The reading on the vernier caliper is determined by adding main scale and vernier scale reading.
How to measure the diameter of a piece wire
The diameter of a piece of wire can be measured using Vernier caliper.
The following steps can be used to measure the diameter of the Vernier caliper;
Take the reading on the main scaleTake the reading on the vernierAdd the reading on both scales togetherThus, the reading on the vernier caliper is determined by adding main scale and vernier scale reading.
Learn more about veriner calipers here: https://brainly.com/question/14312914
Under what conditions does the Ideal Gas Law not apply and gases are considered real? Check all that apply. High pressure low pressure high temperature low temperature.
Considering the definition of ideal gas and gas laws, The Ideal Gas Law not apply and gases are considering real under conditions of high pressure low pressure.
Definition of ideal gasAn ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other.
In other words, an ideal gas is defined as one in which all collisions between atoms or molecules are perfectly elastic and in which there are no intermolecular attractive forces, so they do not interact with each other.
Gases in general are ideal when they are at high temperatures and low pressures.
Definition of gas lawsOn the other hand, the gas laws are a set of chemical and physical laws that allow us to determine the behavior of gases in a closed system. The parameters evaluated in these laws are pressure, volume, temperature, and moles.
Summary
The Ideal Gas Law not apply and gases are considering real under conditions of high pressure low pressure.
Learn more about Ideal Gas Law:
https://brainly.com/question/4147359?referrer=searchResults
Answer:
its A and D
Explanation:
Select the correct answer. A mixture consists of glucose and water. What is the percent composition of glucose in the mixture if it contains 1. 3 moles of glucose (C6H12O6) and the total mass of the mixture is 276 grams? A. 17. 7% B. 26% C. 35% D. 77% E. 85%.
Answer:
The percent composition of glucose in the mixture is 85 % (Answer E)
Explanation:
"percent composition of glucose = (mass of glucose / mass of the mixture) x 100
Step 1: calculate the mass of glucose ( C6H12O6)
mass of glucose = moles of glucose x molar mass of glucose
molar mass of C6H12O6 = [( 12 x6) + ( 1 x12) + ( 16 x6)= 180 g/mol
mass is therefore= 1.3 moles x 180g/mol = 234 grams
Step 2: calculate the percent composition
= mass of glucose /mass of mixture x 100
= 234 g/276 g x 100 = 85 %(answer E)"
Answer: the answer is E
Explanation: plato users
How many atoms are in 1.14 mol of SO2?
2.05 x 10 ^24
A student checks the air pressure in her bicycle tires early in the morning when it is cool outside. If she measures it again later in the day when it is hotter, what will she most likely observe? The pressure is the same. The pressure has increased. The pressure has decreased.
Answer:
answer in picture
Explanation:
When temperature increases, the air molecules gets energy. The air molecule starts moving randomly. The pressure is increased in the tire.
Define entropy?Entropy is defined as a measure of randomness or disorder of a system. disorder increases over time. Energy disperses.
In tire, it is filled with air molecules, its nothing but oxygen, nitrogen, sulpurdioxide, carbondioxide etc. when the outer side temperature increases, tire starts heating.
Heat is nothing but one type of energy, energy will transfer in to molecule. Molecule starts vibrating, hitting to walls this will increases the temperature and pressure increases.
Thus, if outer temperature increases. Pressure also increases.
To find more about Energy, refer the link below:
brainly.com/question/ 8630757
#SPJ2
Identify the limiting reactant when 4.67g of SF4 reacts with 6.28g of IzOs to produce IFs and SO2.
I’m confused on what goes next.
Question 1 of 10
What does the pH of a solution represent?
A. The pH indicates how acidic or basic a solution is.
B. The pH represents the partial pressure of hydrogen gas.
C. The pH is an indicator of the salt content of a solution.
D. The pH tells how quickly a reaction reaches equilibrium.
What mass of sulfur is needed to react with iron in order to produce 42.0 grams of iron (III) sulfide?
Based on the stoichiometry of the reaction, 15.27 g of Sulfur are required to produce 42.0 g of FeS.
What is stoichiometry of a reaction??A stoichiometry of a reaction shows the ratio in which reactant molecules will combine to form products.
The balanced equation of the reaction is given below:
Fe + S -----> FeS
Molar mass of sulfur = 32 g
molar mass of iron = 56 g
molar mass of FeS = 88 g
32 g of sulfur produces 88 g of FeS
mass of sulfur that will produce 42.0 g of FeS = 32/88 * 42 = 15.27 g
Therefore, 15.27 g of Sulfur are required to produce 42.0 g of FeS.
learn more about stoichiometry at: https://brainly.com/question/16060223
Determine if a water and a sound wave are both transversal waves.
Answer:
Sound waves are longitudinal waves
Water waves are transverse waves.
Hope this helps!
How do we think that Mars lost atmospheric gas?
What basic planetary property would have had to be different for Mars to retain a thicker atmosphere?
the rocky planet was exposed to harsh and forceful solar winds, which blew the Martian atmosphere away.
Another option for thickening the atmosphere of Mars, and, in turn, raising the temperature of the planet, would be to set up solar-powered, greenhouse-gas producing factories.
1.Which of these statements about the
conservation of mass is not correct?
A.The mass of the products will be equal to the
mass of the reactants.
B.During a chemical reaction, no mass is
created or destroyed.
C.There will be the same number and type of
atoms before and after a chemical reaction.
D.All of the above are correct.
Heat from the earth is obtained by all EXCEPT:__________.
a. Gathering lava from volcanoes to boil water
b. Pumping hot spring water into homes and businesses
c. Steam from high pressure underground turn turbines
d. Drilling wells to bring hot water to the surface
We have that the source that does not produce Heat is
Drilling wells to bring hot water to the surface
Option D
Heat from the earthGenerally, Heat in this context speaks to a hot or high temperature of molecules from the earth body
Therefore,Gathering lava from volcanoes to boil water,Pumping hot spring water into homes and businesses are few example of ways the earth generate natural heat Whilst drilling wells to bring hot water to the surface is not an actual thing as water drilled out is not hot
Therefore, the source that does not produce Heat is
Drilling wells to bring hot water to the surface
Option D
For more information on Earth visit
https://brainly.com/question/24878669
1. Which location (a, b, or c) would have the highest temperature?
2. Which location(a, b, or c) would have the lowest temperature?
3. Give reasoning to explain how and why the latitude of a place on Earth affects its average temperature.
WORTH 100 POINTS! WILL MARK BRIANLESIT
Answer:
1. B
2.C
3.The further out and the closer the the equator a place on Earth is the warmer it is due to the fact that the sun directly hits countries on the equator and takes in heat faster then the north and south pole. Countries on more of a curve are colder due to the fact they are more curved and it is harder for the heat to be taken in at a curve.
B is center point line passing through earth and it's placed right infront of sun so b would have highest temperature
#2
A and C both are poles so at a and c least sun light can reach hence lowest temperature.
#3
As far as the latitude is placed from equator lower the temperatureAs near as the latitude is located from equator higher the temperatureAbin is doing work by lifting a bowling ball. Which statement could be made about the energy in this situation? Energy is being transferred from the ball to his arm muscles. Energy is being transferred from his arm muscles to the ball. Energy would be recorded in units of hertz and power. Energy would change from potential to chemical.
Any capacity for doing work is called energy. It is a quantity and can be of various forms. Energy is getting transferred from arm muscles to the ball.
What are different forms of energy?Energy is the work done by the object to perform any given task and is dependent on the factors like the distance and the force applied.
When Abin lifts the bowling ball then the object is displaced from its original position and some amount of force is applied by the arm muscles.
The chemical energy stored in the arm of Abin is a form of energy and gets transferred to the ball from the muscles so it can be lifted.
Therefore, option B. energy is transferred from the arms muscles to the ball.
Learn more about energy here:
https://brainly.com/question/2033562
Answer:
B. It is being transferred from his arm muscles to the ball.
Explanation:
got it right.
Dispersed colloids systems have the same _________________ (on the particles) which keep the particles dispersed.
Answer:
The dispersed particles of lyophobic colloidal systems have the same kind of electric charge. Particles with like charge repel each other and their mutual repulsion prevents them from joining together and settling out. The accumulation of similar kind of charges on the suspended particles holds them part and thus stabilizes the system.
Explanation:
What is the density of a cube that has a mass of 25 grams and a volume of 125 cm3
To convert it in Kg/m³ divide by 1000 and multiple with 10⁶
[tex]Density = 0.2 \: \times \frac {{10}^{6} }{10 {}^{3} } = 0.2 \times {10}^{3} \\ Density = 200 \: kg \: m {}^{ - 3} [/tex]
Please help me I just need the answers please no need for the explanation
Answer:
C = q / m x dT
Explanation:
By definition, specific heat, C = heat absorbed, q divided by mass, m and change in temperature, dT
So C = q / m x dT
Answer:
The specific heat capacity of a material is the energy required to raise one kilogram (kg) of the material by one degree Celsius (°C)
Formula:
energy (J) = mass (kg) * specific heat capacity (J/kg°C ) * change in temperature
required answer:
C = q / m * dTusing the formula:
C = [tex]\frac{102}{12.5*(55-22)}[/tex]
C = 0.2473 J/kg°C
↑
This is the specific heat capacity of copper
[tex]10 {}^{ - 16} M \: HCL \text{ \: is \: divided \: to \: 100 \: times \: its \: pH \: will \: be}[/tex]
Please Help me with this
25 Points_
[tex] \text{Given, Concentration of HCl}= 10 {}^{ - 6} M[/tex]
[tex] \text{After Dilution conc. of HCl =} \frac{10 {}^{ - 6} }{100} = {10}^{ - 8}M [/tex]
[tex] \therefore \text{pH = - log[H}^{ + } ][/tex]
[tex] \therefore \text{ pH }= - \log [{} {10}^{ - 8}] = 8[/tex]
[tex] \text{But} \: \text{This} \: \text{Is} \: \text{Not True Because} \\ \text{ An Acidic Solution Cannot have} \text{pH Greater than 7.} \\ \text{ In this case} [ {H}^{ + } ] \text{ Ions Of Water Molecule} \\ \: \text {Cannot Be Neglected.}[/tex]
Thus,[tex] {[H}^{ + } ] = {[H}^{ + } ] _{HCl} +{ [H + }^{ } ] _{H_2 O}[/tex]
As we know, ionic product[tex][H {}^{ + } ][OH {}^{ - } ] = 10 {}^{ - 14} \\ [H {}^{ + } ] = {10}^{ - 7} \\ [H {}^{ + } ] \text{total} = {10}^{ - 8} + {10}^{ - 7} \\ = {10}^{ - 8} (1 + 10) \\ = 11 \times {10}^{ - 8} [/tex]
[tex] \text{Now from, pH} = - \text{log}[H {}^{ + } ] \\ = \text{ - log}(11 \times {10}^{ - 8} ) \\ = - \text{ log}11 - \text{ log} {10}^{ - 8} \\ = 6.957[/tex]
Hope This Helps!!Question 1 (1 point)
Mackenzie adds sodium chloride and sucrose to water. Identify the solutes.
a
sodium chloride
b
water
с
sodium chloride and sucrose
d
sucrose
The solute in this case would be sodium chloride and sucrose.
SolutesSolutes are substances capable of dissolving in solvents to give homogenous mixtures known as solutions.
In this case, both sodium chloride and sucrose were added to water - water is acting as the solvent.
Sodium chloride is soluble in water and so also is sucrose.
Thus, a homogenous mixture of sodium chloride and sucrose would result.
More on solutes can be found here: https://brainly.com/question/7932885
What is gesso? a. A technique used by many Renaissance artists b. A medium used as a surface preparation or primer for a painting c. A mixture of egg yolk and pigment used to harden paint.
Gesso is a white paint blend that comprises pigment, chalk and gypsum. It is a medium utilised for surface preparation and as a primer for a painting.
What are the uses of gesso?Gesso is widely utilized for preparing surfaces and as primers by painters. They were used by painters and artists earlier to make canvas, boards for painting purposes.
It was first formulated by chalk powder dust and pigment derived from the animal skin. They are widely used because of their adhering properties.
The use of the gesso makes the paint adhere to the canvas and the board surfaces and also, makes the surface textured.
Therefore, option b. it is used for preparing the surface is correct.
Learn more about gesso here:
https://brainly.com/question/1191408
Answer:
b on edge
Explanation:
If you have 1 mole of methane gas, how many liters of methane gas do you have?
I have 22.4 litre of methane gas
2. When protein is digested by the body, what molecule do they become?
Answer:
Amino acid
Explanation:
When you eat food the body's digestive system breaks down the protein into the individual amino acids, which are absorbed and used by cells to build other proteins and a few other macromolecules, such as DNA
What makes a person scientifically literate? In three to five sentences, explain your answer.
It means that a person has the ability to describe, explain, and predict natural phenomena. Scientific literacy entails being able to read with understanding articles about science in the popular press and to engage in social conversation about the validity of the conclusions. Scientific literacy implies that a person can identify scientific issues underlying national and local decisions and express positions that are scientifically and technologically informed. A literate citizen should be able to evaluate the quality of scientific information on the basis of its source and the methods used to generate it. Scientific literacy also implies the capacity to pose and evaluate arguments based on evidence and to apply conclusions from such arguments appropriately.
hope this helps and sorry if this is wrong
i have a question so im working on a hydrology crossword puzzle and it says how acidic or basic a substance is and it only has 9 letters and its starts with p and the 3rd letter is b i need help
Answer: " PHBALANCE " .
_____________________
Explanation:
_____________________
The pH scale is logarithmic and indicates how acid or how basic a substance is.
ph balance ; as one word in a crossword puzzle,
with 9 letters ; P-H-B-A-L-A-N-C-E ; amounts to exactly 9 (nine) letters ;
And starts with a "P" ;
the 3rd letter is "B" .
_____________________
Source: Self-perception and tuition.
Hope this helps! Please let me know if the answer is correct; or if it makes sense!
_____________________
What could happen to nearby molecules if one side of a molecule has a temporary negative charge?
Answer:
The London dispersion force is a temporary attractive force that results when the electrons in two nearby atoms of two different molecules occupy positions that make the atoms form temporary dipoles (positive or negative charge).
Explanation:
what is a substance that doesn't dissole in water
Answer:
insoluble substances
Explanation:
The direct rays of the sun slowly move from 23.5° south to the
equator during what season?
Answer:
in December, so winter is the season
A compound containing only carbon and hydrogen is found to contain 80.0% carbon. It has a molecular weight of 30.0. What is its molecular formula
Answer:
(80.0, 20.0) The statement states that 80% of the compound is carbon. To acheive the amount of carbon in a 100 g sample, you need to multiply the weight of the sample by the percentage of carbon in the compound. Recall that 80%=80/100=.8 .8*100g=80g of carbon. The same process goes for the hydrogen. .2*100g=20g hydrogen. Explanation:
The ph of water is approximately 7 which means it is:.
Answer: Neutral
Explanation: This is because, in the ph scale, greater than 7 indicates base or alkaline (basic), while less than 7 indicates that it is acidic.
Explain what a chemical reaction is and moles
Answer:
A process during which chemical bonds between atoms are broken and new ones are formed, producing one or more substances.
Moles are the amount of substance that contains as many particles.
Explanation:
A chemical reaction is when a chemical change occurs for example when a nail comes into contact with air and is then exposed to air it begins to rust. It forms a red-brown substance which changes the chemical composition of the original compound.
Examples of chemical reactions:
Combustion
Oxidation (rusting)
Cooking an egg
Photosynthesis
Digestion
Fireworks
Paper Burnin
The mole is the amount of substance that contains as many particles (molecules, ions or atoms) as there are in 12g of carbon.
1 mol is the amount of substance that contains the same number of particles as there are atoms in 12.0 g of carbon-12 and that number is referred to as Avogardo's constant (6.022 x [tex]10^{23}[/tex]).
Water moves up a plant because of hydrogen bonds by a process called __________.
Answer:
transpiration
Explanation:
Transpiration is when water moves up a plant stem, because water has surface tension due to cohesion.
In water, the H is slightly positive and the O2 are both slightly negative. This creates bonds between the H and O of another molecule. This causes water to be sticky, and when water moves up a plant, other molecules are also pulled up.
Hope this helps!