3.00 kilograms of hydrogen are converted to helium by nuclear fusion. How much of it, in kilograms, remains as matter (and is thus not converted to energy)? ke

Answers

Answer 1

When 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, the amount of matter that remains unconverted into energy is 0.0294 kilograms, which is equivalent to 29.4 grams.

Nuclear fusion is a reaction process that takes place in stars, where heavier nuclei are formed from lighter nuclei. When 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, we can calculate the amount of mass that remains unconverted into energy using Einstein's famous formula E = mc², where E represents energy, m represents mass, and c represents the speed of light. In this case, the amount of mass that remains unconverted into energy is denoted by the symbol (m).

Given that the mass of hydrogen is 3.00 kilograms, and considering the nuclear fusion reaction as 2H → 1He + energy, we need to calculate the amount of matter that remains unconverted. The mass of 2H (two hydrogen nuclei) is 2.01588 atomic mass units (u), and the mass of 1He (helium nucleus) is 4.0026 u. Therefore, the difference in mass is calculated as 2.01588 + 2.01588 - 4.0026 = 0.02916 u.

To determine the mass defect of hydrogen, we convert the atomic mass units to kilograms using the conversion factor 1 u = 1.661 × 10^-27 kilograms. Thus, the mass defect can be calculated as m = (0.02916/2) × 1.661 × 10^-27 = 2.422 × 10^-29 kilograms.

Therefore, when 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, the amount of matter that remains unconverted into energy is 0.0294 kilograms, which is equivalent to 29.4 grams.

Learn more about hydrogen

https://brainly.com/question/30623765

#SPJ11


Related Questions

On the X-axis, two charges are placed; one of 2.50mC at the origin and the other of UP ส2 - PHYS_144_ASSIGNMENT II −3.50mC at x=0.600 m. Find the position on the x-axis where the net force on a small charge +q would be zero.

Answers

The position on the x-axis where the net force on a small charge +q would be zero is located at approximately x = 0.375 meters

Explanation: To find the position where the net force on a small charge +q is zero, we need to consider the electrostatic forces exerted by the two charges. The force between two charges is given by Coulomb's Law, which states that the force (F) between two charges (q1 and q2) separated by a distance (r) is proportional to the product of their charges and inversely proportional to the square of the distance between them.

Let's assume the small charge +q is located at position x on the x-axis. The force exerted by the 2.50 mC charge at the origin is directed towards the left and is given by F1 = (k * |q1 * q|) / (r1²), where k is the electrostatic constant. The force exerted by the -3.50 mC charge at x = 0.600 m is directed towards the right and is given by F2 = (k * |q2 * q|) / (r2²).

For the net force to be zero, the magnitudes of F1 and F2 must be equal. By equating these two forces and solving for x, we can find the position on the x-axis where the net force is zero.

After the calculations, the position is approximately x = 0.375 meters. At this point, the electrostatic forces exerted by the two charges cancel each other out, resulting in a net force of zero on the small charge +q.

Learn more about coulomb's law here:

https://brainly.com/question/506926

#SPJ11

Li-Air Battery's Biggest Advantage? Please explain the
reason why the voltage is much higher than the discharge voltage
when charging with the reaction formula.

Answers

The Li-Air battery is a type of rechargeable battery that is currently under development for energy storage applications. The biggest advantage of Li-Air batteries is their high energy density, which means that they can store more energy per unit mass than most other types of batteries.

This makes them particularly attractive for applications where weight and volume are critical factors, such as in electric vehicles and portable electronic devices.

When charging a Li-Air battery, the voltage is much higher than the discharge voltage due to the reaction formula. During charging, lithium ions are extracted from the lithium anode and transported through the electrolyte to the cathode, where they react with oxygen molecules from the air to form lithium peroxide. This reaction is highly exothermic and releases a large amount of energy, which is used to drive the charging process.

The reason why the voltage is much higher during charging is because the charging process requires a large amount of energy to drive the reaction in the reverse direction, i.e. to convert lithium peroxide back into lithium ions and oxygen molecules. This energy is supplied by the charging current, which drives the reaction forward and raises the voltage of the battery. The higher voltage during charging is therefore a reflection of the energy required to drive the reaction in the opposite direction, and is a key feature of Li-Air batteries.

To know more about lead-acid battery visit:

https://brainly.com/question/31355302

#SPJ11

Time-dependent Schrödinger's equation depends only on x. In contrast, Time- independent Schrödinger's equation depends on x and t

Answers

The time-dependent Schrödinger's equation is dependent only on position (x), while the time-independent Schrödinger's equation is dependent on both position (x) and time (t).

In quantum mechanics, the Schrödinger's equation describes the behavior of a quantum system. The time-dependent Schrödinger's equation, also known as wave equation, is given by:

iħ ∂ψ/∂t = -ħ²/2m ∂²ψ/∂x² + V(x)ψ,

The time-dependent Schrödinger's equation describes how the wave function evolves with time, allowing us to analyze dynamics and time evolution of quantum systems.

On the other hand, the time-independent Schrödinger's equation, also known as the stationary state equation, is used to find energy eigenstates and corresponding eigenvalues of a quantum system. It is given by:

-ħ²/2m ∂²ψ/∂x² + V(x)ψ = Eψ,

The time-independent Schrödinger's equation is independent of time, meaning it describes stationary, time-invariant solutions of a quantum system, such as the energy levels and wave functions of bound states.

Learn more about dependent here;

https://brainly.com/question/30958236

#SPJ11

You have three lenses of focal lengths: 10 cm, 25 cm, and -10 cm and are working with an object of height 4 cm.
You will have three scenarios that you will have to design an optical system for. For each scenario (a, b, and c) you need to determine the following three items. 1) The location of the object (even if given). 2) The location of the image and if it is virtual or real (even if given). 3) A ray diagram showing the three principle rays.
a. Use the 10cm lens to make a real image that is real and is twice as large as the original object.
b. Use the 25 cm lens to make a virtual image of any magnification.
c. Use the -10 cm lens to create an image of any magnification.

Answers

a) Using a 10 cm lens: Object located beyond 10 cm, real image formed between lens and focal point, twice the size of the object. b) Using a 25 cm lens: Object can be placed at any distance, virtual image formed on the same side as the object. c) Using a -10 cm lens: Object located beyond -10 cm, image formed on the same side, can be real or virtual depending on object's position.

a) Scenario with a 10 cm lens:

1) The location of the object: The object is located at a distance greater than 10 cm from the lens.

2) The location of the image and its nature: The image is formed on the opposite side of the lens from the object, between the lens and its focal point. The image is real.

3) Ray diagram: The ray diagram will include three principle rays: one parallel to the optical axis that passes through the focal point on the opposite side, one that passes through the center of the lens without deviation, and one that passes through the focal point on the same side and emerges parallel to the optical axis.

b) Scenario with a 25 cm lens:

1) The location of the object: The object can be placed at any distance from the lens.

2) The location of the image and its nature: The image is formed on the same side as the object and is virtual.

3) Ray diagram: The ray diagram will include three principle rays: one parallel to the optical axis that appears to pass through the focal point on the same side, one that passes through the center of the lens without deviation, and one that appears to pass through the focal point on the opposite side.

c) Scenario with a -10 cm lens:

1) The location of the object: The object is located at a distance greater than -10 cm from the lens.

2) The location of the image and its nature: The image is formed on the same side as the object and can be either real or virtual, depending on the specific placement of the object.

3) Ray diagram: The ray diagram will include three principle rays: one parallel to the optical axis that appears to pass through the focal point on the same side, one that passes through the center of the lens without deviation, and one that appears to pass through the focal point on the opposite side.

Learn more about focal point here:

https://brainly.com/question/32157159

#SPJ11

A charged particle causes an electric flux of −2600.0 N⋅m2/C to pass through a spherical Gaussian surface of radius R centered on the charge. What is the charge of the particle?

Answers

The electric flux can be defined as the amount of electric field that passes through a given area. According to Gauss's law, the electric flux passing through a closed Gaussian surface is equal to the net electric charge enclosed within the surface divided by the permittivity of the free space (ε₀).

The formula for calculating the electric flux through a closed surface is as follows:

ϕ = ∮E⋅dA where, ϕ is the electric flux, E is the electric field, dA is the differential area vector

We can use the same formula to calculate the electric charge of the particle.

ϕ = Q/ε₀ Where, Q is the electric charge, ε₀ is the permittivity of free space

ϕ = -2600.0 N.m²/C

For a spherical Gaussian surface, Q/ε₀ = -2600.0 N.m²/C

Q = ε₀ × ϕQ = (8.85 × 10⁻¹² C²/N.m²) × (-2600.0 N.m²/C)

Q = -0.023 N or 2.3 × 10⁻² C

Therefore, the charge of the particle is 2.3 × 10⁻² C

Learn about Gauss' law here: https://brainly.com/question/14773637

#SPJ11

Which has the greater density—1 kg of sand or 10 kg of sand?.
Explain

Answers

The density of 1 kg of sand and 10 kg of sand is the same because the ratio of mass to volume remains constant.

Density is defined as mass per unit volume. In this case, we are comparing the densities of 1 kg of sand and 10 kg of sand.

Assuming the sand is uniform, the density remains constant regardless of the amount of sand. This means that both 1 kg of sand and 10 kg of sand have the same density.

To understand why the density remains the same, let's consider the definition of density:

Density = Mass / Volume

In this scenario, we are comparing the densities of two different amounts of sand: 1 kg and 10 kg. The mass increases by a factor of 10, but the volume also increases by the same factor. Assuming the sand particles remain the same and there is no compaction or voids, the volume scales linearly with mass.

Therefore, the density of 1 kg of sand and 10 kg of sand is the same because the ratio of mass to volume remains constant.

In conclusion, both 1 kg of sand and 10 kg of sand have the same density since the increase in mass is accompanied by an equal increase in volume.

To learn more about density visit: https://brainly.com/question/1354972

#SPJ11

. For the roller coaster shown below, Points A and C are 10 m and 4 m above the ground, respectively. Point B is at ground level. Calculate the speeds of the cars at Points B and if the speed at Point A is approximately zero. As stated earlier, assume that there are no dissipative effects. (No, the mass of the car is not given.) speed at B only ) A B U mass cancels out in the algebra

Answers

The speed of the roller coaster car at Point B is 14m/s

In this problem, we can apply the principle of conservation of energy to find the speed of the roller coaster car at Point B. At Point A, the car is at a height of 10 m above the ground and has zero speed. At Point B, the car is at ground level, so its height above the ground is zero.

According to the principle of conservation of energy, the total mechanical energy of the system remains constant. At Point A, the car has potential energy due to its height above the ground, but no kinetic energy because its speed is zero. At Point B, the car has no potential energy because its height is zero, but it will have kinetic energy due to its speed.

Since there are no dissipative effects, the mechanical energy at Point A is equal to the mechanical energy at Point B. Mathematically, this can be expressed as:

m * g * hA = 0.5 * m * vB^2

Here, m represents the mass of the car, g is the acceleration due to gravity (approximately 9.8 m/s^2), hA is the height at Point A (10 m), and vB is the speed at Point B that we want to calculate.

The mass of the car cancels out in the equation, simplifying it to:

g * hA = 0.5 * vB^2

Plugging in the values, we have:

9.8 m/s^2 * 10 m = 0.5 * vB^2

Solving for vB gives us:

vB^2 = 9.8 m/s^2 * 10 m * 2

vB^2 = 196 m^2/s^2

vB = √(196 m^2/s^2)

vB ≈ 14 m/s

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

A ball with a mass of 38kg travels to the right with a velocity of 38m/s. It collides with a larger ball with a mass of 43kg, traveling in the opposite direction with a velocity of -43m/s. After the collision, the larger mass moves off to the right with a velocity of 33m/s. What is the velocity of the smaller mass after the collision?
Note: Don't forget the units!

Answers

The velocity of the smaller mass after the collision is -22.19 m/s, as calculated after applying the law of conservation of momentum.

Given, Mass of the smaller ball (m₁) = 38 kg. Velocity of the smaller ball (u₁) = 38 m/s, Mass of the larger ball (m₂) = 43 kg,  Velocity of the larger ball (u₂) = -43 m/s, Velocity of the larger ball after collision (v₂) = 33 m/s. Let v₁ be the velocity of the smaller ball after the collision. According to the law of conservation of momentum, the momentum before the collision is equal to the momentum after the collision (provided there are no external forces acting on the system).

Mathematically, P₁ = P₂, Where, P₁ = m₁u₁ + m₂u₂ is the total momentum before the collision. P₂ = m₁v₁ + m₂v₂ is the total momentum after the collision. Substituting the given values, we get;38 × 38 + 43 × (-43) = 38v₁ + 43 × 33Simplifying the above expression, we get: v₁ = -22.19 m/s. Therefore, the velocity of the smaller mass after the collision is -22.19 m/s. (note that the negative sign indicates that the ball is moving in the left direction.)

Learn more about law of conservation of momentum:

https://brainly.com/question/7538238

#SPJ11

The figure is the position-versus-time graph of a particle in simple harmonic motion. What is the phase constant? a) \[ \phi_{0}=-\pi / 3 \] b) 0 c) \[ \phi_{0}=\pi / 3 \] d) \[ \phi_{0}=2 \pi / 3 \]

Answers

Based on the information given, none of the options (a, b, c, or d) can be definitively determined as the correct phase constant for the given graph.

To determine the phase constant based on the position-versus-time graph of a particle in simple harmonic motion, we need to examine the relationship between the position (x) and time (t) given by the equation:

x(t) = A * cos(ωt + φ₀)

Where:

A is the amplitude of the motion

ω is the angular frequency

φ₀ is the phase constant

Looking at the given options:

a) φ₀ = -π / 3

b) φ₀ = 0

c) φ₀ = π / 3

d) φ₀ = 2π / 3

Since we don't have any information about the amplitude or the angular frequency from the given graph, we cannot determine the exact phase constant. The phase constant φ₀ represents the initial phase of the motion and can vary depending on the specific conditions or initial position of the particle. Therefore, based on the information given, none of the options (a, b, c, or d) can be definitively determined as the correct phase constant for the given graph.

Learn more about harmonic motion here:

https://brainly.com/question/32494889

#SPJ11

A block attached to a horizontal spring is pulled back a Part A certain distance from equilibrium, then released from rest at=0≤ potential energy? Express your answer with the appropriate units.

Answers

When a block attached to a horizontal spring is pulled back a certain distance from equilibrium and then released from rest, it possesses  [tex]\leq 0[/tex] potential energy due to the displacement from equilibrium.

The potential energy of a block-spring system is stored in the spring and depends on the displacement of the block from its equilibrium position. In this case, the block is pulled back a certain distance from equilibrium, which means it is displaced in the opposite direction of the spring's natural position.

The potential energy of a spring is given by the formula:

[tex]PE = (\frac{1}{2} ) * k * x^2\frac{x}{y}[/tex]

where PE is the potential energy, k is the spring constant, and x is the displacement from equilibrium.

When the block is pulled back, it gains potential energy due to its displacement from equilibrium. At the release point, the block is at rest, and all of its initial energy is potential energy.

To calculate the potential energy, we need to know the spring constant and the displacement. However, the given problem does not provide specific values for these parameters. Therefore, without more information, we cannot determine the numerical value of the potential energy. Nonetheless, we can conclude that the block possesses potential energy due to its displacement from equilibrium, and the units of potential energy are joules (J).

Learn more about spring constant here:

https://brainly.com/question/14159361

#SPJ11

Luis is nearsighted. To correct his vision, he wears a diverging eyeglass lens with a focal length of -0.50 m. When wearing glasses, Luis looks not at an object but at the virtual image of the object because that is the point from which diverging rays enter his eye. Suppose Luis, while wearing his glasses, looks at a vertical 10-cm-tall pencil that is 2.0 m in front of his glasses. Part A How far from his glasses is the image of the pencil? Express your answer with the appropriate units. s'] = 0.40 m Previous Answers ✓ Correct Luis is nearsighted. To correct his vision, he wears a diverging eyeglass lens with a focal length of -0.50 m. When wearing glasses, Luis looks not at an object but at the virtual image of the object because that is the point from which diverging rays enter his eye. Suppose Luis, while wearing his glasses, looks at a vertical 10-cm-tall pencil that is 2.0 m in front of his glasses. Y Part B What is the height of the image? Express your answer with the appropriate units. h' = 2.0 cm Previous Answers ✓ Correct Luis is nearsighted. To correct his vision, he wears a diverging eyeglass lens with a focal length of -0.50 m. When wearing glasses, Luis looks not at an object but at the virtual image of the object because that is the point from which diverging rays enter his eye. Suppose Luis, while wearing his glasses, looks at a vertical 10-cm-tall pencil that is 2.0 m in front of his glasses. Heview Constants Your answer to part b might seem to suggest that Luis sees everything as being very tiny. However, the apparent size of an object (or a virtual image) is determined not by its height but by the angle it spans. In the absence of other visual cues, a nearby short object is perceived as being the same size as a distant tall object if they span the same angle at your eye. From the position of the lens, what angle is spanned by the actual pencil 2.0 m away that Luis sees without his glasses? And what angle is spanned by the virtual image of the pencil that he sees when wearing his glasses? Express your answers in degrees and separated by a comma.

Answers

Part AThe object distance is u = -2.0 m, the focal length is f = -0.50 m and we are looking for the image distance which is given by the lens formula, 1/f = 1/v - 1/u1/-0.5=1/v-1/-2v=0.4 mTherefore, the image distance is 0.4 m.Part BThe magnification is given by the relation, m = -v/uUsing the values of v and u calculated above, we getm = -0.4/-2 = 0.2The magnification is positive which means that the image is erect and virtual.

The height of the object is h = 10 cm and we are looking for the height of the image, which is given byh' = mh = 0.2 × 10 = 2.0 cmThe height of the image is 2.0 cm.Angle CalculationThe angle spanned by an object at the eye depends on both the size and the distance of the object from the eye. The angle θ can be calculated using the relation,θ = 2tan⁻¹(h/2d)where h is the height of the object and d is its distance from the eye.1. For the object without glasses:

The object is 2.0 m away from the lens and has a height of 10 cm.θ1 = 2tan⁻¹(0.1/4) = 2.86 degrees2. For the image with glasses: The image is virtual and appears 0.4 m behind the lens.

The height of the image is 2.0 cm.θ2 = 2tan⁻¹(0.02/0.4) = 2.86 degreesTherefore, the angles spanned by the object and the image are the same and equal to 2.86 degrees.

A vector A is defined as: A=8.02∠90∘. What is Ay, the y-component of A ? Round your answer to two (2) decimal places. If there is no solution or if the solution cannot be found with the information provided, give your answer as: −1000

Answers

The magnitude of the displacement, represented by vector A, is 8.02 meters.

The magnitude of the displacement is the absolute value or the length of the vector, and in this case, it is 8.02 meters. The magnitude represents the distance or the size of the displacement without considering its direction. Since vector A is defined as 8.02 without any angle or unit specified, we can assume that the magnitude is given directly as 8.02. It indicates that the object has undergone a displacement of 8.02 meters. Magnitude is a scalar quantity, meaning it only has magnitude and no direction.

To know more about displacement, here

brainly.com/question/11934397

#SPJ4

--The complete Question is, An object undergoes a displacement represented by vector A = 8.02. If the vector A represents the displacement of the object, what is the magnitude of the displacement in meters? Provide your answer rounded to two decimal places.--

explain in your own words the following:
1. ATMOSPHERIC OPTICS
2. HUYGEN’S PRINCIPLE AND INTERFERENCE OF LIGHT
3. PHOTOELECTRIC EFFECT

Answers

Atmospheric Optics: Atmospheric optics is the study of how light interacts with the Earth's atmosphere to produce various optical phenomena.

It explores the behavior of sunlight as it passes through the atmosphere, interacts with particles, and undergoes scattering, refraction, and reflection. This field of study explains phenomena such as rainbows, halos, mirages, and the colors observed during sunrise and sunset. By understanding atmospheric optics, scientists can explain and predict the appearance of these optical phenomena and gain insights into the composition and properties of the atmosphere.

Huygen's Principle and Interference of Light:

Huygen's principle is a fundamental concept in wave optics proposed by Dutch physicist Christiaan Huygens. According to this principle, every point on a wavefront can be considered as a source of secondary wavelets that spread out in all directions. These secondary wavelets combine together to form a new wavefront. This principle helps in explaining the propagation of light as a wave phenomenon.

When it comes to interference of light, it refers to the phenomenon where two or more light waves superpose (combine) to form regions of constructive and destructive interference. Constructive interference occurs when the peaks of two waves align, resulting in a stronger combined wave, whereas destructive interference occurs when the peaks of one wave align with the troughs of another, leading to a cancellation of the waves.

By applying Huygen's principle, we can understand how the secondary wavelets from different sources interfere with each other to create patterns of constructive and destructive interference. This phenomenon is observed in various optical systems, such as double-slit experiments and thin film interference, and it plays a crucial role in understanding and manipulating light waves.

Photoelectric Effect:

The photoelectric effect refers to the emission of electrons from a material when it is exposed to light or electromagnetic radiation of sufficiently high frequency. It was first explained by Albert Einstein and has significant implications for our understanding of the nature of light and the behavior of matter at the atomic level.

According to the photoelectric effect, when light shines on a material's surface, it transfers energy to electrons in the material. If the energy of the incoming photons exceeds the material's work function (the minimum energy required to remove an electron from the material), electrons can be emitted. The emitted electrons are known as photoelectrons.

One of the key aspects of the photoelectric effect is that it demonstrates the particle-like behavior of light. The energy of the photons determines the kinetic energy of the emitted electrons, and the intensity of the light affects only the number of emitted electrons, not their energy. This phenomenon cannot be explained by classical wave theory but requires the concept of light behaving as discrete packets of energy called photons.

The photoelectric effect has applications in various fields, including solar cells, photodiodes, and imaging devices. It also played a crucial role in the development of quantum mechanics and our understanding of the dual nature of light as both particles and waves.

To know more about Huygen's Principle

https://brainly.com/question/2127578

#SPJ11

6. The primary line current of an open delta connected
transformer is measured to be 100 A.If the turns ratio between the
primary and secondary coils 2 : 1, the line current in the primary
is.

Answers

The line current in the primary of an open delta-connected transformer with a measured primary line current of 100 A and a turns ratio of 2:1 between the primary and secondary coils will be 200 A.

In an open delta connection, also known as a V-V connection, two transformers are used to create a three-phase system. One transformer acts as a standard three-phase transformer, while the other transformer is a reduced-capacity transformer. The primary coils of the two transformers are connected in a triangular or delta configuration, hence the name "open delta."

When measuring the line current in the primary of the open delta transformer, the turns ratio between the primary and secondary coils is essential. In this case, the turns ratio is 2:1, which means for every 2 turns in the primary coil, there is 1 turn in the secondary coil.

Since the line current in the primary is measured to be 100 A, we can determine the line current in the secondary by applying the turns ratio. Multiplying the measured primary line current by the turns ratio (2) gives us the secondary line current, 200 A.

Therefore, the line current in the primary of the open delta-connected transformer is 200 A.

To know more about delta-connected transformers click here:

https://brainly.com/question/31748033

#SPJ11

An AC generator supplies an mms voltage of 110 V at 60.0 Hz. It is connected in series with a 0.550 H inductor, a 4.80 uF capacitor and a 321 2 resiste What is the impedance of the circuit? Rest ThieWhat is the mms current through the resistor? Reso What is the averzoe power dissipated in the circuit? GR What is the peak current through the resistor? Geo What is the peak voltage across the inductor? EcWhat is the peak voltage across the capacitor EcThe generator frequency is now changed so that the circuit is in resonance. What is that new (resonance) frequency?

Answers

The total impedance (Z) is 508.61 Ω, RMS Current through the resistor is 0.153 A, Average Power Dissipated in the circuit is 7.44 W, Peak Current through the resistor is 0.217 A.

Peak Voltage across the inductor is 45.01 V, Peak Voltage across the capacitor is 95.70 V, and the new resonance frequency is approximately 1.05 kHz.

To find the impedance of the circuit, we need to calculate the total impedance, which is the combination of the inductive reactance (XL) and the capacitive reactance (XC) in series with the resistance (R).

Given:

Voltage (V) = 110 V

Frequency (f) = 60.0 Hz

Inductance (L) = 0.550 H

Capacitance (C) = 4.80 uF = 4.80 × [tex]10^{-6}[/tex] F

Resistance (R) = 321 Ω

Impedance (Z):

The inductive reactance (XL) is given by XL = 2πfL, where π is pi (approximately 3.14159).

XL = 2π × 60.0 Hz × 0.550 H = 207.35 Ω

The capacitive reactance (XC) is given by XC = 1/(2πfC).

XC = 1/(2π × 60.0 Hz × 4.80 × 10 [tex]10^{-6}[/tex]F) = 440.97 Ω

The total impedance (Z) is the square root of the sum of the squares of the resistance (R), inductive reactance (XL), and capacitive reactance (XC).

Z = √(R² + (XL - XC)²)

Z = √(321² + (207.35 - 440.97)²) = 508.61 Ω (rounded to two decimal places)

RMS Current through the resistor:

The RMS current (Irms) can be calculated using Ohm's law: Irms = Vrms / Z, where Vrms is the root mean square voltage.

Since the voltage is given in peak form, we need to convert it to RMS using the relation Vrms = Vpeak / √2.

Vrms = 110 V / √2 ≈ 77.78 V

Irms = 77.78 V / 508.61 Ω ≈ 0.153 A (rounded to three decimal places)

Average Power Dissipated in the circuit:

The average power (P) dissipated in the circuit can be calculated using the formula P = Irms² × R.

P = (0.153 A)²× 321 Ω ≈ 7.44 W (rounded to two decimal places)

Peak Current through the resistor:

The peak current (Ipeak) through the resistor is equal to the RMS current multiplied by √2.

Ipeak = Irms × √2 ≈ 0.217 A (rounded to three decimal places)

Peak Voltage across the inductor:

The peak voltage (Vpeak) across the inductor is given by:

Vpeak = XL × Ipeak.

Vpeak = 207.35 Ω × 0.217 A ≈ 45.01 V (rounded to two decimal places)

Peak Voltage across the capacitor:

The peak voltage (Vpeak) across the capacitor is given by:

Vpeak = XC × Ipeak.

Vpeak = 440.97 Ω × 0.217 A ≈ 95.70 V (rounded to two decimal places)

Resonance Frequency:

At resonance, the inductive reactance (XL) and the capacitive reactance (XC) cancel each other out (XL = XC), resulting in a purely resistive circuit.

XL = XC

2πfL = 1/(2πfC)

f^2 = 1/(4π² LC)

f = 1 / (2π√(LC))

f = 1 / (2π√(0.550 H × 4.80 × [tex]10^{-6}[/tex]F))

f ≈ 1.05 kHz (rounded to two decimal places)

Therefore, the new resonance frequency is approximately 1.05 kHz.

To learn more about total impedance visit:

brainly.com/question/24225360

#SPJ11

A 15N force is applied to a 2.0 kg cart that is moving along a plane inclined at an angle of 30.0⁰ above the horizontal. The applied force is in the same direction as the cart's motion. If the cart travels 40.0 cm, how much work does the applied force do on the cart?

Answers

The work done by the applied force on the cart is approximately 5.196 Joules (J). The International System of Units uses the joule as its unit of energy.

To calculate the work done by the applied force on the cart, we can use the formula:

Work = Force × Distance × cos(θ)

Where:

Force = 15 N (applied force)

Distance = 40.0 cm = 0.40 m (distance traveled by the cart)

θ = 30.0 degrees (angle of the inclined plane)

Plugging in the values:

Work = 15 N × 0.40 m × cos(30.0 degrees)

Using the value of cos(30.0 degrees) = √3/2:

Work = 15 N × 0.40 m × (√3/2)

Work = 15 N × 0.40 m × 0.866

Work ≈ 5.196 N·m

To know more about unit of energy

https://brainly.com/question/14791143

#SPJ11

Write an expression for the energy stored E, in a stretched wire of length l , cross sectional area A, extension e , and Young's modulus Y of the material of the wire.


Answers

The expression for the energy stored (E) in a stretched wire of length (l), cross-sectional area (A), extension (e), and Young's modulus (Y) is (Y * A * e^2) / (2 * l).

The expression for the energy stored (E) in a stretched wire can be derived using Hooke's Law and the definition of strain energy.

Hooke's Law states that the stress (σ) in a wire is directly proportional to the strain (ε), where the constant of proportionality is the Young's modulus (Y) of the material:

σ = Y * ε

The strain (ε) is defined as the ratio of the extension (e) to the original length (l) of the wire:

ε = e / l

By substituting the expression for strain into Hooke's Law, we get:

σ = Y * (e / l)

The stress (σ) is given by the force (F) applied to the wire divided by its cross-sectional area (A):

σ = F / A

Equating the expressions for stress, we have:

F / A = Y * (e / l)

Solving for the force (F), we get:

F = (Y * A * e) / l

The energy stored (E) in the wire can be calculated by integrating the force (F) with respect to the extension (e):

E = ∫ F * de

Substituting the expression for force, we have:

E = ∫ [(Y * A * e) / l] * de

Simplifying the integral, we get:

E = (Y * A * e^2) / (2 * l)

Therefore, the expression for the energy stored (E) in a stretched wire of length (l), cross-sectional area (A), extension (e), and Young's modulus (Y) is (Y * A * e^2) / (2 * l).

For more questions on Young's modulus, click on:

https://brainly.com/question/6864866

#SPJ8

A shell is shot with an initial velocity v
0

of 13 m/s, at an angle of θ 0

=63 ∘
with the horizontal. At the top of the trajectory, the shell explodes into two fragments of equal mass (see the figure). One fragment, whose speed immediately after the explosion is zero, falls vertically. How far from the gun does the other fragment land, assuming that the terrain is level and that air drag is negligible? Number Units The figure shows an arrangement with an air track, in which a cart is connected by a cord to a hanging block. The cart has mass m 1

= 0.640 kg, and its center is initially at xy coordinates (−0.480 m,0 m); the block has mass m 2

=0.220 kg, and its center is initially at xy coordinates (0,−0.250 m). The mass of the cord and pulley are negligible. The cart is released from rest, and both cart and block move until the cart hits the pulley. The friction between the cart and the air track and between the pulley and its axle is negligible. (a) In unitvector notation, what is the acceleration of the center of mass of the cart-block system? (b) What is the velocity of the com as a function of time t, in unit-vector notation? (a) ( i- j) (b) ( i j)t The figure gives an overhead view of the path taken by a 0.162 kg cue ball as it bounces from a rail of a pool table. The ball's initial speed is 1.96 m/s, and the angle θ 1

is 59.3 ∘
. The bounce reverses the y component of the ball's velocity but does not alter the x component. What are (a) angle θ 2

and (b) the magnitude of the change in the ball's linear momentum? (The fact that the ball rolls is irrelevant to the problem.) (a) Number Units (b) Number Units A 5.0 kg toy car can move along an x axis. The figure gives F x

of the force acting on the car, which begins at rest at time t=0. The scale on the F x

axis is set by F xs

=6.0 N. In unit-vector notation, what is P
at (a)t=8.0 s and (b)t=5.0 s,(c) what is v
at t=3.0 s ?

Answers

The other fragment lands at a distance of 11.04 m from the gun.

It is required to calculate how far from the gun the other fragment land assuming that the terrain is level and that air drag is negligible.

Let's solve the given problem. Using the concept of projectile motion, the time of flight can be calculated which is given by

t = 2v₀sinθ/g, Wherev₀ = 13 m/s, θ = 63° and g = 9.8 m/s²

Substituting the given values, we get

t = 2(13)sin63°/9.8t = 1.837 s

After the explosion, let the horizontal range of one of the fragments be x. Now, this range can be calculated by using horizontal projectile motion, which is given by

x = v₀cosθt, Wherev₀ = 13 m/s, θ = 63° and t = 1.837 s

Substituting the given values, we get

x = 13cos63° × 1.837x = 11.04 m

Thus, the other fragment lands at a distance of 11.04 m from the gun.

To learn about projectile motion here:

https://brainly.com/question/10680035

#SPJ11

please lable parts and answers. thank you
1 -2 0 3 In the figure shown E = 75 V/m, and the numbers on the x-axis are in meters. a. If the voltage at x = 0 is 100 V, what is the voltage at x = 2? [ Select b. If a proton is released from rest a

Answers

The numbers on the x-axis are in meters. (a) Therefore, V(2) = 100 + 75(2) = 250 V .(b) The speed of the proton when it reaches x = 0 is,v = √(2.3 x 10^8 m2/s2) = 1.5 x 10^4 m/s

a. If the voltage at x = 0 is 100 V, what is the voltage at x = 2? [ Select ]b. If a proton is released from rest at x = 2,  [ Select ]a. To find the voltage at x = 2, we use the following equation, V(x) = V0 + E(x)

where, V(x) = voltage at position xV0 = voltage at x = 0E = electric field intensity

We know that E = 75 V/m, V0 = 100 V and x = 2 m.

Therefore, V(2) = 100 + 75(2) = 250 V

b. The proton is moving in an electric field and undergoes a force given by, F = qE

where, q = charge on the proton, E = electric field strength

In this case, the force is constant and we can apply kinematic equations to find the speed of the proton when it reaches x = 0.

The kinematic equation is,v2 = u2 + 2aswhere,u = initial velocity = 0a = acceleration = qE/m

where m is the mass of the proton.

We know that q = 1.6 x 10^-19 C, E = 75 V/m and m = 1.67 x 10^-27 kg. Therefore,a = (1.6 x 10^-19 C)(75 V/m)/(1.67 x 10^-27 kg) = 5.7 x 10^7 m/s2s = displacement = 2 mPutting the values in the equation for v2,v2 = (0)2 + 2(5.7 x 10^7 m/s2)(2 m) = 2.3 x 10^8 m2/s2

The speed of the proton when it reaches x = 0 is,v = √(2.3 x 10^8 m2/s2) = 1.5 x 10^4 m/s

Learn more about voltage  here:

https://brainly.com/question/12804325

#SPJ11

(a) the itage iocation in crt (0) the maivincasien (c) the imaje height in cm cm (d) Is the image real or virtua? rear virtual (e) Is the inaje uptigitc or imverted? usright inerted

Answers

Based on the given information, the image location in a CRT is at the maximum intensity position, the image height is in centimeters, the image is virtual, and the image is inverted.

In a CRT (cathode ray tube), the image is formed by a beam of electrons hitting a phosphor-coated screen. Analyzing the provided information:

(a) The image location is at the maximum intensity position, which typically occurs at the center of the screen where the electron beam is focused.

(c) The image height is given in centimeters, suggesting that the measurement is referring to the physical size of the image on the screen.

(d) The image is described as virtual, indicating that it is not formed by the actual convergence of light rays. In a CRT, the electron beam creates a glowing spot on the phosphor screen, producing a virtual image.

(e) The image is stated to be inverted, meaning that it is upside down compared to the orientation of the object being displayed. This inversion occurs due to the way the electron beam scans the screen from top to bottom, left to right.

Overall, the given information implies that in a CRT, the image is located at the maximum intensity position, has a specified height in centimeters, is virtual (not formed by light rays), and appears inverted compared to the original object.

Learn more about intensity here:

https://brainly.com/question/28330067

#SPJ11

A truck drives 39 kilometers in 20 minutes. How far could the truck have traveled (in units of kilometers) in 20 minutes if it was accelerating at 2 m/s^2? (Your answer should be in units of kilometers (km), but just write down the number part of your answer.)

Answers

A truck drives 39 kilometers in 20 minutes. The truck could have traveled 6.67 kilometers (km) in 20 minutes if it was accelerating at 2 m/s².

Given that a truck drives 39 kilometers in 20 minutes.

We are supposed to determine how far could the truck have traveled (in units of kilometers) in 20 minutes if it was accelerating at 2 m/s².

We have to convert the acceleration to kilometers per minute.1 m/s² = 60m/1 min²1 m/min² = 1/60 m/s²2 m/s² = (2/60) m/min² = 1/30 m/min²

Now, we need to find the distance d that the truck travels during the 20 minutes of acceleration.

We know that the initial velocity is zero and that the acceleration is 1/30 m/min².

We can use the following kinematic equation to find the distance traveled: d = (1/2)at²

where d is the distance, a is the acceleration, and t is the time. Since the acceleration is in m/min², the time t needs to be in minutes. Therefore, t = 20 minutes.

d = (1/2)(1/30)(20)²d = (1/60)(400)d = 6.67 km

The truck could have traveled 6.67 kilometers (km) in 20 minutes if it was accelerating at 2 m/s².

Learn more about kinematic equation here:

https://brainly.com/question/24458315

#SPJ11

a) Calculate the inductance of the solenoid if it contains 500 turns, its length is 35.0 cm and has a cross-sectional area of 4.50 cm2b) What is the self-induced emf in the solenoid if the current it carries decreases at the rate of 61.0 A/s?

Answers

a) The inductance of the solenoid if it contains 500 turns, its length is 35.0 cm and has a cross-sectional area of 4.50 cm is 0.001H

b) The self-induced emf in the solenoid if the current it carries decreases at the rate of 61.0 A/s is -0.061V

a) To calculate the inductance of the solenoid, we'll use the formula:

[tex]\[L = \frac{{\mu_0 \cdot N^2 \cdot A}}{{l}}\][/tex]

Substituting the given values:

[tex]\[L = \frac{{(4\pi \times 10^{-7} \, \text{Tm/A}) \cdot (500 \, \text{turns})^2 \cdot (4.50 \, \text{cm}^2)}}{{35.0 \, \text{cm}}}\][/tex]

Simplifying and calculating:

[tex]\[L \approx 0.001\, \text{H} \quad \text{(Henry)}\][/tex]

b) To find the self-induced electromotive force (emf) in the solenoid, we'll use Faraday's law of electromagnetic induction:

[tex]\[\text{emf} = -L \frac{{dI}}{{dt}}\][/tex]

Substituting the given value for the rate of change of current:

[tex]\[\text{emf} = -(0.001\, \text{H}) \cdot (61.0\, \text{A/s})\][/tex]

Calculating the self-induced emf:

[tex]\[\text{emf} \approx -0.061\, \text{V} \quad \text{(Volt)}\][/tex]

Note that the negative sign indicates that the self-induced emf acts in the opposite direction to the change in current.

Learn more about self-induced emf here:

https://brainly.com/question/29656124

#SPJ11

A spherical UFO streaks across the sky at a speed of 0.90c relative to the earth. A person on earth determines the length of the UFO to be 230 m along the direction of its motion. State the ship's dimensions in the x- and y-axis as its travelling and when it lands (you must solve for the length/diameter of the ship).

Answers

The ship's dimensions in the x-axis are approximately 676.2 m (length) and D₀ (diameter), and its dimensions in the y-axis remain the same as D₀ when it is moving and when it lands.

To solve for the dimensions of the ship along the x- and y-axis, we can use the concept of length contraction in special relativity. According to special relativity, objects moving at high speeds relative to an observer undergo length contraction in the direction of their motion.

Let's denote the ship's dimensions in its rest frame (ship's frame) as L₀ (length) and D₀ (diameter). We want to find the dimensions of the ship as observed by a person on Earth when it is moving at a speed of 0.90c.

The length contraction factor, γ, can be calculated using the Lorentz factor:

γ = 1 / sqrt(1 - (v/c)^2)

Where v is the velocity of the ship and c is the speed of light.

Given that v = 0.90c, we can calculate γ:

γ = 1 / sqrt(1 - (0.90)^2)

Using a calculator, we find γ ≈ 2.94.

Now, let's consider the length contraction along the direction of motion (x-axis):

L = L₀ / γ

Substituting the given length (L) as 230 m, we can solve for L₀:

230 m = L₀ / 2.94

Solving for L₀, we find L₀ ≈ 676.2 m.

Therefore, the ship's length in its frame is approximately 676.2 m.

Next, let's consider the diameter along the y-axis. According to length contraction, there is no contraction in directions perpendicular to the motion. Therefore, the diameter of the ship remains the same:

D = D₀

Since no length contraction occurs along the y-axis, the ship's diameter remains unchanged.

The ship's dimensions in the x-axis are approximately 676.2 m (length) and D₀.

To know more about velocity

https://brainly.com/question/30559316

#SPJ11

The absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times).
Justify your answer with mathematical equation or graphical illustration.

Answers

The absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times) can be justified by plotting a graph of the absorption rate of the material versus exposure time.

Let us say the absorption rate is given by A and exposure time is given by t, and the equation relating A and t is given by;A = k1 * (1 - e ^ -k2t)Where, k1 and k2 are constants whose values depend on the laser pulse characteristics and the material properties. e is the mathematical constant (approximately equal to 2.71828).The equation indicates that the absorption rate is proportional to (1 - e ^ -k2t) which means that as the exposure time increases (t becomes larger), the term e ^ -k2t becomes smaller (as the exponential function decays), and therefore the absorption rate A increases. Thus, the absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times).

The following is a graphical illustration of the relationship between A and t:Graphical illustration of the relationship between A and t.

Learn more about absorption rate here:

brainly.com/question/30132814

#SPJ11

A magnetic force is measured to be F=(1.70×10−5N)^−(3.70×10−5)^​ acts on a particle that has a charge of −2.75nC. The particle is moving in a uniform magnetic field 2.35 T that has its direction in −Z direction. Calculate the velocity of the particle.

Answers

Given that,

The magnetic force on a particle is  F = 1.70 × 10⁻⁵ N

The charge on the particle is q = -2.75 nC

The magnetic field intensity is B = 2.35 T

The direction of the magnetic field is in the -z direction

The force on a charged particle moving in a magnetic field is given by F = qvB sinθ

where v is the velocity of the particle, B is the magnetic field, q is the charge on the particle, and θ is the angle between v and B

Further, sinθ = 1 as the velocity is perpendicular to the magnetic field.

So, F = qvB

Also, F = m × a (where m is the mass of the particle and a is the acceleration)

We can substitute a/v with v/dt, where dt is the time taken to cross a distance d.

Then F = m × v/dt × Bqvd/dt

= mv²/dt

= Bqm/dt

So, v = Bqm/F = 2.35 × 2.75 × 10⁻⁹/1.70 × 10⁻⁵

= 3.81 × 10⁴ m/s

Therefore, the velocity of the particle is 3.81 × 10⁴ m/s.

Learn more about velocity of particle here

https://brainly.com/question/80295

#SPJ11

A copper wire has a circular cross section with a radius of 1.71 mm. (a) If the wire carries a current of 3.18 A, find the drift speed (in m/s ) of electrons in the wire. (Take the density of mobile charge carriers in copper to be n=1.10×1029 electrons /m3.) \& m/s (b) For the same wire size and current, find the drift speed (in m/s ) of electrons if the wire is made of aluminum with n=2.11×1029 electrons/m 3 . m/s

Answers

(a) the drift speed of electrons in a copper wire carrying a current of 3.18 A and with a radius of 1.71 mm is 0.002 m/s.(b)the drift speed of electrons in an aluminum wire carrying a current of 3.18 A and with the same radius is 0.001 m/s.

(a) The drift speed (v_d) of electrons in a copper wire carrying a current of 3.18 A and with a radius of 1.71 mm can be calculated as follows:Given,R = 1.71 mm = 0.00171 mI = 3.18 An = 1.10 × 10²⁹ electrons/m³We know that, v_d = (I/nAq), where q is the charge of an electron and A is the cross-sectional area of the wire. Here, the cross-sectional area of the wire (A) can be calculated as follows:A = πR²= π × (0.00171 m)²= 9.15 × 10⁻⁶ m²

Substituting the given values in the formula for drift speed, we get:v_d = (I/nAq)= (3.18 A)/(1.10 × 10²⁹ electrons/m³ × 9.15 × 10⁻⁶ m² × 1.6 × 10⁻¹⁹ C/electron)= 0.002 m/sTherefore, the drift speed of electrons in a copper wire carrying a current of 3.18 A and with a radius of 1.71 mm is 0.002 m/s.

(b) The drift speed of electrons in an aluminum wire carrying a current of 3.18 A and with the same radius as the copper wire (i.e., 1.71 mm or 0.00171 m) can be calculated as follows:Given,n = 2.11 × 10²⁹ electrons/m³We know that, v_d = (I/nAq), where q is the charge of an electron and A is the cross-sectional area of the wire. Here, the cross-sectional area of the wire (A) is the same as that of the copper wire, i.e., A = 9.15 × 10⁻⁶ m².

Substituting the given values in the formula for drift speed, we get:v_d = (I/nAq)= (3.18 A)/(2.11 × 10²⁹ electrons/m³ × 9.15 × 10⁻⁶ m² × 1.6 × 10⁻¹⁹ C/electron)= 0.001 m/sTherefore, the drift speed of electrons in an aluminum wire carrying a current of 3.18 A and with the same radius as the copper wire (i.e., 1.71 mm or 0.00171 m) is 0.001 m/s.

Learn more about electrons here,

https://brainly.com/question/860094

#SPJ11

A heat lamp emits infrared radiation whose rms electric field is Erms = 3600 N/C. (a) What is the average intensity of the radiation? (b) The radiation is focused on a person's leg over a circular area of radius 4.0 cm. What is the average power delivered to the leg? (c) The portion of the leg being irradiated has a mass of 0.24 kg and a specific heat capacity of 3500 J/(kg⋅C°). How long does it take to raise its temperature by 1.9C°. Assume that there is no other heat transfer into or out of the portion of the leg being heated. (a) Number _____________ Units _____________
(b) Number _____________ Units _____________ (c) Number _____________ Units _____________

Answers

(a)  The average intensity of the radiation is 4.33 x 10^-6; Units = W/m^2

(b) The average power is 2.64 x 10^1; Units = W

(c) The time taken to raise the temperature of the leg is 3.13 x 10^1; Units = s

(a)

A heat lamp emits infrared radiation whose rms electric field is Erms = 3600 N/C. We can calculate the average intensity of the radiation as follows:

The equation to calculate the average intensity is given below:

Average intensity = [ Erms² / 2μ₀ ]

The formula for electric constant (μ₀) is:μ₀ = 4π × 10^-7 T ⋅ m / A

Thus, the average intensity is given by:

Averag intensity = [(3600 N/C)² / (2 × 4π × 10^-7 T ⋅ m / A)]

                           = 4.33 × 10^-6 W/m²

(b)

The formula to calculate the average power delivered to the leg is given below:

Average power = [Average intensity × (area irradiated)]

The area irradiated is given as:

Area irradiated = πr²

Thus, the average power is given by:

Average power = [4.33 × 10^-6 W/m² × π × (0.04 m)²]

                          = 2.64 × 10¹ W

(c)

The equation to calculate the time taken to raise the temperature of the leg is given below:

Q = m × c × ΔTt = ΔT × (m × c) / P

Where

Q is the amount of heat,

m is the mass of the leg portion,

c is the specific heat capacity of the leg,

ΔT is the temperature difference,

P is the power given by the lamp.

Now we need to find the amount of heat.

The formula to calculate the heat energy is given below:

Q = m × c × ΔT

Thus, the amount of heat energy required to raise the temperature of the leg is given by:

Q = (0.24 kg) × (3500 J / kg °C) × (1.9 °C)

   = 1.592 kJ

Thus, the time taken to raise the temperature of the leg is given by:

t = ΔT × (m × c) / P

 = (1.9 °C) × [(0.24 kg) × (3500 J / kg °C)] / (2.64 × 10¹ W)

t = 3.13 × 10¹ s

Therefore, the values are:

(a) Number 4.33 × 10^-6 Units W/m²

(b) Number 2.64 × 10¹ Units W

(c) Number 3.13 × 10¹ Units s.

Learn more about the average intensity:

brainly.com/question/29526985

#SPJ11

Considering motion with a constant velocity, what happens to changes in distance during equal time intervals? (1 mark) Considering motion with a non-constant velocity, what happens to changes in distance during equal time internals? (1 mark) You run 100 meters in 15 seconds. What is your speed in m/s? (1 mark) 9. In a race, you run 3000 meters east in 21 minutes. What is your speed in km/min? (2 marks) 10. What is the difference between velocity and speed? Give an example. (2 marks)

Answers

Considering motion with a constant velocity, changes in distance are equal during equal time intervals. Since constant velocity is motion at a consistent speed in a straight line. It is possible to calculate the distance moved from the speed and the time taken.

Distance is equal to the product of speed and time: distance = speed × time. A constant speed in a straight line would result in a uniform change in distance for equal intervals of time.Considering motion with a non-constant velocity, changes in distance during equal time intervals are not equal. Since the velocity changes during non-constant velocity. Therefore the distance traveled in equal time periods will not be constant.

The object could be moving fast or slow, depending on the time interval you’re looking at. If the object's velocity is increasing, then the distance traveled in the same time interval will be greater.Speed is the rate at which an object travels from one place to another. It can be calculated by dividing distance by time.

In this case, speed = distance/time.100 meters in 15 seconds, speed = distance/time = 100/15 = 6.67 m/sIn 21 minutes, you ran 3000 meters east. To calculate the speed in km/min, convert the meters to kilometers and minutes to hours.

1 km = 1000 m and 1 hour = 60 minutes, therefore 3000 m = 3 km and 21 minutes = 21/60 = 0.35 hours.Speed = distance/time = 3/0.35 = 8.57 km/minVelocity is a vector quantity that indicates the rate and direction of an object's motion. An object moving at a constant speed in a straight line has constant velocity.

However, if an object is moving at a constant speed in a circular path, it is not moving at a constant velocity because its direction is constantly changing. For example, if a car is moving at 60 mph north, its velocity is 60 mph north. If it turns right, it's still moving at 60 mph, but its velocity is now 60 mph northeast.

Learn more about Speed here,

https://brainly.com/question/13943409

#SPJ11

Which of the following statements is correct? □ a. In Compton effect, electrons are dislodged from the inner-most shells b. Pair production can not happen in free space DC Compton effect is the scattering between electrons and photons in which photons undergo change in wavelength d. Compton effect demonstrates wave nature

Answers

The, option d is the correct statement as the Compton effect is a demonstration of the wave nature of electromagnetic radiation.

The Compton effect refers to the scattering of photons by electrons, which results in a change in the wavelength of the scattered photons. This phenomenon provides evidence for the wave-particle duality of electromagnetic radiation, supporting the idea that photons possess both particle-like and wave-like properties.

Option a is incorrect because in the Compton effect, electrons are not dislodged from the inner-most shells of atoms. Instead, the electrons involved in the scattering process remain bound within their respective atoms.

Option b is incorrect because pair production can occur in free space. Pair production refers to the creation of a particle-antiparticle pair from the energy of a photon in the presence of a nucleus or another particle.

Option c is incorrect because the Compton effect involves the scattering of photons by electrons, resulting in a change in the wavelength of the photons, rather than the production of new particles.

Learn more about electromagnetic radiation here:

https://brainly.com/question/29389010

#SPJ11

Find the total resistance of the combination of resistors
if A=150 Ω , B=730 Ω,, and C=370Ω .
A B C are side to side
Ω=

Answers

The total resistance of the combination of resistors is 1250 Ω.

To get the total resistance of a combination of resistors that are connected in a row, it is essential to follow these two steps:Add all the resistors values together to get the equivalent resistance. In this case,

AB = A + B = 150 Ω + 730 Ω = 880 Ω ABC = AB + C = 880 Ω + 370 Ω = 1250 Ω

Therefore, the total resistance of the combination of resistors is 1250 Ω.

This means that the flow of current through the resistors will face the resistance of 1250 Ω, which will limit the flow of the current to some extent.

Know more about resistance here,

https://brainly.com/question/32301085

#SPJ11

Other Questions
This excerpt is taken from a letter written by a father to his son."Do not think that I mean to dictate as a parent; I only mean to advise as a friend, and an indulgent one too: and do not apprehend that I mean to check your pleasures; of which, on the contrary, I only desire to be the guide, not the censor. Let my experience supply your want of it, and clear your way in the progress of your youth of those thorns and briers which scratched and disfigured me in the course of mine."The tone of this excerpt can best be described as (5 points)compromising and tenderscathing and unapologeticconciliatory and humbleindignant and regretfulhopeful and conversational Please help Compute the absolute maximum bending moment developed on the span of a 30 m simple span RC girder over a bridge, due to the moving loads shown in Fig. Q. S(b). Discuss the role of gender stereotypes in a child'sdevelopment. In the first paragraph, Rohrbach writes: "Just 10 years ago I supported a six-cent fuel tax increase, and we're worse off now than we were then." What was Rohrbach's purpose in adding this sentence? A. To show that tax increases don't always improve what the government says it will improve B. To demonstrate that some tax increases are good for Missouri C. To encourage Missourians to buy less gas D. To prove that he has lived in Missouri for over ten years Create a database using PHPMyAdmin, name the database bookstore. The database may consist of the following tables: tblUser tblAdmin tblAorder tblBooksor use the ERD tables you created in Part 1. Simplify the design by analysing the relationships among the tables. Ensure that you create the necessary primary keys and foreign keys coding the constraints as dictated by the ERD design. What is the answer to part a: question 1 for Building a Borderless World? On 15 June 2021, during the United Nations Global Compact virtual Leaders Summit, Inger Anderson, Under-Secretary-General of the United Nations and Executive Director of the UN Environment Programme emphasised, "But there can be no profit, if there is no planet. Backing sustainability is the only sensible way to boost the corporate bottom line and to make everyones lives better. And the private sector needs to lead the way." Critically analyse this statement by discussing the extent to which you think the private sector should and can lead the way for a sustainable future? Explain your reasoning by drawing on relevant academic literature and examples. how to do an invitation card Your client is 34 years old. She wants to begin saving for retirement, with the first payment to come one year from now. She can save $8,000 per year, and you advise her to invest it in the stock market, which you expect to provide an average return of 8% in the future. a. If she follows your advice, how much money will she have at 65? Do not round intermediate calculations. Round your answer to the nearest cent. $ b. How much will she have at 70 ? Do not round intermediate calculations. Round your answer to the nearest cent. $ c. She expects to live for 20 years if she retires at 65 and for 15 years if she retires at 70 . If her investments continue to earn the same rate, how much nearest cent. Annual withdrawals if she retires at 65: $ Annual withdrawals if she retires at 70:$ A solution contains 4.82 g of chloroform (CHCl3) and 9.01 g of acetone (CH3COCH3). The vapor pressures at 35 C of pure chloroform and pure acetone are 295 and 332 torr, respectively.Assuming ideal behavior, calculate the vapor pressure of chloroform. 52.Which of the following is linked to cardiovascular disease:Group of answer choicesuncotrollable anger and ragehostilityanxietydepression Explain another method which is similar to nuclear densitometerthat uses different principle in determining on-site compaction.Explain the equipment and the working principles. An unfortunate astronaut loses his grip during a spacewalk and finds himself floating away from the space station, carrying only a rope and a bag of tools. First he tries to throw a rope to his fellow astronaut, but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of a=102 kg and the bag of tools has a mass of b=10.0 kg. If the astronaut is moving away from the space station at i=1.50 m/s initially, what is the minimum final speed b,f of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever? flask to the mark with water. Calculate the cencentration in tamoli. of the chemist's ironiII) bromide solution. Round your answer to 2 significant digits. Suppose the following information (in millions of dollars) is available for Limited Brands for a recent year: sales revenue $8,740, net income $312, preferred dividend $0, and weighted-average common shares outstanding 400 million. Compute the earnings per share for Limited Brands. (Round answer to 2 decimal places, e.g. 15.25.) Earnings pershare $ An individual is innately motivated to be competent in human achievement" is a premise of what theory? Multidimensional model of sport confidence Psychological momentum in sport Cognitive evaluation theory Self-efficacy theory O Competence motivation theory write an executive summary for bel aqua marketing strategy A bird flying horizontally accidentally drops a rock it was carrying. 2.10 s later, the rock's velocity is 22.2 m/s in a -68.2 direction. What was the bird's (and rock's) initial velocity? (Unit = m/s) (Hint: the rock was originally moving with the bird.) Figure 1 shows the internal circuitry for a charger prototype. You, the development engineer, are required to do an electrical analysis of the circuit by hand to assess the operation of the charger on different loads. The two output terminals of this linear device are across the resistor, R. You decide to reduce the complex circuit to an equivalent circuit for easier analysis. i) Find the Thevenin equivalent circuit for the network shown in Figure 1, looking into the circuit from the load terminals AB. (9 marks) R1 A R2 ww 40 30 20 V R460 RL B Figure 1 ii) Determine the maximum power that can be transferred to the load from the circuit. (4 marks) 4 10A R330