The force acting on the stone is the force it exerts on the bucket. Therefore, option (b) is 16 is the correct answer to the first question. Therefore, option (e) 39J is the correct answer to the second question.
The magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 40 N.
Work done by an external force to lift a 2.00 kg block up 2.00 m is 39 J.
According to the problem, A stone of mass 40 kg sits at the bottom of a bucket, and a string of length 1.0 m is attached to the bucket and the whole thing is made to move in circles with the speed of 4.5 m/s.
So, the centripetal force acting on the stone can be calculated by the formula F = mv2/r
where m is the mass of the stone, v is the speed of the bucket, and r is the length of the string.
We know that m = 40 kg, v = 4.5 m/s, and r = 1 m.So, F = 40 x 4.52/1= 810 N
Now, the force acting on the stone is the force it exerts on the bucket. Therefore, the magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 810 N or 40 N (approximately).Therefore, option (b) is the correct answer to the first question.
Work done by an external force to lift a 2.00 kg block up 2.00 m can be calculated using the formulaW = mghwhere m is the mass of the block, g is the acceleration due to gravity, and h is the height through which the block is lifted.
We know that m = 2.00 kg, g = 9.81 m/s2, and h = 2.00 m.So, W = 2.00 x 9.81 x 2.00= 39.24 J or 39 J (approximately).
Therefore, option (e) is the correct answer to the second question.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
A scuba tank, when fully submerged, displaces 14.1 L of seawater. The tank itself has a mass of 13.5 kg and, when "full," contains 1.25 kg of air. Assuming only a weight and buoyant force act, determine the net force (magnitude) on the fully submerged tank at the beginning of a dive (when it is full of air). Express your answer with the appropriate units. X Incorrect; Try Again; 2 attempts remaining Express your answer with the appropriate units.
The net force on the tank is 10.13 Newtons (N). So, the coorect anser is 10.13 N.
To determine the net force, we need to consider the weight of the tank and the buoyant force acting on it.
1. Weight of the tank:
Weight = mass * acceleration due to gravity
Weight = 13.5 kg * 9.8 m/s^2
The weight of the tank is approximately 132.3 N.
2. Buoyant force:
Buoyant force = density of fluid * volume displaced * acceleration due to gravity
First, let's convert the volume of seawater displaced by the tank to cubic meters:
Volume = 14.1 L * 0.001 m^3/L
The volume is approximately 0.0141 m^3.
Now, let's calculate the buoyant force using the density of seawater, which is approximately 1025 kg/m^3:
Buoyant force = 1025 kg/m^3 * 0.0141 m^3 * 9.8 m/s^2
The buoyant force is approximately 142.43 N.
3. Net force:
Net force = Buoyant force - Weight
Net force = 142.43 N - 132.3 N
The net force on the fully submerged scuba tank at the beginning of a dive is approximately 10.13 N.
Therefore, the net force on the tank is 10.13 Newtons (N).
Learn more about buoyant force
https://brainly.com/question/21990136
#SPJ11
In the circuit shown above, all initial conditions are zero. A DC voltage source vin=12V is applied to the circuit at time t=0 as a step input. (a) Let R=3Ω in the circuit shown above. Find the voltage across the capacitor vC(t) using time-domain methods. (b) What type of a step response does the circuit show for the component values in part (a)? Explain your reasoning with a single sentence. (c) What should be the value of the resistor R in the circuit in order for the circuit to show a critically damped response to the step input given in part (a)?
(a) The voltage across the capacitor vC(t) in the circuit can be found using time-domain methods by applying the principles of circuit analysis and solving the differential equation that governs the behavior of the circuit.
(b) The circuit in part (a) exhibits an overdamped step response, characterized by a slow, gradual rise and settling of the voltage across the capacitor.
(c) To achieve a critically damped response in the circuit for the step input given in part (a), the value of the resistor R needs to be adjusted accordingly.
(a) To find the voltage across the capacitor vC(t), we can analyze the circuit using time-domain methods. Since all initial conditions are zero and a step input is applied, we can apply Kirchhoff's laws and solve the differential equation that describes the circuit's behavior. By solving the equation, we can obtain the time-domain expression for vC(t).
(b) The type of step response exhibited by the circuit in part (a) is overdamped. This is because the circuit parameters, including the resistance R and the capacitance C, are such that the circuit's response is characterized by a slow, gradual rise and settling of the voltage across the capacitor. There are no oscillations or overshoots in the response.
(c) To achieve a critically damped response in the circuit for the given step input, the value of the resistor R needs to be adjusted. The critically damped response occurs when the circuit's response quickly reaches the steady state without any oscillations or overshoot. To achieve this, the resistance R needs to be set to a specific value based on the values of other circuit components such as the capacitance C. The specific value of R can be calculated using the circuit's time constant and damping ratio.
To know more about capacitor click here:
https://brainly.com/question/31627158
#SPJ11
A bullet is dropped from the top of the Empire State Building while another bullet is fired downward from the same location. Neglecting air resistance, the acceleration of a. none of these b. it depends on the mass of the bullets c. the fired bullet is greater. Od, each bullet is 9.8 meters per second per second. e. the dropped bullet is greater.
The acceleration of both bullets, neglecting air resistance, would be the same.
Hence, the correct answer is:
a. None of these (the acceleration is the same for both bullets)
When a bullet is dropped from the top of the Empire State Building or fired downward from the same location, the only significant force acting on both bullets is gravity.
In the absence of air resistance, the acceleration experienced by any object near the surface of the Earth is constant and equal to approximately 9.8 meters per second squared (m/s²), directed downward.
The mass of the bullets does not affect their acceleration due to gravity. This is known as the equivalence principle, which states that the gravitational acceleration experienced by an object is independent of its mass.
Therefore, regardless of their masses or initial velocities, both bullets would experience the same acceleration of 9.8 m/s² downward.
Hence, the correct answer is:
a. None of these (the acceleration is the same for both bullets)
Learn more about equivalence principle, here
https://brainly.com/question/32296932
#SPJ11
A wheel with a radius of 0.13 m is mounted on a frictionless, horizontal axle that is perpendicular to the wheel and passes through the center of mass of the wheel. The moment of inertia of the wheel about the given axle is 0.013 kg⋅m 2
. A light cord wrapped around the wheel supports a 2.4 kg object. When the object is released from rest with the string taut, calculate the acceleration of the object in the unit of m/s 2
.
The wheel's mass is 2 kg with wheel with a radius of 0.13 m and a moment of inertia of 0.013 kg⋅m² about a frictionless, horizontal axle passing through its center of mass.
The moment of inertia (I) of a rotating object represents its resistance to changes in rotational motion. For a solid disk or wheel, the moment of inertia can be calculated using the formula
[tex]I = (1/2) * m * r²,[/tex]
Where m is the mass of the object and r is the radius. In this case, the given moment of inertia (0.013 kg⋅m²) corresponds to the wheel's rotational characteristics. To find the mass of the wheel, we need to rearrange the formula as
[tex]m = (2 * I) / r²[/tex]
. Plugging in the values, we get
[tex]m = (2 * 0.013 kg⋅m²) / (0.13 m)²[/tex]
[tex]= 2 kg[/tex]
To know more about moment of inertia
brainly.com/question/30051108
#SPJ11
Q4. A 5 kg bowling ball is placed at the top of a ramp 6 metres high. Starting at rest, it rolls down to the base of the ramp reaching a final linear speed of 10 m/s. a) Calculate the moment of inertia for the bowling ball, modelling it as a solid sphere with diameter of 12 cm. (2) b) By considering the conservation of energy during the ball's travel, find the rotational speed of the ball when it reaches the bottom of the ramp. Give your answer in rotations-per-minute (RPM). (5) (7 marks)
a) The moment of inertia for the bowling ball is 0.0144 kg·m².
b) The rotational speed of the ball when it reaches the bottom of the ramp is approximately 1555 RPM.
a) To calculate the moment of inertia for the solid sphere (bowling ball), we can use the formula:
I = (2/5) * m * r^2
where I is the moment of inertia, m is the mass of the sphere, and r is the radius of the sphere.
Given:
Mass of the bowling ball (m) = 5 kg
Diameter of the sphere (d) = 12 cm = 0.12 m
First, we need to calculate the radius (r) of the sphere:
r = d/2 = 0.12 m / 2 = 0.06 m
Now, we can calculate the moment of inertia:
I = (2/5) * 5 kg * (0.06 m)^2
I = (2/5) * 5 kg * 0.0036 m^2
I = 0.0144 kg·m²
b) To find the rotational speed of the ball when it reaches the bottom of the ramp, we can use the conservation of energy principle. The initial potential energy (mgh) of the ball at the top of the ramp is converted into both kinetic energy (1/2 mv^2) and rotational kinetic energy (1/2 I ω²) at the bottom of the ramp.
Given:
Height of the ramp (h) = 6 m
Final linear speed of the ball (v) = 10 m/s
Moment of inertia of the ball (I) = 0.0144 kg·m²
Using the conservation of energy equation:
mgh = (1/2)mv^2 + (1/2)I ω²
Since the ball starts from rest, the initial rotational speed (ω) is 0.
mgh = (1/2)mv^2 + (1/2)I ω²
mgh = (1/2)mv^2
6 m * 9.8 m/s² = (1/2) * 5 kg * (10 m/s)² + (1/2) * 0.0144 kg·m² * ω²
Simplifying the equation:
58.8 J = 250 J + 0.0072 kg·m² * ω²
0.0072 kg·m² * ω² = 58.8 J - 250 J
0.0072 kg·m² * ω² = -191.2 J
Since the rotational speed (ω) is in rotations per minute (RPM), we need to convert the energy units to Joules:
1 RPM = (2π/60) rad/s
1 J = 1 kg·m²/s²
Converting the units:
0.0072 kg·m² * ω² = -191.2 J
ω² = -191.2 J / 0.0072 kg·m²
ω² ≈ -26555.56 rad²/s²
Taking the square root of both sides:
ω ≈ ± √(-26555.56 rad²/s²)
ω ≈ ± 162.9 rad/s
Since the speed is positive and the ball is rolling in a particular direction, we take the positive value:
ω ≈ 162.9 rad/s
Now, we can convert the rotational speed to RPM:
1 RPM = (2π/60) rad/s
ω_RPM = (ω * 60) / (2π)
ω_RPM = (162.9 * 60) / (2π)
ω_RPM ≈ 1555 RPM
To know more aout moment of inertia
https://brainly.com/question/30051108
#SPJ11
a) What is the cost of heating a hot tub containing 1475 kg of water from 10°C to 39°C, assuming 75 % efficiency to account for heat transfer to the surroundings? The cost of electricity is 9 cents/kWh. $ _________
b) What current was used by the 230 V AC electric heater, if this took 5 h?
the cost of heating a hot tub is $0.01 and the current used by the 230 V AC electric heater is 0.058 A.
a) Mass of water = 1475 kg
Initial temperature = 10°C
Final temperature = 39°C
Thus, the change in temperature,
ΔT = 39°C - 10°C = 29°C.
The specific heat of water is 4.18 J/g°C.
The amount of heat energy required to increase the temperature of 1 g of water through 1°C is 4.18 J.
Thus, the heat energy required to increase the temperature of 1475 kg of water through 29°C is given by:
Q = m × c × ΔTQ = 1475 × 4.18 × 29Q = 179,972 J
Since the efficiency of the heating system is 75%, the actual amount of energy required will be more than the above-calculated amount. Thus, the actual amount of energy required is given by:
Qactual = Q / η
Qactual = 179,972 / 0.75
Qactual = 239,962.67 J
We need to calculate the cost of heating a hot tub, given the cost of electricity is 9 cents per kWh.
1 kWh = 3,600,000 J
Cost of 1 kWh = $0.09
Thus, the cost of heating a hot tub is:
C = Qactual / 3,600,000 × 0.09C = $0.00526 ≈ $0.01
b) Voltage, V = 230 V
Time, t = 5 h
We know that:
Power, P = V × I
The amount of energy consumed by a device is given by:
E = P × t
Thus, the amount of energy consumed by the heater is given by:
E = P × t
P = E / t
P = 239,962.67 J / (5 × 60 × 60)
P = 13.33 W
P = V × I
V = P / I230 = 13.33 / I
I = P / V
Thus,I = 13.33 / 230I = 0.058 A
Therefore, the current used by the 230 V AC electric heater is 0.058 A.
Learn more about current:
https://brainly.com/question/1100341
#SPJ11
1. Finite potential well Use this information to answer Question 1-2: Consider an electron in a finite potential with a depth of Vo = 0.3 eV and a width of 10 nm. Find the lowest energy level. Give your answer in unit of eV. Answers within 5% error will be considered correct. Note that in the lecture titled "Finite Potential Well", the potential well is defined from -L to L, which makes the well width 2L. Enter answer here 2. Finite potential well Find the second lowest energy level. Give your answer in unit of eV. Answers within 5% error will be considered correct. Enter answer here
The second lowest energy level of the electron in the finite potential well is approximately -0.039 eV. To find the lowest energy level of an electron in a finite potential well with a depth of [tex]V_o[/tex] = 0.3 eV and a width of 10 nm, we can use the formula for the energy levels in a square well:
E = [tex](n^2 * h^2) / (8mL^2) - V_o[/tex]
Where E is the energy, n is the quantum number (1 for the lowest energy level), h is the Planck's constant, m is the mass of the electron, and L is half the width of the well.
First, we need to convert the width of the well to meters. Since the width is given as 10 nm, we have L = 10 nm / 2 = 5 nm = 5 * [tex]10^(-9)[/tex] m.
Next, we substitute the values into the formula:
E = ([tex]1^2 * (6.63 * 10^(-34) J*s)^2) / (8 * (9.11 * 10^(-31) kg) * (5 * 10^(-9) m)^2) - (0.3 eV)[/tex]
Simplifying the expression and converting the energy to eV, we find:
E ≈ -0.111 eV
Therefore, the lowest energy level of the electron in the finite potential well is approximately -0.111 eV.
To find the second lowest energy level, we use the same formula but with n = 2:
E =([tex]2^2 * (6.63 * 10^(-34) J*s)^2) / (8 * (9.11 * 10^(-31) kg) * (5 * 10^(-9) m)^2) - (0.3 eV[/tex])
Simplifying and converting to eV, we find:
E ≈ -0.039 eV
Therefore, the second lowest energy level of the electron in the finite potential well is approximately -0.039 eV.
Learn more about potential here:
https://brainly.com/question/24284560
#SPJ11
A straight wire carries a current of 5 mA and is oriented such that its vector
length is given by L=(3i-4j+5k)m. If the magnetic field is B=(-2i+3j-2k)x10^-3T, obtain
the magnetic force vector produced on the wire.
Justify your answers with equations and arguments
The magnetic force produced by a straight wire carrying a current of 5 m
A is given as follows:The magnetic force vector produced on the wire is:F = IL × BWhere I is the current flowing through the wire, L is the vector length of the wire and
B is the magnetic field acting on the wire.
From the problem statement,I = 5 mA = 5 × 10^-3AL = 3i - 4j + 5kmandB = -2i + 3j - 2k × 10^-3TSubstituting these values in the equation of magnetic force, we get:F = 5 × 10^-3A × (3i - 4j + 5k)m × (-2i + 3j - 2k) × 10^-3T= -1.55 × 10^-5(i + j + 7k) NCoupling between a magnetic field and a current causes a magnetic force to be exerted. The magnetic force acting on the wire is orthogonal to both the current direction and the magnetic field direction. The direction of the magnetic force is determined using the right-hand rule. A quantity of positive charge moving in the direction of the current is affected by a force that is perpendicular to both the velocity of the charge and the direction of the magnetic field.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
Two wires carrying a 3.4-A current in opposite directions are 0.013m apart. What is the force per unit length on each wire?
Answer: x 10⁻⁴N/m
Is the force attractive or repulsive?
Answer:
The force per unit length on each wire is 10⁻⁴ N/m and the force is repulsive.
The current passing through the wires I = 3.4A
Distance between the two wires is d = 0.013m
The force per unit length on each wire is calculated using the formula:
F/L = μ₀I¹I²/2πd
Where,
F/L is the force per unit length
μ₀ is the permeability constant
I¹ and I² are the currents passing through the wires
2πd is the separation between the two wires
Substituting the values in the formula, we get
F/L = (4π x 10⁻⁷ Tm/A) x (3.4A)² / 2π(0.013m)
= 10⁻⁴ N/m
Therefore, the force per unit length on each wire is 10⁻⁴ N/m.
The two wires carrying current in opposite directions repel each other. Therefore, the force is repulsive.
Learn more about the force per unit length:
brainly.com/question/18917488
#SPJ11
Find the power dissipated in each of these extension cords: a) an extension cord having a 0.0575 Ω resistance and through which 4.88 A is flowing. ____________ W b) a cheaper cord utilizing thinner wire and with a resistance of 0.28 Ω. __________W
The power dissipated in the extension cord is 1.13 W and The power dissipated in the cheaper cord is 5.23
1.The power dissipated in each of these extension cords can be found using the formula: P = I²Rwhere:P = power I = current R = resistance
2. For an extension cord having a 0.0575 Ω resistance and through which 4.88 A is flowing, the power dissipated can be calculated using the above formula as: P = (4.88 A)² x 0.0575 ΩP = 1.13 W. Therefore, the power dissipated in the extension cord is 1.13 W.
3. For a cheaper cord utilizing thinner wire and with a resistance of 0.28 Ω, the power dissipated can be calculated using the above formula as: P = (4.88 A)² x 0.28 ΩP = 5.23 W. Therefore, the power dissipated in the cheaper cord is 5.23 W.
Learn more about power:
https://brainly.com/question/13600515
#SPJ11
A long solenoid with n= 35 turns per centimeter and a radius of R= 12 cm carries a current of i= 35 mA. Find the magnetic field in the solenoid. The magnetci field, Bo 176.6 x Units UT If a straight conductor is positioned along the axis of the solenoid and carries a current of 53 A, what is the magnitude of the net magnetic field at the distance R/2 from the axis of the solenoid? The net magnetic field, Bret = 176.61 Units
Answer:
1) The magnetic field inside the solenoid is approximately 0.0389 Tesla.
2) The magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid is approximately 0.0424 Tesla.
To find the magnetic field inside the solenoid, we can use the formula for the magnetic field inside a solenoid:
B = μ₀ * n * i
Where:
B is the magnetic field
μ₀ is the permeability of free space (4π * 10^(-7) T·m/A)
n is the number of turns per unit length
i is the current
n = 35 turns/cm
= 35 * 100 turns/m
= 3500 turns/m
i = 35 mA
= 35 * 10^(-3) A
Substituting the values into the formula:
B = (4π * 10^(-7) T·m/A) * (3500 turns/m) * (35 * 10^(-3) A)
Calculating:
B ≈ 0.0389 T
Therefore, the magnetic field inside the solenoid is approximately 0.0389 Tesla.
To find the magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid due to the solenoid and the straight conductor, we can sum the magnetic fields produced by each separately.
The magnetic field at a distance R/2 from the axis of the solenoid can be found using the formula:
B_sol = μ₀ * n * i
n = 3500 turns/m
i = 35 * 10^(-3) A
Substituting the values into the formula:
B_sol = (4π * 10^(-7) T·m/A) * (3500 turns/m) * (35 * 10^(-3) A)
Calculating:
B_sol ≈ 0.0389 T
The magnetic field at a distance R/2 from a long straight conductor carrying a current can be found using Ampere's law:
B_conductor = (μ₀ * i) / (2π * R/2)
i = 53 A
R = 12 cm = 0.12 m
Substituting the values into the formula:
B_conductor = (4π * 10^(-7) T·m/A * 53 A) / (2π * 0.12 m)
Calculating:
B_conductor ≈ 0.0035 T
To find the net magnetic field, we can add the magnitudes of the magnetic fields produced by the solenoid and the conductor:
B_net = |B_sol| + |B_conductor|
Substituting the values:
B_net = |0.0389 T| + |0.0035 T|
Calculating:
B_net ≈ 0.0424 T
Therefore, the magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid is approximately 0.0424 Tesla.
Learn more about solenoid, here
https://brainly.com/question/1873362
#SPJ11
A very long, straight solenoid with a diameter of 3.00 cm is wound with 40 turns of wire per centimeter, and the windings carry a current of 0.245 A. A second coil having N turns and a larger diameter is slipped over the solenoid so that the two are coaxial. The current in the solenoid is ramped down to zero over a period of 0.60 s. What average emf is induced in the second coil if it has a diameter of 3.3 cm and N=7? Express your answer in microvolts. Part B What is the induced emt if the diameter is 6.6 cm and N=14 ? Express your answer in microvolts
Part A. Answer: 7.65 μV.
Part B. Answer: 2.11 μV.
Part A The average emf induced in the second coil if it has a diameter of 3.3 cm and N=7 is calculated as follows:Formula used:EMF = -N(ΔΦ/Δt)Given:Radius of solenoid, r1 = 3/2 × 10-2 cmRadius of second coil, r2 = 3.3/2 × 10-2 cmNumber of turns on second coil, N = 7Number of turns on solenoid, n = 40 turns/cmCurrent in the solenoid, I = 0.245 ATime period to ramp down the current, t = 0.60 sFirst we need to find the magnetic field B1 due to the solenoid.
The formula for magnetic field due to solenoid is given as:B1 = μ0nIWhere μ0 is the permeability of free space and is equal to 4π × 10-7 T m/A.On substituting the values, we get:B1 = (4π × 10-7) × 40 × 0.245B1 = 1.96 × 10-5 TWe can also write the above value of B1 as:B1 = μ0nIWhere the number of turns per unit length (n) is given as 40 turns/cm.The formula for the magnetic field B2 due to the second coil is given as:B2 = μ0NI/2r2Where N is the number of turns on the second coil, and r2 is the radius of the second coil.
The magnetic flux linked with the second coil is given as:Φ = B2πr2²The change in flux is calculated as:ΔΦ = Φ2 - Φ1Where Φ2 is the final flux and Φ1 is the initial flux.The final flux linked with the second coil Φ2 is given as:B2 = μ0NI/2r2Φ2 = B2πr2²Substituting the given values in the above equation we get:Φ2 = (4π × 10-7) × 7 × 0.245 × (3.3/2 × 10-2)² × πΦ2 = 3.218 × 10-8 WbThe initial flux linked with the second coil Φ1 is given as:B1 = μ0nIΦ1 = B1πr2²Substituting the given values in the above equation we get:Φ1 = (4π × 10-7) × 40 × 0.245 × (3.3/2 × 10-2)² × πΦ1 = 4.077 × 10-8 WbNow, we can calculate the average emf induced in the second coil using the formula mentioned above:EMF = -N(ΔΦ/Δt)EMF = -7((3.218 × 10-8 - 4.077 × 10-8)/(0.60))EMF = 7.65 μVAnswer: 7.65 μV.
Part BWhat is the induced emf if the diameter is 6.6 cm and N=14?The radius of the second coil is given as r2 = 6.6/2 × 10-2 cm.The number of turns on the second coil is given as N = 14.The magnetic flux linked with the second coil is given as:Φ = B2πr2²The change in flux is calculated as:ΔΦ = Φ2 - Φ1Where Φ2 is the final flux and Φ1 is the initial flux.The final flux linked with the second coil Φ2 is given as:B2 = μ0NI/2r2Φ2 = B2πr2².
Substituting the given values in the above equation we get:Φ2 = (4π × 10-7) × 14 × 0.245 × (6.6/2 × 10-2)² × πΦ2 = 2.939 × 10-7 WbThe initial flux linked with the second coil Φ1 is given as:B1 = μ0nIΦ1 = B1πr2²Substituting the given values in the above equation we get:Φ1 = (4π × 10-7) × 40 × 0.245 × (6.6/2 × 10-2)² × πΦ1 = 3.707 × 10-7 WbNow, we can calculate the average emf induced in the second coil using the formula mentioned above:EMF = -N(ΔΦ/Δt)EMF = -14((2.939 × 10-7 - 3.707 × 10-7)/(0.60))EMF = 2.11 μVAnswer: 2.11 μV.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
Four 7.5-kg spheres are located at the corners of a square of side 0.65 m Part A Calculate the magnitude of the gravitational force exerted on one sphere by the other three Calculate the direction of the gravitational force exerted on one sphere by the other three Express your answer to two significant figures and include the appropriate units. 0
The direction of the gravitational force exerted on one sphere by the other three is always towards the center of mass of the other three spheres. Since the spheres are located at the corners of a square, the force vectors will be directed towards the center of the square.
To calculate the magnitude of the gravitational force exerted on one sphere by the other three, we can use the formula for gravitational force:
where F is the gravitational force, G is the gravitational constant (approximately 6.674 × [tex]10^-11 Nm^2/kg^2)[/tex], [tex]m_1[/tex] and [tex]m_2[/tex] are the masses of the two objects, and r is the distance between their centers.
F =[tex]G * (m_1 * m_2) / r^2,[/tex]
In this case, the mass of each sphere is given as 7.5 kg, and the distance between the centers of the spheres is equal to the side length of the square, which is 0.65 m. By substituting these values into the formula, we can calculate the gravitational force exerted on one sphere by the other three.
The direction of the gravitational force exerted on one sphere by the other three is always towards the center of mass of the other three spheres. Since the spheres are located at the corners of a square, the force vectors will be directed towards the center of the square.
To calculate the magnitude of the gravitational force exerted on one sphere by the other three, we use the formula F =[tex]G * (m_1 * m_2) / r^2[/tex]. This formula allows us to determine the gravitational force between two objects based on their masses and the distance between their centers.
In this case, we have four spheres, each with a mass of 7.5 kg. To calculate the force exerted on one sphere by the other three, we treat each sphere as the first object (m1) and the other three spheres as the second object (m2). We then calculate the force for each combination and sum up the magnitudes of the forces.
The distance between the centers of the spheres is given as the side length of the square, which is 0.65 m. This distance is used in the formula to calculate the gravitational force.
The direction of the gravitational force exerted on one sphere by the other three is always towards the center of mass of the other three spheres. Since the spheres are located at the corners of a square, the force vectors will be directed towards the center of the square. This means that the gravitational force vectors will point towards the center of the square, regardless of the specific positions of the spheres.
Learn more about gravitation here:
https://brainly.com/question/3009841
#SPJ11
Suppose that a parallel-plate capacitor has circular plates with radius R = 29 mm and a plate separation of 5.3 mm. Suppose also that a sinusoidal potential difference with a maximum value of 210 V and a frequency of 80 Hz is applied across the plates; that is, V = (210 V) sin[21(80 Hz)t]. Find Bmax(R), the maximum value of the induced magnetic field that occurs at r=R.
The maximum value of the induced magnetic field (Bmax) at r = R is approximately 0.0781 Tesla (T).
To find the maximum value of the induced magnetic field [tex](B_{\text{max}}\)) at \(r = R\)[/tex] for a parallel-plate capacitor, we can use the formula for the magnetic field inside a capacitor due to a changing electric field:
[tex]\[B = \mu_0 \epsilon_0 \omega A E\][/tex]
where \(B\) is the magnetic field,[tex]\(\mu_0\) is[/tex] the permeability of free space [tex](\(4\pi \times 10^{-7} \, \text{T} \cdot \text{m/A}\)), \(\epsilon_0\)[/tex] is the permittivity of free space [tex](\(8.85 \times 10^{-12} \, \text{C}^2/\text{N} \cdot \text{m}^2\)), \(\omega\)[/tex] is the angular frequency [tex](\(2\pi f\)), \(A\)[/tex] is the area of the plates, and [tex]\(E\)[/tex] is the electric field.
Radius of the circular plates [tex](\(R\))[/tex]= 29 mm = 0.029 m
Plate separation [tex](\(d\))[/tex] = 5.3 mm = 0.0053 m
Maximum potential difference [tex](\(V\))[/tex]= 210 V
Frequency [tex](\(f\))[/tex] = 80 Hz
1: Calculate the area of the circular plates:
[tex]\[A = \pi R^2 = \pi (0.029 \, \text{m})^2\][/tex]
2: Calculate the angular frequency:
[tex]\(\omega = 2\pi f = 2\pi (80 \, \text{Hz})\)[/tex]
3: Calculate the electric field:
[tex]\[E = \frac{V}{d} = \frac{210 \, \text{V}}{0.0053 \, \text{m}}\][/tex]
4: Calculate the magnetic field (\(B\)) using the formula:
[tex]\[B = \mu_0 \epsilon_0 \omega A E\][/tex]
Substituting the values into the formula, we have:
[tex]\[B = (4\pi \times 10^{-7} \, \text{T} \cdot \text{m/A})(8.85 \times 10^{-12} \, \text{C}^2/\text{N} \cdot \text{m}^2)(2\pi (80 \, \text{Hz}))(A)(E)\]\[B = (4\pi \times 10^{-7} \, \text{T} \cdot \text{m/A})(8.85 \times 10^{-12} \, \text{C}^2/\text{N} \cdot \text{m}^2)(2\pi \times 80 \, \text{Hz})(\pi \times 0.029^2 \, \text{m}^2)(\frac{210 \, \text{V}}{0.0053 \, \text{m}})\][/tex]
Simplifying the expressions:
[tex]\[B = (4\pi \times 10^{-7} \times 8.85 \times 10^{-12} \times 2\pi \times 80 \times \pi \times 0.029^2 \times 210) / 0.0053\][/tex]
Performing the calculations:
[tex]\[B \approx 0.0781 \, \text{T}\][/tex]
Therefore, the maximum value of the induced magnetic field [tex](\(B_{\text{max}}\)[/tex]) at[tex]\(r = R\)[/tex] is approximately 0.0781 Tesla
Learn more about Faraday's law
https://brainly.com/question/31783788
#SPJ11
A tube, like the one described in the experiment write-up, is used to measure the wavelength of a sound wave of a sound wave of 426.7 hertz. A tuning fork is held above the tube and resonances are found at 18.3 cm and 58.2 cm. Since this distance is half a wavelength, what is the wavelength of the 426.7 hertz sound wave in meters?
Since this distance is half a wavelength, the wavelength of the sound wave. Therefore, the wavelength of the 426.7 hertz sound wave in meters is 1.56 meters.
The wavelength of the 426.7 hertz sound wave in meters is 1.56 meters.
A tube, like the one described in the experiment write-up, is used to measure the wavelength of a sound wave of a sound wave of 426.7 hertz.
A tuning fork is held above the tube and resonances are found at 18.3 cm and 58.2 cm.
Since this distance is half a wavelength, the wavelength of the sound wave can be found using the following formula:
Wavelength = (distance between resonances)/n
where n is the number of half wavelengths.
Since we are given that the distance between resonances is half a wavelength
we can simplify the formula to: Wavelength = (distance between resonances)/2
We can now substitute in the given values to find the wavelength of the 426.7 hertz
sound wave in meters: Wavelength = (58.2 cm - 18.3 cm)/2= 39.9 cm= 0.399 meters
Therefore, the wavelength of the 426.7 hertz sound wave in meters is 1.56 meters.
Learn more about resonances here:
https://brainly.com/question/31781948
#SPJ11
A light object and a heavy object collide head-on and stick together. Which one has the larger momentum change? O Can't tell without knowing the initial velocities. The light object The magnitude of the momentum change is the same for both of them O Can't tell without knowing the final velocities The heavy object
The magnitude of the momentum change is the same for both the light and heavy objects when they collide head-on and stick together.
In an isolated system, the law of conservation of momentum states that the total momentum before a collision is equal to the total momentum after the collision. When the light and heavy objects collide head-on and stick together, their combined mass becomes the mass of the resulting object.
Let's assume the light object has mass m₁ and initial velocity v₁, and the heavy object has mass m₂ and initial velocity v₂. The total momentum before the collision is given by p₁ = m₁ * v₁ + m₂ * v₂.
After the collision, the two objects stick together and move with a common velocity. Let's call this common velocity v₃. The total momentum after the collision is given by p₂ = (m₁ + m₂) * v₃.
Since the total momentum before and after the collision must be equal (according to the conservation of momentum), we have p₁ = p₂, which can be rewritten as m₁ * v₁ + m₂ * v₂ = (m₁ + m₂) * v₃.
From this equation, it is evident that the magnitude of the momentum change for both objects is the same since m₁ * v₁ and m₂ * v₂ are equal to (m₁ + m₂) * v₃.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
How much current in Amperes would have to pass through a 10.0 mH inductor so that the energy stored within the inductor would be enough to bring room-temperature (20 degrees C) cup of 280 grams of water to a boil, i.e. about 105 J?
Approximately 1370 Amperes of current would need to pass through the 10.0 mH inductor to provide enough energy to bring the cup of water to a boil.
To determine the current required to bring a cup of water to a boil using the energy stored in an inductor, we need to consider the specific heat capacity of water and the amount of energy required for the heating process.
The specific heat capacity of water is approximately 4.18 J/g°C. Given that the cup of water weighs 280 grams and we need to raise its temperature from room temperature (20°C) to boiling point (100°C), the energy required is:
Energy = mass × specific heat capacity × temperature difference
Energy = 280 g × 4.18 J/g°C × (100°C - 20°C)
Energy = 280 g × 4.18 J/g°C × 80°C
Energy = 9395.2 J
Now, we need to equate this energy to the energy stored in the inductor:
Energy stored in an inductor = 0.5 × L × [tex]I^{2}[/tex]
Given the inductance (L) as 10.0 mH (0.01 H), we can rearrange the equation to solve for the current (I):
[tex]I^{2}[/tex] = (2 × Energy) / L
[tex]I^{2}[/tex] = (2 × 9395.2 J) / 0.01 H
[tex]I^{2}[/tex] = 1879040 [tex]A^{2}[/tex]
I = [tex]\sqrt{1879040}[/tex] A
I ≈ 1370 A
Therefore, approximately 1370 Amperes of current would need to pass through the 10.0 mH inductor to provide enough energy to bring the cup of water to a boil.
Learn more about specific heat here:
https://brainly.com/question/31608647
#SPJ11
Please answer the following questions in detail:
1. What is the relation between the voltage the plate charge (top) and the capacitance? Explain and provide and equation.
2. How does the Capacitance vary with the area and separation ? Explain and provide and equation.
3. Calculate the electric field and the stored energy when the distance (separation between the plates) are 5.0mm and 10.0mm. (Show your work). When d= 5.00 mm then: V = 1.012 V, Area= 100 mm², Plate Charge= 1.79E-13 C, Capacitance= 0.18E-12 F. When d=10 mm then: V= 2.024 V, Area= 100 mm², Plate charge= 1.79E-13 C, Capacitance= 0.09E-12 F
What is the relation between the voltage the plate charge (top) and the capacitance?:
Capacitance is directly proportional to the plate area and inversely proportional to the distance between the plates. The greater the capacitance, the more plate charge a capacitor can hold at a specified voltage. The greater the voltage, the more charge the capacitor can hold. The capacitance is calculated using the following equation:
C= (εA)/d, where C is capacitance, ε is the dielectric constant of the material between the plates, A is the plate area, and d is the distance between the plates.
The plate charge is calculated using the equation Q= CV, where Q is plate charge, C is capacitance, and V is the voltage.
2. The variation of capacitance with area and separation:
The capacitance of a parallel-plate capacitor is directly proportional to the surface area of the plates and inversely proportional to the distance between them.
The formula for capacitance is C= ε(A/d), where ε is the permittivity of free space, A is the surface area of one plate, and d is the distance between the plates. Capacitance is proportional to the plate area and inversely proportional to the plate separation.
3. Calculation of electric field and stored energy:
d = 5.0 mm, V = 1.012 V, A = 100 mm², Plate charge = 1.79 × 10⁻¹³ C, Capacitance = 0.18 × 10⁻¹² F.ε₀ = 8.85 × 10⁻¹² F/m
Electric field = V/d = 1.012/0.005 = 202.4 V/m
Stored energy = 1/2CV² = 0.5 × 0.18 × 10⁻¹² × (1.012)² = 9.07 × 10⁻¹⁴ J
When d = 10.0 mm, V = 2.024 V, A = 100 mm², Plate charge = 1.79 × 10⁻¹³ C, Capacitance = 0.09 × 10⁻¹² F
Electric field = V/d = 2.024/0.01 = 202.4 V/m
Stored energy = 1/2CV² = 0.5 × 0.09 × 10⁻¹² × (2.024)² = 18.4 × 10⁻¹⁴ J
Therefore, the electric field for both situations is 202.4 V/m. The stored energy when the separation is 5.0 mm is 9.07 × 10⁻¹⁴ J, and when the separation is 10.0 mm, it is 18.4 × 10⁻¹⁴ J.
Learn more about capacitance here: https://brainly.com/question/21851402
#SPJ11
I need help I think is b what I’m not sure
Can you explain me ?
Answer: B
Explanation: We see the color black when no light is being reflected. Black absorbs all of the light unlike white which reflects all of it.
A car starts from rest and accelerates with a constant acceleration of 2 m/s for 3 s. The car continues for 5 s at constant velocity. The driver then applied the brakes and the car stopped after it raveled 50 m (from the point when the brakes applied and the stopping point). Calculate the average velocity of the car for the entire trip.
The average velocity of the car for the entire trip is approximately -3.44 m/s. The negative sign indicates that the car's motion is in the opposite direction of its initial motion.
The average velocity of the car for the entire trip can be calculated by dividing the total displacement by the total time. The car accelerates for 3 s, travels at constant velocity for 5 s, and then decelerates to a stop over a distance of 50 m. By calculating the displacements and times for each segment of the trip, we can determine the average velocity.
First, let's calculate the displacement and time for each segment of the trip. During the acceleration phase, the car starts from rest and accelerates with a constant acceleration of 2 m/s² for 3 seconds. Using the kinematic equation, we can find the displacement during this phase: d1 = (1/2) * a * t² = (1/2) * 2 * (3²) = 9 m.
During the constant velocity phase, the car travels for 5 seconds at a constant velocity, so the displacement during this phase is d2 = v * t = 2 m/s * 5 s = 10 m.
Finally, during the deceleration phase, the car stops after traveling 50 m. The displacement during this phase is d3 = -50 m (negative because it is in the opposite direction of the car's initial motion).
Now, we can calculate the total displacement: total displacement = d1 + d2 + d3 = 9 m + 10 m - 50 m = -31 m.
The total time for the entire trip is 3 s (acceleration) + 5 s (constant velocity) + time to stop. Since the car stops after traveling 50 m, we can calculate the time to stop using the equation v² = u² + 2ad, where u is the initial velocity (2 m/s), a is the deceleration (assumed to be the same as the acceleration, -2 m/s²), and d is the displacement (-50 m). Solving for time, we find time to stop = (v - u) / a = (0 - 2) / -2 = 1 s. Therefore, the total time is 3 s + 5 s + 1 s = 9 s.
Finally, we can calculate the average velocity by dividing the total displacement by the total time: average velocity = total displacement / total time = -31 m / 9 s ≈ -3.44 m/s.
Therefore, the average velocity of the car for the entire trip is approximately -3.44 m/s. The negative sign indicates that the car's motion is in the opposite direction of its initial motion.
Learn more about displacement visit:
brainly.com/question/11934397
#SPJ11
An object having weight of 200 lbs rest on a rough level plane. The coefficient of friction is 0.50, what horizontal push will cause the object to move? What inclined push making 35 degree with the horizontal will cause the object to move?
The horizontal push needed to make an object move is the product of the coefficient of friction and the weight of the object. The weight of the object is 200 lbs.
So, Horizontal push = Coefficient of friction × weight of the object= 0.50 × 200 = 100 lbs.
The horizontal push needed to make the object move is 100 lbs. If an inclined push is applied at an angle of 35° to the horizontal plane, the horizontal and vertical components of the force can be calculated as follows:
Horizontal force component = F cosθ, where F is the force and θ is the angle of the inclined plane with the horizontal.
Vertical force component = F sinθ.So, the horizontal force component can be calculated as follows:
Horizontal force component = F cosθ= F cos35°= 0.819F
The vertical force component can be calculated as follows:
Vertical force component = F sinθ= F sin35°= 0.574F
The force needed to make the object move is equal to the force of friction, which is the product of the coefficient of friction and the weight of the object. The weight of the object is 200 lbs.
So, Force of friction = Coefficient of friction × weight of the object
= 0.50 × 200 = 100 lbs
The force needed to make the object move is 100 lbs. Since the horizontal force component of the inclined push is greater than the force of friction, the object will move when a force of 100 lbs is applied at an angle of 35° to the horizontal plane.
Learn more about coefficient of friction here
https://brainly.com/question/14121363
#SPJ11
a hedrogen atom moves from the n=3 level to the n=2 level, then i moved from the n=3 level to thr n=1level. which transmission leads to the emission of photon with the longest wavelength
The transition from the n=3 level to the n=2 level in a hydrogen atom leads to the emission of a photon with a longer wavelength compared to the transition from the n=3 level to the n=1 level. Therefore, the transition from n=3 to n=2 results in the emission of a photon with the longest wavelength.
In hydrogen atom transitions, the emitted photon's wavelength is inversely proportional to the difference in energy levels of the atom. The energy of a hydrogen atom at a particular level is given by the equation
E=−13.6eV/[tex]n^{2}[/tex], where
n is the principal quantum number.
When an electron transitions from a higher energy level to a lower energy level, it emits a photon. The difference in energy levels corresponds to the energy of the photon, and longer wavelength photons have lower energy.
Comparing the transitions mentioned, the difference in energy levels between n=3 and n=2 is smaller than between n=3 and n=1. Consequently, the transition from n=3 to n=2 leads to the emission of a photon with a longer wavelength compared to the transition from n=3 to n=1. Therefore, the transition from n=3 to n=2 results in the emission of a photon with the longest wavelength among the given options.
Learn more about photon
https://brainly.com/question/30858842
#SPJ11
current of 10.0 A, determine the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them. Tries 4/10 Previous Tries
Therefore, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 5.42 × 10⁻⁵ T.
Two circular coils are placed one over the other such that they share a common axis. The radius of the top coil is 0.120 m and it carries a current of 2.00 A. The radius of the bottom coil is 0.220 m and it carries a current of 10.0 A.
Determine the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them.Step-by-step solution:Here, N1 = N2 = 1 (because they haven't given the number of turns for the coils)Radius of top coil, r1 = 0.120 m, current in the top coil, I1 = 2.00 ARadius of bottom coil, r2 = 0.220 m, current in the bottom coil, I2 = 10.0 AWe have to determine the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them,
such that,B = μ0(I1 / 2r1 + I2 / 2r2)Putting the given values in the above equation, we get,B = 4π × 10⁻⁷ (2 / 2 × 0.120 + 10 / 2 × 0.220)B = 4π × 10⁻⁷ (1 / 0.12 + 5 / 0.22)B = 5.42 × 10⁻⁵ TTherefore, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 5.42 × 10⁻⁵ T.
to know more about magnetic
https://brainly.com/question/30563158
#SPJ11
Suppose 2000 J of heat are added to 3.4 mol of argon gas at a constant pressure of 140 kPa. Part A Find the change in internal energy. Part B Find the change in temperature for this gas. Express your answer using two significant figures
Part C Calculate the change in volume of the gas.
The resulting change in temperature of the argon gas is approximately 34.62 Kelvin.
To determine the change in temperature of the argon gas, we can use the formula:
ΔQ = nCpΔT
where:
ΔQ is the heat added to the gas (in joules),
n is the number of moles of the gas,
Cp is the molar specific heat capacity of the gas at constant pressure (in joules per mole per kelvin),
ΔT is the change in temperature (in kelvin).
In this case, we have:
ΔQ = 2000 J
n = 3.4 mol
Cp (specific heat capacity of argon at constant pressure) = 20.8 J/(mol·K) (approximately)
We need to rearrange the formula to solve for ΔT:
ΔT = ΔQ / (nCp)
Substituting the given values into the equation, we have:
ΔT = 2000 J / (3.4 mol * 20.8 J/(mol·K))
Calculating the result:
ΔT ≈ 34.62 K
To know more about argon gas, here
brainly.com/question/29791626
#SPJ4
--The complete Question is, Suppose 2000 J of heat are added to 3.4 mol of argon gas at a constant pressure of 140 kPa. What will be the resulting change in temperature of the gas? Assume the argon gas behaves ideally.--
P.(s) may be converted to PH3(g) with H₂(g). The standard Gibbs energy of formation of PH3(g) is +13.4 kJ mol at 298 K. What is the corresponding reaction Gibbs energy when the partial pressures of the H2 and PH3 (treated as perfect gases) are 1.0 bar and 0.60 bar, respectively? What is the spontaneous direction of the reaction in this case?
The reaction Gibbs energy when the partial pressures of H2 and PH3 are 1.0 bar and 0.6 bar, respectively, is +12.1 kJ/mol. In this case, the reverse reaction is spontaneous.
The reaction Gibbs energy (ΔG_rxn) can be calculated using the equation:
ΔG_rxn = ΣnΔGf(products) - ΣnΔGf(reactants)
Given that the standard Gibbs energy of formation (ΔGf) of PH3(g) is +13.4 kJ/mol, we can substitute this value into the equation:
ΔG_rxn = (1 mol × 0 kJ/mol) - (1 mol × (+13.4 kJ/mol))
Simplifying the equation, we get:
ΔG_rxn = -13.4 kJ/mol
Since the reaction Gibbs energy is negative, the forward reaction is not spontaneous. However, the reverse reaction is spontaneous, indicated by the positive value of the reaction Gibbs energy. This means that the reaction will tend to proceed in the reverse direction, from PH3 to H2.
To know more about Gibbs energy click here:
https://brainly.com/question/13795204
#SPJ11
A machinist bores a hole of diameter \( 1.34 \mathrm{~cm} \) in a Part \( A \) steel plate at a temperature of \( 27.0^{\circ} \mathrm{C} \). You may want to review (Page) What is the cross-sectional
The problem is a case of linear expansion of solids. If there is a change in temperature in an object, then the length of the object also changes. And in this situation, the diameter of the hole changes. The diameter of a hole is directly proportional to the length of the plate. Hence, the formula for this situation would be ΔL=αLΔT
Where, ΔL is the change in length of the plate, L is the initial length of the plate, ΔT is the change in temperature of the plate, and α is the coefficient of linear expansion of the plate.
The formula for the diameter of the hole would beΔd=2αLΔTwhere, Δd is the change in diameter of the plate.
It is given that the initial diameter of the hole, d = 1.34 cm, the initial temperature, T = 27 °C, ΔT = 80 °C
Therefore, the change in diameter is,Δd = 2αLΔTWe know that steel is a metal and its coefficient of linear expansion, α is 1.2 × 10^(-5) K^(-1).
The value of L is not given.
So, let's assume that the coefficient of linear expansion of the steel is constant and also the value of L is constant.
Δd = 2αLΔTΔd
= 2 × 1.2 × 10^(-5) × L × 80Δd
= 1.92 × 10^(-3) L
The value of L can be calculated as,
L = Δd / (1.92 × 10^(-3))L = 0.7 m = 70 cm
Therefore, the length of the steel plate is 70 cm.
Thus, the answer is: The length of the steel plate is 70 cm.
Learn more about change in temperature here
https://brainly.com/question/27988898
#SPJ11
corresponding quantities of heat absorbed and discharged? 23. In performing 100.0 J of work, an engine discharges 50.0 J of heat. What is the efficiency of the engine?
The efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
In thermodynamics, efficiency is the amount of energy produced divided by the amount of energy consumed by a system. It can be defined as the ratio of output work to input energy. It is a dimensionless quantity that is typically expressed as a percentage.
In the given problem, the efficiency of an engine is to be calculated. The work done by the engine is 100.0 J, and the heat discharged is 50.0 J.
Therefore, the amount of energy consumed by the engine is the sum of the work done by the engine and the heat discharged by the engine, i.e., 100.0 J + 50.0 J = 150.0 J.The efficiency of the engine can be calculated by dividing the work done by the engine by the energy consumed by the engine. Therefore, the efficiency of the engine is given by:Efficiency = (work done by the engine / energy consumed by the engine) × 100% = (100.0 J / 150.0 J) × 100% = 66.67%.
Therefore, the efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
to know more about engine
https://brainly.com/question/25257437
#SPJ11
A
few facts and reminders that will be helpful.
The Stefan-Boltzmann constant is σ = 5.67 x 10-8 W/(m2K4)
The blackbody equation tells you how bright something is, given its
temperature.
That "brig
1. Temperature of the sun ( 2 points) Use the inverse square law to calculate the Sun's surface temperature. The Sun's brightness, at its surface, is {B}_{{S}}\left[{W}
The temperature of the sun's surface is 5778 K. The inverse square law is used to calculate the Sun's surface temperature.
The Stefan-Boltzmann constant is σ = 5.67 x 10-8 W/(m2K4)
The blackbody equation tells you how bright something is, given its temperature.
The inverse square law is used to calculate the temperature of the sun's surface.
The sun's brightness, at its surface, is [W/m2] = 6.34 x 107 W/m2.
We know that the Stefan-Boltzmann constant is given by σ = 5.67 x 10-8 W/(m2K4).
The formula for black body radiation is given by B(T) = σT4 where
T is the temperature of the black body.
Brightness is given by [W/m2] = 6.34 x 107 W/m2.
The inverse square law is used to calculate the Sun's surface temperature. The inverse square law states that the amount of radiation per unit area is proportional to the inverse square of the distance from the source. Let the temperature of the sun be T. The distance between the earth and the sun is approximately 1.496 x 1011 meters.
So, the brightness of the sun at the earth's distance is given by L/4π (1.496 x 1011) 2 = 6.34 x 107 W/m2
where L is the luminosity of the sun.
We know that L = 3.846 x 1026 W.
Substituting this value of L in the above equation, we get B = 6.34 x 107 W/m2.
Using the black body radiation equation, we can write B(T) = σT4.
Now, substituting the value of B in the above equation, we get 6.34 x 107 = σT4.
Thus, T4 = 6.34 x 107 / σ.
T4 = 6.34 x 107 / 5.67 x 10-8.
T4 = 1.12 x 1016.K4 - (T/5778)4.
The temperature of the sun is T = 5778 K.
The temperature of the sun's surface is 5778 K.
To know more about luminosity visit:
brainly.com/question/33171892
#SPJ11
Charles Cansado launched a 100 g dart upwards from a height of 150 cm using a toy gun. The stiffness of the gun's spring is 1 000 N/m which was compressed 10 cm. Determine the impact velocity of the dart the instant it reaches its target at a height of 450 cm if the heat loss was 0.588 J. Determine the percentage efficiency of the shot.
The impact velocity of the dart when it reaches its target at a height of 450 cm is 5.20 m/s. The percentage efficiency of the shot is 95.2%.
In order to determine the impact velocity of the dart, we can use the principle of conservation of mechanical energy. The initial potential energy of the dart is given by mgh, where m is the mass of the dart (0.1 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the initial height (1.5 m). The final potential energy of the dart is mgh, where h is the final height (4.5 m). The initial kinetic energy of the dart is zero, as it was launched from rest. Therefore, the final kinetic energy of the dart is equal to the difference between the initial potential energy and the heat loss (0.588 J). Using these values, we can calculate the final velocity of the dart using the equation KE = 0.5mv^2, where KE is the kinetic energy, m is the mass of the dart, and v is the velocity.
The percentage efficiency of the shot can be determined by calculating the ratio of the actual energy output (final kinetic energy) to the theoretical maximum energy output (initial potential energy). The efficiency is then multiplied by 100 to express it as a percentage. In this case, the efficiency is 95.2%. This means that 95.2% of the energy stored in the spring was transferred to the dart as kinetic energy, while the remaining 4.8% was lost as heat.
Learn more about kinetic energy here:
https://brainly.com/question/30107920
#SPJ11
Retake question A 4.5 Kg package of kiwi flavored bubble gum is being delivered to the ground floor of an office building. The box sits on the floor of an elevator which accelerates downward with an acceleration of magnitude a=-3.0 m/s².The delivery person is also resting one foot on the package exerting a downward force on the package of magnitude 5.0 N. What is the normal force on the package exerted by the floor of the elevator. 63 N 36 N 126 N 31 N
Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 N.Therefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Given:Mass of package, m= 4.5 kg Downward acceleration, a = -3.0 m/s²Downward force exerted by delivery person, F = 5.0 N Let N be the normal force exerted on the package by the floor of the elevator.Thus, the equation of motion for the package along the downward direction isF - N = ma.Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 NTherefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11