write the method colsum which accepts a 2d array and the column number // and returns its total column sum

To find the smallest value of n that satisfies the condition, we need to set up an equation and solve for n.

The equation would be:

100n^2 < 2^n

To solve this, we can take the logarithm of both sides (with any base):

log(100n^2) < log(2^n)

Using the logarithmic properties, we can simplify this to:

2 + log(n) < n*log(2)

Now, we can use trial and error or a graphing calculator to find the smallest value of n that satisfies this inequality.

Through trial and error, we can start with n = 10 and plug it into the equation. We get:

2 + log(10) < 10*log(2)
2 + 1 < 6.64

This is true, so n = 10 is a valid solution.

We can try n = 9 next:

2 + log(9) < 9*log(2)
2 + 0.95 < 5.57

This is also true, so n = 9 is a valid solution.

We can keep trying smaller values of n until we find the smallest one that satisfies the inequality.

Alternatively, we can graph both sides of the inequality and find the intersection point:

y = 100n^2 and y = 2^n

The graph of y = 100n^2 is a parabola that opens upwards, while the graph of y = 2^n is an exponential function that grows much faster.

By looking at the graph, we can see that the intersection point is around n = 8.5. Therefore, the smallest value of n that satisfies the condition is n = 9.

In other words, if the running time of an algorithm is 100n^2, it will run faster than an algorithm whose running time is 2^n for n >= 9 on the same machine.

#SPJ11

Here,  an entity Song with only two attributes Title and Composer and primary key Title, Composer, the correct way to represent it as a functional dependency in order to design tables using minimal covers would be: c. Title, Composer -> Title, Composer

This functional dependency indicates that the combination of Title and Composer attributes uniquely determines itself, which is consistent with them being the primary key of the Song entity.This means that the combination of the attributes Title and Composer functionally determines both Title and Composer. This is the minimal cover because no other functional dependencies can be derived from it.

Learn more about entity song here, https://brainly.com/question/16662087

#SPJ11

The function called allocate3(int* &p1, int* &p2, int* &p3) should dynamically allocate space for three integers initialized to 0, while also deleting any previously allocated memory if necessary. Additionally, the function should have a strong exception guarantee and throw a badalloc exception if any of the allocations fail.

An answer would involve writing out the code for the function. One possible implementation could be:

void allocate3(int* &p1, int* &p2, int* &p3) {
 try {
   int* temp1 = new int(0);
   int* temp2 = new int(0);
   int* temp3 = new int(0);

   if (p1 != nullptr) {
     delete p1;
   }
   if (p2 != nullptr) {
     delete p2;
   }
   if (p3 != nullptr) {
     delete p3;
   }

   p1 = temp1;
   p2 = temp2;
   p3 = temp3;
 } catch (std::bad_alloc& e) {
   if (p1 != nullptr) {
     delete p1;
     p1 = nullptr;
   }
   if (p2 != nullptr) {
     delete p2;
     p2 = nullptr;
   }
   if (p3 != nullptr) {
     delete p3;
     p3 = nullptr;
   }
   throw e;
 }
}

This function uses the new operator to allocate space for three integers initialized to 0, and then deletes any previously allocated memory if necessary. If any of the allocations fail, a badalloc exception is thrown after deallocating any previously allocated memory. This ensures that the function has a strong exception guarantee.

Learn more about allocated memory: https://brainly.com/question/30055246

#SPJ11

The advantages of adopting development tools include boosted output, better-written code, and improved teamwork. Cons include a learning curve, possible expense, and the possibility of relying too heavily on automation.

Increased production rates and productivity, greater product quality, improved safety, shorter worker workweeks, and shorter lead times in factories are all benefits that are frequently attributed to automation.

Theoretically, AI could eventually replace human workers, but the MIT CCI research indicates that we are still a long way from it being on par with human intelligence. If there is investment in AI, not less jobs will be created.

To know more about output visit:

https://brainly.com/question/18133242

#SPJ1

Here is a guideline on how you can proceed with the above prompt on TextBlob.

Exercise 12.1 requires creating a TextBlob object from a given text and tokenizing it into sentences and words. The noun phrases can be extracted using the noun_phrases attribute of the TextBlob object.

Exercise 12.3 involves downloading a news article, creating a TextBlob, and displaying the sentiment for the entire TextBlob and for each sentence using the sentiment attributes of the TextBlob and Sentence objects.

Exercise 12.7 requires downloading three news articles on the same topic from different news sites and performing readability assessments using Textatistic. The average number of words per sentence, the average number of characters per word, and the average number of syllables per word should be calculated for each article and printed to the console.

For the 12.7.1 task, a word cloud should be created for each of the three articles using the heart mask attached to Chapter 12 examples or any other mask. The similarities and differences between the word clouds should be reflected upon in a few sentences or a code comment.

Learn more about TextBlob at:

https://brainly.com/question/29771314

#SPJ1

C. An up counter's output increases by one with each input clock pulse whereas a down counter's output decreases by one with each input clock pulse.

In a normal count sequence, 000 is followed by 001 in an up-counter and by 111 in a down counter, but this is not the primary difference between the two types of counters.An ‘N’ bit binary counter consists of ‘N’ T flip-flops. If the counter counts from 0 to 2 − 1, then it is called as binary up counter. Similarly, if the counter counts down from 2 − 1 to 0, then it is called as binary down counter.

There are two types of counters based on the flip-flops that are connected in synchronous or not.

Synchronous counters

Asynchronous Counters

If the flip-flops do not receive the same clock signal, then that counter is called as Asynchronous counter. The output of system clock is applied as clock signal only to first flip-flop. The remaining flip-flops receive the clock signal from output of its previous stage flip-flop. Hence, the outputs of all flip-flops do not change affect at the same time.

learn more about counters here:

https://brainly.com/question/29376736

#SPJ11

The stream insertion operator (<<) may be used to write information to a file in C++.

In C++, output to a file can be accomplished using file stream objects. The stream insertion operator (<<) is used to write data to a file through a file stream object. To do this, a file stream object is created and opened using the stream class. The file stream object is then used in conjunction with the stream insertion operator to write data to the file. For example, the following code snippet creates a file stream object, opens a file named "example.txt", and writes the string "Hello World" to the file:

#include <fstream>

using namespace std;

int main()

{

   ofstream outfile;

   outfile.open("example.txt");

   outfile << "Hello World";

   outfile.close();

   return 0;

}

This code creates an output file stream object out file and opens a file named "example.txt". It then writes the string "Hello World" to the file using the stream insertion operator (<<), and closes the file. The resulting file will contain the text "Hello World".

learn more about insertion operator here:

https://brainly.com/question/31277548

#SPJ11

Sure, here's an example of what the isstrongpassword() function might look like in JavaScript:

function isstrongpassword(password) {

 // Check if password is at least 8 characters long

 if (password.length < 8) {

   return false;

 }

 // Check if password contains at least one uppercase letter

 if (!/[A-Z]/.test(password)) {

   return false;

 }

 // Check if password contains at least one lowercase letter

 if (!/[a-z]/.test(password)) {

   return false;

 }

 // Check if password contains at least one number

 if (!/\d/.test(password)) {

   return false;

 }

 // Check if password contains at least one special character

 if (!/[^A-Za-z0-9]/.test(password)) {

   return false;

 }

 // If all conditions are met, return true

 return true;

}This function takes in a single parameter, password, and returns a boolean value indicating whether the password meets all of the specified criteria for a strong password. These criteria include:The password must be at least 8 characters lonThe password must contain at least one uppercase letteThe password must contain at least one lowercase letterThe password must contain at least one numbeThe password must contain at least one special character (i.e. any character that is not an uppercase or lowercase letter or a numberIf all of these conditions are true for the given password, the function returns true. Otherwise, it returns false.

To learn more about JavaScript  click on the link below:

brainly.com/question/30632991

#SPJ11

If the input is 12, what is the final value for numItems then final value for numItems is 101.

Here's why:

- Initially, the value of numItems is set to 0.
- We then take input from the user and store it in the variable x.
- If x is less than or equal to 12, we set numItems to 100.
- If x is greater than 12, we set numItems to 200.
- Regardless of whether numItems was set to 100 or 200, we then add 1 to it using the line "numItems = numItems + 1".
- In this case, since the input is 12, the condition "x <= 12" is true and so numItems is set to 100.
- We then add 1 to numItems, giving us a final value of 101.
Hi! Based on your provided code snippet and the input value of 12, here is the step-by-step explanation:

1. int x; int numItems = 0; // Declare variables x and numItems, and initialize numItems to 0.
2. cin >> x; // The input value for x is 12.
3. if (x <= 12) { numItems = 100; } // Since x is 12, the condition is true, and numItems is set to 100.
4. else { numItems = 200; } // This is not executed because the if condition is true.
5. numItems = numItems + 1; // numItems is incremented by 1, making it 101.

So the final value for numItems is 101. Your answer is: b. 101

To know more about numItems please refer:

https://brainly.com/question/31271420

#SPJ11

The question is related to Lab 7 Program 1, which requires the creation of three files, namely Item To Purchase.h, ItemToPurchase.cpp, and main.cpp.

1. Item To Purchase.h: This file contains the class declaration for the Item to Purchase class.
2. Item To Purchase.cpp: This file contains the class definition for the Item to Purchase class.
3. main.cpp: This file contains the main () function, which will be the entry point for your program.

For the Item To Purchase class, you need to have the following specifications:

- A default constructor: This constructor initializes the private data members to their default values.
- Public class functions (mutators & accessors):
 - Set Name () & Get Name (): These functions set and get the value of the item Name data member, respectively.
 - Set Price () & Get Price (): These functions set and get the value of the item Price data member, respectively.
 - Set Quantity () & Get Quantity (): These functions set and get the value of the item Quantity data member, respectively.
- Private data members:
 - string itemName: Initialized in the default constructor to "none".
 - int itemPrice: Initialized in the default constructor to 0.
 - int itemQuantity: Initialized in the default constructor to 0.

Make sure to implement these specifications in your program to meet the requirements of the lab assignment.

Learn more about program here:

brainly.com/question/15612386

#SPJ11

To assign IP Class C addresses to the network, we will need to follow the pattern of 192.168.X.X, where X can be any number between 0-255.

For client 1, we can assign the IP address 192.168.1.1.
For router interface 3, we can assign the IP address 192.168.3.1.
For router interface 4, we can assign the IP address 192.168.4.1.
For client 6, we can assign the IP address 192.168.6.1.
For router interface 8, we can assign the IP address 192.168.8.1.
For client 9, we can assign the IP address 192.168.9.1.

It is important to note that the subnet mask for all these addresses would be 255.255.255.0, as they belong to the same Class C network. These addresses can be used for communication between the devices within the network.
 To assign IP Class C addresses to the network.

For client 1:
IP Address: 192.168.1.1

For router interface 3:
IP Address: 192.168.1.3

For router interface 4:
IP Address: 192.168.1.4

For client 6:
IP Address: 192.168.1.6

For router interface 8:
IP Address: 192.168.1.8

For client 9:
IP Address: 192.168.1.9

In this configuration, all devices are in the same Class C network (192.168.1.0/24), which allows them to communicate with each other.

To know more about Network click here .

brainly.com/question/19745684

#SPJ11

The console output for the complete execution of main() will be: "Pop1Rice Snap Pies Crackle Kris 1 1 1 ===".

The main function creates an object of class Pies named 'pies'. This initiates a series of constructor calls throughout the class hierarchy. The order of constructor calls is Pop, Hey (3 times for the array), Rice, Snap, Crackle, Kris, and Pies. After the object 'pies' is created, "===" is printed.

Constructors are called in the order of inheritance (from base to derived class) and in the order of their declaration in the class. Similarly, destructors are called in the reverse order, but they are not considered in this case as we're only looking at the output from the constructor calls.

Learn more about destructors here:

https://brainly.com/question/30894186

#SPJ11

The code is given below to round the variable y to the nearest integer and store the result in x:

code int x = (int) round(y);

Explanation:

The round() function from the math library in C language rounds the given floating-point number to the nearest integer. Casting the result to an integer using (int) truncates the decimal part and gives the rounded value as an integer.

Here is an example code snippet demonstrating the use of the round() function and type-casting to get the rounded integer value:

#include <math.h>

#include <stdio.h>

int main() {

   double num = 4.6;

   int rounded = (int) round(num);

   printf("The rounded integer value of %f is %d\n", num, rounded);

   return 0;

}

To know more about C language click here:

https://brainly.com/question/30101710

#SPJ11

The available currency symbols depend on your local settings.

The currency symbols that are available for use in the Currency and Accounting number formats may vary depending on the locale or region settings of the system or software being used. For example, if you are using a computer or software that is set to a locale where U.S. dollars, British pounds, and euros are commonly used currencies, then you may find those currency symbols available for use in the Currency and Accounting number formats.

However, if you are using a system or software that is set to a locale where only U.S. dollars are commonly used, then you may find only the U.S. dollar currency symbol available for use in the Currency and Accounting number formats.

It's important to note that different countries and regions may have different currency symbols for their respective currencies, and the availability of currency symbols in a particular system or software may depend on the settings or configurations of that system or software. Therefore, it's best to check the settings or options within the specific system or software you are using to determine which currency symbols are available for use in the Currency and Accounting number formats.

Read more about  currency symbols  here:

https://brainly.com/question/1306721

#SPJ1

The PSD-95-like ancestor of CASK have obtained the CaMK domain is: B). "A transposon near a gene encoding a protein which contained a CaMK domain "jumped into the 5'-UTR of the MAGUK gene, taking with it a chunk of neighboring DNA including the coding sequence for the CaMK domain."

CASK (Calcium/Calmodulin-Dependent Serine Protein Kinase) is a multi-domain scaffolding protein that plays important roles in synaptic function and development. One of the domains in CASK is the CaMK (Calcium/Calmodulin-Dependent Protein Kinase) domain, which is important for its kinase activity.

The most likely explanation for how the PSD-95-like ancestor of CASK obtained the CaMK domain. This process is known as transposition and is a common mechanism for the transfer of genetic material between different regions of a genome. The other options listed are less likely to have occurred in this scenario.

Learn more about CASK: https://brainly.com/question/13812390

#SPJ11

The option that describes the computer buying experience is D. Computer hardware and software were sold together in bundles.

The computer purchasing experience can be best typified as the sale of associated hardware and software together in convergence.

In the primitive stages of private computing, this was immensely encouraged as both operating systems and supplementary programmes were dispensed by the originators of the compelling device - procuring everything needed in a sole purchase.

Learn more about computer on

https://brainly.com/question/24540334

#SPJ1

Answer:

I will say the answer is True as well ! ! ! !

To find the corresponding output for the 13-24th bits of the input "101001 000011" using the S-box in the substitution step, you would need to refer to the specific S-box table being used. Each S-box table has a unique mapping of input bits to output bits. However, without the specific S-box table, I cannot provide the corresponding 32-bit output for the given input bits.

In the step of substitution choices, the 48-bit binary input generates a 32-bit binary output using the S-box. If the 13~24th bits of input is "101001 000011", then the corresponding output for these input bits would be determined by looking up the values in the appropriate S-box. Without knowing which S-box is being used, it is not possible to determine the exact output. Each S-box has a unique substitution table that maps each possible 6-bit input to a corresponding 4-bit output. So, the 13~18th bits would be used to determine the row number and the 19~24th bits would be used to determine the column number in the appropriate S-box, and the output value would be the corresponding value from the substitution table.

Learn more about corresponding here

https://brainly.com/question/1597341

#SPJ11

To find the corresponding output for the 13-24th bits of the input "101001 000011" using the S-box in the substitution step, you would need to refer to the specific S-box table being used. Each S-box table has a unique mapping of input bits to output bits. However, without the specific S-box table, I cannot provide the corresponding 32-bit output for the given input bits.

In the step of substitution choices, the 48-bit binary input generates a 32-bit binary output using the S-box. If the 13~24th bits of input is "101001 000011", then the corresponding output for these input bits would be determined by looking up the values in the appropriate S-box. Without knowing which S-box is being used, it is not possible to determine the exact output. Each S-box has a unique substitution table that maps each possible 6-bit input to a corresponding 4-bit output. So, the 13~18th bits would be used to determine the row number and the 19~24th bits would be used to determine the column number in the appropriate S-box, and the output value would be the corresponding value from the substitution table.

Learn more about corresponding here

https://brainly.com/question/1597341

#SPJ11

This code provides a set of functions for working with a String object in C programming. The String object is defined as a struct with a dynamically allocated array to hold the characters and a length field.

The String_Init function initializes a String object to hold the values from a C string (*src), copying up to 'slength' characters. Upon successful initialization, the length of dest->data is returned, and in case of errors, a negative value is returned.

The String_Dispose function deallocates a String object and all its content. It frees the memory allocated for both the string's data and the String object itself, setting the pointer to NULL afterward.

The String_Cat function appends the contents of one String object (*src) to another (*dest). It returns the length of the updated dest->data if successful or a negative value if an error occurs.

The String_Copy function creates an exact, full copy of a String object, making a deep copy of the source string's content into the destination string. It returns the length of the copied string or a negative value in case of errors.

The String_Compare function compares two String objects lexicographically and returns a value indicating their relative order. If left precedes right, a negative value is returned; if left equals right, 0 is returned; and if left follows right, a positive value is returned.

learn more about strings here:

https://brainly.com/question/30099412

#SPJ11

To find the contents of the need matrix, we need to subtract the allocation matrix from the max matrix for each thread (t0 to t4) and resource types (a, b, c, d). The need matrix will represent the remaining resources each thread requires to complete its task.

Your given allocation and max matrices are:

Allocation:
t0: 2106
t1: 3313
t2: 2312
t3: 1234
t4: 3030

Max:
t0: 6327
t1: 5415
t2: 6614
t3: 4345
t4: 7261

Now, we will subtract the allocation matrix from the max matrix for each thread and resource type:

Need matrix:

t0: (6327 - 2106) = 4221
t1: (5415 - 3313) = 2102
t2: (6614 - 2312) = 4302
t3: (4345 - 1234) = 3111
t4: (7261 - 3030) = 4231

So, the contents of the need matrix are:
t0: 4221
t1: 2102
t2: 4302
t3: 3111
t4: 4231

Learn more about Matrix: https://brainly.com/question/31503442

#SPJ11      

HTML and Angular are both used in web development, but they serve different purposes. HTML is a markup language used to structure and present content on the web, while Angular is a JavaScript framework used for building dynamic web applications.

Angular provides a number of features that HTML does not. One of the key features of Angular is routing, which allows developers to define URLs and map them to specific components. This makes it easier to build single-page applications with multiple views, as users can navigate between them without reloading the page. Angular also provides a range of built-in components that can be used to build complex user interfaces, such as forms, tables, and modals.
In terms of roles, HTML is primarily responsible for defining the structure and content of a web page, while Angular handles the dynamic behavior and interactions. When using Angular, developers typically use HTML to define the layout and content of each component, and use Angular's data binding and directives to add functionality and interactivity. Routing plays a key role in determining which components are displayed based on the user's actions or URL changes.
Overall, while HTML is essential for web development, Angular provides additional functionality and tools that can make it easier and more efficient to build complex web applications with dynamic features and smooth navigation.

learn more about HTML here:

https://brainly.com/question/17959015

#SPJ11

Most computers typically fall into one of three types of CPU organization: (1) general Register organization; (2) single accumulator organization;or (3) stack organization is false.

The statement is incorrect. Most computers do not fall into one of the three types of CPU organization mentioned. CPU organization can vary greatly depending on the architecture and design of a computer's central processing unit (CPU). Common CPU organizations include register-based, accumulator-based, stack-based, and memory-memory-based, among others.

Therefore, The statement is partially correct. Zero-address instruction computers do have short programs because they use instructions that do not require explicit operands. However, the disadvantage mentioned is not accurate. In fact, zero-address instruction computers typically have shorter instructions as they do not need to include explicit operand addresses. This can result in more compact code and smaller program sizes.

Read more about computers here:

https://brainly.com/question/24540334

#SPJ1

Most computers typically fall into one of three types of CPU organization: (1) general Register organization; (2) single accumulator organization;or (3) stack organization is false.

The statement is incorrect. Most computers do not fall into one of the three types of CPU organization mentioned. CPU organization can vary greatly depending on the architecture and design of a computer's central processing unit (CPU). Common CPU organizations include register-based, accumulator-based, stack-based, and memory-memory-based, among others.

Therefore, The statement is partially correct. Zero-address instruction computers do have short programs because they use instructions that do not require explicit operands. However, the disadvantage mentioned is not accurate. In fact, zero-address instruction computers typically have shorter instructions as they do not need to include explicit operand addresses. This can result in more compact code and smaller program sizes.

Read more about computers here:

https://brainly.com/question/24540334

#SPJ1

The equation of the tangent line to the graph of the function f(x) = 3√(162x^3 + 567) at x = 1 is y = 27x + 702.

To find the equation of the tangent line at x = 1, we first need to find the slope of the tangent line. We can do this by finding the derivative of the function f(x) using the power rule and chain rule:

f'(x) = (1/2)(3√(162x^3 + 567))^(-1/3) * (486x^2) = 243x^2 / (2(162x^3 + 567)^(1/3))

Then, we can evaluate f'(1) to find the slope of the tangent line at x = 1:

f'(1) = 243 / (2(162 + 567)^(1/3)) = 27

Now that we have the slope, we can use the point-slope form of a line to find the equation of the tangent line:

y - f(1) = f'(1)(x - 1)
y - (3√729) = 27(x - 1)
y - 27 = 27x - 27
y = 27x + 702

Therefore, the equation of the tangent line at x = 1 is y = 27x + 702.

To use the tangent line to approximate f(1.1), we can simply plug in x = 1.1 into the equation of the tangent line:

L(1.1) = 27(1.1) + 702 = 729.7

Therefore, L(1.1) is approximately equal to f(1.1).

To know more about tangent line visit:

https://brainly.com/question/31326507

#SPJ11

One similarity between TCP's reliable data transfer protocol and the Go-Back-N protocol is that both protocols use acknowledgements (ACKs) to ensure that data has been successfully received by the receiving party.

One similarity between TCP's reliable data transfer protocol and the Go-Back-N protocol is that they both use sequence numbers to identify packets. This allows the receiver to correctly order the packets and detect missing packets.
One difference between the two protocols is that TCP uses selective repeat to handle packet loss, while Go-Back-N protocol retransmits all packets from the lost packet onwards. Selective repeat only retransmits the lost packet, which can result in more efficient use of network resources. However, it also requires more complex buffering and acknowledgment mechanisms.

To learn more about data transfer protocol, click here:

brainly.com/question/23091934

#SPJ11

True. In most programming languages, the number of arguments that can be passed to a function is limited, either by design or by available memory resources.

#SPJ11

To learn Arguments in function: https://brainly.com/question/29384463

Answer:

democratic

Explanation:

The modified code using a for loop, range function, and loop variable to add up all even integers from 2 to 10 is provided with an explanation.

How can the given program be rewritten using a for loop, range function, and loop variable to add up all even integers from 2 to 10?

I can help you rewrite the program using a for loop, range function, and the loop variable evenNum to add up all the even integers from 2 to 10 (inclusive).

Here's the modified code:

```python
sum_even_numbers = 0

for evenNum in range(2, 11, 2):
   sum_even_numbers += evenNum

print(sum_even_numbers)
```

Learn more about loop

brainly.com/question/30706582

#SPJ11

To complete these steps, you will need to use the Macro Recorder feature in your spreadsheet program. This feature allows you to record a series of actions and create a macro that can be run again in the future.

1. To start, open the spreadsheet where you want to create the macro. Then, go to the Macro Recorder feature and click on "Record Macro." Name the macro "ClearInvoice" and add the description "This macro clears existing values in the current invoice." Don't forget the period at the end.2. With the Macro Recorder still running, highlight cells C7 to C11 and delete their contents simultaneously. This will be recorded as part of the macro.
3. After deleting the contents, type "Name" in cell C7 and press ENTER. The remaining cell contents should autocomplete.
4. When you have finished these steps, stop recording the macro.
5. Finally, save the file as a macro-enabled template using the default name. This will ensure that the macro is available whenever you open this particular template.
Using the Macro Recorder can save you time and effort in the long run by automating repetitive tasks. By following these steps, you can create a useful macro that clears existing values in the current invoice and updates the Name field automatically.

To learn more about Recorder click the link below:

brainly.com/question/29847134

#SPJ11

The report that lists the website pages where users first arrived is called the Landing Pages report. It provides valuable insights into pages that are driving traffic to a website, can help businesses optimize their marketing efforts.

This report shows which pages are most effective in attracting users and converting them into customers. It is an essential tool for businesses looking to improve their online presence and maximize their website's potential. In summary, the Landing Pages report is a crucial analytics tool for any website owner looking to understand user behavior and improve website performance.

This report can assist marketers in determining which marketing initiatives or channels are most successful in generating website visitors as well as leads or sales. The Landing Pages report is an essential tool for enhancing website performance and boosting online success, to sum up.

Learn more about  Landing Pages report here

https://brainly.com/question/31562947

#SPJ11