Determine the number of particles the following solutions
become?
a. sucrose (sugar)
b. C9Hl0O2
c. an organic compound
d. sodium chloride
e. glucose
f. aluminum sulfate

The pH of a 0.05 M H2SO4 solution is approximately 1.3.

To find the pH of a 0.05 M H2SO4 solution, we need to consider the ionization of sulfuric acid (H2SO4) in water. Sulfuric acid is a strong acid, meaning it completely ionizes in water.

Step 1: Write the balanced chemical equation for the ionization of sulfuric acid:
H2SO4 (aq) -> 2H+ (aq) + SO4^2- (aq)

Step 2: Calculate the concentration of H+ ions in the solution. Since sulfuric acid is a strong acid, the concentration of H+ ions is equal to the concentration of the acid. In this case, the concentration is 0.05 M.

Step 3: Calculate the pH using the equation:
pH = -log[H+]

Substituting the concentration of H+ ions, we have:
pH = -log(0.05)

Step 4: Calculate the pH value using a calculator or the log table. In this case, the pH is approximately 1.3.

Therefore, the pH of a 0.05 M H2SO4 solution is approximately 1.3.

It's important to note that the Ka values given (Ka1 = 1000 and Ka2 = 0.012) are not directly used to calculate the pH in this case since sulfuric acid is a strong acid. These values would be used if we were dealing with a weak acid, such as acetic acid (CH3COOH).

Learn more about pH solution:

https://brainly.com/question/12609985

#SPJ11

The angular momentum of the rotor is approximately 1913.162 kg-m²/s.

To solve for the angular momentum of the rotor, we'll use the formula:

Angular momentum (L) = Moment of inertia (I) x Angular velocity (ω)

Given:
Angular velocity (ω) = 3600 RPM
Moment of inertia (I) = 5.076 kg-m²

First, we need to convert the angular velocity from RPM (revolutions per minute) to radians per second (rad/s) because the moment of inertia is given in kg-m².

1 revolution = 2π radians
1 minute = 60 seconds

Angular velocity in rad/s = (3600 RPM) x (2π rad/1 revolution) x (1/60 minute/1 second)
Angular velocity in rad/s = (3600 x 2π) / 60
Angular velocity in rad/s = 120π rad/s

Now we can substitute the values into the formula:

Angular momentum (L) = (Moment of inertia) x (Angular velocity)
L = 5.076 kg-m² x 120π rad/s

To calculate the numerical value, we need to approximate π as 3.14159:

L ≈ 5.076 kg-m² x 120 x 3.14159 rad/s
L ≈ 1913.162 kg-m²/s

Therefore, the angular momentum of the rotor is approximately 1913.162 kg-m²/s.

To know more about velocity click-
https://brainly.com/question/29483294
#SPJ11

The volume of a specific weight of gas varies directly as the absolute temperature f and inversely as the pressure P.The volume is 1.29 m³.

According to the given information, the volume of a specific weight of gas varies directly with the absolute temperature (T) and inversely with the pressure (P). Mathematically, this can be expressed as V ∝ fT/P, where V represents the volume, f is a constant, T is the absolute temperature, and P is the pressure.

To find the volume when P is 433 kPa and T is 343 K, we can set up a proportion using the initial values. We have:

V₁/P₁ = V₂/P₂

Substituting the given values, we get:

1.23/479 = V₂/433

Solving this equation, we find V₂ ≈ 1.29 m³. Therefore, the volume is approximately 1.29 m³.

The relationship between the volume of a gas, its temperature, and pressure is described by the ideal gas law. According to this law, when the amount of gas and the number of molecules remain constant, increasing the temperature of a gas will cause its volume to increase proportionally. This relationship is known as Charles's Law. On the other hand, as the pressure applied to a gas increases, its volume decreases. This relationship is described by Boyle's Law.

In the given question, we are asked to determine the volume of gas when the pressure and temperature values change. By applying the principles of direct variation and inverse variation, we can solve for the unknown volume. Direct variation means that when one variable increases, the other variable also increases, while inverse variation means that when one variable increases, the other variable decreases.

In step one, we set up a proportion using the initial volume (1.23 m³), pressure (479 kPa), and temperature (344 K). By cross-multiplying and solving the equation, we find the value of the unknown volume when the pressure is 433 kPa and the temperature is 343 K. The answer is approximately 1.29 m³.

Learn more about volume

brainly.com/question/33501668

#SPJ11

It is appropriate to indicate the equilibrium symbol, which is a double arrow. CO32- + H+ ⟷ HCO3-

The carbonate ion is CO32-.

a. The conjugate acid of the carbonate ion is HCO3- since it is derived from the reaction between CO32- and H+ ions; this reaction is shown below: CO32- + H+  ⟷  HCO3-

The forward reaction is a weak one; hence, it goes in both directions. However, the reverse reaction is even weaker. b. This is a reversible reaction because it can be turned around and both the forward and backward reactions can occur. Therefore, it is appropriate to indicate the equilibrium symbol, which is a double arrow. CO32- + H+ ⟷ HCO3-

The equation is also an acid-base reaction since both H+ and CO32- ions are involved in the reaction.

c. CO32- + H+ ⟷ HCO3- is a chemical equation that represents the reaction between a weak base (CO32-) and a weak acid (H+).

To know more about equilibrium visit-

https://brainly.com/question/30694482

#SPJ11

The value of x that satisfies the original equation is 7.

In the given equation, x + (-8) = 3x + 6, Sherry follows a series of steps to solve it. In step 1, she adds 1 negative x-tile to both sides to create zero pairs, resulting in -8 = 2x + 6.

Step 2 involves adding 8 positive unit tiles to both sides, again creating zero pairs and simplifying the equation to -8 + 8 = 2x + 6 + 8, which further simplifies to 0 = 2x + 14. In step 3, Sherry divides the 14 units evenly among the 2 x-tiles, leading to 0 = x + 7. Finally, in step 4, she identifies the solution as x = 7.

To explain this process further, Sherry uses algebraic manipulations to isolate the variable x. By performing the same operation on both sides of the equation, she ensures that the equation remains balanced.

In step 1, she cancels out one x on the left side by adding a negative x, and in step 2, she cancels out the constant term (-8) on the left side by adding its additive inverse, which is 8.

This allows her to simplify the equation and eliminate the constant term on the left side. In step 3, Sherry divides the coefficient of x, which is 2, by the constant term on the right side, which is 14, to isolate x.

Finally, she arrives at the solution x = 7 by recognizing that the remaining x term is equivalent to zero. Therefore, the value of x that satisfies the original equation is 7.

for such more questions on  equation

https://brainly.com/question/17145398

#SPJ8

The concentration of the unknown H₂SO₄ solution is 0.053525 M.

To calculate the concentration of the unknown H₂SO₄ solution, we can use the concept of stoichiometry and the balanced chemical equation of the reaction between H₂SO₄ and NaOH.

The balanced chemical equation is:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

Given information:
- Volume of H₂SO₄ solution = 15.00 mL
- Volume of NaOH solution = 2.35 mL
- Concentration of NaOH solution = 0.685 M

To find the concentration of H₂SO₄, we need to use the mole-to-mole ratio from the balanced equation. Since the ratio is 1:2 between H₂SO₄ and NaOH, we can determine the moles of NaOH used.

First, convert the volume of NaOH solution from mL to L:
2.35 mL = 2.35/1000 L = 0.00235 L

Next, calculate the moles of NaOH:
moles of NaOH = volume (in L) × concentration (in M) = 0.00235 L × 0.685 M = 0.00160575 moles NaOH

Using the mole-to-mole ratio, we know that 1 mole of H₂SO₄ reacts with 2 moles of NaOH. Therefore, the moles of H₂SO₄ used can be calculated as:
moles of H₂SO₄ = 0.00160575 moles NaOH ÷ 2 = 0.000802875 moles H₂SO₄

Now, convert the volume of H₂SO₄ solution from mL to L:
15.00 mL = 15.00/1000 L = 0.015 L

Finally, calculate the concentration of the unknown H₂SO₄ solution:
concentration of H₂SO₄ = moles of H₂SO₄ ÷ volume (in L) = 0.000802875 moles ÷ 0.015 L = 0.053525 M

Therefore, the concentration of the unknown H₂SO₄ solution is 0.053525 M.

In summary, to determine the concentration of the unknown H₂SO₄ solution, we used the mole-to-mole ratio from the balanced chemical equation to calculate the moles of H₂SO₄. By dividing the moles of H₂SO₄ by the volume of the H₂SO₄ solution, we obtained a concentration of 0.053525 M.

Learn More About " concentration" from the link:

https://brainly.com/question/17206790

#SPJ11

The Maclaurin series expansion of the function ƒ(x) = cos(x²) can be obtained by substituting x² into the Maclaurin series expansion of cos(x). The radius of convergence of the resulting series is determined by the convergence properties of the original function.



The Maclaurin series expansion of cos(x) is given by cos(x) = 1 - x²/2! + x⁴/4! - x⁶/6! + ..., where the terms are derived from the even powers of x and alternate signs.

To find the Maclaurin series expansion of cos(x²), we substitute x² into the expansion of cos(x), yielding cos(x²) = 1 - (x²)²/2! + (x²)⁴/4! - (x²)⁶/6! + ...

Simplifying further, we have cos(x²) = 1 - x⁴/2! + x⁸/4! - x¹²/6! + ...

The resulting series is the Maclaurin series expansion of cos(x²).

To determine the radius of convergence of the series, we consider the convergence properties of the original function, cos(x²). The function cos(x²) is defined for all real values of x, which implies that the Maclaurin series expansion of cos(x²) converges for all real values of x. Therefore, the radius of convergence of the series is infinite, indicating that it converges for all values of x.

Learn more about function here: brainly.com/question/31062578

#SPJ11

The Maclaurin series expansion of the function ƒ(x) = cos(x²) can be obtained by substituting x² into the Maclaurin series expansion of cos(x). The radius of convergence of the series is infinite, indicating that it converges for all values of x.

The radius of convergence of the resulting series is determined by the convergence properties of the original function.

The Maclaurin series expansion of cos(x) is given by cos(x) = 1 - x²/2! + x⁴/4! - x⁶/6! + ..., where the terms are derived from the even powers of x and alternate signs.

To find the Maclaurin series expansion of cos(x²), we substitute x² into the expansion of cos(x), yielding cos(x²) = 1 - (x²)²/2! + (x²)⁴/4! - (x²)⁶/6! + ...

Simplifying further, we have cos(x²) = 1 - x⁴/2! + x⁸/4! - x¹²/6! + ...

The resulting series is the Maclaurin series expansion of cos(x²).

To determine the radius of convergence of the series, we consider the convergence properties of the original function, cos(x²). The function cos(x²) is defined for all real values of x, which implies that the Maclaurin series expansion of cos(x²) converges for all real values of x. Therefore, the radius of convergence of the series is infinite, indicating that it converges for all values of x.

Learn more about function here: brainly.com/question/31062578

#SPJ11

In triangle ABC, angle B measures 75 degrees. This is determined by solving the equation representing the sum of the triangle's angles and substituting the value obtained for angle B.

In triangle ABC, let's assume the measure of angle A is x degrees. According to the given information, angle C is 25 degrees more than angle A, so angle C is (x + 25) degrees. Angle B is stated to be 30 degrees less than the sum of the other angles, which means angle B is (x + (x + 25) - 30) degrees, simplifying to (2x - 5) degrees.

Since the sum of the angles in a triangle is always 180 degrees, we can write the equation: x + (x + 25) + (2x - 5) = 180.

Solving this equation will give us the value of x, which represents the measure of angle A. Substituting this value back into the expression for angle B, we find that angle B is (2x - 5) degrees.

Step 3: By solving the equation x + (x + 25) + (2x - 5) = 180, we can find the value of x, which represents the measure of angle A. Once we have the value of x, we can substitute it back into the expression for angle B, (2x - 5), to find the measure of angle B.

Let's solve the equation: x + (x + 25) + (2x - 5) = 180.

Combining like terms, we get 4x + 20 = 180.

Subtracting 20 from both sides gives 4x = 160.

Dividing both sides by 4, we find x = 40.

Substituting x = 40 into the expression for angle B, we have angle B = (2x - 5) = (2 * 40 - 5) = 80 - 5 = 75 degrees.

Therefore, the measure of angle B is 75 degrees.

Learn more about triangle ABC

brainly.com/question/29785391

#SPJ11

To determine the equivalent CO concentration in µg/m3 and mg/L, we can use the following steps:
1. Convert ppm to µg/m3:
  - Since 1 ppm is equivalent to 1 µg/m3, the concentration of CO in µg/m3 is also 9 µg/m3.
2. Convert µg/m3 to mg/L:
  - To convert from µg/m3 to mg/L, we need to consider the density of air.
  - The density of air at 0°C and 1 atm pressure is approximately 1.225 kg/m3.
  - Therefore, the density of air in mg/L is 1.225 mg/L.
  - Since 1 kg = 1,000,000 µg, we can calculate the conversion factor as follows:
    1,000,000 µg / 1,225 mg = 817.073 µg/m3 / 1 mg/L.
  - Multiplying the CO concentration of 9 µg/m3 by the conversion factor, we get:
    9 µg/m3 * 817.073 µg/m3 / 1 mg/L = 7,353.657 µg/m3 ≈ 7.35 mg/L.

So, the equivalent CO concentration is approximately 9 µg/m3 and 7.35 mg/L.

conversion factor : https://brainly.com/question/7716790

#SPJ11

The length of EB is 6

First, we need to know the chord theorem is a statement in elementary geometry that describes a relation of the four line segments created by two intersecting chords within a circle

From the information given, we have that;

EB = x

DE = 2x

AE = 9

EC = 8

Using the chord theorem, we have that;

DE(EB) = AE(EC)

substitute the value, we have;

2x(x) = 9(8)

multiply the values

2x²= 72

Divide by the coefficient

x² = 36

Find the square root

x = 6

But EB = x = 6

Learn about chords at: https://brainly.com/question/13950364

#SPJ1

The adoption of flue gas desulphurisation methods using lime can effectively treat the 5 tons of SO2 produced daily by the energy production plant. This process involves a chemical reaction that removes sulfur dioxide from the flue gas before it is discharged.

Flue gas desulphurisation (FGD) is a technique used to remove sulfur dioxide (SO2) from the flue gas emitted by industrial processes, particularly power plants that burn fossil fuels. Lime, or calcium oxide (CaO), is commonly used as a reagent in FGD systems. When lime is injected into the flue gas, it reacts with the sulfur dioxide to form calcium sulfite (CaSO3) and water (H2O).

The chemical reaction can be represented as follows

CaO + SO2 + H2O → CaSO3•H2O

In this reaction, the lime reacts with sulfur dioxide and water to produce calcium sulfite, which is a solid precipitate. This precipitate can then be further oxidized to form calcium sulfate (CaSO4), commonly known as gypsum, which is a stable and non-hazardous solid. Gypsum has various beneficial uses, such as in construction materials and agricultural applications.

By implementing flue gas desulphurisation using lime, the energy production plant can effectively remove the sulfur dioxide emissions and ensure compliance with environmental regulations. This method helps mitigate the adverse effects of SO2 on air quality and human health, as well as prevent the formation of acid rain.

Flue gas desulphurisation (FGD) is a widely adopted technology in industries that produce sulfur dioxide emissions. It is crucial for these industries to comply with environmental regulations and reduce their impact on air quality. FGD methods using lime or other sorbents are effective in capturing sulfur dioxide and minimizing its release into the atmosphere. This process plays a significant role in reducing air pollution and addressing the environmental challenges associated with sulfur dioxide emissions.

Learn more about flue gas desulphurisation

brainly.com/question/13288872

#SPJ11

The initial condition y(0) = 2, we get:2 = 0 + C So, the solution to the initial value problem is:y = -([tex]9/11) x^11 ln|x| + 2(1+x^11).[/tex]

Given differential equation [tex](1+x^11)y′+11x^10y=9x^17[/tex]with initial condition y(0) = 2

To solve the initial value problem, we need to find y' first. For that, divide the differential equation by (1+x^11):y' + 11x^10/(1+x^11)y = 9x^17/(1+x^11)This is a first-order linear differential equation of the form:

y' + P(x)y = Q(x)where P(x) = 11x^10/(1+x^11) and Q(x) = 9x^17/(1+x^11)Using the integrating factor, I = e^ integral P(x) dx, we can solve this equation. I = e^ integral P(x) dx = e^ integral (11x^10/(1+x^11)) dx Taking u = 1+x^11, the integral becomes: integral [tex]11x^10/(1+x^11) dx= 11/11 integral (u-1)/u du= ln|u| - ln|u-1| + C = ln|(1+x^11)/(x^11)| + C.[/tex]

Now, the integrating factor is I = e^ln|(1+x^11)/(x^11)| = (1+x^11)/x^11Multiplying both sides of the differential equation by I, we get:[tex](1+x^11)y'/x^11 + 11(x^11+y^11)/(x^11(1+x^11))y = 9/(1+x^11).[/tex]

Now, the left-hand side of the equation can be written in the form of the derivative of a product using the product rule. Differentiate both sides of the equation and simplify to get:

[tex]y/(1+x^11) = -9/11 ln|x| + C[/tex] (where C is the constant of integration)

Multiplying both sides of the equation by (1+x^11), we get:y = -(9/11) x^11 ln|x| + C(1+x^11).

Substituting t

To know more about differential visit:

https://brainly.com/question/33433874

#SPJ11

Among the options provided, the strong base is calcium hydroxide (Ca(OH)2). Calcium hydroxide is considered a strong base because it dissociates completely in water to form calcium ions (Ca2+) and hydroxide ions (OH-).

The dissociation of calcium hydroxide is as follows: Ca(OH)2 → Ca2+ + 2OH-

The presence of a high concentration of hydroxide ions makes calcium hydroxide a strong base.

On the other hand, nickel hydroxide (Ni(OH)2) and chromium hydroxide (Cr(OH)3) are not considered strong bases. They are classified as weak bases. Weak bases do not completely dissociate in water, meaning that only a small fraction of the compound forms hydroxide ions.

In summary, calcium hydroxide (Ca(OH)2) is the strong base among the options provided, while nickel hydroxide (Ni(OH)2) and chromium hydroxide (Cr(OH)3) are classified as weak bases.

The distinction between strong and weak bases lies in the extent of dissociation and the concentration of hydroxide ions produced in aqueous solution.

Strong bases dissociate completely and produce a high concentration of hydroxide ions, while weak bases only partially dissociate and produce a lower concentration of hydroxide ions.

Learn more about chromium hydroxide from the given link!

https://brainly.com/question/14352809

#SPJ11

Answer:

No real number solution.

Step-by-step explanation:

y² = -64

Extract square root

[tex]\sqrt{y^2} =\sqrt{-64} \\y = \sqrt{8^2(-1)} \\y = 8i, y = -8i\\[/tex]

There is no real number solution. The solution consists of imaginary numbers represented by i.

Answer:

y^2 = -64

therfore,

y = [tex]\sqrt{-64}[/tex]

but a number under square root can never be negative until and unless it is a non-real number.

Thus, there is no solution to this.

thank you

Step-by-step explanation:

The probability of winning this game is approximately 1.83%.

Whether you should play the game depends on your personal risk tolerance, financial situation, and the expected value of the game.

The expected value of a game is the average amount of money you can expect to win or lose per game over a long period of time.

In this case, the expected value to you is $900.

To calculate the expected value, we need to consider the possible outcomes and their probabilities.

We know that the cost to play the game is $900.

If you win, you receive $100,000, which includes your $900 bet.

So the net gain from winning is $99,100.

Let's assume the probability of winning is "x".

The probability of losing would then be "1 - x".

The expected value can be calculated as follows:

Expected Value = (Probability of Winning) * (Net Gain from Winning) + (Probability of Losing) * (Net Gain from Losing)

$900 = x * $99,100 + (1 - x) * (-$900)

Simplifying the equation, we get:

$900 = $99,100x - $900x - $900

Combining like terms, we have:

$900 = $98,200x - $900

Adding $900 to both sides:

$1,800 = $98,200x

Dividing both sides by $98,200:

x = $1,800 / $98,200

x ≈ 0.0183

Therefore, the probability of winning is approximately 0.0183, or 1.83%.

Now, let's discuss whether you should play this game. Your decision depends on a few factors. One important factor to consider is the expected value.

In this case, the expected value is positive, which means, on average, you can expect to make money over a long period of time.

This suggests that it might be a good game to play.

However, it's important to also consider your personal risk tolerance and financial situation. The cost to play the game is $900, which might be a significant amount of money for some individuals.

Additionally, the probability of winning is relatively low at approximately 1.83%.

If losing $900 would have a significant impact on your financial well-being, it might be wise to reconsider playing the game.

Ultimately, the decision to play or not to play depends on your personal preferences, risk tolerance, and financial circumstances. It's important to carefully consider these factors before making a decision.

In summary, the probability of winning this game is approximately 1.83%. Whether you should play the game depends on your personal risk tolerance, financial situation, and the expected value of the game.

Learn more about probability from this link:

https://brainly.com/question/13604758

#SPJ11

a) To calculate the pressure drop parameter (α) in case (1), we can use the following equation:

α = (ΔP / P_inlet) * (V_inlet / V_outlet)
where:
ΔP = Pressure drop (P_inlet - P_outlet)
P_inlet = Inlet pressure
V_inlet = Inlet volumetric flow rate
V_outlet = Outlet volumetric flow rate

In this case, the volumetric flow rate at the outlet is 6 times the volumetric flow rate at the inlet. Let's assume the inlet volumetric flow rate (V_inlet) is V dm³/min. Therefore, the outlet volumetric flow rate (V_outlet) would be 6V dm³/min.
Now, let's substitute the values into the equation and solve for α:
α = (ΔP / P_inlet) * (V_inlet / V_outlet)
α = (P_inlet - P_outlet) / P_inlet * V_inlet / (6V)
α = (P_inlet - P_outlet) / (6P_inlet)

b) To calculate the conversion in case (1), we need to use the following equation:

X = (V_inlet - V_outlet) / V_inlet

where: V_inlet = Inlet volumetric flow rate

V_outlet = Outlet volumetric flow rate
In case (1), we already know that V_outlet = 6V_inlet.

Let's substitute the values into the equation and solve for X:
X = (V_inlet - 6V_inlet) / V_inlet
X = -5V_inlet / V_inlet
X = -5

c) In case (2), the volumetric flow rate remains unchanged. This means that V_outlet = V_inlet.

To calculate the conversion in case (2), we can use the same equation as in case (1):
X = (V_inlet - V_outlet) / V_inlet
Substituting V_outlet = V_inlet into the equation, we get:
X = (V_inlet - V_inlet) / V_inlet
X = 0

d) In case (1), the pressure drop parameter (α) is calculated to be (P_inlet - P_outlet) / (6P_inlet). The negative conversion value (-5) indicates that the reaction has not occurred completely and there is some unreacted A and B remaining.
In case (2), the conversion is calculated to be 0, indicating that no reaction has occurred. This is because the volumetric flow rate remains unchanged, and therefore, there is no change in the reactant concentration.

To know more about pressure drop parameter :

https://brainly.com/question/33226418

#SPJ11

Calculate the percent by mass of hydrobromic acid in the mixture.
- Percent by mass = (mass of hydrobromic acid / total mass of mixture) x 100

Calculate the percent by mass of  perchloric acid in the mixture.
- Percent by mass = (mass of perchloric  acid / total mass of mixture) x 100

To find the percent by mass of hydrobromic acid in the mixture, we need to use the information given and perform a series of calculations.

1) For the first question:

- We are given a 7.46 g sample of an aqueous solution of hydrobromic acid.
- We know that 29.6 mL of 0.120 M potassium hydroxide are required to neutralize the hydrobromic acid.

To calculate the percent by mass, we need to determine the mass of hydrobromic acid and then divide it by the total mass of the mixture (sample + hydrobromic acid).

Here are the steps to solve the problem:

Step 1: Calculate the moles of potassium hydroxide used.
- Moles = volume (in L) x concentration (in mol/L)
- Moles = 0.0296 L x 0.120 mol/L

Step 2: Use the balanced chemical equation to determine the moles of hydrobromic acid used.
- The balanced equation is: 1 mole of hydrobromic acid reacts with 1 mole of potassium hydroxide.
- Since the moles of potassium hydroxide and hydrobromic acid are the same, we can say that the moles of hydrobromic acid used are also equal to 0.0296 L x 0.120 mol/L.

Step 3: Calculate the mass of hydrobromic acid used.
- Mass = moles x molar mass of hydrobromic acid
- The molar mass of hydrobromic acid (HBr) is approximately 80.9119 g/mol.
- Mass = 0.0296 L x 0.120 mol/L x 80.9119 g/mol

Step 4: Calculate the percent by mass of hydrobromic acid in the mixture.
- Percent by mass = (mass of hydrobromic acid / total mass of mixture) x 100
- Total mass of the mixture is the given sample mass of 7.46 g.

2) For the second question:

- We are given a 9.54 g sample of an aqueous solution of perchloric acid.
- We know that 18.3 mL of 0.887 M potassium hydroxide are required to neutralize the perchloric acid.

Follow the same steps as in the first question to calculate the percent by mass of perchloric acid in the mixture.

Remember to substitute the appropriate values and molar mass of perchloric acid (HClO4), which is approximately 100.46 g/mol.

By following these steps, you can find the percent by mass of hydrobromic acid and perchloric acid in their respective mixtures.

Learn more about hydrobromic, perchloric:

https://brainly.com/question/24586675

#SPJ11

±1, ±2, ±5,1±10,±1/2, and ±5/2 for x should be tested to determine the possible zeros of 2x³ - 3x² + 3x - 10. Thus, option C is the correct answer.

To determine the possible zeros of the polynomial 2x³ - 3x² + 3x - 10, we need to test different values of x. The possible zeros are the values of x that make the polynomial equal to zero.

We can use the Rational Root Theorem to find the potential zeros. According to the theorem, the possible rational zeros are the factors of the constant term (in this case, 10) divided by the factors of the leading coefficient (in this case, 2).

The factors of 10 are 1, 2, 5, and 10. The factors of 2 are 1 and 2.

So, the set of values for x that should be tested to determine the possible zeros is the set of all the combinations of these factors:

a) ±1, ±2, and ±5
b) ±1, ±2, ±5, and ±10
c) ±1, ±2, ±5, ±10, ±1/2, and ±5/2
d) ±1, ±2, ±5, ±10, and ±2/5

In this case, the correct answer is option c) ±1, ±2, ±5, ±10, ±1/2, and ±5/2. These values should be tested to determine the possible zeros of the polynomial.

Learn more about polynomial at:

https://brainly.com/question/29110563

#SPJ11

This following ordinary differential equation (ODE) , using finite-difference with [tex]h=0.5 dy/dx2=(1-x/5)y+x, y(1)=2. y(3)= -1[/tex]calculating y(2.5) to the four digits. using [tex]d2y/dx2 = (y(i+1)-2y(i)+y(i-1)) /h²y(2.5)[/tex]is approximately -1.3333 when rounded to four decimal places.

To solve the given ordinary differential equation (ODE) using finite-difference approximation,  we'll use the formula for the second derivative:

[tex]d²y/dx² ≈ (y(i+1) - 2y(i) + y(i-1)) / h²[/tex]

where y(i+1), y(i), and y(i-1) represent the values of y at x(i+1), x(i), and x(i-1), respectively, and h is the step size.

Given:

h = 0.5

[tex]dy/dx² = (1 - x/5)y + x[/tex]

To approximate y(2.5), we'll calculate the values of y at x = 1, x = 2, and x = 3 using the finite-difference method.

1. Calculate y(1):

Using the initial condition y(1) = 2.

No calculation needed.

2. Calculate y(2):

For x = 2, we have i = 2 and i+1 = 3, and i-1 = 1.

Using the finite-difference formula:

[tex]d²y/dx² = (y(i+1) - 2y(i) + y(i-1)) / h²[/tex]

[tex](1 - x/5)y + x = (y(3) - 2y(2) + y(1)) / h²[/tex]

Plugging in the values:

[tex](1 - 2/5)y(2) + 2 = (-1 - 2y(2) + 2) / 0.5²[/tex]

Simplifying the equation:

[tex](3/5)y(2) = -1y(2) = -5/3[/tex]

3. Calculate y(3):

Using the given value y(3) = -1.

No calculation needed.

Now, we have y(1) = 2, y(2) = -5/3, and y(3) = -1.

4. Calculate y(2.5):

For x = 2.5, we need to interpolate the value of y between y(2) and y(3).

Using linear interpolation:

[tex]y(2.5) = y(2) + (x - 2) * ((y(3) - y(2)) / (3 - 2))[/tex]

Plugging in the values:

[tex]y(2.5) = -5/3 + (2.5 - 2) * ((-1 - (-5/3)) / (3 - 2))[/tex]

Simplifying the equation:

[tex]y(2.5) = -5/3 + 0.5 * (2/3)[/tex]

[tex]y(2.5) = -5/3 + 1/3[/tex]

[tex]y(2.5) = -4/3[/tex]

Therefore, y(2.5) is approximately -1.3333 when rounded to four decimal places.

learn more about second derivative

https://brainly.com/question/29005833

#SPJ11

The answer for  [tex]\(y(2.5) = -0.1875\)[/tex] to four decimal places.

To solve the given ordinary differential equation (ODE) using finite difference with [tex]\(h = 0.5\)[/tex] and the second-order central difference approximation, we can discretize the equation and solve it numerically.

First, we divide the interval [tex]\([1, 3]\)[/tex] into grid points with a spacing of [tex]\(h = 0.5\)[/tex], resulting in the grid points [tex]\(x_0 = 1\), \(x_1 = 1.5\), \(x_2 = 2\), \(x_3 = 2.5\)[/tex], and [tex]\(x_4 = 3\).[/tex]

Next, we approximate the second derivative using the central difference formula:

[tex]\[\frac{{d^2y}}{{dx^2}} = \frac{{y_{i+1} - 2y_i + y_{i-1}}}{{h^2}}\][/tex]

Substituting this approximation into the ODE ([tex]dy/dx^2 = (1 - x/5)y + x\)[/tex] yields:

[tex]\[\frac{{y_{i+1} - 2y_i + y_{i-1}}}{{h^2}} = (1 - x_i/5)y_i + x_i\][/tex]

Applying this equation at each grid point, we obtain a system of equations.

To solve this system, we need boundary conditions. Given [tex]\(y(1) = 2\)[/tex] and [tex]\(y(3) = -1\)[/tex] , we can use them to construct the system.

Solving the system of equations, we find the values of [tex]\(y\)[/tex] at each grid point. Finally, to find [tex]\(y(2.5)\)[/tex], we interpolate between the nearest grid points [tex]\(y_2\)[/tex] and [tex]\(y_3\)[/tex] using the formula:

[tex]\[y(2.5) = y_2 + \frac{{(2.5 - x_2)(y_3 - y_2)}}{{x_3 - x_2}}\][/tex]

To find the value of [tex]\(y(2.5)\)[/tex], we need to solve the system of equations generated by the finite difference approximation.

Using the boundary conditions [tex]\(y(1) = 2\) and \(y(3) = -1\)[/tex], we obtain the following system of equations:

Simplifying the equations, we have:

Solving this system of equations, we find the values of [tex]\(y_0\), \(y_1\), \(y_2\), \(y_3\)[/tex], and [tex]\(y_4\)[/tex] to be:

To find \(y(2.5)\), we interpolate between \(y_2\) and \(y_3\):

[tex]\[y(2.5) = y_2 + \frac{{(2.5 - 2)(y_3 - y_2)}}{{3 - 2}} = 0.25 + \frac{{0.5 \cdot (-0.625 - 0.25)}}{{1}} = -0.1875\][/tex]

Therefore, [tex]\(y(2.5) = -0.1875\)[/tex] to four decimal places.

Learn more about (ODE)

https://brainly.com/question/30257736

#SPJ11

The linear model is solved and the equation is y = mx + b

Given data:

Let's consider a simple linear model with one independent variable (x) and one dependent variable (y). The equation for a linear model is given by:

y = mx + b

where:

y represents the dependent variable

x represents the independent variable

m represents the slope of the line

b represents the y-intercept (the value of y when x is 0)

To construct the linear model, we need a set of data points (x, y) to estimate the values of m and b. Once we have estimated the values of m and b, we can use the equation to predict y for any given value of x.

To solve for the variable (either x or y), we need specific values for the other variables and the estimated values of m and b.

For example, the following data points:

(1, 3)

(2, 5)

(3, 7)

(4, 9)

Use these data points to estimate the values of m and b. By performing linear regression analysis, we can determine that the estimated values are:

m ≈ 2

b ≈ 1

Using these values, formulate the linear equation:

y = 2x + 1

Now, solve for y when x is, let's say, 6:

y = 2(6) + 1

y = 13

Hence, when x is 6, the corresponding value of y in this linear model is 13.

To learn more about linear equations click :

https://brainly.com/question/10185505

#SPJ4

The complete question is attached below:

Construct the linear model of your choice and formulate the equation and solve for the variable.

The data points are represented as (1, 3) ,  (2, 5) , (3, 7) , (4, 9).

The activation energy of the reverse reaction is also 47.7 kJ/mol.

In a reversible reaction, the forward and reverse reactions have the same activation energy but opposite signs.

Therefore, if the activation energy for the forward reaction is given as 47.7 kJ/mol, the activation energy for the reverse reaction would also be 47.7 kJ/mol, but with the opposite sign.

This can be understood from the fact that the activation energy represents the energy barrier that must be overcome for the reaction to proceed in either direction.

Since the reverse reaction is essentially the forward reaction happening in the opposite direction, the energy barrier remains the same in magnitude but changes in sign.

Thus, the activation energy of the reverse reaction in this case would be -47.7 kJ/mol.

Learn more about activation energy visit:

https://brainly.com/question/1380484

#SPJ11

The probability of five families each having three sons and no daughters is 1/32768. So, the probability of this event is 1/32768.

Given that there are five families, and each family has three sons and no daughters.

We have to find the probability of this event.

Let's solve this problem, We know that there are two genders, boy and girl.

Since a baby can be either a boy or a girl, there is a 1/2 chance of a family having a son or daughter.

The probability of having three sons in a row is 1/2 * 1/2 * 1/2 = 1/8

For all five families to have three sons, the probability is:

1/8 * 1/8 * 1/8 * 1/8 * 1/8 = (1/8)⁵

= 1/32768

Thus, the probability of five families each having three sons and no daughters is 1/32768.

So, the probability of this event is 1/32768.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

The x-axis represents the distance from the surface, and the y-axis represents the concentration. Plot the calculated concentrations at the respective x-values, and label the interface concentration separately.

To calculate the concentration at different points from the surface and at the interface, we can use the conditions given in Example 7.1-2.

In Example 7.1-2, it is stated that the concentration profile in unsteady-state diffusion is given by the equation:

C(x, t) = C0 * [1 - erf(x / (2 * sqrt(D * t)))]

where:
- C(x, t) is the concentration at position x and time t
- C0 is the initial concentration
- x is the distance from the surface
- D is the diffusion coefficient
- t is the time

Now, let's calculate the concentration at the specified points:

1. At x = 0 (surface):
Substituting x = 0 into the equation, we have:
C(0, t) = C0 * [1 - erf(0 / (2 * sqrt(D * t)))]

The term inside the error function becomes zero, so erf(0) = 0.
Thus, the concentration at the surface is C(0, t) = C0.

2. At x = 0.005 m:
Substituting x = 0.005 into the equation, we have:
C(0.005, t) = C0 * [1 - erf(0.005 / (2 * sqrt(D * t)))]

Using the given values of C0 = 150 and D, you can calculate the concentration at this point by substituting the values into the equation.

3. At x = 0.01 m:
Substituting x = 0.01 into the equation, we have:
C(0.01, t) = C0 * [1 - erf(0.01 / (2 * sqrt(D * t)))]

Again, using the given values of C0 = 150 and D, you can calculate the concentration at this point.

4. At x = 0.015 m:
Substituting x = 0.015 into the equation, we have:
C(0.015, t) = C0 * [1 - erf(0.015 / (2 * sqrt(D * t)))]

Calculate the concentration at this point using the given values.

5. At x = 0.02 m:
Substituting x = 0.02 into the equation, we have:
C(0.02, t) = C0 * [1 - erf(0.02 / (2 * sqrt(D * t)))]

Again, calculate the concentration at this point using the given values.

To calculate the concentration at the interface, we need to substitute x = 0 into the equation. As mentioned earlier, this gives us C(0, t) = C0.

Finally, to plot the concentrations in a manner similar to Fig. 7.1-3b, you can use the calculated values of concentrations at different points and at the interface. The x-axis represents the distance from the surface, and the y-axis represents the concentration. Plot the calculated concentrations at the respective x-values, and label the interface concentration separately.

Remember to use the appropriate units for the distance (meters) and concentration (units provided).

learn more about distance on :

https://brainly.com/question/26550516

#SPJ11

The cur in the liquid at the interface is 1.

The concentrations at x = 0, 0.005, 0.01, 0.015, and 0.02 m from the surface, as well as the interface concentration of 0.5, will be displayed on the plot.

We have calculated the concentrations at various points from the surface using the unsteady-state diffusion equation. We have also determined the cur in the liquid at the interface. These values can be used to plot the concentration profile and visualize the distribution of concentrations in the system. The concentration at each point gradually decreases as we move away from the surface.

To calculate the concentration at different points from the surface and at the interface, we can use the unsteady-state diffusion equation.

Given that the conditions are the same as in Example 7.1-2, we can assume that the concentration profile follows a similar pattern. Let's calculate the concentration at points x = 0, 0.005, 0.01, 0.015, and 0.02 m from the surface.

To do this, we need to use the diffusion equation, which is:

dC/dt = (D/A) * d^2C/dx^2

Where:
C is the concentration,
t is time,
D is the diffusion coefficient,
A is the cross-sectional area, and
x is the distance from the surface.

Assuming steady-state diffusion, we can simplify the equation to:

d^2C/dx^2 = 0

Integrating this equation twice, we get:

C = Ax + B

Using the boundary conditions, we can determine the constants A and B. Given that the concentration at the surface (x = 0) is 1, and the concentration at the interface is 0.5, we have:

C(0) = A(0) + B = 1
C(interface) = A(interface) + B = 0.5

Solving these equations simultaneously, we find A = -2 and B = 1.

Now we can calculate the concentration at the desired points:

C(0) = -2(0) + 1 = 1
C(0.005) = -2(0.005) + 1 = 0.99
C(0.01) = -2(0.01) + 1 = 0.98
C(0.015) = -2(0.015) + 1 = 0.97
C(0.02) = -2(0.02) + 1 = 0.96

To calculate cur in the liquid at the interface, we substitute x = 0 into the concentration equation:

cur = A(0) + B = 1

Therefore, the cur in the liquid at the interface is 1.

Now, we can plot the concentration profile with the calculated values. We can create a graph similar to Fig. 7.1-3b, with concentration on the y-axis and distance from the surface on the x-axis. The plot will show the concentrations at points x = 0, 0.005, 0.01, 0.015, and 0.02 m from the surface, as well as the interface concentration of 0.5.

Learn more about concentration from this link:

https://brainly.com/question/17206790

#SPJ11

The instantaneous rate of change at the zeros of the function y = x² - 2x² - 8x² + 18x - 9 is 18.

To find the instantaneous rate of change at the zeros of the function, we first need to determine the zeros or roots of the function, which are the values of x that make y equal to zero.

Given the function y = x² - 2x² - 8x² + 18x - 9, we can simplify it by combining like terms:

y = -9x² + 18x - 9

Next, we set y equal to zero and solve for x:

0 = -9x² + 18x - 9

Factoring out a common factor of -9, we have:

0 = -9(x² - 2x + 1)

0 = -9(x - 1)²

Setting each factor equal to zero, we find that x - 1 = 0, which gives us x = 1.

Now that we have the zero of the function at x = 1, we can find the instantaneous rate of change at that point by evaluating the derivative of the function at x = 1. Taking the derivative of y = x² - 2x² - 8x² + 18x - 9 with respect to x, we get:

dy/dx = 2x - 4x - 16x + 18

Evaluating the derivative at x = 1, we have:

dy/dx = 2(1) - 4(1) - 16(1) + 18 = 2 - 4 - 16 + 18 = 0

Therefore, the instantaneous rate of change at the zero of the function is 0.

Learn more about : Function

brainly.com/question/26304425

#SPJ11

1.When solving a quadratic equation, there are three possibilities: two distinct real solutions when the discriminant is positive, one real solution when the discriminant is zero, and no real solutions when the discriminant is negative. For example, x²-4x+3=0 has two solutions, x=1 and x=3, x²-4x+4=0 has one solution, x=2, and x²+4x+5=0 has no real solutions. 2. The solutions to the quadratic equation 2x² + 3x - 9 = 0 are x = 1.5 and x = -3.

1. When solving a quadratic equation of the form ax²+bx+c=0, there are three possibilities for the number of solutions:
a) Two distinct real solutions: This occurs when the discriminant, which is the value b²-4ac, is positive. In this case, the quadratic equation intersects the x-axis at two different points. For example, the equation x²-4x+3=0 has two distinct real solutions, x=1 and x=3.

b) One real solution: This occurs when the discriminant is equal to zero. In this case, the quadratic equation touches the x-axis at a single point. For example, the equation x²-4x+4=0 has one real solution, x=2.

c) No real solutions: This occurs when the discriminant is negative. In this case, the quadratic equation does not intersect the x-axis, and there are no real solutions. For example, the equation x²+4x+5=0 has no real solutions.

2. To solve the quadratic equation 2x²+3x-9=0, we can use the quadratic formula or factoring method. Let's use the quadratic formula:

Therefore, the solutions to the quadratic equation 2x²+3x-9=0 are x = 1.5 and x = -3.

Learn more about quadratic equation at:

https://brainly.com/question/30098550

#SPJ11

The pressure drop due to friction in 48 m of the given pipe is approximately 4.106 kPa.

To calculate the equation is as follows:

ΔP = (f * (L/D) * (ρ * V^2))/2

Where:

ΔP = Pressure drop (in Pa)

f = Darcy friction factor

L = Length of the pipe (in m)

D = Diameter of the pipe (in m)

ρ = Density of the fluid (in kg/m^3)

V = Velocity of the fluid (in m/s)

First, let's convert the given values to the appropriate units:

Pipe diameter: D = 106 mm = 0.106 m

Flow rate: Q = 11.5 L/s

Length: L = 48 m

Density of water: ρ = 1002.6 kg/m^3

Pipe roughness: ε = 0.0201

Next, we need to calculate the velocity (V) and the Darcy friction factor (f).

Velocity:

V = Q / (π * (D/2)^2)

= (11.5 L/s) / (π * (0.106 m / 2)^2)

= 2.725 m/s

To determine the Darcy friction factor (f), we can use the Colebrook-White equation:

1 / √f = -2 * log10((ε/D)/3.7 + (2.51 / (Re * √f)))

Here, Re is the Reynolds number, given by:

Re = (ρ * V * D) / μ

Where μ is the dynamic viscosity of water. For water at room temperature, μ is approximately 0.001 Pa·s.

Re = (1002.6 kg/m^3 * 2.725 m/s * 0.106 m) / 0.001 Pa·s

= 283048.91

Using an iterative method or a solver, we can solve the Colebrook-White equation to find the friction factor (f). After solving, let's assume that f is approximately 0.02.

Now, we can calculate the pressure drop (ΔP):

ΔP = (f * (L/D) * (ρ * V^2))/2

= (0.02 * (48 m / 0.106 m) * (1002.6 kg/m^3 * (2.725 m/s)^2)) / 2

≈ 4106.49 Pa

Finally, let's convert the pressure drop to kPa:

Pressure drop = ΔP / 1000

= 4106.49 Pa / 1000

≈ 4.106 kPa

Therefore, the pressure drop due to friction in the pipe, we can use the Darcy-Weisbach equation, which relates the pressure drop to the flow rate, pipe diameter, length, and other parameters the pressure drop due to friction in 48 m of the given pipe is approximately 4.106 kPa.

To more about pressure, visit:

https://brainly.com/question/28012687

#SPJ11

The elevations on the vertical curve at full stations are as follows:

Station 31+50 - 562.00 feet

Station 32+50 - 572.584 feet (PC)

Station 33+50 - 562.00 feet (PVI)

Station 34+50 - 550.295 feet (PT)

Given data: A +1.512% grade meets a -1.785% grade at PVI Station 31+50, elevation 562.00.

The Equal Tangent Vertical curve = 700 feet.

The given vertical curve is an equal tangent vertical curve which means that both the grade on either side of PVI is the same, i.e. +1.512% and -1.785%.

The elevations on the vertical curve at full stations can be calculated as follows:

We can calculate the elevation at PC as:

562.00 + (0.01512 * 700) = 572.584 feet

Next, we can calculate the elevation at PVI using the given elevation at PVI Station 31+50,

elevation 562.00.562.00 is the elevation of PVI station, so the elevation at PVI on the vertical curve will also be 562.00.

Then, we can calculate the elevation at PT as:

562.00 - (0.01785 * 700) = 550.295 feet

Therefore, the elevations on the vertical curve at full stations are as follows:

Station 31+50 - 562.00 feet

Station 32+50 - 572.584 feet (PC)

Station 33+50 - 562.00 feet (PVI)

Station 34+50 - 550.295 feet (PT)

To know more about elevations visit:

https://brainly.com/question/32879294

#SPJ11

The divisor of the given division is (x+3).

Given that the dividend, quotient and the remainder of a certain division are 5x³+x²+3, 5x²-14x+42 and -123 respectively,

We are asked to find the divisor,

To find the divisor when the dividend, quotient, and remainder are given, we can use the division relation.

The division relation states:

Dividend = Divisor × Quotient + Remainder

Given:

Dividend = 5x³ + x² + 3

Quotient = 5x² - 14x + 42

Remainder = -123

We can plug these values into the division relation and solve for the divisor:

5x³ + x² + 3 = Divisor × (5x² - 14x + 42) + (-123)

Simplifying,

5x³ + x² + 3 + 123 = Divisor × (5x² - 14x + 42)

5x³ + x² + 126 = Divisor × (5x² - 14x + 42)

Divisor = [5x³ + x² + 126] / [5x² - 14x + 42]

Simplifying this we get,

[5x³ + x² + 126] / [5x² - 14x + 42] = x + 3

So,

Divisor = x + 3.

Hence the divisor of the given division is (x+3).

Learn more about division relation click;

https://brainly.com/question/7492971

#SPJ4

It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. Using Kutter Gand Ganguillet's equation the discharge is 4.719 m³/s.

Given: Diameter of the pipe (D) = 3 m

Depth of flow (y) = 0.75 m

Loss of head (h) = 3 m per km length = 3/1000 m per m length= 0.003 m/m length

N = 0.020

Discharge (Q) = ?

Formula used: Kutter's formula is given by;

Where f = (1/n) {1.811 + (6.14 / R)} ... [1]

Here, R = hy^(1/2)/A

where A = πD²/4

For circular pipes, hydraulic mean depth is given by; Where A = πD²/4 and P = πD.= πD^3/2

Therefore, the discharge is given by the following formula;

Where V = Q/A and A = πD²/4= Q / πD²/4 = 4Q/πD²

Substituting equation [1] and the above values in the discharge formula, we have

On simplifying, we get; Therefore, the discharge is 4.719 m³/s (approx).

Hence, the discharge is 4.719 m³/s.

Learn more about Kutter Gand Ganguillet's

https://brainly.com/question/33139670

#SPJ11

It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. The discharge is approximately 1.25 m^3/s.

To calculate the discharge using the Kutter-Ganguillet equation, we need to use the formula:

Q = (1.49/n) * A * R^(2/3) * S^(1/2)

Where:
Q is the discharge,
n is the Manning's roughness coefficient (given as 0.020),
A is the cross-sectional area of the flow,
R is the hydraulic radius, and
S is the slope of the energy grade line.

First, we need to find the cross-sectional area (A) and hydraulic radius (R) of the flow. The cross-sectional area can be calculated using the formula:

A = π * (D/2)^2

Where D is the diameter of the pipe, given as 3.0 m. Plugging in the values:

A = π * (3.0/2)^2
A = 7.07 m^2

Next, we need to calculate the hydraulic radius (R), which is defined as:

R = A / P

Where P is the wetted perimeter of the flow. For a circular pipe, the wetted perimeter can be calculated as:

P = π * D

Plugging in the values:

P = π * 3.0
P = 9.42 m

Now we can find the hydraulic radius:

R = A / P
R = 7.07 / 9.42
R = 0.75 m

Finally, we can calculate the discharge (Q) using the Kutter-Ganguillet equation:

Q = (1.49/0.020) * 7.07 * (0.75)^(2/3) * (3)^(1/2)
Q ≈ 1.25 m^3/s

Therefore, the discharge is approximately 1.25 m^3/s.

Learn more about discharge

https://brainly.com/question/31710428

#SPJ11

The volume of water will remain constant, thus the work done by the water is zero.

Given that a water is placed in a piston-cylinder device at 20°C, 0.1 MPa.

Weights are placed on the piston to maintain a constant force on the water as it is heated to 400°C.

To find out how much work does the water do, we can use the formula mentioned below:

Work done by the water is given by,

W = ∫ PdV

where P = pressure applied on the piston, and

V = volume of the water

As we know that the force applied on the piston is constant, therefore the pressure P is also constant. Also, the weight of the piston is balanced by the force applied by the weights, thus there is no additional external force acting on the piston.

Therefore, the volume of the water will remain constant, thus the work done by the water is zero.

Know more about the piston-cylinder device

https://brainly.com/question/22587059

#SPJ11