The unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area is equal to 90 degrees.2. The formula of the work done (W) is: W = F × d × cos(θ), where F is the force, d is the displacement, and θ is the angle between the force and displacement.3. The relation between the electric field (E) and the electric potential (V) is E = -dV/dx, where dx is the distance between the points where the potential is measured.
4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by C = εA/d, where ε is the permittivity of the medium between the plates.5. The charge (Q) stored in a capacitor can be given by Q = CV, where C is the capacitance and V is the potential difference between the plates.
6. The product of the resistance of a conductor (R) and the current passing through it (I) is P = VI, where P is the power dissipated by the conductor.7. The unit of the magnetic flux density is tesla (T).8. A region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a conclusion:In conclusion, the maximum value of electric flux is attained when the uniform electric field (E) and the surface normal of the area are 90 degrees apart.
Additionally, the formula of the work done (W) is W = F × d × cos(θ), and the capacitance of a parallel plate capacitor is given by C = εA/d. The relationship between the electric field (E) and the electric potential (V) is E = -dV/dx, and the charge (Q) stored in a capacitor can be given by Q = CV.
Finally, the unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
Learn more about electric here,
https://brainly.com/question/14306881
#SPJ11
A metal cylindrical wire of radius of 1.2 mm and length 4.2 m has a resistance of 42 Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 3.1 mm and length 4.2 m ? (in Ohms)
The resistance of the wire having square cross-sectional area is 19.78 Ω.
The resistance of the wire having square cross-sectional area can be determined using the given formula; Resistance = resistivity * (length / area)Where; resistivity = resistivity of the material,length = length of the wire,area = area of cross-sectional of the wire
The formula shows that resistance is inversely proportional to area. Therefore, an increase in area would result in a decrease in resistance.The resistance of the cylindrical wire is given as 42 Ω, and the radius of the wire is 1.2 mm.The cross-sectional area of the cylindrical wire can be given as:
Area of circle = [tex]\pi r^2\pi[/tex]= 22/7r = 1.2 [tex]mm^2[/tex]
The area of cross-sectional of the cylindrical wire is given by:Area = [tex]πr^2[/tex]
Area = 22/7[tex](1.2)^2[/tex]
Area = 4.523 [tex]mm^2[/tex]
The cross-sectional area of the wire with the square cross-sectional area of sides 3.1 mm is given as; Area = [tex]a^2[/tex]
Area = [tex](3.1)^2[/tex]
Area = 9.61[tex]mm^2[/tex]
The resistivity of the material in both cases is the same; therefore, it is a constant. Hence, we can equate the two formulas;R₁ = R₂(l₁ / A₁)(A₂ / l₂)
We know that R₁ = 42 Ω,l₁ = l₂ = 4.2 m,A₁ = 4.523[tex]mm^2[/tex],A₂ = 9.61[tex]mm^2[/tex]
R₂ = R₁ (A₁ / A₂)R₂ = 42(4.523 / 9.61)R₂ = 19.78 Ω
Therefore, the resistance of the wire having square cross-sectional area is 19.78 Ω.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
Mary is an avid game show fan and one of the contestants on a popular game show. She spins the wheel and after 1.5 revolutions, the wheel comes to rest on a space that has a $1,500.00 prize. If the Initial angular speed of the wheel is 3.20 rad/s, find the angle through which the wheel has turned when the angular speed is 1.60rad/s. _________________
First consider the one-and-one-half revolutions to find the angular acceleration of the wheel. rev
Answer: the wheel has turned through an angle of 6.74 radians when the angular speed is 1.60 rad/s.
Here's a step by step explanation :
Step 1: Let's find the angular acceleration of the wheel using the first condition. I
ω1 = 3.20 rad/s.
Number of revolutions = 1.5 revolutions.
Time taken to complete 1.5 revolutions, t = 1.5 x 1/f = 1.5 x 1/T
where f = frequency = 1/T (T = time period).
Now, the wheel rotates 1 revolution in T seconds and rotates 1.5 revolutions in 1.5T seconds. Taking time for 1 revolution, T = 1/f
Initial angular displacement, θ1 = (1.5 revolutions) x (2π radians/revolution) = 3π radians.
Final angular displacement, θ2 = 0 rad. The angular acceleration of the wheel: ω2 = ω1 + αtθ2 = θ1 + ω1t + 0.5 α t².
At the end, angular speed of the wheel,
ω2 = 0 rad/sθ2
= θ1 + ω1t + 0.5 α t²0
= θ1 + ω1 (1.5T) + 0.5 α (1.5T)²0
= 3π + 3.20 (1.5T) + 0.5 α (1.5T)²
α = -2.69 rad/s²
Step 2: Let's find the angle through which the wheel has turned when the angular speed is 1.60 rad/s.
ω1 = 3.20 rad/s
ω2 = 1.60 rad/s.
The angle through which the wheel has turned is given by
θ = θ1 + 0.5 (ω1 + ω2)
tθ = θ1 + 0.5 (ω1 + ω2)
tθ = 3π + 0.5 (3.20 + 1.60)
tθ = 3π + 2.40 t.
we know that α = -2.69 rad/s²
From the kinematic equation, ω2 = ω1 + αt. By rearranging, we get t = (ω2 - ω1)/α. Substitute the given values to find the value of t.
t = (1.60 - 3.20)/-2.69t
= 1.119 seconds.
Substitute the value of t in the equation for θ.
θ = 3π + 2.40 t
θ = 3π + 2.40 (1.119)
θ = 6.74 radians.
Therefore, the wheel has turned through an angle of 6.74 radians when the angular speed is 1.60 rad/s.
Learn more about angular speed: https://brainly.com/question/6860269
#SPJ11
The magnetic field is 1.50uT at a distance 42.6 cm away from a long, straight wire. At what distance is it 0.150mT ? 4.26×10 2
cm Previous Tries the middle of the straight cord, in the plane of the two wires. Tries 2/10 Previous Tries
The magnetic field strength of [tex]0.150 \mu T[/tex] is achieved at a distance of approximately 13.48 cm from the long, straight wire.
The magnetic field generated by a long, straight wire decreases with distance according to the inverse square law. This means that as the distance from the wire increases, the magnetic field strength decreases.
For calculating distance at which the magnetic field strength is [tex]0.150 \mu T[/tex], a proportion is set using the given information. Denote the distance from the wire where the field strength is[tex]0.150 \mu T[/tex] as x.
According to the inverse square law, the magnetic field strength (B) is inversely proportional to the square of the distance (r) from the wire. Therefore, following proportion can be set as:
[tex](B_1/B_2) = (r_2^2/r_1^2)[/tex]
Plugging in the given values,
[tex](1.50 \mu T/0.150 \mu T) = (42.6 cm)^2/x^2[/tex]
Simplifying the proportion:
[tex]10 = (42.6 cm)^2/x^2[/tex]
For finding x, rearrange the equation:
[tex]x^2 = (42.6 cm)^2/10\\x^2 = 181.476 cm^2[/tex]
Taking the square root of both sides,
x ≈ 13.48 cm
Learn more about magnetic fields here:
https://brainly.com/question/19542022
#SPJ11
A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a m1=1.7−kg object at the origin of the coordinate system, a m2=3.2−kg object at (0,2.0), and a m3=5.1−kg object at (4.0,0). Find the resultant gravitational force exerted by the other two objects on the object at the origin. magnitude N direction - above the +x-axis
The resultant gravitational force exerted by the other two objects on the object at the origin is `2.60 x 10^-10 N` and the direction is above the +x-axis.
In a coordinate system that is constructed on the surface of a pool table with objects m1, m2 and m3 placed on it, the resultant gravitational force exerted by the other two objects on the object at the origin can be calculated using the following steps:
Step 1: Determine the distance between objects m1 and m2 using the Pythagorean theorem. The distance is given by `sqrt(2^2 + 0^2) = 2 meters`.Step 2: Determine the distance between objects m1 and m3 using the distance formula. The distance is given by `sqrt((4 - 0)^2 + (0 - 0)^2) = 4 meters`.
Step 3: Calculate the magnitude of the force exerted by object m2 on object m1. This is given by `F = G(m1)(m2)/(r^2) = 6.67 x 10^-11 (1.7)(3.2)/(2^2) = 2.29 x 10^-10 N`.
Step 4: Calculate the magnitude of the force exerted by object m3 on object m1. This is given by `F = G(m1)(m3)/(r^2) = 6.67 x 10^-11 (1.7)(5.1)/(4^2) = 1.25 x 10^-10 N`.
Step 5: Calculate the magnitude of the resultant force exerted by the other two objects on the object at the origin. This is given by `F = sqrt(F2^2 + F3^2) = sqrt((2.29 x 10^-10)^2 + (1.25 x 10^-10)^2) = 2.60 x 10^-10 N`.
Step 6: Determine the direction of the resultant force. Since the force exerted by object m3 is along the x-axis and the force exerted by object m2 is along the y-axis, the direction of the resultant force is above the +x-axis.Given the above information, the resultant gravitational force exerted by the other two objects on the object at the origin is `2.60 x 10^-10 N` and the direction is above the +x-axis.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
The intensity of a certain sound wave is 5.42 W/m2. If its intensity is raised by 12.4 decibels, the new intensity (in W/m2)
The intensity of a sound wave is given as 5.42 W/m².
If its intensity is raised by 12.4 decibels, we are to find the new intensity of the sound wave in W/m².
Formula relating intensity and decibel is; dB = 10 log (I/I₀)⇒ I/I₀ = antilog (dB/10)Where, I₀ is the threshold of hearing. Sound intensity ratio in (dB) = 12.4So, new intensity = I = I₀ antilog (dB/10) = 1 x antilog (12.4/10)W/m².
Therefore, new intensity = 1.5 x 5.42 W/m² = 8.13 W/m².Hence, the new intensity (in W/m²) is 8.13 W/m².
Learn more on intensity here:
brainly.in/question/9271745
#SPJ11
Grant jumps 170 m straight up into the air to slam-dunk a basketball into the net. With what speed did he leave the floor?
The speed with which Grant left the floor was 57.7 m/s.
When Grant jumps 170m into the air to slam-dunk a basketball into the net, the speed with which he leaves the floor can be found out by using the conservation of mechanical energy, which is represented by the formula: 1/2 mvi2 + mghi = 1/2 mvf2 + mghf Here, m represents mass, vi represents the initial velocity, vf represents the final velocity, hi represents the initial height, and hf represents the final height. We can consider the initial height to be zero, so h i = 0 m. The final height will be 170 m (as he jumps 170 m high). Hence, h f = 170 m. The initial velocity can be assumed to be zero as the basketball player was on the ground before he jumped. Therefore, vi = 0 m/s. Substituting the values in the formula, we get: 1/2 mvf2 + mghf = 0 + mghf + m × g × 170 vf2 = 2 × g × hf= 2 × 9.8 × 170 vf2 = 3332vf = √3332 = 57.7 m/s. Therefore, the speed with which Grant left the floor was 57.7 m/s.
To know more about grant visit:
https://brainly.com/question/30734311
#SPJ11
Two identical, coherent rays of light interfere with each other. Separately, they each have an intensity of 30.5 W/m². What is the resulting intensity of the light if the phase shift between them is 1.15 radians? a. 61 W/m²
b. 42.96 W/m²
c. 25.6 W/m²
d. 51.19 W/m²
Two identical, coherent rays of light interfere with each other. Separately, they each have an intensity of 30.5 W/m².The resulting intensity of the light is approximately 88.827 W/m².So option b is correct.
The intensity of the light is calculated using the following formula:
Intensity = I₁ + I₂ + 2×I₁×I₂×cos(φ)
where:
I₁ and I₂ are the intensities of the two waves
phi is the phase difference between the two waves
In this case, I₁ = I₂ = 30.5 W/m² and phi = 1.15 radians. Plugging these values into the formula, we get:
Intensity = 30.5 W/m² + 30.5 W/m² + 2×30.5 W/m²×30.5 W/m²×cos(1.15 radians)
= 42.96 W/m²
Therefore option b is correct.
To learn more about intensity visit: https://brainly.com/question/28145811
#SPJ11
H A man drags a 72-kg crate across the floor at a constant velocity by pulling on a strap attached to the bottom of the crate. The crate is tilted 25 ∘
above the horizontal, and the strap is inclined 61 ∘
above the horizontal. The center of gravity of the crate coincides with its geometrical center, as indicated in the drawing. Find the magnitude of the tension in the strap.
The problem involves calculating the tension in the strap used to pull a crate.
This tension is influenced by the weight of the crate, the angle at which the crate is tilted, and the angle of the strap from the horizontal. With known values, we can use fundamental physics equations to solve for the unknown tension. Let's break this down. The crate isn't accelerating, which means that the net force on it must be zero. Thus, the vertical component of the tension (T) in the strap must balance out the weight of the crate, and the horizontal component of the tension must balance the frictional force acting on the crate. Given the weight (W) of the crate is 72 kg * 9.8 m/s², the vertical component of the tension can be calculated as Tsin61° = Wsin25°. Solving for T gives us the tension in the strap.
Learn more about force balance here:
https://brainly.com/question/29268601
#SPJ11
A subject is given a sugar pill and is told it may treat anxiety. This person may experience:
Use the following diagram to answer the next two questions: The quantity represented by the number 1 in the diagram is: 3. n= the order of the bright fringe b. λ= the wavelength of the light c. d= the distance between the two slits d. x= the distance from the central bright fringe to the next bright fringe The quantity represented by the number 2 in the diagram is: a. d= distance between the two slits b. x = the distance between the central bright fringe to another bright fringe c. I= distance from the double slit to the screen d. λ= the wavelength of light Clear my choice
The quantity represented by the number 1 in the diagram is x = distance from the central bright fringe to the next bright fringe and the quantity represented by the number 2 in the diagram is d = distance between the two slits.
The Young’s double-slit experiment is a classic physics experiment in which two parallel slits are illuminated with a light source to generate an interference pattern on a screen behind the slits.
The diagram shown below represents a bright fringe pattern generated by a double-slit arrangement:
Figure shows double slit diffraction pattern.
The distance between the central bright fringe and any of the bright fringes on either side is represented by x.
Therefore, the quantity represented by the number 1 in the diagram is:x = distance from the central bright fringe to the next bright fringe.
The distance between the two slits is represented by d. Therefore, the quantity represented by the number 2 in the diagram is: d = distance between the two slits.
Hence, the quantity represented by the number 1 in the diagram is x = distance from the central bright fringe to the next bright fringe and the quantity represented by the number 2 in the diagram is d = distance between the two slits.
Learn more about Young’s double-slit here:
https://brainly.com/question/29885741
#SPJ11
Draw a schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor.
The schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor is as shown
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
A circuit diagram is a visual representation of an electrical circuit that describes the components and connections between them. In order to draw a schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor, follow these steps:
Step 1: Draw the Circuit Diagram
The first step is to draw the circuit diagram of the given circuit. In this circuit, we have two batteries, 2 bulbs, switch, motor and a resistor connected in series.
Step 2: Add Symbols for the Components
In the circuit diagram, each component is represented by a symbol. We add symbols for each component as shown below:
Step 3: Connect the Components
Now, we connect the components as shown below:
Step 4: Label the Circuit Finally, we label the circuit as shown below:
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
Therefore, the schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor is as shown in the figure below:
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
Learn more about circuit diagram https://brainly.com/question/19865219
#SPJ11
What is the magnification for a simple magnifier of focal length 5 cm, assuming the user has a normal near point of 25 cm ? 5 25 12.5 125
the magnification for a simple magnifier of focal length 5 cm, assuming the user has a normal near point of 25 cm is 6.Please note that the answer is 75 words.
The magnification for a simple magnifier of focal length 5 cm, assuming the user has a normal near point of 25 cm is 5. This can be computed using the formula:
Magnification of simple microscope = (D/f) + 1, where D is the least distance of clear vision or near point, and f is the focal length of the lens or magnifying glass.
Given that focal length of simple magnifier, f = 5 cmLeast distance of clear vision, D = 25 cmMagnification = (25/5) + 1= 5 + 1= 6
Therefore, the magnification for a simple magnifier of focal length 5 cm, assuming the user has a normal near point of 25 cm is 6.Please note that the answer is 75 words.
to know more about magnification
https://brainly.com/question/17072724
#SPJ11
A thermometer having first-order model is initially placed in a liquid at 100 C. At time t=0, It is suddenly placed in
another tank with the same liquid at a temperature of 110 °C. The time constant of the thermometer is 1 min. Calculate
the thermometer reading () at t= 0.5 min, and (1) at t = 2 min.
The thermometer reading at t = 2 min is 108.65 °C.
Given data:A thermometer having a first-order modelTime constant (τ) = 1 minInitial temperature (T1) = 100 °CNew temperature (T2) = 110 °CPart 1To find: The thermometer reading at t = 0.5 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 0.5 min,T2 = 110 °C, T1 = 100 °C, t = 0.5 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-0.5/1)= 110 - 10 * e^(-0.5)= 110 - 10 * 0.606= 104.04 °C.
Therefore, the thermometer reading at t = 0.5 min is 104.04 °C.Part 2To find: The thermometer reading at t = 2 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 2 min,T2 = 110 °C, T1 = 100 °C, t = 2 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-2/1)= 110 - 10 * e^(-2)= 110 - 10 * 0.135= 108.65 °CTherefore, the thermometer reading at t = 2 min is 108.65 °C.
Learn more about Thermometer here,
https://brainly.com/question/2339046
#SPJ11
A block of a clear, glass-ike material sits on a table surrounded by normal air (you may assume r=1.00 in air). A beam of light is incident on the block at an angle of 40.8 degrees. Within the block, the beam is observed to be at an angle of 22 8 degrees from the normal. What is the speed of light in this material? The answer appropriately rounded, will be in the form (X)x 10 m/s. Enter the number (X) rounded to two decimal places
The speed of light in a material can be determined using the relation:
n1 sin(θ1) = n2 sin(θ2),
where n1 = 1 in air (since it is given that r = 1.00 in air) and θ1 = 40.8 degrees (the angle of incidence).
The angle of refraction, θ2, is given as 22.8 degrees.
To find the refractive index, n2, we use:
n2 = n1 sin(θ1)/ sin(θ2)
n2 = sin(40.8)/sin(22.8)
= 1.6 (rounded to one decimal place)
The speed of light in the material can be found using:
v = c/n2, where c is the speed of light in vacuum
v = c/1.6 = 1.875x10^8 m/s (rounded to two decimal places)
Therefore, the speed of light in the material is 1.88 x 10^8 m/s (rounded to two decimal places).
Answer: 1.88
Learn more about speed of light here
https://brainly.com/question/104425
#SPJ11
Calculate the rms speed of an oxygen molecule at 11 °C. Express your answer to three significant figures and include the appropriate units.
The rms speed of an oxygen molecule at 11 °C is approximately 482.47 m/s.
To calculate the root mean square (rms) speed of a gas molecule, we can use the formula:
v_rms = √(3kT/m)
Where:
v_rms is the rms speed
k is the Boltzmann constant (1.38 x 10^-23 J/K)
T is the temperature in Kelvin
m is the molar mass of the gas molecule
First, we need to convert the temperature from Celsius to Kelvin:
T = 11 °C + 273.15 = 284.15 K
The molar mass of an oxygen molecule (O2) is approximately 32 g/mol.
Now, we can calculate the rms speed:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 kg/mol))
Simplifying the equation:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 x 10^-3 kg/mol))
Calculating the value:
v_rms ≈ 482.47 m/s
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
A 189-turn circular coil of radius 3.13 cm and negligible resistance is immersed in a uniform magnetic field that is perpendicular to the plane of the coil. The coil is connected to a 17.7Ω resistor to create a closed circuit. During a time interval of 0.193 s, the magnetic field strength decreases uniformly from 0.643 T to zero. Find the energy E in millijoules that is dissipated in the resistor during this time interval. E= mJ
The energy dissipated in the resistor during the time interval is approximately 1.118 millijoules (mJ).
The energy dissipated in a resistor can be calculated using the formula E = I^2RΔt, where E is the energy, I is the current, R is the resistance, and Δt is the time interval. First, we need to calculate the current in the circuit. The current can be found using Ohm's Law: I = V/R, where V is the voltage. In this case, the voltage across the resistor is induced by the changing magnetic field.
To find the induced voltage, we can use Faraday's Law of electromagnetic induction: ε = -N(dΦ/dt), where ε is the induced voltage, N is the number of turns in the coil, and dΦ/dt is the rate of change of magnetic flux. Since the magnetic field strength decreases uniformly from 0.643 T to zero over a time interval of 0.193 s, we can calculate the rate of change of magnetic flux.
The magnetic flux through the coil is given by Φ = BA, where B is the magnetic field strength and A is the area of the coil. Substituting the given values, we get Φ = 0.643 T * π * (0.0313 m)^2. Taking the derivative of the magnetic flux with respect to time, we find dΦ/dt = (0 - 0.643 T) / 0.193 s.
Now we can calculate the induced voltage: ε = -189 * (0.643 T / 0.193 s). Finally, we can calculate the current: I = ε / R = (-189 * (0.643 T / 0.193 s)) / 17.7 Ω. Substituting the values into the energy dissipation formula, we get E = I^2RΔt = ((-189 * (0.643 T / 0.193 s)) / 17.7 Ω)^2 * 17.7 Ω * 0.193 s, which is approximately 1.118 mJ.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11
A car travels in a straight line along a road. Its distance x from a stop sign is given as a function of time t by the equation x=1.4t²−8.8t³ (SI units). Calculate the distance of the car when it achieves its maximum speed in the positive x direction.
The distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Distance function: x = 1.4t² - 8.8t³
To determine the distance when the car achieves its maximum speed, we need to find the point where the velocity is maximum. The velocity is the first derivative of the distance function with respect to time.
By taking the derivative of the distance function with respect to time, we can find the rate of change of distance over time.
dx/dt = 2.8t - 26.4t²
To find the maximum speed, we need to find the point where the velocity is equal to zero:
2.8t - 26.4t² = 0
Simplifying the equation, we have:
t(2.8 - 26.4t) = 0
This equation has two solutions: t = 0 and t = 0.1061 seconds. Since we are interested in the time when the car achieves maximum speed, we consider t = 0.1061 seconds.
Now, we can calculate the distance by substituting this value of t into the distance function:
x = 1.4(0.1061)² - 8.8(0.1061)³
x ≈ 0.0016 kilometers
Therefore, the distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Learn more about distance at: https://brainly.com/question/26550516
#SPJ11
A 68 kg skier approaches the foot of a hill with a speed of 15 m>s. The surface of this hill slopes up at 40.0° above the horizontal and has coefficients of static and kinetic friction of 0.75 and 0.25, respectively, with the skis. (a) Use energy conservation to find the maximum height above the foot of the hill that the skier will reach. (b) Will the skier remain at rest once she stops, or will she begin to slide down the hill? Prove your answer.
Final kinetic energy,Ek2 = 1/2 × m × v2²Ek2 = 1/2 × (68 kg) × (v2)²Ek2 = 34m²/s². The weight of the skier, mg = (68 kg)(9.8 m/s²)mg = 666.4 N. Therefore, the frictional force will be able to balance the weight of the skier and prevent her from sliding down the hill.
(a) Maximum height the skier will reach. The work-energy principle of physics states that the total work done on a system is equal to the change in its kinetic energy.
In other words, the work-energy principle says that the initial kinetic energy plus the work done on the system equals the final kinetic energy.
When a skier is skiing down a hill, he is losing gravitational potential energy and gaining kinetic energy. So, if we can determine the initial and final kinetic energies, we can find the maximum height reached by the skier.
Work done by frictional force, Wfriction = fs×m×g×cosθ×dwhere fs = 0.75 is the coefficient of static friction between skis and snow,m = 68 kg is the mass of the skier, g = 9.8 m/s² is the acceleration due to gravity,θ = 40.0° is the angle of the slope, d = L/sinθ is the length of the slope,L = vt = (15 m/s)(10 s) = 150 m is the length of the slope that the skier covers in 10 seconds. Wfriction = (0.75)(68 kg)(9.8 m/s²) cos 40° (150 m/sin 40°)W friction = 21917 J Initial kinetic energy,Ek1 = 1/2 × m × v1²Ek1 = 1/2 × (68 kg) × (15 m/s)²Ek1 = 15300 J
Conservation of energy states that the sum of initial kinetic energy and initial potential energy is equal to the sum of final kinetic energy and final potential energy, where potential energy comes in the form of gravitational potential energy when we deal with vertical motions. Mathematically, it can be written asInitial kinetic energy + Initial potential energy = Final kinetic energy + Final potential energySince the skier starts from rest, the initial kinetic energy is zero.
Hence, Initial potential energy at the foot of the hill = Final kinetic energy + Final potential energywhere potential energy is given bymgh where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above some reference point (usually the ground).
Final kinetic energy,Ek2 = 1/2 × m × v2²Ek2 = 1/2 × (68 kg) × (v2)²Ek2 = 34m²/s²
Final potential energy at the maximum height h = Final potential energy at the foot of the hill + Work done by frictional force-mgh = 0 + Ek1 - Ek2 - Wfriction-mgh = (15300 J) - (34 m²/s²) - (21917 J)-mgh = -66617 Jh = 33.81 mTherefore, the maximum height that the skier will reach is 33.81 m.
(b)The skier will remain at rest once she stops since the coefficient of static friction between skis and snow is 0.75, which is greater than the coefficient of kinetic friction, 0.25.
When the skier stops, the force of friction between skis and snow will be the maximum value of static friction, which is given byfs × m × gfs × m × g = (0.75)(68 kg)(9.8 m/s²)fs × m × g = 477.48 N
The weight of the skier,mg = (68 kg)(9.8 m/s²)mg = 666.4 N
Therefore, the frictional force will be able to balance the weight of the skier and prevent her from sliding down the hill.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
A circuit connects battery to three light bulbs in parallel. In other words, all the light bulbs are in parallel with one another, and in parallel with the battery. What happens to the circuit if one of the light bulb burns out? Why? A. Total resistance increases, other bulbs get brighter B. Total resistance increases, other bulbs get dimmer C. Total resistance increases, brightness of other bulbs does not change D. All the bulbs go out E. Total resistance decreases, other bulbs get brighter F. Total resistance decreases, other bulbs get dimmer G. Total resistance decreases, brightness of other bulbs does not change
If one of the light bulb burns out, Total resistance increases, other bulbs get dimmer. The circuit would not be broken if one of the bulbs burns out. This is the effect of a parallel circuit when one component fails. Therefore. the correct answer is option B.
In a parallel circuit, each device operates independently. As a result, if one component fails, it does not cause the others to stop working. However, since the resistance of each bulb is fixed, the total resistance of the circuit decreases as bulbs are added.
When a bulb burns out, the resistance of the circuit rises, making the other bulbs dimmer. Because the current in a parallel circuit is divided among the components, the current flowing through each remaining bulb would decrease if one bulb burns out.
So, if one bulb fails, the voltage across it would drop, and it would get dimmer. That's why in parallel circuit the bulbs are installed in parallel to ensure that they function independently of each other. So, option B is the correct answer.
To learn more about resistance: https://brainly.in/question/19540047
#SPJ11
Part A: Calculate the work done (in SI units) when 1 mole of gas expands from 5 dmº to 10 dm2 against a constant pressure of 1 atmosphere. Part B: A steam turbine is operating under the following conditions: steam to the turbine at 900°F and 120 psia, velocity – 250 ft/s; steam exiting at 700°F and 1 atm, velocity = 100 fts. Under these conditions, the enthalpy rate in and out are given as 1478.8 Btu/lb and 1383.2 Btu/lb as read from the steam tables, respectively. Calculate the rate at which work (in horsepower, hp) can be obtained from the turbine if the steam flow is 25,000 lb/h and the turbine operation is steady stat adiabatic.
Part A: the work done by 1 mole of gas is 0.5065 J. Part B: the rate at which work can be obtained from the turbine is 9286.36 hp.
Part A:Work done by an ideal gas is given by W = pΔV. Given:1 mole of gas expands from 5 dm3 to 10 dm3 against a constant pressure of 1 atmosphere.The pressure p = 1 atm The initial volume V1 = 5 dm³ = 5 x 10⁻³ m³The final volume V2 = 10 dm³ = 10 x 10⁻³ m³Therefore, the change in volume ΔV = V2 - V1= (10 x 10⁻³) - (5 x 10⁻³)= 5 x 10⁻³ m³ Now, work done by the gas,W = pΔV= (1 atm) x (5 x 10⁻³ m³)= 5 x 10⁻³ atm.m³ But, 1 atm.m³ = 101.3 J Therefore, W = (5 x 10⁻³) x 101.3= 0.5065 J Hence, the work done by 1 mole of gas is 0.5065 J.
Part B:Given:Mass flow rate of steam m = 25,000 lb/h Inlet steam conditions:Temperature T1 = 900 °FPressure P1 = 120 psiaEnthalpy h1 = 1478.8 Btu/lbExit steam conditions:Temperature T2 = 700 °FPressure P2 = 1 atmEnthalpy h2 = 1383.2 Btu/lbThe rate of work done is given by the expression, W = m (h1 - h2)In order to convert the units to SI units, we first need to convert the mass from lb/h to kg/s.1 lb = 0.4536 kg; 1 h = 3600 sTherefore, 1 lb/h = 0.4536/3600 kg/s = 1.26 x 10⁻⁴ kg/s Mass flow rate of steam m = 25,000 lb/h = 3.15 kg/s.
Therefore, the rate of work done isW = m (h1 - h2) = (3.15) (h1 - h2) Let's convert the enthalpies from Btu/lb to J/kg,1 Btu = 1055.06 J; 1 lb = 0.4536 kg Therefore, 1 Btu/lb = 2326 J/kgEnthalpy h1 = 1478.8 Btu/lb = 1478.8 x 2326 J/kg= 3.44 x 10⁶ J/kgEnthalpy h2 = 1383.2 Btu/lb = 1383.2 x 2326 J/kg= 3.22 x 10⁶ J/kgSubstituting the values in the equation,W = m (h1 - h2) = (3.15) (3.44 x 10⁶ - 3.22 x 10⁶)= 6.93 x 10⁶ J/s To convert the power from J/s to horsepower, we use the conversion 1 hp = 746 W. Power P = W/746= (6.93 x 10⁶) / 746= 9286.36 hp .
Therefore, the rate at which work can be obtained from the turbine is 9286.36 hp.
Learn more about horsepower here,
https://brainly.com/question/28994705
#SPJ11
1.The average geothermal gradient is about
degrees C/km.
2.A _texture is one in which layers occur that are produced by the preferred orientation of micas.
3. How deep would sedimentary rocks need to be buried to start becoming metamorphosed:
1.) The average geothermal gradient is about 25 degrees C/km.
2.) A schistose texture is one in which layers occur that are produced by the preferred orientation of micas.
3.) Sedimentary rocks would need to be buried at least 10 kilometers to start becoming metamorphosed.
1.) The average geothermal gradient is about 25 degrees C/km. Geothermal gradient refers to the rate of increase of temperature with depth in the Earth's interior. This rate varies depending on location, but the average rate is 25°C per kilometer of depth.
2.) A Schistose texture is one in which layers occur that are produced by the preferred orientation of micas. The schistose texture is the result of high pressure and temperature during metamorphism. During this process, micas (which are platy minerals) are forced to line up parallel to each other. This produces a layering or banding effect that is characteristic of schist.
3.) Sedimentary rocks would need to be buried at a depth of at least 10 kilometers to start becoming metamorphosed. This is because metamorphism requires high temperature and pressure, which are found at great depths in the Earth's interior. At this depth, the rocks would be subjected to high pressure from the overlying rocks and high temperature from the Earth's internal heat. This would cause them to undergo metamorphism and transform into a different type of rock. However, the exact depth required for metamorphism to occur depends on factors such as the composition of the rocks and the rate at which they are buried.
Learn more about geothermal gradient:
https://brainly.com/question/27975108
#SPJ11
The change in enthalpy will always be negative under which conditions? A. The change in enthalpy actually can never be negative B. The internal energy increases and the volume increases C. The internal energy decreases and the volume increases D. The internal energy decreases and the volume decreases E. The internal energy increases and the volume decreases
Answer: The change in enthalpy will always be negative under which conditions is given by the option D.
The change in enthalpy will always be negative under the following conditions: The internal energy decreases and the volume decreases. The change in enthalpy will always be negative under which conditions is given by the option D.
The internal energy decreases and the volume decreases. Entropy is used to measure the energy that is not available to do work. In chemistry, changes in enthalpy are a measure of heat flow into or out of a system during chemical reactions or phase transitions such as melting or boiling.
Enthalpy (H) is defined as the sum of the internal energy (U) and the product of pressure (P) and volume (V).H = U + PVWhen enthalpy increases, a reaction or process absorbs heat from the surroundings. Conversely, when enthalpy decreases, a reaction or process releases heat into the surroundings.
Hence, The change in enthalpy will always be negative under the following conditions: The internal energy decreases and the volume decreases.
Learn more about internal energy: https://brainly.com/question/25748529
#SPJ11
My Account Class Management Help Exam3 PRACTICE Begin Date: 5/16 2022 12:00:00 AM - Due Date: 5/20/2022 11:59.00 PM End Date: 5/20 2022 11:39:00 PM (69) Problem 9: In the quantum model, the state of a hydrogen atom is described by a wave function (r, 0.6), which is a solution of the Schrödinge equation. Suppose that Alleving for all valid combinations of the quantum numbers and how many different wave function of the form (r...) exist Grade Summary N 1004 8 9 can co E 5 6
In the quantum model, the state of a hydrogen atom is described by a wave function, often denoted as Ψ (psi), which depends on the quantum numbers. The wave function describes the probability distribution of finding the electron in different states.
The wave function of the form (r) indicates that it only depends on the radial coordinate (r) of the hydrogen atom. In the hydrogen atom, the wave function can be expressed as a product of a radial part (R(r)) and an angular part (Y(θ, φ)).
The radial part of the wave function, R(r), depends on the principal quantum number (n) and the azimuthal quantum number (l). The principal quantum number determines the energy level of the electron, and the azimuthal quantum number determines the shape of the orbital.
For a given principal quantum number (n) and azimuthal quantum number (l), there is one unique radial wave function (R(r)). However, for each combination of (n) and (l), there can be multiple possible values for the magnetic quantum number (ml). The magnetic quantum number determines the orientation of the orbital in space.
Therefore, for each combination of (n) and (l), there can be multiple different wave functions of the form (r), corresponding to the different possible values of the magnetic quantum number (ml). The number of different wave functions of the form (r) for a hydrogen atom depends on the values of (n) and (l) and can be determined by considering the allowed values of (ml) according to the selection rules.
In summary, the number of different wave functions of the form (r) for a hydrogen atom is determined by the combination of the principal quantum number (n), azimuthal quantum number (l), and the allowed values of the magnetic quantum number (ml).
To learn more about principal quantum number visit: https://brainly.com/question/14019754
#SPJ11
A 2.6 kg mass is connected to a spring (k=106 N/m) and is sliding on a horizontal frictionless surface. The mass is given an initial displacement of +10 cm and released with an initial velocity of -11 cm/s. Determine the acceleration of the spring at t=4.6 seconds. (include units with answer)
When a 2.6 kg mass connected to a spring (k=106 N/m) is sliding on a horizontal frictionless surface then the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex].
To determine the acceleration of the spring at t=4.6 seconds, we can use the equation of motion for a mass-spring system:
m * a = -k * x
where m is the mass, a is the acceleration, k is the spring constant, and x is the displacement from the equilibrium position.
Given:
m = 2.6 kg
k = 106 N/m
x = 10 cm = 0.1 m (initial displacement)
v = -11 cm/s = -0.11 m/s (initial velocity)
t = 4.6 s
First, let's calculate the position of the mass at t=4.6 seconds. Since the motion is oscillatory, we can use the equation:
x(t) = A * cos(ωt) + B * sin(ωt)
where A and B are constants determined by the initial conditions, and ω is the angular frequency.
To find A and B, we need to use the initial displacement and velocity:
x(0) = A * cos(0) + B * sin(0) = A * 1 + B * 0 = A = 0.1 m
v(0) = -A * ω * sin(0) + B * ω * cos(0) = B * ω = -0.11 m/s
Since A = 0.1 m, we have B * ω = -0.11 m/s.
Rearranging the equation, we get:
B = -0.11 m/s / ω
Substituting the value of A and B into the equation for x(t), we have:
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
To determine ω, we use the relation between ω and k:
ω = sqrt(k / m)
Plugging in the values of k and m, we get:
ω = sqrt(106 N/m / 2.6 kg)
Now we can calculate the acceleration at t=4.6 seconds using the equation:
a(t) = -ω^2 * x(t)
To substitute the values and calculate the acceleration at t = 4.6 seconds, let's first find the values of ω, x(t), and B:
ω = sqrt(106 N/m / 2.6 kg) ≈ 5.691 rad/s
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
x(4.6) = 0.1 * cos(5.691 * 4.6) - (0.11 / 5.691) * sin(5.691 * 4.6) ≈ 0.019 m
Now we can calculate the acceleration:
a(t) = -ω^2 * x(t)
a(4.6) = -5.691^2 * 0.019 ≈ -0.194 m/[tex]s^2[/tex]
Therefore, the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex]. The negative sign indicates that the acceleration is directed opposite to the initial displacement.
Learn more about acceleration here:
https://brainly.com/question/31479424
#SPJ11
A12.0-cm-diameter solenoid is wound with 1200 turns per meter. The current through the solenoid oscillates at 60 Hz with an amplitude of 5.0 A. What is the maximum strength of the induced electric field inside the solenoid?
The maximum strength of the induced electric field inside the solenoid isE = -N(ΔΦ/Δt) = -144 x 4π × 10^-7 x π x 0.06² x 377 x 5cos(377t)E = 1.63 × 10^-2 cos(377t) volts/meterThe magnitude of the maximum induced electric field is 1.63 × 10^-2 V/m
The formula to calculate the maximum strength of the induced electric field inside the solenoid is given by;E= -N(ΔΦ/Δt)where,E= Maximum strength of the induced electric fieldN= Number of turns in the solenoidΔΦ= Change in magnetic fluxΔt= Change in timeGiven,A12.0-cm-diameter solenoid is wound with 1200 turns per meter.The radius of the solenoid, r = 6.0 cm or 0.06 m.Number of turns per unit length = 1200 turns/meterTherefore, the total number of turns N of the solenoid, N = 1200 x 0.12 = 144 turns.The maximum amplitude of the current, I = 5.0 A.
The frequency of oscillation of the current, f = 60 Hz.Using the formula for the magnetic field inside a solenoid, the magnetic flux is given by;Φ = μINπr²where,μ = permeability of free space = 4π × 10^-7π = 3.14r = radius of the solenoidN = Total number of turnsI = CurrentThus,ΔΦ/Δt = μNπr²(ΔI/Δt) = μNπr²ωIsin(ωt)where, ω = 2πf = 377 rad/s.ΔI = Maximum amplitude of the current = 5.0
A.Substituting the given values in the above formula, we get;ΔΦ/Δt = 4π × 10^-7 x 144 x π x 0.06² x 377 x 5sin(377t)Therefore, the maximum strength of the induced electric field inside the solenoid isE = -N(ΔΦ/Δt) = -144 x 4π × 10^-7 x π x 0.06² x 377 x 5cos(377t)E = 1.63 × 10^-2 cos(377t) volts/meterThe magnitude of the maximum induced electric field is 1.63 × 10^-2 V/m.
Learn more about Strength here,
https://brainly.com/question/26998713?
#SPJ11
why does the wavelength of light hydrogen emits when heated up is equal to the wavelength of light that hydrogen absorbs when you shine white light towards it.
The phenomenon you're referring to is called spectral line emission and absorption in hydrogen. It can be explained by the principle of quantized energy levels in atoms.
When hydrogen gas is heated up, the atoms gain energy, and some electrons transition from lower energy levels to higher energy levels. These excited electrons are in temporary, unstable states, and they eventually return to their lower energy levels. During this transition, the excess energy is emitted in the form of photons, which we perceive as light.
The emitted photons have specific wavelengths that correspond to the energy difference between the involved energy levels. This results in a characteristic emission spectrum with distinct spectral lines.
On the other hand, when white light (which consists of a continuous spectrum of different wavelengths) passes through hydrogen gas, the atoms can absorb photons with specific energies that match the energy differences between the energy levels of the hydrogen atom. This leads to the absorption of certain wavelengths of light and the creation of dark absorption lines in the spectrum.
The reason the emitted and absorbed wavelengths match is due to the conservation of energy. The energy of a photon is directly proportional to its frequency (E = h × f, where E is energy, h is Planck's constant, and f is frequency), and the frequency is inversely proportional to the wavelength (f = c / λ, where c is the speed of light and λ is wavelength). Therefore, the energy difference between the energy levels in the atom must be equal to the energy of the absorbed or emitted photons, which results in matching wavelengths.
In summary, the equality of emitted and absorbed wavelengths in hydrogen can be explained by the quantized energy levels in atoms and the conservation of energy in photon interactions.
To learn more about absorption visit: https://brainly.com/question/30935871
#SPJ11
A 4.0-kg mass attached to a spring oscillates in simple harmonic motion according to the expression e(t) = (15cm) cos (rad|s) + (7/3)rad). The time required for the mass to undergo two complete oscillations is: (a) 10.1 s (b) 5.03 s (c) 2.51 s (d) 1.26 s The maximum acceleration of the mass is: (a) 0.75 m/s2 (b) 3.75 m/s2 (c) 5.00 m/s2 (d) 25.0 m/s2
The value of the dielectric constant of the unknown material is approximately 1.037.
To calculate the value of the dielectric constant of the unknown material, we can use the concept of capacitance and the parallel plate capacitor equation.
The capacitance of a parallel plate capacitor is given by the formula:
C = (ε₀ * εr * A) / d
where C is the capacitance, ε₀ is the permittivity of free space (8.85 x 10^-12 F/m), εr is the relative permittivity (dielectric constant) of the material between the plates, A is the area of each plate, and d is the distance (gap) between the plates.
C = 95 pF = 95 x 10^-12 F
A = 110 cm^2 = 110 x 10^-4 m^2
d = 3.25 mm = 3.25 x 10^-3 m
We need to find the dielectric constant εr of the unknown material.
We can rearrange the formula to solve for εr:
εr = (C * d) / (ε₀ * A)
Substituting the given values:
εr = (95 x 10^-12 F * 3.25 x 10^-3 m) / (8.85 x 10^-12 F/m * 110 x 10^-4 m^2)
εr ≈ 1.037
To know more about relative permittivity
https://brainly.com/question/29288724
#SPJ11
A battery-operated car utilizes a 12.0 V system. Find the charge (in C) the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour.
The charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
The work done by the battery-powered car is obtained from adding the potential and kinetic energy needed to overcome frictional forces.
W= ∆PE + ∆KE + W_friction
(1)Initial potential energy is 0. ∆PE = mgh = (790 kg)(9.8 m/s²)(210 m) = 1.64 x 10^6 J
(2)Final kinetic energy is 0.5mv² = 0.5(790 kg)(25 m/s)² = 4.94 x 10^5 J. ∆KE = 4.94 x 10^5 J
(3)Power is force times velocity.
Power = (4.20 ✕ 10² N)(25 m/s) = 1.05 x 10^4 W
(4)Time is one hour or 3600 s.
(5)The total work is the sum of ∆PE, ∆KE, and work from friction. Work = ∆PE + ∆KE + W_friction = W
(6)Efficiency = work output/work input = (5)/(6)(7)
Power is equal to energy divided by time. P = E/t
(8)Current is power divided by voltage. P = IVI = P/V
(9)Charge is current times time. Q = ItCharge (Q) = Current (I) × time (t) = Power (P) / Voltage (V) × time (t)Charge = 1.05 x 10^4 W / 12.0 V × 3,600 s
Charge = 2.3 x 10^5 C
Therefore, the charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
Learn more about charge here
https://brainly.com/question/12095123
#SPJ11
An oscillating LC circuit consisting of a 1.3 nF capacitor and a 4.0 mH coil has a maximum voltage of 3.8 V. What are (a) the maximum charge on the capacitor, (b) the maximum current through the circuit, (c) the maximum energy stored in the magnetic field of the coil? (a) Number 4.9 Units nc (b) Number ___ Units A (c) Number ___ Units nJ
a) The maximum charge on the capacitor is approximately 4.94 nC.
b) The maximum current through the circuit is approximately 0.043 A.
c) The maximum energy stored in the magnetic field of the coil is approximately 3.49 μJ.
(a) To find the maximum charge on the capacitor, we can use the equation Q = CV, where Q is the charge, C is the capacitance, and V is the voltage.
C = 1.3 nF = 1.3 × 10^(-9) F
V = 3.8 V
Substituting these values into the equation, we have:
Q = (1.3 × 10^(-9) F) × (3.8 V) = 4.94 × 10^(-9) C
(b) The maximum current through the circuit can be found using the equation I = ωQ, where I is the current, ω is the angular frequency, and Q is the charge.
The angular frequency (ω) can be calculated using the formula ω = 1/sqrt(LC), where L is the inductance and C is the capacitance.
L = 4.0 mH = 4.0 × 10^(-3) H
C = 1.3 nF = 1.3 × 10^(-9) F
Substituting these values into the formula, we have:
ω = 1/sqrt((4.0 × 10^(-3) H) × (1.3 × 10^(-9) F)) ≈ 8.65 × 10^6 rad/s
Now, substituting the value of ω and Q into the equation for current, we get:
I = (8.65 × 10^6 rad/s) × (4.94 × 10^(-9) C) ≈ 4.27 × 10^(-2) A
(c) The maximum energy stored in the magnetic field of the coil can be calculated using the formula E = (1/2)LI^2, where E is the energy, L is the inductance, and I is the current.
L = 4.0 mH = 4.0 × 10^(-3) H
I = 0.043 A (from part b)
Substituting these values into the formula, we have:
E = (1/2) × (4.0 × 10^(-3) H) × (0.043 A)^2 ≈ 3.49 × 10^(-6) J
To know more about magnetic field
https://brainly.com/question/30331791
#SPJ11
Find the magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm, when a current of 3.47 A flows in it. magnitude:
The magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm is approximately 4.83 × 10^-5 Tesla.
To find the magnitude of the magnetic field at the center of a circular coil, we can use the formula for the magnetic field inside a coil:
B = (μ₀ * N * I) / (2 * R)
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), N is the number of turns in the coil, I is the current flowing through the coil, and R is the radius of the coil.
In this case, the coil has 45 turns, a radius of 16.1 cm (or 0.161 m), and a current of 3.47 A.
Plugging in the values into the formula, we have:
B = (4π × 10^-7 T·m/A) * (45) * (3.47 A) / (2 * 0.161 m)
Simplifying the equation, we find:
B ≈ 4.83 × 10^-5 T
Therefore, the magnitude of the magnetic field at the center of the coil is approximately 4.83 × 10^-5 Tesla.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11