The ratio of time of flight for inelastic collision to elastic collision is 1 : 2.
An inelastic collision is a type of collision in which the kinetic energy does not remain the same before and after the collision, while an elastic collision is a type of collision in which the kinetic energy remains the same before and after the collision.
initial kinetic energy = final kinetic energy(1/2)*m*u² = (1/2)*m*v²mass of the bullet, = m₁
mass of the block, = m₂
initial velocity of the bullet, = u₁
initial velocity of the block, = u₂ = 0
final velocity of the block = v
When inelastic motion is considered:final velocity of the b can be calculated by the formula,
m₁u₁ + m₂u₂ = v ( m₁ + m₂)
v = ( m₁u₁ + m₂u₂ ) / ( m₁ + m₂)
According to the equation of motion,
v = u + at
u = o
v = at ( a=g )
t = v/g
t = ( m₁u₁ + m₂u₂ ) / {g*( m₁ + m₂)}
When elastic motion is considered:final velocity will be given by ,
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Since u₂ = 0
m₁u₁ = m₁v₁ + m₂v₂
the block undergoes unidirectional motion,
so u₁ + (-v₁) = u₂ + v₂
v₁ = u₁ - v₂
therefore, m₁u₁ = m₁(u₁ - v₂) + m₂v₂
v₂ = 2m₁u₁ / ( m₁ + m₂)
According to the equation of motion,
v = u + at
u = o
v = at ( a=g ) ( v=v₂) ( t=t₂)
t₂ = v₂/g
t₂ = 2m₁u₁ / g( m₁ + m₂)
Ratio of t₁ and t₂ is ( m₁u₁ + m₂u₂ ) / {g*( m₁ + m₂)} / 2m₁u₁ / g( m₁ + m₂)
t₁ : t₂ = 1 : 2.
The question is incomplete, the complete question is:
A bullet of mass M1 is fired towards a block of mass m2 initially at rest at the edge of a frictionless table of height h as in the figure. The initial speed of the bullet is vi . Consider two cases, a completely inelastic one and an elastic one, where the bullet bounces off the block. inelastic case elastic case a bullet inside no bullet inside A B A' B' What is the ratio of the flight time
To know more about inelastic collision,
https://brainly.com/question/25834800
#SPJ4
1. What is the atomic mass of the new atom?
2. What is the atomic number of the new atom?
3. What is the symbol of the new atom?
4. What type of decay is demonstrated here?
1. The atomic mass of the new atom be 223. Option (d) is correct.
2. The atomic number of the new atom be 88. Option (g) is correct.
3. The symbol of the new atom be Ra. Option (e) is correct.
4. Beta decay is demonstrated here. Option (c) is correct.
What is Beta decay?A proton inside the radioactive sample's nucleus can change into a neutron or vice versa through a process known as beta decay. Because of processes like beta decay and alpha decay, the radioactive sample's nucleus is able to get as close as practical to the optimum neutron/proton ratio.
A beta particle, which can either be an electron or a positron, is released by the nucleus during this process. Think about the potential for a proton or neutron to decay into another particle. The production of the electron and positron adheres to the law of charge conservation. Beta-decay is the outcome of weak interaction.
Learn more about Beta decay here:
brainly.com/question/25455333
#SPJ1
A ray of light strikes a smooth surface and is reflected. The angle of incidence is 35°. What can be predicted about the angle of reflection?
Answer:
35 degrees
Explanation:
The law of reflection states that the angle of incidence = to the angle of reflection
Answer:
The answer is C:
Rays will follow the law of reflection, so the angle of reflection will be 35°.
Explanation:
Why is the milky way galaxy not expanding together with the rest of the universe?.
Answer:
Local gravity dominates over the expansion of the universe.
Explanation:
(The expansion of the universe is a relatively weak force acting throughout the universe).
what is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other?
I understand your question and E=0.0693J is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other.
What is magnetic field?The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field.Solution:to find the energy do as follows.
E=K 1 +K 2=0.5mv 12 +0.5mv 22 =0.5m(v 12+v 22 )
E=0.5(1.1)(0.323^2+(-0.147)^2)=0.0693J.E=0.5(1.1)(0.3232 +(−0.147)2)
E=0.0693J.
Hence, E=0.0693J is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other.
To know more about magnetic field visit
https://brainly.com/question/11514007
#SPJ4
The complete question is ;
10-kg carts on a low-friction track are rigged with magnets so that the carts repel each other when they approach each other. One cart has an initial velocity of +0.323 m/s, and the other has an initial velocity of -0.147 m/s.
What is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other?
what is the spring constant of a spring that stores 25 j of elastic potential energy when compressed by 7.5 cm?
Answer:
8. 9×10³N/m
Explanation:
k=2U /x²
= 2(25J) / 0.075m²
=8. 9×10³N/m
A group of students prepare for a robotic competition and build a robot that can launch large spheres of mass M in the horizontal direction with variable speed and from a variable vertical position and a fixed horizontal position x=0.
The robot is calibrated by adjusting the speed at which the sphere is launched and the height of the robot’s sphere launcher. Depending on where the spheres land on the ground, students earn points based on the accuracy of the robot. The robot is calibrated so that when the spheres are launched from a vertical position y=H and speed v0, they consistently land on the ground on a target that is at a position x=D. Positive directions for vector quantities are indicated in the figure.
When the students arrive at the competition, it is determined that the height of the sphere launcher can no longer be adjusted due to a mechanical malfunction. Therefore, the spheres must be launched at a vertical position of y=H2. However, the spheres may be launched at speed v0 or 2v0.
Question: In a clear response that may also contain diagrams and/or equations, describe which speed, v0 or 2v0, the students should launch the sphere at so that they earn the maximum number of points in the competition.
Free fall motion is motion in which the only force acting on the body is gravity.
What is free fall motion?A free-falling object is one that moves only due to the effect of gravity, and its motion is defined by Newton's second law of motion. We can use algebra to calculate the acceleration of a free-falling particle.
The student should launch the sphere at 2v₀, for the sphere will land at approximately 1.41D, which is in the 3 point zone
The given parameter are;
The distance covered by the sphere when launched at height, H = D
The velocity with which the ball reaches D = v₀
The current available height of launcher= H/2
The available velocities = v₀, and 2v₀
Now,
From H = ut + (1/2)gt², where, initial velocity of the vertical motion of the ball, u = 0
we know;
H = (1/2)gt²
Therefore, the time it takes the ball to drop from H, t = √(2H/g)
The distance, D = v₀ × √(2H/g)
When the height is H/2, we get;
t = √(2H/(2g)) = √(H/g)
Thus, the distance covered, D₁ = v₀ × √(H/g)
Therefore, D = (√2) × v₀ × √(H/g) = (√(2))D₁
Now, D₁ = D/(√2) ≈ 0.71D
D₁ ≈ 0.71D
At speed 2v₀, we have;
D₂ = 2v₀ × √(H/g) = √2 × v2 × v₀ × √(H/g) = √2 × v₀ × √(2H/g) = √2D₁ ≈ 1.41D
D₂ ≈ 1.41D
The 2 point zone = D/2 < x < D = 0.5D < x < D (Position D₁ ≈ 0.71D is located here)
The 3 Point Zone = D < x < 3D/2 = D < x < 1.5D (Position D₂ ≈ 1.41D is located here)
Given that at D₂, the ball lands in the 3 Point Zone, the student should launch the sphere at the speed, 2v₀, so that the ball will land at D₂ ≈ 1.41D, which is in the 3 Point Zone
To know more about free fall motion refer to:
brainly.com/question/17842118
#SPJ1
The complete question is as follows:
A group of students prepare for a robotic competition and build a robot that can launch large spheres of mass M in the horizontal direction with variable speed and from a variable vertical position and a fixed horizontal position x=0.
The robot is calibrated by adjusting the speed at which the sphere is launched and the height of the robot’s sphere launcher. Depending on where the spheres land on the ground, students earn points based on the accuracy of the robot. The robot is calibrated so that when the spheres are launched from a vertical position y=H and speed v0, they consistently land on the ground on a target that is at a position x=D. Positive directions for vector quantities are indicated in the figure.
When the students arrive at the competition, it is determined that the height of the sphere launcher can no longer be adjusted due to a mechanical malfunction. Therefore, the spheres must be launched at a vertical position of y=H2. However, the spheres may be launched at speed v0 or 2v0.
Question: In a clear response that may also contain diagrams and/or equations, describe which speed, v0 or 2v0, the students should launch the sphere at so that they earn the maximum number of points in the competition.
During practice, a student kicks a 0.40 kg soccer ball with a velocity of 8.5 m/s to the right into a 0.15 kg stationary bucket
lying on its side. The bucket travels with the ball after the collision. What is the velocity of the bucket and ball?
Answer:
Below
Explanation:
Using conservation of momentum
m1v1 = m2v2
.4 (8.5) = (.40 + .15) v^2
6.18 m/s
question how does the gravitational field gx at the surface of planet x compare with the gravitational field gy at the surface of planet y?
The gravitational field gx at the surface of planet x (M/m)(r/R)² times the gravitational field gy at the surface of planet y.
What is gravitational field?A gravitational field, as defined by physics, is the influence a massive body has on the area surrounding it, exerting a force on another huge body. In other words, a gravitational field, which is measured in newtons per kilograms (N/kg), aids in the explanation of gravitational field.
Now, Let planet x has mass M and radius R: then gravitational field at the surface of planet: gₓ = GM/R².
Let planet y has mass m and radius r: then gravitational field at the surface of planet: [tex]g_y[/tex] = Gm/r².
Hence, gₓ/[tex]g_y[/tex] = (M/m)(r/R)².
So, the gravitational field gx at the surface of planet x (M/m)(r/R)² times the gravitational field gy at the surface of planet y.
Learn more about gravitational field here:
https://brainly.com/question/12324569
#SPJ1
Most substances do what as temperature increases
Most substances expands when temperature increases.
What happens to substances as temperature increases?At low temperatures, most substances are solids. When the temperature rises, it becomes a liquid. At higher temperatures it becomes gaseous. The process by which a solid becomes a liquid is called melting (an old term you sometimes come across is fusion).
Thermal energy is added to a material during heating. As a result, its particles accelerate and its temperature rises. The loss of thermal energy that occurs during cooling results in a decrease in temperature and slower particle motion in the cooled material. When a substance's temperature rises, its molecules expand because they have more energy and are moving faster and further apart. When a material is heated, the molecules absorb energy. The inter-molecular connections between molecules are first disrupted.
So, most substances expands when temperature increases.
To know more about temperature refer to:
https://brainly.com/question/1156488
#SPJ1
The complete question is as follows:
What most substances do as temperature increases?
190) a small car and an suv are at a stoplight. the car has a mass equal to half that of the suv, and the 190) suv's engine can produce a maximum force equal to twice that of the car. when the light turns green, both drivers floor it at the same time. which vehicle pulls ahead of the other vehicle after a few seconds?
Given the
Half the weight of an SUV
If the mass of the SUV is 2m, the mass of the car is m
An SUV can produce twice as much power as a car, or 2 F.
Experience acceleration in an SUV
;SUV=2F/2m
;SUV=F/m
car acceleration
; car = F/m
They both start with an initial velocity of zero, so after a few seconds they have the same velocity and share the same position.
speed-
Velocity is a vector representation of the displacement an object or particle experiences with respect to time. The standard unit for velocity magnitude (also called velocity) is meters per second (m/s). Alternatively, centimeters per second (cm/s) can be used to express velocity magnitude. The direction of the velocity vector can be expressed in different ways depending on the number of dimensions involved. speed
to know more about speed visit
https://brainly.com/question/15686038
#SPJ4
Question 58
Which of the following numbers correctly express "thirty two micro meter" in scientific notation?
3.2 x 10-7 m
3.2 x 10-6 m
C) 3.2 x 10.⁹ m
3.2 x 10-8 m
3.2 x 10-5 m
In scientific notation "thirty two micro meter" can be expressed as 3.2 x 10^-5 m.
What is a micrometer?Micrometer, often known as micron, is a unit of length in the metric system equal to 0.001 mm, or roughly 0.000039 inch. m is its symbol.
The micrometer is frequently used to gauge the size of small items like colloidal particles and bacteria. Micrometers are also used to describe extremely small distances, like the infrared radiation's wavelengths.
So, 1 micrometer = 10^-6 meter.
∴ thirty two micrometer = 32 × 10^-6 meter = 3.2 × 10^-5 meter.
Hence, in scientific notation "thirty two micro meter" can be expressed as 3.2 x 10^-5 m.
Learn more about micrometer here:
https://brainly.com/question/2176082
#SPJ1
how will the image change if you move the lens closer or further from the lightbulb? how will you have to move the paper to keep the lightbulb in focus?
The image will still get progressively smaller as we pull the object more and more away. The focal point will draw the image's location ever-closer.
What is the name for a focal point?The focal point or point of focus on the axis of the a lens or mirror where parallel light rays converge or appear to split after refraction or reflection.
How is a focal point created?Contrast can be used by an artist to establish focal points in the following methods: 1) Value—A focus point will naturally develop in the area where there is the greatest disparity between light and dark. 2) Form—If a composition of geometric squares added a circle, the circle would be composition's main point.
To know more about focal point visit:
https://brainly.com/question/16188698
#SPJ4
Astrology, that unlikely and vague pseudoscience, makes much of the position of the planets at the moment of one's birth. The only known force a planet exerts on Earth is gravitational.
(a) Calculate the magnitude of the gravitational force exerted on a 4.20 kg baby by a 100 kg father 0.200 m away at birth (he is assisting, so he is close to the child).
(b) Calculate the magnitude of the force on the baby due to Jupiter if it is at its closest distance to Earth, some 6.29×10^11 m away. How does the force of Jupiter on the baby compare to the force of the father on the baby?
Other objects in the room and the hospital building also exert similar gravitational forces. (Of course, there could be an unknown force acting, but scientists first need to be convinced that there is even an effect, much less that an unknown force causes it.)
The magnitude of the gravitational force is 7×10⁻⁷ N
Baby weighs (m₁) 4.20 kg.
Father weighs (m₂) 100 Kg.
The gravitational force (F) between the body and the earth has a magnitude of 6.67×10⁻
The separation between them is: 0.200 m
The gravitational constant is
F=Gm₁×m₂÷ R²
F= 6.67×10⁻¹¹×4.20×100÷ (0.200)²
F= 7×10⁻⁷ N
Gravitational force: The gravitational force between any two mass-containing objects causes them to be drawn together. The gravitational force is said to as attractive because it continually seeks to unite masses rather than to drive them away. In truth, you and everything else in the universe are being pulled in different directions. It is referred to as Newton's Universal Law of Gravitation.
To know more about force visit this:
https://brainly.com/question/13191643
#SPJ4
Consider two stars that we’ll call A and B. Both are the same distance from Earth. Star A is much smaller than star B, but it also has a much higher temperature. Which one do you think would appear brighter? Why?
Both stars A and B will have the same brightness to the earth because luminosity is dependent on the temperature and size where A is hotter but smaller and B is bigger but colder.
What makes a star brighter?There are several factors that determine the luminosity of a star namely, the size, temperature, distance and magnitude. The two main factors that determine luminosity of a star when the distance is the same are temperature and size.
When the temperature of a Star is higher than the other with equal distance from the earth the star is brighter than that with lower temperature. Also, when the size of a star is bigger, it possesses a higher surface area to absorb light and energy. This makes A and B as bright as the other.
Learn more on luminosity here: https://brainly.com/question/28332746
#SPJ1
What is tbe change in gravitational potential energy of the apple if it falls the amount shown
Answer: 1.72J
Explanation:
hope this helps :)
a toroidal inductor with an inductance of 91.0 mh encloses a volume of 0.0200 m3. if the average energy density in the toroid is 55.0 j/m3, what is the current through the inductor?
When a toroidal inductor with an inductance of 91.0 mh encloses a volume of 0.02m^3 then the current through the inductor is calculated as 4.91 A.
What is inductance?The tendency of an electrical conductor to oppose change in the electric current flowing through it is called inductance.
As we know, the magnetic energy stored in the toroid is;
U = 1/2 * L i²
Here, L -- inductance and i -- current
Average energy density, u = B²/2μ
U = u V
Here V is volume, = 0.02 m^3
Given L = 91.0 mH; u= 55.0 j/m3 and V= 0.02 m^3
i = √2u V/L
= √ 2* 55 * 0.02 /91 *10^-3
Current, i = 4.91 A
To know more about inductance, refer
https://brainly.com/question/7138348
#SPJ4
if 5ev of energy is supplied to an electron with a binding energy of 2.3ev, with what kinetic energy will the electron be launched?
if 5ev of energy is supplied to an electron with a binding energy of 2.3ev, with what kinetic energy is [tex]\Rightarrow \mathrm{KE}=5-2.3=\mathbf{2 . 7} \mathrm{eV}[/tex]
What is kinetic energy?
The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Photoelectric effect: The photoelectric effect is a phenomenon where electrons are ejected from a metal surface when the light of sufficient frequency is incident on it. These ejected electrons are called photoelectrons.
- When a photon falls on the metal surface, the photon's energy is transferred to the electron.
- Some part of the energy gets utilized in removing the electron from the metal surface, and the remaining goes into giving kinetic energy for the ejected electron.
- Work function [tex](\phi)[/tex]: It is the minimum amount of energy required to cause photo-emission of electrons from a metal surface when light is incident on it.
- Einstein's Photoelectric Equation gives the relationship between work function[tex](\phi)[/tex], the kinetic energy of the emitted electron, and the energy of the photon [tex](E)[/tex]
[tex]$$E=\phi+K E$$[/tex]
Given that:
Energy of incident light, [tex]E=5 \mathrm{eV}[/tex]
Work function,[tex]$\phi=2.3 \mathrm{eV}$[/tex]
Using Einstein's Photoelectric Equation,
[tex]$$\begin{aligned}& \mathrm{E}=\phi+\mathrm{KE} \\& 5=2.3+\mathrm{KE} \\& \Rightarrow \mathrm{KE}=5-2.3=\mathbf{2 . 7} \mathrm{eV}\end{aligned}$$[/tex]
To learn more about kinetic energy visit
https://brainly.com/question/26472013
#SPJ4
explain why you cannot feel the force of gravitation between all objects
Answer:
Even your pencil and a piece of paper attract one another. You can't feel this force because the masses of the pencil and paper are so small. Even you exert a gravitational force on other objects. Because your mass is so much less than the mass of the Earth, you can't feel your gravitational force.
In simple word gravitational force is directly proportional to weight of and objects and indirectly proportional to distance.
F=G(m1 x m2) /r^2
F = force
G = gravitational constant
m_1 = mass of object 1
m_2 = mass of object 2
r = distance between centers of the masses
Max is moving boxes in his house from one room to another. Max has
two different floor surfaces in his house, one carpeted and the other wood
floor. What can you correctly conclude about moving the boxes in Max's
house?
A.The boxes will slide more easily on the carpeted floor due to lower friction.
B.The boxes will slide more easily on the wood floor due to higher friction.
C. The boxes will slide more easily on the wood floor due to lower friction
D.The boxes will slide more easily on the carpeted floor due to higher friction.
The conclusion about moving the boxes in Max's house is as follows: The boxes will slide more easily on the carpeted floor due to lower friction (option A).
What is friction?Friction is the force that resists the relative motion or tendency to such motion of two bodies in contact.
According to this question, Max is moving boxes in his house from one room to another. Max has two different floor surfaces in his house, one carpeted and the other wood floor.
The carpeted floor will have a lesser friction than the wooden floor when moving the object. This makes it easier to move the boxes on the carpeted floor.
Therefore, option A is correct.
Learn more about friction at: https://brainly.com/question/13000653
#SPJ1
if the frequency is doubled to 80 khz and the current is kept the same, what will be the peak out-of-phase voltage?
The peak out of phase voltage also becomes doubled with increase in frequency .
The frequency of the incident light must exceed a particular frequency a for photoemission to occur cut-off frequency .No matter how bright the light is, photoemission would not occur if the frequency were lower than that. If the initial frequency is assumed to be higher than the cut-off frequency, doubling the frequency will also result in photoemission and non-zero photocurrent.The intensity, on the other hand, is a measurement of the quantity of incident photons per second per unit area. If the frequency is greater than the cut-off frequency, which we have already assumed, then doubling its value will also double the probability of collision with atoms. Frequency=80KHz with current constant makes no effect due to independent factor of intensity.To study more about probability of collision -
https://brainly.com/question/13056041
#SPJ4
an electron travels with velocity in a region where the magnetic field is t. what is the force on the electron?
An electron experiences a force of constant magnitude that is always pointed perpendicular to its velocity since the force is F=qvB in a constant magnetic field. The electron will move in a circular orbit.
What is a Magnetic field?Magnetic fields surround permanent magnets and current-carrying conductors because of the movement of electrical charge.
What is an Electron?A negatively charged subatomic particle known as an electron can either be free or attached to an atom. One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together.
Hence, an electron experiences a force of constant magnitude that is always pointed perpendicular to its velocity since the force is F=qvB in a constant magnetic field. The electron will move in a circular orbit.
To know more about magnetic fields, check out:
https://brainly.com/question/14411049
#SPJ4
Do you think it is harder for architects (people who design buildings) to protect structures against internal or external forces? Why?
Gravity is the attraction that things have for one another, like the powerful pull that the Earth has on the things that are on it.The "pull-apart" force is tension.The "push-together" force is compression.
Why are external factors significant?Because they can have both direct and indirect influence on business operations, employees, and revenue, external environment considerations are significant.
What external forces are at work on the building?The environment outside usually exerts external stresses on the structure.The building is subjected to external loads from dead, living things, snow, wind, and earthquakes.In the majority of cases, it is simple to identify the source of the these external demands.
To know more about internal or external forces visit:
https://brainly.com/question/9587173
#SPJ1
A skateboarder travelling at 9.5 m/s starts to travel up the side of a half pipe. Calculate the maximun height the skateboarder can reach.
The maximum height the skateboard can reach is is 4.6 m.
What is height?Height is the vertical distance between two points.
To calculate the maximum height the skateboard can reach, we use the formula below.
Formula:
h = v²/2g......................... Equation 1Where:
h = Maximum heightv = Velocityg = acceleration due to gravityFrom the question,
Given:
v = 9.5 m/sg = 9.8 m/s²Substitute these values into equation 1
h = (9.5²)/(9.8×2)h = 4.6 mHence, the maximum height is 4.6 m.
Learn more about height here: https://brainly.com/question/983412
#SPJ1
what is the difference between speed and velocity? what is the difference between speed and velocity? velocity contains information about the direction of motion while speed does not. speed is an average quantity while velocity is not. the concept of speed applies only to objects that are neither speeding up nor slowing down, while velocity applies to every kind of motion. speed is measured in mph, while velocity is measured in m/s.
Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.
In other terms, the distance that an object travels in a unit of time is referred to as its speed. It merely takes into account the magnitude of the object and ignores its orientation. Speed is referred to as a scalar quantity. When referring to velocity, however, it is said that velocity is the rate at which displacement changes. It is a vector quantity. Speed is a scalar measure of "how quickly an object is moving." The rate at which an object travels a distance can be thought of as its speed. A fast-moving object travels at a high speed and completes a significant distance relatively quickly. A slow-moving object with a low speed, on the other hand, travels a relatively little distance in the same length of time. Zero speed refers to an object that is not moving at all. When evaluating the velocity of an item, one must retain track of direction. It wouldn't be sufficient to merely state that something moves at 80 km/h. To fully define an object's velocity, direction information must be included. For instance, 80 km/h reflects the speed of a car travelling along a road, while 80 km/h east shows the speed of the car.
To know more about speed, visit to
https://brainly.com/question/13943409
#SPJ4
Give an example of a sport where shoes with a high coefficient of friction would be advantageous.
An example of sport where shoes with a high coefficient of friction would be advantageous : rugby. This is played in deep mud and needs a high level of friction so they don't slip, so boots for this condition are big.
Why shoes of rugby players shoes have high coefficient of friction?Rugby players play in deep mud so they need a high level of friction so that they do not slip and fall. Therefore, boots for this condition are also big and rounded studs so they stick and sink into the ground and give grip.
In sports, high friction avoids slipping and permits grip of a surface better. This permits faster movements but, if the friction is excessive, overload is produced in joints and injuries may occur.
To know more about coefficient of friction, refer
https://brainly.com/question/14121363
#SPJ1
PLEASEEEE HELPPP WORTH 100 POINTS!!
Answer:
it is a heterogeneous mixture
Explanation:
because it ha s a smooth consistancy and not a thick one.
A particle is moving along the x axis such that its position is given by x² =3t²-16t+8. What are the velocity and acceleration of the particle at t = 4s? At what time is the particle stationary?
Answer:
Below
Explanation:
Usually, position is given by x(t) =.......
if x^2 = 3t^2 - 16t+ 8 then
x = ( 3t^2 - 16t + 8)^1/2 ( I do not think this is what you want....but it IS what was posted)
Velocity will be given by the derivative : (3t-8) / ( 3t^2-16t+ 8)^1/2
at t = 4 this equals an imaginary number....
so I think your question equation is incorrect
The answer above this one used x(t) = 3t^2-16t+8 as the position function and is likely the correct way to do it
then velocity = dx/dt = 6t-16 at t = 4 this is 8
the particle is stationary when this = 0 at t = 16/6 = 2.67 s (NOT 4s as posted in the other 'verified' answer !!!!!)
Acceleration = dv/dt = 6
at t= 4 the velocity would be 8 units/s
and the accel would be 6 units/s^2
and when v= 0 would occur at t = 2.67 s
what should have happened to the grand unified force as the universe expanded and cooled at an age about
Grand unified force thermodynamically isolated its internal energy as the universe expanded and cooled at an age about.
The universe's evolution has been split into eras by cosmologists and astronomers.The Planck Era was followed by the Grand Unified Theory Era, which is the third stage of the evolution of the universe.Every era saw significant changes, so it is crucial to investigate what transpired there.Between 10-43 seconds and 10-35 seconds, the Grand Unified Theory Era took place. Such a brief period of time. This brief period of time is hard to imagine.Light has not yet been created in this era. Because of certain circumstances, such as high temperature and high pressure, particles and molecules still cannot bind.To learn about universe's evolution-
https://brainly.com/question/19079287
#SPJ4
what is the resonance frequency if the capacitor value is doubled and, at the same time, the inductor value is halved?
The resonance frequency will remain the same if the capacitor value is doubled and, at the same time, the inductor value is halved.
The resonant frequency is a term used to describe the oscillation of a system at its natural or unforced resonance.
In an LC circuit, the resonance frequency can be determined by the following equation;
ω = 1 / √LC
Here L represents the inductor value and C illustrates the value of the capacitance.
If the capacitance is doubled, C'=2C, and the inductance is halved, L'=L/2, then;
ω = 1 / √L'C'
ω = 1 / √(L/2) × (2C) = 1 / √LC = ω
Therefore the frequency of resonance is equal to the original value.
To learn more about resonance frequency; click here:
https://brainly.com/question/13040523
#SPJ4
a car with the windows rolled down is traveling north on a road at a speed of 23.0 m/s. a police car, traveling south at a speed of 38.0 m/s, approaches with its siren producing sound at a frequency of 2400 hz. (enter your answers in hz. assume that the speed of sound in air is 343 m/s.) (a) what frequency does the driver of the car observe as the police car approaches? (enter your answer to the nearest integer.) hz (b) what frequency does the driver of the car detect after the police car passes her? hz (c) repeat parts (a) and (b) for the case when the police car is traveling northbound. while police car overtakes hz after police car passes hz
a) The frequency that the driver of the car observes as the police car approaches is calculated by using the Doppler effect.
The frequency of the sound wave is increased as the source of the sound (the police car) approaches the observer (the driver of the car). The frequency observed by the driver of the car is given by:
f_observed = f_source * (v_source + v_observer) / (v_source - v_observer)
Substituting the given values, we get:
f_observed = 2400 * (38 + 23) / (38 - 23) = 4860 Hz (to the nearest integer).
b) The frequency of the sound wave is decreased as the source of the sound (the police car) moves away from the observer (the driver of the car). The frequency observed by the driver of the car is given by:
f_observed = f_source * (v_source - v_observer) / (v_source + v_observer)
Substituting the given values, we get:
f_observed = 2400 * (38 - 23) / (38 + 23) = 1380 Hz (to the nearest integer).
c)The frequency of the sound wave is decreased as the source of the sound (the police car) approaches the observer (the driver of the car). The frequency observed by the driver of the car is given by:
f_observed = f_source * (v_source - v_observer) / (v_source + v_observer)
Substituting the given values, we get:
f_observed = 2400 * (38 - 23) / (38 + 23) = 1380 Hz (to the nearest integer).
The frequency of the sound wave is increased as the source of the sound (the police car) moves away from the observer (the driver of the car). The frequency observed by the driver of the car is given by:
f_observed = f_source * (v_source + v_observer) / (v_source - v_observer)
Substituting the given values, we get:
f_observed = 2400 * (38 + 23) / (38 - 23) = 4860 Hz (to the nearest integer).
For more questions like Doppler effect click the link below:
https://brainly.com/question/21408768
#SPJ4