Answer:
The value is [tex]v = 92.68 \ cm/s[/tex]
Explanation:
From the question we are told that
The distance traveled is [tex]d = 190 \ cm = 1.9 \ m[/tex]
The time taken is [tex]t = 4.10 \ s[/tex]
Generally from kinematic equation we have that
[tex]s = ut + \frac{1}{2} at^2[/tex]
Here u is the initial velocity of the marble and the value is [tex]u = 0 \ m/s[/tex]
So
[tex]1.90 = 0* t + \frac{1}{2} a (4.10 )^2[/tex]
=> [tex]1.90 = 0* t + \frac{1}{2} a (4.10 )^2[/tex]
=> [tex]a = 0.226 \ m/s^2[/tex]
Generally from kinematic equations we have that
[tex]v = u + at[/tex]
=> [tex]v = 0 +0.226 * 4.10[/tex]
=> [tex]v =0.9268 \ m/s[/tex]
Converting to cm/s
=> [tex]v =0.9268 * 100[/tex]
=> [tex]v = 92.68 \ cm/s[/tex]
m=20kg F=10N d=25m
Work done=?
w=f×d
w=10N×25m
w=250Nm
A hose on the ground projects a water current upwards at an angle 40 to the horizontal at velocity 20 m/s find height at which water hits a wall at 8 m away from the hose (consider that acceleration due to gravity =9.8 m/s2)
Answer:
The water hits the wall at a height of 5.38 m
Explanation:
Projectile Motion
It's the type of motion that experiences an object projected near the Earth's surface and moves along a curved path exclusively under the action of gravity.
The object describes a parabolic path given by the equation:
[tex]{\displaystyle y=\tan(\theta )\cdot x-{\frac {g}{2v_{0}^{2}\cos ^{2}\theta }}\cdot x^{2}}[/tex]
Where:
y = vertical displacement
x = horizontal displacement
θ = Elevation angle
vo = Initial speed
The hose projects a water current upwards at an angle of θ=40° at a speed vo=20 m/s.
The height at which the water hits a wall located at x=8 m from the hose is:
[tex]{\displaystyle y=\tan40^\circ\cdot 8-{\frac {9.8}{2*20^{2}\cos ^{2}40^\circ }}\cdot 8^{2}}[/tex]
Calculating:
y = 5.38 m
The water hits the wall at a height of 5.38 m
What is a force that opposes motion between two surfaces that are in contact?
Answer:
Friction is a force that opposes motion.
what must be true if a waves wavelength is short ?
Answer: So, if the wavelength of a light wave is shorter, that means that the frequency will be higher because one cycle can pass in a shorter amount of time. ... That means that longer wavelengths have a lower frequency. Conclusion: a longer wavelength means a lower frequency, and a shorter wavelength means a higher frequency!
If the wavelength of a wave is short. It is true that the wave will have a lower frequency. A longer wavelength denotes a lower frequency.
What is a wave?A wave is a phenomenon that flows across a material medium without leaving any lasting mark.
Frequency is defined as the number of cycles per second. The time to make one complete cycle is the frequency and the distance between successive crests of a wave is the wavelength.
Thus, a shorter wavelength of a light wave signifies a greater frequency since one cycle may pass in a shorter amount of time. Longer wavelengths have a lower frequency.
Hence a longer wavelength denotes a lower frequency, whereas a shorter wavelength denotes a higher frequency.
To learn more about the wave refer to the link;
brainly.com/question/3004869
How will Artificial Intelligence change the way we do things? .......C-Claim: 2 points
Write a statement that responds to the question.*
Your answer
Answer:
Well it'll change our way of knowledge and more than likely, labor type of jobs that need people will no longer need them, as they don't get hurt, you don't have to pay them or anything like a human being. We'll probably have school online, our shopping online. It'll be a both good and bad thing for us.
Explanation:
Use the axes below to graph the skydiver's velocity. Remember that a negative velocity should be graphed below the X-axis. Be sure to include numerical and word labels, with units, for both axes.
Answer: This is the graph we are supposed to fill out.
Explanation:
The diagram shows a model of an atom. Who first proposed this model?
A. Bohr
B. Thomson
C. Rutherford
ОО
D. Dalton
A.Bohr
His model postulated the existence of energy levels or shells of electrons. Electrons could only be found in these specific energy levels; in other words, their energy was quantised, and couldn’t take just any value. Electrons could move between these energy levels but had to do so by either absorbing or emitting energy.
A. Bohr!
This answer is correct because I read the information.
which internal energy source produces heat by converting gravitational potential energy into thermal energy
which is the best evidence that continents that are now separated were once
joined?
A. continents that were once joined now have similar climates
B. identical plant and animal fossils are found on continents that are now separated
C. the cultures of the people on separated continents have similar languages
D. the migratory patterns of wildlife on separated continents are similar
An engine pumps up 1,000kg of water through a height of 10m in 5s. Calculate the power of the engine
in kilowatt. Take g=10m s-1
plz answer I will m ake u brainliest and follow u
Answer:
20Kilowatt
Explanation:
Power is the rate of work done per time. It can be calculated using the formula:
Power = Energy/time
Energy = mass × acceleration due to gravity × height ÷ time
Power = mgh/t
Where;
m = mass (1000kg)
g = acceleration due to gravity (10m/s²)
h = height (10m)
t = time (s)
Power = 1000 × 10 × 10 ÷ 5
Power = 20000 watt
In kilowatt = 1000watt, the power is:
20Kilowatt or 20Kw
Please help me I swear will mark you brainiest
Answer:
B
Explanation:
I hope this helps!!! <3
Answer:
B.......
Explanation:
Hope this helped
1. what is the term used for the movement of air from sea to land
2.Is it true that air blows from low pressure to high pressure zone. Explain
3.What is the ore of gold silicon
Answer:
1.Sea breeze
2. False
3.
a)Gold nugget
b)Silica sand
Explanation:
1.
The movement of air / wind blowing from the sea to the land is called sea breeze. This occurs due to high temperature differences between the water body and the land. The land is at its maximum heating, causing low pressure zones. High pressure zones in the adjacent water body causes the air to from from the sea to the land to occupy the zones of low pressures created.
2.
Air blows from areas with high pressures to those with low pressures. When an area experiences high temperatures, it causes the environment to have low pressure, creating voids , which are empty spaces that require to be filled. Additionally, the high temperatures heat the air around to cause it to rise creating the voids. Due to low pressure created, air from high pressure zones move in to occupy these zones. Hence air flows from areas with high air pressures to those with low pressures.
3.The ore for Gold is Gold nugget where as that for silicon is silica sand.
BOTH plant and animal cells contain...
i need a answer now it's due today please help
Answer:
I searched it up:
Explanation:
"Structurally, plant and animal cells are very similar because they are both eukaryotic cells. They both contain membrane-bound organelles such as the nucleus, mitochondria, endoplasmic reticulum, Golgi apparatus, lysosomes, and peroxisomes. Both also contain similar membranes, cytosol, and cytoskeletal elements"
Hope this helps ∞<3
Physical values in the real world have two components: magnitude and
Answer:
Dimension.
Explanation:
When two ocean plates come together, one ocean plate __________________
under the other, causing a chain of ________________ __________________
to form.
Answer:
A subduction zone is also generated when two oceanic plates collide — the older plate is forced under the younger one — and it leads to the formation of chains of volcanic islands known as island arcs.
Explanation:
Speed, Velocity, and Acceleration Escape Room.
Enter the correct 4 digit code (no spaces
Answer:1342
Explanation:
How does hydraulic equipment work?
Answer:
Hydraulic systems work by using pressurized fluid to power an engine. These hydraulic presses put pressure on a small amount of fluid in order to generate a large amount of power. That pressure forces it against a piston on the other side of the container.
an object weighs 150N on earth. what is the mass of the object?
Answer:
450 g =0.9921 lb
Explanation:
Laura is a star runner of the school's track team. During a trial, her speed was measured to be 9.80 m/s. If Laura's mass is 45.2 kg, her kinetic
energy during the trial was
Answer:
KE = 2.17 E3 J
Explanation:
m = 45.2 kg
v = 9.8 m/s
KE = 1/2mv^2
KE = [(45.2 kg)(9.8m/s)^2]/2
KE = 2.17 E3 J
You go to the store and buy 3 apples. Each apple has a mass of 4.66 grams. What is the total mass of apples you bought.
Remember the difference between a counted and a measured number.
NEEP HELP!
Taking Finals
its 13.98. it's simple multiplication 3* 4.66= 13.98
1. A man is running on the straight road with the uniform velocity
3 m/s. Calculate acceleration produced by him.
what is it that makes a magnet different from a piece of iron that is not mangetic?
Answer:
Under normal conditions, a magnetic material like iron doesn't behave like a magnet because the domains don't have a preferred direction of alignment. On the other hand, the domains of a magnet (or a magnetized iron) are all aligned in s specific direction.
Draw a picture showing the possible phases of the moon in this binary star
system, do they look the same or different from those we see in the sky in
reality? (You might want to think about scale and how far the suns would be
when considering your answer.)
(Help ASAP)
A hollow tennis ball and a solid steel ball of the same diameter are dropped at the same time. Which ball has the greater force acting on it
Answer:
the solid steel ball...more mass more weight more gravity
Explanation:
Answer:
Solid steel ball. It has more mass therefore more force will be acting on it.
Explanation:
4 pleasee i have to submit in 10 minutes
Answer:
True
Explanation:
A pressure sensor inside of a mixing tank is designed to turn red when the pressure inside the tank exceeds 1.9 kPa. If the sensor is a square, 10 cm on each side, how great a force must be exerted on the sensor in order for it to turn red?
Answer:
19 N
Explanation:
From the question given above, the following data were obtained:
Pressure (P) = 1.9 kPa
Length (L) = 10 cm
Force (F) =?
Next, we shall convert 1.9 KPa to N/m². This can be obtained as follow:
1 KPa = 1000 N/m²
Therefore,
1.9 KPa = 1.9 KPa × 1000 N/m² / 1 KPa
1.9 KPa = 1900 N/m²
Thus, 1.9 KPa is equivalent to 1900 N/m².
Next, we shall convert 10 cm to m. This can be obtained as follow:
100 cm = 1 m
Therefore,
10 cm = 10 cm × 1 m / 100 cm
10 cm = 0.1 m
Thus, 10 cm is equivalent to 0.1 m
Next, we shall determine the area of the square. This can be obtained as follow:
Length (L) = 0.1 m
Area of square (A) =?
A = L²
A = 0.1²
A = 0.01 m²
Thus, the area of the square is 0.01 m².
Finally, we shall determine the force that must be exerted on the sensor in order for it to turn red. This can be obtained as follow:
Pressure (P) = 1900 N/m²
Area (A) = 0.01 m²
Force (F) =?
P = F/A
1900 = F / 0.01
Cross multiply
F = 1900 × 0.01
F = 19 N
Therefore, a force of 19 N must be exerted on the sensor in order for it to turn red.
what angle is formed by the sun, earth, and moon during an eclipse?
A.180 degree
B.270 degree
C.90 degree
D.45 degree
obtain the temp. at which the reading of Fahrenheit is double of that in Celsius scale.
Answer:
320 degrees fahrenheit and 160 degrees celcius
Explanation:
there's a formula that i definately don't remember but it exists
What is the tangential velocity of a record player which makes 11 revolutions in 20 seconds?
Velocity is defined as rate of change of displacement wit respect to time.
tangential velocity is (11/10)πr , where r is radius of circular track.
Since, tangential velocity is, [tex]=\frac{distance}{time}[/tex]
In one revolution, distance travelled is circumference of circular track.
If radius of circular track is r , then distance travelled in one revolution is, = 2πr
So, 11 revolutions = 11(2πr) = 22πr
Time taken = 20 second
So, tangential velocity = 22πr/20 = (11/10)πr meter per second.
Learn more:
https://brainly.com/question/14401457
A basketball player jumps straight upward. After 0,625 s, she is 0.441 m above the ground. What is her initial velocity?????????
Answer:
v₀ = 3.77 [m/s]
Explanation:
This problem can be solved in a simple way by means of the following equation of kinematics.
[tex]y=y_{o}+v_{o}*t+\frac{1}{2}*g*t^{2}[/tex]
where:
y - yo = 0.441 [m]
Vo = initial velocity [m/s]
g = gravity acceleration = 9.81 [m/s²]
t = time = 0.625 [s]
[tex]0.441 = v_{o}*(0.625)-\frac{1}{2} *9.81*(0.625)^{2} \\2.357 = v_{o}*0.625\\v_{o}=3.77[m/s][/tex]
Note: The sign of the acceleration is negative since the movement of the basketball player is against of the gravity acceleration.