the Particle Neutron is discovered by James Chadwick and as it was the neutral particle he named it so to be neutron. The proton was discovered by Ernest Rutherford and he named his discovery as protons which is based on a Greek word "protos" which means 'First'.
What is Neutron?Neutron is the neutral particle present in the nucleus of an atom with same mass as of protons. It doesn't posses any charge on it.
Proton:Proton is the positively charged particle present in the nucleus of an atom with Neutron. Protons and neutron both have same masses but they differ in their nature.
To know more about Neutron visit
https://brainly.com/question/15240353
#SPJ1
Before John Dalton's extraordinary theory, there were other speculations that focused on the components of mass. The subatomic particles that create various sorts of atoms were eventually understood by the scientists. The laws of mass conservation, multiple proportions, and constant composition were all fully established by this theory for the first time. The scientists subsequently made the discovery of three subatomic particles. Numerous more significant discoveries were prompted by the discovery of the electron, proton, and neutron.
Atoms make up matter. A large number of subatomic particles make up one atom. We shall learn who made the discovery of electron protons and neutrons in this section. Each subatomic particle was found as a result of a different series of experiments. Nuclear Physics and its different branches were founded as a result of these revolutionary discoveries made in the 19th and 20th centuries.
To comprehend the physical characteristics of these subatomic particles, it is essential to grasp how the scientists carried out these studies. Discovering how electron proton neutrons are identified by differentiating their characteristics will captivate you.
How Was the Electron Found?
The subatomic particle that is still present outside of the nucleus is an electron. The electromagnetic force of attraction holds it in place. The strong force retains an electron in its orbit despite the enormous distance between it and a nucleus. In the year 1885, Sir William Crookes made the discovery of the electron.
He heated metallic electrodes in a vacuum to conduct a number of tests. He was carrying out tests to examine how metals behave when heated in a vacuum. He had partially evacuated the glass tube in which he was heating the electrodes. A stream of extremely charged particles was seen moving from the negative electrode, or cathode, to the positive electrode of the anode when a high-voltage source was connected to the electrodes.
Crooks observed that these particles moved straight along in the absence of any external magnetic or electric fields. The subsequent investigations carried out by the other scientists led to the conclusion of a set of characteristics of these particles. An outstanding physicist named Sir J. J. Thompson created electrons and improved their physical properties.
How were protons discovered?
A perforated cathode was being used in experiments by Eugen Goldstein, who discovered protons (negative electrode). Although there is air within a glass tube with the electrodes in it, the pressure is quite low. In 1886, he tried. The electron was not found and named during this period. He crossed the electrodes with a high voltage. In that tube, he noticed a crimson glow behind the cathode. This ray was created by electrons moving in the opposite direction to that of cathode rays.
Goldstein thus unintentionally found the proton. Then, the same experiment was carried out on anodes, causing another ray to flow. When there was no electrical or magnetic field present, the particles this time possessed a large mass but still moved straight. It has been effectively explained how these subatomic particles formed in the ray.
Compared to electrons, these particles are significantly heavier. Even when different metals were employed for the same experiment, the charge to mass ratio (e/m) remained constant. Moving on, Rutherford was able to demonstrate that the hydrogen ion (H+), created in 1919 when a hydrogen atom lost an electron, shared the same characteristics as the positive particles moving and creating rays.
Finding of the Neutron After World War I
James Chadwick visited his instructor Ernest Rutherford in England. Under Rutherford's guidance, he finished his doctoral work and focused his investigations on radioactive decay. Rutherford discovered protons in atoms, but Chadwick discovered that protons weren't the only subatomic particles that might be found inside an atom's nucleus.
He then carried out his atomic disintegration experiments and discovered that while helium has an atomic number of 2, it has a mass number of 4. He came to the conclusion that only protons can contain two electrons in a helium atom after conducting a number of further experiments. As a result, other subatomic particles with a proton's mass did not carry a charge. Despite being neutral, these particles had mass. He earned the Nobel Prize in 1935 for his discovery of neutrons.
To learn more about Discoveries of protons, neutrons, and electrons
brainly.com/question/15240353
#SPJ1
A piece of wood from an ancient Egyptian tomb is tested for its carbon-14 activity. It is found to have an activity per gram of carbon of A=10decay/min⋅gA=10decay/min⋅g. Carbon-14 has an initial activity of 15decay/min⋅g15decay/min⋅g and a half-life of 5730 years. In years, what is the age of wood?
The age of wood 2880 years.
What are tombs from ancient Egypt?People who passed away would be interred in the tombs of the Ancient Egyptians.This was significant to the Egyptians because they held the view that as long as a person was properly buried in their tomb, life remained even after death.
What other name would you give an Egyptian tomb?The sarcophagus was intended to serve as the occupants' eternal home in the afterlife, according to ancient Egyptian belief.Pharaohs and rich citizens' sarcophagi were ornately decorated with carvings and painting.
To know more about ancient Egyptian tomb visit:
https://brainly.com/question/224985
#SPJ4
write the formula for compounds formed from these pairs of ions. a) nh4 , so32- b) calcium ion, phosphate ion
The compound that is formed from the combination of NH₄⁺ and SO₃²⁻ is (NH₄)₂SO₃ and the compound that is formed from the combination calcium ion and phosphate ion is Ca₃(PO₄)₂.
Definition of Ionic bond
A bond that is formed by the complete transfer of some electrons from one atom to another is known as an ionic bond. The atom which loses one or more electrons becomes a cation—a positively charged ion. The atom which gains one or more electron becomes an anion—a negatively charged ion.
The term "ionic bonding" is given "when the ionic character is greater than the covalent character".
Learn more about ionic bond from the link given below.
https://brainly.com/question/1747704
#SPJ4
The enthalpy change for the following reaction is -318 kJ. Using bond energies, estimate the O-F bond energy in OF2(g). OF2(g) + H2O(g) -> O2(g) + 2HF(g)
The enthalpy change for the following reaction is -318 kJ. Using bond energies, estimate the O-F bond energy in OF₂(g).
OF₂(g) + H₂O(g) -> O₂(g) + 2HF(g) is 190 kJ /mol.
The reaction is given as :
F - O - F + H - O - H -----> O = O + 2H - F
moles bond energy
bond broken H - O 2 463 kJ/mol
bond broken O - F 2 ?
bond form O = O 1 498 kJ/mol
broken form H - F 2 565 kJ/mol
enthalpy change = BE ( bond broken ) - BE (bond form )
- 318 = (2 (O - F) + 2(463) - (( 498 ) + 2( 565))
- 318 = 2 (O - F) - 698
2 (O - F) = 380
(O - F) = 190 kJ /mol
To learn more about enthalpy change here
https://brainly.com/question/14286181
#SPJ4
1000 mg vanco in 250ml of d5w over 2 hrs. what is the drip rate ?
There is 1000 mg Vanco in 250 ml of 5w over 2 hrs. The drip rate of Vanco is 125 ml/hr.
What is the drip rate?Drip rate is a term used to describe the rate of an intravenous infusion depending on the number of drops (gtt) given to the patient each minute.
To conduct this calculation, you must know the total volume to be infused in milliliters, as well as the infusion time. Use the following formula.
To calculate the drip rate. The volume of the medicine is divided by the number of hours.
Given, the number of hours = 2 hrs
The volume of the Vanco is = 250ml
250 / 2 = 125 ml/hr
Therefore, the drip rate is 125 ml/hr.
To learn more about drip rate, refer to the link:
https://brainly.com/question/16544112
#SPJ1
Which of the following statements concerning a face- centered cubic unit cell and the corresponding lattice, made up of identical atoms, is incorrect? A. If the atoms have radius r, then the length of the cube edge is √8 times f. B. The close-packed direction lies along the face diagonal of the unit cell. C. The coordination number of the atoms in the lattice is V8. D. There are four atoms per unit cell in this type of packing. E. All statements are correct.
A. If the atoms have radius r, then the length of the cube edge is √8 times f statements concerning a face- centered cubic unit cell and the corresponding lattice, made up of identical atoms, is incorrect.
How effectively does the FCC crystal structure pack?74% of the FCC lattice's space is used for packing. Let n be the number of atoms or spheres, where n is equal to 4, and let r be the radius of the sphere and a be the length of the cube's edges.
A face-centered cubic unit cell structure is made up of atoms organized in a cube with a fraction of an atom at each corner and six extra whole atoms at the center of each cube face.
In this unit cell, there are 14 lattice points, eight of which are corner atoms while the remaining six are located in the middle of each face.
learn more about face-centered cubic refer
https://brainly.com/question/17111818
#SPJ4
throughout the extraction steps of this week's oxidation reaction procedure, which of the following compound(s) is/are present in the bottom layers? group of answer choices sodium acetate sodium chloride and sodium acetate 9-fluorenone sodium chloride
The organic phase is a solvent, usually dichloromethane or diethyl ether, that disperses very little in water. The 9-fluorenone was dried, isolated, and saltified with sodium sulfate.
What are the three primary types of extraction techniques?There are a number of extraction processes, including solvent extraction, distillation, pressing, and sublimation, that can be used. Solvent extraction is the method that is most frequently used.
What kind of extraction is most typical?extracting liquid from liquid When a substance is "extracted," it is moved from a solid or liquid into a separate solvent or phase. The method most frequently used in chemical labs is liquid-liquid extraction, which takes place in a separatory funnel.
To know more about Sodium visit:-
https://brainly.com/question/29327783
#SPJ4
Pancreatic amylase is digestive enzyme found in the small intestine: It helps break down large starch molecules later in the digestive process Pancreatic amylase is unable to break down lipids Which of the following best explains why pancreatic amylase is able to break down starches, but not lipids? enzymes bind only to their specific substrates lipids are too hydrophobic to be broken down by enzymes. enzymes denature in the presence of lipids lipids are too small to bind to enzymes
Pancreatic amylase is able to break down starches, but not lipids because enzymes bind only to their specific substrates.
Pancreatic amylase is the enzyme secreted by pancreas. One of the important features of all the types of enzymes is the substrate specificity. It ensures that enzyme perform the chemical reaction they are specifically intended to do.
We also see salivary amylase secretion in the mouth which begins the breakdown process of our food. It is again directed towards carbohydrates for instance starch. Lipids are digested by emulsification and proteins are digested by breakdown through peptidases.
Learn more about enzymes -
https://brainly.com/question/1596855
#SPJ4
Density is a common physical property of substances that can give insight into the structure of the substance on the atom or molecular level. You are attempting to measure the thickness of a rectangular piece of aluminum found at a crime scene, but it is too thin for your ruler. You know density has units of g/mL, and you recall mL is the same as cm?. Sooo...why not use the volume of the metal, the length and height? to find the volume by water displacement, you lower the sample into a graduated cylinder with an initial volume of water of 32.9 ml. the volume of water rises to 48.1 ml. you also mass the sample and determine it to be 20.28 g. finally, you measure the length of the solid to be 6.5 cm and the height to be 5.1 cm. from this information determine the thickness of the metal rectangular solid(mm).
The length of the solid to be 6.5 cm and the height to be 5.1 cm. the thickness of the metal rectangular solid(mm) is 4.58 mm.
given that :
height of solid = 5.1 cm
length of solid = 6.5 cm
the initial volume of graduated cylinder = 32.9 mL
the final volume of graduated cylinder = 48.1 mL
the volume of the solid = 48.1 - 32.9
= 15.2 mL = 15.2 cm³
the volume expression for the solid is given as :
volume = length × width × height
15.2 cm³ = 6.5 cm × width × 5.1
width = 15.2 / 33.15
Width = 0.458 cm = 4.58 mm
Thus, the thickness of metal = 4.58 mm
To learn more about graduated cylinder here
https://brainly.com/question/23122699
#SPJ4
Which of the following coenzymes participate in the reactions of the pyruvate dehydrogenase complex? 1. thiamine pyrophosphate (TPP) 2. lipoic acid (lipoamide) 3. Flavin adenine dinucleotide (FAD) 4. Nicotinamide adenine dinucleotide (NAD) 5. Coenzyme A (CoA) View Available Hint(s)All of the listed coenzymes participate. O Only 1,2, and 4 participate. O Only 1,2, and 3 participate. O Only 1, 3, and 5 participate. Submit
The right answer is E.
The decarboxylation of pyruvate to acetyl-CoA and the production of NADH and CO2 are irreversible reactions that are catalyzed by the multi-enzyme complex known as pyruvate dehydrogenase. Pyruvate is introduced into the TCA cycle through the complex.
Two regulatory enzymes, three catalytic enzymes, and a binding protein make up the enzyme complex. There are three enzymes:
1. Thiamine pyrophosphate (TPP) is used as the prosthetic group by pyruvate dehydrogenase (E1).
2. Dihydrolipoyl transacetylase (E2), which has as its prosthetic groups coenzyme A and lipoamide.
3. Nicotinamide adenine dinucleotide (NAD+) and flavin adenine dinucleotide (FAD) serve as cofactors for dihydrolipoyl dehydrogenase (E3).
Hence, The correct response is option E since E2 needs coenzyme A as one of its co-factors.
To learn more about Enzymes click on the link
https://brainly.com/question/1596855
#SPJ4
For the molecule, GeO2, determine its Lewis structure, bonding pairs/lone pairs, electron geometry, its shape, and whether or not the molecule is polar.
The correct answers to the problem given above about germanium IV oxide are as follows:
a. The Lewis structure of the molecule; GeO₂ simply is O = Ge = Ob. The bonding pairs/lone pairs of the molecule GeO₂ are two bond electron pairs and four electrons respectively.c. The electron geometry of GeO₂ is linear geometry d. The shape of germanium IV oxide is α-quartz type hexagonal structuree. Germanium oxide is a polar molecule.What is meant by GeO₂GeO₂ is a chemical compound also known as germanium oxide, germanium dioxide or germanium IV oxide. It is a polar covalent which is a soluble substance to some extent.
In conclusion, it can be deduced from the explanation given above that germanium IV oxide is a chemical compound.
The complete lewis structure of germanium IV oxide is attached.
Complete question:
Answer the following questions about germanium IV oxide, GeO₂
a. Determine its lewis structure.
b. Its bonding pairs/lone pairs
c. What is its electron geometry (GeO₂)?
d. Its shape (GeO₂)?
e. Is germanium IV oxide a polar or non-polar molecule?
Read more on lewis structure:
https://brainly.com/question/11554350
#SPJ1
URGENT/
Drag the tiles to the correct locations. Each tile can be used more than once, but not all tiles will be used. Some locations will remain empty.
Chloramine has the chemical formula NH2Cl. Nitrogen has five valence electrons, each hydrogen has one valence electron, and chlorine has seven valence electrons. Complete the Lewis structure for this covalent compound.
The lewis structure of Chloamine can be given as above.
What is Covalent Compound?If one element shares electron with another elements to form bond. This is called as covalent bond. The compound which contain Covalent bond called Covalent compound.
What is Nitrogen atom?Nitrogen is one of the elements of periodic table. It has 7 as atomic number and 14 as mass number. Its electronic configuration is 1s2 2s2 2p3. It belongs to 15th group and 2nd period of the periodic table. It accept three electron to get stable electronic configuration.
As we know that, chloramine has the chemical formula NH2Cl. Nitrogen has five valence electrons, each hydrogen has one valence electron, and chlorine has seven valence electrons.
Thus, we concluded that Nitrogen form three single bond two with hydrogen and one with chlorine atom.
learn more about lewis structure:
https://brainly.com/question/20300458
#SPJ1
If an ideal gas has a pressure of 1.11atm, a temperature of 40.04°C, and a volume of 76.87L, how many moles of gas are in the sample?
n=? mol
The numbers is moles in the gas sample is 0.032
Since we know that the I deal gas equation is
PV=nRT
where ,
P is pressure
V is volume
n is no. of moles
R is gas constant (8.3145 J⋅mol^−1⋅K^−1)
T is temperature ( in Kelvin)
P =1.11 atm
T = 40.04 + 273
= 313.04 K
V= 76.87L
substituting the given values in the ideal gas equation we get,
1.11x76.87=n x 8.3145 x 313.04
n=(1.11x76.87)/(8.3145x313.04)
n=0.032
Hence the moles in the sample are 0.032 .
To know more about ideal gas equation,
https://brainly.com/question/16109961
What volume in milliliters of CO gas would be produced by the complete reaction of 2.40 g of C solid at STP according to the following reaction? Remember 1 mol of an ideal gas has a volume of 22.4 L at STP.
C(s) + H₂O(g) → CO(g) + H₂(g)
How do i start the equation we need the stoichometry to do this
Answer: 4480 mL
Explanation:
2.40 grams of C is equal to [tex]2.40/12.011=0.19981683456831[/tex] moles of C.
From the reaction equation, for every mole of C consumed, one mole of CO is produced.
This means that 0.19981683456831 moles of CO are produced.
Therefore, the volume in milliliters is [tex](0.19981683456831)(22.4)(1000)=4480[/tex] mL.
The volume of CO gas produced by the complete reaction of 2.40 g of C solid at STP is approximately 4.47 L (or 4470 milliliters).
To calculate the volume of CO gas produced, we first need to determine the number of moles of C reacting. Given that 2.40 g of C is provided, we can convert this mass to moles using the molar mass of carbon (12.01 g/mol).
Moles of C = Mass of C / Molar mass of C
Moles of C = 2.40 g / 12.01 g/mol
Moles of C ≈ 0.1998 mol
Now, we use stoichiometry from the balanced chemical equation to find the number of moles of CO produced. From the equation, the molar ratio between C and CO is 1:1.
Moles of CO = Moles of C
Moles of CO ≈ 0.1998 mol
Finally, we use the ideal gas law at STP (22.4 L/mol) to calculate the volume of CO gas:
Volume of CO gas = Moles of CO * 22.4 L/mol
Volume of CO gas ≈ 0.1998 mol * 22.4 L/mol
Volume of CO gas ≈ 4.47 L
So, the volume of CO gas produced by the complete reaction of 2.40 g of C solid at STP is approximately 4.47 L (or 4470 milliliters).
To learn more about stoichiometry here
https://brainly.com/question/18382922
#SPJ2
A gas is transported in a horizontal pipeline at a flow of 10.000 lb.„/min. If it is moving at 10 ft.'s, what rate of work (in horsepower) must be performed on the gas to increase its velocity to 200 ft/s at the same temperature and pressure (I hp 550
A gas is transported in a horizontal pipeline at a flow of 10.000 lb.„/min. If it is moving at 10 ft.'s, -6045 HP rate of work (in horsepower) must be performed on the gas to increase its velocity to 200 ft/s at the same temperature and pressure
What is rate of work?This equation may be used to compute work: Work equals Force x Distance. The Newton metre is the SI unit for work (N.m). One joule is the amount of work done when one Newton of force pushes an item one metre.
Because the force transmits one unit of energy when it does one unit of work, the rate of accomplishing work equals the rate of utilising energy. A horsepower is equivalent to 550 foot pounds per second, while a kilowatt is equal to 1000 watts.
Given that,
A gas is transported in a horizontal pipeline at a flow of 10.000 lb/min
m = (10000÷60) lb/sec
m = 166.67 lb/sec
and, v₁ = 10 ft/sec
v₂ = 200 ft/sec
Now,
or, m [(v₂² - v₁²)/2] = - w
or, w = m/2 × [(v₁² - v₂²)]
or, w = 166.67/2 × [(10)² - (200)²]
or, w = -3325000 lb. ft².s⁻¹
or, w = -3325000 / 550 HP
or, w = -6045 HP
To know more about rate of work refer to:
https://brainly.com/question/169382
#SPJ1
predict which aqueous solution will have the lowest freezing point
A. 0.25MOL/LITER SUCROSE
B. 0.15 MOL/LCaCl2
C. 0.15MOL/LNaCl
D. 0.2MOL/LNaNO3
CaCl₂ has lowest freezing point as it has higher "im" value.
What is freezing point?A solution's freezing point is lower than that of the pure solvent's. It follows that freezing cannot happen until a solution is lowered to a temperature lower than the pure solvent.
As we know more "im" value lowest is the freezing point.
Here,
m = molarity
i = van't Hoff factor = 1 + (n-1) α
α = degree of ionization
n = number of ions.
A. 0.25 MOL /LITER SUCROSE = 0.25 M SUCROSE
m = 0.25 M
Sucrose is non-electrolyte, so α = 0
or, i = 1 + (n-1) × 0
or, i = 1
So, im = 1 × 0.25 M
im = 0.25 M
B. 0.15 MOL/L CaCl₂ = 0.15 M CaCl₂
m = 0.15 M
CaCl₂ → Ca⁺² + 2Cl⁻
no. of ions (n) = 3
CaCl₂ is electrolyte, so α = 1
Thus, i = 1 + (3-1) × 1
or, i = 3
So, im = 3 × 0.15 M
or, im = 0.45 M
C. 0.15 MOL/L NaCl = 0.15 M NaCl
m = 0.15 M
NaCl → Na⁺ + Cl⁻
no. of ions = 2
NaCl is electrolyte, so α = 1
Thus, i = 1 + (2-1) × 1
or, i = 2
So, im = 2 × 0.15 M
or, im = 0.30 M
D. 0.2 MOL/L NaNO₃ = 0.2 M NaNO₃
m = 0.2 M
NaNO₃ → Na⁺ + NO₃⁻
no. of ions = 2
NaNO₃ is electrolyte, so α = 1
Thus, i = 1 + (2-1) × 1
or, i = 2
So, im = 2 × 0.2 M
or, im = 0.40 M
Among these four aqueous solution, CaCl₂ has higher "im" value thus it has lowest freezing point.
Correct option: B
To know more about freezing point refer to:
https://brainly.com/question/27184453
#SPJ1
A pregnant client experienced preterm labor at 30 weeks gestation. Upon assessing the client the nurse finds that the newborn is at risk of having cerebral palsy. Which medication administration should the nurse perform to prevent cerebral palsy in the newborn?
A. Calcium gluconate.
B. Magnesium sulfate.
C. Glucocorticoid drugs.
D. Antibiotic medications
The medicine that has to be given by the nurse to prevent cerebral palsy in the new-born is magnesium sulphate.
The term "cerebral palsy" refers to a collection of conditions that impair mobility and posture development and are thought to be caused by non-progressive abnormalities. Insults that caused cerebral palsy are thought to have happened during foetal development or early childhood. A significant risk factor for cerebral palsy is preterm delivery, and that risk rises sharply as gestational age decreases. Right now, 25% of all new occurrences of cerebral palsy are caused by babies delivered before 34 weeks of pregnancy. Cerebral palsy risk is higher when there are several pregnancies. MgSO4 was infused continuously at a rate of 2 g/h for up to 12 hours after a 6 g loading dose. Given before delivery, magnesium sulphate is known to regulate the vasculature and minimize hypoxia effects by neutralising cytokine or excitatory amino acid damage, which may lower the risk.
To know more about pregnancy visit:
https://brainly.com/question/26430164
#SPJ4
what is the density of a box that is 2cm x 4cm x 10cm and has a mass of 120g
Answer:
To find the density of a box, you will need to divide its mass by its volume. The density of an object is a measure of how much mass is contained in a given volume.
The volume of the box can be calculated by multiplying its length, width, and height:
volume = 2 cm x 4 cm x 10 cm = 80 cm^3
To find the density of the box, you will need to divide its mass by its volume:
density = mass / volume
= 120 g / 80 cm^3
= 1.5 g/cm^3
Therefore, the density of the box is 1.5 g/cm^3.
Determine the mass in grams of 7.68 x 10^21 atoms of carbon. (The
mass of one mole of carbon is 12.01 g.)
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, the mass in gram of 7.68 x 10²¹atoms of carbon is 0.152g.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole.
we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number
mole =given number of atoms ÷ 6.022×10²³(Avogadro number)
given number of atoms of carbon=7.68 x 10²¹atoms
Substituting the values
mole= =7.68 x 10²¹÷ 6.022×10²³
mole = 0.0127moles of carbon
number of moles of carbon=given mass of carbon÷ molar mass of carbon
Substituting the values
0.0127= mass of carbon÷12.01g
mass of carbon= 0.152g
Therefore, the mass in gram of 7.68 x 10²¹atoms of carbon is 0.152g.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
Question 2(Multiple Choice Worth 2 points)
(01.02 MC)
A team of researchers is working on a project to make a new kind of carbonless fuel. During their experiment, there is an explosion that destroys the lab. While they
are cleaning the debris, they discover three pieces of frozen metal. The researchers were excited to report that they had discovered a fuel that burns so clean it
becomes cold. Which statement best explains why this scenario represents "bad" science?
O The frozen metal was discovered through biased research practices.
O The clean fuel experiment lacks controlled variables due to the explosion.
O
The experiment is replicable because the testing conditions are included.
O
The result of clean fuel production, the frozen metal, is not observable.
They shouldn't have made a choice based on the frozen metals because scientific research is based on accepted procedures, not on personal bias.
Briefing:
A researcher that is biased is unable to look at experimental observations objectively before drawing any conclusions. Bias is the biggest trap that needs to be avoided when performing a scientific investigation.
When there is a discrepancy between the observation and interpretation of data in a scientific investigation, a bias is introduced.
In the instance of this inquiry, the researchers were already interested in determining whether it was possible to obtain a fuel without carbon. They reached a lobe-sided, unscientific conclusion because they forgot to fully study the chunks of frozen metal since their brains were so clouded by this bias.
To know more about metals, visit:
https://brainly.com/question/29404080
#SPJ1
weather is created by differences in ________and________
Weather is created by differences in air pressure and temperature and moisture.
What causes weather?Six main factors make up the weather. These include the following: temperature, atmospheric pressure, the development of clouds, wind, and precipitation. A minor modification to any of these elements may result in a new weather pattern. Every variation in the weather has a cascading effect that affects everyone on the planet.
The sun only warms half of Earth at a time, leaving the other side in shadow. As a result, the sun heats the surface of the Earth unevenly each day, heating some areas more than others. Winds, clouds, and precipitation are all brought on by these temperature differences.
To know more about weather visit:
https://brainly.com/question/9662539
#SPJ1
chromium has 24 electrons. write out the entire electron configuration for chromium using spdf notation
Using spdf notation, the electron configuration for chromium is [Ar] 3d5 4s1 whose atomic number is 24.
In the sixth column of the periodic table chromium is the first element. It is under the transition metal category. Along with its 24 protons and 24 electrons, the most common form of chromium also has 28 neutrons. The placement of electrons in various atomic orbitals is known as the electronic configuration. The various appropriate orbitals will be filled with electrons.
The s orbitals can accommodate two electrons, while the p orbitals can accommodate six, the d orbitals can accommodate ten, and the f orbitals can accommodate fourteen electrons. Chromium has an atomic number of 24. Chromium has the electrical configuration 1s22s22p63s23p64s13d5.
To learn more about electronic configuration click here https://brainly.com/question/29757010
#SPJ4
Write a balanced nuclear equation for each of the radioactive decay processes.
Answer: Alpha emission, beta emission, postitron emission,electron capture and gamma emission.
Explanation:
A=- \frac {dN}{dt}Another important atomic clock used for dating purposes is based on the radioactive decay of the isotope carbon-14 As an example, iodine-131 is a radioisotope with a half-life of 8 days. It decays by beta particle emission into xenon-131. After eight days have passed, half of the atoms of any sample of iodine-131 will have decayed, and the sample will now be 50% iodine-131 and 50% xenon-131.
how might the properties of the air masses change when its late july(summer)
Answer:
Moving from one environment to another causes it to change
which of the following are considered biofuels? select all that apply. check all that apply cellulosic ethanolcellulosic ethanol grain ethanolgrain ethanol methane from sewage and manuremethane from sewage and manure natural gas from shalenatural gas from shale biodiesel from soybean oilbiodiesel from soybean oil wind energy wind energy coal
The cellulosic ethanol cellulosic ethanol grain ethanol grain ethanol methane are considered biofuels. The two most common biofuels used today are ethanol and biodiesel.
Both of which are the first generation biofuel technologies. The BETO is working with industry to develop next-generation biofuels from waste, the cellulosic biomass, and algae-based resources. Ethanol (often derived from corn in the United States and sugarcane in Brazil), biodiesel (derived from vegetable oils and liquid animal fats), green diesel (derived from algae and other plant sources), and the biogas are examples of the biofuels (methane derived from animal manure and other digested organic material).
To learn more about biofuels, click here.
https://brainly.com/question/502679
#SPJ4
What is the significance of the half-life of a radioisotope?
A. It tells how long a radioisotope sample is considered dangerous.
B. It tells what kind of radioactivity is released through radioactive
decay.
C. It tells how much energy is released over the lifetime of a
radioactive sample.
D. It tells what fraction of a radioactive sample remains after a
certain length of time.
Answer:
D) It tells what fraction of a radioactive sample remains after acertain length of time.
Explanation:
consider the following electron configurations to answer the questions that follow: (i) 1s2 2s2 2p6 3s1 (ii) 1s2 2s2 2p6 352 (iii) 1s2 2s2 2p6 3s2 3p1 (iv) 1s2 2s2 2p6 3s2 3p4 (v) 1s2 2s2 2p6 3s2 3p5 the electron configuration of the atom with the most negative electron affinity is
The electron configuration of the atom with the most negative electron affinity is 1s² 2s² 2p⁶ 3s¹ sodium (Na)
When an atom gains an electron, there is an energy change called electron affinity.
Eea = X(g) + e⁻ ⇒ XE
E stand for change in energy (E)
Eea stands for electron affinity.
Affinity for electrons frequently has negative energy levels. An electron can be added to an atom more readily the more negative the electron affinity. The periodic table shows that electron affinities increase with period.
Because electrons are added to energy levels, which brings them closer to the nucleus, there is a stronger attraction between the nucleus and its electrons, increasing electron affinity higher for the groups and from left to right across periods of a periodic table.
However, a few exceptions:
1. Elements in group 18 (8A) have electron affinities that are larger than zero. This is due to the atom's filled valence shell, which prevents an electron from being added without it moving to a lower energy shell.
2. Because adding an electron necessitates that it stay in the previously vacant p sub-shell, group 2 (2A) elements have higher electron affinities.
3. Due to the necessity of adding an electron to an orbital that is already occupied, group 15 (5A) elements have higher electron affinities.
Putting these things into practice with the components listed in the question
(i) 1s² 2s² 2p⁶ 3s¹ = 11 Sodium (Na)
(ii) 1s² 2s²2p⁶ 35² = 15 Phosphor (P)
(iii) 1s² 2s² 2p⁶ 3s² 3p¹ = 13 Aluminum (Al)
(iv) 1s² 2s² 2p⁶ 3s² 3p⁴ = 16 Sulfur( S)
(v) 1s² 2s² 2p⁶ 3s²= 12 Magnesium (Mg)
We knew that, electron affinity increases upward for the groups and from left to right across periods so, the electron congifuration that have the most negative electron affinity is sodium (Na) 1s² 2s² 2p⁶ 3s¹ .
Learn more about electron affinity at https://brainly.com/question/14351799
#SPJ4
A certain liquid X has a normal boiling point of 126.00 °C and a boiling point elevation constant K(b) = 1.63 °C kg*mol^-1. A solution is prepared by dissolving 1 some iron(III) chloride (FeCl3) in 600. g of X. This solution boils at 127.3 °C. Calculate the mass of FeCl3, that was dissolved. Round your answer to 2 significant digits.
The molality of the solution from the elevation of boiling point and elevation constant is obtained as 0.79 molal. From this, the weight of iron chloride is added is 77.6 g.
What is molality?Molality of a solution is the ratio of the number of moles of solute to the mass of solvent in kg. The elevation in boiling point of a solution by the addition of a solute is proportional to the molality by the equation:
ΔT = Kb m.
Given ΔT = 127.3 - 126 = 1.3 °C.
Kb = 1.63 °C Kg /mol.
mass of solvent = 600 g = 0.6 Kg
molality = ΔT / Kb
= 1.3 °C / 1.63 °C Kg /mol
= 0.79 mol/kg.
Molality = 0.79 Kg/mol = number of moles of FeCl₃ / 0.6 Kg
no.of moles of FeCl₃ = 0.79 Kg /mol × 0.6 Kg = 0.47 moles
Therefore, the mass of FeCl₃ added is:
= no.of moles × molar mass
= 0.47 × 162.3 g/mol = 77.61 g.
Therefore, the mass of FeCl₃ added is 77.61 g.
To find more on molality, refer here:
https://brainly.com/question/17034043
#SPJ1
How does the balanced equation relate to the law of conservation of matter?
Answer:
The law of conservation of mass states that matter cannot be created or destroyed. If we have an unbalanced equation, atoms are either destroyed or created, which totally violates this law
In a specific molecule, there are 21 continuous conjugated bonds (each 140 pm in length) . You can assume this system can be approximated by a one-dimensional particle in a box (particle on a line). How much energy would be required to promote an electron from the n = 11 level to the n= 12 level?
3.7*[tex]10^{-20}[/tex] J energy would be required to promote an electron from the n = 11 level to the n= 12 level.
According to particle in a box model energy is
E=[tex]\frac{n^{2} }{8ml^{2} } h^{2}[/tex] where n = no of energy level = 10
h is Planck constant, m is mass of electron= 9.1*[tex]10^{-31}[/tex]kg
and l is length of box= 140pm= 140*[tex]10^{-10}[/tex] m.
so E =3.7*[tex]10^{-20}[/tex]J.
What is particle in a box model?
The particle in a box model, sometimes referred to as the infinite potential well or the infinite square well, in quantum mechanics depicts a particle that is free to travel in a constrained area enclosed by impenetrable barriers.
Read more about particle in a box model:
https://brainly.com/question/15021026
#SPJ1
to determine the unknown concentration of copper ions in solution, you will first prepare a calibration curve. the calibration curve plots
Use equation: (C=m/V). Now, the known concentration of copper(ll) ion solution and a colorimeter to produce a cu(ll) ion conc./absorbance calibration curve. you will be able to read its conc. from the curve.
How is titration used to determine an unknown concentration?A titration is a technique in which a solution of known concentration is used to determine the concentration of an unknown solution. The titrant (the known solution) is added from a buret to a known quantity of the analyte (the unknown solution) until the reaction is complete.
What is the use of calibration curve?A calibration curve is a way to identify the concentration of an unknown compound. These curves use data points of known compounds at varying concentrations, and researchers or developers can use these curves to find where an unknown substance plots.
Learn more about burette below:
https://brainly.com/question/25311014
#SPJ4