You should not credit the source of an image unless you can specifically name the image creator.

a. true
b. false

Windows 98, Windows XP, Windows vista, Windows 7, Windows 8 y Windows 10.

Answer:

Evolution of Computer can be categorised into five generations. The First Generation of Computer (1945-1956 AD) used Vacuum Tubes, Second Generation of Computer (1956-1964 AD) used Transistors replacing Vacuum Tubes, Third Generation of Computer (1964-1971AD) used Integrated Circuit (IC) replacing Transistors in their electronic circuitry, Fourth Generation of Computer (1971-Present) used Very Large Scale Integration (VLSI) which is also known as microprocessor based technology and the Fifth Generation of Computer (Coming Generation) will incorporate Bio-Chip and Very Very Large Scale Integration (VVLSI) or Utra Large Scale Integration (ULSI) using Natural Language.

Explanation:

An example of the line of code needed to define the function is:

def total(x, y):

   total_sum = 0

   for num in range(x, y):

       total_sum += num

   return total_sum

Here we want to find a function tat takes two integers as inputs, and returns the total of the numbers within the range of these two numbers (num1, num2).

The line of code is something like:

def total(x, y):

   total_sum = 0

   for num in range(x, y):

       total_sum += num

   return total_sum

Learn more about Python at:

https://brainly.com/question/26497128

#SPJ4

Answer:

Consular Lookup and Support System

Locking is a mechanism in which concurrency is controlled to maintain consistency in database systems. It is accomplished by maintaining the consistency of data. Two-phase locking (2PL) is a concurrency control technique used in database management systems (DBMS). A deadlock is a scenario that occurs when two or more transactions are unable to proceed. A deadlock occurs when two or more processes are unable to proceed because each is waiting for the other to release a resource.  To avoid deadlocks we can use the method of avoidance, prevention, and detection.

The objective of locking is to ensure that two transactions do not concurrently update the same data. Two-phase locking ensures that the database is not accessed inconsistently while several transactions are executed concurrently.

It is because they are waiting for each other to release the locks.  Deadlocks can arise in a multi-threaded environment in which multiple transactions are attempting to access the same data. Each transaction is waiting for the other transaction to release its locks, which results in a never-ending cycle of waiting.

A transaction can obtain many locks on multiple resources, each of which is used to safeguard a single object. When two transactions acquire a lock on a resource and both request a lock on another resource held by the other transaction, a deadlock occurs. Each transaction must wait for the other to release the locks before continuing, which leads to a never-ending cycle of waiting.

There are three approaches to avoiding deadlocks:

1. Avoidance: This approach avoids deadlocks by implementing strategies that prevent the occurrence of deadlock.

2. Prevention: This approach avoids deadlocks by implementing strategies that prevent the occurrence of deadlock.

3. Detection: This approach detects deadlocks after they occur, then attempts to correct the issue.

You can learn more about database systems at: brainly.com/question/17959855

#SPJ11

Answer:

automated testing

Explanation:

to make sure that the item works

Answer:

CSS- Styling Language

JavaScript- Scripting Language

HTML- Markup Language

Explanation:

*Also verified answers with a Computer expert and the Internet*

===================================================================

Hope I Helped, Feel free to ask any questions to clarify :)

Have a great day!

More Love, More Peace, Less Hate.

       -Aadi x

Here is an example of a recursive function in Python that prints the numbers from 1 to n:

python-

def print_numbers(n):

   if n > 1:

       print_numbers(n - 1)

   print(n)

# Example usage:

print_numbers(5)

In this recursive function, we check if n is greater than 1. If it is, we call the function recursively with n-1 as the argument. This ensures that the function is called for the numbers from 1 to n-1 before printing the current number. Finally, we print the current number.

When we call print_numbers(5), the function will print the numbers 1 to 5 in separate lines, as shown in the example output provided in the question.

Learn more about recursive function here:

https://brainly.com/question/30027987

#SPJ11

The technology of 3D printing can influence the strength of the competitive forces faced by a drone manufacturer in several ways.

Firstly, 3D printing allows for rapid prototyping and iterative design, enabling manufacturers to bring products to market more quickly and stay ahead of competitors.

Secondly, it enables customization and personalization of drone components, giving manufacturers a unique selling proposition and potentially reducing the threat of substitutes.

Lastly, 3D printing can lower production costs and improve efficiency, leading to price competitiveness and potentially weakening the bargaining power of suppliers.

Overall, 3D printing enhances innovation, differentiation, and cost advantages, impacting competitive forces in the drone manufacturing industry.

Read more about 3D printing here:

https://brainly.com/question/24900619

#SPJ4

Answer:

Primary memory is volatile and not permanent.

Answer:

Primary memory refers to the memory that is accessed by the CPU and is not permanent.

It is volatile, since it is cleared out when the device is powered off.

Explanation:

Edge 2022

The first step a technician will typically take when upgrading a CPU for a client is to gather information and perform necessary preparations. This ensures a smooth and successful upgrade process.

By following these initial steps, the technician establishes a solid foundation for the CPU upgrade process and minimizes the risk of data loss or hardware damage.

For more questions on CPU, click on:

https://brainly.com/question/474553

#SPJ8

Answer:

1. The reason hunting seasons are displayed all over the world in cave paintings is because of the necessity to hunt. Ancient people everywhere were nomads that relied on wild animals for the majority of their calories. The paintings likely served as an expression of the importance of hunting to their culture. It could have also been used as educational material for very young children to learn about hunting as well as its importance to their community.

Explanation:

I can't do 2nd because the image was cut off, sorry.

A $1 price drop for Tropicana when it is not located in an in-store display is likely to have a minimal effect on sales and consumer behavior.

When a product is not placed in an in-store display, it is less likely to catch the attention of consumers and attract impulse purchases. In-store displays are designed to enhance product visibility and create a sense of urgency or excitement around a particular item. Without this strategic placement, a price drop alone may not have a significant impact on consumer behavior.

While price is an important factor in consumer decision-making, other variables such as convenience, brand loyalty, and product availability also come into play. If Tropicana is not prominently displayed, consumers may not even notice the price drop or be motivated to switch from their preferred brands. They might continue to purchase their regular choices or opt for alternative products that are more visible or familiar.

Therefore, without the added visibility and promotional benefits of an in-store display, a $1 price drop for Tropicana may have limited effects on sales and consumer behavior. To drive significant changes in purchasing patterns, it is important to consider various marketing strategies beyond just price reductions, such as advertising, product placement, and targeted promotions to increase brand awareness and appeal to consumers.

learn more about sales and consumer here:

https://brainly.com/question/32178564

#SPJ11

Answer:

5

Explanation:

x = 9

y -2

x = 2

expression = (x + y * z)

Apply BODMAS rule.

= 9 + (-2 * 2)

= 9 + (-4)

= 9 - 4

= 5

To change the owner of a case when it has been open for more than 7 days, an administrator on Cloud Kicks can complete the requirement by creating a Workflow Rule that automatically assigns the case to a different owner after 7 days have passed.

Here's how the administrator can create this Workflow Rule on Cloud Kicks:

1: Navigate to Workflow Rules

Go to Setup > Create > Workflow Rules. Click on the 'New Rule' button to create a new rule.

2: Choose Object

Select the object on which the rule is to be created. In this case, it's the 'Case' object. Click on the 'Next' button.

3: Set Rule Criteria

Set the rule criteria to "Case: Date/Time Opened greater than 7 days" to ensure that the rule only applies to cases that have been open for more than 7 days.

4: Add Workflow Action

Click on the 'Add Workflow Action' button and select 'New Field Update.'

5: Define Field Update

In the 'New Field Update' dialog box, define the field update as follows:Field to Update: OwnerID

New Owner: [Enter the name of the new owner here]

6: Save Field Update

Click on the 'Save' button to save the field update.

7: Activate Workflow Rule

Click on the 'Activate' button to activate the workflow rule. Once activated, the rule will automatically assign cases to a new owner after they have been open for more than 7 days.

Learn more about workflow rules at:

https://brainly.com/question/16968792

#SPJ11

The correct code arrangement is as follows: import array, arr = array.array('b', [5, 1, 2, 7, 6]), arr.append(12).

The code arrangement, assuming correct indentation, would be as follows:

First part:

import array

Second part:

arr = array.array('b', [5, 1, 2, 7, 6])

Third part:

arr.append(12)

In the first part, "import array" is a statement that imports the "array" module, which provides the array data type in Python.

The second part initializes a variable named "arr" and assigns it the result of the array constructor. The array constructor takes two arguments: the type code and the initial values. In this case, the type code is 'b', which represents signed char. The list [5, 1, 2, 7, 6] provides the initial values for the array.

In the third part, the "append()" method is called on the "arr" array. It adds the value 12 to the end of the array.

The correct code arrangement is important to ensure that the code executes in the desired sequence. In this case, it is crucial to import the "array" module before using it, then create the array with the specified type code and initial values, and finally append the value 12 to the array.

By following the correct code arrangement, the program will execute as intended, ensuring the desired behavior and expected output.

For more question on code visit:

https://brainly.com/question/30657432

#SPJ8

To create a file named "example.txt" in the project folder, you can follow these steps:

1. Open the File menu in your IDE (Integrated Development Environment).

2. Choose the option "New".

3. Choose the option "File".

4. A dialog box will appear. Enter the name of the file in the "File name" field. In this case, "example.txt".

5. Choose the location where you want to save the file. Make sure it is saved in the project folder, not in the same folder as your .java files.

6. Click on the "Finish" button. Your file is now created in the project folder.

Know more about IDE here:

https://brainly.com/question/29892470

#SPJ11

Answer:

hub is the correct answer

hope it is helpful to you

C. A reference declaration and object creation can be combined in a single statement is true.Reference variables, unlike ordinary variables, do not have their own memory address.

Instead, a reference variable is used to reference an object by using a memory address as an alias.The new operator is used to create a new instance of an object dynamically. A reference is then used to point to the new object. For example, the following line creates an instance of an object and assigns it to a reference variable at the same time: Date today = new Date();Three reference variables may refer to the same object, which is false.

To know more about variables visit :

https://brainly.com/question/29583350

#SPJ11

The following is a RISC-V function to reverse a string using recursion: void swap(char *x, char *y) { char temp = *x; *x = *y; *y = temp; }//

Recursive function to reverse a given string void reverse(char str[], int start, int end){ if (start >= end) return;swap(&str[start], &str[end]);reverse(str, start + 1, end - 1);}

Explanation: The above code is for a function to reverse a string using recursion in the RISC-V instruction set architecture (ISA).The swap() function swaps two characters at given positions.The reverse() function is a recursive function that reverses a given string by recursively swapping its characters from start to end using the swap() function.The base condition of the recursive function is that when the starting index is greater than or equal to the ending index, it will return the result as the reversed string.To call this function and reverse a given string, pass the string along with its starting index and ending index as parameters. This code will work well in the RISC-V ISA.

Know more about RISC here:

https://brainly.com/question/29817518

#SPJ11

An example of the algorithm that can find the maximum number of drop points covered by flying over the terrain once is given below.

The functioning of the given algorithm involves the analysis of two situations, one where the object flies parallel to the ground and the other where it flies in a vertical direction.

The system  identifies the highest feasible quantity of delivery locations in every instance and picks the greater figure as the outcome. By utilizing sets, it guarantees that there will be no repetition of coordinates, therefore preventing multiple counts.

Learn more about algorithm  from

https://brainly.com/question/24953880

#SPJ4

Both Technician A and Technician B are right.

Technician A is correct in stating that a groove is cut into the center of the pad's friction material to indicate pad wear. This groove serves as a wear indicator, allowing users to visually inspect the pad and determine if it needs replacement.

Technician B is also correct in mentioning that angled chamfers on the edges of the friction material allow dust to escape. These chamfers create pathways for dust, debris, and gases to be expelled from the brake system, improving the overall performance and preventing the buildup of contaminants that could affect braking efficiency.

Therefore, the correct answer is: Both A and B.

learn more about Technician here

https://brainly.com/question/14290207

#SPJ11

Answer: both

Explanation:

Answer:

I think they're all valid but the validility depends on the website your using the usernames on.

Explanation:

Here's some sample Java code that meets the requirements you specified:

import java.util.Scanner;

public class BinaryAddition {

   public static void main(String[] args) {

       Scanner input = new Scanner(System.in);

       // Get first binary number from user

       System.out.print("Enter first 4-bit binary number: ");

       String binary1 = input.next();

       // Get second binary number from user

       System.out.print("Enter second 4-bit binary number: ");

       String binary2 = input.next();

       // Convert binary numbers to decimal values

       int decimal1 = 0;

       int decimal2 = 0;

       for (int i = 0; i < 4; i++) {

           decimal1 += (binary1.charAt(i) - '0') * Math.pow(2, 3 - i);

           decimal2 += (binary2.charAt(i) - '0') * Math.pow(2, 3 - i);

       }

       // Add decimal values together

       int sum = decimal1 + decimal2;

       // Print results

       System.out.println("Decimal value of first binary number: " + decimal1);

       System.out.println("Decimal value of second binary number: " + decimal2);

       System.out.println("Sum of decimal values: " + sum);

       input.close();

   }

}

The program prompts the user to enter two 4-bit binary numbers, then converts them to decimal values using a for loop and the formula described in the hint section. It then adds the decimal values together and prints out all three values.

Learn more about Java code here:

https://brainly.com/question/31569985

#SPJ11

To enable Activation Keys using an encoded bit string, the list of features can be represented in a series of 5 hexadecimal numbers that begin with "0x".

Each hexadecimal number corresponds to a set of 4 bits, allowing for a total of 20 features to be represented.

Here's an example of how the encoded bit string could be represented:

Encoded bit string: 0xAB1C9

In this example, the encoded bit string consists of 5 hexadecimal numbers: 0xA, 0xB, 0x1, 0xC, and 0x9.

To interpret the encoded bit string and determine the enabled features, each hexadecimal number can be converted to its binary representation, resulting in a series of 20 bits. Each bit represents the status of a specific feature, where "1" indicates that the feature is enabled and "0" indicates that the feature is disabled.

For example:

0xA = 1010 (binary representation)

0xB = 1011

0x1 = 0001

0xC = 1100

0x9 = 1001

Combining these binary representations, we get: 1010 1011 0001 1100 1001

Each bit in this binary sequence corresponds to a specific feature, and its value determines whether the feature is enabled or disabled.

Please note that the specific mapping of features to bits in the encoded bit string may depend on the encoding scheme used and the specific requirements of the activation keys system you are working with.

learn more about encoded here

https://brainly.com/question/31381602

#SPJ11

(1) True, ggplot2 can rename variable titles and extract desired information from larger datasets. (2) False, geom_density() presents the density distribution of the data, not the overall distribution. (3) True, method="loess" indicates the use of local regression. (4) False, coord_flip() flips the x and y axes, altering the Cartesian space. (5) False, theme_bw() does not create a brewer palette.

True: ggplot2, a popular data visualization package in R, allows users to rename variable titles using the labs() function. Additionally, ggplot2 provides various functions and options, such as filter() and select(), to extract specific information from larger datasets.

False: The geom_density() function in ggplot2 creates a density plot, which visualizes the distribution of a variable as a smooth curve. It shows the relative frequency of values, but not the overall distribution of the data.

True: In ggplot2, the method="loess" argument is used in certain geom functions (e.g., geom_smooth()) to specify local regression. Loess stands for "locally weighted scatterplot smoothing," which fits a smooth curve to a scatterplot by locally estimating regression.

False: The coord_flip() function in ggplot2 flips the x and y axes, effectively transforming the Cartesian space into a transposed version. This can be useful for certain types of visualizations, such as horizontal bar charts, but it alters the orientation of the axes.

False: The theme_bw() function in ggplot2 applies a black and white theme to the plot, giving it a clean and minimalistic appearance. It does not create a brewer palette, which refers to a collection of color schemes developed by Cynthia Brewer for use in maps and data visualization. However, ggplot2 does provide functions like scale_fill_brewer() and scale_color_brewer() to apply Brewer palettes to the plot's fill and color aesthetics, respectively.

learn more about ggplot2 here:

https://brainly.com/question/30558041

#SPJ11

To ask a user to create a variable named $password with a value 12345, the code `` can be used.

Variables are used in PHP to store values in memory. A variable in PHP is a name that represents a value. Variables are used in PHP to store data, such as strings of text, numbers, and arrays. Variables in PHP start with a `$` sign, followed by the name of the variable.

The `$` sign tells PHP that the following word is a variable. Here's an example of how to create a variable named `$password` with a value of `12345`:``After the above code is executed, the `$password` variable will contain the value `12345`.

Learn more about PHP at:

https://brainly.com/question/14757990

#SPJ11

The statement given "Output will be the same if you use inorder, postorder, or preorder traversals of the same binary tree." is false because the output will be different depending on whether you use inorder, postorder, or preorder traversals of the same binary tree.

Inorder, postorder, and preorder traversals are different ways of visiting the nodes in a binary tree. Each traversal has a specific order in which the nodes are visited. Therefore, the output will vary depending on the traversal method used.

In inorder traversal, the left subtree is visited first, followed by the root node, and then the right subtree. This results in a sorted sequence of the nodes if the binary tree is a binary search tree.

In postorder traversal, the left subtree is visited first, then the right subtree, and finally the root node. This traversal is commonly used to delete nodes from a tree.

In preorder traversal, the root node is visited first, followed by the left subtree, and then the right subtree. This traversal is often used to create a copy of the tree.

You can learn more about preorder traversals at

https://brainly.com/question/30763501

#SPJ11

Here's a Java program that includes the methods `getTotal`, `getAverage`, `getHighest`, and `getLowest` to perform calculations on different one-dimensional arrays:

public class ArrayOperations {

   public static void main(String[] args) {

       int[] iarray = { 2, 1, 9, 7, 3 };

       float[] farray = { 3.5F, 4.6F, 1.7F, 8.9F, 2.1F };

       double[] darray = { 98.7, 89.2, 55.1, 77.6, 99.9 };

       long[] larray = {100, 500, 200, 300, 400 };

       System.out.println("Total of iarray: " + getTotal(iarray));

       System.out.println("Average of farray: " + getAverage(farray));

       System.out.println("Highest value in darray: " + getHighest(darray));

       System.out.println("Lowest value in larray: " + getLowest(larray));

   }

   public static int getTotal(int[] arr) {

       int total = 0;

       for (int num : arr) {

           total += num;

       }

       return total;

   }

   public static float getAverage(float[] arr) {

       float sum = 0;

       for (float num : arr) {

           sum += num;

       }

       return sum / arr.length;

   }

   public static double getHighest(double[] arr) {

       double highest = arr[0];

       for (double num : arr) {

           if (num > highest) {

               highest = num;

           }

       }

       return highest;

   }

   public static long getLowest(long[] arr) {

       long lowest = arr[0];

       for (long num : arr) {

           if (num < lowest) {

               lowest = num;

           }

       }

       return lowest;

   }

}

This program demonstrates the four methods on the given arrays and prints the corresponding results. Each method performs the required calculations on the provided array type and returns the desired output.

Learn more about array here:

https://brainly.com/question/13110890

#SPJ11

The term "gradient" is defined as:

A range from light to dark.

In visual design and art, a gradient refers to a smooth transition or blend of colors, tones, or shades from one to another. It involves a gradual change in intensity, brightness, or saturation.

When applied to a visual design work, a gradient can create depth, dimension, and visual interest. It can be used to create a sense of light and shadow, as well as to achieve various artistic effects.

learn more about gradient here

https://brainly.com/question/30249498

#SPJ11

Answer:

PRINT SERVER

Explanation:

The network administrator can find the information about how many computers in the office been used by employees are connected to the Printer  by checking the information held in the PRINT SERVER of the company.

The print server is program used to connect computers to printers over a network ( usually an office setting ). The program keeps record of how many computers are connected to the printer hence the administrator can get the information there..