 cm, what is the percent error of jocelyn’s estimate?.
The percentage error of Jocelyn's estimate is 2.135%
Estimated measurement of wood by Jocelyn = 5.5 cm
Actual measurement of wood = 5.62 cm
error value in calculation = 5.62-5.5 = 0.12 cm
Percentage error = (estimated number - actual number) / (actual number) * 100 = (0.12/5.62)*100
= 2.135 %
What is percentage-
% in mathematics is a quantity or ratio that is stated as a fraction of 100 Although the abbreviations "pct.", "pct.", and occasionally "pc" are also used, the percent sign, "%," is frequently used to indicate it lacks dimensions and has no associated unit of measurement.
To know more about Percentage Error here:
brainly.com/question/28746643
#SPJ4
the magnetic field strength at the north pole of a 2.0- cm -diameter, 8- cm -long alnico magnet is 0.10 t . to produce the same field with a solenoid of the same size, carrying a current of 2.0 a , how many turns of wire would you need?
Magnetic field - You would need N = 3032 of wire.
What is a magnetic field?
The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is traveling through a magnetic field.
As seen in the following equation, a solenoid's magnetic field is
B = μ₀ n I
where n is the turn density, I is current and has a permittivity in a vacuum of 4 107 N/A2.
Let's use this equation to solve the issue; in this case, the length of the magnet is the unit of length, and the turn density is the number of turns per unit length.
L = 8 cm = 0.08 m
Let's compute.
B = μ₀ N/L I
N = B L / μ₀ I
N = 0.10 0.08 / (4π 10⁻⁷ 2.1)
3,032 103 turns,
Hence, the number of turns is 3032.
To learn more about the magnetic field the link is given below:
https://brainly.com/question/17136235
#SPJ4
The kinetics of the decomposition of phosphine at 950 k was followed by measuring the total pressure in the system as a function of time. The data in the table were obtained in a run where the reaction chamber contained only pure phosphine at the start of the reaction.
Select the rate law that best explains this reaction: Rate = k we discovered that the dissociation of phosphonate occurs in the first order, which exhibits the linear relationship between the pressure and time.
Phosphonates: Are they harmful?People are only slightly to moderately toxic to phosphonates. If phosphonates are consumed, they are quickly removed from the body through feces because they are not swallowed up either by digestive system. Due to the limited likelihood that phosphonates will build up in the body, ingestion through the epidermis is similarly unlikely to be harmful.
Where does phosphine come from?On Earth, Jupiter, plus Saturn, scientists have found the chemical molecule phosphonate. It is made up of three hydrogen atoms and one phosphorus atom. It happens frequently on gas giants alone, when both of the atmospheres are drenched in hydrogen.
To know more about phosphine visit:
https://brainly.com/question/15023535
#SPJ4