Match each microscope with the appropriate description.
transmission electron microscope
scanning electron microscope
compound light microscope
scanning tunneling microscope

has a magnification of 400 to 1,000 times
has a magnification of 100,000 times or
produces a three-dimensional image
maps atoms on the surface of an object

The correct statements regarding the formation of electrophiles are:

B) This mechanism predicts the rate law, rate-k[Cl[FeCl3 which is not in agreement with that observed rate.

D) This mechanism requires that all aromatics, both electron-rich and electron-poor react at the same rate.

An electrophile is a chemical entity that joins with nucleophiles by taking up a pair of electrons in chemistry. Electrophiles are Lewis acids because they receive electrons. The majority of electrophiles have an atom that has a partial positive charge, is positively charged, or lacks an octet of electrons.

1st statement is wrong. Because a mechanism with 4 steps is possible.

2nd statement is correct. Because in the rate determining step only Cl2 and FeCl3 are involved.

3rd statement is wrong. Because if Cl+ is unstable. Then its formation must be rate-determining step. It will not be a fast step.

4th statement is correct. Because the attack of benzene on Cl+ is a fast step. Therefore electron-rich and electron-poor aromatic will react at the same rate.

The correct statements regarding the formation of electrophiles are:

B) This mechanism predicts the rate law, rate-k[Cl[FeCl3 which is not in agreement with that observed rate.

D) This mechanism requires that all aromatics, both electron-rich and electron-poor react at the same rate.

To refer more about Electrophiles visit:

https://brainly.com/question/10794153

#SPJ4

The new volume can be find out by the Boyle's law. The volume changes from 250 ml to  83.3 ml at a pressure of 3 atm.

Boyle's law states that at constant temperature, the volume of a gas is inversely proportional to the pressure of the gas.

Thus, PV= a constant.

Let P1 and V1 be the initial pressure and volume and P2, V2 be the final amounts. then:

P1 V1 = P2 V2.

Given the initial pressure = 1 atm

volume = 250 ml

final pressure = 3 atm

final volume V2 =  P1 V1/ P2

= (1 atm × 250 ml)/ 3 atm

= 83.3 ml.

Therefore, the final volume is 83.3ml.

To find more on Boyle's law, refer here:

https://brainly.com/question/1437490

#SPJ1

If an object has a force of 13.5 newtons, 3 lb would it weigh in pounds.

According to Newton's Second Law of Motion, acceleration (gaining speed) occurs whenever a force acts on a mass (object). Riding a bicycle is a great example of this rule of motion in action. The mass is your bicycle. The force is generated by leg muscles pulling on your bicycle's pedals.

As we know from Newton's 2nd law of motion,

F = mg

here, F = 13.5 N

g = 9.8 m/sec

m = ?

Now, putting the values, F = mg

13.5 N = m × 9.8 m/sec

m = (13.5 N)÷(9.8 m/sec)

m = 1.378 kg

m = 3.04 lb      [ As, 1 kg = 2.2046 lbs ]

To know more about force refer to:

https://brainly.com/question/12785175

#SPJ1

The element that is an inner-transition, actinide, AND a trans-uranium element is Lawrencium. Lr

Option B is correct.

The trans-uranium elements are described as the chemical elements with atomic numbers greater than 92, which is the atomic number of uranium.

The trans-uranium elements  are unstable and decay radioactively into other elements.  The trans-uranium elements do not occur naturally on Earth and are synthetic except with the exception of neptunium and plutonium.

Learn more about elements at: https://brainly.com/question/6258301

#SPJ1

a) The order of the reaction with respect to the complex is 1 and order with respect to Y is 2.

b) The rate constant for reaction is 2.2 × 10⁹ mol⁻²dm⁶s⁻¹.

What is order of reaction and rate constant?

The order of reaction is defined as sum of the power raised to the concentration terms . The rate constant defined as the relation between concentration and rate of the reaction, and it is also temperature dependent.

Using Rate = K [complex]ᵃ [Y]ᵇ

a)  125 = K (8.01) ᵃ (2.7) ᵇ

144= K (9.22) ᵃ (2.7) ᵇ

Divide these two equations

125/144 = (8.01/ 9.22) ᵃ

(0.868) = (0.868) ᵃ

⇒ a= 1 order with respect to complex is 1

b)  R₂=K(complex)ᵃ(Y)ᵇ

125=K (8.01) (2.7) ᵇ

640=K (8.01) 6.1) ᵇ

Divide these two equations

we get, 0.195 = (0.443)ᵇ

⇒ b= 2 order with respect to Y is 2.

Now Rate constant

125=K (8.01) ¹ (2.7) ²

K = 2.2 ₓ 10⁹mol⁻²dm⁶s⁻¹.

For more information about rate of reaction please visit:

https://brainly.com/question/15269961

#SPJ4

A kite is an example of a process because the kinetic energy makes up the energy of a kite in flight.

The upward deflection of the wind-moving air by the kite results in the lift. According to Newton's principles, the wind's altered momentum causes the kite to be pulled upward. This is comparable to the force a tennis ball applies to a wall as it bounces off the wall and alters its course.

Kinetic energy makes up the energy of a kite in flight.

The kite's center of pressure is the location where all of these forces—lift, drag, gravity, and wind thrust—converge. It should come as no surprise that knots your kite string there. Call this the tow point or the bridle point.

To know more about kites refer to:

https://brainly.com/question/28239848

#SPJ1

The complete question is as follows:

A kite is an example of what?

(A) A system

(B) A process

(C)A pattern

(D)A change

Taking into account the reaction stoichiometry, the correct answer is the second option: a mass of H₂ of 1.10 grams is required to react with 8.75 g of O₂.

In first place, the balanced reaction is:

O₂ + 2 H₂  → H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 32 grams of O₂ react with 4 grams of H₂, 8.75 grams of O₂ react with how much mass of H₂?

mass of H₂= (8.75 grams of O₂×4 grams of H₂) ÷32 grams of O₂

mass of H₂= 1.10 grams

Finally, 1.10 grams of H₂ is required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

The sample of argon gas that has the same number of atoms as a 100 milliliter sample of helium gas at 1.0 atm and 300 is 100. mL at 1.0 atm and 300. K

The correct option is D.

The number of moles of gases in each of the given samples of gas is found below using the ideal gas equation.

The ideal gas equation is: PV/RT = n

where;

Moles of gas in the given helium gas sample:

P = 1.0 atm, V = 100 mL or 0.1 L, T = 300 K

n =  1 * 0.1 / 0.082 * 300

n = 0.00406 moles

For the argon gas sample:

A. n =  1 * 0.05 / 0.082 * 300

n = 0.00203 moles

B. n =  0.5 * 0.05 / 0.082 * 300

n = 0.00102 moles

C. n =  0.5 * 0.1 / 0.082 * 300

n = 0.00203 moles

D. n =  1 * 0.1 / 0.082 * 300

n = 0.00406 moles

Learn more about ideal gas equation at: https://brainly.com/question/24236411

#SPJ1

There are natural forces such as the one between two surfaces that rub, called friction. Another force is gravity, that pulls us to the center of the Earth.

Many forces can be found acting on the same object. When two forces act in the same direction, we sum the forces to find net force the force. This causes friction the forces are in the movement of the object. speed up, slow down, change direction or

19. An inclined plane is often called a ramp - It is a flat surface.

Force is defined as the product of mass and acceleration. It is a derived quantity and measured in Newtons ( N ). This goes to say that the S.I unit of force is Newton. However, foce is also measured in kilograms per meters squared.

There are two major types of force, there are:

In conclusion, we can now confirm from the explanation given above that force is obtained from the combination of fundamental quantities.

Read more on force:

https://brainly.com/question/12970081

#SPJ1

Answer:

It's 39.43g

Explanation:

molarity is the ratio of the number of moles over the volume in a litter while the number of moles is the ratio of the mass of solute over the molar mass of compounds

        Ag,  first image

        F₂, second image

          CO, Third  image

         PbI₄

Atomic elements are chemical species that can exist as independent atoms, for ex-Ag, Au.

elements that exist in a free state in the molecular form are, molecular elements, for ex -Cl₂, I₂.

Molecular compounds are substances that consist of bonding between atoms of different elements. for ex-H₂O .

Ionic compounds are compounds that are formed by the reaction of metal with non-metal. for ex - NaCl.

know more about 'Classification of elements ' here :

brainly.in/question/1424856

The correct option is d) isolated, decrease.

What are fatty acids?

Fatty acids are long chain aliphatic hydrocarbons having carboxylic acids as a functional group. Fatty acids are classified into saturated and unsaturated. And also, important part of biomolecules.

Naturally occurring fatty acids have even number of carbon atoms and unbranched.  Most of the naturally occurring fatty acids are not conjugated so the melting point of fatty acids decreases as number of bonds increases.

The increase in number of double bonds will create kinks, this restricts the molecule to be closed packed hence melting point decreases.

For more information about fatty acids please visit:

https://brainly.com/question/26353151

#SPJ4

Using their condensed structural formulas, the rank of homologous series for the given set of alkanes by their boiling point is as:

Heptane (C₇H₁₆) > hexane (C₆H₁₄) > 3,3-dimethylpentane (C₇H₁₆) > butane (C₄H₁₀)

The alkane homologous series' members should have higher boiling points as we move down the group. For example, it is expected that butane will have a greater BP than ethane. We will also consider the presence of branch chain alkane because it also affects the boiling point. Due to the larger van der Waals forces between adjacent molecules in straight-chain alkanes, their boiling points are higher. By considering the above properties the sequence will be as:

Heptane (C₇H₁₆) > hexane (C₆H₁₄) > 3,3-dimethylpentane (C₇H₁₆) > butane (C₄H₁₀)

You can also learn about structural formulas from the following question:

https://brainly.com/question/14611418

#SPJ4

Gas has a molecular volume of 22.4 litres at 273 K and 1 atm. The answer to the given question is 1 atm, 1 mol, and 273°C, or 546K.

STP is frequently used when calculating gas properties, like gas density. The standard pressure is 1 atm, and the standard temperature is 273 K (0° Celsius or 32° Fahrenheit). At atp equal at sea level, this is the freezing point of pure water.

Charles' law is defined as follows, and this is how we might express the equation for Charles' law: The initial volume and temperature, V1 and T1, are equal to V2 and T2, respectively.

Learn  more about gas law here:

https://brainly.com/question/28257995

#SPJ1

The element with electronic configuration 3s2 3p1  is aluminum and 2s2 2p5 is Florine.

Electronic configuration is defined as the distribution of electrons within an atom's orbitals. The atomic number, which is equal to the number of protons in every neutral atom, is the set quantity of electrons that make up each neutral atom.

Al has 13 electrons, which are organized as follows: 1s2 2s2 2p6 3s2 3p1. Al has an atomic number of 13. The structure 1s2 2s2 2p5 of fluorine, on the other hand, demonstrates that it has seven valence electrons. It belongs to the halogen family as a result.

Thus, the element with electronic configuration 3s2 3p1  is aluminum and 2s2 2p5 is Florine.

To learn more about electronic configuration, refer to the link below:

https://brainly.com/question/14283892

#SPJ1

The classifications of the substances are;

Atomic element - Ag

Molecular element - [tex]F_{2}[/tex]

Molecular compound - CO

Ionic compound - [tex]PbI_{4}[/tex]

We know that a compound can be obtained any time that there is a combination of the elements. As the elements are combined, we know that are able to know the sort of compound that can be formed.

If the compound that is formed is such that there are ions and the compound can be able to dissolve in solution, we say that the compound is ionic. If on the other hand, we have a compound that can not be dissolved in water and remains as a molecular without breaking up to form ions, we say that the compound is a molecular compound.

A molecular element has to do with a kind of molecule that is made up only one kind of element such as the molecules that involves the halogens.

Learn more about compounds:https://brainly.com/question/19458442

#SPJ1

The answer is CoA and 10μmol due to which additional CO₂ is produced.

Acetaldehyde is converted to ethanol with the help of the reaction catalyzed by alcohol dehydrogenase. This reaction results in the production of NAD+. The produced NAD+ is used to process the pyruvate dehydrogenase reaction, where additional CO₂ is also produced when pyruvate is converted to acetyl CoA.

10 μmol

10 micromoles of acetaldehyde are required to allow complete oxidation reaction of the pyruvate to 15μ moles of CO₂.

This above can be explained with the explanation that by adding additional alcohol dehydrogenase and its substrate we are actually allowing regeneration of NAD+. This is the reason why the presence of oxidized NAD+ the additional TCA reactions will take place and produces additional CO₂. So we will be getting 15 micromoles of pyruvate oxidized for 10 micromoles of acetaldehyde.

Learn more about TCA from the link given below.

https://brainly.com/question/29583788

#SPJ4

An organic reaction is classified into four types of addition, substitution, elimination and rearrangement.

The mechanism occurs through removing of leaving group.

The major product is in attached file below.

For more information about organic reaction please visit:

https://brainly.in/question/5765448

#SPJ4

1.81 is the pH of of CH3COOH with a concentration of 0.16 M

CH3COOH is the chemical formula of the acetic acid . acetic acid is also known as ethanoic acid systematically.

Given:

Ka of acetic acid=1.8*[tex]10^{-5}[/tex]

CH3COOH with a concentration of 0.16 M

To find :

the pH of CH3COOH with a concentration of 0.16 M

For that we use the Ostwald's dilution law equation i.e.

[H +]= [tex]\sqrt{C*K​}[/tex]

now after putting the values we get:

[H +]= [tex]\sqrt{0.16*1.8*10-5}[/tex] =7.2*10-6

now pH = −log[H+]

pH = −log[7.2*10-6]

pH = 1.81

hence, 1.81 is the pH of of CH3COOH with a concentration of 0.16 M

To know more about CH3COOH visit

https://brainly.com/question/13243508

#SPJ1

The pH of CH3COOH at a concentration of 0.16 M is 1.81.

Describe CH3COOH.

The acetic acid chemical formula is CH3COOH. Systematically, acetic acid is also referred to as ethanoic acid.

Given:

Acetic acid's KA is 1.8*.

a 0.16 M concentration of CH3COOH

Solution: Locate

the pH of CH3COOH at 0.16 M concentration

For that, we employ the equation for Ostwald's dilution law, i.e.

[H +]= [tex]\sqrt{C Ka}[/tex]

now that we've entered the values, we get:

[H +]= =7.2*10-6

pH now equals log[H+]

pH = −log[7.2*10-6]

pH = 1.81

Consequently, CH3COOH has a pH of 1.81 at 0.16 M of concentration.

To learn more about CH3COOH

brainly.com/question/13243508

#SPJ1

The stereoisomers are obtained only in the first and second part of the reactions whereas, the last two parts do not produce stereoisomers.

Pentene reacts with hydrogen halides to produce chlorophenothane. This reaction is known as an addition reaction, as the hydrogen halide molecules add to the double bond of the alkene to form a single bond. The products of this reaction are typically alkyl halides, where the hydrogen atom of the hydrogen halide is replaced by an alkyl group. Stereoisomer is formed in this reaction due to the chiral center.

In the second part When pentene reacts with water in the presence of H₂SO₄, an acid-catalyzed hydration reaction occurs. This reaction results in the formation of an alcohol product, which is formed by the addition of a hydroxyl group (-OH) to the carbon-carbon double bond in the alkene. Due to the presence of chiral center stereoisomer is observed.

In part C, the Treatment of 1-methylcyclopent-1-ene with methanol in the presence of acid yields 1-methoxy-1-methyl cyclopentane. Here, the product does not exhibit a chiral center, so no stereoisomers are formed.

In the last part, the Treatment of 2-methylbut-2-ene with HBr gives 2-bromo-2-methylbutane. Here, too the product does not contain a chiral center, so no stereoisomers are formed or observed.

The image attached explains the reaction in each part.

To know more about alkenes, click below:

https://brainly.com/question/10113466

#SPJ4

To increase the stability of their outer electron shells, atoms create chemical bonds. The kind of chemical connection selected maximizes the stability of the constituent atoms.

A non-metallic element is oxygen. A group-16 element is oxygen. The total number of electrons in the final orbit is the valence electron. The term "valence electrons of oxygen" refers to all of the electrons in the last shell following oxygen's electron configuration.The valence electrons control an element's characteristics and take role in bond formation. According to the oxygen electron configuration, the final oxygen shell has a total of six electrons.Valency is the capacity of one element's atom to combine with another atom during the creation of a molecule (valence).

Learn more about  valence electron Refer:brainly.com/question/28977387

#SPJ4

Answer:

0.67 moles of NH3 are required to react with 32.2 grams of O2.

Explanation:

To find the number of moles of NH3 required to react with 32.2 grams of O2, you will need to balance the chemical equation for the reaction and use the balanced equation to determine the mole ratio between the reactants.

The balanced equation for the reaction of NH3 with O2 is:

2 NH3 + 3 O2 -> 2 N2 + 6 H2O

From this equation, we can see that for every 2 moles of NH3 that react, 3 moles of O2 are also consumed. Therefore, the mole ratio between NH3 and O2 is 2:3.

Since we are given the mass of O2 in grams and we want to find the number of moles of NH3, we can use the molar mass of O2 to convert the mass to moles. The molar mass of O2 is 32.0 g/mol. Therefore, 32.2 grams of O2 is equivalent to 32.2 / 32.0 = 1.00625 moles of O2.

To find the number of moles of NH3 required, we can use the mole ratio to convert from moles of O2 to moles of NH3. Since the ratio is 2:3, we can multiply the number of moles of O2 by (2/3) to find the number of moles of NH3:

1.00625 moles O2 * (2 moles NH3 / 3 moles O2) = 0.67 moles NH3

This means that 0.67 moles of NH3 are required to react with 32.2 grams of O2.

The answer is 39.2%.

Solution:

[tex]Yield = \frac{Observed yield}{Theoritcal yield}*100[/tex]

= [tex]\frac{4.0}{10.2} *100[/tex]

= 39.2%.

Theoretical yields are calculated based on the stoichiometry of the chemical formula. Actual yield is determined experimentally. Percent yield is determined by calculating the ratio of actual yield to theoretical yield. how much usable product is obtained after processing; how much crude product is actually ordered.

However, in practice, the actual product yield is almost always lower than the theoretical yield. The actual yield is the amount of product actually obtained and the theoretical yield is the maximum possible yield. There are several reasons why percentage returns may not be 100%. This is because some other unexpected reaction occurred that did not produce the desired product.

Learn more about Theoretical yields here:- https://brainly.com/question/25996347

#SPJ4

Thee correct equation of the reaction is;[tex]TiO_{2} (s) + 2Cl_{2} (g) + 2C(s)------ > TiCl_{4} (g) + 2CO(g)[/tex]

We know that a chemical reaction is said to occur when there is a combination of one or more reactants and there is a new product that is formed in the process. We know that the formation of the new product would mean that there is the breaking of bonds in the reactants such that new bonds can be formed in the products.

We know that a chemical reaction is said to be balanced when the number of atoms of  each of the elements on the reactants side is equal to the number of atoms on the products side.

Here we are told that solid titanium dioxide is heated with chlorine gas in the presence of solid carbon as a reducing agent to form gaseous titanium IV chloride.

Learn more about chemical reaction:https://brainly.com/question/29039149

#SPJ1

The orbitals within a set of hybrid orbitals will have equivalent shape and energy. Thus, the option (c) is correct.

Atomic orbitals that are formed by the combination of the valence orbitals on an atom is known as hybrid atomic orbital. The hybrid orbitals that are formed have different energies and shapes compared to the atomic orbitals that combine to form the hybrid orbitals. Hybrid orbitals helps us in explaining the shapes of the molecules and other bonding properties.

The number of hybrid orbitals in a set is equal to the number of atomic orbitals that were combined to produce the set. All orbitals in a set of hybrid orbitals are equivalent in shape and energy.

Learn more about hybrid orbitals from the link given below.

https://brainly.com/question/16093015

#SPJ4

Answer:

proceed to the right, increasing the formation of product

The chemical that experiences E2 elimination just at quickest rate is represented by the best answer, h55172a.

For an E2 reaction to proceed, several conditions must be met: In the introduction of a base, secondary or tertiary alkyl halides may continue with E2 (OH-, RO-, R2N-) In order for that a double bonds to form during the reaction, both leaving groups must be on the same axis.

Here are a few E2 responses as examples. Alkenes are created by the removal of alkyl halides. Alkenes are created by the removal of alcohols. Take note that acid, not base, is used in the E2 clearance of an alcohol.

To know more about E2 elimination visit:

https://brainly.com/question/17055499

#SPJ4

The amount of the excess reactant that will remain if 16.0 g of solid iron reacts with 28.0 g of chlorine gas would be 1.68 grams.

Solid iron reacts with chlorine gas to produce iron chloride according to the following balanced equation:

[tex]2Fe + 3Cl_2 --- > 2FeCl_3[/tex]

From the balanced equation, the mole ratio of iron to chlorine gas is 2:3. This means that every 1 mole of iron requires 1.5 moles of chlorine gas for a complete reaction.

recall that: mole = mass/molar mass

16.0 g of solid iron is equivalent to:

16/56 = 0.29 mol

28.0 g of chlorine gas would be equivalent to:

28/71 = 0.39 mol

With 0.29 mol of solid iron, the equivalent amount of chlorine gas that would be required according to the balanced equation would be:

0.29 x 3/2 = 0.41 mol

But only 0.39 mol of chlorine gas is available. So, chlorine is the limiting reactant.

The actual amount of solid iron that will react with 0.38 mol of chlorine would be:

2/3 x 0.39 = 0.26 mol

Excess solid iron = 0.29 - 0.26

                            = 0.03 mol

Mass of 0.03 mol iron = 0.03 x 56 = 1.68 grams

Thus, the amount of excess iron that will remain once the reaction is complete would be 1.68 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/15047541

#SPJ1