a block of mass m=9.0kg and speed V and is behind a block of mass M=27 kg and speed of 0.50m/s, as shown in the figure. the surface is fricitonless, and the blocks suddenly collide and couple. after the collision, the blocks have a common speed of 0.90 m/s. how much kinetic energy of the blocks is lost due to the collision?

The system acceleration for the pulley having masses m1 = 0.7 kg and m2 = 0.4 kg  Is 35.93 [tex]m/s^2[/tex].

Newton's second law provides a detailed explanation of how a force can alter a body's motion. It is believed that a body's momentum varies over time at a rate equal to the force acting on it in both direction and amplitude. The combined effects of a body's mass and velocity determine its momentum.

Given:

The mass, m₁ = 0.7 kg,

m₂ = 0.4 kg,

Calculate the system acceleration by the following formula,

a = g(m1 − m2)/(m1 + m2)

Here a is the acceleration.

Substitute the values,

a = 9.8 * (0.7 - 0.4 ) / (0.7 + 0.4)

a = 35.93 [tex]m/s^2[/tex]

Therefore, the system acceleration for the pulley is 35.93 [tex]m/s^2[/tex].

To know more about Newton's Second Law:

https://brainly.com/question/13447525

#SPJ1

The acceleration of the car is 57.04 [tex]m/s^{2}[/tex]

It is given that a sports car accelerates from rest to 103 km/h in 6.5 s.

So, Initial velocity (u) = 0 m/s   { since the car starts from rest }

Final velocity (v) = 103 km/hr = 103 * 18/5 m/s = 370.8 m/s

Now, the time taken (t) = 6.5 seconds.

Acceleration is the measure of how fast the object's velocity changes with respect to time.

Now, Acceleration (a) = Change in velocity/Time taken

So,

[tex]a = \frac{v -u}{t}[/tex]

Putting all the values, we get

[tex]a = \frac{370.8 - 0}{6.5} =\frac{370.8}{6.5} = 57.04[/tex]

Hence, the acceleration of the car is 57.04 [tex]m/s^{2}[/tex]

To read more about acceleration, visit https://brainly.com/question/12550364

#SPJ1

Mechanical wave is a kind of wave is a wave on the electromagnetic spectrum.

Electromagnetic (EM) waves are cross waves. Their vibrations or oscillations are swapped in electrical and magnetic fields at right angles to the direction of wave travel. The radiation is explained by the amount of energy found in the photons. Radio waves have photons with low energies, and microwave photons ..Electromagnetic waves with smaller wavelengths and higher frequencies include ultraviolet light, X-rays, and gamma rays. Electromagnetic waves with longer kinds of Electromagnetic Waves. Radio Waves have the longest wavelengths of all electromagnetic waves.

So we can conclude that the different types of waves are mechanical and electromagnetic waves. Mechanical waves are divided into transverse and longitudinal waves.

Learn more about electromagnetic here: https://brainly.com/question/25847009

#SPJ1

The force that Superman must exert is -1.33 * 10⁶ N

The force that must be exerted by Superman is 37.6 % of the weight of the train.

The force the train exerts on superman is 1.33 * 10⁶ N

The average acceleration of the train is determined from the equation of motion as follows:

v² = u² + 2as

where

v is final velocity = 0 m/s

u is initial velocity = 120 km/h

To convert km/h to m/s, we multiply km/h by 1000/3600

u = 120 * 1000/3600

u = 33.3 m/s

a = ?

s = 150 m

a = v² - u² / 2s

a = 0 - 33.3² / 2 * 150

a = 3.696 m/s²

Force that must be exerted will be:

Force = 3.6 × 10⁵ * 3.696 m/s²

Force = -1.33 * 10⁶ N

b. Weight of train =  3.6 × 10⁵ * 9.81

Weight of train = 3.53 * 10⁶ N

The ratio of the force and the weight of the train = (-1.33 * 10⁶ / 3.53 * 10⁶) * 100%

The ratio of the force and the weight of the train = 37.6%

Learn more about force and acceleration at: https://brainly.com/question/14343220

#SPJ1

Answer:

Explanation:

Given:

F = Fₓ·i + Fy·j

S = Sₓ·i + Sy·j

Fₓ = 3 N

Fy = - 2 N

Sₓ = 5 m

Sy = 2 m

_________

A - ?   - Work

α - ? - Angle

F = 3·i - 2·j

S = 5·i + 2·j

The work is numerically equal to the scalar product of the displacement force

A = (F·S) = 3·5 + (-2)·2 = 15 - 4 = 11 J

Modules:

| F | = √ (3² + (-2)² ) = √ (9 + 4) = √ 13

| S | = √ (5² + 2² ) = √ (25 + 4) = √ 29

Angle:

cos α = (F·S) / ( |F| · |S| ) = 11 / ( √13 · √29) ≈ 0,5665

α ≈ 55.5°

The gravitational potential energy change during this climb is 83,790 J.

The change in the gravitational potential energy of the bike racer is calculated as follows;

ΔP.E = mgh

where;

The vertical height of the road is calculated as follows;

h = L sinθ

where;

h = 1500 x sin(4.3)

h = 112.5 m

ΔP.E = 76 x 9.8 x 112.5

ΔP.E = 83,790 J

Learn more about change in potential energy here: https://brainly.com/question/4836293

#SPJ1

Answer:

A

Explanation:

A constant velocity means the position graph has a constant slope. It's a straight line sloping up.

When an object transported from earth to the moon, its mass remains same but weight becomes 1/6th that on earth..

In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter.

It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has.

The amount of a body's weight indicates how much gravity is pulling on it. Weight is calculated using the method w = mg. Since weight is a force, it has the same SI unit as a force, which is the Newton (N).

So, mass of an object is intrinsic property of the object - it remains same in earth and in moon. But weight is the amount of gravitational  attraction force. Moon has nearly 1/6th gravitational attraction field. So, the weight of the object on moon will be 1/6th that on earth.

Learn more about weight here:

https://brainly.com/question/23312072

#SPJ1

So, this is the diagram of the described situation, the strings are attached to a rigid support at their one end and the other end is connected to the particle.

Let, the string making an angle of 45 with the horizontal has a tension of T 1 and

the one making an angle of 30 has a tension of T2.

Now,

what we have done is that we have taken the vertical and

horizontal components of the tension in the two strings.

Now,considering the system to be in equilibrium,

see the diagram,the vertical component of the strings i.e

(T 1 sin 45 & T 2 sin 30) together will act to balance the weight of

the particle(mg)

So,we can say, T 1 sin 45 + T 2 sin 30 = mg. ...(1)

From horizontal equilibrium,we can say, T 1 cos 45 must balance T 2 cos 30 ,

as no other force is present in horizontal direction.

So,T 1 cos 45 = T 2 cos 30. ...(2)

Given,

mg = 10 ⋅ 10 = 100N

So, solving equation 1 & 2 we get,

T 1 = 89.65N and, T 2 = 73.20N

The buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex]  And 10.0 cm on each side is 7.644 Newton.

The density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.

As an illustration, the density of Earth is 5.51 grams per cubic centimeter, whereas the density of water is 1 gram per cubic centimeter.

Given:

The density of wood, ρ = 0.780 g/[tex]cm^3[/tex],

The Side of wood, a = 10 cm,

Calculate the buoyant force by the following formula,

F = - ρ * g * V,

Here, F is the buoyant force.

Substitute the values,

F = - 0.780 * 9.8 * [tex]10^3[/tex] * [tex]10^{-3}[/tex]

F = 7.644 Newton

Therefore, the buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex] is 10.0 cm on each side is 7.644 Newton.

To know more about Density:

https://brainly.com/question/6329108

#SPJ1

The rubber band travels horizontally 7.0 cm in second time.

Given parameters:

the rubber band is stretched = 2.0 cm.

And, the rubber band travels = 3.5 cm.

Secondly,  the rubber band is stretched = 4.0 cm.

As force is directly proportional with stretching and landing at a horizontal distance,  it travels horizontally in second time

= 4.0 cm x 3.5 cm/ 2.0 cm.

= 7.0 cm.

The vertical movement can't be measured as a new gravitational force comes in play in this case.

Learn more about stretching here:

https://brainly.com/question/1171877

#SPJ1

Answer:

120

Explanation:

because it is horizontal

An object of mass 3.0 kg starts from rest and moves along the x-axis. A net horizontal force is applied to the object in the +x direction. The Force-time graph is shown below. The net impulse delivered by the applied force is 102 joule.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Force is used to describe a body's tendency to modify or change its state as a result of an external cause. When force is applied, the body can also alter its size, shape, and direction. kicking a ball, pushing and pulling on the door, or kneading dough are a few examples.

We know the Impulse = Area of the Graph

= ( 6 × 4) + 0.5 × 2 × 6

= 30 sec

For First 4 sec

Acceleration = 6 ÷ 3

= 2 m/sec²

S = 0.5 × 2 × 4²

= 16 m

Therefore, work Done = 6 × 16

= 96 J

Then, Average force

= ( 6 - 0 ) ÷ 2

= 3 N

Acceleration = 1 m/sec²

S = 0.5 × 1 × 2²

= 2 m

Work = 3 × 2

= 6 J

Total Work = 96 + 6

= 102 J

Thus, The net impulse delivered by the applied force is 102 joule.

To learn more about force, follow the link;

https://brainly.com/question/13191643

#SPJ2

Answer:

Explanation:

m₀ = 100 g

m = 6.25 g

T = 33 s

_____________

t - ?

Radioactive decay constant:

λ = ln 2 / T = 0.693 / 33  ≈ 0.021 s⁻¹

Law of radioactive decay:

[tex]m=m_{0} e^{-\lambda t} \\[/tex]

[tex]e^{-\lambda t} = \frac{m}{m_0} \\[/tex]

[tex]ln (e^{-\lambda t}) = ln(\frac{m}{m_0} ) \\[/tex]

[tex]-\lambda t = ln (\frac{m}{m_0})[/tex]

[tex]t = -\frac{ln(\frac{m}{m_0}) }{\lambda}[/tex]

t = - ln (6.25/100) / 0.021 ≈ 132 s

You are travelling towards the back of the bus. If your walking speed is slower than the speed of the moving bus (which it generally is), your motion relative to a point on the ground will be travelling in the same direction as the moving bus, but at a slower rate.

What is speed?

Speed can be defined as the distance travelled by an object in relation to the time it takes to travel that distance. In other words, it measures how rapidly an object moves but does not provide direction. When we get direction with speed, we term it "velocity."

The SI unit system is most typically used to express speed. Speed is measured in metres per second, or m/s, because distance is measured in metres and time is recorded in seconds.

Speed is measured in metres per second (ms-1) and is symbolised by the letter "s."

The distance travelled is denoted by d and measured in meters (m).

The distance travelled per unit of time is referred to as speed. It is the rate at which an object moves. The magnitude of the velocity vector is represented by the scalar quantity speed. It lacks a sense of direction. A higher speed indicates that an object is travelling faster. Lower speed indicates that it is travelling more slowly. It has zero speed if it is not moving at all.

Learn more about speed from given link

https://brainly.com/question/13943409

#SPJ1

The answer is 70.6°

The maximum number of revolutions per minute the fan can run at before she will be flung off is  1,982.24 rev/min.

The maximum angular speed of the fan is calculated by applying the following kinematic equation.

From Newton's second law of motion,

F = ma

F = mv/t

F = m(ωr/t)

where;

ω/t = F/mr

ω/t = (0.0137 N) / (0.00022 kg x 0.3 m)

ω/t = 207.58 rad/s

ω/t = (207.58 rad/s)  x (1 rev / 2π rad) x  (60 s / min)

ω/t = 1,982.24 rev/min

Learn more about angular speed here: https://brainly.com/question/6860269

#SPJ1

The longer a wire is, the higher the resistance will be.

Neither length (L) nor cross-sectional area (A) influences Rh. It totally depends on the type of material used to make the wire. It is somewhat dependent on temperature variation, but this variation is negligible and is disregarded for most purposes.

Let Resistivity be Rh and Resistance be R.

L for the wire's length and A for its cross-section.

This formula relates to resistance.

R=Rh*L/A

Rh, L, and A are the three parameters that determine resistance.

The resistance increases as the wire lengthen.

Less resistance is there the larger the cross-sectional area. (Put A in the denominator; the numerator is L.)

Only take into account the Length variable. As was previously said, shorter wires have lower resistance and vice versa.

Learn more about resistance here:

https://brainly.com/question/17562635

#SPJ1

The short summary of the concept of dark matter and dark energy is given here.

An estimated 85% of the universe's mass is assumed to be made up of dark matter, a hypothetical type of stuff.  Because it does not appear to interact with the electromagnetic field—that is, it does not absorb, reflect, or emit electromagnetic radiation—dark matter is referred to as being "dark," making it challenging to detect.

Numerous astrophysical observations support the existence of dark matter, including gravitational effects that cannot be described by the gravity theories currently in use without the presence of more matter than can be observed. Because of this, the majority of scientists believe that dark matter is prevalent in the universe and has significantly influenced both its structure and evolution.

Dark energy is an undiscovered type of energy that has the largest effects on the cosmos according to physical cosmology and astronomy. Supernova observations provided the first direct proof for its existence by demonstrating that the cosmos is expanding faster than ever rather than at a fixed rate. It is necessary to understand the universe's origins and initial elements in order to comprehend its evolution.

Learn more about dark matter here:

https://brainly.com/question/29265929

#SPJ1

The current state of research offers some evidence that life events can cause changes in personality traits and that various life events may connect differently to various trait domains.

What is anecdote?

A brief narrative or account abou life events changet a person or event that is typically humorous, instructive, entertaining, or biographical in nature is known as an anecdote.

How do life events change your personality?

These ideas contend that because life events alter, interrupt, or reroute people's habits of thought, feeling, and action, they have long-lasting consequences on personality traits.

Hence is a changes in personality traits a correct answer.

To know more about  life events change follow the link.

https://brainly.com/question/12119018

#SPJ1

The features of Earth's orbit that concur with and conform to the pattern of Kepler's second law include the fact that Earth feels the largest gravitational pull when it is closest to the Sun.

According to Kepler's second rule, a planet moves in its ellipse so that a line drawn between it and the Sun and focused on it covers the same amount of space in the same amount of time.

The eccentricity of the Earth's orbit around the Sun, which is an ellipse, determines how far from a circle the orbit is (e). The perihelion, or point on the orbit that is closest to the Sun, and the apogee, or point most aphelion of the Sun.

To know more about Kepler's second law visit:-https://brainly.com/question/4216415

#SPJ1

The amount of work required to move the rock of mass 95 kg up a ramp of 100 m is 93100 J.

Work can be fined as the product of force and distance.

To calculate the amount of work required to get the rock up, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the amount of work required is 93100 J.

Learn more about work here: https://brainly.com/question/25923373

#SPJ1

Answer: C

Explanation:

5/4 m/s^{2} would be its new acceleration .

What is centrifugal acceleration ?

The simplest case of circular motion is uniform circular motion, where an object moves in a circular trajectory with constant velocity. Note that the linear velocity of an object in circular motion is constantly changing because, unlike velocity, it is constantly changing direction. From kinematics we know that acceleration is a change in velocity, either in magnitude or direction, or both. Therefore, an object in uniform circular motion will always be accelerated even if the magnitude of its velocity is constant. You can feel this acceleration every time you get in the car while cornering. Keeping the handle steady while turning and moving at a constant speed creates a smooth circular motion. What you will notice is a feeling of skidding (or skidding depending on speed) out of the center of the turn.

To learn more about centrifugal acceleration , click the link below ;

https://brainly.com/question/954979

#SPJ9

Answer: The most widely accepted method of determining the posted speed limit is to set the speed limit at what is called the “85th percentile speed”, which is the speed at or below which 85 percent of the traffic is moving.

Explanation:

Answer:

Explanation:

A = 6i - 4j + 8k

B = 2i + 4j - 14k

A + B = (6+2)i + (-4+4)j + (8-14)k

A + B = 8i +0j -6k

A + B = 8i - 6k

(1/2)(A + B) = 4i - 3k

d = √ (4² + 3²) = 5

e = (4/5)i -(3/4)j

The momentum of the sprinter of mass and velocity of 68 kg and 8 m/s respectively is  544 kgm/s

Momentum can be defined as the product of mass and velocity of a body.

To calculate the linear momentum of the sprinter, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitite the values into equation 1

Hence, the momentum of the sprinter is 544 kgm/s.

Learn more about momentum here: https://brainly.com/question/18798405

#SPJ1

The linear momentum of the sprinter with a mass of 68 kg that reaches a speed of 8 m/s during a race is 544kgm/s.

The momentum of a body in motion is the tendency of a body to maintain its inertial motion. It is the product of its mass and velocity, or the vector sum of the products of its masses and velocities.

The linear momentum of a body can be calculated as follows:

p = m × v

According to this question, a sprinter has a mass of 68kg and reaches a speed of 8 m/s during a race. The momentum can be calculated as follows:

p = 68kg × 8m/s

p = 544kgm/s

Therefore, 544kgm/s is the linear momentum of the sprinter.

Learn more about momentum at: https://brainly.com/question/27988315

#SPJ1

Answer:

Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.

Explanation:

Answer:

Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.

Explanation:

Answer:

0 J

Explanation:

KE = .5(m)(v2-v1)

if velocity is constant v2 = v1, then v2 - v1 = 0

therefore if (v2-v1) = 0, then KE must also be equal to 0

If the absolute temperature of an ideal diatomic gas is quadrupled, then, the average speed of molecules is doubled.

[tex][V_avg=\sqrt(8k *4T)/\pi m],[V_avg=2\sqrt(8kT) \pi m],[V_avg=2v_avg][/tex]

Speed (often abbreviated as "s") is a scalar variable that describes how much an object's location changes over time or how much it changes per unit of time. The average speed of an item in a period of time is the distance traveled by the object divided by the duration of the period.

Time divided by distance are the speed-related metrics.. The meter per second (m/s) is the SI unit of speed, while the kilometer per hour (kph) is the most often used unit of speed in daily life.

To know more about  speed visit : brainly.com/question/93357

#SPJ9