Answer:
B)They are both types of energy.
Explanation:
Answer:
they both travel easily through wood
Explanation:
i don't want your rbx i just wanna help you:)
Hydrogen gas is trapped by water displacem ent in a test tube at 25 o C and left to sit until vapor -liquid equilibrium is reached. The total pressure of the trapped gas in th e test tube is 102.0 kPa. What pressure is exerted by the hydrogen gas that was trapped over water?
Answer:
Therefore, the pressure exerted by the hydrogen gas that was trapped over water is 108.8 kPa
Explanation:
The law of partial pressure by Dalton, in a mixture of gases which do not react chemically together, the total pressure is equal to the sum of the partial pressures of the individual gases.
According to this law, the total pressure exerted by the gases above the displaced water is equal to the sum of the partial pressure of water vapor and the partial pressure of hydrogen gas: Ptotal = pH₂ + pH₂O
Therefore, pH₂ = Ptotal - pH₂O
Vapor pressure of water at 37°C = 3.17 kPa; Ptotal = 102.0 kPa
pH₂ = (102.0 - 3.17) kPa
pH₂ = 98.8 kPa
Therefore, the pressure exerted by the hydrogen gas that was trapped over water is 108.8 kPa
EASY Chemical reactions
Balance and classify
Answer:
double replacement
synthesis
double replacement
i think this one is decomposition
synthesis
double replacement
single replacement
single replacement
double replacement
single replacement .....
hopefully i help
Get me the answers please
Answer:
a is a opinon answer
Explanation:
Answer:
a. opinion
Explanation:
formula for bleaching powder
Explanation:
calcium hypo chlorite
Ca(ClO)2
Explanation:
CA(CIO) IS RHE FORMULA FOR BLEACHING POWDER...
kindly mark as brainliest answerSelect the correct answer. When a candle burns, which forms of energy does the chemical energy in the candle change to?, A. light and sound, B. heat and sound, C. light and heat, D. electric and light answer?
Answer:
B heat
Explanation:
What is the chemical name of the compound K2SO4? Use the list of polyatomic ions and the periodic table to help you answer.
A. Dipotassium sulfate
B. Potassium sulfate
C. Potassium (||) sulfate
D. Potassium sulfide
Answer:
B. Potassium Sulfate
Explanation:
SO4=sulfate
-2 charge cancels
Answer:
B. Potassium Sulfate
Explanation: for clever users /plato
What is the mass of Li-6 or Li-7
Answer:
mass number- 7 (round it to 7
Explanation:
The item that is not normally used in preparing
a slide is
A. medicine dropper
B. scissors
C. slip cover
D vereis
Answer:
What is the name of the lab tool that is used to transfer a sample to a microscope slide?
A-a dropper
B-forceps
C-scissors
D-a ruler
Explanation:
got it wrong but this is the answer edg 2021
In the preparation of a microscopic slide, the items which are used are medicine dropper, scissors, and a slip cover. Thus, the correct option is D.
What is a microscopic slide?Microscope slides are made for the purpose of observations of different objects. After the observation, the slides are discarded. In most cases, the slides use a liquid mounting medium such as water or glycerin.
The procedure for the preparation of the slide is as follows:
1. Place a drop of liquid mounting medium in the center of the slide.
2. Position the sample on liquid with the use of tweezers.
3. At an angle, place one side of the cover slip against the microscopic slide making contact with outer edge of the liquid drop.
4. Lower the cover slip slowly, avoiding air bubbles.
5. Remove the excess water present in it with the help of paper towel.
Therefore, the correct option is D.
Learn more about Slide here:
https://brainly.com/question/20777311
#SPJ2
How many atoms of the element with atomic number 11 are in the reactants of the given formula?
2 NaCl + H2SO4 → 2 HCl + Na2SO4
The number of Na atoms in the reactants = 2
Further explanationEvery chemical reaction involves compounds that can act as reactants or products
The reactants will react to produce products
The reactants are usually written on the left side of the reaction, while the products on the right side of the reaction
Reaction
2 NaCl + H₂SO₄ → 2 HCl + Na₂SO₄
The element with atomic number 11 = Na(Natrium)
The number of atoms of the element that reacts or is produced can be seen from the reaction coefficient and the number of atoms in the compound
Na in NaCl = 1 atom
From equation, cofficient for NaCl = 2, so number of atoms of Na=2 x 1 = 2
name 3 collinear points
Answer:
These three points all lie on the same line. This line could be called 'Line AB', 'Line BA', 'Line AC', 'Line CA', 'Line BC', or 'LineCB' .
Convert each into decimal form. a) 1.056 x 10-3 b) 0.560 x 102
Answer:
A. 7.56
b. 57.12
Explanation:
Hope that's right have a nice day :)
12.3 moles of sodium is what mass of Na?
Answer:
1 mole of Na = mass of 22.99 g, 1 mole of Si = mass of 28.09 g.
Choose the correct one
Answer:
I believe it is 5 N to the right
Explanation:
How many moles are in a 24.022 g sample of Carbon (C)?
There are 2 moles in a 24.022 g sample of Carbon (C).
HOW TO CALCULATE NUMBER OF MOLES:
The number of moles of a substance can be calculated by dividing the mass of that substance by its molar mass. That is;no. of moles (mol) = mass (g) ÷ molar mass (g/mol)According to this question, a sample contains 24.022g of carbon.Molar mass of carbon = 12g/molno. of moles = 24.022g ÷ 12g/molno. of moles = 2.002Approximately, there are 2 moles in a 24.022 g sample of Carbon (C).Learn more at: https://brainly.com/question/20486415?referrer=searchResults
Order the following elements from Highest to Lowest Electronegativity.
K, Sc, Ca, Zn, Br
Sc, K, Br, Zn, Ca
OK, Ca, Sc, Zn, Br
O Br, Zn, Sc, Ca, K
Ca, Zn, Br, K, SC
Answer:
O, Ca, Zn, Br
Sc, K, Br,
Explanation:
The correct order of the chemical elements from highest to lowest electronegativity is: C. Br, Zn, Sc, Ca, K.
Electronegativity refers to a measure of the ability of an atom of a chemical element to attract any shared pair of electrons.
Generally, the electronegativity of a chemical element typically increases across the period from left to right.
In Chemistry, the electronegativity of some of the chemical element are:
Bromine (Br) = 2.96Calcium (Ca) = 1.0Zinc (Zn) = 1.65Potassium (k) = 0.82Scandium (Sc) = 1.36Hence, the order of the chemical elements from highest to lowest electronegativity is:
1. Bromine (Br) = 2.96
2. Zinc (Zn) = 1.65
3. Scandium (Sc) = 1.36
4. Calcium (Ca) = 1.0
5. Potassium (k) = 0.82
Read more: https://brainly.com/question/18214726
help please
manganese atom has 30 neutrons and atomic number 25
determine the electron cloud charge of manganese
Answer:
electron cloud charge of manganese=-5
Explanation:
atomic number=number of elecron +neutron number
DATA
Neutron NO.=30
atomic NO.=25
e=?
A=e+n
25=e+30
e=25-30
e= -5
PLEASE HELP ASAP
Which two reactions are slower than the others?
A. Silver tarnishes in air that contains hydrogen sulfide.
B. Lead nitrate and potassium iodide react to form a yellow
precipitate.
C. Black powder in fireworks burns explosively to produce white
light
D. Iron metal reacts with oxygen in air to form rust.
Answer:
A and D takes much slower
Explanation:
Here, we want to select, out of the four given reactions, the one that is slower than the other two
The answers in these case are reactions 1 and 4 ( A and D)
The two reactions show what is called rust (as directly seen in reaction 4)
When we speak of rust, we simply mean a reaction that occurs over time
For example, non coated roofings of houses doesn’t get to change color at an instant
The color degradation that occurs is something that takes some time from the initial time they were used to roof the house
Hence, from these analogy, we can see that these reactions need an an external support to thrive or to come into existence
These external supports are natural forces and they contributing efforts occur over time and cannot be seen immediately
These reactions are thus ones that take much slower time than conventional laboratory reactions in the case of the formation of the precipitate or a reaction that requires a low flash point temperature such as that of black powder to produce such explosive effects
So in conclusion, what we are saying is that the two selected reactions are subjected to the availability of some conditions and may take time to manifest and these absolutely differentiates them from reactions that are spontaneous such as the one having an explosive effect or the other one leading to the formation of a precipitate which takes far less times
which of the following is the correct formula formed from the following ions? Na, Cl
Answer:
NaCl
Explanation:
I'm not sure how to really explain this... it's NaCl though.
In 1945, the United States dropped an atomic bomb on the Japanese cities of Hiroshima and Nagasaki. This is an example of _______ negatively affecting history.
Scientific method
Expermentation
Science
Answer:
Science
Explanation:
How many particles would be found in a 12.7 g sample of ammonium carbonate?
Answer:
Answers. 7.8286×10²¹ particles.
Explanation:
The particles present in the sample of ammonium carbonate are [tex]0.7826*10^{23}[/tex] particles. This can be calculated by using number of moles.
Number of moles:It is defined as the given mass over molar mass.
Given mass= 12.7 g
Molar mass of ammonium carbonate= 96.06 g/mol
Number of moles = 12.7 g / 96.06 g/mol
Number of moles = 0.13 moles
One mole:
A mole is the amount (10) of material containing [tex]6.02214 * 10^{23}[/tex] particles.
1 mol = [tex]6.02214 * 10^{23}[/tex] particles
So, 0.13 moles = [tex]6.02214*10^{23}*0.13=0.7826*10^{23} \text{ particles}[/tex]
thus, there are [tex]0.7826*10^{23}[/tex] particles are present in 12.7 g of ammonium carbonate.
Find more information about One mole here:
brainly.com/question/1358482
EXPLAIN the steps you would take to complete this conversion problem.
46 lb
1.
Х
1kg
2.2 lb
х
1,000 g
1kg
=_?
~I love Kuroo^^~
Answer:
Next, the lb will be canceled at 2.2 lb and the kg would be canceled at 1 kg. You cross, multiply, then. 46 x 1 x 1000 is 46000, only moving to the decimal point. 1 x 2.2 x 1 will stay the same, so you'd have 46000 over 2.2.
Explanation:
kuroo man <3
Answer:
Next, the lb will be canceled at 2.2 lb and the kg would be canceled at 1 kg. You cross, multiply, then. 46 x 1 x 1000 is 46000, only moving to the decimal point. 1 x 2.2 x 1 will stay the same, so you'd have 46000 over 2.2.
Explanation:
halo
What is the value for AG at 100 K if AH = 27 kJ/mol and AS = 0.09 kJ/mol.K)?
O A. AG = 2700 kJ/mol
B. AG = -36 kJ/mol
C. AG = 0 kJ/mol
D. AG = 18 kJ/mol
The value for ΔG = 18 kJ/mol
Further explanationGiven
ΔH = 27 kJ/mol and ΔS = 0.09 kJ/mol.K
T = 100 K
Required
the value for ΔG
Solution
The spontaneous process of a reaction is based on 2 factors :
enthalpy change ΔH decreases and entropy change ΔS increasesΔG=ΔH-T.ΔS
[tex]\tt \Delta G=27~kJ/mol-100\times 0.09~kJ/mol.K\\\\\Delta G=18~kJ/mol[/tex]
a science fair volcano bubbles and fizzes. what is taking place?
A. solid formation
B. gas formation
C. color change
An object has a gravitational potential energy that is 800 Joules. Its
height above ground is 2.25 meters. What is its mass?
Answer:
36.28 kg
Explanation:
Given data:
Gravitational potential energy of object = 800 J
Height from ground = 2.245 m
Mass of object = ?
Solution:
Formula:
P.E = mgh
g =acceleration due to gravity = 9.8 m/s²
by putting values,
800 J = m× 9.8 m/s² ×2.25 m
J = kgm²/s²
800 kgm²/s² = m× 22.05 m²/s²
m = 800 kgm²/s² /22.05 m²/s²
m = 36.28 kg
Describe each of the 3 main
domains used to classify living
things.
Answer:
Organisms can be classified into one of three domains based on differences in the sequences of nucleotides in the cell's ribosomal RNAs (rRNA), the cell's membrane lipid structure, and its sensitivity to antibiotics. 3. The three domains are the Archaea, the Bacteria, and the Eukarya.
Explanation:
Which 1-mole sample of atoms requires the least energy to form a mole of positive ions? 1) Ca 2) Ge 3)K 4)Ga
Answer:
K potassium have least ionization energy among these four
Explanation:
Ionization energy values are given in kilo joule per mole
Ca 590
Ge 762
K 419
Ga 579
From above data we can understand stand K has least and Ge has highest ionization energy
What is the molecular formula of sodium peroxide by criss cross method
Answer:
Na2O2
the formula of sodium peroxide
A cross section of bone tissue is illustrated here. What statements accurately describe the cells shown here? You may select as many as are correct A) These cells form a type of connective tissue in the body B) This tissue can be found as compact on spongy in the body C) These cells have high concentrations of phosphate and calcium minerals D) The bone cells comprise a combination of nervous and muscular tissue in the body
Answer:
This question is incomplete
Explanation:
This question is incomplete because of the absence of the illustration (diagram or figure). However, general understanding of the bone cells can help answer the question.
Bone cells come together to form a connective tissue called bone. The bone is a connective tissue that contains cells and other substances. The bone assists in the storage of minerals, providing of support to the body, protecting internal organs and providing attachment for muscles and tendons. The bone can be either compact or spongy (cancellous). The spongy bone is lighter and less dense than the compact bone. The bone is primarily composed of a mineral called hydroxyapatite (made of calcium and phosphorus) but also contains other minerals (such as magnesium and sodium). Hence, the bone cells are also expected to have high concentration of the minerals of hydroxyapatite (calcium and phosphorus).
The bone cells cannot however comprise a combination of nervous and muscular tissue because a cell is the structural unit of life and cannot as such comprise of a higher structure. Thus, options A, B and C are correct.
manganese atom has 30 neutrons and atomic number 25
determine the electron cloud charge of manganese
Answer:
25
Explantion:
atomic no. = no. of eletron
How many moles of O, will occupy 1.00 L at a temper-
ature of -118°C and a pressure of 49.77 atm?
Moles of O₂ = 3.92
Further explanationGiven
V=1 L
T=-118 °C + 273 = 155 K
P = 49.77 atm
Required
moles of O₂
Solution
the gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm
V = volume, liter
n = number of moles
R = gas constant = 0.08206 L.atm / mol K
T = temperature, Kelvin
Input the value :
n= PV/RT
[tex]\tt n=\dfrac{49.77~atm\times 1~L}{0.082\times 155}=3.92~moles[/tex]