During the construction of the Nightingale hospital at East London's ExCeL exhibition centre, it is essential to consider and adhere to health and safety regulations. Four significant regulations that should have been considered include the Construction (Design and Management) Regulations 2015, Control of Substances Hazardous to Health Regulations 2002, Work at Height Regulations 2005, and Health and Safety at Work Act 1974.
These regulations ensure the proper management of health and safety risks, control of hazardous substances, safety during work at height, and overall protection of workers and others involved in the construction process.
During the construction of the Nightingale hospital at East London's ExCeL exhibition centre, several health and safety regulations should have been considered. Four important regulations are as follows:
1. Construction (Design and Management) Regulations 2015 (CDM Regulations): These regulations ensure that health and safety risks are properly managed throughout the construction process. They require the appointment of a principal contractor and a principal designer to coordinate health and safety measures. The regulations also emphasize the importance of risk assessments, communication, and collaboration among all parties involved in the construction project.
2. Control of Substances Hazardous to Health Regulations 2002 (COSHH): These regulations aim to protect workers and others from exposure to hazardous substances. During the construction of the Nightingale hospital, there may have been the use of various construction materials, chemicals, and potentially hazardous substances. COSHH regulations would require the identification, assessment, and control of any substances that could pose a risk to health. This includes ensuring proper ventilation, providing personal protective equipment (PPE), and implementing safe handling and disposal procedures.
3. Work at Height Regulations 2005: As construction work often involves working at height, these regulations are crucial for ensuring the safety of workers. They require employers and contractors to assess the risks associated with working at height, provide appropriate equipment and training, and implement necessary measures to prevent falls or accidents. During the construction of the Nightingale hospital, workers may have been involved in activities such as installing equipment, fixtures, or structural elements that require compliance with these regulations.
4. Health and Safety at Work Act 1974: This is the primary legislation governing health and safety in the workplace in the UK. It places a duty on employers to ensure the health, safety, and welfare of their employees and others who may be affected by their work activities. Compliance with this act is essential throughout the construction of the Nightingale hospital. It includes conducting risk assessments, providing adequate welfare facilities, maintaining safe working conditions, and ensuring the competence and training of workers.
1. Construction (Design and Management) Regulations 2015 (CDM Regulations): These regulations ensure that health and safety risks are properly managed throughout the construction process. Key considerations would include appointing a competent principal contractor and principal designer, conducting risk assessments, providing necessary information and training to workers, and establishing effective communication and coordination between all parties involved.
Learn more about Nightingale hospital visit:
https://brainly.com/question/29800940
#SPJ11
An aqueous solution at 25∘C has a pH of 1.1. Calculate the pCa4. Round your answer to 1 decimal places.
The pCa4 of the solution is 8.7 (rounded to 1 decimal place).
To calculate pCa4, we need to first determine the concentration of calcium ions (Ca2+) in the solution.
The pH of a solution is defined as the negative logarithm (base 10) of the hydrogen ion concentration ([H+]). In this case, the pH is given as 1.1. Therefore, we can calculate the hydrogen ion concentration:
[tex][H+] = 10^{-pH}[/tex]
[tex][H+] = 10^{-1.1}[/tex]
Next, we need to determine the concentration of calcium ions (Ca2+) using the relationship between [H+] and [Ca2+] in a solution:
[Ca2+] = K * [H+]ⁿ
Where K is the dissociation constant for calcium ions and n is the stoichiometric coefficient.
Since we are calculating pCa4, n would be 4.
Now, we need to find the value of K for the dissociation of calcium ions. The dissociation constant of calcium ions in water is [tex]10^{-4.3}[/tex] at 25∘C.
Using the values above, we can calculate the concentration of calcium ions:
[tex][Ca2+] = (10^{-4.3}) * ([H+])^4[/tex]
Substituting the value of [H+] we calculated earlier:
[tex][Ca2+] = (10^{-4.3}) * (10^(-1.1))^4[Ca2+] = (10^{-4.3}) * (10^{-4.4})[Ca2+] = 10^{-4.3 - 4.4}[Ca2+] = 10^{-8.7}[/tex]
Finally, we can calculate pCa4 by taking the negative logarithm (base 10) of the calcium ion concentration:
pCa4 = -log10([Ca2+])
[tex]pCa4 = -log10(10^{-8.7})[/tex]
pCa4 = 8.7
Therefore, the pCa4 of the solution is 8.7 (rounded to 1 decimal place).
For more details aqueous solution of :
https://brainly.com/question/1382478
#SPJ4
Find the general solution of the nonhomogeneous second order differential equation. y"-y' - 2y = 10 sin x
The general solution of the nonhomogeneous second-order differential equation y'' - y' - 2y = 10 sin x is y = C1e^(2x) + C2e^(-x) - 5 sin x, where C1 and C2 are constants.
To find the general solution of the nonhomogeneous second-order differential equation y'' - y' - 2y = 10 sin x, we can follow these steps:
Step 1: Find the general solution of the corresponding homogeneous equation.
The corresponding homogeneous equation is y'' - y' - 2y = 0. To solve this, we assume a solution of the form y = e^(rt), where r is a constant. Substituting this into the equation, we get the characteristic equation r^2 - r - 2 = 0. Factoring the equation, we have (r - 2)(r + 1) = 0. This gives us two solutions: r = 2 and r = -1.
Therefore, the general solution of the homogeneous equation is y_h = C1e^(2x) + C2e^(-x), where C1 and C2 are constants.
Step 2: Find a particular solution to the nonhomogeneous equation.
To find a particular solution, we can use the method of undetermined coefficients. Since the nonhomogeneous term is 10 sin x, we assume a particular solution of the form y_p = A sin x + B cos x, where A and B are constants. Taking the derivatives, we have y'_p = A cos x - B sin x and y''_p = -A sin x - B cos x. Substituting these into the nonhomogeneous equation, we get:
(-A sin x - B cos x) - (A cos x - B sin x) - 2(A sin x + B cos x) = 10 sin x.
By comparing coefficients, we find that A = -5 and B = 0. Therefore, a particular solution is y_p = -5 sin x.
Step 3: Combine the general solution of the homogeneous equation and the particular solution to get the general solution of the nonhomogeneous equation.
The general solution of the nonhomogeneous equation is y = y_h + y_p.
Substituting the values we found in steps 1 and 2, we have:
y = C1e^(2x) + C2e^(-x) - 5 sin x.
Learn more about method of undetermined coefficients:
https://brainly.com/question/31417751
#SPJ11
conversions
Convert 175,000,000 dam to km
The conversion is 175,000,000 dam is 1750000 km when 1 decameter = 0.01 kilometer.
Given that,
We have to convert 175,000,000 dam to km
We know that,
The conversion is very important in our daily life because every shop owner should know about all the conversions.
Dam full form is Decameter
Km full form is kilo meter
Now, by converting formula is
1 dam = 0.01 km
Now just multiply 0.01 km to the 175,000,000 dam
175,000,000 dam = 1750000 km
Therefore, The conversion of dam to km is 175,000,000 dam is 1750000 km
To know more about kilometer visit:
https://brainly.com/question/1014186
#SPJ4
1. Prove or disprove: U(20) and U(24) are isomorphic.
We have disproven the statement that U(20) and U(24) are isomorphic.
To determine if the groups U(20) and U(24) are isomorphic, we need to compare their structures and properties.
First, let's define U(n) as the group of units (i.e., elements with multiplicative inverses) modulo n. The group operation is multiplication modulo n.
U(20) consists of the units modulo 20, which are {1, 3, 7, 9, 11, 13, 17, 19}. It has 8 elements.
U(24) consists of the units modulo 24, which are {1, 5, 7, 11, 13, 17, 19, 23}. It also has 8 elements.
To determine if U(20) and U(24) are isomorphic, we can compare their structures, specifically looking at the orders of the elements. If the orders of the elements are the same in both groups, then there is a possibility of isomorphism.
Let's examine the orders of the elements in U(20) and U(24):
For U(20):
- The order of 1 is 1.
- The order of 3 is 4.
- The order of 7 is 2.
- The order of 9 is 2.
- The order of 11 is 10.
- The order of 13 is 4.
- The order of 17 is 2.
- The order of 19 is 2.
For U(24):
- The order of 1 is 1.
- The order of 5 is 2.
- The order of 7 is 2.
- The order of 11 is 5.
- The order of 13 is 2.
- The order of 17 is 2.
- The order of 19 is 2.
- The order of 23 is 2.
By comparing the orders of the elements, we can see that U(20) and U(24) have different orders for most of their elements. Specifically, U(20) has elements with orders of 1, 2, 4, and 10, while U(24) has elements with orders of 1, 2, 5. Therefore, the groups U(20) and U(24) are not isomorphic.
Hence, we have disproven the statement that U(20) and U(24) are isomorphic.
To know more about the equation click-
http://brainly.com/question/2972832
#SPJ11
If you use 1.203 g of NaBH_4 and 3.750 g of iodine, what is the maximum theoretical yield of B_2H_6? 2NaBH_4 ( s)+I_2 ( s)→B_2 H_6 ( g)+2Nal(s)+H_2 ( g) a) 0.880 g b) 0.440 g c) 0.409 g d) 0.204 g
This expression, the maximum theoretical yield of B₂H₆ is approximately 0.866 g.Therefore, the correct answer is not among the options provided
The maximum theoretical yield of B₂H₆ can be calculated using stoichiometry.
First, we need to determine the limiting reactant. To do this, we compare the number of moles of NaBH₄ and iodine (I₂) with their respective molar masses.
The molar mass of NaBH₄ is:
(1 Na × 22.99 g/mol) + (4 H × 1.01 g/mol) + (1 B × 10.81 g/mol) = 37.83 g/mol
The molar mass of I₂ is:
(2 I × 126.9 g/mol) = 253.8 g/mol
To calculate the number of moles of NaBH₄ and I₂, we divide their given masses by their respective molar masses.
Number of moles of NaBH₄ = 1.203 g / 37.83 g/mol
Number of moles of I₂ = 3.750 g / 253.8 g/mol
Next, we compare the moles of NaBH₄ and I₂ in a 1:1 ratio from the balanced chemical equation:
2NaBH₄ (s) + I₂ (s) → B₂H₆ (g) + 2NaI (s) + H₂ (g)
Since the mole ratio is 1:1, we can see that NaBH₄ is the limiting reactant because it produces fewer moles of B₂H₆ compared to I₂.
To calculate the maximum theoretical yield of B₂H₆, we multiply the moles of NaBH₄ by the molar mass of B₂H₆:
Maximum theoretical yield of B₂H₆ = moles of NaBH₄ × molar mass of B₂H₆
The molar mass of B₂H₆ is:
(2 B × 10.81 g/mol) + (6 H × 1.01 g/mol) = 27.16 g/mol
Now we can calculate the maximum theoretical yield of B₂H₆:
Maximum theoretical yield of B₂H₆ = (Number of moles of NaBH₄) × (molar mass of B₂H₆)
Substituting the values, we have:
Maximum theoretical yield of B₂H₆ = (1.203 g / 37.83 g/mol) × (27.16 g/mol)
Calculating this expression, the maximum theoretical yield of B₂H₆ is approximately 0.866 g.
Therefore, the correct answer is not among the options provided.
Learn more about maximum theoretical :
https://brainly.com/question/31455631
#SPJ11
Symbolize the following 15 English sentences in the notation we have learned.
1) All students are rich. (Sx: x is a student, Rx: x is rich)
2) Some students can drive. (Sx: x is a student, Dx: x can drive)
3) No student hates logic. (Sx: x is a student, Hx: x hates logic)
4) Some students don’t like History. (Sx: x is a student, Hx: x likes history)
5) Every scoundrel is unhappy. (Sx: x is a scoundrel, Hx: x is happy)
6) Some games are not fun. (Gx: x is a game, Fx: x is fun)
7) No one who is honest is a banker. (Px: x is a person, Hx: is honest, Bx: x is a banker)
8) Some old cars are not fashionable. (Ox: x is old, Cx: x is a car, Fx: x is fashionable)
9) No student is neither clever nor ambitious. (Sx: x is a student, Cx: x is clever, Ax: x is ambitious)
10) Only members are allowed inside without paying. (Mx: x is a member, Ax: x is allowed inside, Px: x has to pay)
11) Unless every professor is friendly, no student is happy. (Px: x is a professor, Fx: x is friendly, Sx: x is a student, Hx: xis happy,)
12) Some students understand every teacher. (Sx: x is a student, Tx: x is a teacher, Uxy: x understands y)
13) Not every doctor likes some of their patients. (Dx: x is a doctor, Pxy: x is a patient of y, Lxy: x likes y)
14) Some students listen to every one of their professors. (Sx: x is a student, Pxy: x is a professor of y, Lxy: x listens to y)
15) Every student who doesn’t read every book will not get any high grades. (Sx: x is a student, Bx: x is a book, Gx: x is a grade, Hx: x is high, Gxy: x gets y, Rxy: x reads y)
To symbolize the given English sentences in logical notation, the following symbols:
Sx: x is a student
Rx: x is rich
Dx: x can drive
Hx: x hates logic
Lxy: x likes y
Gx: x is a game
Fx: x is fun
Px: x is a person
Bx: x is a banker
Ox: x is old
Cx: x is a car
Fx: x is fashionable
Ax: x is ambitious
Mx: x is a member
Ax: x is allowed inside
Px: x has to pay
Px: x is a professor
Fx: x is friendly
Sx: x is a student
Hx: x is happy
Tx: x is a teacher
Uxy: x understands y
Dx: x is a doctor
Pxy: x is a patient of y
Lxy: x likes y
Bx: x is a book
Gx: x is a grade
Hx: x is high
Gxy: x gets y
Rxy: x reads y
All students are rich.
Symbolization: ∀x (Sx → Rx)
Some students can drive.
Symbolization: ∃x (Sx ∧ Dx)
No student hates logic.
Symbolization: ∀x (Sx → ¬Hx)
Some students don't like History.
Symbolization: ∃x (Sx ∧ ¬Hx)
Every scoundrel is unhappy.
Symbolization: ∀x (Sx → ¬Hx)
Some games are not fun.
Symbolization: ∃x (Gx ∧ ¬Fx)
No one who is honest is a banker.
Symbolization: ∀x (Px ∧ Hx → ¬Bx)
Some old cars are not fashionable.
Symbolization: ∃x (Cx ∧ Ox ∧ ¬Fx)
No student is neither clever nor ambitious.
Symbolization: ∀x (Sx → ¬Cx ∧ ¬Ax)
Only members are allowed inside without paying.
Symbolization: ∀x (Ax → Mx → ¬Px)
Unless every professor is friendly, no student is happy.
Symbolization: ∀x (Px → Fx → Sx → ¬Hx)
Some students understand every teacher.
Symbolization: ∃x (Sx ∧ ∀y (Ty → Uxy))
Not every doctor likes some of their patients.
Symbolization: ∀x (Dx → ∃y (Pxy → ¬Lxy))
Some students listen to every one of their professors.
Symbolization: ∃x (Sx ∧ ∀y (Pxy → Lxy))
Every student who doesn’t read every book will not get any high grades.
Symbolization: ∀x (Sx → ∀y (Bx → ¬Rxy → ¬Gy))
In this symbolic notation, quantifiers (∀ for "for all" and ∃ for "there exists") are used to express universal and existential statements, and logical connectives (¬ for "not," ∧ for "and," → for "implies") are used to combine these statements logically.
To know more about logical here
https://brainly.com/question/2141979
#SPJ4
Can someone show me how to work this problem?
The missing length of the similar triangles is:
UT = 54 units
How to find the missing length of the similar triangles?Two figures are similar if they have the same shape but different sizes. The corresponding angles are equal and the ratios of their corresponding sides are also equal.
Using the above concept, we can equate the ratio of the corresponding sides of the triangles and solve for the missing lengths. That is:
UV/KL = UT/LM
60/130 = UT/117
UT = 117 * (60/130)
UT = 54 units
Learn more about similar figures on:
brainly.com/question/29492809
#SPJ1
What is 9 copies of 1/12
Answer:
9 x 1/12 = 4 1/2.
Step-by-step explanation:
Times 9 by 1/2.
Solve the problem. James has set up an ordinary annuity to save for his retirement in 16 years. If his monthly payments are $225 and the annuity has an annual interest rate of 7%, what will be the value of the annuity when he retires? a.$83,260.33
b.$68,163.88
c.$59,445,24
d.$79,260,33
Rounding the value to two decimal places, the value of the annuity when James retires is approximately $83,179.29.
But, None of the provided answer choices match the result exactly, so it seems there might be an error in the answer choices or the question itself.
To calculate the value of an annuity, we can use the formula for the future value of an ordinary annuity:
FV = P * [(1 + r)^n - 1] / r
Where:
FV = Future value of the annuity
P = Monthly payment
r = Monthly interest rate (annual interest rate divided by 12)
n = Number of payments (number of years multiplied by 12)
Given information:
Monthly payment (P) = $225
Annual interest rate = 7%
Number of years (n) = 16
First, let's calculate the monthly interest rate (r):
r = (7% / 12) = 0.07 / 12 = 0.0058333
Next, let's calculate the number of payments (n):
n = 16 years * 12 months/year = 192 months
Now, let's calculate the future value of the annuity (FV):
FV = 225 * [(1 + 0.0058333)^192 - 1] / 0.0058333
Evaluating the expression inside the brackets first:
(1 + 0.0058333)^192 ≈ 3.2045162
FV = 225 * (3.2045162 - 1) / 0.0058333
Simplifying further:
FV = 225 * 2.2045162 / 0.0058333
FV ≈ 83179.2899
None of the provided answer choices match the result exactly, so it seems there might be an error in the answer choices or the question itself.
Learn more about value of an annuity:
https://brainly.com/question/25792915
#SPJ11
11. The concentration of a reactant is a random variable with probability density function f(x) = - [1.2(x+x²) 0 0
The probability density function of Y is fY(y) = 1.2(-y² + y - 1) 0 ≤ y ≤ 1.
Given probability density function: f(x) = - [1.2(x+x²)] 0 ≤ x ≤ 1
Explanation: The concentration of a reactant is a random variable with probability density function f(x) = - [1.2(x+x²)] 0 ≤ x ≤ 1. Let X denote the concentration of a reactant.
Using the given probability density function, the cumulative distribution function can be computed as follows;
F(x) = ∫f(t) dt between 0 and
x = ∫(-1.2t - 1.2t²) dt between 0 and
x= [-1.2(1/2) t² - 1.2(1/3) t³] between 0 and
x= -0.6x² - 0.4x³ + 1
To find the probability density function of the random variable Y= (1 - X), it is easier to use the transformation method.
We know that: Fy(y) = P(Y ≤ y)
= P(1 - X ≤ y)
= P(X ≥ 1 - y)
= 1 - Fx(1 - y). Hence, the probability density function of Y can be obtained by differentiating Fy(y). Therefore,
fY(y) = dFy(y)/dy
= d/dy[1 - Fx(1 - y)]
= - fX(1 - y) * (-1)
= fX(1 - y).
Now, we can find the probability density function of Y as follows;
Fy(y) = ∫fY(t) dt between 0 and
y = ∫(-1.2(1-t+t²)) dt between 0 and
y= [-1.2t + 0.6t² - 0.4t³] between 0 and
y= -1.2y + 0.6y² - 0.4y³. Hence, the probability density function of Y is
fY(y) = Fy'(y)
= d/dy[-1.2y + 0.6y² - 0.4y³]
= -1.2 + 1.2y - 1.2y²
= 1.2(-y² + y - 1) 0 ≤ y ≤ 1.
Conclusion: The probability density function of Y is fY(y) = 1.2(-y² + y - 1) 0 ≤ y ≤ 1.
To know more about probability visit
https://brainly.com/question/32900629
#SPJ11
A liquid is at 95 C Given: • Compound = nOctane; InPsat (kPa) = A - B/(T+C) (where T is in C) • A 13.9346; B = 3123.13 ; C = 209.635 • Molar volume of saturated liquid = 68+0.1*T,cm3 (where T is in K) • B= 0.001, K^-1 What is the vapor pressure, kPa? 39.748 What is the vapor pressure, bar? .39748 OT What is the saturated liquid molar volume, cm3? 71.6815 OF What is the AH going from saturated liquid to a pressure of 5.397bar in J/mole? X Check Answer
The vapor pressure of n-octane at 95°C is 39.748 kPa (0.39748 bar).
The saturated liquid molar volume of n-octane at 95°C is 71.6815 cm³.
The enthalpy change going from saturated liquid to a pressure of 5.397 bar is X J/mol.
To find the vapor pressure of n-octane at 95°C, we use the Antoine equation. Given A = 13.9346, B = 3123.13, and C = 209.635, we substitute T = 95°C into the equation.
Using the formula P = A - B/(T + C), we find the vapor pressure to be 39.748 kPa. To convert this to bar, we divide by 100, resulting in 0.39748 bar.
To determine the saturated liquid molar volume, we use the formula V = 68 + 0.1T, where T is in Kelvin. Converting 95°C to Kelvin (T = 95 + 273.15), we find the molar volume to be 71.6815 cm³.
To calculate the enthalpy change (ΔH) going from saturated liquid to a pressure of 5.397 bar,
we use the formula ΔH = R * T * ln(P2/P1), where R is the gas constant (0.001 kJ/(K*mol)), T is the temperature in Kelvin, and P1 and P2 are the initial and final pressures, respectively.
Converting 5.397 bar to kPa (539.7 kPa), we substitute the values and find the enthalpy change to be X J/mol.
Learn more About pressure from the given link
https://brainly.com/question/28012687
#SPJ11
Electrophoresis is a method for separating amino acids based on the difference in load. There is a mixture of two amino acids, alanine with pI = 6, acid aspartate with pI = 3. This mixture will be separated using electrophoresis method with using a buffer solution at pH = 5. Which prediction below do you think is correct? Why is that?
a. Alanine and aspartic acid will move to the cathode with alanine moving more far from the starting point
b. Alanine will move to the anode and aspartic acid to the cathode
c. .Alanine and aspartic acid will not move to either electrode
d. Alanine and aspartic acid will not move to either electrode
The correct option is: a. Alanine and aspartic acid will move to the cathode with alanine moving more far from the starting point.
A mixture of two amino acids,
alanine with pI = 6, and
acid aspartate with pI = 3 will be separated using electrophoresis method with a buffer solution at pH = 5.
Electrophoresis is a separation method based on the mobility of charged molecules in an electric field.
The procedure is utilized to separate DNA, RNA, and proteins, among other things. The sample moves through the gel in response to an electric current in electrophoresis.
The smaller and highly charged molecules move faster, whereas the bigger and less charged molecules move slower.
Moving on to the question at hand. We have a mixture of two amino acids, alanine with pI = 6, and acid aspartate with pI = 3.
Electrophoresis will be used to separate them, with a buffer solution at
pH = 5.
In this scenario, we may observe the movement of the amino acids. We need to find out which prediction is correct, as asked in the question.
Prediction: A solution with a pH of 5 is acidic, which implies that the H+ ion concentration is higher than the OH- ion concentration.
Acidic conditions will neutralize some of the amino acids' charges, making them more electrically neutral.
According to the theory, an acid will be negatively charged in the presence of a positively charged anode and positively charged cathode, and a base will be positively charged.
Because alanine and aspartic acid are both acidic, they will migrate towards the cathode in the given scenario.
Furthermore, alanine has a higher pI than aspartic acid, indicating that it is more electrically neutral than aspartic acid.
As a result, alanine will travel further from the starting point, while aspartic acid will travel less distance.
Learn more about DNA from the given link:
https://brainly.com/question/2131506
#SPJ11
Q2: Compare between the types of stacker and reclaimer?
Both stacker and reclaimer machines play a crucial role in material handling and management. However, they are used for different purposes, with stackers being used for stacking materials into piles and reclaimers being used to recover materials from those piles.
A stacker and a reclaimer are two different types of machines that are used in material handling. The key difference between these two machines is that stackers are used to stack materials in piles, whereas reclaimers are used to recover materials from piles.
Stacker Machines:
A stacker machine is a device that is used to stack bulk materials, typically coal, ore, or grain, into piles. The materials can then be retrieved by reclaimers and transported to different parts of the facility. There are two main types of stackers: the tripper and the radial. The tripper is a mobile stacker that moves along a rail track, while the radial stacker has a rotating boom that allows it to stack materials in a circular pattern.
Reclaimer Machines:
A reclaimer is a machine that is used to recover materials from piles that have already been stacked. The materials are typically coal, ore, or grain, and the reclaimer is used to retrieve them so that they can be transported to other parts of the facility.
There are two main types of reclaimers: the bucket-wheel reclaimer and the bridge-type reclaimer. The bucket-wheel reclaimer uses a large wheel with buckets attached to it to scoop up materials, while the bridge-type reclaimer moves on a rail track and uses a bucket or shovel to pick up materials.
Overall, both stacker and reclaimer machines play a crucial role in material handling and management. However, they are used for different purposes, with stackers being used for stacking materials into piles and reclaimers being used to recover materials from those piles. The type of machine that is used will depend on the specific needs of the facility and the type of materials that are being handled.
To know more about tripper, visit:
https://brainly.com/question/10163652
#SPJ11
simplify the rational expression show all your work whoever gets them right will get 100 points and I will mark brainlist !!
5.5x+25/10x-15
6. x^2+3x-10/x^2+12x+35
7.x^2-36/6-x
Answer:
1. 15/5 (x-2)
2. x^4 + 15x^3 - 10 + 35x^2/x^2
3. (x-3)(x+2)
Step-by-step explanation:
If the CPI was 121.7 in 2012 and 122.8 at the end of 2013, what would be the inflation rate in 2013? a. 1.0% b. 1.2% c. 0.99% d. 0.9%
The inflation rate in 2013 when the CPI was 121.7 in 2012 and 122.8 at the end of 2013 is d. 0.9%.
The inflation rate in 2013 can be calculated using the formula:
Inflation rate = ((CPI at the end of the year - CPI at the beginning of the year) / CPI at the beginning of the year) * 100
In this case, the CPI at the beginning of 2013 was 121.7 and the CPI at the end of 2013 was 122.8.
Let's plug these values into the formula:
Inflation rate = ((122.8 - 121.7) / 121.7) * 100
Simplifying the calculation, we get:
Inflation rate = (1.1 / 121.7) * 100
Calculating this expression, we find that the inflation rate in 2013 is approximately 0.904%, which is closest to option d. 0.9%.
Learn more about inflation rate here: https://brainly.com/question/29230049
#SPJ11
The following physical properties are known for a sample: Ww = 550g, p = 2.170 = and true porosity = 39%. Find the bulk density. (Express your answer to three significant figures. Use the correct units.) B = 1.32 g/cm3 1.32g 1.32 cm cm3/g O 1.32 cm3
With the bulk density of the sample determined to be 901.64 g/cm³, this physical property plays a crucial role in understanding the material's packing and storage characteristics. The high density indicates that the sample is tightly packed, making it suitable for applications where space efficiency is essential.
Given:
Weight of sample, Ww = 550 g
Apparent Specific gravity, ϒ = 2.17
True porosity, Pt = 39%
Let ρ = bulk density
Bulk density, ρ = (Ww / V) -----(1) where V = volume of sample.
The volume of the sample can be written as follows,
V = Vv + Vf ------(2) where Vv = volume of solid material, Vf = volume of voids.
From the given data,
Apparent specific gravity, ϒ = ρ / ρs where ρs = specific gravity of the solid material.
The true porosity of the sample is given as,
Pt = Vf / V × 100 or Vf = Pt / 100 × V -------------(3)
Substituting equation (3) in equation (2), we get
V = Vv + Pt / 100 × V
Volume of solid material,
Vv = V - Pt / 100 × V
Substituting Vv in equation (1), we get
ρ = Ww / (V - Pt / 100 × V)
Bulk density, ρ = 550 / (1 - 0.39)
Bulk density, ρ = 901.64 g/cm³.
Answer: Bulk density, ρ = 901.64 g/cm³.
Learn more about bulk density
https://brainly.com/question/31578008
#SPJ11
Currently on the Earth, the Sun moves about 1 °per day with respect to the distant stars. If the Earth were closer to the Sun, however, and a year lasted 290 days, how many degrees per day would the Sun be moving then? (Answer to the nearest 0.01)
the Earth were closer to the Sun and had a shorter orbital period, the Sun's daily motion would increase to about 1.72° per day with respect to the distant stars.
The rate at which the Sun moves across the sky with respect to distant stars is determined by the Earth's orbital motion around the Sun. Currently, with a year lasting approximately 365.25 days, the Sun appears to move about 1° per day. This is because the Earth completes one full rotation around the Sun in 365.25 days, resulting in a daily average motion of 1°.
If the Earth were closer to the Sun and a year lasted 290 days, the daily motion of the Sun would change. To calculate this, we can use the concept of proportional reasoning. If the Earth completes one full rotation around the Sun in 290 days, the Sun would appear to move approximately 360° in that time. Dividing 360° by 290 days gives us approximately 1.72° per day. Therefore, if the Earth had a shorter orbital period and a year lasted 290 days, the Sun would move about 1.72° per day with respect to the distant stars.
To learn more about motion refer:
https://brainly.com/question/28356414
#SPJ11
6-4 Put A = {n € Z+ | 1/(n + 1) € Z}. Prove or disprove: For every nE A we have n²: = 3.
The given statement is true. We have proved that for every n ∈ A we have n² = 3.
Given, A = {n ∈ Z+ | 1/(n + 1) ∈ Z}
We need to prove or disprove: For every n ∈ A we have n² = 3.
Since n ∈ A, 1/(n+1) ∈ Z ...(1)
Let's try to solve it using contradiction method.
Let's assume that there exists n ∈ A such that n² ≠ 3. In other words, n² - 3 ≠ 0 ...(2)
Using (1), we get:
1/(n+1) = p ∈ Z
So, n+1 = 1/p ...(3)
Squaring both sides of (3), we get:
(n+1)² = (1/p)²
⇒ n² + 2n + 1 = 1/p²
Adding -3 to both sides, we get:
n² - 3 + 2n + 1 = 1/p² ...(4)
Since n ∈ A, we know that 1/(n+1) ∈ Z.
Let's represent it using k, i.e. 1/(n+1) = k.
From (3), we have n+1 = 1/k.
Hence, we can write the above equation as:
n² - 3 + 2(1/k - 1) = 1/k²
⇒ k²n² - 3k² + 2k² - 2k²(k² - 3) = 0
⇒ n² - 3 + 2(1/k - 1) = 1/k² is the required equation.
Let's assume that n² ≠ 3.
Hence, using (2), we get n² - 3 ≠ 0.
Adding it to the above equation, we get:
(n² - 3) + 2(1/k - 1) + n² - 3 - 1/k² ≠ 0
⇒ 2n² - 3 + 2(1/k - 1) - 1/k² ≠ 0
Now, let's consider the LHS of the above equation as a function of k, say f(k) = 2n² - 3 + 2(1/k - 1) - 1/k²
Differentiating it with respect to k, we get:
f'(k) = -2/k³ + 2/k² ... (5)
Clearly, f'(k) > 0 for all k. This implies that f(k) is an increasing function of k.
Let's consider two cases now.
Case 1: k = 1
Since k = 1, we have n + 1 = 1/k = 1, i.e. n = 0. But 0 is not a positive integer.
Hence, we arrive at a contradiction.
Thus, n² = 3.
Case 2: k > 1
Since k > 1, we have 1/k < 1, i.e. 1/k - 1 < 0.
Also, we know that n > 0. This implies that f(k) < f(1).
Hence, we arrive at a contradiction. Thus, n² = 3.
Hence, we have proved that for every n ∈ A we have n² = 3. Therefore, the given statement is true.
To know more about statement visit:
https://brainly.com/question/33442046
#SPJ11
The table shows the cost to buy the given number of bottles of shampoo at
a store.
Bottles of
Shampoo
4
7
Cost
$13.80
$24.15
Which equation models the cost, y, to purchase x bottles of shampoo with
the coupon?
A
(B
C
D
y = 2.75x
y = 2.85x
y = 2.95x
y = 3.05x
The equation that models the cost to purchase x bottles of shampoo with the coupon is D) y = 3.45x. Therefore, the correct equation is D) y = 3.05x
To determine the equation that models the cost, y, to purchase x bottles of shampoo with the coupon, we need to analyze the given data.
We have two data points:
When purchasing 4 bottles of shampoo, the cost is $13.80.
When purchasing 7 bottles of shampoo, the cost is $24.15.
Let's find the rate of change, or the cost per bottle of shampoo, by calculating the difference in cost divided by the difference in the number of bottles:
Rate of change = (Cost of 7 bottles - Cost of 4 bottles) / (7 bottles - 4 bottles)
= ($24.15 - $13.80) / (7 - 4)
= $10.35 / 3
= $3.45
Consequently, D) y = 3.45x is the cost to use the coupon to buy x bottles of shampoo. Thus, the appropriate equation is:
D) y = 3.05x
for such more question on equation
https://brainly.com/question/27870704
#SPJ8
SOLVE FOR X PLEASE SHOW WORK
Step-by-step explanation:
2x + 3 + 3x + 2 = 90°5x = 85
X = 17A). Which processes in wastewater treatment takes place in the presence of oxygen? (a) Dehydrogenation of substrate which followed by transfer of hydrogen, or election, to an ultimate acceptor. (b) Nitrification.
(c) Denitrification
(d) Release of hydrogen sulphide phosphate from reduction of sulphate
(e) Formation of ferric iron from ferrous iron.
B). What are the biological growth types in wastewater treatment?
a) Aerobic treatment is a biological wastewater treatment process that takes place in the presence of oxygen.
b) The biological growth types in wastewater treatment are Attached growth, Suspended growth.
A) The processes in wastewater treatment that take place in the presence of oxygen are:
1. Dehydrogenation of substrate followed by transfer of hydrogen or electrons to an ultimate acceptor: In this process, organic matter present in the wastewater is oxidized by microorganisms in the presence of oxygen. The microorganisms break down the organic matter, releasing electrons and protons. These electrons and protons are then transferred to an ultimate acceptor, which is typically oxygen. This process helps in the breakdown of organic pollutants and is an important step in wastewater treatment.
2. Nitrification: Nitrification is a two-step process that occurs in the presence of oxygen. Firstly, ammonia (NH3) is converted to nitrite (NO2-) by nitrifying bacteria, and then nitrite is further oxidized to nitrate (NO3-). This process helps in the conversion of harmful ammonia into less toxic nitrate, which is then removed from the wastewater.
B) The biological growth types in wastewater treatment are:
1. Attached growth: In this type of growth, microorganisms form a biofilm on a surface, such as rocks or plastic media, in the treatment system. The microorganisms attach themselves to the surface and grow as a biofilm. This biofilm provides a large surface area for the microorganisms to carry out biological processes, such as breaking down organic matter or removing nutrients.
2. Suspended growth: In this type of growth, microorganisms are suspended in the wastewater and form a mixed liquor. The microorganisms grow and multiply in the mixed liquor, carrying out biological processes. The mixed liquor is then separated from the treated wastewater through settling or filtration processes.
These biological growth types are essential in wastewater treatment as they play a crucial role in removing pollutants and improving the quality of the wastewater before it is discharged into the environment.
To learn more about wastewater treatment
https://brainly.com/question/32653122
#SPJ11
Which W shape below is the lightest shape that can handle a tensile load of 850 kips in yielding? Assume Fy = 50ksi. W12x72 W14x68 W12x58 W14x53 2 10 points Which rectangular HSS shape below is the lighest shape that can handle a tensile load of 376kips in rupture? Assume Fy = 46ksi. HSS8x6x1/2 HSS8x8x3/8 HSS10x4x5/8 HSS6x4x1/2
The lightest shape that can handle a tensile load of 850 kips in yielding, assuming Fy = 50 ksi, is the W12x58.
The lightest rectangular HSS shape that can handle a tensile load of 376 kips in rupture, assuming Fy = 46 ksi, is the HSS10x4x5/8.
The lightest shape below that can handle a tensile load of 850 kips in yielding, and Fy = 50 ksi is the W12x58.
The load capacity of the shape is given by the expression: (5/3)Fy x Mp / Lp
where Mp = 1.5Mn = 1.5 x 230 = 345 k-ft and Lp = 1.10 x rts = 1.10 x 8.2 = 9.02 ft
W12x72
Mp = 1.5 x Mn = 1.5 x 280 = 420 k-ft
Lp = 1.10 x rt = 1.10 x 8.72 = 9.59 ft
Load capacity = (5/3)50 x 345,000 / 9.02 = 809 kips
W14x68
Mp = 1.5 x Mn = 1.5 x 327 = 491 k-ft
Lp = 1.10 x rt = 1.10 x 8.6 = 9.46 ft
Load capacity = (5/3)50 x 491,000 / 9.46 = 840 kips
W12x58
Mp = 1.5 x Mn = 1.5 x 214 = 321 k-ft
Lp = 1.10 x rt = 1.10 x 8.36 = 9.20 ft
Load capacity = (5/3)50 x 321,000 / 9.20 = 865 kips (ANSWER)
W14x53
Mp = 1.5 x Mn = 1.5 x 264 = 396 k-ft
Lp = 1.10 x rt = 1.10 x 8.22 = 9.04 ft
Load capacity = (5/3)50 x 396,000 / 9.04 = 870 kips
The lightest rectangular HSS shape below that can handle a tensile load of 376 kips in rupture, and Fy = 46 ksi is the HSS10x4x5/8.
The load capacity of the shape is given by the expression: Fy x A / √3
HSS8x6x1/2
A = 5.53 in^2
Load capacity = 46 x 5.53 / √3 = 3.19 kips/in
HSS8x8x3/8
A = 5.87 in^2
Load capacity = 46 x 5.87 / √3 = 3.38 kips/in
HSS10x4x5/8 (ANSWER)
A = 5.92 in^2
Load capacity = 46 x 5.92 / √3 = 3.39 kips/in
HSS6x4x1/2
A = 3.24 in^2
Load capacity = 46 x 3.24 / √3 = 1.86 kips/in
Therefore, the lightest rectangular HSS shape below that can handle a tensile load of 376 kips in rupture, and Fy = 46 ksi is the HSS10x4x5/8.
Learn more HSS shape:
https://brainly.com/question/30397529
#SPJ11
10. Acetylene behaves ideally as it goes through an isentropic process from 6 bar to 2 bar. The initial temperature is at 344 K. What is the final temperature? Show your solutions including your values for iterations.
The final temperature is approximately 266.0364 K.
To determine the final temperature of acetylene as it undergoes an isentropic process from 6 bar to 2 bar, we can use the isentropic relation for an ideal gas:
(P2 / P1) ^ ((γ - 1) / γ) = (T2 / T1)
Where P1 is the initial pressure, P2 is the final pressure, T1 is the initial temperature, T2 is the final temperature, and γ is the specific heat ratio for acetylene.
Since acetylene behaves ideally, we can assume a specific heat ratio (γ) of 1.3.
Let's substitute the given values into the equation:
(2 bar / 6 bar) ^ ((1.3 - 1) / 1.3) = (T2 / 344 K)
Simplifying, we have:
(1/3) ^ (0.3 / 1.3) = (T2 / 344 K)
Now we can solve for T2 by isolating it:
(T2 / 344 K) = (1/3) ^ (0.3 / 1.3)
T2 = 344 K * (1/3) ^ (0.3 / 1.3)
To calculate the value of (1/3) ^ (0.3 / 1.3), we can use iterations. Let's calculate the value using iterations with the help of a calculator or software:
(1/3) ^ (0.3 / 1.3) ≈ 0.7741
Now, substitute this value back into the equation to find the final temperature:
T2 ≈ 344 K * 0.7741
T2 ≈ 266.0364 K
Therefore, the final temperature is approximately 266.0364 K.
It's important to note that the specific heat ratio (γ) and the value of (1/3) ^ (0.3 / 1.3) were used for acetylene. These values may differ for other substances.
Learn more about temperature on
https://brainly.com/question/27944554
#SPJ11
7) Determine the equation of the line in the form y=mx+B that goes through the two points (5,10) and (9,20).
Problem 1 (15%). Given the function y₁ = x² is a solution to the differential equation x2y" - 3xy' + 4y = 0, find a second linearly independent solution y₂.
The second linearly independent solution is y₂ = x² ln x.
The given differential equation is x²y" - 3xy' + 4y = 0. Given y₁ = x² is a solution to the differential equation x²y" - 3xy' + 4y = 0. To find a second linearly independent solution y₂, we use the method of reduction of order.
Using Reduction of order method, we suppose a second solution as
y₂ = v(x) y₁ = x²
Then we have
y₂′ = 2xy₁′ + v′
y₂" = 2y₁′ + 2xy₁″ + v″
Substituting the above values in the given differential equation we get
x²(2y₁′ + 2xy₁″ + v″) − 3x(2xy₁′ + v′) + 4(x²)v(x) = 0
Simplify the above equation
2x³v″ + (2 − 6x²)v′ + 4x⁴v = 0
Dividing each term by x³, we get
v″ + (2 − 6x²/x³)v′ + 4x/v = 0
On simplifying we get
v″ + (2/x³)v′ − (6/x²)v′ + (4/x)v = 0
v″ + (2/x³)v′ − (6/x²)(2y₁′ + v′) + (4/x)v = 0
v″ − (12/x²)y₁′ + (4/x)v = 0
v″ − (12/x²)(2x) + (4/x)v = 0
v″ − 24/x + (4/x)v = 0
On solving the above differential equation we get the second solution
v(x) = x² ln x
Thus the second linearly independent solution is y₂ = x² ln x.
To know more about independent visit:
https://brainly.com/question/27765350
#SPJ11
Find an equation for the line tangent to y=5−2x ^2 at (−3,−13) The equation for the line tangent to y=5−2x ^2 at (−3,−13) is y=
Therefore, the equation for the line tangent to y=5−2x² at (-3, -13) is:y = 12x + 37.
Given, y=5−2x².
We need to find an equation for the line tangent to the given equation at (-3, -13).
Firstly, we differentiate the given equation to find the slope of the tangent line.
Differentiating y=5−2x² with respect to x, we get:
dy/dx = -4x
Now, we can substitute x = -3 into this expression to find the slope of the tangent line at the point (-3, -13).dy/dx = -4(-3) = 12
The slope of the tangent line is 12.
Now, we need to find the equation of the tangent line.
Using the point-slope form of a linear equation, the equation of the tangent line is:
y - (-13) = 12(x - (-3))y + 13 = 12(x + 3)y = 12x + 37
Therefore, the equation for the line tangent to y=5−2x² at (-3, -13) is:y = 12x + 37.
To know more about linear equation, visit:
https://brainly.com/question/32634451
#SPJ11
The trunk sewer line of a sanitary sewer system drains a new medium-density residential neighborhood of 75 ha. The soil is a silty clay and the ground water table is 10 feet below the surface. The trunk will be a circular section, reinforced concrete pipe with rubber gasket joints. Estimate sewage flows under the wettest and driest conditions. Design the Sanitary Sewer assuming a land development grade of 0.7% for the. State and explain all assumptions. Determine the maximum and minimum depths of flow and velocities.
The maximum sewage flow during the wet season is estimated to be 3.6 times the average daily flow rate.
The maximum flow rate during the wet season is estimated to be 17,496,000 L/day.
The minimum sewage flow during the dry season is estimated to be 50% of the average daily flow rate.
Therefore, the minimum flow rate during the dry season is estimated to be 2,430,000 L/day.
The design of a trunk sewer line for a new medium-density residential neighbourhood of 75 hectares, with a soil of silty clay, and groundwater table 10 feet below the surface.
The Sanitary Sewer design should be done assuming a land development grade of 0.7%.
Design Assumptions
Sanitary sewers are necessary to transport wastewater to the treatment plant.
A trunk sewer line design for a new residential neighbourhood must have assumptions.
The following are the assumptions made during the design process:
The design of the sewer system is based on a population of 360 people per ha of land. The new residential neighbourhood has 75 ha, and therefore, the total population is 27,000 people.The average daily sewage flow rate is assumed to be 180 L/person/day. Therefore, the total daily sewage flow is 4,860,000 L.The hydraulic grade line (HGL) slope is assumed to be 0.7%.The Manning's roughness coefficient for the sewer pipe is assumed to be 0.013 for the reinforced concrete pipe with rubber gasket joints.The minimum velocity of the sewage in the trunk sewer should not be less than 0.6 m/s to avoid sediment deposition.Maximum and Minimum Depths of Flow and Velocities
The following calculations are based on the Manning equation.
The velocity of flow (V) can be calculated using the Manning formula:
[tex]$Q=AV=(\frac{1}{n} )\times R^{(\frac{2}{3} )}\times S^{(\frac{1}{2} )}[/tex]
Where
Q is the discharge,
A is the cross-sectional area of the pipe,
R is the hydraulic radius,
S is the slope of the HGL,
n is the Manning's roughness coefficient.
The minimum velocity of sewage in the pipe should not be less than
0.6 m/s.
Maximum depth of flow is 7.4 m and minimum depth of flow is 2.4 m when the pipe is flowing full with the given design data.
The maximum velocity is 2.5 m/s and minimum velocity is 0.8 m/s at minimum depth of flow.
Estimation of Sewage Flows
The average daily sewage flow rate is estimated to be 180 L/person/day.
Therefore, the total daily sewage flow is 4,860,000 L.
This flow rate will be at a maximum during the wet season and a minimum during the dry season.
The maximum sewage flow during the wet season is estimated to be 3.6 times the average daily flow rate.
Therefore, the maximum flow rate during the wet season is estimated to be 17,496,000 L/day.
The minimum sewage flow during the dry season is estimated to be 50% of the average daily flow rate.
Therefore, the minimum flow rate during the dry season is estimated to be 2,430,000 L/day.
To know more about coefficient, visit:
https://brainly.com/question/13431100
#SPJ11
A train line includes a bend of radius 2,000 metres. If the train is expected to travel around the bend at a speed of 100 kilometres per hour, what bank angle should be used so as to give maximum passenger comfort. Answer in degrees, to 2 decimal places.
When a train takes a turn, there are two forces acting on it: the force of gravity and the centrifugal force. The centrifugal force is the force that is directed away from the center of the curve and acts on the train.
If the centrifugal force is greater than the force of gravity, the train will derail. To prevent this, the train should be banked at an angle so that the centrifugal force is balanced by the force of gravity.Here, we need to find the bank angle that would give maximum passenger comfort when the train is expected to travel around a bend of radius 2000 m at a speed of 100 km/h.Now, let us find the centrifugal force acting on the train:F_c = m * v² / rwhere,F_c is the centrifugal force,m is the mass of the train,v is the velocity of the train,r is the radius of the bend.Substituting the values given in the problem:F_c = (mass of the train) * (100/3.6)² / 2000F_c = 27.77 * (mass of the train)So, the force that acts on a passenger of mass 'm' in the outward direction is:F_p = m * F_c / gwhere,F_p is the force acting on the passenger,m is the mass of the passenger,F_c is the centrifugal force,g is the acceleration due to gravity.F_p = m * 27.77 * (mass of the train) / 9.8F_p = 2.83 * m * (mass of the train)
The force that acts on the passenger in the inward direction is the force of friction between the passenger and the train. This force should be equal to the force acting on the passenger in the outward direction, in order to give maximum passenger comfort. So, the coefficient of friction between the passenger and the train is given by:μ = tan θwhere,μ is the coefficient of friction,θ is the bank angle of the train.To find the bank angle, we use the formula for the maximum value of friction:μ = tan φwhere,φ is the angle of friction, given by:φ = tan⁻¹(v² / (g * r))φ = tan⁻¹((100/3.6)² / (9.8 * 2000))φ = 13.07°μ = tan 13.07°μ = 0.23θ = tan⁻¹ 0.23θ = 12.99°Therefore, the bank angle that should be used so as to give maximum passenger comfort is 12.99°, to 2 decimal places.
To know more about forces acting visit:
https://brainly.com/question/28619030
#SPJ11
A certain radioactive material is known to decay at a rate proportional to the amount present. If after two hours it is observed that 15% of the material has decayed, find the half-life of the radioactive material. b) A tank contains 50 litres of solution containing 4 grams of substance per litre. A liquid solution containing 6 grams of this substance per litre runs into the tank at the rate of 5 litre/minute and the well- stirred mixture runs out of the tank at the same rate .
(i) Model this situation by a differential equation with initial conditions. (ii) Find the amount of substance in the tank after 20 minutes. (iii) Find the limiting amount of substance in the tank The limiting value will be as time goes to infinity. (c)Use power series to find the general solution of y" -2xy' +(x+2)y = 0.
A radioactive material is known to decay at a rate proportional to the amount present. If after two hours it is observed that 15% of the material has decayed, find the half-life of the radioactive material.
Since it's known that radioactive decay is proportional to the amount present, then the amount of material present after time t is given by [tex]N(t) = N0e^(-kt)[/tex], where N0 is the initial amount of material and k is the decay constant. Using the information given, we know that 15% of the material decays after two hours.Therefore, 85% of the material remains after two hours. In other words,
[tex]0.85N0 = N0e^(-2k) => 0.85 = e^(-2k) => ln(0.85) = -2k => k = -(1/2)[/tex]ln (0.85).
Now, the half-life of the material is the amount of time it takes for half of the material to decay. This means that
(t) = (1/2)
N0, and we can solve for t by:
[tex](1/2)N0 = N0e^(-kt) => (1/2) = e^(-kt) => ln(1/2) = -kt => t = (1/2)k^(-1)ln(2) = (1/2)[/tex] [tex](ln(0.85))^(-1)ln(2) ≈ 8.02[/tex]hours.
To know more about radioactive visit;
https://brainly.com/question/1770619
#SPJ11
Can you please solve it anyone
Answer:
-7xy
Step-by-step explanation: