50g nitrous oxide combines with 50g oxygen form dinitrogen tetroxide according to the balanced equation below.
2N20 + 302 - 2N204

Answer:

0.174kg of Ore are required

Explanation:

The ore of 37.3% in nickel by mass means that in 100g of ore there are 37.3g of nickel. As we need to obtain 65g of nickel we can convert this mass to mass of ore using the conversion factor (100g Ore / 37.3g Nickel) as follows:

65g of nickel * (100g Ore / 37.3g Nickel) = 174g of Ore are needed to have 65.0g of nickel. In kilograms:

174g Ore * (1kg / 1000g) =

Answer: A chemical symbol is a one- or two-letter designation of an element. Compounds are combinations of two or more elements. A chemical formula is an expression that shows the elements in a compound and the relative proportions of those elements.

Answer:

Alkali metals are among the most reactive metals. This is due in part to their larger atomic radii and low ionization energies. They tend to donate their electrons in reactions and have an oxidation state of +1. ... All these characteristics can be attributed to these elements' large atomic radii and weak metallic bonding.

Explanation:Because they have just one valence electron, group 1 elements are very reactive. As a result, they are found in nature only in combination with other elements. Alkali metals are all solids at room temperature. ... From the top to the bottom of group 1, the elements have heavier, more reactive atoms.

hope it helped :)

Answer: Alloy

Explanation: gold is an alloy, or mixture of metals

Answer: The salinity of ocean water is 34 ppt.

Explanation:

Salinity is defined as the number of grams of salts present per kilogram of seawater. It is expressed in parts per thousand.

The formula used to calculate the salinity of ocean water or sea water is:

[tex]\text{ Parts per thousand}=\frac{\text{Mass of salts}}{\text{Mass of sea water}}\times 1000[/tex]

We are given:

Mass of salts = 17 g

Mass of sea water = 500 g

Putting values in above equation, we get:

[tex]\text{ Parts per thousand}=\frac{17g}{500g}\times 1000\\\\\text{ Parts per thousand}=34[/tex]

Hence, the salinity of ocean water is 34 ppt.

Answer:

The answer is 9.000090040048176

Answer:

Mass Pressure and density.

Explanation:

Answer: metal and salt water

Explanation: salt starts to brake down metal and metal is everywhere in the ocean hope this helps

Answer:

baking a cake.

Explanation:

baking a cake is an example of a chemical reaction that happens daily because a new substance is forming when the cake is being baked. hope this helps! :)

Answer:

a chemical change

Explanation:

lighting a match is a chemical change. chemical reactions cause chemical change. in a chemical reaction two or more substances, called the reactants, form different substances called products. hope this helped :)

Answer:

D

Explanation:

it's a star it has gas and makes it own light

Answer:

[tex]H_2(g)+O_2(g)\rightarrow H_2O_2(g)[/tex]

Explanation:

Hello!

In this case, since the formation reaction of a compound is undergone when the pure elements composing it are combined, for gaseous hydrogen peroxide, gaseous diatomic hydrogen and oxygen (standard state) must be combined in order to obtain the gaseous hydrogen peroxide as shown below:

[tex]H_2(g)+O_2(g)\rightarrow H_2O_2(g)[/tex]

Whereas it is proved there are two hydrogen and oxygen atoms at each side of the chemical equation and therefore it is balanced.

Best regards!

Answer:

Keep the world safe and clean

Explanation:

safety = keep people inline and help them from making bad decisions

clean = keep the world from being polluted or trashy

Astronomy deals with the study of celestial objects such as moon, stars, sun, planets, etc.

Safety is the art of being protected from danger

Recycling is the process of waste conversion. That is, useful materials are generated from wastes.

Astronomers, in their exploration of extraterrestrial bodies, need to ensure that proper measures are taken to ensure their safety in these locations. Unhealthy practices such as deforestation and indiscriminate waste disposal may cause environmental hazards such as global warming. This is a threat to the atmosphere.

Therefore, wastes have to be converted to reusable products to discourage indiscriminate disposals. Hence the importance of the terms "safety" and "recycling" in astronomy.

Learn more here: https://brainly.com/question/12393496

Answer:

hope this help

Explanation:

change: volume of solid , volume of liquid , the volume of gases

not change: the shape of solid , the shape of liquid , the shape of gases

The complete question is shown in the image attached

Answer:

See explanation

Explanation:

In a molecule, the direction of the dipole moment also shows the direction of the shift in electron density. Let me give you an instance. In HCl, the dipole points towards the chlorine atom. This implies that the bond is polar and the chlorine atom accommodates the greater share of the electron density of the H-Cl bond. The negative partial charge rests on the more electronegative atom (chlorine in this case) while the partial positive charge rests on the more electropositive atom(hydrogen in this case). Recall that the difference in electron density between the two atoms creates this polarity.

Having said that much, let me come to the issue of electronegativity and bond polarity. The polarity of bonds depends on the electronegativity difference between atoms. I have just established that the H-Cl bond is polar owing to the difference in electronegativity between hydrogen and chlorine. If I replace the chlorine atom in the molecule with another hydrogen atom, the molecule is no longer polar because the difference in electronegativity of a H-H bond is zero.

Lastly, let me talk about electronegativity difference and bond character. The magnitude of electronegativity difference between atoms determines the bond character. If the electronegativity difference between bonding atoms is;

less than 0.4, the bond is a pure covalent bond

between 0.4 - 1.8, the bond is a polar covalent bond

greater than 1.8, the bond is a pure ionic bond  

Answer:

62.9%

Explanation:

Step 1: Given data

Step 2: Calculate the mass lost of water

We will use the following expression.

mH₂O = mNa₂CO₃.xH₂O - mNa₂CO₃

mH₂O = 71.5 g - 26.5 g = 45.0 g

Step 3: Calculate the percent of water in the hydrate sodium carbonate

We will use the following expression.

%H₂O = mH₂O / mNa₂CO₃.xH₂O × 100%

%H₂O = 45.0 g / 71.5 g × 100%

%H₂O = 62.9%

Answer:

120.37 g/mol is the molar mass of magnesium sulfate

Answer:

Meiosis

Explanation:

They just split in four.

Answer:

Sulphur

Explanation

Rhombic and monoclinic sulphur are its allotropic forms

Answer:

The protons and electrons in each element are equal. The sulfur has 16 electrons and 16 protons. But the ionic atom's electron quantity changes depending on how many it has gained. 'S2-' has gained 2 electrons, which means it has now 18 electrons and 16 protons. 16 neutrons

Explanation:

Answer:

it causes the cells to become flaccid and the stomata openings to close

Explanation:

the stomata closes to reduce water loss

When a plant is losing water at a greater rate than it can be replaced by its roots, then in such a case, the stomata will get close to reduce the loss of water.  

• Generally, the opening of stomata takes place in the day and gets close at night. To prevent the loss of water stomata get close during the night.  

• However, in certain cases, even during the day, when the plant experiences loss of water due to conditions like drought then stomata remain close during the day also.  

• This opening and closing of stomata take place as a response to the signals from the external environment.

Therefore, when more amount of water is loosing from the plant than getting absorbed by the roots, the stomata gets the signal to remain close to prevent water loss and death of the plant.

To know more about stomata and water loss:

https://brainly.com/question/2611673

Answer:

In a direct democracy, which is also called pure democracy the decisions are not taken by representatives. All decisions are voted on by the people. When a budget or law needs to be passed, then the idea goes to the people. Large governments rarely make decisions this way

Explanation:

I don't think direct democracy works well unless the population is homogenous and agree on major issues

Explanation:

the average atomic mass of chlorine= (34.968 x 0.7553) + ( 36.956 x 0.2447) = 35.4545

Ca % = 100x (5 x 40/502 ) = 39.84 % ( where 502 is molar mass of comp)

P% = 3 x 30.97367 x 100/502 = 18.51 %

O % = (100x13x16)/502 = 41.434

H % = 100-39.84-18.51-41.434 = 0.216 %

% Ca = 100 x40/( 116) = 34.483 %

% Si = 100 x28/116 = 24.14 %

% O = 100-34.483-24.14 = 41.38 %

Explanation:

By Factor Theorem,

(2)^m - 3(2)^(m-1) + 4(2) - 4 = 0.

=> 2^m - 1.5 * 2^m + 4 = 0

=> 4 - 0.5 * 2^m = 0

=> 0.5 * 2^m = 4

=> 2^m = 8

=> m = 3.

Hence the value of m is 3.

Answer:

N2H4 + 3O2 → 2NO2 + 2H2O

Explanation:

Answer:  The mass of 405 mL of ethylene glycol is 444.3 g.

Explanation:

Density is defined as the mass contained per unit volume.

[tex]Density=\frac{mass}{Volume}[/tex]

Given :

Density of the ethylene glycol= [tex]1097g/L[/tex]

Volume of the ethylene glycol= [tex]405ml[/tex]  = 0.405 L   (1L=1000ml)

Mass of  the ethylene glycol = ?

Putting in the values we get:

[tex]1097g/L=\frac{x}{0.405L}[/tex]

[tex]x=444.3g[/tex]

Thus the mass of 405 mL of ethylene glycol is 444.3 g

Answer:

b. a type of gas is evolved ( hydrogen gas )

Stoichiometry is used for calculating the mass of a product from the number of moles of reactants. The correct option is A.

Stoichiometry is made up of two words, stoikhein, which means element, and metron, which means measure. Stoichiometry is a method of determining the data by using the knowledge of reactants and products.

There are five steps of stoichiometry that are the following:

Thus, the correct option is A. Calculating the mass of a product from the number of moles of reactant.

Learn more about stoichiometry, here:

https://brainly.com/question/14935523

#SPJ5

2.04 mol CBr₄

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Organic

Atomic Structure

Step 1: Define

675 g CBr₄

Step 2: Identify Conversions

Molar Mass of C - 12.01 g/mol

Molar Mass of Br - 79.90 g/mol

Molar Mass of CBr₄ - 12.01 + 4(79.90) = 331.61 g/mol

Step 3: Convert

[tex]\displaystyle 675 \ g \ CBr_4(\frac{1 \ mol \ CBr_4}{331.61 \ g \ CBr_4}) = 2.03552 \ mol \ CBr_4[/tex]

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

2.03552 mol CBr₄ ≈ 2.04 mol CBr₄

Answer:

[tex]\boxed {\boxed {\sf About \ 2.04 \ moles \ of \ CBr_4}}[/tex]

Explanation:

1. Define Formula

The compound is carbon tetrabromide. The tetra indicates 4 atoms of bromine.

2. Find Molar Mass

There are 2 elements in this compound: carbon and bromine. Use the Periodic Table to find the molar masses of these elements.

The molar mass is based on the number of atoms in the compound. The compound has 1 atom of carbon and 4 atoms of bromine.

CBr₄= 1(12.011 g/mol) + 4(79.90 g/mol)

= 12.011 g/mol+319.60 g/mol = 331.611 g/mol

3. Convert Grams to Moles

We want to convert 675 grams to moles. We should use the molar mass as a fraction.

[tex]\frac{331.611 \ g \ CBr_4}{1 \ mol \ CBr_4 }[/tex]

Multiply by the given number of grams.

[tex]675 \ g \ CBr_4 *\frac{331.611 \ g \ CBr_4}{1 \ mol \ CBr_4 }[/tex]

Flip the fraction so the grams of CBr₄ will cancel.

[tex]675 \ g \ CBr_4 *\frac{1 \ mol \ CBr_4 }{331.611 \ g \ CBr_4}[/tex]= [tex]675 \ *\frac{1 \ mol \ CBr_4 }{331.611 \ }[/tex]

[tex]\frac{675 \ mol \ CBr_4 }{331.611 \ }[/tex] = [tex]2.03551752 \ mol \ CBr_4[/tex]

4.Round

The original measurement, 675 grams has 3 significant figures (6,7 and 5), so our answer must have the same.

For the answer we found, 3 sig figs is the hundredth place.

[tex]2.03551752 \ mol \ CBr_4[/tex]

The 5 in the thousandth place tells us to round the 3 to a 4.

[tex]\approx 2.04 \ mol \ CBr_4[/tex]

There are about 2.04 moles of carbon tetrabromide in 675 grams.