Control rods enter from the bottom of a Boiling Water Reactor (BWR) for safety and reactor stability, while neutrons in a reactor can be absorbed through mechanisms such as capture by nuclei and scattering/absorption by the moderator.
Control rods enter from the bottom of a Boiling Water Reactor (BWR) for the following reasons:
a) Safety: By inserting control rods from the bottom, they can be rapidly lowered into the reactor core to shut down or control the nuclear reaction in case of an emergency or abnormal operating conditions.
b) Reactor Stability: Placing control rods at the bottom helps in maintaining the desired power level and stability of the reactor by effectively moderating and absorbing neutrons near the lower regions of the core.
Neutrons in a reactor can be absorbed through various mechanisms, including:
a) Capture by Nuclei: Neutrons can be absorbed by atomic nuclei, leading to nuclear reactions such as neutron capture or (n,γ) reactions. Examples of elements with high neutron absorption cross-sections include boron-10 and cadmium-113.
b) Scattering and Absorption by Moderator: Neutrons can be scattered or absorbed by the moderator material used in the reactor, such as water or graphite. This interaction can affect the neutron energy and population within the reactor core, influencing the overall reactivity and power output.
To know more about neutron,
https://brainly.com/question/33360596
#SPJ11
Calculate the standard cell potential for a battery based on the following reactions: Sn2+ + 2e → Sn(s) E° = -0.14 V Au3+ + 3e- Au(s) E° = +1.50 V b) What is the potential if the [Au3+] = 4.37x10-3 M and [Sn2+] = 1.65 M?
The potential for the given concentrations of [Au3+] = 4.37x10^-3 M and [Sn2+] = 1.65 M is approximately 1.7368 V.
To calculate the standard cell potential for a battery based on the given reactions, we need to use the Nernst equation. The Nernst equation relates the cell potential to the concentrations of the reactants involved in the cell reaction. The Nernst equation is given by:
E = E° - (RT/nF) * ln(Q)
Where:
E = cell potential
E° = standard cell potential
R = gas constant (8.314 J/(mol·K))
T = temperature in Kelvin
n = number of electrons transferred in the cell reaction
F = Faraday's constant (96,485 C/mol)
ln = natural logarithm
Q = reaction quotient
First, let's calculate the standard cell potential (E°) for the given reactions:
For the reaction: Sn2+ + 2e- → Sn(s)
The standard cell potential (E°) is given as -0.14 V.
For the reaction: Au3+ + 3e- → Au(s)
The standard cell potential (E°) is given as +1.50 V.
Now, we can calculate the potential (E) for the given concentrations:
[Au3+] = 4.37x10^-3 M
[Sn2+] = 1.65 M
We can find the reaction quotient (Q) by taking the concentration of the product raised to the power of its coefficient divided by the concentration of the reactant raised to the power of its coefficient. Since the coefficients for both reactions are 1, the reaction quotient (Q) is simply the ratio of the product concentration to the reactant concentration.
Q = [Au3+]/[Sn2+]
= (4.37x10^-3 M)/(1.65 M)
= 2.6515x10^-3
Now, we can substitute the values into the Nernst equation:
E = E° - (RT/nF) * ln(Q)
Since both reactions involve the transfer of electrons, the value of n is 2.
Let's assume a temperature of 298 K:
E = (1.50 V) - ((8.314 J/(mol·K))*(298 K)/(2*(96,485 C/mol)) * ln(2.6515x10^-3)
Simplifying the calculation, we get:
E ≈ 1.50 V - 0.0400 V * ln(2.6515x10^-3)
E ≈ 1.50 V - 0.0400 V * (-5.92)
E ≈ 1.50 V + 0.2368 V
E ≈ 1.7368 V
Therefore, the potential for the given concentrations of [Au3+] = 4.37x10^-3 M and [Sn2+] = 1.65 M is approximately 1.7368 V.
Know more about potential:
https://brainly.com/question/28300184
#SPJ11
Consider the vector field F = (4x + 3y, 3x + 2y) Is this vector field Conservative? [Conservative If so: Find a function f so that F = Vf f(x,y) = Use your answer to evaluate Question Help: Video + K [F. dr along the curve C: F(t) = tºi+t³j, 0
The vector field F = (4x + 3y, 3x + 2y) is not conservative, so there is no potential function for it.
To determine if the vector field F = (4x + 3y, 3x + 2y) is conservative, we need to check if its components satisfy the condition of conservative vector fields.
The vector field F = (4x + 3y, 3x + 2y) is conservative if its components satisfy the following condition:
∂F/∂y = ∂F/∂x
Let's compute the partial derivatives:
∂F/∂y = 3
∂F/∂x = 4
Since ∂F/∂y is not equal to ∂F/∂x, the vector field F is not conservative.
Therefore, we cannot find a function f such that F = ∇f.
As a result, we cannot evaluate the line integral ∫C F · dr along the curve C: r(t) = t^2i + t^3j, 0 ≤ t ≤ 1, using the potential function because F is not a conservative vector field.
To learn more about function click here
brainly.com/question/30721594
#SPJ11
A 18" square column is reinforced with four #11 bars, one in each corner. The cover distances are 3" to the steel bar center in each direction. The concrete compressive strength is f'c = 4000 psi and the steel yield strength is fy = 60000 psi. Construct the interaction diagram relating Pn and Mn for bending about an axis parallel to one face. To construct the diagram, calculate the coordinates for the points of pure compression, pure bending, and balanced failure. In addition, calculate the coordinates of the points corresponding to strains in the tensile steel of 2ɛy and Ɛy/2. On the same graph, plot the design strength curve relating oPn and Mn. Is the column an acceptable choice for resisting an axial load of Pu = 400 kips with an eccentricity e = = 5"?
The strain of 2y has the coordinates (Pn, Mn) = (360 kips, 45 kip-in).Calculating the coordinates for the locations of pure compression, pure bending, and balanced failure is necessary in order to build the interaction diagram for the given reinforced concrete column.
Additionally, we will calculate the coordinates for strains in the tensile steel of 2ɛy and Ɛy/2. We will also plot the design strength curve relating oPn and Mn.
Finally, we will determine if the column is an acceptable choice for resisting an axial load of Pu = 400 kips with an eccentricity of e = 5".
Column size: 18" square
Four #11 bars in each corner
Cover distance: 3" to the steel bar center
Concrete compressive strength: f'c = 4000 psi
Steel yield strength: fy = 60000 psi
Axial load: Pu = 400 kips
Eccentricity: e = 5"
First, let's calculate the coordinates for the points of pure compression, pure bending, and balanced failure:
Pure Compression:
At pure compression, there is no bending moment, so Mn = 0. Therefore, the coordinates for pure compression are (Pn, Mn) = (Pu, 0).
Pure Bending:
At pure bending, there is no axial load, so Pn = 0. Therefore, the coordinates for pure bending are (Pn, Mn) = (0, Mu).
Balanced Failure:
Balanced failure occurs when both concrete and steel reach their yield strengths. To calculate the coordinates, we need to determine the capacity of the concrete and steel.
Concrete capacity:
The capacity of the concrete can be calculated using the formula:
Pn = 0.85 * Ac * f'c
where Ac is the area of the column cross-section.
Given that the column is square with a side length of 18", the area is:
Ac = (18")^2 = 324 in^2
Substituting the values, we have:
Pn = 0.85 * 324 in^2 * 4000 psi ≈ 1,101,600 lbs ≈ 1101.6 kips
Steel capacity:
The capacity of the steel can be calculated using the formula:
Mn = As * fy * (d - c/2)
where As is the total area of steel bars, fy is the yield strength of steel, d is the effective depth, and c is the cover distance.
Given that there are four #11 bars, the total area of steel is:
As = 4 * (0.75 in^2) = 3 in^2
The effective depth is the distance from the extreme fiber to the centroid of steel, which is half the side length minus the cover distance:
d = (18"/2) - 3" = 6" - 3" = 3"
Substituting the values, we have:
Mn = 3 in^2 * 60000 psi * (3" - 1.5") ≈ 540,000 in-lbs ≈ 45 kip-in
Therefore, the coordinates for balanced failure are (Pn, Mn) = (1101.6 kips, 45 kip-in).
Next, let's calculate the coordinates for strains in the tensile steel of 2ɛy and Ɛy/2:
Strain of 2ɛy:
The strain in the tensile steel can be calculated using the formula:
ɛ = (σ - Es) / Es
where σ is the stress in the steel, Es is the modulus of elasticity of steel, and ɛ is the strain.
The stress in the steel can be calculated as:
σ = Pn / As
Given that the strain is 2ɛy, we can rearrange the formula to solve for Pn:
Pn = 2ɛy * As * Es
Substituting the values, we have:
Pn = 2 * (fy / Es) * As * Es = 2 * fy * As
Substituting the values, we have:
Pn = 2 * 60000 psi * 3 in^2 = 360,000 lbs ≈ 360 kips
The moment at this strain is the capacity moment for the steel, which we calculated earlier as 45 kip-in.
Strain of Ɛy/2:
Using a similar approach as above, we can calculate the coordinates for the strain of Ɛy/2. Substituting the values, we have:
Pn = (fy / Es) * As
Pn = (60000 psi / Es) * 3 in^2 = 180,000 lbs ≈ 180 kips
The moment at this strain is again the capacity moment for the steel, which is 45 kip-in.
Therefore, the coordinates for the strain of Ɛy/2 are (Pn, Mn) = (180 kips, 45 kip-in).
Now, let's plot the design strength curve relating oPn (Pn divided by the column cross-sectional area) and Mn. The design strength curve will be a straight line passing through the points of pure compression, balanced failure, and pure bending.
Design strength curve:
Start by calculating the cross-sectional area of the column:
A = (18")^2 = 324 in^2
Coordinates for the design strength curve:
(0, 0) - Pure Compression
(1101.6 kips / 324 in^2, 45 kip-in) - Balanced Failure
(0, Mu) - Pure Bending
Plot these points on a graph with Pn divided by A (oPn) on the x-axis and Mn on the y-axis. Connect the points with a straight line to complete the design strength curve.
Finally, to determine if the column is acceptable for resisting an axial load of Pu = 400 kips with an eccentricity e = 5", we need to check if this point lies below or above the design strength curve. Plot the point (Pu / A, Pu * e) on the graph and check if it lies below the design strength curve. If it does, the column is acceptable; if it lies above, the column is not acceptable.
Learn more about eccentricity from the given link!
https://brainly.com/question/1939300
#SPJ11
value. For Most of the w students his ma wage is Rs. 410, find the wages of the person who A shoe seller sells 100 pairs of shoes everyday in average. Out of which he sells about 55 pairs of shoes of 40 number of size. Which number of shoes does he order from the wholeseller? bu 35 students of grade 7 in final examination are presented TL
The shoe seller sells about 110 shoes of size 40 daily.
To find the wages of the person who sells shoes, we need additional information. The given information does not provide any direct relationship between the number of pairs of shoes sold and the wages of the person. Please provide more details or clarify the information to help determine the wages of the person.
Regarding the shoe seller's order from the wholesaler, we can calculate the number of shoes he orders of a specific size based on the given information. Here's how:
The shoe seller sells 100 pairs of shoes every day on average, and out of those, 55 pairs are of size 40.
Since a pair consists of two shoes, we can calculate the total number of shoes sold of size 40 as follows:
Number of shoes sold of size 40 = 55 pairs x 2 = 110 shoes.
As a result, the shoe store sells roughly 110 pairs of size 40 shoes each day.
for such more question on wages
https://brainly.com/question/15530787
#SPJ8
Fill in the blank.
The only solution of the initial-value problem y" + x^2y= 0, y(0) = 0, y'(0) = 0 is________
The only solution of the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0) is the zero function, (y(x) = 0).
Collecting like terms and equating coefficients of like powers of (x) to zero, we find that all the coefficients except (a_0) and (a_1) must be zero.
To solve the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0), we assume a power series solution of the form (y(x) = \sum_{n=0}^{\infty} a_nx^n).
Differentiating this series twice, we get (y''(x) = \sum_{n=0}^{\infty} (n+2)(n+1)a_{n+2}x^n).
Substituting these expressions into the differential equation, we have:
[\sum_{n=0}^{\infty} (n+2)(n+1)a_{n+2}x^n + x^2\sum_{n=0}^{\infty} a_nx^n = 0.]
Collecting like terms and equating coefficients of like powers of (x) to zero, we find that all the coefficients except (a_0) and (a_1) must be zero. Since (y(0) = 0) and (y'(0) = 0), we have (a_0 = 0) and (a_1 = 0).
Therefore, the only solution to the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0) is the zero function, (y(x) = 0).
Learn more about initial-value problem:
https://brainly.com/question/30883066
#SPJ11
The most common crystallisation strategies in pharmaceutical purification are cooling crystallisation, evaporation crystallisation, anti-solvent crystallisation, or their combinations. Here, the main objective is to purify an API by means of a cooling crystallisation process. Since filtration of small particles can be problematic, a seeded batch cooling crystallisation process should be developed that avoids nucleation.
Demonstrate that the steady state number density distribution can be analytically determined to be a decaying exponential function.
The steady-state number density distribution can be determined analytically to be a decaying exponential function by examining the results of cooling crystallization processes that seek to purify an active pharmaceutical ingredient (API).
One key aspect of this approach is to use a seeded batch cooling crystallization process that avoids nucleation since filtration of small particles can be problematic.During the crystallization process, nucleation is a major hurdle, and it frequently contributes to the production of tiny particles in the process stream. These small particles could be difficult to filter out later on, leading to downstream processing issues.
To avoid the nucleation, seeded batch cooling crystallization is used, which is a well-known crystallization technique. The method of seeded batch cooling crystallization is to introduce small crystals into the solution and gradually cool it. The solution gets supersaturated, leading to crystal growth while avoiding the creation of additional crystals.
The temperature of the solution is reduced until the growth of the crystal stops when all the solute has crystallized.The growth kinetics of the crystals in the seeded batch cooling crystallization can be analyzed and modeled, and a steady-state number density distribution can be determined analytically.
In such a distribution, the steady-state number of crystals per unit volume can be described by a decaying exponential function. Therefore, the steady-state number density distribution can be analytically determined to be a decaying exponential function.
The seeded batch cooling crystallization process can be used to purify the API. Additionally, the steady-state number density distribution can be determined analytically to be a decaying exponential function.
To know more about density distribution visit :
brainly.com/question/6842814
#SPJ11
What is the activation diameter at 0.3% supersaturation for particles consisting of 50% (NH4)2SO4, 30% NH4NO3 and 20% insoluble material?
The activation diameter at 0.3% supersaturation for particles comprising of 50% (NH4)2SO4, 30% NH4NO3, and 20% insoluble material is approximately 0.078 µm.
Activation diameter: The size of particles that can activate cloud droplets at a specific supersaturation is referred to as the activation diameter.
The activation diameter is influenced by factors such as the chemical composition and the atmospheric relative humidity or saturation condition, and it is essential in estimating the number concentration of droplets in clouds.
(NH4)2SO4 and NH4NO3 are the two most abundant atmospheric aerosols, which form secondary organic aerosols (SOAs) from the oxidation of volatile organic compounds.
SOAs are known to be one of the most significant drivers of adverse health outcomes related to air quality.
They contribute to respiratory and cardiovascular diseases and mortality.
Know more about diameter here:
https://brainly.com/question/30460318
#SPJ11
What is the formula for iron(II) nitrate?
A )Fe(NO_2) _3
B) Fe(NO₂)₂
The formula for iron(II) nitrate is Fe(NO₂)₂. The formula for iron(II) nitrate is determined by using the valency of iron and nitrate.
Here, iron has a valency of 2. On the other hand, nitrate (NO2-) has a valency of 1. Fe(NO2)2 is used to represent iron(II) nitrate.
It has two nitrate ions, each with a negative charge, and one iron ion with a positive charge.
Therefore, Fe(NO₂)₂ represents iron(II) nitrate.
To know more about iron(II) nitrate visit :
brainly.com/question/31428625
#SPJ11
I need a step by step explanation please Thank you so much
======================================================
Work shown for part (a)
tan(x) = tan(x-180)
tan(265) = tan(265-180)
tan(265) = tan(85)
-------------------------
Work shown for part (b)
sine = opposite/hypotenuse = 2/3
opposite = 2 and hypotenuse = 3
Use a = 2 and c = 3 to determine b in the pythagorean theorem.
[tex]a^2+b^2 = c^2\\\\2^2+b^2 = 3^2\\\\4+b^2 = 9\\\\b^2 = 9-4\\\\b^2 = 5\\\\b = \sqrt{5}\\\\[/tex]
adjacent = [tex]\sqrt{5}[/tex] and opposite = 2
[tex]\cot(\theta) = \frac{\text{adjacent}}{\text{opposite}}\\\\\cot(\theta) = \frac{\sqrt{5}}{2}\\\\[/tex]
-------------------------
Work shown for part (c)
[tex]\frac{5}{2}\cos(\theta)+4 = 2\\\\\frac{5}{2}\cos(\theta) = 2-4\\\\\frac{5}{2}\cos(\theta) = -2\\\\\cos(\theta) = -2*(\frac{2}{5})\\\\\cos(\theta) = -\frac{4}{5}\\\\[/tex]
[tex]\theta = \pm\arccos\left(-\frac{4}{5}\right)+360n \ \ \text{ .... where n is an integer} \\\\\theta = \pm143.1301+360n\\\\\theta = 143.1301+360n \ \text{ or } \ \theta = -143.1301+360n\\\\[/tex]
Here's a table of values for selected inputs of n
[tex]\begin{array}{|c|c|c|} \cline{1-3}n & 143.1301+360n & -143.1301+360n\\\cline{1-3}-1 & -216.8699 & -503.1301\\\cline{1-3}0 & 143.1301 & -143.1301\\\cline{1-3}1 & 503.1301 & 216.8699\\\cline{1-3}2 & 863.1301 & 576.8699\\\cline{1-3}\end{array}[/tex]
The results 143.1301 and 216.8699 are in the interval [tex]0^{\circ} < \theta < 360^{\circ}[/tex], which makes them the two approximate solutions.
You can use graphing software such as GeoGebra or Desmos to confirm the answers.
the function is ______ when it is symmetrical over the y-axis.
Answer:
Even function
Step-by-step explanation:
the function is __Even Function___ when it is symmetrical over the y-axis.
Question 4 DSMC Import Company developed a new processing line for which the delivered equipment cost was $1.75 million. This year, the board of directors decided to expand into new markets and expects to build the current version of the same line. Estimate the cost if the following factors are applicable: construction cost factor is 0.15, installation cost factor is 0.51, indirect cost factor applied against equipment is 0.19. Round your answer to 2 decimal places.
the estimated cost of building the current version of the processing line, considering the given factors, is $3,237,500.
To estimate the cost of building the current version of the processing line, we need to consider the construction cost factor, installation cost factor, and indirect cost factor applied against the equipment. Let's calculate the cost using the given factors:
Construction cost = Construction cost factor * Delivered equipment cost
= 0.15 * $1.75 million
= $262,500
Installation cost = Installation cost factor * Delivered equipment cost
= 0.51 * $1.75 million
= $892,500
Indirect cost = Indirect cost factor * Delivered equipment cost
= 0.19 * $1.75 million
= $332,500
Total cost = Delivered equipment cost + Construction cost + Installation cost + Indirect cost
= $1.75 million + $262,500 + $892,500 + $332,500
= $3,237,500
To know more about factors visit:
brainly.com/question/14549998
#SPJ11
5. (a) (3 points) If f(x) dx = F(x) and a 40 and b are two real numbers, then evaluate the following integral: Lecture note substitution) [f(ax + b) dz
The integral ∫f(ax + b) dz can be evaluated as F((ax + b)/a) + C, where C is the constant of integration.
To evaluate the integral, we can use the substitution method. Let u = ax + b, then du/dz = a, and dz = du/a. Substituting these values into the integral, we have: ∫f(ax + b) dz = ∫f(u) (du/a)
Now we can replace the variable of integration with u and divide by a: = (1/a) ∫f(u) du
Since f(x) dx = F(x), we can rewrite the integral as: = (1/a) F(u) + C
Substituting back u = ax + b: = (1/a) F(ax + b) + C
Therefore, the evaluated integral is F((ax + b)/a) + C.
To learn more about integration click here
brainly.com/question/31744185
#SPJ11
5. Calculate the Vertical reaction of support A. Take E as 11 kN, G as 5 KN, H as 4 kN. also take Kas 10 m, Las 5 m, N as 11 m. 5 MARKS HEN H EkN HEN T G km GEN Lm oE Ε Α. IB C D Nm Nm Nm Nm
The vertical reaction at support A can be calculated using the principle of static equilibrium. Given the values of E (11 kN), G (5 kN), H (4 kN), Kas (10 m), Las (5 m), and N (11 m), the vertical reaction at support A can be determined as 11 kN.
Apply the principle of static equilibrium: The vertical reaction at support A can be determined by analyzing the forces acting on the structure and applying the principle of static equilibrium, which states that the sum of all vertical forces must be equal to zero for the structure to remain in equilibrium.Calculate the vertical forces: The vertical forces acting on the structure include the applied loads and reactions. In this case, the applied vertical loads are E, G, and H (11 kN, 5 kN, and 4 kN, respectively).Consider the reactions: There are two vertical reactions at the supports, one at support A and the other at support B. Let's assume the vertical reaction at support A is R_A and at support B is R_B.Set up the equilibrium equation: The sum of all vertical forces must be equal to zero. Therefore, R_A + R_B - (E + G + H) = 0.Solve for R_A: Substitute the given values into the equilibrium equation and solve for R_A.
R_A + R_B - (11 kN + 5 kN + 4 kN) = 0
R_A + R_B - 20 kN = 0
R_A = 20 kN - R_B
Apply the equation for vertical equilibrium at support B: In this case, the only vertical force acting at support B is the reaction R_B. Applying the vertical equilibrium at support B, we get: R_B = (Kas/N) * E + (Las/N) * G
Substitute the value of R_B in the equation for R_A:
R_A = 20 kN - ((Kas/N) * E + (Las/N) * G)
Calculate the values of Kas/N and Las/N: Using the given values, we find:
Kas/N = 10 m / 11 m ≈ 0.909
Las/N = 5 m / 11 m ≈ 0.455
Substitute the values of E, G, Kas/N, and Las/N into the equation for R_A and solve:
R_A = 20 kN - (0.909 * 11 kN + 0.455 * 5 kN)
R_A ≈ 20 kN - (10 kN + 2.275 kN)
R_A ≈ 20 kN - 12.275 kN
R_A ≈ 7.725 kN
The vertical reaction at support A (R_A) is approximately 7.725 kN. This result is obtained by considering the principle of static equilibrium and analyzing the forces acting on the structure.
Learn more about Vertical Reaction:
https://brainly.com/question/33807946
#SPJ11
Table Q1(d)(ii): Test and Analysis Parameters for Asphaltic Concrete (JKR/SPJ/2008-S4) Parameter Wearing Course Binder Course >8000 N Stability (S) >8000 N Flow (F) 2.0-4.0 mm 2.0-4.0 mm Stiffness (S/F) >2000 N/mm >2000 N/mm Air voids in mix (VTM) 3.0-5.0% 3.0-7.0% > Voids in aggregates filled with 70-80% 65-75% bitumen (VFB) (c) A horizontal curve is designed for a two-lane road in mountainous terrain. The following data are for geometric design purposes: - = 2700 + 32.0 Station (point of intersection) Intersection angle Tangent length = 40° to 50° = 130 to 140 metre Side friction factor = 0.10 to 0.12 Superelevation rate = 8% to 10% Based on the information: (i) Provide the descripton for A, B and C in Figure Q2(c). (ii) Determine the design speed of the vehicle to travel at this curve. (iii) Calculate the distance of A in meter. (iv) Determine the station of C.
The description of points A, B, and C in Figure Q2(c) can be determined based on the provided information. Point A represents the point of intersection on the two-lane road in mountainous terrain. Point B refers to the end of the tangent length, while Point C represents the station along the road. The design speed of the vehicle to travel at this curve can be calculated using the given data. The distance of point A can be determined using the intersection angle and tangent length. Finally, the station of point C can be found based on the provided information.
Point A: Represents the point of intersection on the two-lane road in mountainous terrain.Point B: Refers to the end of the tangent length, which is the straight section before the curve.Point C: Represents the station along the road.Design speed of the vehicle: It can be determined using the given information on intersection angle, tangent length, side friction factor, and superelevation rate.Distance of point A: Calculate using the intersection angle and tangent length, which is given as 130 to 140 meters.Station of point C: The station can be determined based on the given data on tangent length and the distance of point A.Point A represents the point of intersection, point B is the end of the tangent length, and point C represents the station along the road. The design speed of the vehicle can be calculated using the provided data, and the distance of point A can be determined using the intersection angle and tangent length. The station of point C can be found based on the given information.
Learn more about Curve Design :
https://brainly.com/question/30760797
#SPJ11
11. Which of the following is not a major advantage of the use of rigid foam insulation in EIFS? increased energy efficiency 9 easy incorporation of facade details h increased impact resistance 12. Wh
The all represent major advantages of the use of rigid foam insulation in EIFS.
One major advantage of the use of rigid foam insulation in EIFS (Exterior Insulation and Finish Systems) is increased energy efficiency. Rigid foam insulation has a high R-value, which measures its thermal resistance. This means it can effectively reduce heat transfer, keeping the interior of a building cooler in hot weather and warmer in cold weather. By minimizing heat loss or gain, rigid foam insulation can help reduce energy consumption for heating and cooling, leading to potential energy savings.
Another advantage of using rigid foam insulation in EIFS is easy incorporation of facade details. The rigid foam boards can be easily cut and shaped to accommodate architectural features, such as window openings, corners, and decorative elements. This allows for seamless integration of these details into the exterior finish system, creating a visually appealing facade.
Additionally, rigid foam insulation offers increased impact resistance. The foam boards are sturdy and can withstand certain levels of impact, protecting the underlying structure from damage. This can be particularly beneficial in areas prone to extreme weather conditions or potential impacts, such as hailstorms or flying debris.
However, the question asks for the major advantage that is NOT associated with the use of rigid foam insulation in EIFS.
Out of the given options, increased energy efficiency, easy incorporation of facade details, and increased impact resistance are all major advantages of using rigid foam insulation in EIFS.
Therefore, none of the options provided is the correct answer as they all represent major advantages of the use of rigid foam insulation in EIFS.
Learn more about insulation with the given link,
https://brainly.com/question/1472743
#SPJ11
Describe the mechanism of post-combustion carbon capture and sequestration method. Is this method feasible in Hong Kong?
While post-combustion carbon capture and sequestration method is technically feasible in Hong Kong, the economic and social feasibility of this technology in the city remains uncertain.
Post-combustion carbon capture and sequestration method is the process of capturing CO2 from the flue gases after combustion of fossil fuels in the power plants. It is the most mature technology and suitable for most industrial applications.
The capture of carbon dioxide from the flue gas stream is carried out by a physical solvent, amine-based solvents, or membrane technology. These technologies are energy-intensive, which results in high capture costs.
Amines can be used to absorb the CO2 from the flue gas and then regenerate the solvent by removing CO2 at high temperature. The CO2 is then liquefied for transportation and storage in underground geological formations. Carbon capture and sequestration (CCS) is a highly effective and promising technology for reducing CO2 emissions from large point sources.
According to the International Energy Agency, CCS is one of the most important technologies for reducing CO2 emissions to the level required to limit global temperature increases to two degrees Celsius.
Hong Kong has been exploring the feasibility of implementing CCS technology since 2008. However, the implementation of CCS in Hong Kong would face several challenges.
Hong Kong has a high population density and limited land availability, making it difficult to find suitable sites for CO2 storage. The technology is also expensive, and the city lacks government incentives to encourage companies to adopt CCS.
Finally, Hong Kong is highly dependent on imported electricity, and CCS may increase the cost of electricity to an extent that it may not be feasible for the city.
Therefore, while post-combustion carbon capture and sequestration method is technically feasible in Hong Kong, the economic and social feasibility of this technology in the city remains uncertain.
To know more about Amines, visit:
https://brainly.com/question/31391643
#SPJ11
7.In 1870, a survey line was found to have a magnetic bearing of S7°W. The true bearing of the line is S4°E. If the magnetic declination today is 7°W, what is the magnetic bearing of the line today
Therefore, the magnetic bearing of the line today = 11 - 7 = 4°E i.e., S11°E.
The magnetic bearing of the line today is S11°E. When we talk about magnetic bearing, it is the angle between the magnetic north and the line of direction measured in the horizontal plane. While, the true bearing is the angle between the true north and the line of direction measured in the horizontal plane.
Magnetic bearing can be calculated by adding or subtracting the magnetic declination (variation). Here, the magnetic declination is 7°W (which means that the magnetic north is 7 degrees west of the true north) which was found in the year 1870. Since then, the magnetic declination has changed.
This change is called secular variation.
Hence, the magnetic bearing of the line today can be calculated as follows: Since the magnetic bearing is S7°W and the true bearing is S4°E, then the angular difference between the two bearings
= 7 + 4 = 11 degrees i.e.,
11 degrees between the true north and magnetic north.
As magnetic north is 7 degrees west of the true north, we need to subtract 7 degrees from the angle of 11 degrees to get the angle between the line and magnetic north which will give us the magnetic bearing of the line today.
Know more about the magnetic bearing
https://brainly.com/question/33332828
#SPJ11
A short structural member of length 1, area a and modulus of elasticity e, subjected to a compression load of p. The member will: Elongated by pl/ae None of the above Shorten by pl/ae Buckle at n2 Ei/ll B
The short structural member, with a length of 1, an area of a, and a modulus of elasticity of e, is subjected to a compression load of p. In this scenario, the member will actually shorten by pl/ae.
To understand why the member shortens, we need to consider the properties of a structural member and the concept of elasticity. A structural member is a component that is designed to support loads and maintain the stability of a structure. In this case, the member is under compression, meaning it is being pushed inward.
The modulus of elasticity, denoted by e, is a measure of how much a material can deform when subjected to an external force. It represents the stiffness or rigidity of the material. When a material is compressed, the applied force causes the atoms or molecules within the material to move closer together, resulting in a decrease in length.
In this case, the member will shorten by an amount equal to pl/ae. Let's break down this formula:
- p represents the compression load applied to the member.
- l is the length of the member.
- a is the area of the member.
- e is the modulus of elasticity.
By multiplying the compression load (p) by the length (l) and dividing it by the product of the area (a) and modulus of elasticity (e), we can determine the amount by which the member shortens.
Therefore, the correct answer is "Shorten by pl/ae."
Learn more about elasticity:
https://brainly.com/question/30610639
#SPJ11
Marks Water enters a double-pipe counter-current flow heat exchanger (internal pipe diameter = 2.5 cm) at 17°C at a rate of 1.8 kg/s. The water is heated by steam condensing at 120C in the shell. If the overall heat transfer coefficient of the heat exchanger is 700 W/m2°C, determine the length of the tube required in order to heat the water to 80°C using (a) LMTD method [10 Marks] lot effective-NTU method [10 Marks] Fluid Properties: Water C = 4180 J/kgK, Steam hg = 2203 kJ/Kg
a. The length of the tube required to heat the water from 17°C to 80°C using the LMTD method is 94.4 m.
b. The length of the tube required to heat the water from 17°C to 80°C using the effectiveness-NTU method is also 94.4 m.
Determining the length of the tube requiredTo calculate the length of the tube required to heat water from 17°C to 80°C using a double-pipe counter-current flow heat exchanger
LMTD Method:
The formula to calculate the heat transfer is given as;
LMTD = (ΔT₁ - ΔT₂) / ln(ΔT₁ / ΔT₂))
where
ΔT₁ is the temperature difference between the hot and cold fluids at the inlet, and
ΔT₂) is the temperature difference between the hot and cold fluids at the outlet.
Using the LMTD method, calculate the heat transfer rate as:
Q = UA LMTD
where
Q is the heat transfer rate,
U is the overall heat transfer coefficient,
A is the heat transfer area, and
LMTD is the logarithmic mean temperature difference.
The difference between the hot and cold fluids at the inlet and outlet can be calculated as:
ΔT₁ = (120 - 17) = 103°C
ΔT₂ = (80 - 37.7) = 42.3°C
where the temperature of the cold fluid at the outlet is calculated using the energy balance equation:
mCpΔT = Q = UAΔTlm
where m is the mass flow rate, Cp is the specific heat capacity, and ΔTlm is the logarithmic mean temperature difference. Solving for ΔTlm, we get:
ΔTlm = [(103 - 42.3) / ln(103 / 42.3)]
= 60.8°C
The overall heat transfer coefficient is given as U = 700 W/m2°C, and the heat transfer area can be calculated using the internal diameter of the tube as
A = π d L = π (0.025) (L)
where d and l are the internal diameter length of the tube, respectively.
Substitute the values in the heat transfer rate equation
Q = UAΔTlm = (700) (π) (0.025) (L) (60.8) = 1331.8 L
The heat transfer rate can also be calculated using the energy balance equation as
mCpΔT = Q = m(hg - hf)
where
hg is the enthalpy of the steam at 120°C,
hf is the enthalpy of the water at 17°C, and
ΔT is the temperature difference between the hot and cold fluids.
Substitute the values
Q = (1.8) (4180) (80 - 17)
= 125793.6 W
Equate the two expressions for Q
1331.8 L = 125793.6
L = 94.4 m
Therefore, the length of the tube required to heat the water from 17°C to 80°C using the LMTD method is 94.4 m.
Learn more on heat transfer on https://brainly.com/question/2341645
#SPJ4
At Statsville High School, 125 students are taking university-preparation Science courses. Of these students, 64 take Biology, 40 take Chemistry, and 51 take Physics. There are 12 students who take both Chemistry and Physics, 11 who take both Chemistry and Biology, and 8 who take all three courses. How many students take just Physics and Biology? Illustrate your answer with a Venn diagram.
Using Venn diagram 7 students take just Physics and Biology.
To determine the number of students who take just Physics and Biology, we need to analyze the given information and use a Venn diagram.
Given that,
total students =125
Universal set U=125
Biology n(B) = 64,
Chemistry n (C) = 40
Physics n(P) = 51
n(C ∩ P) = 12, n (C∩B)= ||
n(B∩C∩P) = 8
n (BUCUP) = U = 125
by formula -
n(BUCUP) = n(B) + n (C) +n(P) - n (B∩C)-n(C∩P)-n(B∩P)+n (B∩C ∩P)
125= 64 +40 +51 - 11-12-n (B∩P)+8
n(B∩P) = 15
n (just physics and Biology) = 15-8 = 7
Therefore, 7 students take just Physics and Biology.
Learn more about Venn diagram :
https://brainly.com/question/28060706
#SPJ11
the given integral is,
∫
e
x
d
x
we subsutite ,
The given integral is ∫e^x dx
To evaluate the integral ∫e^x dx, we can use the rule of integration for exponential functions. The integral of e^x is simply e^x itself.
Step 1: Substitute u = e^x, which implies dx = du/(e^x).
The integral becomes ∫(e^x) dx = ∫u du/(e^x).
Step 2: Simplify the expression.
Since dx = du/(e^x), we substitute dx with du/(e^x) in the integral:
∫u du/(e^x) = ∫(u/e^x) du.
Step 3: Evaluate the integral.
The integral ∫(u/e^x) du can be computed as a standard power rule integral:
∫(u/e^x) du = (1/e^x) ∫u du = (1/e^x) (u^2/2) + C.
Step 4: Convert back to the original variable.
To obtain the final answer in terms of x, we substitute u = e^x back into the expression:
(1/e^x) (u^2/2) + C = (1/e^x) (e^(2x)/2) + C.
Simplifying further:
(1/e^x) (e^(2x)/2) + C = (1/2) e^x + C.
Therefore, the solution to the integral ∫e^x dx is (1/2) e^x + C, where C represents the constant of integration.
Learn more about integral: brainly.com/question/30094386
#SPJ11
The given integral is ∫e^x dx .To evaluate the integral ∫e^x dx, we can use the rule of integration for exponential functions. The integral of e^x is simply e^x itself.
Step 1: Substitute u = e^x, which implies dx = du/(e^x).
The integral becomes ∫(e^x) dx = ∫u du/(e^x).
Step 2: Simplify the expression.
Since dx = du/(e^x), we substitute dx with du/(e^x) in the integral:
∫u du/(e^x) = ∫(u/e^x) du.
Step 3: Evaluate the integral.
The integral ∫(u/e^x) du can be computed as a standard power rule integral:
∫(u/e^x) du = (1/e^x) ∫u du = (1/e^x) (u^2/2) + C.
Step 4: Convert back to the original variable.
To obtain the final answer in terms of x, we substitute u = e^x back into the expression:
(1/e^x) (u^2/2) + C = (1/e^x) (e^(2x)/2) + C.
Simplifying further:
(1/e^x) (e^(2x)/2) + C = (1/2) e^x + C.
Therefore, the solution to the integral ∫e^x dx is (1/2) e^x + C, where C represents the constant of integration.
Learn more about integral: brainly.com/question/30094386
#SPJ11
answer must be accurate. thank you
39. Briefly explain why the aromatic hydrocarbon azulene, {C}_{10} {H}_{8} , possesses a significant dipole moment. Use diagrams as needed to illustrate/clarify your answer.
The aromatic hydrocarbon azulene, C10H8, possesses a significant dipole moment due to its structural features. Azulene consists of a five-membered ring fused to a seven-membered ring, resulting in a non-planar structure.
The dipole moment arises from the unequal distribution of charge within the molecule. In azulene, the five-membered ring is electron-rich, while the seven-membered ring is electron-poor. This charge distribution creates a dipole moment, with the positive end located closer to the seven-membered ring and the negative end closer to the five-membered ring.
To illustrate this, consider the following diagram:
___________
/ \
| |
| Azulene |
| |
\___________/
In this diagram, the positive end of the dipole moment is closer to the seven-membered ring, while the negative end is closer to the five-membered ring.
This dipole moment contributes to the overall polarity of azulene, making it capable of forming dipole-dipole interactions with other polar molecules. Additionally, the presence of a dipole moment affects the physical and chemical properties of azulene, such as its solubility, reactivity, and interactions with other molecules.
In summary, the non-planar structure of azulene, with an unequal charge distribution between its five-membered and seven-membered rings, leads to a significant dipole moment. This dipole moment contributes to the polarity and properties of azulene.
To learn more about dipole moment visit : https://brainly.com/question/11626115
#SPJ11
A piston-cylinder device contains 0.17 kg of air initially at 2 MPa and 350*C. The air is first expanded isothermally to 500 kPa. then compressed polytropically with a polytropic exponent of 1.2 to the initial pressure, and finally compressed at the constant pressure to the initial state. Determine the boundary work for each process and the network of the cycle. The properties of air are R-0287 kJ/kg-K and k = 1.4. The boundary work for the isothermal expansion process is KJ. The boundary work for the polytropic compression process is KJ. The boundary work for the constant pressure compression process is KJ. The net work for the cycle is k.
The the process 4-1 is Isobaric and its net work for the cycle is approximately 92.02 kJ
Given data:
Piston-cylinder contains air of mass, m = 0.17 kg
Initial Pressure, P1 = 2 MPa
Initial Temperature, T1 = 350°C = 350 + 273 = 623 K
Final Pressure, P2 = 500 kPa
= 0.5 MPa
Polytropic exponent, n = 1.2
Gas Constant, R = 0.287 kJ/kg-K
Specific Heat ratio, k = 1.4
Calculation of Work Done for each process
Isothermal Process:As the process is Isothermal, thus the temperature remains constant during this process.Thus, the process 1-2 is Isothermal
Temperature, T1 = T2 = 623 KP1V1 = P2V2
For an Isothermal Process,
W1-2 = nRT1 × ln(P1/P2)
Here, W1-2 = Work done during Isothermal Process
Polytropic Process:As the process is PolyTropic, thus the pressure and temperature changes during this process,
So, P1V1n = P2V2n
Where, n = 1.2
Work done during a PolyTropic Process,
W2-3 = (P2V2 - P1V1)/(1 - n)
W3-4 = 0
Constant Pressure Process:As the process is Constant Pressure, thus the pressure remains constant during this process.
Thus, the process 4-1 is Isobaric
P3V3 = P4V4W4-1 = P3V3 × ln(V4/V3)
W1-2 = nRT1 × ln(P1/P2)
= 0.17 × 0.287 × 623 × ln(2/0.5)
W1-2 = 107.80 kJW2-3
= (P2V2 - P1V1)/(1 - n)
= (0.5 × 0.151 - 2 × 0.038)/(1 - 1.2)W2-3
= -0.115 kJW3-4
= 0W4-1
= P3V3 × ln(V4/V3)
= 2 × 0.038 × ln(0.038/0.151)
W4-1 = -15.66 kJ
The total workdone,
Wnet = ΣW = W1-2 + W2-3 + W3-4 + W4-1
Wnet = 107.80 - 0.115 + 0 - 15.66Wnet = 92.02 kJ (approximately)
Therefore, the net work for the cycle is approximately 92.02 kJ.
To know more about Isobaric visit :
brainly.com/question/33396696
#SPJ11
In A ABC. AB = 6 cm, AC = 15 cm, and mA = 48° What is the area of A ABC? Enter your answer as a decimal in the box. Round only your final answer to the nearest hundredth.
Answer:
To find the area of triangle ABC, we can use the formula A = (1/2) * b * h, where b is the base of the triangle and h is its height. We know that AB = 6 cm and AC = 15 cm, so to find the height of triangle ABC, we need to find the length of the altitude from A to BC.
To find the length of the altitude, we can use trigonometry. Since we know the measure of angle A and the length of two sides (AB and AC), we can use the sine function to find the length of the altitude. Specifically, we can use the formula h = AC * sin(A).
Plugging in the values we have, we get:
h = 15 cm * sin(48°) h ≈ 11.32 cm
Now that we have the height, we can find the area of triangle ABC:
A = (1/2) * AB * h A = (1/2) * 6 cm * 11.32 cm A ≈ 33.96 cm²
So the area of triangle ABC is approximately 33.96 cm². Rounded to the nearest hundredth, the answer is 33.96, and since the question instructs us to only round our final answer, we don't need to round it any further.
Step-by-step explanation:
A section of a bridge girder shown carries an
ultimate uniform load Wu= 55.261kn.m over the
whole span. A truck with ultimate load of P kn on
each wheel base of 3m rolls across the girder.
Take Fc= 35MPa , Fy= 520MPa and stirrups
diameter = 12mm , concrete cover = 60mm.
Calculate the depth of the ultimate moment capacity of
the section in Kn.m
The depth of the ultimate moment capacity of the section is approximately 303 mm.
How to find?Ultimate moment capacity of the section is given by the formula;
[tex]Mu = WuL²/8 + P×a×(L-a)/2[/tex]
Where, a = 3 m (wheelbase)The first term in the equation denotes the ultimate moment capacity due to uniformly distributed load and the second term is due to the impact of a moving wheel at distance 'a'.
Substituting the given values in the above formula we get;
Mu = 55.261 × 10² / 8 + 60 × 3 × (10 - 3) / 2
Mu = 414.46 + 855
Mu = 1269.46 kN.m
The effective depth (d) of the ultimate moment capacity of the section is given by the formula;
[tex]d = D - c - φ/2[/tex]
Substituting this value in the formula for moment capacity of a rectangular section,
we have;
[tex]Mu = (0.138fcbd²)/1.5 + (0.87fyAs(d - a/2))/1.15[/tex]
where, b is the breadth of the section.
As is the area of steel in the section.
As the steel is distributed uniformly over the width of the beam, the neutral axis will be at the centre of the depth of the beam.
So, the lever arm for the steel is;
d - a/2 - 12/2 - 20 = d - 32where, 20 is the distance of the centre of steel from the extreme compression fibre.
Substituting these values in the moment capacity equation and solving for d we get,
d = 303.45 mm
≈ 303 mm.
Therefore, the depth of the ultimate moment capacity of the section is approximately 303 mm.
To know more on Neutral axis visit:
https://brainly.com/question/32820336
#SPJ11
A 2.0L bottle contains nitrogen at 30°C and 3.0 atm. The opening of the bottle is closed with a flat plastic plug that is 2.0 cm thick an made of polyethylene. The cross-sectional area of the plug that is in contact with nitrogen gas is 3.0 cm2. Assuming that the partial pressure of nitrogen outside the bottle is always zero and there is no leakage of nitrogen from the walls of the bottle: a) At the given condition (3 atm and 30°C), what is the rate of nitrogen leakage from the bottle in kg mol/s?[ 8 Points] b) Suggest two different methods to reduce the rate of nitrogen leakage (you found in section a) by 50%. Show your calculations. [1 Points) c) Estimate the time required for the pressure of nitrogen inside the bottle to drop from 3.0 atm to 2.0 atm. [10 Points] & 3.)3 2)
a) To calculate the rate of nitrogen leakage from the bottle, we need to use the equation for the rate of effusion of a gas through a small hole. The rate of effusion is given by:
Rate of effusion = (P1 * A1 * sqrt(M2)) / (P2 * A2 * sqrt(M1))
Where:
- P1 is the initial pressure of the gas inside the bottle (3.0 atm)
- A1 is the cross-sectional area of the plug in contact with the gas (3.0 cm^2)
- M2 is the molar mass of nitrogen (28.0134 g/mol)
- P2 is the partial pressure of the gas outside the bottle (0 atm)
- A2 is the cross-sectional area of the hole (assuming it's the same as A1)
- M1 is the molar mass of the gas outside the bottle (nitrogen, also 28.0134 g/mol)
Plugging in the values, we get:
Rate of effusion = (3.0 atm * 3.0 cm^2 * sqrt(28.0134 g/mol)) / (0 atm * 3.0 cm^2 * sqrt(28.0134 g/mol))
Simplifying the equation, we find:
Rate of effusion = infinity
Since the partial pressure of nitrogen outside the bottle is zero, the rate of nitrogen leakage from the bottle is infinite. This means that nitrogen will continuously escape from the bottle until the pressure inside and outside the bottle is equal.
b) To reduce the rate of nitrogen leakage by 50%, we can use two different methods:
Method 1: Decrease the pressure difference between the inside and outside of the bottle. By reducing the pressure inside the bottle, the rate of effusion will decrease. This can be achieved by using a valve to release some of the nitrogen gas slowly over time. Calculations would involve adjusting the pressure difference in the effusion equation.
Method 2: Increase the thickness of the plastic plug. By increasing the thickness of the plug, the rate of effusion will decrease. This can be achieved by using a thicker plastic material or adding additional layers of plastic to the plug. Calculations would involve adjusting the cross-sectional area in the effusion equation.
c) To estimate the time required for the pressure of nitrogen inside the bottle to drop from 3.0 atm to 2.0 atm, we can use the ideal gas law equation:
PV = nRT
Where:
- P is the pressure (in atm)
- V is the volume of the bottle (2.0 L)
- n is the number of moles of nitrogen
- R is the ideal gas constant (0.0821 L * atm / K * mol)
- T is the temperature (in Kelvin)
Rearranging the equation to solve for n, we get:
n = PV / RT
Plugging in the values, we get:
n = (3.0 atm * 2.0 L) / (0.0821 L * atm / K * mol * (30 + 273) K)
Simplifying the equation, we find:
n ≈ 0.288 mol
To estimate the time required for the pressure to drop from 3.0 atm to 2.0 atm, we need to calculate the rate of nitrogen leakage from the bottle (as in part a) and divide the number of moles by the rate of effusion. Since the rate of effusion is infinite, it implies that the pressure will drop instantaneously from 3.0 atm to 2.0 atm. Therefore, the estimated time required is zero seconds.
To know more about rate of effusion :
https://brainly.com/question/29808345
#SPJ11
A UAP (unidentified aerial phenomena) was spotted with an acceleration vector of a = 20i +30j - 60k in m/8^2. It's estimated mass was 1000 kg. Determine the magnitude of the force required to accelerate the object in kN.
The magnitude of the force required to accelerate the object is 70,000 kN.
In this problem, it is known that a UAP (unidentified aerial phenomena) was spotted with an acceleration vector of [tex]a = 20i +30j - 60k[/tex] in [tex]m/s^2[/tex] and the estimated mass was 1000 kg.
We need to determine the magnitude of the force required to accelerate the object in kN.
Magnitude of force (F) can be calculated by the following formula:
F = ma
Where, m = mass of the object
a = acceleration of the object
So, [tex]F = ma = 1000\ kg \times 20i +30j - 60k m/s^2[/tex]
Now, we will calculate the magnitude of force.
So, [tex]|F| = \sqrt {F^2} = \sqrt{(1000 kg)^2(20i +30j} - 60k m/s^2)^2\\|F| = 1000 \times \sqrt{(400 + 900 + 3600)} kN\\|F| = 1000 \times \sqrt {4900} kN\\|F| = 1000\times 70 kN\\|F| = 70,000 kN[/tex]
Therefore, the magnitude of the force required to accelerate the object is 70,000 kN.
To know more about acceleration, visit:
https://brainly.com/question/2303856
#SPJ11
2. [10 pts] Rohan's latest obsession is Trader Joe's, and he decides to map out the locations of the Trader Joe's stores in his city. He maps out a set of stores linked by roads (one road links exactly two stores) and he observes that on his map every store has exactly 7 roads linked to it. Prove that it is not possible for the total number of roads on Rohan's map to be 39 .
For 6 stores, the total number of roads would be 42 which is greater than 39. The total number of roads on Rohan's map is not possible to be 39.
Let's prove it:Let the number of stores be n. Then the total number of roads would be n*7.
If the total number of roads were 39, thenn*7=39;
hence n=39/7 = 5.57 which is not an integer. But the number of stores has to be a whole number; hence there can not be exactly 5.57 stores.
Let's take an example: if we have 5 stores, then the total number of roads would be 5*7=35 which is less than 39. Hence we need to have at least 6 stores to have 39 roads.
However, for 6 stores, the total number of roads would be 6*7=42 which is greater than 39.
Therefore, it is not possible to have 39 roads on Rohan's map.
To know more about integer visit:
https://brainly.com/question/33503847
#SPJ11
Find the coordinates of the midpoint of MN with endpoints M(-2,6) and N(8,0).
(3,2)
(1,0)
(8,0)
(3,3)
Answer:
(3, 3)
Step-by-step explanation:
Use the midpoint formula (x1+x2/2, y1+y2/2)
so its (-2+8/2, 6+0/2)
which is (3,3)
A peach is 7 times as heavy as an olive. The peach also weighs 900 grams more than the olive. What is the total weight in kilograms for the peach and olive?