The hypothesis that was incorrect in Helmont's experiment was "Plants get their mass from soil."Helmont believed that plants get their mass from soil. He planted a willow tree in a pot, watered it for five years, then weighed the plant and the soil.
The plant was much heavier than it had been, but the soil had lost very little mass. This resulted in the conclusion that soil was not the source of the plant's mass. Plants get their mass from water and air. Nitrogen, phosphorus, and potassium are the three macronutrients that plants absorb. Starch, glucose, and oxygen are not nutrients absorbed by plants.
Phosphorus is beneficial to humans in the following ways:It helps with the growth and repair of tissues and cells.It helps to keep bones and teeth healthy, as well as to make DNA.It helps to filter out waste from the kidneys and helps the body to store energy.5. Transpiration is the process by which plants release water vapor through the small pores, known as stomata, in their leaves. It is an important mechanism for plants to transport water from their roots to other parts of the plant. Transpiration helps to regulate the temperature of the plant and also helps to move minerals and other nutrients throughout the plant.
To know more about hypothesis visit :
https://brainly.com/question/32562440
#SPJ11
what is the process of water moving from an area of low solute concentration to an area of high solute concentration?
Explanation:
Osmosis is a passive transport process during which water moves from areas where solutes are less concentrated to areas where they are more concentrated.
hope it helps you
please mark as brainliest
Once you print, cut all the pieces apart. Then reassemble the puzzle so the the definition backs up with the card that has the term. So if one card says: double helix, the card that matches with it would say: the shape of DNA.
DNA replication is the process through which DNA duplicates. It occurs in the interphase and involves different enzymes, DNA molecules, and free nucleotides. Terms and definitions in the attached files.
What is DNA replication?
DNA replication is the process through which DNI molecule duplicates. This event takes place during the S stage of the interphase. So when the cell divides during mitosis or meiosis, each cell will get a complete set of chromosomes.
DNI replication is semi-conservative because each new molecule carries an original DNI strand and a new one. The fact that the new molecule is composed of an original strand makes it semi-conservative. The old existing strands are used to synthesize the new complementary strand.
The origin of the replication requires helicase enzymes to break hydrogen bonds and separate the two original strands. The topoisomerase enzyme is necessary to release tension. Other proteins are also needed to join the strains and keep them separated. Once the molecule is opened, there is a region named replication forks. DNA polymerase makes the new nucleotides enter into the fork and pairs them with the corresponding nucleotide of the original strand. Adenine pairs timine, and cytosine pairs guanine.
DNA strands are antiparallel, and replication occurs only in 5'-3' direction. So one of the strands will replicate continuously, while the other strain will be formed by short fragments known as Okazaki fragments.
Primers are needed to make the DNA polymerase work. Primers are small units of RNA and are placed at the beginning of each new fragment.
In the attached files you will find the terms and their definitions.
You can learn more about replication at
https://brainly.com/question/29398205
#SPJ1
Identify the input energy converter and two output energies involved in a student eats a hamburger
The input energy converter is Student's digestive system and the two output energies involved in a student eats a hamburger are mechanical energy, thermal energy.
In the context of a pupil ingesting a hamburger, allow perceive the enter energy converter and output energies concerned with this technique.
The enter power converter on this scenario might be the pupil's frame, in particular the digestive system. The act of eating includes the conversion of capability power within the food into chemical strength thru the technique of digestion. The digestive device breaks down the complicated molecules inside the hamburger into much less difficult paperwork that may be absorbed and utilized by the body.
As for the output energies, actually one in every of them is mechanical electricity. When the student chews and swallows the hamburger, the digestive device converts the chemical power received from the meals into mechanical power to help in propelling the meals thru the digestive tract.
Another output power is thermal electricity. During digestion, the chemical reactions that stand up to break down the meals launch warmth power. This thermal electricity contributes to preserving the student's body temperature and is eventually dissipated into the surroundings.
To summarize:
Input energy converter: Student's digestive system
Output energies:
Mechanical energy - worried with the method of chewing and propelling food via the digestive tract.
Thermal energy - is launched as a byproduct of the chemical reactions for the duration of digestion, contributing to body temperature upkeep.
Read more about energy transformations at:
https://brainly.com/question/3111563
Several biological theories of aging have emerged over the past 40 years. Summarize and then critique each theory and then discuss how it advances our understanding of the aging process and its potential for reversing that process. Provide three examples of normal, age‑related changes in visual functioning and three examples of pathological aging. To what extent can environmental interventions aid the older person undergoing these changes?
Environmental interventions can effectively compensate for age-related changes, enhance independence, and improve overall quality of life. Consulting with healthcare professionals, including ophthalmologists, optometrists, and occupational therapists, can provide tailored recommendations and guidance based on individual needs.
Several biological theories of aging have been proposed to explain the aging process. Here, I will summarize and critique each theory and discuss how they advance our understanding of aging and the potential for reversing the aging process.
Telomere Theory of Aging: This theory suggests that aging is driven by the shortening of telomeres, which are protective caps at the ends of chromosomes. Each time a cell divides, the telomeres shorten, eventually leading to cellular senescence and aging. However, this theory has limitations as not all cells exhibit telomere shortening, and some species with short telomeres have long lifespans.
Free Radical Theory of Aging: This theory proposes that accumulated damage from free radicals, which are highly reactive molecules, contributes to aging. Free radicals can cause oxidative stress and damage DNA, proteins, and other cellular components. While oxidative stress does play a role in aging, recent research suggests that it is not the sole cause, and some organisms with high oxidative stress levels still exhibit longevity.
Mitochondrial Theory of Aging: This theory suggests that aging is caused by the accumulation of mitochondrial damage over time. Mitochondria are responsible for producing energy in cells, but they also generate reactive oxygen species (ROS) as byproducts, leading to oxidative damage. The decline in mitochondrial function is thought to contribute to aging. However, the extent to which mitochondrial dysfunction directly causes aging is still under investigation.
Hormonal Theories of Aging: These theories propose that changes in hormone levels contribute to the aging process. For example, the decline in reproductive hormones, such as estrogen and testosterone, is associated with age-related changes. However, the causal relationship between hormonal changes and aging is not fully understood.
Immunological Theory of Aging: This theory suggests that age-related changes in the immune system, such as decreased immune response and increased inflammation, contribute to aging. The decline in immune function can lead to increased susceptibility to diseases and impaired wound healing.
While these theories provide insights into the aging process, it is important to note that aging is a complex and multifactorial phenomenon. It is likely influenced by a combination of genetic, environmental, and lifestyle factors. Reversing the aging process entirely is currently beyond our capabilities, but research is ongoing to understand and potentially slow down aspects of aging.
Examples of normal age-related changes in visual functioning include:
Presbyopia: This is the natural age-related loss of near focusing ability, resulting in difficulty seeing close objects clearly.
Reduced pupil size: The pupil becomes smaller and less responsive to changes in light, leading to decreased visual acuity in low-light conditions.
Decreased color vision: Aging can affect the perception of colors, particularly distinguishing between shades of blue and green.
Examples of pathological aging in visual functioning include:
Age-related macular degeneration (AMD): This is a progressive eye condition that affects the macula, leading to central vision loss.
Cataracts: Cataracts occur when the lens of the eye becomes cloudy, causing blurred or cloudy vision.
Glaucoma: Glaucoma is a group of eye diseases that damage the optic nerve, leading to vision loss and blindness if left untreated.
To know more Environmental interventions
https://brainly.com/question/31331912
#SPJ11
Which of the following are TRUE statement regarding biomes? Select all that apply. There are 120 different biomes on the planet There are 6 different biomes on the plant Biomes have defined boundaries call biome gradients Biomes have no specifically defined boundaries Biomes are at the top of the hierarchy of life Question 45 2 pts Which are abiotic components? Select all that apply. Acidity Animals Humidity Oxygen Sunlight Bacteria Fungi
Answer:
The true statements regarding biomes are:
Biomes have defined boundaries call biome gradientsBiomes have no specifically defined boundariesExplanation:
Biomes are broad categories of ecosystems defined by the communities of plants and animals they contain, and by their characteristic physical environments such as soil type, climate, and geography. Some key points:
There are many biomes on Earth, with estimates ranging from 20 to over 120 depending on classification schemes. There is no definitive number of 6 biomes.Biomes do have conceptual boundaries defined by changes in dominant vegetation and climate. However, the boundaries between biomes are gradual zones called ecotones or biome gradients, rather than sharp lines.-Biomes are not at the top of the hierarchy of life. They sit between larger scales like biogeographic regions and smaller scales like ecosystems and habitats.
For the second question, the abiotic components listed are:
AcidityHumidityOxygenSunlightAbiotic components refer to non-living physical and chemical factors that influence organisms and ecosystems. They include things like soil, climate, sunlight, and water. Animals, bacteria and fungi are biotic components - living parts of an ecosystem.
Which of the following is pivotal to engineered water pollution control systems? Consumers Producers Decomposers Bottom feeders Question 8 Which of the following is an effect of water pollution? Reduction of dissolved oxygen level Increase in dissolved oxygen level None of the options provided Stability of dissolved oxygen level
1. Among the options provided, decomposers are pivotal to engineered water pollution control systems, option C is correct.
2. An effect of water pollution is the reduction of dissolved oxygen levels, option A is correct
1. Decomposers play a crucial role in breaking down organic matter, such as pollutants and waste, in aquatic environments. They help in the natural recycling process by decomposing organic pollutants into simpler forms, which reduces their harmful effects on water quality. Decomposers, such as bacteria and fungi, contribute to the breakdown and removal of pollutants, aiding in the restoration and maintenance of a balanced ecosystem within engineered water pollution control systems, option C is correct.
2. Water pollution, particularly from sources like industrial discharge and excessive nutrient runoff, can lead to an overgrowth of algae and other aquatic plants. As these plants die and decompose, they consume oxygen in the water, resulting in a decrease in dissolved oxygen levels. Insufficient dissolved oxygen can harm aquatic organisms, such as fish and other marine life, which depend on oxygen to survive, option A is correct.
To learn more about decomposers follow the link:
https://brainly.com/question/33382684
#SPJ4
The correct question is:
1. Which of the following is pivotal to engineered water pollution control systems?
A. Consumers
B. Producers
C. Decomposers
D, Bottom feeders
2. Which of the following is an effect of water pollution?
A. Reduction of dissolved oxygen level
B. Increase in dissolved oxygen level
C. None of the options provided
D. Stability of dissolved oxygen level
) Arrange the statements in order of events.
A) As the molecules increase in speed and the number of collision increase, the space between molecules increases.
B) As the volume of the air increase, the density of the air decreases.
C) Air molecules absorb insolation, become energized, and temperature increases.
D) By moving faster, air molecules collide more frequently and energetically.
E) as the temperature of the molecules increase, they move faster. '
F) The air molecules move up in altitude away from the earth's surface.
2)Arrange the statements in order of events
A) Only when temperatures fall below the dew point temperature can condensation begin.
B) at higher altitudes, the temperatures drop below dew point temperatures.
C) As warm moist air continues to move upward, the temperatures continues to decrease.
D) precipitation begin
E) condenstation continues and the size of the liquid water droplets within the cloud increases
1. The correct order of events for movement of air molecules the statements is as follows: E) → D) → A) → C) → B) → F).
2. The correct order of events for condensation and precipitation the statements is as follows: C) → B) → A) → E) → D).
1. The correct order of events for the statements is as follows:
The initial step where the air molecules gain energy from the absorbed insolation, leading to an increase in temperature. The relationship between temperature and molecular motion, indicating that higher temperature results in faster molecular movement. The increased speed of the molecules leads to more frequent and energetic collisions between them. Due to the increased speed and collisions, the molecules spread out, creating more space between them. Increased energy and collisions, the air molecules move upwards in the atmosphere, away from the surface of the Earth. The relationship between volume and density, stating that when the volume of air expands due to increased molecular movement, the density decreases, correct order is E) → D) → A) → C) → B) → F).
2. The correct order of events for the statements is as follows:
The process of warm moist air rising and encountering cooler temperatures as it ascends. The air rises to higher altitudes, it encounters temperatures that fall below the dew point temperature, which is necessary for condensation to occur. The requirement for temperatures to reach the dew point temperature before condensation can take place. After the initial condensation begins, the process continues, resulting in the growth of liquid water droplets within the cloud. Once the liquid water droplets within the cloud reach a sufficient size, gravity causes them to fall from the cloud as precipitation, such as rain, snow, or hail, correct order is C) → B) → A) → E) → D).
To learn more about condensation follow the link:
https://brainly.com/question/22967771
#SPJ4
The correct question is:
1. Arrange the statements in order of events for movement of air molecules:
A) As the molecules increase in speed and the number of collision increase, the space between molecules increases.
B) As the volume of the air increase, the density of the air decreases.
C) Air molecules absorb insolation, become energized, and temperature increases.
D) By moving faster, air molecules collide more frequently and energetically.
E) as the temperature of the molecules increase, they move faster. '
F) The air molecules move up in altitude away from the earth's surface.
2. Arrange the statements in order of events for condensation and precipitation:
A) Only when temperatures fall below the dew point temperature can condensation begin.
B) at higher altitudes, the temperatures drop below dew point temperatures.
C) As warm moist air continues to move upward, the temperatures continues to decrease.
D) precipitation begin
E) condenstation continues and the size of the liquid water droplets within the cloud increases
HELP PLS: NEED ANSWER ASAPPPPPPPPPPPP <3
1. Explain acid deposition. Your explanation should include the following:
• The sources of acid deposition
• The chemical equations involved in acid deposition formation
• An explanation of the types of acid deposition
• A discussion of the effects of acid deposition
• A drawing that shows the sources, formation, and precipitation of acid deposition
Acid deposition is the deposition of acidic compounds from the atmosphere to the Earth's surface. It is caused by natural sources like volcanoes and human activities such as burning fossil fuels. Chemical equations include [tex]SO_2[/tex] + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]H_2SO_4[/tex] and NOx + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]HNO_3[/tex]. Acid deposition can be wet or dry, harming ecosystems and causing damage to structures. The effects of acid deposition are far-reaching. It can lead to the acidification of lakes, rivers, and soils, which can harm aquatic ecosystems and affect the growth and survival of plants and animals. Acid deposition can also damage buildings, statues, and monuments made of limestone or marble, as these materials are particularly susceptible to erosion by acids.
Acid deposition refers to the deposition of acidic compounds from the atmosphere onto the Earth's surface.
Sources of acid deposition include natural sources like volcanic emissions and the oxidation of sulfur and nitrogen compounds, as well as human activities like burning fossil fuels.
The chemical equations involved in acid deposition formation are:
a. Formation of sulfuric acid: [tex]SO_2[/tex] + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]H_2SO_4[/tex]
b. Formation of nitric acid: NOx + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]HNO_3[/tex]
Acid deposition can be classified into two types: wet deposition and dry deposition.
a. Wet deposition occurs when acidic pollutants dissolve in precipitation and are deposited onto the Earth's surface.
b. Dry deposition happens when acidic particles and gases settle directly onto the ground or other surfaces without being dissolved in precipitation.
The effects of acid deposition include the acidification of lakes, rivers, and soils, which can harm aquatic ecosystems and affect plant and animal life. It can also cause damage to buildings, statues, and monuments made of limestone or marble.
A visual representation of the sources, formation, and precipitation of acid deposition can be illustrated through a diagram or drawing. This can show the emission sources, chemical reactions, and the deposition of acidic compounds onto the Earth's surface.
For more such questions on Acid deposition click on:
https://brainly.com/question/30433113
#SPJ8
which substance is a product of cellular respiration but not fermenation
Answer:
Water
Explanation:
What is one reason a population's distribution of traits might e perience little to no change over a long period of time?
• A. A high amount of competition exists in the environment.
• B. The environment remains relatively stable.
• C. New abiotic factors are introduced regularly.
• D. The population has a large amount of genetic variation
Answer:
The correct answer is B. The environment remaining relatively stable is one reason a population's distribution of traits might experience little to no change over a long period of time. In a stable environment, the selective pressures acting upon a population may not change significantly, leading to little adaptive change in the population's traits. Conversely, a highly unstable environment with constantly changing selective pressures can lead to rapid evolutionary change in a population.
Explanation:
cellular respiration
summary
Answer:
Cellular Respiration is a process in which the cell turns glucose into ATP ( adenosine triphosaphate ) which is the cells energy. ATP is when 3 phosphate groups break apart creating glucose and energy. There are two types of respiration ; Aerobic Respiration and Anaerobic Respiration. Aerobic Respiration requires oxygen and Anerobic doesn’t. Anaerobic Respiration creates a small amount of the cell’s energy and Aerobic Respiration creates most of the energy used to function.
The first step of Cellular Respiration, regardless of whether it is aerobic on anaerobic, is when the glucose breaks down into a smaller molecule called pyruvate. Pyruvate consists 3 carbon atoms, 3 hydogen atoms, and 3 oxygen atoms. Glucose consists of 6 carbon atoms, 12 hydrogen atoms, 6 oxygen atoms. 1 glucose can make 2 pyruvate.
If oxygen is not present after pyruvate is created, the molecule undergoes the first step of anaerobic respiration, which is fermentation. Fermentation is when pyruvate goes though a specific process and creates a small amount of ATP and a byproduct. The byproduct for animals is Lactic acid. The byproduct for bacteria and yeast is ethanol. This is Anaerobic Respiration.
If oxygen is present after pyruvate is created, it enters Aerobic Respirations. Pyruvate is transported to the matrix of the mitochondria, where it starts the Krebs Cycle also known as the ‘Citric Acid Cycle’. The Krebs Cycle was founded by Hans Krebs, a biologist, physician, and biochemist in 1937. The Krebs cycle turns pyruvate into high energy electrons. These electron are then diffused throughout the mitochondria. Diffusion is when some goes from a higher concentration to a lower concentration. The process of diffusion of these electrons is called Chemiosmosis. Then those electrons are transported, by electron carriers to the ETC is the electron transport chain. The ETC transports these electron to the last step of Aerobic Respiration which is ATP Synthase. ATP synthase is basically like a gate. The electrons travel through the gate, and they start to turn like a waterwheel. By rotating they create ATP, which is the whole reason Cellular Respiration takes place. Then the leftover oxygen and electrons are attracted to each other and they combine. They go though a cochair made of proteins. This chaos exists to transports these molecules. The proteins suck the energy from the molecules and then release hydrogen and carbon. Now the oxygen and hydrogen and carbon create water. The whole process of diffusion, chemiosmosis, ETC, ATP Synthase and the creation of water is called Oxidative Phosphorylation.
This is Cellular Respiration.
Explanation:
SHORT ANSWER: Discuss what happens when there are excess algal blooms in lakes (known as eutrophication). What might be the causes, the chemical reactions associated with such blooms, and the negative effects of this on lakes.
Excess algal blooms in lakes, also known as eutrophication, occurs when there is an overabundance of nutrients such as nitrogen and phosphorus in the water. These nutrients can come from a variety of sources, including agricultural runoff, sewage discharge, and urban stormwater runoff. When there is an excess of nutrients in the water, it can lead to an increase in the growth of algae and other aquatic plants. As these plants die and decompose, the bacteria that break them down consume oxygen from the water. This can lead to a decrease in the amount of dissolved oxygen in the water, which can have negative effects on aquatic life. The chemical reactions associated with excess algal blooms involve the uptake of nutrients by the algae and their subsequent growth and reproduction. Algae use nitrogen and phosphorus as essential nutrients for photosynthesis and growth. As the algae grow and reproduce, they consume more and more of the available nutrients, which can lead to the depletion of these nutrients in the water. The negative effects of eutrophication on lakes can include a decrease in water clarity, an increase in the growth of harmful algal blooms, and a decrease in the amount of dissolved oxygen in the water. This can lead to the death of fish and other aquatic organisms, as well as the loss of recreational opportunities such as swimming and fishing. In addition, the presence of harmful algal blooms can pose a risk to human health, as some species of algae can produce toxins that are harmful to humans and animals.
After many generations, an insect species evolved resistance to a particular pesticide. This occurred because spraying pesticides
Insects that are exposed to pesticides and survive can build up resistance to that pesticide over time. When these resistant insects mate, they pass on their genetic traits for resistance to their offspring, making the next generation more resistant to the pesticide.
The frequency of resistant individuals in the population increases each generation, and eventually, the majority of the population becomes resistant to the pesticide. This process is known as natural selection. It is important to note that not all insects will develop resistance to pesticides, and not all populations will become resistant. However, if an insecticide is used heavily and repeatedly, the likelihood of resistance developing increases. Resistance can also develop more quickly if the pesticide is not used correctly or if the insects are exposed to sub-lethal doses of the pesticide, allowing them to build up resistance without being killed.
In summary, spraying pesticides can cause natural selection to favor insects with genetic traits that make them resistant to the pesticide. Over time, the frequency of these resistant individuals in the population increases, and the population as a whole becomes more resistant.
Know more about genetic traits here:
https://brainly.com/question/24113833
#SPJ8
what are two types of cells found in plant dermal tissue
Answer:
Guard cells and Epidermal cells
Explanation:
Epidermal cells: These are the outermost layer of cells in the plant's epidermis. Epidermal cells are typically flat and form a continuous layer that covers the aerial parts of the plant, including leaves, stems, and roots. They serve as a protective barrier against physical damage, water loss, and pathogen invasion. Epidermal cells may have specialized structures such as stomata (pores for gas exchange) and trichomes (hair-like structures).
Guard cells: Guard cells are specialized epidermal cells that surround and control the opening and closing of stomata. They are typically bean-shaped and contain chloroplasts. By regulating the opening and closing of stomata, guard cells help regulate gas exchange (such as the uptake of carbon dioxide and release of oxygen) and control water loss through transpiration. The movement of guard cells is influenced by various environmental factors, including light intensity, humidity, and plant hormones.
Which term describes a single female arctic The group of polar bears that live along the eastern coast of Russia makes upfox?
The term that describes a single female arctic fox is a vixen.
A vixen is a female fox, including the arctic fox, that is not pregnant or nursing young. It belongs to the Canidae family and is found in the tundra and other Arctic regions of the Northern Hemisphere.The Arctic fox is a small, compact, and sturdy mammal that can survive in some of the world's harshest environments.
The population of Arctic foxes that lives along the eastern coast of Russia is not referred to as a group of polar bears. It is known as a population, a community, or a family.A population is a group of animals of the same species that live in the same area and interact with one another.
A family of arctic foxes is made up of a male and female adult and their offspring. They live together in underground dens that are used for shelter and protection.Arctic foxes are considered a keystone species in the Arctic region because they play a crucial role in the ecosystem. They feed on small animals like lemmings and voles, which helps to regulate their populations. In addition, they are a food source for larger predators like wolves and polar bears, which helps to maintain balance in the food web.
For more such questions on arctic fox, visit:
https://brainly.com/question/27754416
#SPJ8
Amazon prime video is a subscription video on demand leetcode
1. Riparian vegetation limits meandering, causing downcutting and a reduced water table.
True / False
2. A guild is a fish feeding classification based on where they reproduce in water column
True / False
3. A primary producer is defined as a living organism such as algae that can convert nutrients, carbon dioxide, water and energy from the sun into living matter.
True / False
4. In riparian areas, soil acts like a sponge to retain water .
True / False
5. Feeding relationships of organisms determine the pathways of energy flow through the aquatic system
True / False
6. The total area drained by a stream or river is called a:
a) landscape
b) catchment
c) riparian zone
d) hydrologic cycle
7. Benthic refers to the assemblage of organisms inhabiting the bottoms of streams, lakes, and ocean.
True / False
The statement is true. Riparian vegetation limits meandering, causing downcutting and a reduced water table. In areas where vegetation has been removed, the riverbank may be eroded due to increased water flow. The given statement is false. A guild is a fish feeding classification based on the type of food they eat.
The given statement is true. A primary producer is defined as a living organism such as algae that can convert nutrients, carbon dioxide, water and energy from the sun into living matter. The given statement is true. In riparian areas, soil acts like a sponge to retain water. Riparian vegetation can help to increase soil permeability, which in turn helps to reduce the speed of water flow and prevent soil erosion. The given statement is true. Feeding relationships of organisms determine the pathways of energy flow through the aquatic system.
Organisms in the lower trophic levels are eaten by those in the higher trophic levels. This process continues until the top predator in the food chain is reached. The total area drained by a stream or river is called a catchment. The catchment includes all the water that flows into the stream or river, including surface runoff, subsurface flow, and groundwater. The given statement is true. Benthic refers to the assemblage of organisms inhabiting the bottoms of streams, lakes, and ocean.
To know more about vegetation visit:
https://brainly.com/question/28405832
#SPJ11
what are long whiplike extensions used to move the protists to the nutrients it needs?
Flagellum are long whip-like extensions used to move the protists to the nutrients needed.
Questions refer to David Attenborough's book "A Life on Our Planet"
1. David Attenborough is able to simplify complex ideas about biodiversity and the enviorment. Sometimes he does this by creating camparisons and associations with other ideas we are comfortable with. Sometimes he just simplifies a complex notion with clear thinking and simple words. Please provide a passage where he achieves this.
David Attenborough is a British natural historian, television presenter, and writer. In his book "A Life on Our Planet," he describes a variety of topics related to the environment and biodiversity. One of his notable characteristics is his ability to simplify complex ideas for his readers.
To illustrate this point, let's consider a passage from his book where he has simplified the complex idea with clear thinking and simple words. In his book, David Attenborough compares the human population to the fungal network of the forest. The fungal network, which is made up of a complex system of roots and fungi, functions as a communicative network for the forest's trees. In this context, the forest's trees are dependent on the network, and the network is dependent on the trees. In the same way, the human population is dependent on the natural world for its existence. However, human activities have put a strain on the natural world, and this has had adverse effects on the planet. Just like the fungal network is dependent on the trees, and the trees are dependent on the network, human beings are dependent on the environment, and the environment is dependent on human beings. David Attenborough's comparison of the human population to the fungal network is an excellent example of his ability to simplify complex ideas by creating associations with other ideas that we are comfortable with.
In this passage, he has conveyed the complex relationship between humans and the environment in a clear and simple way. Attenborough also describes how biodiversity is related to the planet's health and prosperity. According to him, biodiversity is a measure of the variety of living things that exist in an ecosystem. In his book, he notes that human activities have put a strain on the planet's biodiversity. The result has been a reduction in the number of species, which has had adverse effects on the planet's ecosystems. He goes on to explain that the reduction in biodiversity has led to an increase in diseases and other health problems. For instance, when the population of a particular species declines, the parasites that depend on it will have to find new hosts. This can lead to the spread of diseases to other species and ultimately to humans. Through his explanations, Attenborough is able to simplify complex ideas about biodiversity and the environment for his readers. In summary, his ability to create comparisons and associations with other ideas that we are familiar with and simplify complex notions with clear thinking and simple words makes him a great natural historian.
To know more about environment visit:
https://brainly.com/question/29885760
#SPJ11
Draw out a punnett square for a bull that is carrier and a cow that is a carrier for the dwarfism gene? What percentage of the offspring will have dwarfism? QUESTION 6 Which of the following would best desribe the selection criteeria of a zoo captive breeding program of an endangered animal species? To try to increase genetic diversity of the species by breeding individuals who are not closely related. to attempt cross breeding and to breed different species together to create a superior individuali, to encourage inbreeding to develop more desirable traits in the population
A Punnett square is a graphical method used to predict the possible genotypes and phenotypes of offspring of two parents based on their genetic makeup. For a bull that is a carrier and a cow that is a carrier for the dwarfism gene, the Punnett square is shown below.
Both parents have the genotype Bb (carrier), where B represents the dominant normal allele and b represents the recessive dwarfism allele. The Punnett square shows the possible offspring resulting from their cross.Offspring | BB | Bb | bbBB | Bb | Bb | BbBb | Bb | bb | bbThe phenotypic ratio of the offspring is 3:1 (Normal : Dwarf), which means that 75% of the offspring will not have dwarfism while 25% of the offspring will have dwarfism.
Selection criteria for a zoo captive breeding program of an endangered animal species would best be described as to try to increase genetic diversity of the species by breeding individuals who are not closely related. This is because genetic diversity is the key to a population's ability to adapt to changing environmental conditions and survive threats like diseases, predation, and climate change. If closely related individuals are bred, the population may experience inbreeding depression, which can lead to a reduction in fitness, increased mortality, and reduced reproductive success.
To know more about genetic visit :
https://brainly.com/question/30459739
#SPJ11
Do you agree with using genetically engineered products in the food supply? Explain your response.
Yes, I agree with using genetically modified products in the food supply. They, alone, do not pose a risk to human health at all. Genetically engineered products can be modified to be more resistance to disease, which, without GMOs, could decimate a plant supply vital to many people.
Please help! question which option best describes a concern people have about limiting the harvesting of trees?
A. when forests grow too dense, they crowd out other organisms.
B. the lumber industry provides jobs and helps local economies.
C. if we don't cut down some trees, the soil will become depleted of nutrients.
D. not harvesting trees may negatively impact the aesthetic value of land.
what is it called when vesicles are used to move substances out of the cell?
Answer:
The process of using vesicles to move substances out of the cell is called exocytosis. During exocytosis, vesicles are engulfed by the plasma membrane and then fuse with it, releasing their contents outside the cell. This process is important for the removal of waste products from the cell. It can also be used to release hormones and neurotransmitters
Explanation:
suppose a carbon dioxide molecule leaves a respiring muscle cell in the leg and is transported in blood to the lungs. it moves through
1) heart
2) systemitic vein
3) alveolar capillaries
4) pulmonary artetry
5) capillaries near muscle cells
in what order does this carbon dioxide molecule encounter these structures?
Answer:
Explanation:
the carbon dioxide molecule encounters the structures in the following order: 5) capillaries near muscle cells, 2) systemic vein, 1) heart, 4) pulmonary artery, and 3) alveolar capillaries.
Question 6 of 10
During transcription, RNA polymerase encounters the sequence of DNA
bases shown below.
AGC GCT
Which sequence of bases would result in the strand of mRNA? -
A. UCG CGU
OB. AGC GCT
OC. UCG CGA
OD. TCG CGA
4
Answer: a
Explanation:
a because u are coding mrna
the concept of using natural resources at a rate that does not deplete them is called?
The conversion of a once soil-rich area to an area of little vegetation is called: deforestation. The loss of fertile soils from an area through the action of water or wind is called: desertification. The concept of using natural resources at a rate that does not deplete them is called: sustainable development.
S
A student conducts an enzyme experiment revolving around changing the concentration of
sodium chloride, and its effects upon the rate of reaction when applied to the enzyme amylase
and starch in the presence of a pH Buffer of 7. The student obtains a data set based upon the
time taken for the disappearance of starch, associated with a sustained colouration of brown
when the mixture was added to a spotting tile containing I/KI (iodine in potassium iodide).
The student obtains the following results: it took 4 minutes and 32 seconds for the standard
solution of amylase containing 0.5% NaCl to breakdown the starch once the amylase was
added, 6 minutes and 24 seconds for the standard solution of amylase with 0.4% NaCl, whilst
the 0.3% NaCl and amylase mix took eight minutes and forty seconds to break the starch
down. 0.1% NaCl gave a result of eighteen minutes and 30 seconds, whilst the amylase
solution with 0.2% NaCl took 12 minutes and twenty seconds.
The student is informed that as the results reflect the use of the disappearance of substrate
and not the production of product, their results must be converted to 1/T (where T=time in
conds) for the rate of reaction.
a) Help the student by processing the data and producing a suitable table of results.
(6 marks)
b) From the results produce a suitable graph - in excel (or other suitable package) and
insert the graph here. (You may draw by hand the graph on suitable graph paper and
scan and insert as an alternative to the use of excel).
(6 marks)
c) Give a detailed biological explanation to account for the results obtained.
(8 marks)
(Total 20 Marks)
Answer:
To process the data and produce a suitable table of results, we need to convert the time values to 1/T, where T is the time in seconds. Here is a table representing the processed data:
b) To create a suitable graph, let's plot the NaCl concentration on the x-axis and the 1/Time on the y-axis. Here is a graph showing the relationship between NaCl concentration and the rate of reaction:

c) Detailed biological explanation to account for the results obtained: The results obtained suggest that the rate of reaction, as indicated by the disappearance of starch, is affected by the concentration of sodium chloride (NaCl). Amylase is an enzyme responsible for breaking down starch into smaller molecules. Sodium chloride, as a salt, can influence the activity of enzymes.
In this experiment, as the concentration of NaCl decreases, the time taken for starch breakdown increases. This implies that higher NaCl concentrations enhance the activity of amylase, leading to faster starch breakdown.
One possible explanation for this observation is that NaCl can stabilize the structure of amylase, thereby promoting its active conformation. At higher NaCl concentrations, the enzyme's active site may have a more optimal conformation, allowing for efficient binding of the starch substrate and faster enzymatic activity. As the NaCl concentration decreases, the enzyme's structure may become less stable, resulting in slower starch breakdown.
Another factor to consider is the effect of salt concentration on the overall osmotic environment. Changes in NaCl concentration can impact the water potential and osmotic balance, which in turn can influence the enzyme's activity. The precise mechanism behind this phenomenon would require further investigation and analysis.
Overall, the results indicate that sodium chloride concentration plays a role in modulating the rate of reaction catalyzed by amylase. Further experimentation and analysis could provide additional insights into the specific mechanisms involved in this process.
NaCl Concentration (%)Time (min:sec)Time (s)1/Time0.54:322720.00370.46:243840.00260.38:405200.00190.118:3011100.00090.212:207400.0014
To process the data and produce a suitable table of results, convert the time taken to break down the starch into 1/T values. Use the 1/T values to plot a graph of enzyme activity versus sodium chloride concentration. The rate of reaction is fastest at a sodium chloride concentration of 0.5% and decreases as the concentration decreases.
Explanation:
To process the data and produce a suitable table of results, convert the time taken to break down the starch into 1/T (where T=time in seconds). The table should include the different concentrations of sodium chloride and their corresponding 1/T values.
To create a graph, plot the concentration of sodium chloride on the x-axis and the 1/T values on the y-axis. Use Excel or another graphing package to plot the points and draw a smooth curve through them.
The results can be explained biologically by considering the effect of sodium chloride concentration on enzyme activity. The rate of reaction is fastest when the concentration of sodium chloride is 0.5% and decreases as the concentration decreases. This is because the presence of sodium chloride affects the shape and activity of the enzyme, making it less effective at lower concentrations.
Learn more about Enzyme experiment here:https://brainly.com/question/32396159
#SPJ2
Which of the following is the correct mRNA sequence for the DNA sequence shown below?
TACTGATGACTGACT
start- thr-asp- stop
AUG-ACU-GAC-UGA
start - asp-thr - stop
ATG-ACT-GAC-TGA
Answer: the third answer
Explanation:
reason being is because have to code for Trna and then the amino acids
A tetrahedral die is an equilateral triangular pyramid. The base edge of the tetrahedral die is 26 millimeters and the height is 20 millimeters.
What is the surface area of the tetrahedral die to the nearest ten square millimeters?
A tetrahedral die is an equilateral triangular pyramid with the base edge of the tetrahedral die is 26 millimeters and the height is 20 millimeters has the surface area of the tetrahedral die is approximately 1350 square millimeters to the nearest ten square millimeters.
A tetrahedral die is an equilateral triangular pyramid. The base edge of the tetrahedral die is 26 millimeters and the height is 20 millimeters. What is the surface area of the tetrahedral die to the nearest ten square millimeters?Surface area of tetrahedral dieTo find the surface area of the tetrahedral die, we need to first calculate the area of the triangular faces and then add them up.
The surface area of a tetrahedral die can be calculated as follows:Surface area of a tetrahedral die = Sum of the areas of all its triangular faces.Area of an equilateral triangle. A tetrahedral die is an equilateral triangular pyramid. An equilateral triangle is a triangle where all its sides and angles are equal. The area of an equilateral triangle is given by the formula:Area of an equilateral triangle = (√3/4) * a² where a is the length of each side of the equilateral triangle. Substituting a = 26mm,Area of the equilateral triangle = (√3/4) * 26²= 338 mm².
The tetrahedral die has four equilateral triangular faces. So, its surface area can be calculated by adding the area of each triangular face. Therefore,Surface area of the tetrahedral die = 4 × area of the equilateral triangle= 4 × 338= 1352 mm²= 1.4 × 10³ mm²Therefore, the surface area of the tetrahedral die is approximately 1350 square millimeters to the nearest ten square millimeters.
For more such questions on triangular pyramid , visit:
https://brainly.com/question/30615121
#SPJ8
Do most mammals have adaptations for internal fertilization and internal development of the fetus or internal fertilization and external development of the fetus?
Answer:
internally
Explanation:
In mammals, fertilization takes place internally in the protected environment of the ampulla of the oviduct, as opposed to external fertilization where sperm and egg meet outside the parent's body (e.g., as in fish, reptiles, amphibians and invertebrates).