Write the chemical formulas and names for the following ionic compounds. Cobalt (III) and bromine

Answer:

Dilute the sample

Explanation:

The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.

However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.

The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.

At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.

Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.

Learn more about proteins here:

https://brainly.com/question/30986280

#SPJ 6

Answer:

answer is electron cloud model

The answer is c. Matter can be changed, but not created or destroyed.

Answer:

A. oxygen

Explanation:

Oxygen is the waste created after photosynthesis.

Answer:

oxygen

Explanation:

photosynthesis are for plants and plants don't need oxygen

Answer:16g

Explanation:A solution's percent concentration by mass,

% w/w

, basically tells you what mass of solute you get per

100 g

of solution.

Sulfuric acid undergoes dissociation reaction to produce twice the amount

of hydrogen ions produced by nitric acid in solution.

Reasons:

The concentration of the analytical group = 0.2 M

Volume of reagent = 20 ml

Concentration of the nitric acid to be replaced = 0.1 M

Replacement for the nitric acid = Sulfuric acid

Concentration of the sulfuric acid = Concentration of the nitric acid = 0.1 M

Reaction = Titration

Solution:

Sulfuric acid in solution gives; H₂SO₄ (aq)  ⇄ 2H⁺ (aq) + SO₄²⁻(aq)

For nitric acid, we have; HNO₃ (aq) ⇄ H⁺(aq) + NO₃⁻(aq)

Therefore;

1 mole of sulfuric acid gives 2 moles of hydrogen ions

0.1 M solution of sulfuric acid gives 0.2 moles of hydrogen ions per liter

0.1 moles of hydrogen ions are therefore present in half a liter solution of 0.1 M sulfuric acid solution.

However;

0.1 M of nitric acid gives 0.1 moles of hydrogen ions per liter

Therefore;

Learn more about titration and quantitative chemical analysis here:

https://brainly.com/question/6800262

https://brainly.com/question/6548806

https://brainly.com/question/13031875

Answer:

She remembered what she had learned about the cell theory as she observed the protists moving. Which three ideas are included in the cell theory ..

Explanation:

Answer:

show me a pic?? then I'll lyk

Answer

16g

Percent by mass=  mass of solute/mass of solution * 100

Explanation: work out the equation

Answer:

A) HF (Hydrofluoric acid)

Explanation:

dw I gotchu. So first off there are three types of intermolecular forces of attraction: 1) London-Dispersion, 2) Dipole-Dipole, 3) Hydrogen-Bonding Attraction Forces. That is also ranked in increasing strength, with Hydrogen-Bonding Attraction Forces being the strongest. Every molecule has London-Dispersion forces present and all the diatomic molecules listed have dipole moments of a certain debye (or Coloumb-meter) value. Both are irrelevant here so dw about that. Lets look at the strongest attraction: the hydrogen-bonding one. Now, don't get confused bc all of these acids are bonded to H bc hydrogen-bonding attraction forces only occur when H is bonded to N, O, or F. So Process of Elimination, hydrofluoric acid (HF) has the strongest intermolecular forces of attraction.

Note: If you don't know what inter/intra molecular forces of attraction are, ill give u a quick summary. Intermolecular refers to electrostatic attractions between molecules while intramolecular refers to the actual bonds, single, double, or triple, binding the atoms together. Well there you have it, have a great day. :)

Answer:

If the Oort cloud exists which it most likely does it would be C

Explanation:

Answer:

option C two organisms with desired traits are bred

Answer:

See below

Explanation:

This is a simple reaction.

Calcium and chlorine molecule are combined to get calcium chloride.

Ca + Cl₂ → CaCl₂

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

it is because of Dark Matter

Dark Matter, component of the universe whose presence is discerned from its gravitational attraction rather than its luminosity. Dark matter makes up 30.1 percent of the matter-energy composition of the universe; the rest is dark energy (69.4 percent) and “ordinary” visible matter (0.5 percent).

Dark matter is composed of particles that do not absorb, reflect, or emit light, so they cannot be detected by observing electromagnetic radiation. Dark matter is material that cannot be seen directly.

Explanation:

Hope It helps

Have A Nice Day : )

A group of scientists is studying observable matter in a cluster of galaxies. The duster remains intact due to the gravitational pull.

A galaxy is a collection of stars, stellar remains, interstellar gas, dust, and dark matter that are gravitationally bonded together.

Dark matter is a component of the universe whose gravitational pull can be detected rather than its luminosity. The universe's matter-energy ratio is made up of 30.1 percent dark matter, 69.4 percent dark energy, and “regular” visible matter (0.5 percent).

Since dark matter is made up of particles that do not absorb, reflect, or emit light, it is impossible to identify it through electromagnetic radiation observation. Dark matter is a substance that cannot be directly observed.

Therefore, a team of researchers is examining the material that can be seen in a clump of galaxies. Due to the gravitational force, the duster is unharmed.

To learn more about duster, refer to the link:

https://brainly.com/question/24544674

#SPJ2

Answer:

bro thats plagiarism

Explanation:

Answer:

Volume occupied is approx.  

38 ⋅ ML

Explanation:

Density  ρ = Mass  Volume  And thus  Volume  = Mass  ρ = 1.592 ⋅ l b × 454 ⋅ g ⋅ l b − 1 19.3 ⋅ g ⋅ m L − 1   =   ? ? ⋅ m L

Answer:

it's actually made of silicates and believe it or not magnesium is a silicates so the closest would have to be A made of magnesium, iron, and calcium

Answer:

21

Explanation:

Let us count the number of individual atoms for Na2S2O3 (the compound name):

Na: 2

S: 2

O: 3

This brings us to a total of 7 atoms for one molecule of sodium thiosulfate. For three of these compounds, we get 3*7=21

Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.

A chemical reaction is said to have occurred when new substances are formed. The reaction between magnesium chloride  solution and sodium carbonate solution is a double decomposition reaction since the cations exchange anion partners in the product;

MgCl2(aq) + Na2CO3(aq) ------> MgCO3(s) + 2NaCl(aq)

We must note that a single replacement reaction depends on the relative positions of metals in the electrochemical series. Al can react with CuCl2 because Al is more reactive than copper and ahead of Cu in the electrochemical series. On the other hand, Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.

Lear more about electrochemical series: https://brainly.com/question/25749323

Answer:

The oxidation number for sulfur in SO2 is +4.

Explanation:

To find the oxidation number of sulfur, it is simply a matter of using the formula SO2 and writing the oxidation numbers as S = (x) and O2 = 2(-2) = -4. Using the rule and adding the oxidation numbers in the compound, the equation becomes x +(-4 ) = 0. Solving for x, it is evident that the oxidation number for sulfur is +4.

Answer:

by using this formula 2×(n)^२

Answer:

M-A=N

Explanation:

M-A=N

Here is an example.

The equation above means that the atomic number (A) subtracted from the average atomic mass (M) equals the combined amount of neutrons and protons. Since we know that 35 17Cl is Chlorine (this is because Chlorine (Cl) is the 17th number on the periodic table and has the average atomic mass of 35), we can insert our data into the equation and end up with the following:

35-17=18.

From here, we can tell that we have a mix of neutrons and protons, with the total being 18. Since the atomic number is 17, we can reasonably assume that there are 17 protons and 1 neutron.

But we still need to find the number of electrons. Fortunately, the number of electrons is always equivilant to the number of protons and the atomic mass, so we know that the number of electrons is 17.

So, we have;

17 Protons

1 Neutron

17 Electrons

Answer: i did the ones i knew

1. thorns

2. smell

6. long roots

8. smell

9. thorns

Explanation:

Answer:

The atomic number on the Periodic Table will tell you how many protons are in the nucleus of each atom.

Explanation:

number of electrons and protons should be equal in a neutral atom. Because each electron has a -1 charge, and each proton a +1 charge, the number of each must be the same for the net charge to equal zero.

Answer:

s=d/t. d=540 t=9h

540÷90=6 km/h

Answer:

mercury i think

Explanation:

Answer:

Mercury is the densest liquid at standard conditions for temperature and pressure (STP). Also called quicksilver, mercury has been known for more than 3,500 years. It is an important metal in industry, but it is also toxic

Explanation:

Considering the reaction stoichiometry, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.

The balanced reaction is:

2 H₂ + O₂ → 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 1 moles of O₂ produce 2 moles of H₂O, 13.35 moles of O₂ will produce how many moles of H₂O?

[tex]amount of moles of H_{2} O=\frac{13.35 moles of O_{2} x2 moles of H_{2} O}{1 mole of O_{2}}[/tex]

amount of moles of H₂O= 26.7 moles

Finally, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.

Learn more about stoichiometry:

Answer: 4.123 x 10^22

Explanation:

The first step is to determine how many moles of sulfur hexafluoride (SF6) there are. To do this, you must take the mass of the SF6 (10g) and divide it by the molar mass (146.06).

[tex]10g * \frac{1 mol}{146.06 g}= 0.068465 mol[/tex]

Then you must use Avagadros number to find the number of molecules.

Avagadros number is the number of molecules in 1 mol of a substance, so a simple multiplication will do the trick.

[tex]0.068465mol * \frac{6.022 * 10^{23}}{1mol} = 4.123*10^{22}[/tex]

And that is your answer. There are 4.123 x 10^22 molecules of sulfur hexafluoride in 10g of it.