At the point where [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\)[/tex], the point in their vicinity where the total electric field will be zero.
The point in the vicinity of two charges, q = 2C and q2 = -5C, where the total electric field will be zero can be determined by solving for the position where the electric fields due to each charge cancel each other out.
To find this point, we can use the principle of superposition. The electric field at any point due to multiple charges is the vector sum of the electric fields produced by each individual charge. Mathematically, the electric field at a point P due to a charge q can be calculated using Coulomb's law:
[tex]\[ \mathbf{E} = \frac{1}{4\pi\epsilon_0}\frac{q}{r^2}\mathbf{\hat{r}} \][/tex]
where[tex]\(\mathbf{E}\)[/tex] is the electric field, [tex]\(\epsilon_0\)[/tex] is the permittivity of free space, q is the charge, r is the distance between the charge and the point, and [tex]\(\mathbf{\hat{r}}\)[/tex] is the unit vector pointing from the charge to the point.
In this case, we have two charges, q = 2C and q2 = -5C, separated by a distance of 0.8 meters. We need to find the point where the electric fields due to these charges cancel each other out. This occurs when the magnitudes of the electric fields are equal but have opposite directions.
Using the equation for electric field, we can set up the following equation:
[tex]\[ \frac{1}{4\pi\epsilon_0}\frac{q}{r_1^2} = \frac{1}{4\pi\epsilon_0}\frac{q2}{r_2^2} \][/tex]
Simplifying this equation and substituting the given values, we can solve for the distances [tex]\(r_1\) and \(r_2\)[/tex] from each charge to the point where the total electric field is zero.
[tex]\[ \frac{1}{r_1^2} = \frac{q2}{q}\frac{1}{r_2^2} \]\\r_2 = \sqrt{\frac{q2}{q}} \cdot r_1 \]\[/tex] ,Substituting the given charges, we find [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\).[/tex]
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A circular loop of wire has a radius of 0.025 m and a resistance of 3.0Ω. It is placed in a 1.6 T magnetic field which is directed in through the loop as shown. a) Calculate the change in magnetic flux in the circular loop when the magnetic field turned off. [3 marks] b) If the circular loop has 140 turns, what is the emf induced in the loop at t=0.18 s? [2 marks] c) What is the current induced in the loop? [2 marks] d) State the direction of the current induced in the loop
a) The change in magnetic flux when the magnetic field is turned off is 0.08 Wb. b) The induced emf in the loop at t=0.18 s is 0.672 V. c) The induced current in the loop is 0.224 A. d) The current induced in the loop flows counterclockwise.
a) Change in magnetic flux is given by:ΔΦ = Φ₂ - Φ₁Φ₂ is the final magnetic flux, Φ₁ is the initial magnetic flux. Given that the magnetic field is turned off, the final magnetic flux Φ₂ becomes zero. We can calculate the initial magnetic flux Φ₁ using the formula:Φ₁ = BA. Where B is the magnetic field strength, and A is the area of the circular loop. Substituting the given values, we get:Φ₁ = πr²B = π(0.025)² (1.6)Φ₁ = 1.25 x 10⁻³ Wb. Therefore, the change in magnetic flux is:ΔΦ = Φ₂ - Φ₁ΔΦ = 0 - 1.25 x 10⁻³ΔΦ = -1.25 x 10⁻³ Wb)
The emf induced in the circular loop is given by the formula:ε = -N (ΔΦ/Δt). Substituting the given values, we get:ε = -140 (-1.25 x 10⁻³/0.18)ε = 10.97 Vc) The current induced in the circular loop is given by the formula: I = ε/R. Substituting the given values, we get: I = 10.97/3.0I = 3.66 Ad) The direction of the current induced in the circular loop can be determined by Lenz's law, which states that the induced current will flow in a direction such that it opposes the change in magnetic flux that produced it. In this case, when the magnetic field is turned off, the induced current will create a magnetic field in the opposite direction to the original field, to try to maintain the flux. Therefore, the current will flow in a direction such that its magnetic field points into the loop.
To know more about magnetic flux click here:
https://brainly.com/question/1596988
#SPJ11
You have a string with a mass of 0.0121 kg. You stretch the string with a force of 9.97 N, giving it a length of 1.91 m. Then, you vibrate the string transversely at precisely the frequency that corresponds to its fourth normal mode; that is, at its fourth harmonic. What is the wavelength λ4 of the standing wave you create in the string? What is the frequency f4?
The wavelength (λ₄) of the standing wave created in the string at its fourth harmonic is approximately 7.64 m, and the frequency (f₄) is approximately 3.30 Hz.
To find the wavelength (λ₄) and frequency (f₄) of the standing wave in the string at its fourth harmonic, we can follow these steps:
1. Calculate the velocity of the wave on the string.
The velocity (v) of the wave can be determined using the formula:
v = √(Tension / Linear mass density),
where Tension is the applied force and Linear mass density is the mass per unit length of the string.
Force (Tension) = 9.97 N
Mass of the string = 0.0121 kg
Length of the string = 1.91 m
The linear mass density (μ) can be defined as the ratio of mass to length.
μ = 0.0121 kg / 1.91 m = 0.00633 kg/m
Substituting the values into the formula:
v = √(9.97 N / 0.00633 kg/m)
v ≈ 25.24 m/s
2. Determine the wavelength (λ₄) of the standing wave.
At the fourth harmonic, the wavelength is equal to four times the length of the string:
λ₄ = 4 * Length of the string
λ₄ = 4 * 1.91 m
λ₄ ≈ 7.64 m
3. Calculate the frequency (f₄) of the standing wave.
f = v / λ,
where v is the velocity and λ is the wavelength.
Substituting the values:
f₄ = 25.24 m/s / 7.64 m
f₄ ≈ 3.30 Hz
Therefore, the wavelength (λ₄) of the standing wave created in the string at its fourth harmonic is approximately 7.64 m, and the frequency (f₄) is approximately 3.30 Hz.
Learn more about wavelength at: https://brainly.com/question/10750459
#SPJ11
1. Magnetic field lines
a. can cross each other when the field is strong.
b. indicate which way a compass needle would point if placed near the magnet.
c. are visible lines seen around magnets.
d. can easily be drawn within the subatomic structure of a magnetic atom.
Magnetic field lines indicate which way a compass needle would point if placed near the magnet. Hence, correct option is B.
Magnetic field are imaginary lines that form a continuous loop around a magnet, indicating the direction a compass needle would align itself if placed near the magnet. The field lines emerge from the magnet's north pole and curve around to enter the south pole.
They do not physically cross each other but follow a path based on the magnetic field's direction and strength. They represent the field's behavior and are not directly related to the subatomic structure of magnetic atoms.
To know more about magnetic field lines, visit,
https://brainly.com/question/7645789
#SPJ4
A gun fires a 21-gram bullet on a 1.8 kg wooden block hanging vertically at the end of string (The other end of the string is attached to a ceiling). The bullet embeds in the block, which swings upward a height of H. The speed of the bullet when leaving the gun is 250 m/s.
Answer: The wooden block swings upward a height of approximately 0.11 m.
Mass of bullet, m = 21 g = 0.021 kg
Mass of wooden block, M = 1.8 kg
Initial velocity of bullet, u = 250 m/s.
The velocity of the wooden block and bullet is zero initially, and the bullet is embedded in the wooden block after firing.The final velocity of the wooden block and bullet can be determined using the conservation of momentum. The momentum of the system is conserved when no external force acts on it.
Therefore, the initial momentum of the system = Final momentum of the system.
Initial momentum of the system is given as:m × u = (m + M) × v.
The velocity of the block and bullet after collision is v.m = 0.021 kg, M = 1.8 kg, u = 250 m/s.
After substituting the given values in the above equation, we get the final velocity of the system.
v = m × u / (m + M)
v = 0.021 × 250 / (0.021 + 1.8)
≈ 5.6 m/s. The final velocity of the wooden block and bullet after collision is approximately 5.6 m/s.
The potential energy gained by the block when it swings upward is converted from the kinetic energy of the bullet and the wooden block after the collision. Assuming that there is no loss of energy, the kinetic energy of the system after the collision is equal to the potential energy gained by the block.
Kinetic energy of the system after collision = ½ (m + M) × v². Potential energy gained by the block when it swings upward = Mgh, where h is the height it swings upward. Substituting the values of M, v, and g in the above equation, we get:
Mgh = ½ (m + M) × v²g
h = ½ (m + M) × v² / MG.
The height it swings upward is given as:
h = ½ (m + M) × v² / (MG)
h = ½ (0.021 + 1.8) × 5.6² / (1.8 × 9.81)
≈ 0.11 m.
Therefore, the wooden block swings upward a height of approximately 0.11 m.
Learn more about Momentum: https://brainly.com/question/1042017
#SPJ11
A taxi cab drives 3.0 km [S], then 2.0 km [W], then 1.0 km [N], and finally 5.0 km [E]. The entire trip takes 0.70 h. What is the taxi's average velocity? A) 3.6 km/h [34° S of W] B) 5.2 km/h [34° S of E]
C) 4.7 km/h (56° E of N] D) 3.6 km/h [56° W of S] E) 5.2 km/h [34° E of S]
The taxi's average velocity is approximately 5.1 km/h. None of the given answer choices match exactly, but option B) 5.2 km/h [34° S of E] is the closest.
To find the average velocity of the taxi, we need to calculate the total displacement and divide it by the total time taken.
Given the following distances and directions:
3.0 km [S]
2.0 km [W]
1.0 km [N]
5.0 km [E]
To calculate the total displacement, we need to consider the directions. The net displacement in the north-south direction is 3.0 km south - 1.0 km north = 2.0 km south. In the east-west direction, the net displacement is 5.0 km east - 2.0 km west = 3.0 km east.
Using the Pythagorean theorem, we can find the magnitude of the net displacement:
|Δx| = √((2.0 km)² + (3.0 km)²) = √(4.0 km² + 9.0 km²) = √13.0 km² = 3.6 km.
The average velocity is calculated by dividing the total displacement by the total time:
Average velocity = (Total displacement) / (Total time)
= 3.6 km / 0.70 h
≈ 5.1 km/h.
Therefore, the taxi's average velocity is approximately 5.1 km/h.
None of the provided answer choices match the calculated average velocity exactly, but option B) 5.2 km/h [34° S of E] is the closest approximation.
know more about pythagorean theorem here: brainly.com/question/14930619
#SPJ11
Voyager 1 is travelling 61,000 km/h and is 21.7 billion km away making it the most distant human-made object from Earth. Once it is far from any large planets or stars, when must it fire its rocket engines?
a. when it wants to speed up, slow down or turn
b. only when it wants to speed up
c. only when it wants to slow down
d. only when it wants to turn
The answer is A: when it wants to speed up, slow down or turn.
Voyager 1 is currently the farthest human-made object from Earth, travelling at 61,000 km/h, 21.7 billion km away. Once it is far from any large planets or stars,
when must it fire its rocket engines?
The answer is A: when it wants to speed up, slow down or turn. Voyagers 1 and 2 are equipped with thrusters that are used to control and stabilize their orientation (position and direction) in space. When it comes to course corrections, Voyagers use what is known as a “trajectory correction maneuver (TCM),” which is a series of rocket pulses fired in the desired direction at a set interval (typically every 3 to 6 months).
These adjustments ensure that the probe’s course remains on track and that it doesn’t collide with any objects or get pulled too close to the sun or any planets. Therefore, when Voyager 1 is far from any large planets or stars, it will fire its rocket engines whenever it wants to speed up, slow down or turn.
Learn more about trajectory correction maneuver here,
https://brainly.com/question/13244761
#SPJ11
At speeds approaching C, the relativistic momentum must be used to calculate the deBroglie wavelength. (a) Calculate the wavelength of a relativistic electron moving at 0.960c. (b) In order to probe the internal structure of the nucleus, electrons having a wavelength similar to the size of the nucleus can be used. In GeV, what is the kinetic energy of an electron with a wavelength of 1.0 fm, or 1.0 x 10⁻¹⁵ m?
The wavelength at relativistic speeds is 3.29 x 10^-12 m and the kinetic energy of an electron with a wavelength of 1.0 fm is 8.66 GeV.
(a) The formula for de Broglie wavelength is:
λ = h/p
where λ is wavelength, h is Planck's constant, and p is momentum. The formula for momentum is p = mv, where m is mass and v is velocity. At speeds approaching C, the relativistic momentum must be used, which is given by the formula p = γmv where γ is the Lorentz factor. Therefore, the formula for de Broglie wavelength at relativistic speeds is:
λ = h/γmv
v = 0.960c = 0.960 x 3 x 10^8 m/s
m = 9.11 x 10^-31 kg (mass of an electron)
h = 6.626 x 10^-34 J·s (Planck's constant)
γ = 1/√(1-v²/c²) = 1/√(1-0.960²) = 2.92 (Lorentz factor)
Substituting into the formula:
λ = (6.626 x 10^-34)/(2.92 x 9.11 x 10^-31 x 0.960 x 3 x 10^8)
λ = 3.29 x 10^-12 m
(b) The formula for de Broglie wavelength is:
λ = h/p
where λ is wavelength, h is Planck's constant, and p is momentum. The formula for momentum is p = mv, where m is mass and v is velocity. The kinetic energy can be found using the formula:
KE = (γ - 1)mc²
λ = 1.0 x 10^-15 m (size of the nucleus)
h = 6.626 x 10^-34 J·s (Planck's constant)
m = 9.11 x 10^-31 kg (mass of an electron)
c = 3 x 10^8 m/s (speed of light)
λ = h/p ⇒ p = h/λ
Substituting into the formula:
p = h/λ = (6.626 x 10^-34)/(1.0 x 10^-15)
p = 6.626 x 10^-19 kg·m/s
Kinetic energy:
KE = (γ - 1)mc²
Given the wavelength λ = 1.0 fm = 1.0 x 10^-15 m
We can calculate momentum p = h/λ = 6.626 x 10^-19 kg·m/s.
Substituting into the formula:
KE = (γ - 1)mc²
where m = 9.11 x 10^-31 kg and c = 3 x 10^8 m/s
KE = [(1/√(1-v²/c²)) - 1]mc²
Solving for v gives:
v = c√[1 - (mc²/KE + mc²)²]
Substituting the values:
mc² = 0.511 MeV (rest energy of an electron)
KE = hc/λ = (6.626 x 10^-34 x 3 x 10^8)/(1.0 x 10^-15) = 1.989 x 10^3 MeV
c = 3 x 10^8 m/s
The formula now becomes:
v = c√[1 - (mc²/KE + mc²)²] = 0.999999996c (approx)
γ = 1/√(1-v²/c²) = 5.24
Substituting into the formula:
KE = (γ - 1)mc² = 8.66 x 10^3 MeV = 8.66 GeV
Thus, the kinetic energy of an electron with a wavelength of 1.0 fm is 8.66 GeV.
Learn more about kinetic energy: https://brainly.com/question/30337295
#SPJ11
You lift a 100 N barbell a total distance of 0.5 meters off the ground. If you do 8 reps of this exercise quickly, what is the change in internal energy in your system?
The change in internal energy in your system when lifting a 100 N barbell a total distance of 0.5 meters during 8 reps quickly is approximately 400 Joules.
ΔU = W + Q
Where ΔU is the change in internal energy, W is the work done on the system, and Q is the heat transfer into or out of the system.
In this case, there is no heat transfer mentioned, so Q is assumed to be zero.
The work done on the system can be calculated by multiplying the force applied (the weight of the barbell) by the distance moved.
In this case, the force applied is 100 N and the distance moved is 0.5 meters.
Therefore, the work done on the system for one repetition is:
W = (100 N) * (0.5 m) = 50 J
Since you perform 8 repetitions, the total work done on the system is:
[tex]W_{total}[/tex] = 8 * 50 J = 400 J
Therefore, the change in internal energy in your system is 400 Joules (J).
To learn more about internal energy visit:
brainly.com/question/3453679
#SPJ11
A 380 V, 50 Hz, 960 rpm, star-connected induction machine has the following per phase parameters referred to the stator: Magnetizing reactance, R. = 75 12; core-loss resistance, Xm = 500 S2; stator winding resistance, R= 2 12; stator leakage reactance, X1 = 3.2; rotor winding resistance, R2 = 3.2; rotor leakage reactance, X2 22. Friction and windage losses are negligible. Based on the approximate equivalent circuit model, a) Calculate the rated output power and torque of the machine. (5 marks) b) Calculate the starting torque, stator starting current and power factor.
A) The rated output power and torque of the machine are approximately 50 kW and 151.92 Nm, respectively.
b) The starting torque is approximately 94.73 Nm, the stator starting current is approximately 57.14 A, and the power factor is approximately 0.8 lagging.
A) Calculation of rated output power and torque:
Rated Output Power (P) = (3 * V² * R) / (Z_total * 2)
P = (3 * (380 V)² * 5.2 Ω) / ((5.2 + j100.2) Ω * 2)
P ≈ 50 kW
Rated Torque (T) = (P * 1000) / (2 * π * n_r)
T = (50 kW * 1000) / (2 * π * (960 rpm * (2π rad/1 min)))
T ≈ 151.92 Nm
b) Calculation of starting torque, stator starting current, and power factor:
Starting Torque (T_start) = (3 * V² * R₂) / (s * Z_total)
T_start = (3 * (380 V)² * 3.2 Ω) / (1 * (5.2 + j100.2) Ω)
T_start ≈ 94.73 Nm
Stator Starting Current (I_start) = (V / Z_total) * (R / √(R² + X²))
I_start = (380 V / (5.2 + j100.2) Ω) * (5.2 Ω / √(5.2² + 100.2²) Ω)
I_start ≈ 57.14 A
Power Factor (cos(θ)) = R / √(R² + X²)
cos(θ) = 5.2 Ω / √(5.2² + 100.2²) Ω
cos(θ) ≈ 0.8
learn more about rated output power here:
https://brainly.com/question/17108717
#SPJ4
a) Calculate the wavelength of light emitted by a Hydrogen atom when its electron decays from the n=3 to the n=1 state energy level. b) With respect to the photoelectric effect, the work function of Lead ( Pb) is 4.25eV. What is the cut-off wavelength of Pb ? c) A sample of Pb is illuminated with light having the wavelength calculated in part a). Calculate the velocity of the emitted electrons.
a) When an electron in a hydrogen atom transitions from the n=3 to the n=1 energy level, the wavelength of light emitted can be calculated using the Rydberg formula: 1/λ = R_H * (1/n_1^2 - 1/n_2^2), where λ is the wavelength, R_H is the Rydberg constant for hydrogen (approximately 1.097 × 10^7 m^-1), n_1 is the initial energy level (n=3), and n_2 is the final energy level (n=1).
b) The cut-off wavelength of lead (Pb) can be determined based on the work function, which is the minimum energy required to remove an electron from the metal surface. The relationship between the cut-off wavelength (λ_cutoff) and the work function (Φ) is given by λ_cutoff = hc / Φ, where h is Planck's constant (approximately 6.626 × 10^-34 J·s) and c is the speed of light (approximately 3.00 × 10^8 m/s). By substituting the value of the work function (4.25 eV) into the equation, we can calculate the cut-off wavelength of lead.
c) Once the wavelength of the emitted light from part a) is known, the velocity of the emitted electrons can be determined using the de Broglie wavelength equation: λ = h / mv, where m is the mass of the electron and v is its velocity. By rearranging the equation, we can solve for the velocity: v = h / (mλ). By substituting the mass of an electron and the calculated wavelength into the equation, we can find the velocity of the emitted electrons.
Learn more about the Rydberg formula, here:
https://brainly.com/question/32818875
#SPJ11
An RC circuit has an unknown resistance and an initially uncharged capacitor of 666 x 10F When connected to a source potential, it takes the capacitor 27.6 s to become 85.6 % fully charged. What is the resistance of the circuit? Enter a number rounded to the nearest 100 place.
The resistance of the RC circuit is approximately 267 Ω, rounded to the nearest hundredth.
To find the resistance of the RC circuit, we can use the time constant formula for charging a capacitor in an RC circuit:
τ = RC
where τ is the time constant, R is the resistance, and C is the capacitance.
We are given that it takes the capacitor 27.6 s to become 85.6% fully charged. In terms of the time constant, this corresponds to approximately 1 time constant (τ):
t = 1τ
27.6 s = 1τ
Since the capacitor is 85.6% charged, the remaining charge is 14.4%:
Q = 0.144Qmax
Now we can rearrange the time constant formula to solve for the resistance:
R = τ / C
Substituting the given values:
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R ≈ 267 Ω
To knwo more about RC circuit
https://brainly.com/question/2741777
#SPJ11
How do I derive the formula for the magnetic field at a point
near infinite and semi-infinite long wire using biot savart's
law?
To derive the formula for the magnetic field at a point near an infinite and semi-infinite long wire using Biot-Savart's law.
Follow these steps: the variables, Express Biot-Savart's law, the direction of the magnetic field, an infinite long wire and a semi-infinite long wire.
Define the variables:
I: Current flowing through the wire
dl: Infinitesimally small length element along the wire
r: Distance between the point of interest and the current element dl
θ: Angle between the wire and the line connecting the current element to the point of interest
μ₀: Permeability of free space (constant)
Express Biot-Savart's law:
B = (μ₀ / 4π) * (I * dl × r) / r³
This formula represents the magnetic field generated by an infinitesimal current element dl at a distance r from the wire.
Determine the direction of the magnetic field:
The magnetic field is perpendicular to both dl and r, and follows the right-hand rule. It forms concentric circles around the wire.
Consider an infinite long wire:
In the case of an infinite long wire, the wire extends infinitely in both directions. The current is assumed to be uniform throughout the wire.
The contribution to the magnetic field from different segments of the wire cancels out, except for those elements located at the same distance from the point of interest.
By symmetry, the magnitude of the magnetic field at a point near an infinite long wire is given by:
B = (μ₀ * I) / (2π * r)
This formula represents the magnetic field at a point near an infinite long wire.
Consider a semi-infinite long wire:
In the case of a semi-infinite long wire, we have one end of the wire located at the point of interest, and the wire extends infinitely in one direction.
The contribution to the magnetic field from segments of the wire located beyond the point of interest does not affect the field at the point of interest.
By considering only the current elements along the finite portion of the wire, we can derive the formula for the magnetic field at a point near a semi-infinite long wire.
The magnitude of the magnetic field at a point near a semi-infinite long wire is given by:
B = (μ₀ * I) / (2π * r)
This formula is the same as that for an infinite long wire.
By following these steps, we can derive the formula for the magnetic field at a point near an infinite and semi-infinite long wire using Biot-Savart's law.
To know more about Biot-Savart's law
https://brainly.com/question/1120482
#SPJ11
7. What is the energy of a motorcycle moving down the hill?
A. entirely kinetic
B. entirely potential
C. entirely gravitational
D. both Kinetic and Potential
Calculate the change in air pressure you will experience if you climb a 1400 m mountain, assuming that the temperature and air density do not change over this distance and that they were 22.0 ∘C and 1.20 kg/m3 respectively, at the bottom of the mountain.
If you took a 0.500 L breath at the foot of the mountain and managed to hold it until you reached the top, what would be the volume of this breath when you exhaled it there?
When you exhale the breath at the top of the mountain, its volume would be approximately 0.000197 m³.
To calculate the change in air pressure, we can use the hydrostatic pressure formula:
ΔP = ρ * g * Δh
where:
ΔP is the change in pressure,
ρ is the density of air,
g is the acceleration due to gravity, and
Δh is the change in height.
Given:
ρ = 1.20 kg/m³ (density of air at the bottom of the mountain)
Δh = 1400 m (change in height)
We need to determine the change in pressure, ΔP.
Let's calculate it:
ΔP = 1.20 kg/m³ * 9.8 m/s² * 1400 m
ΔP ≈ 16,632 Pa
Therefore, the change in air pressure when climbing the 1400 m mountain is approximately 16,632 Pa.
Now, let's calculate the volume of the breath when exhaled at the top of the mountain. To do this, we need to consider the ideal gas law:
PV = nRT
where:
P is the pressure,
V is the volume,
n is the number of moles of gas,
R is the ideal gas constant, and
T is the temperature in Kelvin.
Given:
V = 0.500 L = 0.500 * 0.001 m³ (converting liters to cubic meters)
P = 16,632 Pa (pressure at the top of the mountain, as calculated earlier)
T = 22.0 °C = 22.0 + 273.15 K (converting Celsius to Kelvin)
Now, let's rearrange the ideal gas law to solve for V:
V = (nRT) / P
To find the new volume, we need to assume that the number of moles of gas remains constant during the ascent.
[tex]V_{new}[/tex] = (V * [tex]P_{new}[/tex] * T) / (P * [tex]T_{new}[/tex])
where:
[tex]P_{new}[/tex] = P + ΔP (total pressure at the top of the mountain)
[tex]T_{new}[/tex] = T (assuming the temperature does not change)
Now, let's calculate the new volume:
[tex]V_{new}[/tex] = (0.500 * 0.001 m³ * (16,632 Pa + 0)) / (16,632 Pa * (22.0 + 273.15) K)
[tex]V_{new}[/tex] ≈ 0.000197 m³
Therefore, when you exhale the breath at the top of the mountain, its volume would be approximately 0.000197 m³.
To learn more about ideal gas law visit:
brainly.com/question/30458409
#SPJ11
Using the equation below, calculate the energy uncertainty within an interval of .001645 seconds.
Heisenberg Uncertainty for Energy and Time There is another form of Heisenberg's uncertainty principle for simultaneous measurements of energy and time. In equation form, ΔΕΔt ≥ h/4π’
The energy uncertainty within an interval of 0.001645 seconds is equal to or greater than 1.006 x 10^-32 Joules.
The equation you provided is the Heisenberg uncertainty principle for simultaneous measurements of energy (ΔE) and time (Δt):
ΔE Δt ≥ h / (4π)
To calculate the energy uncertainty within an interval of 0.001645 seconds, we can rearrange the equation:
ΔE ≥ h / (4π Δt)
Given that Δt = 0.001645 seconds and h is Planck's constant (approximately 6.626 x 10^-34 J·s), we can substitute these values into the equation:
ΔE ≥ (6.626 x 10^-34 J·s) / (4π × 0.001645 s)
Calculating the right side of the equation:
ΔE ≥ 1.006 x 10^-32 J
Therefore, the energy uncertainty within an interval of 0.001645 seconds is equal to or greater than 1.006 x 10^-32 Joules.
To learn more about Heisenberg uncertainty principle visit: https://brainly.com/question/11488878
#SPJ11
What is the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute?
The potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
A capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute will have a potential difference of 3000 V between the plates.What is a capacitor?Capacitors are electronic devices that can store an electric charge temporarily. The unit of capacitance is the farad (F). It can be calculated by dividing the charge stored in one plate by the potential difference between the two plates.C=Q/VPotential Difference between plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minuteIn this case, we have to determine the potential difference between the plates of the capacitor.
The energy stored in the capacitor can be computed by the formula:Energy stored in a capacitor E = 1/2CV²Where,C is the capacitanceV is the potential difference between the platesE is the energy stored in the capacitorWe can rearrange the formula to obtain the potential difference between the plates of the capacitor as:V = √(2E/C)Watts is a unit of power. To calculate the energy in watt-hours, we must convert 75.0 W to watt-hours by multiplying by time, which is 1 minute (60 seconds).
Watt-hours = Power x Time = 75.0 x 1/60 = 1.25 WhTo calculate the energy in joules, we need to convert watt-hours to joules.1 Wh = 3.6 x 10^3 J1.25 Wh = 1.25 x 3.6 x 10^3 J = 4.5 x 10^3 JSubstitute the values of capacitance and energy into the formula above to get the potential difference between the plates of the capacitor.V = √(2E/C) = √(2 × 4.5 × 10³ / 3) = 3000 voltsTherefore, the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
Learn more about Energy here,what is the definition of energy
https://brainly.com/question/2003548
#SPJ11
Charges Q 1
=−3C and Q 2
=−5C held fixed on a line. A third charge Q 3
=−4C is free to move along the line. Determine if the equilibrium position for Q 3
is a stable or unstable equilibrium. It cannot be determined if the equilibrium is stable or unstable. Stable Unstable There is no equilibrium position.
The equilibrium position for the third charge, Q₃, held fixed on a line between charges Q₁ and Q₂ with values -3C and -5C respectively, can be determined to be an unstable equilibrium.
To determine the stability of the equilibrium position for Q₃, we can examine the forces acting on it. The force experienced by Q₃ due to the electric fields created by Q₁ and Q₂ is given by Coulomb's law:
[tex]\[ F_{13} = k \frac{{Q_1 Q_3}}{{r_{13}^2}} \][/tex]
[tex]\[ F_{23} = k \frac{{Q_2 Q_3}}{{r_{23}^2}} \][/tex]
where F₁₃ and F₂₃ are the forces experienced by Q₃ due to Q₁ and Q₂, k is the electrostatic constant, Q₁, Q₂, and Q₃ are the charges, and r₁₃ and r₂₃ are the distances between Q₁ and Q₃, and Q₂ and Q₃, respectively.
In this case, both Q₁ and Q₂ are negative charges, indicating that the forces experienced by Q₃ are attractive towards Q₁ and Q₂. Since Q₃ is free to move along the line, any slight displacement from the equilibrium position would result in an imbalance of forces, causing Q₃ to experience a net force that drives it further away from the equilibrium position.
This indicates an unstable equilibrium, as the system is inherently unstable and any perturbation leads to an increasing displacement. Therefore, the equilibrium position for Q₃ in this configuration is determined to be an unstable equilibrium.
Learn more about equilibrium here:
https://brainly.com/question/31833470
#SPJ11
&=8.854x10-¹2 [F/m] Ao=4r×107 [H/m] 16) A Hertzian dipole antenna, placed in free space, has a radiation resistance of 492 when it is connected to a 100 MHz source. The length of this antenna equals: a) 1.52 cm b) 5.09 cm c) 14.3 cm d) 21.4 cm e) None of the above. 18) An air-filled 3cmx1cm rectangular metallic waveguide operates at 15.5 GHz. The number of propagating TM modes equals: a) 1 b) 2 c) 3 d) 4 e) None of the above.
Question 16: The length of the antenna equals 7.54 cm, the correct option is (e) None of the above.
Question 18: There will be no propagating modes, the correct option is (e) None of the above.
Question 16: A Hertzian dipole antenna, placed in free space, has a radiation resistance of 492 when it is connected to a 100 MHz source. The length of this antenna equals
Given,
A Hertzian dipole antenna is placed in free space
The radiation resistance of the antenna when it is connected to a 100 MHz source is 492
We know that the radiation resistance of a short dipole antenna is given by
[tex]R_{r}[/tex] = 80π²r²/λ²,
where, r = length of the antenna, λ = wavelength of the radiation.
Rearranging, r = λ/4 × √([tex]R_{r}[/tex]/π²)……..(1)
The formula for the wavelength is given by
λ = c/f
where, c = speed of light, f = frequency of the radiation.
Putting the values,
λ = 3 × 10⁸/100 × 10⁶ = 3 m
Putting the value of λ in equation (1),
r = 3/4 × √(492/π²) = 0.0754 m = 7.54 cm
Therefore, the length of the antenna equals 7.54 cm.
Hence, the correct option is (e) None of the above.
Note: The given radiation resistance is of a Hertzian dipole antenna but the question is asking the length of a short dipole antenna. So, we have used the formula for a short dipole antenna.
Question 18: An air-filled 3 cm x 1 cm rectangular metallic waveguide operates at 15.5 GHz. The number of propagating TM modes equals
Given,
Air-filled rectangular metallic waveguide has dimensions 3 cm x 1 cm
The operating frequency is 15.5 GHz.
We know that the maximum frequency of operation for TE₁₀ mode in a rectangular waveguide is given by
[tex]f_c[/tex] = c/2a……(1)
where, c = speed of light, a = width of the waveguide (minimum dimension).
The formula for the cut-off frequency of TM₁₀ mode is given by
[tex]f_c[/tex] = c/2b…….(2)
where, b = height of the waveguide (maximum dimension).
From equation (1), the width of the waveguide is given by
a = c/2[tex]f_c[/tex]
From equation (2), the height of the waveguide is given by
b = c/2[tex]f_c[/tex]
So, the cut-off frequency of TM₁₀ mode is given by
[tex]f_c[/tex] = c/2b = c/2a
We have given the values of a = 1 cm and b = 3 cm.
So, we can write
[tex]f_c[/tex] = c/2b = c/2a = 15.5 GHz
From the above equation, the cut-off frequency is 15.5 GHz which is the operating frequency of the waveguide.
So, there will be no propagating modes.
Therefore, the correct option is (e) None of the above.
Learn more about dipole antenna here:
https://brainly.com/question/17414859
#SPJ11
(a) A hydrogen atom has its electron in the n = 6 level. The radius of the electron's orbit in the Bohr model is 1.905 nm. Find the de Broglie wavelength of the electron under these circumstances.
m?
(b) What is the momentum, mv, of the electron in its orbit?
kg-m/s?
The de Broglie wavelength of the electron under these circumstances is 2.66 x 10^-10 m and the momentum of the electron in its orbit is 1.98 x 10^-24 kg·m/s.
(a) de Broglie's equation states that
λ=h/p
where,
λ is the wavelength
p is the momentum of the particle
h is Planck's constant = 6.626 x 10^-34 J·s
Firstly, we need to find the velocity of the electron in its orbit using the Bohr's model's formula:
v= (Z* e^2)/(4πε0rn)
where
Z=1 for hydrogen,
e is the charge on the electron,
ε0 is the permitivity of free space,
rn is the radius of the orbit
Substituting the given values into the equation,
v = [(1*1.6 x 10^-19 C)^2/(4π*8.85 x 10^-12 C^2 N^-1 m^-2)(6 * 10^-10 m)] = 2.18 x 10^6 m/s
Now, using de Broglie's equation:
λ = h/p
λ= h/mv
Substituting the values in the equation,
λ = 6.626 x 10^-34 J·s/(9.109 x 10^-31 kg) (2.18 x 10^6 m/s)λ= 2.66 x 10^-10 m
Therefore, the de Broglie wavelength of the electron under these circumstances is 2.66 x 10^-10 m.
(b) We have already found the velocity of the electron in its orbit in part (a):
v= 2.18 x 10^6 m/s
Using the formula,
p = mv
The mass of an electron is 9.109 x 10^-31 kg
Therefore,
p = 9.109 x 10^-31 kg (2.18 x 10^6 m/s)
p= 1.98 x 10^-24 kg·m/s
Thus, the momentum of the electron in its orbit is 1.98 x 10^-24 kg·m/s.
Learn more about de Broglie wavelength:
https://brainly.com/question/30404168
#SPJ11
Why friction is the most important property of nanomaterials?
kindly explain in details
Friction is an important property of nanomaterials as it significantly influences their behavior and performance at the nanoscale. Understanding friction at this scale is crucial for various applications and technologies involving nanomaterials.
When materials are reduced to nanoscale, their properties differ significantly from those at the bulk level. Due to the larger surface area, the atoms in nanomaterials have more surface energy, which results in increased reactivity and enhanced performance. Understanding the friction between materials is essential for developing efficient lubricants, coatings, and materials for various applications. It is also critical for the design of nanoelectromechanical systems, where devices operate at the nanoscale and friction plays a critical role in their performance. Friction is a force that resists motion between two surfaces in contact, and in nanomaterials, the adhesion forces and van der Waals forces between the surfaces are stronger.
Due to this, the frictional forces in nanomaterials are larger than those in bulk materials, making friction the most important property of nanomaterials. Friction affects the mechanical properties of nanomaterials and can lead to surface degradation, wear, and reduced lifetime. Therefore, understanding the frictional properties of nanomaterials is crucial for developing durable and high-performance materials. In conclusion, friction is the most important property of nanomaterials because it plays a crucial role in understanding the behavior and performance of materials at the nanoscale, which is essential for developing high-performance materials and devices.
To know more about nanomaterials click here:
https://brainly.com/question/31577301
#SPJ11
3 people of total mass 185 kg sit on a rectangular wood raft of size 7.6 m x 6.1 m x 0.38 m. What is the distance from the horizontal top surface of the raft to the water level? [Density of water is 1x10³1x10 3 kg/m³kg/m 3 and density of wood is 0.6x10³kg/m³0.6x10³ kg/m³ ]
Choice 1 of 5: 0.228 m
Choice 2 of 5: 0.148 m
Choice 3 of 5: 0.117 m
Choice 4 of 5: 0.232 m
Choice 5 of 5: 0.263 m
The distance from the horizontal top surface of the raft to the water level is 0.117 m, which is Choice 3 of 5.
To determine the distance from the horizontal top surface of the raft to the water level, we will use the following steps:
Step 1: Determine the mass of the raft.
Step 2: Determine the mass of the people.
Step 3: Determine the total mass of the raft and people.
Step 4: Determine the buoyant force acting on the raft.
Step 5: Determine the net force on the raft.
Step 6: Determine the distance from the top surface of the raft to the water level.
Step 1
The mass of the raft is given by;
Weight = Density × Volume × Gravity= 0.6 × 7.6 × 6.1 × 0.38 × 9.8= 1303.6 N
Step 2
The weight of the people is 185 × 9.8 = 1813 N.
Step 3
The total weight of the raft and people is;1303.6 + 1813 = 3116.6 N
Step 4
The buoyant force acting on the raft is;Density of water × Volume × Gravity= 1000 × 7.6 × 6.1 × 0.1 = 46556 N
Step 5
The net force on the raft is;
Buoyant force – Total weight of raft and people= 46556 – 3116.6 = 43439.4 N
Step 6
The distance from the top surface of the raft to the water level is given by the formula;
Distance = Net force on raft / (Density of water × Area of raft)
Distance = 43439.4 / (1000 × 7.6 × 6.1)= 0.117 m
Therefore, the distance from the horizontal top surface of the raft to the water level is 0.117 m, which is Choice 3 of 5.
Learn more about about distance:
https://brainly.com/question/26550516
#SPJ11
Red light of wavelength 633 nm from a helium-neon laser passes through a slit 0.340 mm wide. The diffraction pattern is observed on a screen 2.5 m away. Define the width of a bright fringe as the distance between the minima on either side. What is the width of the central bright fringe? 4.65 mm 1.86 mm 9.31 mm 14.2 mm
Therefore, the width of the central bright fringe is 0.11525 mm or approximately 1.16 × 10⁻¹ mm.Answer: 1.16 mm.
The formula to determine the angular width of the central maximum in the diffraction pattern is:$$\theta = 2.44 \frac{\lambda}{d}$$where:θ = angular widthλ = wavelengthd = slit width.Substituting the values,θ = 2.44 × (633 × 10⁻⁹) / (0.340 × 10⁻³) = 0.00004610The width of a bright fringe is the distance between the minima on either side. So, the width of the central bright fringe is twice the distance between the central maximum and the first minimum on either side. Therefore, the width of the central bright fringe is given by:$$w = 2 \theta L$$where:w = width of central bright fringeθ = angular widthL = distance between the slit and the screenSubstituting the values,w = 2 × 0.00004610 × 2.5 = 0.00011525 m = 0.11525 mm (approx). Therefore, the width of the central bright fringe is 0.11525 mm or approximately 1.16 × 10⁻¹ mm.Answer: 1.16 mm.
To know more about wavelength visit:
https://brainly.com/question/29812520
#SPJ11
A 2000 kg car accelerates from 28 m/s to a stop in 45 m. Determine the magnitude of the average acceleration during that time. 8.7 m/s 2
9.8 m/s 2
6.5 m/s 2
1.3 m/s 2
The correct option is 6.5 m/s².
Explanation:
Given,
Mass of car, m = 2000 kg
Initial velocity, u = 28 m/s
Final velocity, v = 0 m/s
Distance travelled, s = 45 m
To find,
Average acceleration = a
We know that,
Final velocity, v² = u² + 2as
On substituting the given values,0 = (28)² + 2a(45)
On solving the above equation,
We get,
a = - 6.5 m/s²
Hence, the magnitude of the average acceleration during that time is 6.5 m/s².
Learn more about magnitude of the average acceleration here
https://brainly.in/question/1828604
#SPJ11
Transcribed image text: What does the term standard candle mean? It is a standard heat source similar to a Bunsen burner. It refers to a class of objects that all have the same intrinsic brightness. It refers to a class of objects which all have closely the same intrinsic luminosity. Question 27 What is the usefulness of standard candles? To measure the brighnesses of distant celestial objects. To provide a standard heat source for spectroscopic lab samples. To measure the distances to celestial objects. Question 28 Which of the following are possible evolutionary outcomes for stars of greater than about ten solar masses, given in correct chronological Red giant star, supernova plus simultaneous neutron star Planetary nebula, red giant star, white dwarf Supergiant star, supernova plus simultaneous neutron star Supergiant star, supernova plus simultaneous black hole More than one of the above
The term “standard candle” refers to a class of objects that all have closely the same intrinsic luminosity. The intrinsic luminosity of these objects is constant and is independent of the distance between the object and an observer.
This characteristic of standard candles makes them useful in measuring the distances to celestial objects.
Standard candles are objects that all have a constant intrinsic brightness or luminosity. The intrinsic luminosity of a standard candle is constant and is independent of the distance between the object and an observer. This means that if an observer knows the intrinsic brightness of a standard candle and observes it, they can use the apparent brightness of the object to determine the distance between the object and the observer.
This method is useful for measuring the distances to celestial objects because it is often difficult to measure the distances directly.Standard candles are useful for measuring the distances to celestial objects. Astronomers can observe the apparent brightness of a standard candle and compare it to its intrinsic brightness to determine the distance between the object and the observer.
This method is useful for measuring the distances to very distant celestial objects such as galaxies and clusters of galaxies that are beyond the range of direct measurement. There are several types of standard candles, including Cepheid variables, Type Ia supernovae, and RR Lyrae stars.
Each type of standard candle has its own characteristics and is useful for measuring distances to different types of objects. For example, Type Ia supernovae are useful for measuring the distances to very distant galaxies, while Cepheid variables are useful for measuring the distances to nearby galaxies.
Standard candles are an important tool in astronomy, and their use has led to many important discoveries and advances in our understanding of the universe.
The usefulness of standard candles is to measure the distances to celestial objects. Standard candles are objects that have a constant intrinsic brightness or luminosity. This means that if an observer knows the intrinsic brightness of a standard candle and observes it, they can use the apparent brightness of the object to determine the distance between the object and the observer.
To know more about astronomy :
brainly.com/question/5165144
#SPJ11
A 3.0-kg block is dragged over a rough, horizontal surface by a constant force of 16 N acting at an angle of 37 ° above the horizontal as shown. The speed of the block increases from 3.0 m/s to 6.2 m/s in a displacement of 8.0 m. What work was done by the friction force during this displacement?
a. −63 J
b. −44 J
c. −36 J
d. +72 J
e. −58 J
The correct answer is option (a) −63 J. To find the work done by the friction force, we need to determine the net force acting on the block and multiply it by the displacement.
First, let's find the net force. We'll start by resolving the applied force into horizontal and vertical components. The horizontal component of the force can be calculated as:
F_horizontal = F_applied * cos(angle)
F_horizontal = 16 N * cos(37°)
F_horizontal ≈ 12.82 N
Since the block is moving at a constant speed, we know that the net force acting on it is zero.
Therefore, the friction force must oppose the applied force. The friction force can be determined using the equation:
friction force = mass * acceleration
Since the block is moving at a constant speed, its acceleration is zero. Thus, the friction force is:
friction force = 0
Therefore, the net force acting on the block is:
net force = F_applied - friction force
net force = F_horizontal - 0
net force = 12.82 N
Now, we can calculate the work done by the net force by multiplying it by the displacement:
work = net force * displacement
work = 12.82 N * 8.0 m
work ≈ 102.56 J
Since the question asks for the work done by the friction force, which is in the opposite direction of the net force, the work done by the friction force will be negative.
Therefore, the correct answer is:
a. −63 J
To learn more about work done visit:
brainly.com/question/31328416
#SPJ11
Charge q1= 25 nC is x= 3.0 cm at and charge q2= 15nC is at y= 5.0cm. what is the electric potential at the point (3.0cm, 5.0cm)
The electric potential at the point (3.0 cm, 5.0 cm) due to the given charges is approximately 179,900 volts.
To find the electric potential at the point (3.0 cm, 5.0 cm), we need to calculate the contributions from both charges. Using the formula V = k * (q1/r1 + q2/r2), where k is approximately 8.99 × 10⁹ N m²/C², q1 = 25 × 10⁻⁹ C, q2 = 15 × 10⁻⁹ C, r1 = 3.0 cm, and r2 = 5.0 cm, we can compute the electric potential.
First, we convert the distances from centimeters to meters by dividing by 100. Plugging in the values, we have V = (8.99 × 10⁹ N m²/C²) * (25 × 10⁻⁹ C / (0.03 m) + 15 × 10⁻⁹ C / (0.05 m)). Simplifying the expression, we find V ≈ 1.799 × 10⁵ volts.
Therefore, the electric potential at the point (3.0 cm, 5.0 cm) due to the given charges is approximately 179,900 volts. This value represents the potential energy per unit charge at that point and is the sum of the electric potential contributions from both charges.
Learn more about potential energy visit:
brainly.com/question/24284560
#SPJ11
A two-pole, 60-Hz synchronous generator has a rating of 250 MVA, 0.8 power factor lagging. The kinetic energy of the machine at synchronous speed is 1080 MJ. The machine is running steadily at synchronous speed and delivering 60 MW to a load at a power angle of 8 dectrical degrees. The load is suddenly removed. Determine the acceleration of the rotor. If the acceleration computed for the generator is constant for a period of 12 cycles, determine the value of the power angle and the rpm at the end of this time.
The acceleration of the rotor is 0.83333 rad/[tex]s^{2}[/tex]. At the end of 12 cycles, the power angle is 119.24 degrees, and the RPM is 3600.
The kinetic energy of the two-pole, 60-Hz synchronous generator with a 250 MVA and 0.8 power factor lagging rating at synchronous speed is given as 1080 MJ.
The generator is delivering 60 MW to a load at a power angle of 8 electrical degrees. After the load is removed, the acceleration of the rotor is given by the following formula:
Acceleration = (1.5 × [tex]P_{load}[/tex])/KE
where [tex]P_{load}[/tex] is the active power of the load and KE is the kinetic energy of the rotor.
The value of [tex]P_{load}[/tex] is 60 MW, and the KE is 1080 MJ.
Hence,
Acceleration = (1.5 × 60 × 106)/(1080 × 106)
Acceleration = 0.83333 rad/[tex]s^{2}[/tex]
To determine the power angle and the RPM at the end of 12 cycles, we can use the following formulas:
Δωt = acceleration × t
Δω = Δωt/(2π)Δω = Δω/2 × π × f
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−Δωt/[tex]wt^{2}[/tex]2) − (ΔE/2 × E)
Where Δωt is the change in angular speed, Δω is the change in angular speed in radians, f is the frequency, PA is the power angle, ωt is the final angular velocity, ΔE is the change in energy, and E is the initial energy.
Substituting the given values, we have:
Δωt = 0.83333 × 2π × 60 × 12
Δωt = 2994.89 rad
Δω = Δωt/(2π)Δω = 476.84 rad/s
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−Δωt/[tex]wt^{2}[/tex]2) − (ΔE/2 × E)
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−2994.89/2.618 × 1011) − (0/2 × 1080 × 106)]
PA = 119.24 degrees
At the end of 12 cycles, the RPM is given by:
ωt = (120 × f)/Poles
ωt = (120 × 60)/2
ωt = 3600 RPM
Therefore, the acceleration of the rotor is 0.83333 rad/[tex]s^{2}[/tex]. At the end of 12 cycles, the power angle is 119.24 degrees, and the RPM is 3600.
learn more about power angle here:
https://brainly.com/question/32780857
#SPJ11
Shivani walks at a constant speed of 2 m/s, then immediately turns and starts walking 40° west of north for 15 seconds. She takes a break for 10 seconds as she figures which way she wants to walk. Finally, she walks 50° east of south for 30 seconds. (a) Draw a diagram on an xy-plane. (b) How far away is Shivani from where she started walking? (c) What is her distance travelled?
Shivani is 60.07 m away from where she started walking.
Shivani's distance travelled is 60 m.
Shivani walks at a constant speed of 2 m/s, then immediately turns and starts walking 40° west of north for 15 seconds. She takes a break for 10 seconds as she figures which way she wants to walk. Finally, she walks 50° east of south for 30 seconds. We need to draw a diagram on an xy-plane, find how far away Shivani is from where she started walking and her distance travelled.
a) To plot Shivani's movements in an xy-plane, follow the given directions. Shivani first walks in a direction that is unspecified, which means that her direction is either north, south, east, or west. This direction is referred to as the positive y-direction and is drawn in the upwards direction.Then Shivani walks 40° west of north for 15 seconds. The line that Shivani takes to follow this direction should be at an angle of 40° with the positive y-axis, meaning it should be slightly slanted to the left. Finally, Shivani walks 50° east of south for 30 seconds. This line should be at an angle of 50° with the negative y-axis, meaning it should be slanted down and to the right.
b) We need to find the distance between the starting point and ending point of Shivani to know how far she is away from her starting point. To do that, we will first find the components of displacement along the X-axis and Y-axis:
Component of displacement along the X-axis = (Distance × cosθ) + (Distance × cosθ)
= Distance × (cosθ - cosθ)
= Distance × 2 sin (90° - θ)
Component of displacement along the Y-axis = (Distance × sinθ) - (Distance × sinθ)
= Distance × (sinθ - sinθ)
= Distance × 2 sin θ cos θ
In the above diagram, AB = 2sin(50°)cos(40°)×2m/s×30s = 37.07 m and CB = 2cos(50°)sin(40°)×2m/s×30s = 47.03 m
So, distance from the starting point = √(AB²+CB²) = √(37.07² + 47.03²) = 60.07 m
Thus, Shivani is 60.07 m away from where she started walking.
c) Distance travelled by Shivani = (2 m/s × 15 s) + (2 m/s × 30 s) = 60 m
Therefore, Shivani's distance travelled is 60 m.
Learn more about xy-plane and distance travelled: https://brainly.com/question/31022166
#SPJ11
The sun's intensity at the distance of the earth is 1370 W/m² 30% of this energy is reflected by water and clouds; 70% is absorbed. What would be the earth's average temperature (in °C) if the earth had no atmosphere? The emissivity of the surface is very close to 1. (The actual average temperature of the earth, about 15 °C, is higher than your calculation because of the greenhouse effect.)
The question requires the calculation of the Earth's average temperature in °C if the earth had no atmosphere given the following information.
Sun's intensity at the distance of the earth is 1370 W/m².
30% of this energy is reflected by water and clouds;
70% is absorbed.
The emissivity of the surface is very close to 1. The actual average temperature of the earth, about 15 °C, is higher than the calculation because of the greenhouse effect.
Calculation of Earth's temperature:
The formula to determine the temperature is given by P = e σ A T⁴. Here,
P is the power received by the Earth from the Sun.
A is the surface area of the Earth,
T is the temperature in kelvin,
e is the emissivity of the surface,
σ is the Stefan-Boltzmann constant, and the remaining terms have the usual meanings.
Substituting the values in the formula,
P = (1 - 0.30) × 1370 W/m² × 4π (6,371 km)²
= 9.04 × 10¹⁴ Wσ
= 5.67 × 10⁻⁸ W/m² K⁴A
= 4π (6,371 km)²
= 5.10 × 10¹⁴ m²e = 1
Hence, the formula now becomes
9.04 × 10¹⁴ = 1 × 5.67 × 10⁻⁸ × 5.10 × 10¹⁴ × T⁴
⇒ T⁴ = 2.0019 × 10⁴
⇒ T = 231.02
K= -42.13°C
Answer: The Earth's average temperature would be -42.13°C.
Learn more about green house effect here
https://brainly.com/question/17023405
#SPJ11
In lecture, we learned that dimensions of a quantity can be expressed as a product of the basic physical dimensions of length, mass and time, each raised to a rational power. Using dimensional analysis, we showed how the time it takes an object to fall scales with the height from which it is dropped. Now, let's apply this same principle to derive three quantities frequently used in particle physics and cosmology, the Planck length Lp, Planck mass Mp and Planck time Tp. The origin of these units comes from Max Planck, who introduced his now famous Planck's constant, h, in order to relate the energy of an oscillator to its frequency. = 1 Armed with the knowledge that h = 6.6 × 10-34 J. › s, where 1 joule (J) Newton meter = • 1 kg m²/s², Planck noticed a fascinating insight: if one takes h, the speed of light c = 3.0 × 10³m/s, and Newton's gravitational constant G = 6.7 × 10-¹¹m³kg-¹s-2, it is possible to combine them to form (a) Lp, (b) Mp, and (c) Tp, three new independent quantities that have units of length, mass and time, respectively. With h, c, G use dimensional analysis to find the values of Lp, Mp, Tp in SI units (for example: 1 Mp = (?)kg). For full points, you must show how you compute the dimensional exponents.
The Planck length Lp has a value of 1.6 × 10^-35 m, the Planck mass Mp has a value of 2.18 × 10^-8 kg, and the Planck time Tp has a value of 5.39 × 10^-44 s.
According to Planck's insight, the fundamental physical constants c, G and h can be combined to create three quantities that are not dependent on one another.
These quantities are known as Planck length Lp, Planck mass Mp, and Planck time Tp and are defined as follows:
Lp = √(Gh/c³) = 1.6 × 10^-35 mMp = √(h*c/G) = 2.18 × 10^-8 kgTp = √(Gh/c^5) = 5.39 × 10^-44 s
Where G is the gravitational constant with a value of 6.674 × 10^-11 Nm²/kg², h is Planck's constant with a value of 6.626 × 10^-34 J s, and c is the speed of light in a vacuum with a value of 299,792,458 m/s.
Now, using dimensional analysis, let us determine the dimensional exponents of Planck length, mass, and time.
Dimensional formula of G = M^-1L^3T^-2; h = M^1L^2T^-1; and c = LT^-1.
Multiplying G, h, and c together, we get:(G*h*c) = M^0L^5T^-5This implies that the units of Lp must be equal to L^1.
To find the exponent for mass, we simply divide (G*h/c³) by the speed of light
(c). Doing so gives us a result of: Mp = √(h*c/G) = √(6.626 × 10^-34 J s × 299,792,458 m/s / 6.674 × 10^-11 Nm²/kg²) = 2.18 × 10^-8 kg
This means that the exponent of mass must be equal to M^1.
We can now find the exponent of time by dividing (G*h/c^5) by the speed of light squared (c^2).
Doing so gives us a result of:Tp = √(G*h/c^5) = √(6.674 × 10^-11 Nm²/kg² × 6.626 × 10^-34 J s / (299,792,458 m/s)^5) = 5.39 × 10^-44 s
This implies that the exponent of time must be equal to T^1.
Therefore, the Planck length Lp has a value of 1.6 × 10^-35 m, the Planck mass Mp has a value of 2.18 × 10^-8 kg, and the Planck time Tp has a value of 5.39 × 10^-44 s.
Learn more about Planck length here:
https://brainly.com/question/857839
#SPJ11