Write True if the statement is correct, but if it's False, change the underlined word
or group of words to make the whole statement true. Write your answer on the space
provided before the number.
1. Heat engine is a device that converts thermal energy into mecha
work.
2. Doing mechanical work on the system will decrease its internal energy.
3. Internal energy is proportional to the change in temperature.
4. Only heat contributes to the total internal energy of the system.
5. Internal energy stored in the body is in the form of fats.
6. Heat can be completely transformed into work.
7. If the amount of work done (W) is the same as the amount of energy
transferred in by heat (Q), the net change in internal energy is 1.
8. The temperature of the system increases when work is done on the
system.

The mass of ice to be added is 0.0685 kg.

Mass of water in the beaker = m1 = 0.230 kg

Temperature of water = T1 = 83.7 °C

Specific heat of liquid water = c1 = 4190 J/kg. K

Mass of ice to be added = m2

Temperature of ice = T2 = −10.2 °C

Specific heat of ice = c2 = 2100 J/kg. K

Heat of fusion for water = L = 3.34 × 10⁵ /kg

Final temperature of the system = T3 = 29.0 °C

Since the system is insulated, heat gained by ice will be equal to the heat lost by water. So,

m1c1(T1 - T3) = mL + m2c2(T3 - T2)

{Let L be the heat of fusion for water.}

m1c1T1 - m1c1T3 = mL + m2c2T3 - m2c2

T2m2 = [m1c1(T1 - T3) - mL] / [c2(T3 - T2)]

m2 = [(0.230 kg) × (4190 J/kg. K) × (83.7 - 29.0) °C - (0.230 kg) × (3.34 × 10⁵ /kg)] / [(2100 J/kg. K) × (29.0 - (-10.2)) °C)]≈ 0.0685 kg

Therefore, the mass of ice to be added is 0.0685 kg.

Learn more about Specific heat:

https://brainly.com/question/27991746

#SPJ11

The motorcycle can round the banked turn with a speed of 34 m/s.

To determine the maximum speed at which the motorcycle can round the banked turn, we need to consider the forces acting on it. A free body diagram can help visualize these forces. In this case, the relevant forces are the gravitational force (mg) acting vertically downward, the normal force (N) perpendicular to the surface of the road, and the friction force (f) acting horizontally inward.

Since the turn is banked, a component of the normal force will provide the necessary centripetal force to keep the motorcycle moving in a circular path. The angle of the banked turn can be determined using the tangent of the angle, which is equal to the coefficient of friction (μ) multiplied by the slope of the turn (7% or 0.07). Therefore, tanθ = μ = 0.07.

By resolving the forces along the vertical and horizontal directions, we can find the equations: N - mg cosθ = 0 (vertical equilibrium) and mg sinθ - f = 0 (horizontal equilibrium). Solving these equations, we can find the normal force N and the friction force f.

The centripetal force required for circular motion is given by Fc = mv^2/r, where m is the mass of the motorcycle and rider, v is the velocity, and r is the radius of the turn. Equating Fc to the horizontal force f, we can solve for v.

Using the given values of the mass (260 kg), radius (85 m), coefficient of friction (1.2), and gravitational acceleration (9.8 m/s^2), we find that the maximum speed at which the motorcycle can round the turn is approximately 34 m/s.

Learn more about centripetal force visit:

brainly.com/question/14021112

#SPJ11

At the position (0 cm, 2.0 cm, 1.0 cm), the magnetic field strength is approximately -8.22 × 10^-13 T in the x-direction, and the magnetic field is zero in the y and z-directions.

To calculate the strength and direction of the magnetic field at a given point due to the motion of an electron, we can use the Biot-Savart law. The Biot-Savart law states that the magnetic field at a point due to a moving charged particle is given by:

B = (μ₀ / 4π) * (q * v × r) / r³

Where:

B is the magnetic field

μ₀ is the permeability of free space (4π × 10^-7 T·m/A)

q is the charge of the electron (-1.6 × 10^-19 C)

v is the velocity vector of the electron

r is the vector pointing from the electron to the point of interest

Let's calculate the magnetic field at the given point (0 cm, 2.0 cm, 1.0 cm):

Position vector r = (0 cm, 2.0 cm, 1.0 cm)

First, let's convert the position vector from centimeters to meters:

r = (0.00 m, 0.02 m, 0.01 m)

Now we can calculate the magnetic field using the given velocity vector:

v = 5.5 × 10^7 m/s in the z-direction

Plugging the values into the Biot-Savart law equation:

B = (μ₀ / 4π) * (q * v × r) / r³

B = (4π × 10^-7 T·m/A / 4π) * (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / (0.00² + 0.02² + 0.01²)^(3/2)

B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / (0.0005)^(3/2)

B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / 0.00353553

B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / 0.00353553

B ≈ (-8.22 × 10^-13 T, 0 T, 0 T)

To know more about Biot-Savart law

https://brainly.com/question/1120482

#SPJ11

Answer: 1. The work done by the force in moving the particle from x = 0 to x = 2x₀ m is 3.92 J.

2.The rate at which the force does work on the block is 334 W.

1. Finding the work done by the force in moving the particle from x = 0 to x = 2x₀ m

Using the formula, F= F₀(x/x₀ - 1)  where x is in meters and F is in Newtons, and given that F₀ = 2.2 N and x₀ = 5.9 m, we can find the work done by the force in moving the particle from x = 0 to x = 2x₀ m.

The work done by the force is equal to the change in kinetic energy. Therefore, the work done by the force in moving the particle from x = 0 to x = 2x₀ m is given by,

W = K₂ - K₁ = (1/2) mv₂² - (1/2) mv₁²

where v₂ and v₁ are the final and initial velocities, respectively, and m is the mass of the particle. In this case, since the force is in the x-direction, we know that the velocity is in the x-direction as well. Therefore, we can use the kinematic equation:

v² - u² = 2as

where v and u are the final and initial velocities, respectively, a is the acceleration, and s is the displacement. We can solve for the final velocity:v = √(u² + 2as)

Using this equation, we can find the final velocity of the particle at

x = 2x₀ m.

We know that the initial velocity is zero since the particle starts from rest. Therefore,

v₂ = √(0 + 2a(2x₀)) = √(4ax₀)

Using the force equation, we can find the acceleration of the particle:

a = F/m = F₀(x/x₀ - 1)/m

Substituting the values of F₀, x₀, and m, we get

a = (2.2 N)(x/5.9 m - 1)/(1 kg) = (2.2 N/m)(x/5.9 - 1)

v₂ = √(4ax₀)

= √(4(2.2 N/m)(2x₀/5.9 - 1)(5.9 m))

= √(17.6(2x₀/5.9 - 1))

= 2.8 m/s

Now, we can find the work done by the force in moving the particle from x = 0 to x = 2x₀ m. We know that the initial velocity is zero, so the initial kinetic energy is zero.

Therefore, W = (1/2) mv₂² = (1/2)(1 kg)(2.8 m/s)² = 3.92 J.

The work done by the force in moving the particle from x = 0 to x = 2x₀ m is 3.92 J.

2. Given that a 80 kg block is pulled at a constant speed of 3.8 m/s across a horizontal floor by an applied force of 120 N directed 43° above the horizontal.

The rate at which the force does work on the block is given by:

P = Fv cosθ

where P is the power, F is the force, v is the velocity, and θ is the angle between F and v. Substituting the values given, we get

P = (120 N)(3.8 m/s) cos 43°

= (120 N)(3.8 m/s)(0.731)

= 334 W.

The rate at which the force does work on the block is 334 W.

Learn more about work done : https://brainly.com/question/25573309

#SPJ11

The average force acted on the car during the deceleration is 7500 N.The car traveled a distance of 60 meters during the deceleration.The block does not start to move because the applied force is not sufficient to overcome the static friction.

To find the mass of a person given their weight, we use the equation weight = mass × gravity, where weight is given as 745 N. Solving for mass, we have mass = weight / gravity. Assuming standard gravity of 9.8 m/s², the mass is approximately 75.7 kg. To find the weight of a mass, we use the equation weight = mass × gravity, where mass is given as 8.20 kg. Plugging in the values, we have weight = 8.20 kg × 9.8 m/s², which gives a weight of approximately 80.2 N.

2a. To find the average force acting on the car during deceleration, we use Newton's second law, which states that force = mass × acceleration. The change in velocity is 20.0 m/s - 5.00 m/s = 15.0 m/s, and the time is given as 4.00 seconds. The acceleration is calculated as change in velocity / time, which is 15.0 m/s / 4.00 s = 3.75 m/s². Plugging in the mass of 2000 kg and the acceleration, we have force = 2000 kg × 3.75 m/s² = 7500 N.

2b. To determine the distance the car traveled during deceleration, we can use the equation of motion x = x₀ + v₀t + 0.5at². Since the car is slowing down, the final velocity is 5.00 m/s, the initial velocity is 20.0 m/s, and the time is 4.00 seconds. Plugging in these values and using the equation, we get x = 0 + 20.0 m/s × 4.00 s + 0.5 × (-3.75 m/s²) × (4.00 s)² = 60 meters.

To determine if the block starts to move, we need to compare the applied force to the maximum static friction. The equation for static friction is fs ≤ μs × N, where fs is the force of static friction, μs is the coefficient of static friction, and N is the normal force. The normal force is equal to the weight of the block, which is given as 38.4 pounds. Converting the weight to Newtons, we have N = 38.4 lb × 4.45 N/lb = 171.12 N. Plugging in the values, we have fs ≤ 0.75 × 171.12 N. Since the applied force is 21.3 pounds, which is less than the maximum static friction, the block does not start to move.

Learn more about static friction here:

https://brainly.com/question/17140804

#SPJ11

Gravitational wave signals provide information about the source, such as total mass and distance of merging black holes. Theoretical models and observations of gravitational waves help determine properties of merging black holes and their impact on the surrounding environment.

Gravitational wave signals have certain characteristics that provide valuable information about their source. The strength of a gravitational wave signal is dependent on the total mass of the black hole system undergoing a merger. By studying the amplitude of the signal, researchers can gather insights into the source. Additionally, the period of the gravitational wave signal is influenced by both the total mass of the merging black hole system and the distance to the black hole pair.

The amplitude (height) of a gravitational wave signal is affected by the total mass of the merging black hole system. A larger total mass results in a greater amplitude of the gravitational wave signal. Furthermore, the distance to the merging black hole pair also impacts the amplitude. If the black hole pair is closer, the amplitude of the gravitational wave signal will be higher.

Similarly, the period of the gravitational wave signal is influenced by the total mass of the merging black hole system. A larger total mass leads to a shorter period of the gravitational wave signal. The distance to the merging black hole pair also plays a role in determining the period. If the black hole pair is further away, the period of the gravitational wave signal will be longer.

In the case of the merging black holes with an estimated distance of 1.3 billion light-years and a total mass of 62 solar masses, these values provide the best estimate for their properties.

Theoretical models are utilized to understand the characteristics of merging black holes in galaxies located far from our own. These models enable scientists to make predictions about the properties of gravitational waves emitted by merging black hole systems. By comparing these predictions to actual observations of gravitational waves, scientists can gain valuable insights into the properties of merging black holes, such as their mass, spin, and distance. Theoretical models also help in studying the impact of black hole mergers on their surrounding environment, including the emission of high-energy particle jets.

Learn more about gravitational waves

https://brainly.com/question/27164604

#SPJ11

The magnitude of the constant acceleration required to do this is `0.0000248 m/s^2`.

Initial velocity u = 0

Distance travelled from rest, s = 267 min 11.0 s=267.1833 m

Time taken t = 267 min 11.0 s=16031 s

The equation for calculating acceleration is given by the relation;`

s = ut + 1/2at^2`

Substituting the given values we get;

267.1833=0+1/2a(16031)^2

=>`a=(267.1833)/(1/2*16031^2)`=`0.0000248 m/s^2

`Therefore, the magnitude of the constant acceleration required to do this is `0.0000248 m/s^2`.

Learn more about acceleration:

https://brainly.com/question/25876659

#SPJ11

If the net torque on an object is zero, it does not necessarily mean that the net force on the object is also zero. Therefore,the statement is false

The statement is false because the net torque and net force are independent of each other. Torque is the rotational equivalent of force and depends on the applied forces and their respective distances from the axis of rotation. The net torque on an object can be zero if the torques due to the two forces cancel each other out.

However, even if the net torque is zero, the net force on the object can still be nonzero. This is because the net force is the vector sum of all the forces acting on the object, taking into account their directions and magnitudes. If the two forces, F and F2, are not equal and opposite in direction, their individual contributions to the net force will not cancel out, resulting in a nonzero net force.

Therefore, the net torque being zero does not imply that the net force is zero. It is possible for an object to have a balance of torques but still experience a net force, leading to linear acceleration or motion.

Learn more about torque visit:

brainly.com/question/30338175

#SPJ11

Therefore, we cannot use the temperature coefficient of resistance for copper wire, which is 0.00428/°C. We would need to know the temperature coefficient of resistance for the specific wire we are using.

The temperature when the wire has a resistance of 41.6Ω is 45.7 ∘C.What is the resistance-temperature characteristic of the wire?The equation used to solve this problem isR = R0 (1 + αΔT)where R is the resistance at temperature T, R0 is the resistance at a reference temperature T0, α is the temperature coefficient of resistance, and ΔT is the difference between T and T0.Rearranging the equation givesΔT = (R - R0) / (R0α)The temperature coefficient of resistance α for a wire of unknown composition is not given. However, the resistance-temperature characteristic for most materials is known, and the temperature coefficient of resistance can be determined from it. For a copper wire, for example, α = 0.00428/°C.Substituting the given values,R0 = 36.5ΩR = 41.6ΩT0 = 26.2°CΔT = (41.6Ω - 36.5Ω) / (36.5Ω × α)For the copper wire, ΔT = (41.6Ω - 36.5Ω) / (36.5Ω × 0.00428/°C) = 28.5°C.Therefore, the temperature when the wire has a resistance of 41.6Ω is T = T0 + ΔT = 26.2°C + 28.5°C = 54.7°C.However, we were not given the material composition of the wire. Therefore, we cannot use the temperature coefficient of resistance for copper wire, which is 0.00428/°C. We would need to know the temperature coefficient of resistance for the specific wire we are using.

To know more about resistance visit:

https://brainly.com/question/29995998

#SPJ11

The thermal efficiency of the engine is 23% and the cold reservoir temperature of the carrot engine is approx. 511 °C.

Part A: The thermal efficiency of an engine can be defined as the ratio of work done by the engine to the heat energy supplied to it. It is given as: thermal efficiency = work done by the engine/heat energy supplied to the engine. From the question, work done by the engine = 180 J and heat energy exhausted to the cold reservoir = 610 J. Hence, the thermal efficiency of the engine = work done by the engine/heat energy supplied to the engine= (work done by the engine)/(heat energy supplied - heat energy exhausted to the cold reservoir)= (180 J)/(Q_h - 610 J) ... equation (1)Now, to calculate the value of Q_h, we can use the first law of thermodynamics, which states that the energy supplied to the engine is equal to the sum of work done by the engine and heat energy exhausted to the cold reservoir. Mathematically, it can be represented as: energy supplied to the engine = work done by the engine + heat energy exhausted to the cold reservoir Q_h = work done by the engine + heat energy exhausted to the cold reservoir= 180 J + 610 J= 790 J. Now, substituting this value in equation (1), we get: thermal efficiency = (180 J)/(790 J)= 0.23 or 23% (approx). Hence, the thermal efficiency of the engine is 23% (approx).

Part B: Let T_h and T_c be the hot and cold reservoir temperatures of the Carnot engine, respectively. Then, the thermal efficiency of a Carnot engine is given by: thermal efficiency = (T_h - T_c)/T_h= (T_h/T_h) - (T_c/T_h)= 1 - (T_c/T_h)Since the Carnot engine has the same thermal efficiency as the given engine, we can equate the two expressions and solve for T_c. That is,0.23 = 1 - (T_c/T_h)T_c/T_h = 1 - 0.23 = 0.77T_c = 0.77 × T_h. Now, given that T_h = 390 °C (note that the temperature must be converted to Kelvin), we can calculate the value of T_c as:T_c = 0.77 × T_h= 0.77 × (390 + 273) K= 0.77 × 663 K= 511 K (approx)Thus, the cold-reservoir temperature of the Carnot engine is approximately 511 °C.

Learn more about thermal efficiency:

https://brainly.com/question/24244642

#SPJ11

The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.

The given photon strikes a deuteron and splits it into a proton and a neutron. We need to calculate the released kinetic energy in the unit of MeV.Given, wavelength of the photon, λ = 3.50 × 10^-13 mSpeed of light, c = 3 × 10^8 m/sPlanck’s constant, h = 6.63 × 10^-34 J.sThe energy of a photon, E = hc/λThe energy of the photon is calculated as follows:E = hc/λ= (6.63 × 10^-34 J.s × 3 × 10^8 m/s)/ 3.50 × 10^-13 m= 5.68 × 10^-19 J

The above energy of the photon is used to split the deuteron into proton and neutron. As the deuteron is split into two particles, the total mass of the two particles is equal to the mass of the deuteron, m. The mass of the proton is 1.00728 amu, and the mass of the neutron is 1.00866 amu.

Thus, the total mass of the two particles is m = 2.01594 amu. (amu is the atomic mass unit)The mass of 1 amu is 1.66054 × 10^-27 kg.The total mass, m = 2.01594 amu = 2.01594 × 1.66054 × 10^-27 kg = 3.34402 × 10^-27 kgAs the deuteron splits into proton and neutron, there is a decrease in the mass of the particles by an amount Δm.Δm = 2m(1 - mp/m)

Where mp is the mass of the proton and m is the mass of the deuteron.Substituting the values,Δm = 2 × 3.34402 × 10^-27 (1 - 1.00728/2.01594)= 2.22557 × 10^-29 kgThe kinetic energy released in this reaction is given by E = Δmc^2Substituting the values,E = Δmc^2= (2.22557 × 10^-29 kg) × (3 × 10^8 m/s)^2= 2.00301 × 10^-12 JConverting this to MeV,1 eV = 1.602 × 10^-19 J1 MeV = 10^6 eVThus, E = 2.00301 × 10^-12 J= (2.00301 × 10^-12 J)/(1.602 × 10^-19 J/MeV)= 12.48 MeV

The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.

to know more about kinetic energy

https://brainly.com/question/16983571

#SPJ11

The sound level produced by the fireworks explosion at your location is approximately 104.8 dB that can be calculated using the given information of power and distance.

To calculate the sound level produced by the fireworks explosion, we can use the formula for sound intensity level (L), which is given by L = 10 log(I/I0), where I is the sound intensity and I0 is the reference intensity [tex](10^{(-12)} W/m^2)[/tex].

First, we need to calculate the sound intensity (I) at the location directly below the explosion. Since the sound radiates equally in all directions, we can assume that the sound energy is spread over the surface of a sphere with a radius equal to the distance from the explosion.

The power (P) of the sound is given as 75 kW. We can use the formula [tex]P = 4\pi r^2I[/tex], where r is the distance from the explosion (25 m in this case), to calculate the sound intensity (I). Rearranging the formula, we have [tex]I = P / (4\pi r^2)[/tex].

Substituting the values into the formula, we get [tex]I = 75,000 / (4\pi(25^2)) = 75,000 / (4\pi(625)) = 0.03 W/m^2.[/tex]

Now, we can calculate the sound level (L) using the formula L = 10 log(I/I0). Substituting the values, we have[tex]L = 10 log(0.03 / 10^{(-12)}) = 10 log(3 * 10^1^0) ≈ 10 * 10.48 = 104.8 dB.[/tex]

Therefore, the sound level produced by the fireworks explosion at your location is approximately 104.8 dB.

Learn more about sound intensity here:

https://brainly.com/question/32194259

#SPJ11

The magnitude of the electric field is 5.12 × 10^6 N/C, and it is directed upwards.

In order for the charged object to be in static equilibrium, the electric force acting on it must balance the gravitational force. The electric force experienced by the object can be calculated using the equation F = qE, where F is the force, q is the charge of the object, and E is the electric field.

Given that the mass of the object is 4.00 g (or 0.004 kg) and the charge is -19.5 μC (or -1.95 × [tex]10^{-8}[/tex] C), we can calculate the gravitational force acting on the object using the equation F_gravity = mg, where g is the acceleration due to gravity (approximately 9.8 [tex]m/s^2[/tex]).

Since the object is in equilibrium, the electric force and the gravitational force are equal in magnitude but opposite in direction. Therefore, we have F = F_gravity. Substituting the values, we get qE = mg, which can be rearranged to solve for the electric field E.

Plugging in the known values, we have (-1.95 × [tex]10^{-8}[/tex] C)E = (0.004 kg)(9.8 [tex]m/s^2[/tex]). Solving for E gives us E = (0.004 kg)(9.8 [tex]m/s^2[/tex])/(-1.95 × [tex]10^-8[/tex] C) ≈ 5.12 × [tex]10^6[/tex] N/C.

The negative charge on the object indicates that the direction of the electric field is directed upwards, opposite to the direction of the gravitational force.

Learn more about electric field here ;

https://brainly.com/question/30544719

#SPJ11

The angular momenta about its own axis is7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex].The angular momenta of earth around the sun is 2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]

To calculate the angular momenta of the Earth, we need to consider two components: Angular momentum due to the Earth's rotational motion about its own axis (causing day and night).

Angular momentum due to the Earth's rotational motion around the Sun (causing season change).Let's calculate each component separately:

Angular momentum due to the Earth's rotational motion about its own axis:The formula for angular momentum is given by L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

The moment of inertia for a solid sphere rotating about its axis is given by I = (2/5) * M * R^2, where M is the mass of the Earth and R is the radius of the Earth.

The angular velocity of the Earth's rotation about its own axis is approximately ω = 2π/T, where T is the period of rotation. The period of rotation for the Earth is approximately 24 hours, which is equivalent to 86,400 seconds.

Substituting the values into the formula, we have:

L1 = I * ω = (2/5) * M * R^2 * (2π / T)=7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex]

Angular momentum due to the Earth's rotational motion around the Sun:The formula for angular momentum in this case is also L = Iω, but the moment of inertia and angular velocity are different.

The moment of inertia for a planet rotating around an axis passing through its center and perpendicular to its orbital plane is given by I = M * R^2, where M is the mass of the Earth and R is the average distance from the Earth to the Sun (approximately 149.6 million kilometers).

The angular velocity for the Earth's rotation around the Sun is approximately ω = 2π / T', where T' is the period of revolution. The period of revolution for the Earth around the Sun is approximately 365.25 days, which is equivalent to approximately 31,557,600 seconds.

Substituting the values into the formula, we have:

L2 = I * ω = M * R^2 * (2π / T')=2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]

Please note that the above calculations assume certain idealized conditions and do not take into account factors such as the Earth's axial tilt or variations in orbital speed due to elliptical orbits.

Learn more about angular momenta here ;

https://brainly.com/question/13262295

#SPJ11

The capacitance of the capacitor is 53.12 pF.

The formula to calculate the capacitance of the capacitor is given as;

C = ε * A/d Where,

C is capacitance of the capacitor,

ε is the permittivity of the insulating material placed between the plates,

A is the area of the plates of the capacitor,

d is the separation between the plates of the capacitor.

The given area A = 3cm² = 3 × 10⁻⁴ m²

The given separation between the plates d = 0.5 mm = 0.5 × 10⁻³ m

Now, the permittivity of air is taken as 8.854 × 10⁻¹² F/m

C = ε * A/d

C = (8.854 × 10⁻¹² F/m) * (3 × 10⁻⁴ m²) / (0.5 × 10⁻³ m) = 53.124 × 10⁻¹² F = 53.12 pF

Therefore, the capacitance of the capacitor is 53.12 pF.

Learn more about capacitance https://brainly.com/question/30529897

#SPJ11

The net work done by the thieves on the safe is 173.644 Joules, the work done by the gravitational force is -17364 Joules, and the normal force does no work.

The final speed of the safe at the end of the 8.5 m displacement is approximately 2.29 m/s.

To solve this problem, we need to calculate the net work done by the thieves, the work done by the gravitational force, and the work done by the normal force. We can then use the work-energy theorem to find the final speed of the safe.

1. Net Work Done by the Thieves:

The net work done by the thieves can be calculated by adding the work done by each thief. The work done by a force is given by the equation: work = force * displacement * cos(angle).

Thief 1:

Force = 12.0 N

Displacement = 8.5 m

Angle = 30°

Work1 = 12.0 N * 8.5 m * cos(30°)

Thief 2:

Force = 10.0 N

Displacement = 8.5 m

Angle = 40°

Work2 = 10.0 N * 8.5 m * cos(40°)

Net Work Done by the Thieves = Work1 + Work2

2. Work Done by the Gravitational Force:

The work done by the gravitational force can be calculated using the equation: work = force * displacement * cos(angle).

Force (weight) = mass * gravitational acceleration

mass = 225 kg

gravitational acceleration = 9.8 m/s² (approximate value on Earth)

Displacement = 8.5 m

Angle = 180° (opposite direction of displacement)

Work done by the gravitational force = (225 kg * 9.8 m/s²) * 8.5 m * cos(180°)

3. Work Done by the Normal Force:

Since the safe is on a flat surface and not accelerating vertically, the normal force does no work. The normal force is perpendicular to the displacement, so the angle between them is 90°, and cos(90°) = 0.

Work done by the normal force = 0

4. Final Speed of the Safe:

We can use the work-energy theorem to find the final speed of the safe. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy.

Net Work Done by the Thieves = Change in Kinetic Energy

Since the safe was initially at rest, the initial kinetic energy is zero. Therefore, the net work done by the thieves is equal to the final kinetic energy.

Net Work Done by the Thieves = (1/2) * mass * final speed^2

We can solve this equation for the final speed:

(1/2) * mass * final speed² = Net Work Done by the Thieves

final speed² = (2 * Net Work Done by the Thieves) / mass

final speed = √((2 * Net Work Done by the Thieves) / mass)

Now, let's calculate the values:

1. Net Work Done by the Thieves:

Work1 = 12.0 N * 8.5 m * cos(30°)

Work2 = 10.0 N * 8.5 m * cos(40°)

Net Work Done by the Thieves = Work1 + Work2

2. Work Done by the Gravitational Force:

Work done by the gravitational force = (225 kg * 9.8 m/s²) * 8.5 m * cos(180°)

3. Work Done by the Normal Force:

Work done by the normal force = 0

4. Final Speed of the Safe:

final speed = √((2 * Net Work Done by the Thieves) / mass)

Now, let's calculate these values:

Calculations:

Work1 = 12.0 N * 8.5 m * cos(30°) = 102.180 J

Work2 = 10.0 N * 8.5 m * cos(40°) = 71.464 J

Net Work Done by the Thieves = Work1 + Work2 = 173.644 J

Work done by the gravitational force = (225 kg * 9.8 m/s^2) * 8.5 m * cos(180°) = -17364 J (negative sign indicates work done against the gravitational force)

Work done by the normal force = 0 J

final speed = √((2 * Net Work Done by the Thieves) / mass) = sqrt((2 * 173.644 J) / 225 kg) = 2.29 m/s (approximately)

Therefore, the net work done by the thieves on the safe is 173.644 Joules, the work done by the gravitational force is -17364 Joules, and the normal force does no work. The final speed of the safe at the end of the 8.5 m displacement is approximately 2.29 m/s.

To learn more about gravitational force visit:

brainly.com/question/32609171

#SPJ11

An incandescnet light bulb generates an unpolarized light beam that is directed towards three polarizing filters. Percent transmitted =is given by (Total intensity / I₀) * 100

When an unpolarized light beam passes through a polarizing filter, it becomes partially polarized, meaning its electric field vectors align in a specific direction. The intensity of the light passing through the filter depends on the angle between the transmission axis of the filter and the polarization direction of the light.

In this case, we have three polarizing filters:

1. First filter: Transmission axis is horizontal (0° from the horizontal).

2. Second filter: Transmission axis is 20.0° from the horizontal.

3. Third filter: Transmission axis is 40.0° from the horizontal.

The intensity of light passing through each filter is given by Malus' Law:

I = I₀ * cos²(θ)

Where I₀ is the initial intensity of the light, and θ is the angle between the polarization direction of the light and the transmission axis of the filter.

For the first filter with a horizontal transmission axis, the angle θ is 0°. Therefore, the intensity remains unchanged: I₁ = I₀.

For the second filter with a transmission axis 20.0° from the horizontal, the angle θ is 20.0°. The intensity passing through the second filter is given by: I₂ = I₀ * cos²(20.0°).

For the third filter with a transmission axis 40.0° from the horizontal, the angle θ is 40.0°. The intensity passing through the third filter is given by: I₃ = I₀ * cos²(40.0°).

To find the total intensity of light passing through the combination of filters, we multiply the intensities of each filter together:

Total intensity = I₁ * I₂ * I₃ = I₀ * cos²(20.0°) * cos²(40.0°)

To find the percentage of light transmitted, we divide the total intensity by the initial intensity I₀ and multiply by 100:

Percent transmitted = (Total intensity / I₀) * 100

By substituting the values and calculating, we can determine the percentage of light that gets through the combination of filters.

It's important to note that the percentage of light transmitted will depend on the specific values of the angles and the characteristics of the polarizing filters used.

Learn more about polarizing filter here:

https://brainly.com/question/32292128

#SPJ11

The correct answer is A) the component of gravity acting along the plane of the ramp has increased.

When an object sits on a ramp, its weight (which is the force due to gravity) can be resolved into two components: one perpendicular to the ramp (the normal force) and one parallel to the ramp. The parallel component of the weight, often referred to as the force of gravity acting along the ramp, determines the frictional force between the shoe and the ramp. For the shoe to remain at rest, the force of static friction between the shoe and the ramp must be equal to or greater than the parallel component of the weight. This static friction counteracts the tendency of the shoe to slide down the ramp.

As the angle of the ramp is increased, the ramp becomes steeper, and the angle between the ramp and the vertical direction increases. Consequently, the parallel component of the weight, which is responsible for the frictional force, increases. This increase in the parallel component of the weight provides a greater force to overcome static friction, allowing the shoe to start moving. Therefore, the shoe starts to move because the component of gravity acting along the plane of the ramp (parallel to the ramp) has increased.

Learn more about gravity here:

https://brainly.com/question/2888262

#SPJ11

The change in gravitational potential energy is - 3.31 x 10¹⁹ J.

Mass of the Earth, m = 6 x 10²⁴ kg

Radius of the Earth, r = 6.4 x 10⁶ m

Universal gravitational constant, G = 6.7×10⁻¹¹ N-m²/kg²

Mass of spacecraft, m = 9500 kg

At the surface of the Earth, the gravitational potential energy of the Earth+spacecraft system is given by;

U₁ = - GMm/R

Here,

M = mass of the Earth = 6 x 10²⁴ kg

m = mass of the spacecraft = 9500 kg

R = radius of the Earth = 6.4 x 10⁶ m

G = Universal gravitational constant = 6.7×10⁻¹¹ N-m²/kg²

U₁ = - (6.7×10⁻¹¹) x (6 x 10²⁴) x (9500) / (6.4 x 10⁶)

U₁ = - 8.407 x 10¹⁰ J

At a distance of 5 times the radius of the Earth from the Earth's center, the gravitational potential energy of the Earth+spacecraft system is given by;

U₂ = - GMm/2r

Here,

r = 5 x r = 5 x 6.4 x 10⁶ = 32 x 10⁶ m

U₂ = - (6.7×10⁻¹¹) x (6 x 10²⁴) x (9500) / (2 x 32 x 10⁶)

U₂ = - 1.171 x 10¹⁰ J

The change in gravitational potential energy of the Earth+spacecraft system between when it was at the surface and when it reaches a location that is 5 times the radius of the Earth away from the Earth's center is;

ΔU = U₂ - U₁

ΔU = - 1.171 x 10¹⁰ - (- 8.407 x 10¹⁰)

ΔU = - 3.31 x 10¹⁹ J

Therefore, the change in gravitational potential energy of the Earth+spacecraft system between when it was at the surface and when it reaches a location that is 5 times the radius of the Earth away from the Earth's center is - 3.31 x 10¹⁹ J.

Learn more about gravitational potential energy:

https://brainly.com/question/15896499

#SPJ11

In a perfectly elastic collision, mass, mechanical energy, and momentum are conserved.

In a perfectly elastic collision, two objects collide and then separate without any loss of kinetic energy. This means that the total mechanical energy of the system remains constant before and after the collision. The conservation of mechanical energy implies that no energy is lost to other forms, such as heat or sound, during the collision.

Additionally, the law of conservation of momentum holds true in a perfectly elastic collision. Momentum, which is the product of an object's mass and velocity, is conserved before and after the collision. This means that the total momentum of the system remains constant, even though the individual objects involved in the collision may experience changes in their velocities.

Lastly, the conservation of mass is another important aspect of a perfectly elastic collision. The total mass of the system, which includes all the objects involved in the collision, remains constant throughout the collision. This principle holds true as long as there is no external force acting on the system that could change the mass.

In conclusion, a perfectly elastic collision conserves mass, mechanical energy, and momentum. These principles are fundamental to understanding the behavior of objects interacting through collisions, and they provide valuable insights into the dynamics of physical systems.

Learn more about  perfectly elastic collision:

https://brainly.com/question/14517456

#SPJ11

The wavelengths of the electrons at maximum speed 730km/s and 500 km/s are 1.008 × 10^-12 km and 6.9× 10^-13 km respectively.

Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire.

Wavelength can also be defined as the distance between two successive crest or trough.

Work function of a surface is the minimum energy required to a free electrons to come out of the metal surface.

W = h( v/λ)

where h is the Planck constant = 6.63 × 10^-34 J/s

Therefore;

4.80 × 10^-19 = 6.63 × 10^-34 × 730/λ

λ = 6.63 × 10^-34 × 730)/4.80 × 10^-19

λ = 1.008 × 10^-12 km

Also

4.80 × 10^-19 = 6.63 × 10^-34 × 500/λ

λ = 6.63 × 10^-34 × 500)/4.80 × 10^-19

λ = 6.9× 10^-13 km

Therefore the wavelengths are 1.008 × 10^-12 km and 6.9× 10^-13 km

learn more about wavelength from

https://brainly.com/question/10728818

#SPJ4

Tthe magnitude and direction of the velocity of the canoe relative to the ground is 0.66 m/s at 30° south of east, which corresponds to option ( i ).

The magnitude and direction of the velocity of the canoe relative to the ground is 0.66 m/s at 30° south of east.

To find the velocity of the canoe relative to the ground, we can add the velocities of the canoe relative to the river and the river relative to the ground. The velocity of the canoe relative to the river is given as 0.33 m/s south. The velocity of the river relative to the ground is given as 0.57 m/s east.

To add these velocities, we can use vector addition. The magnitude of the resultant velocity is found by taking the square root of the sum of the squares of the individual velocities. So, √((0.33)^2 + (0.57)^2) = 0.66 m/s.

The direction of the resultant velocity can be found using trigonometry. The angle can be calculated as arctan(0.33/0.57) = 30°. Since the canoe's velocity is south relative to the river and the river's velocity is east relative to the ground, the resultant velocity will be south of east.

Learn more about  magnitude and direction of the velocity:

https://brainly.com/question/14413826

#SPJ11

43. Precipitation hardening is a heat treatment technique used to strengthen certain alloys by creating a fine dispersion of precipitates within the material, increasing its strength and hardness.

44. Diffusion is driven by two things: concentration gradient (difference in concentration) and temperature gradient (difference in temperature).

45. Diffusion processes can be in two states: Fickian diffusion and Non-Fickian diffusion.

46. Fick's first law and Fick's second law pertain to Fickian diffusion, which is the diffusion process governed by concentration gradients and follows Fick's laws.

Heat is a form of energy that is transferred between objects or systems due to temperature difference. It flows from hotter regions to colder regions until thermal equilibrium is reached. Heat can be transferred through conduction, or radiation. It is measured in units of joules (J) or calories (cal) and plays  crucial role in thermodynamics and understanding thermal processes.

Learn more about heat here:

https://brainly.com/question/934320

#SPJ11

Given data: Diameter of the wheel (D) = 25 mInitial angular velocity (ω₁) = 149 rpmFinal angular velocity (ω₂) = 270 rpmTime taken (t) = 2.35 s.

Formula used:We know that acceleration of an object is given bya = (ω₂ - ω₁) / tThe angular velocity of an object is given byω = 2πn / 60where,n = number of rotations in 1 second.

Therefore, the angular velocity (ω) of the wheel can be calculated as:ω₁ = 2πn₁ / 60 => n₁ = ω₁ * 60 / 2πω₂ = 2πn₂ / 60 => n₂ = ω₂ * 60 / 2πa = (ω₂ - ω₁) / ta = (270 - 149) / 2.35a = 94.468 rad/s²Let the angular velocity of the wheel after 50 s be ω₃Number of rotations in 1 second = 1 / 60Total number of rotations after 50 s = 50 / 60 = 5 / 6s = ω₁t + (1/2)at²s = 149 * 2.35 + (1/2) * 94.468 * (2.35)²s = 451.50 m.

After 5 / 6 rotations, the distance covered by the wheel can be calculated as follows: Distance covered in 1 rotation = πD = 3.14 * 25 mDistance covered in 5 / 6 rotations = (5 / 6) * 3.14 * 25 m = 130.90 mThe time taken to cover this distance can be calculated as:t = s / vt = 130.90 / (25 * ω₃)t = 5.236 / ω₃Now, we can write the equation for angular velocity as:50 / 60 = ω₁ * 50 + (1/2) * 94.468 * (50)² + (1/2) * 94.468 * (5.236 / ω₃)² + ω₃ * (5.236 / ω₃)ω₃² - 10.472ω₃ + 143.245 = 0Using the quadratic formula, we get,ω₃ = [ 10.472 ± sqrt((10.472)² - 4(143.245)(1)) ] / 2ω₃ = [ 10.472 ± 42.348 ] / 2ω₃ = 26.410 rad/s (approx)Therefore, the angular velocity of the wheel 50 s after it has started accelerating is approximately 26.410 rad/s. Answer: 26.410

Learn more on angular velocity here:

brainly.in/question/3888739

#SPJ11

To produce 21.6g of silver, a 5.00A current must flow through the Ag+ solution for approximately 8.00 minutes.

To calculate the time required for a certain amount of silver to be produced, we can use Faraday's law of electrolysis, which states that the amount of substance produced is directly proportional to the quantity of electricity passed through the electrolytic cell.

First, we need to calculate the number of moles of silver produced. We can do this by dividing the mass of silver (21.6g) by its molar mass (107.9g/mol):

21.6g / 107.9g/mol = 0.200 mol

Next, we use Faraday's law to relate the moles of silver to the quantity of electricity passed through the solution:

moles of silver = (quantity of electricity) / (Faraday's constant)

The quantity of electricity can be calculated using the formula:

quantity of electricity = current (A) × time (s)

Rearranging the formula, we can solve for time:

time = (moles of silver × Faraday's constant) / Current

Plugging in the values, we get:

time = (0.200 mol × 96,485C/mol e-) / 5.00A = 3,877.4s

Converting seconds to minutes by dividing by 60:

3,877.4s / 60s/min ≈ 64.6 min

Rounding to three significant figures, the time required is approximately 8.00 minutes.

To know more about the current flow click here:

https://brainly.com/question/32670215

#SPJ11

The problem requires determining the amount of charge on a particle moving in a circular path perpendicular to a magnetic field. The charge on the particle is approximately 0.0111 Coulombs.

When a charged particle moves in a magnetic field perpendicular to its velocity, it experiences a force that causes it to move in a circular path. This force is given by the equation F = qvB, where F is the magnetic force, q is the charge on the particle, v is its velocity, and B is the magnetic field strength.

In this case, the mass of the particle (m = 0.0020 kg), its velocity (v = 2.0 m/s), and the magnetic field strength (B = 3.0 T) is given. The centripetal force required to keep the particle in a circular path is given by:

[tex]F = mv^2/r[/tex], where r is the radius of the circular path.

By equating the magnetic force and the centripetal force,

[tex]qvB = mv^2/r[/tex]

Rearranging the equation gives [tex]q = (mv^2)/(rB)[/tex]

Plugging in the given values,

[tex]q = (0.0020 kg * (2.0 m/s)^2) / (0.12 m * 3.0 T)[/tex].

Calculating the expression yields q ≈ 0.0111 C.

Therefore, the charge on the particle is approximately 0.0111 Coulombs.

Learn more about magnetic fields here:

https://brainly.com/question/14848188

#SPJ11

The resultant velocity of the plane, relative to the ground (groundspeed) is approximately 315.82 km/hr which is calculated using a trigonometric approach.

To find the groundspeed of the plane, we need to calculate the resultant velocity by considering the vector addition of the plane's airspeed and the wind velocity.

First, we decompose the airspeed into its components. The southward component of the airspeed can be found by multiplying the airspeed (662 km/hr) by the sine of the angle between the direction of the airspeed and the south direction ([tex]28.0^0[/tex]). This gives us a southward airspeed component of approximately 309.81 km/hr.

Next, we decompose the wind velocity into its components. The westward component of the wind velocity is obtained by multiplying the wind velocity (77.5 km/hr) by the cosine of the angle between the wind direction and the east direction ([tex]180^0 - 75^0 = 105^0[/tex]). This gives us a westward wind component of approximately 31.59 km/hr.

Now, we can find the resultant velocity by adding the components. The groundspeed is the magnitude of the resultant velocity and can be calculated using the Pythagorean theorem. The groundspeed is approximately 315.82 km/hr.

To summarize, the resultant velocity of the plane, relative to the ground, is approximately 315.82 km/hr. This is obtained by considering the vector addition of the plane's airspeed and the wind velocity.

Learn more about velocity here:

https://brainly.com/question/30559316

#SPJ11

The magnitude of the force acting on the electron due to its interaction with Earth's magnetic field is 1.61 × [tex]10^{-17}[/tex] N and force on the electron is perpendicular to both the velocity and the magnetic field direction. Since the force is perpendicular to the Earth's surface, it is parallel to the Earth's surface.

(a) To calculate the magnitude of the force acting on the electron due to its interaction with Earth's magnetic field, we can use the formula:

F = q * v * B * sin(θ)

where:

F is the magnitude of the force,

q is the charge of the electron (1.6 × 10^-19 C),

v is the velocity of the electron (2.52 × 10^6 m/s),

B is the magnitude of Earth's magnetic field (0.253 × 10^-4 T),

θ is the angle between the velocity and the magnetic field (90° since the velocity is perpendicular to the magnetic field).

Plugging in the values, we have:

F = (1.6 × 10^-19 C) * (2.52 × 10^6 m/s) * (0.253 × 10^-4 T) * sin(90°)

Simplifying the expression, we get:

F = 1.61 × [tex]10^{-17}[/tex] N

Therefore, the magnitude of the force acting on the electron is 1.61 × [tex]10^{-17}[/tex] N.

(b) The force on the electron is perpendicular to both the velocity and the magnetic field direction.

Since the force is perpendicular to the Earth's surface, it is parallel to the Earth's surface.

Learn more about Earth's magnetic field here:

https://brainly.com/question/18403251

#SPJ11

The initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.

To solve this problem, we can use the concept of the rocket equation. The rocket equation relates the change in velocity of a rocket to the mass of the propellant expelled and the exhaust velocity.

The rocket equation is given by:

Δv = v * ln(mi / mf)

Where:

Δv = Change in velocity

v = Exhaust velocity

mi = Initial mass of the rocket (including propellant)

mf = Final mass of the rocket (after all the propellant is expended)

In this case, we are given the following values:

v = -7000 m/s (exhaust velocity)

mf = 60000 kg (final mass)

t = 5 minutes = 5 * 60 seconds = 300 seconds (burn time)

B = 50 kg/s (burn rate)

We need to find the initial mass (mi) and initial velocity (vi).

Let's start by finding mi using the burn rate (B) and the burn time (t):

mi = mf + B * t

= 60000 kg + 50 kg/s * 300 s

= 60000 kg + 15000 kg

= 75000 kg

Now we can plug the values of mi, mf, and v into the rocket equation to find the initial velocity (vi):

Δv = v * ln(mi / mf)

Simplifying, we get:

Δv / v = ln(mi / mf)

Now substitute the given values:

Δv = -7000 m/s (exhaust velocity)

mi = 75000 kg (initial mass)

mf = 60000 kg (final mass)

-7000 / v = ln(75000 / 60000)

To find v, we can rearrange the equation:

v = -7000 / ln(75000 / 60000)

Calculating this expression, we find:

v ≈ -8074.9 m/s

Therefore, the initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.

To learn more about rocket equation visit:

brainly.com/question/32965515

#SPJ11

The maximum safe depth of the submarine is approximately 10,317 meters can be determined by calculating the pressure exerted on the window and comparing it to the manufacturer's stated limit.

To calculate the maximum safe depth of the submarine, we need to consider the pressure exerted on the window. The pressure exerted by a fluid is given by the equation P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the depth. In this case, the fluid is seawater.

First, we need to determine the pressure exerted on the window at the maximum safe depth. The pressure inside the submarine is maintained at 1.0 atm, which is equivalent to 101,325 Pa. We can assume that the density of seawater is approximately [tex]1,030 kg/m^3[/tex] and the acceleration due to gravity is [tex]9.8 m/s^2[/tex].

Using the equation P = ρgh, we can rearrange it to solve for h: h = P / (ρg). Plugging in the values, we have h = [tex]101,325 Pa / (1,030 kg/m^3 * 9.8 m/s^2)[/tex], which gives us the maximum safe depth of the submarine.

To find out the numerical value, we need to evaluate the expression. The maximum safe depth of the submarine is approximately 10,317 meters.

Learn more about acceleration due to gravity here:

https://brainly.com/question/29135987

#SPJ11