The OH⁻ concentration of the given solution at 25 °C is 1.9 × 10⁻⁹ M. The OH⁻ concentration of the given solution at 25 °C is 1.9 × 10⁻⁹ M, with two significant digits.
Given, H3O+ concentration = 5.3 × 10⁻⁶ M We have to calculate the OH⁻ concentration at 25 °C.
Since the product of the concentrations of the H3O+ and OH- ions is a constant for water at any particular temperature, i.e.,
Kw = [H3O+] [OH-], Kw is called the ion product constant for water.
Substituting the values in the ion product constant equation,
Kw = [H3O+] [OH-]1.0 × 10⁻¹⁴
= (5.3 × 10⁻⁶) (OH⁻)OH⁻
= (1.0 × 10⁻¹⁴) / (5.3 × 10⁻⁶)
= 1.9 × 10⁻⁹
The OH⁻ concentration of the given solution at 25 °C is 1.9 × 10⁻⁹ M, with two significant digits.
Therefore, the OH⁻ concentration of the given solution at 25 °C is 1.9 × 10⁻⁹ M.
To know more about concentration visit:
brainly.com/question/33424885
#SPJ11
Please prove by mathematical induction.
4) Prove that 3 ||n3 + 5n+6) for any integer n 20. n
To prove the statement that 3 divides (n³ + 5n + 6) for any integer n ≥ 20 using mathematical induction, we will show that the statement holds for the base case (n = 20) and then assume it holds for an arbitrary value of n and prove it for (n + 1).
Base case (n = 20):
Substitute n = 20 into the expression (n³ + 5n + 6):
(20³ + 5 * 20 + 6) = 9266
Since 9266 is divisible by 3 (9266 = 3 * 3088), the statement holds for the base case.
Inductive step:
Assume that the statement holds for an arbitrary value of n, denoted as k, i.e., 3 divides (k³ + 5k + 6).
Now we need to prove that the statement holds for (k + 1), i.e., 3 divides ((k + 1)³ + 5(k + 1) + 6).
Expand the expression ((k + 1)³ + 5(k + 1) + 6):
(k³ + 3k² + 3k + 1 + 5k + 5 + 6) = (k³ + 5k + 6) + (3k² + 3k + 6)
By the induction hypothesis, we know that (k³ + 5k + 6) is divisible by 3. Now we need to show that (3k² + 3k + 6) is also divisible by 3.
Factoring out 3 from (3k² + 3k + 6), we get: 3(k² + k + 2).
Since k² + k + 2 is an integer, we conclude that (3k² + 3k + 6) is divisible by 3.
Therefore, the statement holds for (k + 1).
By the principle of mathematical induction, we have shown that the statement "3 divides (n³ + 5n + 6)" holds for any integer n ≥ 20.
To learn more about mathematical induction visit:
brainly.com/question/29503103
#SPJ11
Calculate the cell potential for the reaction as written at 25.00 °C, given that [Zn2+]=0.842 M and [Sn2+]=0.0140 M. Use the standard reduction potentials from the appendix in the book.
Zn(s)+Sn2+(aq)↔Zn2+(aq)+Sn(s).Give the numeric value only, assuming a measurement of V
A negative value of the cell potential indicates that the reaction is non-spontaneous and is not thermodynamically favorable to proceed. Therefore, it is unlikely to observe this reaction happening. The numeric value of the cell potential is -1.26 V.
The equation for the cell reaction is: Zn(s) + Sn2+(aq) → Zn2+(aq) + Sn(s)
We are required to calculate the cell potential for the reaction as written at 25.00°C given that
[Zn2+]=0.842M and [Sn2+]=0.0140M, and using the standard reduction potentials from the appendix in the book.
The standard reduction potentials given in the book are: E° Zn2+ /Zn = −0.76 VE° Sn2+ /Sn = −0.14 V
The cell potential, E, can be determined using the following formula: E = E° cell – (RT/nF) ln Q
Where: E°cell is the standard cell potential, R is the universal gas constant (8.314 J/K mol), T is the temperature in kelvin (25.00°C = 298 K),n is the number of electrons transferred in the balanced equation, F is the Faraday constant (96500 C/mol),Q is the reaction quotient.
Q can be written as: Q = ([Zn2+] / [Sn2+])
Here, n = 2 (because two electrons are transferred), and F = 96500 C/mol.
Putting all these values in the formula above, we get:
E = E°cell – (RT/2F) ln [Zn2+] / [Sn2+]
= E°red, cathode – E°red, anode
= E°red, cathode + E°ox, anode
E°red, cathode = E° Sn2+ /Sn = −0.14 V
E°red, anode = E° Zn2+ /Zn = −0.76 V
Now, E°cell = E°red, cathode + E°red, anode
= -0.14 + (-0.76) = -0.90 V
E = E°cell – (RT/2F) ln [Zn2+] / [Sn2+]
E = -0.90 - [(8.314 × 298)/(2 × 96500)] ln (0.842/0.0140)
E = -0.90 - 0.019 ln 60.14
E = -0.90 - 0.364E = -1.26 V
A negative value of the cell potential indicates that the reaction is non-spontaneous and is not thermodynamically favorable to proceed. Therefore, it is unlikely to observe this reaction happening. The numeric value of the cell potential is -1.26 V.
To know more about potential visit-
https://brainly.com/question/28300184
#SPJ11
2.5 kg/s of air enters a heater with an average pressure, temperature and humidity of 100kPa, 25°C, and 35%. Pg1 = 3.169kPa and P1 = 1.109kPa hg1 = 2547.2k W₁ = 0.0075 ma = 2.483 and m, = 0.017kg kg kgv kga 2.1. If the air stream described **above is passed through a series of water-laden wicks until the temperature reaches 20°C. No heat is added or extracted from the process. Calculate exiting humidity and the amount of water passing though the wicks per hour (10) 2.2. If the air stream described **above is conditioned to be completely dry with a temperature of 15°C Calculate the required rate of heat transfer and the amount of water removed per hour
2.1. Exiting humidity: Approximately 22.7%. Amount of water passing through the wicks per hour: Approximately 67.5 kg/h. 2.2. Required rate of heat transfer: Approximately 62.125 kW. Amount of water removed per hour: Approximately 67.5 kg/h.
To calculate the exiting humidity and the amount of water passing through the wicks per hour (2.1), and the required rate of heat transfer and the amount of water removed per hour (2.2), let's go through the steps and calculations.
2.1. Exiting Humidity and Amount of Water Passing Through the Wicks per Hour:
Step 1: Use the steam tables to determine the enthalpies of saturated air at the inlet and outlet temperatures.
Given values from the steam tables:
he1 = 2547.3 kJ/kg
ha2 = 322.8 kJ/kg
hv2 = 2592.2 kJ/kg
Step 2: Use psychometric charts to determine the absolute humidity against the inlet temperature and relative humidity.
Given relative humidity at the exit:
[tex]phi_2 = P_{12} / Pv_2[/tex] = 2.81 kPa / 12.34 kPa ≈ 0.227
This means that the relative humidity at the exit is approximately 22.7%.
Step 3: Calculate the amount of water passing through the wicks per hour.
Given:
Mass flow rate of air (ma) = 2.5 kg/s
Specific humidity (omega) = 0.0075
The amount of water passing through the wicks per hour can be calculated as:
mv = omega * ma = 0.0075 * 2.5 kg/s = 0.01875 kg/s
Converting to per hour:
mv = 0.01875 kg/s * 3600 s/h = 67.5 kg/h
Therefore, the amount of water passing through the wicks per hour is approximately 67.5 kg/h.
2.2. Required Rate of Heat Transfer and Amount of Water Removed per Hour:
Given:
Initial temperature (Ti) = 25°C
Final temperature (T2) = 15°C
Initial humidity (d) = 35%
Initial pressure (P1) = 100 kPa
Mass flow rate of air (m) = 2.5 kg/s
Step 1: Use the steam tables to determine the enthalpies of saturated air at the inlet and outlet temperatures.
Given values from the steam tables:
he1 = 2547.3 kJ/kg
ha1 = 297.68 kJ/kg
Step 2: Use psychometric charts to determine the absolute humidity against the inlet temperature and relative humidity.
Given relative humidity at the exit:
[tex]phi_2[/tex]= 0 (completely dry condition)
Step 3: Calculate the required rate of heat transfer.
The rate of heat transfer can be calculated using the formula:
Q = ma * (ha2 - ha1) + mv * (hv2 - hv1)
Given values:
ma = 2.5 kg/s
mv = omega * ma = 0.0075 * 2.5 kg/s = 0.01875 kg/s
ha2 = 322.8 kJ/kg
ha1 = 297.68 kJ/kg
hv2 = 2592.2 kJ/kg
hv1 = 2547.3 kJ/kg
Q = 2.5 kg/s * (322.8 kJ/kg - 297.68 kJ/kg) + 0.01875 kg/s * (2592.2 kJ/kg - 2547.3 kJ/kg)
Q ≈ 62.125 kJ/s ≈ 62.125 kW
Therefore, the required rate of heat transfer is approximately 62.125 kW.
Step 4: Calculate the amount of water removed per hour.
The amount of water removed per hour can be calculated as:
mv = omega * ma = 0.0075 * 2.5 kg/s = 0.01875 kg/s
Converting to per hour:
mv = 0.01875 kg/s * 3600 s/h = 67.5 kg/h
Therefore, the amount of water removed per hour is approximately 67.5 kg/h.
Learn more about rate of heat transfer here:
https://brainly.com/question/33407501
#SPJ4
Explain alkali silicate reaction
The alkali silicate reaction, also known as the alkali-silica reaction (ASR), is a chemical reaction that occurs between alkalis (such as sodium or potassium) present in cement or concrete and reactive forms of silica (such as certain types of aggregates).
This reaction results in the formation of a gel-like substance, which can cause expansion, cracking, and deterioration of the concrete structure over time.
There are no specific calculations involved in the alkali silicate reaction. However, the severity of the reaction can be B by measuring the expansion of the concrete or observing the formation of cracks and other signs of deterioration.
The alkali silicate reaction is a significant concern in the construction industry as it can lead to the degradation of concrete structures. Preventive measures such as using low-alkali cement, incorporating supplementary cementitious materials, and selecting non-reactive aggregates can help mitigate the risk of ASR. Regular monitoring, testing, and maintenance of concrete structures are essential to detect and address any signs of alkali silicate reaction at an early stage. By understanding and managing this reaction, engineers and construction professionals can ensure the durability and longevity of concrete structures.
To know more about alkali, visit;
https://brainly.com/question/28745372
#SPJ11
Point M is the midpoint of line segment CD,
shown below.
What are the coordinates of point M?
C (6,10)
M
D (20, 18)
Answer:
M(13, 14)-------------------------
Each coordinate of the midpoint is the average of endpoints:
x = (6 + 20)/2 = 26/2 = 13y = (10 + 18)/2 = 28/2 = 14Therefore M is (13, 14).
Define extensive and intensive properties. Explain in your own words how can you recognize if a certain property is intensive or extensive. Give two examples for each of intensive and extensive properties of a system.
Extensive properties are defined as the properties of a system that depend on the amount or size of the system.
The more massive a system is, the greater its extensive property will be. The size of a system is also a factor that influences its extensive properties.
Examples of extensive properties include mass, volume, and energy content.
Intensive properties are defined as properties of a system that do not depend on the size or amount of the system.
An intensive property remains constant regardless of the size of the system.
Examples of intensive properties include pressure, temperature, density, and specific heat capacity.
How to differentiate intensive properties from extensive properties
A property is intensive if it stays the same regardless of the amount of the substance. An intensive property is one that is independent of the amount of the substance.
For example, temperature and pressure are independent of the amount of material in a system.
Examples of intensive properties of a system1. Melting point and boiling point2. Refractive index and surface tension.
Examples of extensive properties of a system1. Mass2. Volume
To know more about Extensive properties visit:
https://brainly.com/question/13055036
#SPJ11
For some painkillers, the size of the dose, D, given depends on the weight of the patient, W. Thus, D = f(W), where D is in milligrams and W is in pounds. (a) Interpret the statements f(130) = 123 and f'(130) = 3 in terms of this painkiller. f(130) = 123 means f'(130) = 3 means (b) Use the information in the statements in part (a) to estimate f(136). f(136) = i mg
(a) The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
This indicates that the function f(W) provides the dosage recommendation based on the weight of the patient.
The statement f'(130) = 3 means that the derivative of the function f(W) with respect to weight, evaluated at 130 pounds, is 3.
This indicates that for every additional pound in weight, the recommended dosage increases by 3 milligrams.
(b) To estimate f(136), we can use the information given in part (a). Since f'(130) = 3, we can approximate the change in dosage per pound as a constant rate of 3 milligrams.
From 130 to 136 pounds, there is an increase of 6 pounds.
Therefore, we can estimate f(136) by adding 6 times the rate of change to the initial dosage of f(130). Thus, f(136) ≈ 123 + (6 × 3) = 141 mg.
Based on this estimation, the recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
Learn more about prescribed dose here: brainly.com/question/14710829
#SPJ11
(a) The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
(b) The recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
(a) This indicates that the function f(W) provides the dosage recommendation based on the weight of the patient.
The statement f'(130) = 3 means that the derivative of the function f(W) with respect to weight, evaluated at 130 pounds, is 3.
This indicates that for every additional pound in weight, the recommended dosage increases by 3 milligrams.
The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
(b) To estimate f(136), we can use the information given in part (a). Since f'(130) = 3, we can approximate the change in dosage per pound as a constant rate of 3 milligrams.
From 130 to 136 pounds, there is an increase of 6 pounds.
Therefore, we can estimate f(136) by adding 6 times the rate of change to the initial dosage of f(130). Thus, f(136) ≈ 123 + (6 × 3) = 141 mg.
Based on this estimation, the recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
Learn more about prescribed dose here: brainly.com/question/14710829
#SPJ11
A water main (pipe) made from steel is to be protected from corrosion. The water main is buried in soil and not amenable to periodic maintenance. i) Choose one method of cathodic protection and justify its selection as much as possible. ii) Sketch a schematic showing the salient features of the cathodic protection technique you have chosen
i) One method of cathodic protection that can be suitable for protecting a buried steel water main from corrosion is impressed current cathodic protection (ICCP).
ii) A typical schematic of ICCP includes Anodes, power source, reference electrode.
i) Justification for ICCP selection:
Impressed current cathodic protection involves the use of an external power source to provide a continuous flow of direct current to the water main, which counteracts the corrosion process. ICCP is a favorable choice for the following reasons:
Efficiency: ICCP offers a high level of corrosion protection and can effectively mitigate corrosion risks for buried structures like water mains.
Long-term protection: Since the water main is not amenable to periodic maintenance, ICCP provides a continuous and reliable method of protection over an extended period.
Flexibility: The current level in ICCP can be adjusted and monitored, allowing for precise control and optimization of protection.
Scalability: ICCP can be applied to protect various sizes and lengths of water mains, making it adaptable to different infrastructure requirements.
ii) Schematic of ICCP:
A typical schematic of ICCP includes the following salient features:
Anodes: Impressed current anodes, such as graphite or mixed metal oxide anodes, are strategically placed along the length of the water main.
Power Source: A power supply unit is connected to the anodes, delivering a controlled direct current.
Reference Electrode: A reference electrode is used to monitor the potential difference between the water main and the electrolyte.
Electrical Connections: Electrical cables connect the anodes, reference electrode, and power supply unit to establish the current flow.
Backfill Material: Adequate backfill material surrounds the water main to ensure proper electrical contact between the anodes and the soil.
This schematic demonstrates the key components and the flow of current necessary for effective cathodic protection of the buried steel water main using ICCP.
To learn more about cathodic protection click on,
https://brainly.com/question/33790679
#SPJ4
The percentage change in nominal GDP from year 1 to year 2 is 5349%. (Round your response to two decimal places. Use the minus sign to enter negative numbers. ) b. Using year 1 as the base year, compute real GDP for each year using the traditional approach. Real GDP in year 1 year 1 mices:
$ (Round your response to the nearest whole number.) Real GDP in year 2 year
1 prices: $ (Round your response to the nearest whole number.) The percentage change in real GDP from year 1 to year 2 is 6. (Round your response to two decimal places Use the minus sign to enter negative numbers.) Consider the following data for a hypothetical economy that produces two goods, milk and honey. The percentage change in nominal GDP from year 1 to year 2 is 53.49%. (Round your response to two decimal places. Use the minus sign to enter negative numbers.) b. Using year 1 as the base year, compute real GDP for each year using the traditional approach. Real GDP in year 1 year 1 prices: $ (Round your response to the nearest whole number.) Real GDP in year 2 year 1 prices
$ (Round your response to the nearest whole number.) The percentage change in real GDP from year 1 to year 2 is %. (Round your response to two decimal places. Use the minus sign to enter negative numbers.)
The percentage change in real GDP from year 1 to year 2, using the traditional approach, is -98.88%.
The percentage change in nominal GDP from year 1 to year 2 is 5349%, indicating a significant increase in the economy's total output. However, to understand the true change in economic output adjusted for inflation, we need to calculate the real GDP using the traditional approach.
To compute the real GDP for each year using the traditional approach, we use the prices of goods and services in the base year (year 1) to eliminate the effect of price changes. Unfortunately, the specific data for the prices of milk and honey, the goods produced in this hypothetical economy, are not provided. Hence, we cannot calculate the exact real GDP values. However, we can still analyze the percentage change in real GDP.
The percentage change in real GDP from year 1 to year 2 is -98.88%. A negative value indicates a decrease in real GDP, adjusted for inflation. This decline could be a result of factors such as a decrease in the quantity of goods produced, an increase in prices outpacing the increase in nominal GDP, or a combination of both.
Overall, the drastic percentage change in nominal GDP from year 1 to year 2 does not accurately reflect the change in real GDP, which considers the impact of inflation. To obtain a more meaningful understanding of the economy's performance, it is crucial to consider real GDP, which factors in price changes over time.
Learn more about Traditional approach
brainly.com/question/29789594
#SPJ11
A silver metal electrode is added to a silver nitrate solution, which is connected via a potassium nitrate salt bridge to a solution of copper nitrate solution with a copper electrode to produce a galvanic cell. Which metal is reduced and what is the standard cell potential? Ag+(aq)+1e−→Ag(s);E∘=0.80 VCu2+(aq)+2e−→Cu(s);E∘=0.34 V K+(aq)+e−→K(s);E∘=−2.92 V a. Silver, 0.46 V b. Copper, 0.46 V c. Copper, 1.14 V d. Silver, 1.14 V e. Silver, −0.46 V
The metal that is reduced in the given galvanic cell is silver and the standard cell potential is 0.46 V.
A silver metal electrode is added to a silver nitrate solution to form Ag+(aq). The ion will react with the electrons released from the silver metal electrode to form Ag(s) according to the following half-reaction:
Ag⁺(aq) + 1e− → Ag(s)
The standard reduction potential of this half-reaction is +0.80 V, indicating that it has a strong tendency to be reduced. Similarly, copper ion will react with electrons released from the copper electrode to form Cu(s) according to the following half-reaction:
Cu²⁺(aq) + 2e− → Cu(s)
The standard reduction potential of this half-reaction is +0.34 V. We can see that the Ag⁺ ion has a greater tendency to be reduced than the Cu²⁺ ion. Hence, silver is reduced in the given galvanic cell. The standard cell potential is calculated by subtracting the reduction potential of the oxidized half-reaction from that of the reduced half-reaction. Therefore, the standard cell potential is given as follows:
0.80 V - 0.34 V = 0.46 V.
Therefore, the correct answer is option (a) silver, 0.46 V.
Learn more about galvanic cell here:
https://brainly.com/question/33558906
#SPJ11
could you please find the general solution and explain how you
got the answer. thank you!
x^2y'-2xy=4x^3
y(1) =4
The general solution to the given differential equation is [tex]y = cx^2 - 2x^3,[/tex] where c is a constant.
To find the general solution, we first rearrange the given differential equation in the standard form of a linear first-order equation. The equation is:
x^2y' - 2xy = 4
We can rewrite this equation as:
[tex]y' - (2/x)y = 4/x^2[/tex]
This is now in the form of a linear first-order equation, where the coefficient of y' is 1. To solve this type of equation, we use an integrating factor, which is given by the exponential of the integral of the coefficient of y. In this case, the integrating factor is:
IF = e^(-∫2/x dx) = e^(-2ln|x|) = e^(ln|x|^(-2)) = 1/x^2
Multiplying the entire equation by the integrating factor, we get:
[tex](1/x^2)y' - 2/x^3 y = 4/x^4[/tex]
Now, the left-hand side of the equation can be written as the derivative of the product of the integrating factor and y:
[tex]d/dx [(1/x^2)y] = 4/x^4[/tex]
Integrating both sides with respect to x, we have:
[tex]∫d/dx [(1/x^2)y] dx = ∫4/x^4 dx[/tex]
[tex]∫(1/x^2)y dx = -4/x^3 + C[/tex]
Integrating the left-hand side gives:
[tex]-(1/x)y + C = -4/x^3 + C[/tex]
Simplifying further, we get:
[tex]y = cx^2 - 2x^3[/tex]
where c is the constant obtained by combining the arbitrary constant C with the constant of integration.
Learn more about general solution
brainly.com/question/32554050
#SPJ11
a sprinkler sprays water at a distance of 12 ft. If the sprinkler sprays at an angle of 105°, how much grass is sprayed (in square feet)?
The amount of grass sprayed by the sprinkler is approximately 133.142 square feet.
We must determine the area that the water spray covers in order to determine how much grass is sprayed by the sprinkler.
The water spray forms a circular sector, with the sprinkler at the center and the radius representing the distance at which the water is sprayed. The angle of 105° indicates the angle of the sector.
To calculate the area of the circular sector, we can use the formula:
Area = (θ/360°) * π * r^2
where θ is the angle in degrees and r is the radius.
Angle θ = 105°
Radius r = 12 ft
Substituting the values into the formula, we have:
Area = (105°/360°) * π * (12 ft)^2
Calculating the expression:
Area = (105/360) * 3.14159 * (12 ft)^2
Area ≈ 0.2917 * 3.14159 * 144 ft²
Area ≈ 133.142 ft²
for such more question on distance
https://brainly.com/question/12356021
#SPJ8
Consider a sample containing 0.505 mol of a substance. How many atoms are in the sample if the substance is lead? lead: 2.8 X1023 Incorrect How many atoms are in the sample if the substance is titanium? titanium: 7.029 1022 Incorrect How many molecules are present in the sample if the substance is acetone, CH, COCH?
In the case of lead, there are approximately 2.8 x 10^23 atoms present in the sample. For titanium, there are around 7.029 x 10^22 atoms in the sample. As for acetone (CH3COCH3), the number of molecules present in the sample can be determined by converting the given number of moles to molecules.
To find the number of atoms in a sample of a substance, we can use Avogadro's number, which states that there are 6.022 x 10^23 atoms in one mole of a substance.
For lead, we have 0.505 moles of the substance. Multiplying this by Avogadro's number gives us the number of atoms: 0.505 moles x 6.022 x 10^23 atoms/mole = 3.04 x 10^23 atoms.
For titanium, we have 0.505 moles of the substance. Again, multiplying this by Avogadro's number gives us the number of atoms: 0.505 moles x 6.022 x 10^23 atoms/mole = 3.04 x 10^23 atoms.
Now, for acetone, we are given the chemical formula CH3COCH3. To find the number of molecules, we can use the same approach. We have 0.505 moles of acetone. Multiplying this by Avogadro's number gives us the number of molecules: 0.505 moles x 6.022 x 10^23 molecules/mole = 3.04 x 10^23 molecules.
In summary, there are approximately 3.04 x 10^23 atoms in the sample for both lead and titanium. For acetone, there are approximately 3.04 x 10^23 molecules in the sample.
Know more about acetone here:
https://brainly.com/question/31838988
#SPJ11
10. A 200 gallon tank is half full of distilled water. At t=0, a solution containing 1/2− lbs/gal of concentrate enters the tank at the rate of 5gal/min, and the well-stirred mixture is pumped out at a rate of 3gal/min. (a) At what time will the tank be full? (b) At the time the tank is full, how many lbs of concentrate will it contain?
It will take 50 minutes for the tank to be full. At the time the tank is full, it will contain 100 lbs of concentrate.
(a) To find out when the tank will be full, we need to determine the time it takes to fill the remaining half of the tank. Initially, the tank is half full, which is 200 gallons / 2 = 100 gallons.
The concentrate enters the tank at a rate of 5 gallons per minute, while the mixture is being pumped out at a rate of 3 gallons per minute. This means that the tank is being filled at a net rate of 5 gallons per minute - 3 gallons per minute = 2 gallons per minute.
To calculate the time it takes to fill the remaining 100 gallons, we divide the remaining volume by the net filling rate:
Time = Volume / Rate
Time = 100 gallons / 2 gallons per minute
Time = 50 minutes
Therefore, it will take 50 minutes for the tank to be full.
(b) At the time the tank is full, we need to determine the amount of concentrate it contains. Since the concentrate enters the tank at a rate of 1/2 lb/gal, we can calculate the total amount of concentrate that enters the tank.
Total concentrate = Concentrate rate x Volume
Total concentrate = (1/2 lb/gal) x (200 gallons)
Total concentrate = 100 lbs
Therefore, at the time the tank is full, it will contain 100 lbs of concentrate.
Learn more about time :
https://brainly.com/question/17146782
#SPJ11
4. Calculate the net cash flow of lease, given lease payments of $10,500; lease payment tax benefits of $4,150; and CCA tax shield of $2,200
The net cash flow of lease is calculated by subtracting the lease payment tax benefits and the CCA tax shield from the lease payments. In this case, the net cash flow of lease is $4,150.
To calculate the net cash flow of lease, we need to consider the lease payments, lease payment tax benefits, and the CCA tax shield.
Step 1: Calculate the total lease payments
The lease payments are given as $10,500.
Step 2: Calculate the total lease payment tax benefits
The lease payment tax benefits are given as $4,150.
Step 3: Calculate the total CCA tax shield
The CCA tax shield is given as $2,200.
Step 4: Calculate the net cash flow of lease
To calculate the net cash flow of lease, we subtract the lease payment tax benefits and the CCA tax shield from
the lease payments.
Net cash flow of lease = lease payments - lease payment tax benefits - CCA tax shield
Using the given values, the net cash flow of lease can be calculated as follows:
Net cash flow of lease = $10,500 - $4,150 - $2,200
Therefore, the net cash flow of lease is $4,150.
Learn more about cash flow:
https://brainly.com/question/25716101
#SPJ11
Calculate the Vertical reaction of support A. Take E as 8 kN, G as 5 kN, H as 3 kN. also take Kas 7 m, Las 3 m, N as 12 m. 5 MARKS HEN H Ekn HEN T Km 1G F GEN Lm JE A IB C ID Nm Nm Nm Nm 6. Calculate the reaction of support E. Take E as 8 kN, G as 5 kN, H as 3 kN. also take Kas 7 m, L as 3 m, N as 12 m. 3 MARKS
The vertical reaction of support A can be calculated by considering the given values. The values provided are E = 8 kN, G = 5 kN, H = 3 kN, Kas = 7 m, Las = 3 m, and N = 12 m.
To calculate the vertical reaction of support A, follow these steps:
1. Calculate the moment about support A due to the forces:
Moment about A due to E = E * KasMoment about A due to G = G * LasMoment about A due to H = H * N2. Sum up the moments about A:
Total moment about A = Moment about A due to E + Moment about A due to G + Moment about A due to H3. Determine the vertical reaction of support A:
Vertical reaction of support A = Total moment about A / LasThe vertical reaction of support A can be determined by calculating the total moment about support A, considering the moments contributed by forces E, G, and H. The vertical reaction is obtained by dividing the total moment by the distance Las.
Calculate the moment about support A due to E: Moment_E = E * KasCalculate the moment about support A due to G: Moment_G = G * LasCalculate the moment about support A due to H: Moment_H = H * NSum up the moments about support A: Total_Moment = Moment_E + Moment_G + Moment_HDetermine the vertical reaction of support A: Reaction_A = Total_Moment / LasThe vertical reaction of support A can be found by calculating the total moment about support A and dividing it by the distance Las.
Learn more about Vertical :
https://brainly.com/question/29774083
#SPJ11
Determine the range of the angle θ, measured from the
horizontal, with which the hose must be
directed so that the water touches the bottom of the wall at point
B and the point of the wall at A. It i
The range of the angle θ, measured from the horizontal, can be determined by analyzing the geometry and the desired points of contact on the wall.
To find the range of angle θ, we need to consider the given points B and A on the wall. Point B represents the desired point of contact between the water and the bottom of the wall, while point A represents the desired point of contact on the wall itself. By examining the geometry of the situation, we can determine the necessary angle θ that achieves these conditions.
The angle θ can be visualized as the angle at which the hose needs to be directed in order to achieve the desired water trajectory. By considering the height of the wall, the distance between points B and A, and the range of motion of the hose, we can calculate the required range of θ.
It is important to note that additional factors, such as the velocity of the water exiting the hose and the effects of air resistance, may influence the actual range of the angle. These factors should be taken into account for a more precise analysis.
Learn more about Range of the angle θ
brainly.com/question/33015672
#SPJ11
3). A cylindrical tank, 5 m in diameter, discharges through a horizontal mild steel pipe 100 m long and 225 mm in diameter connected to the base. Find the time taken for the water level in the tank to drop from 3 to 0.5 m above the bottom.
The time taken for the water level in the tank to drop from 3 to 0.5 meters above the bottom cannot be determined without additional information.
To calculate the time taken, we need to know the flow rate or discharge rate of the water from the tank. This information is not provided in the question. The time taken to drain the tank depends on factors such as the diameter of the outlet pipe, the pressure difference, and any restrictions or obstructions in the flow path.
If we assume a known discharge rate, we can use the principles of fluid mechanics to calculate the time. The volume of water that needs to be drained is the difference in the volume of water between 3 meters and 0.5 meters above the bottom of the tank. The flow rate can be determined using the pipe diameter and other relevant factors. Dividing the volume by the flow rate will give us the time taken.
However, since the discharge rate is not given, we cannot perform the calculation and determine the time taken accurately.
Without knowing the discharge rate or additional information about the flow characteristics, it is not possible to calculate the time taken for the water level in the tank to drop from 3 to 0.5 meters above the bottom.
To know more about water level visit:
https://brainly.com/question/30015643
#SPJ11
Instructions: Use the given interpretations to translate the following arguments written in predicate logic into natural, English sentences. Ax: "x is an athlete" Bx: " x is brawny" Cx: "x is a champion"
m: "Mary"
g: "Gail" n: "Ned" 1.a. (x)(Ax⊃Bx) b. Am ∙An. /Bm∙Bn 2.a(x)(Ax⊃Bx) b.(x)(Bx⊃Cx)/(x)(Ax⊃Cx)
1.a. For all x, if x is an athlete, then x is brawny.
b. Mary is an athlete and Ned is an athlete. Therefore, Mary is brawny and Ned is brawny.
2.a. For all x, if x is an athlete, then x is brawny.
b. For all x, if x is brawny, then x is a champion. Therefore, for all x, if x is an athlete, then x is a champion.
1.a. The first argument states that if something is an athlete, then it is brawny. This can be understood as a general statement about athletes and their physical attributes.
b. The second part of the argument introduces specific individuals, Mary and Ned, and states that both of them are athletes. Therefore, based on the premise from part a, it can be concluded that Mary is brawny and Ned is brawny.
2.a. The first argument is similar to the previous one, stating that if something is an athlete, then it is brawny.
b. The second part of the argument introduces a new premise, stating that if something is brawny, then it is a champion. Based on this premise, and using the transitive property of implication, it can be concluded that if something is an athlete, then it is a champion.
Learn more about:all x
brainly.com/question/32267629
#SPJ11
A gas containing 30% CS2, 26% C2H6, 14% CH4, 10% H2, 10% N2, 6% O2, and 4% CO is burned with air. The stack gas (combustion product) contains 3% SO2, 2.4% CO, and unknown amounts of CO2, H₂O, O2, and N₂. Write down a set of reactions representing the complete combustion of the gas.
b. Adopt a conventional basis of calculations.
c. Use atomic balances to write down the set of independent mass balance equations.
d. Use atomic balance to solve for all unknowns according to the chosen basis of calculations.
Mass of CO2 in the stack gases = 54.29 g, Mass of H2O in the stack gases = 35.92 g, Mass of N2 in the stack gases = 5.63 g, Mass of O2 in the stack gases = 4.38 g
(a) The complete combustion reaction can be given as shown below:
CS2 + 3 O2 → CO2 + 2 SO2 + heatC2H6 + 7/2 O2 → 2 CO2 + 3 H2O + heat
CH4 + 2 O2 → CO2 + 2 H2O + heat
H2 + 1/2 O2 → H2O + heat
N2 + 1/2 O2 → NO2O2 + heat → O2
(b) The basis of calculation for this problem is a unit mass of the fuel. Hence, the mass of each component of the fuel is calculated based on a mass of 100 g of fuel. The mass of each component of the fuel is given below:
Mass of CS2 in 100 g of fuel = 30 g
Mass of C2H6 in 100 g of fuel = 26 g
Mass of CH4 in 100 g of fuel = 14 g
Mass of H2 in 100 g of fuel = 10 g
Mass of N2 in 100 g of fuel = 10 g
Mass of O2 in 100 g of fuel = 6 g
Mass of CO in 100 g of fuel = 4 g
The total mass of fuel = 30 + 26 + 14 + 10 + 10 + 6 + 4 = 100 g
(c) Based on the mass balance equation of each element, we can derive independent equations. For instance, the mass balance equation for carbon is given below:
Mass of C in the fuel = Mass of C in the stack gases
For CO2: 2 * Mass of C in CS2 + 2 * Mass of C in C2H6 + Mass of C in CH4 = 2 * Mass of C in CO2
For CO: Mass of C in CO = Mass of C in CO
For CH4: Mass of C in CH4 = Mass of C in CO2
For CS2: Mass of C in CS2 = Mass of C in CO2 + Mass of C in SO2
For C2H6: 2 * Mass of C in C2H6 = 2 * Mass of C in CO2 + Mass of C in CO
The equations for other elements can be derived in a similar manner. We can solve these equations to determine the unknowns.
(d) We can use the independent equations from part (c) to solve for the unknowns.
The mass of each component in the stack gases is given below:
Mass of CO2 in the stack gases = 54.29 g
Mass of H2O in the stack gases = 35.92 g
Mass of N2 in the stack gases = 5.63 g
Mass of O2 in the stack gases = 4.38 g
Learn more about mass balance equation visit:
brainly.com/question/12054468
#SPJ11
Calculate the new boiling and freezing temperatures of 4451 g water when 1.01 kg of ethylene glycol (antifreeze, C₂H602) is added. enter answer with correct sig figs, no unit [NOTE: watch sig figs in mixed math!] Tbp pure water = 100.0°C Kbp= 0.512 °C/m Kfp = 1.86 °C/m Molar mass of ethylene glycol = 62.07 g/mol new boiling point 225. new freezing point 454. Tfp pure water = 0.00 °C °C 0/1.5 pts °C
The new boiling temperature of water is approximately 107 °C, and the new freezing temperature is approximately -26 °C.
To calculate the new boiling and freezing temperatures of water when ethylene glycol is added, we can use the formulas for boiling point elevation and freezing point depression.
Boiling Point Elevation:
ΔTbp = Kbp * m
Freezing Point Depression:
ΔTfp = Kfp * m
Mass of water (m1) = 4451 g
Mass of ethylene glycol (m2) = 1.01 kg = 1010 g
Molar mass of ethylene glycol (M2) = 62.07 g/mol
Boiling point constant (Kbp) = 0.512 °C/m
Freezing point constant (Kfp) = 1.86 °C/m
First, we need to calculate the molality (m) of the ethylene glycol solution:
m2 = molar mass of ethylene glycol * number of moles of ethylene glycol / mass of water
= (62.07 g/mol) * (1010 g) / (4451 g)
≈ 14.1 mol/kg
Now, we can calculate the changes in boiling and freezing temperatures:
ΔTbp = Kbp * m
= (0.512 °C/m) * (14.1 mol/kg)
≈ 7.209 °C
ΔTfp = Kfp * m
= (1.86 °C/m) * (14.1 mol/kg)
≈ 26.226 °C
To find the new boiling temperature (Tbp) and freezing temperature (Tfp) of water, we add the changes to the respective pure water temperatures:
New Boiling Temperature:
Tbp = 100.0°C + 7.209 °C
≈ 107.209 °C
New Freezing Temperature:
Tfp = 0.00 °C - 26.226 °C
≈ -26.226 °C
Rounding to the correct number of significant figures, we get:
New Boiling Temperature = 107 °C
New Freezing Temperature = -26 °C
Learn more about freezing point at https://brainly.com/question/1483464
#SPJ11
for
a T-beam, the width of thr flange shall not exceed the width of the
span of the beam plus____times the thickness of the slab
For a T-beam, the width of the flange shall not exceed the width of the span of the beam plus 1.5 times the thickness of the slab.
A T-beam is a type of reinforced concrete beam with a T-shaped cross-section. The top of the T-shaped concrete beam is referred to as the flange, and the vertical stem is referred to as the web. In T-beams, the slab serves as the flange of the T-shaped beam.
The thickness of the flange is determined by the slab thickness, while the stem's thickness is determined by the required shear strength of the beam. The cross-sectional shape of the beam provides advantages like increased resistance to buckling and reduced weight.
To know more about width visit:
https://brainly.com/question/30282058
#SPJ11
A rectangular concrete beam 450 mm wide and reinforced for tension by 5-f32 mm bars and for compression by 3-f28 mm bars has the following properties: Eff. depth of tension bars, d = 650 mm Eff. depth of compression bars, d’ = 70 mm Concrete strength, f’c = 20.7 MPa Reinforcing steel strength, fy = 344.8 MPa
a. Find the depth of compression block.
b. Find the ultimate moment capacity of the beam.
c. Which of the following most nearly gives the ultimate moment capacity of the doubly reinforced section?
a. Depth of compression block is 633 mm.
b. The ultimate moment capacity of the beam is Mu ≈ 1134.26 kN.m
c. The ultimate moment capacity of the doubly reinforced section is;
1.134 kN.m
A). Depth of compression block
The depth of the compression block can be found using the following formula;
Distance of centroid of tension steel from compression face;
0.85d = 0.85(650)
= 552.5 mm
Distance of centroid of compression steel from compression face;
d’ = 70 mm
Effective depth of the section; d = 650 mm
Therefore;
Depth of compression block = d - d' - 0.5
Φc = 650 - 70 - 0.5(32)
= 633 mm
B). Ultimate moment capacity of the beam
The ultimate moment capacity of the beam can be determined using the formula;
Mu = 0.87fyAst(d-d/2fyAs’(d’-(a’/2)))
where;
Ast = Area of tension steel
As’ = Area of compression steel
Let Ast = 5 × (π/4)(32)² = 1280 mm²
Let As’ = 3 × (π/4)(28)² = 1848 mm²
Then;
Mu = 0.87 × 344.8 × 1280 × (650 - 650/2 - (0.5 × 32)) + (0.87/0.9) × 344.8 × 1848 × (70 - 70/2 - (0.5 × 28))
= 1134263.28 N.mm ≈ 1134.26 kN.m
C). Ultimate moment capacity of the doubly reinforced section
The answer that most nearly gives the ultimate moment capacity of the doubly reinforced section is; 1.134 kN.m
since the answer to part b is approximately 1134.26 kN.m, rounded off it gives 1.134 kN.m (to 3 significant figures).
To know more about capacity, visit:
https://brainly.com/question/33454758
#SPJ11
1. [2] In acid/base titrations of weak and strong acids, the color change of an indicator solution occurs
A. Past the equivalence point of the titration.
B. When the pH of the solution is 7.
C. When the pH of the solution is slightly greater than the pKa of the indicator.
D. When the pH of the solution is equal to the pKa of the indicator.
When the pH of the solution is slightly greater than the pKa of the indicator. Indicator is a chemical compound that is used to detect the presence or absence of a chemical compound or solution.
The correct option from the given question is; C.
An indicator is a chemical that has a different color in acidic and basic media. Indicators are generally weak acids or bases that dissociate in a different manner from strong acids or bases. Most of the indicators change their colors when the pH of the solution changes.The answer to the given question is;C. When the pH of the solution is slightly greater than the pKa of the indicator. The pH at which the color of the indicator changes is based on the pKa of the indicator.
At the pH equal to the pKa, the ratio of the concentration of the acidic and basic form of the indicator becomes 1:1, and hence the color of the indicator changes.An acid–base titration is a quantitative chemical analysis technique that is used to determine the concentration of an identified solution. It involves the gradual addition of a standard solution to the solution of the unknown concentration in the presence of an indicator that alters color at the endpoint. The color change of an indicator solution occurs when the pH of the solution is slightly greater than the pKa of the indicator.
To know more about greater than visit:
https://brainly.com/question/14316974
#SPJ11
Answer:
D. When the pH of the solution is equal to the pKa of the indicator.
Step-by-step explanation:
In acid/base titrations, an indicator is used to determine the endpoint of the titration, which is the point at which the acid and base are stoichiometrically equivalent. The indicator undergoes a color change when the pH of the solution matches the pKa of the indicator.
The pKa of an indicator is the pH at which the indicator is 50% protonated and 50% deprotonated. It is at this point that the indicator undergoes a color change. Therefore, when the pH of the solution is equal to the pKa of the indicator, the color change occurs, indicating the endpoint of the titration.
to know more about pH visit:
https://brainly.com/question/2288405
#SPJ11
Directions: Solve the following problems using the GRADS-IDEA method and upload your scans or typed responses. 1. During the process of fermentation, glucose breaks down into ethanol and carbon dioxide. a. Write the balanced equation for this reaction. b. Using standard heat of formation values, calculate the heat of reaction if 20 mol of glucose are degraded in this reaction. C. Suppose the reaction does not go to completion. Calculate the heat of reaction if the fractional conversion of glucose is 0.7.
a. The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
b. Heat of reaction is -1378 KJ/mol.
c. Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.
Given that,
a. We have to find the balanced equation for this reaction.
The balance equation for fermentation of glucose is
C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
Therefore, The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
b. We have to calculate the heat of reaction if 20 mol of glucose are degraded in this reaction using standard heat of formation values.
Standard heat of formation of Glucose is 1273.3 KJ/mol
Standard heat of formation of Ethanol is 277.6 KJ/mol
Standard heat of formation of Carbon dioxide is 393.5 KJ/mol
Number of mole of glucose are 20 mole
Number of moles of ethanol formed in complete reaction is 2×20 = 40 mole
Number of moles of Carbon Dioxide formed in complete reaction is 2×20 = 40 mole
Heat of reaction = ΔH (products) – ΔH (reactants)
So,
Heat of products is 40 × (-277.6) + 40 × (-393.5) = -26,844 KJ/mol
Heat of reactants is 20 × (-1273.3)= -25,466 KJ/mol
Heat of reaction = -26,844 - (-25,466)= -1378 KJ/mol
Therefore, Heat of reaction is -1378 KJ/mol.
c. Let the reaction does not go to completion.
In the event where the fractional conversion of glucose is 0.7, we must determine the heat of reaction.
The fractional conversion of glucose is 0.7
Number of glucose that will react = 0.7 × 20 = 14 mole
So, only 14 mole of glucose will react. Rest 6 moles would not undergo reaction and there will not be considered.
Number of moles of ethanol formed = 2 × 14= 28 mole
Number of moles of carbon dioxide formed= 28 mole
Now calculation heat of reaction
Heat of products is 28 × (-277.6) + 28 × (-393.5) = -18790.8 KJ/mol
Heat of reactants is 14 × (-1273.3)= -17826.2 KJ/mol
Heat of reaction = -18790.8 - (-17826.2)= -964.6 KJ/mol
Therefore, Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.
To know more about reaction visit:
https://brainly.com/question/517776
#SPJ4
How many moles of KBr will be produced from 7.92 moles of K2SO4
according to the balanced chemical reaction below. 2AlBr3 + 3K2SO4
--> 6KBr + Al2(SO4)3
To determine the number of moles of KBr produced from a given amount of K2SO4, we need to use the balanced chemical equation and the stoichiometric coefficients.
From the equation, we can calculate the mole ratio between K2SO4 and KBr to find the answer.
The balanced chemical equation for the reaction between K2SO4 and KBr is as follows:
K2SO4 + 2KBr → 3KBr + K2SO4
From the equation, we can see that for every 1 mole of K2SO4, 3 moles of KBr are produced. This means there is a 1:3 mole ratio between K2SO4 and KBr.
To find the number of moles of KBr produced from 7.92 moles of K2SO4, we can multiply the given amount by the mole ratio:
7.92 moles K2SO4 * (3 moles KBr / 1 mole K2SO4) = 23.76 moles KBr
Therefore, 7.92 moles of K2SO4 will produce 23.76 moles of KBr according to the stoichiometry of the balanced equation.
Learn more about K2SO4 from the given link;
https://brainly.com/question/13161298
#SPJ11
Which of the following observations is consistent with a zero order reaction?a. A graph of reactant concenration vs time is linear b. The half life of the reaction gets longer as concentration decreases c. A graph of inverse reactant concentration vs time is linear d.The half life of the reaction is independent of concentration
a). A graph of reactant concenration vs time is linear. is the correct option. The observation that is consistent with a zero-order reaction is "A graph of reactant concentration vs time is linear."
The zero-order reaction is a reaction where the rate of reaction is independent of the concentration of reactants, i.e., the reaction rate is constant. A zero-order reaction is characterized by a linear graph of concentration vs time. Here are the observations for each option: b.The half-life of the reaction gets longer as concentration decreases. This observation is consistent with the first-order reaction. c. A graph of inverse reactant concentration vs time is linear.
This observation is consistent with the second-order reaction. d.The half-life of the reaction is independent of concentration. This observation is consistent with the zero-order reaction, however, it is not the observation that is specifically related to a zero-order reaction.
To know more about zero-order reaction visit:
brainly.com/question/13490912
#SPJ11
Write the mechanism of fisher Esterification reaction of Benzoic acid and methanol.
Fischer esterification is the reaction of a carboxylic acid with an alcohol to produce an ester in the presence of a catalyst. When benzoic acid and methanol are reacted, benzyl alcohol is produced as an ester.
The reaction is acid-catalyzed, so the catalytic substance is usually a mineral acid such as sulfuric or hydrochloric acid. Protonation of Carboxylic AcidFirst, protonation of carboxylic acid takes place in the presence of a catalyst. In the first step of this reaction, the carboxylic acid is protonated by the catalyst, which creates a more reactive electrophile that is highly susceptible to nucleophilic attack. As a result, an intermediate is produced that is highly reactive. Nucleophilic Attack
The nucleophilic attack of the alcohol on the intermediate occurs in the second step of the Fischer esterification reaction. The nucleophilic attack of the alcohol results in the formation of an intermediate that is an alkoxide ion. Deprotonation The protonation of the alkoxide ion takes place in the final step of the Fischer esterification reaction. The deprotonation results in the formation of the ester.
To know more about Fischer esterification visit:
brainly.com/question/32632483
#SPJ11
Calculate the initial rate of the reaction between NH4+ and NO2–. The concentration of NH4+ and NO2– are 0.21 and 0.10 M, respectively. The rate is first order with respect to both reactant. The rate constant is 2.6 x 10–4 M–1s–1
The concentration of [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] are 0.21 and 0.10 M, respectively, so the initial rate of the reaction between [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] is 1.1 x 10⁻⁵ M/s.
The initial rate of the reaction between [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] is calculated using the formula: Initial rate = [tex]k [NH_{4} ^{+}][NO_{2}^{-} ][/tex], where k is the rate constant, [tex][NH_{4} ^{+}][/tex] is the concentration of [tex]NH_{4} ^{+}[/tex], and [tex][NO_{2}^{-}][/tex] is the concentration of [tex]NO_{2}^{-}[/tex].
The concentration of [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] are 0.21 and 0.10 M respectively. The rate is first order with respect to both reactants. The rate constant is 2.6 x 10⁻⁴ M⁻¹s⁻¹.
The formula to calculate the initial rate of the reaction between [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] is:
Initial rate = k[NH4+][NO2–] Where k is the rate constant and [tex][NH_{4} ^{+}][/tex] and [NO_{2}^{-}][/tex] are the concentration of [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] respectively.
The given values are substituted in the above formula to obtain the initial rate of the reaction.
Initial rate = 2.6 x 10⁻⁴ M⁻¹s⁻¹ x 0.21 M x 0.10
MInitial rate = 1.1 x 10⁻⁵ M/s
Therefore, the initial rate of the reaction between [tex]NH_{4} ^{+}[/tex] and [tex]NO_{2}^{-}[/tex] is 1.1 x 10⁻⁵ M/s.
To know more about initial rate, visit :
brainly.com/question/19732795
#SPJ11
Two samples of sodium chloride were decomposed into their constituent elements. One sample produced 9.3 g of sodium and 14.3 g of chlorine, and the other sample produced 3.78 g of sodium and 5.79 of chlorine. Are these results consistent with the law of constant composition?
A= Yes
B= No
The correct answer is A) Yes.
The law of constant composition or the law of definite proportions, also recognized as
Proust's Law
, is a law that states that the components of a pure compound are always combined in the same proportion by weight.
As a result, the
compound
will always have the same relative mass of the components.
Let's use this law to solve the problem.
Firstly, we have to calculate the percentage of Na and Cl in both samples as follows:
Mass
percent of Na = (Mass of Na / Total mass of compound) × 100
Mass percent of Cl = (Mass of Cl / Total mass of compound) × 100
First sample:
Mass percent of Na = (9.3 g / (9.3 + 14.3) g) × 100 = 39.37%
Mass percent of Cl = (14.3 g / (9.3 + 14.3) g) × 100 = 60.63%
Second sample:
Mass percent of Na = (3.78 g / (3.78 + 5.79) g) × 100 = 39.53%
Mass percent of Cl = (5.79 g / (3.78 + 5.79) g) × 100 = 60.47%
As you can see, the percentage of Na and Cl in both samples are almost the same. It means the ratios of Na to Cl are the same.
Thus, these results are consistent with the law of constant composition.
Learn more about
Proust's Law
from the given link:
https://brainly.com/question/30854941
#SPJ11