Answers
Answer:
0.99 μmol/L
Explanation:
From the question given above, the following data were obtained:
Volume of stock solution (V₁) = 20 mL
Concentration of stock solution (C₁) = 18.8 μmol/L
Volume of diluted solution (V₂) = 380 mL
Concentration of diluted solution (C₂) =?
The concentration of the diluted solution can be obtained as follow:
C₁V₁ = C₂V₂
18.8 × 20 = C₂ × 380
376 = C₂ × 380
Divide both side by 380
C₂ = 376 / 380
C₂ = 0.99 μmol/L
Therefore, the concentration of the diluted solution the chemist is working on is 0.99 μmol/L
Related Questions
When the rate of the forward reaction equals the rate of the backward reaction, the system is said to be in (2 points)
a. reverse
b. dynamic equilibrium
c. homeostasis
d. suspended state
Answers
Answer:
I believe b, dynamic equilibrium
Explanation:
Combine terms: 12a + 26b -4b – 16a.
Answers
Answer:
= -4a+22b
Explanation:
i hope this helps :)
Answer:
12a-16a =-4a
26b -4b =22b
the final answer is-4a +22b
How many grams of CuSO4 are required to make a 5.0 ml solution that has a concentration of 400 mg/ml?
Answers
Answer: molecular weight of CUSO4 or grams. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles CUSO4, or 346.10221 grams. Note that rounding errors may occur, so always check the results.
Explanation:
Consider a buffer made by adding 132.8 g of NaC₇H₅O₂ to 300.0 mL of 1.17 M HC₇H₅O₂ (Ka = 6.3 x 10⁻⁵) What is the pH of this buffer?
Answers
Answer:
pH = 1.62
Explanation:
We can solve this problem using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[A^-]}{[HA]}[/tex]Where
pKa = -log(Ka) = 4.20[A⁻] = [NaC₇H₅O₂][HA] = [HC₇H₅O₂]Now we convert 132.8 g of NaC₇H₅O₂ into moles, using its molar mass:
132.8 ÷ 144.11 g/mol = 0.921 molesThen we calculate [NaC₇H₅O₂]:
0.921 moles / 300.0 mL = 0.003 MNow we can proceed to calculate the pH of the solution:
pH = 4.20 + log[tex]\frac{0.003}{1.17}[/tex]pH = 1.62Considering the limiting reactant concept, how many moles of copper(1) sulfide are produced from the reaction of 20 mole of
copper and 2.4 mole of sulfur?
2 Cu(s) + s(s) Cu2S(s)
(No links or bad answer real d
Answers
When the space shuttle took off it used two different rocket systems. The main engines were powered by combining oxygen and hydrogen in the highly exothermic reaction
2H2 + O2 ⇌ 2H2O
The fuel was stored in that brown tank in liquid form as liquid oxygen (LOX) and liquid hydrogen (LH2). Liquids are much more dense than gases, so storage in the liquid phase allows the shuttle to carry an immense amount of fuel.
Unfortunately, that fuel made up the majority of the weight of the shuttle at liftoff. So most of what the shuttle engines lifted from the ground was fuel. That means it was very important not to have too much of one or the other reactant on board. We'd want just enough hydrogen to react with the amount of oxygen on board, and vice versa. That's where stoichiometry and moles are essential. Sana makatulong po sa inyo
Humans are always consumers. Most humans are omnivores, but some
humans eat only plant matter making them herbivores. However, all
humans are considered to be -
Select one:
autotrophs
heterotrophs
producers
carnivores
Answers
Answer:
A. Autotrophs
Explanation:
an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.
humans and other mammals, plants, and a select few other things
6.3x10-5M. What is the pH?
Answers
Answer:
https://sensorex.com/ph-calculator/
Explanation:
go to this link and then scroll down a little bit and then you'll find the answer
How many moles of solute are in a .5 liter solution of carbonated water, if the concentration is 3.0 M?
Answers
Answer:
[tex]1 \: litre \: solution \: contains \: 3 \: moles \\ 5 \: litres \: will \: contain \: \frac{(5 \times 3)}{1} \: moles \\ = 15 \: moles \: of \: solute[/tex]
Jacob is doing a report on the galaxy in which Earth is found. Which of the following is the galaxy that Jacob should research for his report?
Andromeda
Milky Way
Maffei 1
Ursa Minor
Answers
Answer:
milky way
Explanation:
10. Which of the following group of colors of the visible light is listed from
lowest to highest frequency?
A. Blue, green, red
C. Red, violet, green
B. Green, blue, red
D. Red, green, violet
Answers
Answer:
The correct answer is - D. Red, green, violet.
Explanation:
Visible light is the spectrum of light that can be seen by the naked eyes of humans without any equipment. This spectrum has various frequency light that helps us see things in color. The frequency of light ranges between seven different colors in which violet has the highest frequency and red has the lowest.
The different frequencies are as follows:
color frequency
red (limit) 1.77
red 1.91
orange 2.06
yellow 2.14
green 2.25
cyan 2.48
blue 2.75
violet (limit) 3.10
On this basis of this the group of colors of the visible light is listed from
lowest to the highest frequency - Red, green, violet
Students can demonstrate reflection by doing which of the following?
A Warming metal under a heat lamp.
B. Observing their own image in still water.
C. Enlarging an image using a hand lens.
0
D. Measuring a shadow made by the Sun.
Answers
Answer:
a
Explanation:
In the endothermic reaction below, how would adding heat affect the equilibrium of the system? (2 points)
A + B + energy ⇄ + D
a. shift it to the left toward the reactants
b. shift it to the right toward the products
c. equally create more products and reactants
d. it would have no effect
Answers
Liquid water - heat =
Pls help now!!!
Answers
Answer:
cold or ice?
Explanation:
have a good day.
A sample of 0.0255 mol potassium hydroxide, KOH, was dissolved in water to yield
10.0 mL of solution. What is the molarity of the solution?
Answers
According to molar concentration, the molarity of the solution is 2.55 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
Substituting values in the given second formula, molarity=0.0255/0.010=2.55 M.
Thus, the molar concentration of the solution is 2.55 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
How much heat is released if you produced 1.24 mol of Oz?
Answers
When you are riding a bicycle at night, your bicycle's reflectors help people in cars see your bicycle how do bicycle reflectors work
A. They are made of a special material that gives off its own light
B. They are hooked up to batteries that allow them to produce light
C. They bounce light back from other sources
D. They are coverd with paint that glows in the dark
Answers
Explanation: the material of the bicycle reflectors cannot produce its own light. When light hits the material, it bounces back off of it creating the illusion of a light.
14.3 moles of methane (CH4) burns completely, find the grams of H20 would be produced CH4 + 202 CO2 + 2H20 w
Answers
Answer:
514.8 grams of H₂O would be produced.
Explanation:
The balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles participate in the reaction:
CH₄: 1 mole O₂: 2 molesCO₂: 1 mole H₂O: 2 molesBeing the molar mass of each compound:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/mole H₂O: 18 g/moleBy stoichiometry, the following amounts of mass participate in the reaction:
CH₄: 1 mole* 16 g/mole= 16 gramsO₂: 2 moles* 32 g/mole= 64 gramsCO₂: 1 mole* 44 g/mole= 44 gramsH₂O: 2 moles* 18 g/mole= 36 gramsYou can apply the following rule of three: if 1 mole of methane produces 36 grams of water, 14.3 moles of methane produces how much mass of water?
[tex]mass of water=\frac{14.3 moles of methane*36 grams of water}{1 mole of methane}[/tex]
mass of water= 514.8 grams
514.8 grams of H₂O would be produced.
If four hydrogen atoms react with two hydrogen atoms, how many atoms
will be in the product?
Answers
Answer:6
Explanation:
The number of atoms in the product will be equal to six.
What is the balanced chemical equation?A chemical equation represents a chemical reaction in terms of the chemical symbols of the substances. A chemical equation of a reaction posses of participated reactants, formed products, and an arrow to indicate the direction of the chemical reaction.
The chemical equation of a reaction in which the number of atoms of each element is equal on either side of the equation is known as a balanced chemical equation.
The law of conservation of mass is always followed by a balancing of a chemical equation. By following this law, the total mass of all the elements on the reactant side will be equal to the total mass of all elements on the product side in a balanced chemical equation.
Therefore, the number of hydrogen atoms on the reactant side is equal to 6 (4+2) and the same number of atoms will be on the product side.
Learn more about the balanced chemical equation, here:
brainly.com/question/15052184
#SPJ2
;_; help please i need help TwT
Answers
Answer:
it's a day I think so ........
Answer:
Lunar cycle
Explanation:
Year is the amount of time for the Earth to rotate a complete circle around the sun.
Lunar cycle (moon phases) is the rotation of the Moon around the Earth.
Day is the time for the Earth to rotate on its own axis completely.
Solar cycle is the changes that the sun's electric field goes through about every 11 years.
A ________________________ can be at the top of a food chain.
Answers
Answer:
ap.ex predat0rs
Explanation:
Which compound will be the most soluble in water?
a) CH3CH2CH2CH2CH3
b) CH3CH2CH2CH2OH
c) HOCH2CH2CH2OH
d) CH3CH2CH2OCH3
Answers
Answer:
c) HOCH2CH2CH2OH
Explanation:
Hope this helps
What would happen to the moon’s interia were to increase? A the moon will fly into space. B the moon will smash into Earth. C the moon will smash into pluto.
Answers
Answer:
B
Explanation:
explain the significance
Answers
Answer:
Dictionary
Definitions from Oxford Languages
Search for a word
significance
/sɪɡˈnɪfɪk(ə)ns/
Learn to pronounce
noun
1.
the quality of being worthy of attention; importance.
"adolescent education was felt to be a social issue of some significance"
Similar:
importance
import
noteworthiness
consequence
substance
seriousness
gravity
weight
weightiness
magnitude
moment
momentousness
memorableness
unforgettableness
pronounced nature
remarkableness
outstanding nature
markedness
obviousness
conspicuousness
strikingness
distinction
impressiveness
uncommonness
unusualness
rarity
extraordinariness
exceptionalness
specialness
cruciality
Opposite:
insignificance
2.
the meaning to be found in words or events.
"the significance of what was happening was clearer to me than to her"
Similar:
meaning
sense
signification
import
thrust
drift
gist
burden
theme
implication
tenor
message
essence
substance
relevance
Which of the following is a homogenous mixture?
A. chicken noodle soup
B. Kool-Aid
C. water
Answers
Answer:
Kool- aid
Explanation:
because it is the same throughout and can be seperated
Answer:
C. water
Explanation:
The nature particle model of matter describe the property of solid, liquid and gas in molecular level. Which of the given statements below is TRUE?
A. Matter is made up of large particles.
B. Particles of matter have spaces between them.
C. Particles of matter are not moving all the time.
D. The particles of matter do not attract each other.
Answers
Answer:
B. Particles of matter have spaces between them.
Explanation:
The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :
1. Matter is made of small particles of atoms or molecules.
2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.
3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.
4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.
The correct option is B.
Determine the mass and weight of the air in your living room at 20°C ; the room has the following dimensions ;4m ×5m floor and ceiling is at 3m height. Take the density of the air as
Answers
Answer:
Volume of air is [tex]60[/tex] cubic meter
Mass of air is [tex]72.246[/tex] Kilogram
Explanation:
As air occupies the volume of the container in which it is kept. The volume of air here in this case will be equal to the volume of the room.
Volume of the room = length * breadth * height
Volume of the room = [tex]4*5*3 = 60[/tex] cubic meter.
Volume of air is also [tex]60[/tex] cubic meter.
Density of air at 20 degrees C [tex]= 1.2041[/tex] kg/cu.m
Mass of air
Volume * density
[tex]60 * 1.2041 = 72.246[/tex] kilogram
Volume of air is [tex]60[/tex] cubic meter
Mass of air is [tex]72.246[/tex] Kilogram
The reactants of two chemical equations are listed. Equation 1: PbNO3 + Mg Equation 2: PbNO3 + KI Based on the type of reaction, which reaction can be used to extract lead metal from lead nitrate solution? (5 points)
Group of answer choices
Equation 2, because K being more reactive, exchanges position with Pb in PbNO3
Equation 2, because K being more reactive, exchanges position with N in PbNO3
Equation 1, because Mg being more reactive, replaces N from PbNO3
Equation 1, because Mg being more reactive, replaces Pb from PbNO3
Answers
Answer:
Equation 2, because K being more reactive, exchanges position with Pb in PbNO3.
Explanation:
Hello there!
In this case, according to the given reactions, it is possible to realize that according to the reactivity series, since K is is group 1A of alkali metals, we infer it is by far more reactive than magnesium, for that reason last two choices can be easily discarded. Now, considering equation 2, it would be necessary to complete it to figure out the correct option:
[tex]Pb(NO_3)_2 + KI \rightarrow PbI_2+KNO_3[/tex]
Whereas it can be seen that potassium exchanges position with Pb according to the double displacement reaction; therefore, the correct answer is "Equation 2, because K being more reactive, exchanges position with Pb in PbNO3".
Best regards!
9. The broken appearance of pencil in a glass of water is due
to the refraction of light in water,
yes or no
Answers
1. What volume of gas (NU) is formed by the interaction of 13 g of zinc with 400 g of sulfuric acid solution with a mass fraction of 10%?
Answers
Answer:
4.5L of gas are produced
Explanation:
Based on the reaction:
Zn + H2SO4 → ZnSO4 + H2(g)
Where 1 mole of Zn reacts with 1 mole of sulfuric acid to produce 1 mole of H2, the gas
To solve this question we must find the moles of each reactant in order to find limiting reactant and, thus, the moles of H2 produced. Then using PV=nRT we can find the volume of the gas:
Moles Zn -Molar mass: 65.38g/mol-
13g * (1mol / 65.38g) = 0.20 moles Zn
Moles H2SO4 -Molar mass: 98g/mol-
400g * 10% = 40g H2SO4 * (1mol / 98g) = 0.41 moles H2SO4
As the ratio of the reaction is 1:1, the limiting reactant is Zn and the moles produced of H2 are 0.20 moles
Using PV = nRT; V = nRT/ P
Where V is the volume of the gas
n are the moles = 0.20 moles
R is gas constant = 0.082atmL/molK
T is absolute temperature = 273.15K at STP
P is pressure = 1atm at STP
V = 0.20mol*0.082atmL/molK*273.15K / 1atm
V = 4.5L of gas are produced
Jupiter's mass is more than _________ the mass of the other planets put together.
Answers
Answer:
2.5 times
Explanation:
Jupiter's mass is 2.5 times that of all the other planets in the Solar System combined—this is so massive that its barycenter with the Sun lies beyond the Sun's surface at 1.068 solar radii from the Sun's center.
Explanation: I’ve gotten asked this question in class before