Why is it hard to respond with action at times?

Answers

Answer 1
Yes it can be very hard
Answer 2
Usually people would sometimes need an example as an action

Related Questions

I need the answer now

Answers

Answer:

It's C) color

Explanation:

--------

I dropped a wet bar of soap on the ground is the bar of soap dirty or is the floor clean???

Answers

Answer:

the floor is clean and the soap is dirty. lol

car moves 5km East,3km south,2km West, 1km north find displacement
(please show me the way)​

Answers

Answer:

3.605551275463989

Explanation:

solve using Pythagorean theorem

as you heat a piece of wood on a fire, the temperature of the wood increases. what does this tell you?

a. the molecules in the wood are vibrating faster
b. the total thermal energy of the wood is decreasing
c. the chemical energy of the wood is increasing
d. the molecules in the wood are vibrating more slowly

Answers

Answer:

A.

Explanation:

I remember this one from my science class.

The molecules in the wood are vibrating faster .

What is Heating?

During heating, the temperature of any object or substance increases. This cause the particles to move faster as they gain kinetic energy which leads to an increase in the collision rate as well as diffusion.

Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.

The International System of Units (SI) defines the calorie (cal) as the standard unit of heat. The cal measures the amount of energy transfer needed to raise the temperature of one gram of pure liquid water by one degree Celsius, provided that the water is above the freezing point and below the boiling point.

Therefore, The molecules in the wood are vibrating faster .

To learn more about Heat, refer to the link:

https://brainly.com/question/1429452

#SPJ2

Who could explain the phenomenom of interference of light?​

Answers

Answer:

When the waves reflected from the inner and outer surface combine they will interfere with each other, removing or reinforcing some parts of white light by destructive or constructive interference. ... This results in color.

Explanation:

this is what we studied

so basically  there is like a surface

and 2 different waves coming out of the same source

they will combine and start removing parts of the white light (which originally consists of 6 to 7 colors)

results in showing these colors

Use this table of a school bus during morning pickups to answer the question.

What is the average speed of the bus between 2.8 km and 4.2 km?

Answers

Answer:

3.5

Explanation:

The answer should be 3.5

Answer:

3.5

Explanation:

Q4. Cheetahs have a top speed of 120 km/h and can accelerate at a constant rate of 9.5 m/s2. How long would it take a cheetah, stalking its prey at 4.2 m/s, to reach its top speed?

Answers

Maybe u can use the volocity combined with the soeedforce

A uniform marble rolls down a symmetric bowl, starting from rest at the top of the left side. The top of each side is a distance h above the bottom of the bowl. The left half of the bowl is rough enough to cause the marble to roll without slipping, but the right half has no friction because it is coated with oil.

Answers

Answer:

[tex]h' = \dfrac{5}{7}h[/tex]

Explanation:

To find how far will the smooth side will the marble go in the upper direction, measured vertically from the bottom (leave your answer in terms of h)?

From the given information:

The potential energy for the marble starting at rest is:

PE = m*g*h

In the bottom of the bowl; the marble exhibit a linear and rotational K.E

[tex]K.E_{total} = K.E _{linear} + K.E _{rot}[/tex]

[tex]K.E_{total} = \dfrac{1}{2}mv^2+I\omega^2[/tex]

[tex]K.E_{total} = \dfrac{1}{2}mv^2+ \dfrac{1}{2}( \dfrac{2}{5}mR^2) ( \dfrac{v}{R})^2[/tex]

[tex]K.E_{total} = \dfrac{1}{2}mv^2+ \dfrac{1}{5}mv^2[/tex]

[tex]K.E_{total} = (\dfrac{5+2}{10})mv^2[/tex]

[tex]K.E_{total} = \dfrac{7}{10}mv^2[/tex]

By applying Conservation of energy, The Total Energy occurring in the marble when it started at rest is the same as the total energy when it gets to the midpoint in the bowl.

i.e.

[tex]P.E = K.E_{total}[/tex]

[tex]mgh = \dfrac{7}{10 }mv^2[/tex]

10 × mgh= 7mv²

making v² the subject of the formula, we get:

[tex]v^2 = \dfrac{10}{7 }gh[/tex]

Let us remember that the rotational K.E occurring at the midpoint of the bowl is still unchanged at the time the marble is moving to the left side.

Thus, by applying the Conservation of energy balance:

The linear K.E at the midpoint = The P.E of the marble

[tex]\dfrac{1}{2}mv^2 = mgh'[/tex]

Making h' the subject, we get:

mv² = 2mgh'

Divide both sides by m

v² = 2gh'

Recall that [tex]v^2 = \dfrac{10}{7 }gh[/tex]

[tex]\dfrac{10}{7} gh = 2gh'[/tex]

10 gh = 14 gh'

Divide both sides by 2g

5h = 7h'

[tex]h' = \dfrac{5}{7}h[/tex]

Please help with this! The selected answer is the incorrect one, I'm making corrections.

Answers

Answer:

The answer is C-Spin a magnet around the wire on the piece of iron. Hope that helps :)

What must be done to the wires used to make an electromagnet before they are connected​

Answers

Answer:

Neatly wrap the wire around the nail

Explanation:

hope this helps ( not sure tho )

Before connecting the wires used to make an electromagnet, several steps are necessary. The steps are removing insulation from wire ends and cleaning and connecting the prepared wire ends.

First, the insulation surrounding the wire ends must be removed using a blade. Next, the exposed ends should be cleaned with a wire brush or sandpaper to eliminate any dirt or oxidation. Depending on the requirements, the wires can be twisted together for a temporary connection or soldered for a more secure joint. Lastly, the prepared wire ends are connected as needed to complete the circuit.

Therefore, these steps ensure that the wires are properly prepared, allowing for effective current flow and the formation of a functional electromagnet.

For more details regarding electromagnet, visit:

https://brainly.com/question/31038220

#SPJ2


When two objects collide, they experience the exact same amount of force in opposite directions.
O True
O False

Answers

Answer:

True

Explanation:

In a collision between two objects, both objects experience forces that are equal in magnitude and opposite in direction. Such forces often cause one object to speed up (gain momentum) and the other object to slow down (lose momentum).

true because they experience the force from the other object, and the other experiences its force.

Can someone help me or find the answers to this chart please?

Answers

Explanation:

this is too though bro do it by ur self

A subwoofer needs a household voltage of 110 V to push a current of 5.5 A through its coil. What is the resistance of the subwoofer?

Answers

Answer:20Ω

Explanation:

Complete the passage.

Sound waves and some earthquake waves are
waves. Ocean, light, and other earthquake waves are
waves.

Answers

Answer:

Answer: Sound waves and some earthquake waves are longitudinal waves. Ocean, light and other earthquake waves are transverse waves.

Explanation:

There are 2 types of waves:

1. Longitudinal waves: These waves are defined as the waves in which the particles of the medium move in the direction of the wave. This requires a medium to travel. For Example: Sound Waves.

2. Transverse wave: These waves are defined as the waves in which the particles of the medium travel perpendicularly to the direction of the wave. This does not require a medium to travel. These can travel in vacuum also. For Example: Light waves.

Hence, Sound waves and some earthquake waves are longitudinal waves. Ocean, light and other earthquake waves are transverse waves

Answer:

Longitudinal, transverse.

Explanation:

The definitions:

Longitudinal wave: A type of wave that transfers energy parallel to the direction of wave motion.

Transverse wave: A type of wave that transfers energy perpendicular to the direction of wave motion.

Also:

Justin strikes a 0.058-kg golf ball with a force of 260 N. If the ball moves with a velocity of 63 m/s, calculate the time the ball is in contact with the club

Answers

Answer:

0.014s

Explanation:

Given parameters:

Mass of the ball  = 0.058kg

Force  = 260N

Velocity of the ball  = 63m/s

Unknown:

Time of contact  = ?

Solution:

To solve this problem, we apply Newton's second law of motion which is mathematically expressed as;

    Ft  = m(v - u)

F is the force

t is time

m is the mass

v is the final velocity

u is the initial velocity = 0m/s

   Insert the parameters and find t;

      260 x t  = 0.058(63 - 0)

       260t  = 3.65

            t = 0.014s

Scott was watching the electrician install a new light fixture. Scott noticed that when he was finished, he carefully wrapped some wires with plastic caps and black plastic tape. Select the best explanation of why the electrician would wrap electrical wires with plastic products.

Answers

Answer: The electrician wrapped the wires with plastic caps because plastic is an insulator.

Explanation: Metals are excellent conductors of electricity, largely because electrons in the metal are only loosely bound by their respective atoms and thus will readily flow under the influence of an external electric field. Plastics are very different. All the electrons in plastics are tightly bound by their respective molecules and it would take a lot of energy to remove them. Consequently, most plastics are insulators that do not conduct electric current (or do so only poorly).

Study the arrow that is circled in the image.

What happens at this point?

Warm air is rising.
Cool air is sinking.
There is a difference in air pressure.
Cool air is less dense than warm air.

Answers

Answer:

There is a difference in air pressure.

Explanation:

I hope this helps you, BTW I got this right when I did the test

The given point is the separation between hot and cold current as a result of difference in air pressure.

What is a convection current?

A convection current is a type of heat transfer that occurs from the movement of hot air and cold air due to difference in air pressure.

Upward arrow

The upward arrow shows hot air rising up due to its low density.

Downward arrow

The downward arrow shows cold moving downwards to replace the risen hot air due to its high density.

Thus, the difference in air pressure between the hot air and cold air is causes convection current.

Learn more about convection current here: https://brainly.com/question/20295382

forces acting on a ball as it is being squeezed

Answers

Squishy pls explain

Przyjrzyj się ilustracji, a następnie wykonaj polecenia.


2) Dopasuj do każdej cyfry rzymskiej nazwę substancjí z ramki poniže


. • lod


• szkło


V


• plastik


dwutlenek węgla


• woda

Answers

Answer:

what is this???

I don't know these kind of language exist...

Volleyball was invented in 1905.

Answers

Answer:

REALLY??

Explanation:

Volleyball was invented in 1905.

A plane travels at a constant speed of 250 m/s as it flies once around a horizontal circle whose radius is 2542m.

a) how long does it take to fly around the circle one ?

b) If the speed were to double, what would happen to the acceleration that the plane experiences ?

c) What is the current value of the acceleration that the plane experiences?

d) if possible, find the net force acting on the plane during this turn. If it’s not possible, what information are we missing?

Answers

C has to be the correct answer

What is the mass of a bird if it has a potential energy of 147J when flying at a height of 30 m above the ground?

Answers

Answer:

0.5kg

Explanation:

Given parameters:

Potential energy = 147J

Height  = 30m

Unknown:

Mass of the bird  = ?

Solution:

Potential energy is the energy due to the position of a body. Now, the expression for finding the potential energy is given as;

      P.E  = mgH

m is the mass

g is the acceleration due to gravity = 9.8m/s²

H is the height

      147  = m x 9.8 x 30

         m = 0.5kg

A bus approaches red traffic light, and slows down from a speed of 15
m/s to rest in 3 seconds. What is the average acceleration (in m/s)?

Answers

Answer:

-5

Explanation:

-15/3

What is the most abundant gas in the atmosphere?

Group of answer choices

Oxygen

Nitrogen

Carbon Dioxide

Water Vapor

Answers

Answer: Nitrogen

Explanation: Nitrogen makes up 78% of the atmosphere, Oxygen makes up 21%, and Argon 0.9%.

Water vaper makes up between 1-4%, depending on the region.

Carbon Dioxide makes up only about 0.04%.

Answer: The answer is: Nitrogen

Explanation: I have my ways ;>

What is .00245 in scientific notation?

Answers

Answer:

2.45 x 10^-2

Explanation:

All numbers in scientific notation or standard form are written in the form

m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.

To convert 0.0245 into scientific notation, follow these steps:

Step 1) Move the decimal 2 times to right in the number so that the resulting number, m = 2.45, is greater than or equal to 1 but less than 10

Step 2) Since we moved the decimal to the right the exponent n is negative

n = -2

Step 3) Write in the scientific notation form m × 10n

= 2.45 × 10-2

Therefore,

2.45 × 10-2 is the scientific notation form of 0.0245 number and 2.45e-2 is the scientific e-notation form for 0.0245

Here are some examples of decimal to scientific notation calculator

Can someone plz help me on this, it would me alot to me
thx

Answers

Answer:

its a opinonated question

Explanation:

XD

How do you find the average speed of three speeds?

Answers

Answer:

Assess what information you are given. Use this method if you know:

the total distance covered by one person or vehicle; and

the total time it took that person or vehicle to cover the distance.

Explanation:

Hope this helps! I might be wrong, so tell me if I am

Answer:

Average speed can be calculated by dividing the total distance the object travels by the total amount of time it takes to travel that distance.

Explanation:

This is as much as I can help you, i don't know much else on how to do that ;w; sorry

Which two explanations are based on personal beliefs?

I A. Certain mineral crystals have properties that help protect the

body from illness.

IB. A constellation's position in the night sky can be used to predict

events in a person's life.

I C. Medical data gathered over many years show that lack of

adequate sleep causes health problems.

D. Observations using microscopes reveal that all known organisms

are composed of tiny structures called cells.

I E. Data gathered during experiments show that there is an inverse

relationship between the force of gravity and distance.

Answers

Answer:

The correct options are A and B

Explanation:

Personal beliefs can be described as beliefs that have not been scientifically proven. These beliefs are generally as a result of religion, culture or tradition. Scientifically in theory, these beliefs lack clear path of possibility. For example, being in possession of certain mineral crystals in order to help protect the body against illness have a little possibility of being scientifically (in theory) explained. There is also no scientific evidence to support this claim.

There is also no scientific evidence to support the idea of the constellation's position to predict  events in a person's life. This also has little possibility of being theoretically explained in science.

It should however be noted that there are exceptions/coincidences that suggest these events happen as it has been listed in the two options.

Answer: A and B!

Explanation: Just took the quiz.

when measuring the potential difference across a component, you need

Answers

Answer:

Measuring potential difference Potential difference is measured using a device called a . Just like ammeters, some types have a pointer on a dial, but most have a digital display. However, unlike an ammeter, you must connect the voltmeter in parallel to measure the potential difference across a component in a circuit.

To measure the potential difference across a component, a voltmeter must be placed in parallel with that component in order to measure the difference in energy from one side of the component to the other. Potential difference is also known as voltage and is measured in volts (V).

A vector quantity is a quantity that has:
A.time and direction
B.magnitude and direction
C.direction only
D.magnitude and time

Answers

Answer:

B

Explanation:

a vector quantity has direction and magnitude

Other Questions
Plz help me ty very mychhh In the case of Korematsu v. United States (1944) the Supreme Court ruled that the government did not violate the Constitution by ordering the forced relocation of Japanese Americans to internment camps. According to the Court, this is because the order __________. A. applied only to Japanese Americans living on the West Coast B. lasted for a limited amount of time C. was issued during wartime D. provided relocated individuals with a large income while they lived in the camps Please select the best answer from the choices provided A B C D An object's velocity can be described by its acceleration and direction. true or false Paul, Colin and Brian are waiters. One night the restaurant earns tips totalling 78.40. They share the tips in the ratio 2:1:5. How much more does Brian get over Colin? The ratio of the side lengths of a triangle is 2:3:4. The shortest side is 15 inches. What is the perimeter? Explain. Pleas show your work. I will give brainiest to the best and first answer complete the solution of the equation find the value of y when x equals 1 9x + 7y = -12 What is 1232456 * 789456? I will mark brainliest!! -1/2x + 2/3 + 1 = 11/12 Which best explains why a patient who had a myocardial infarction will never fully recover, in spite of all the drugs prescribed to him? The drugs are only effective for extremely active, healthy individuals. The drugs cannot rebuild the cells that died, but they can limit the death of more. The drugs restore blood flow to some of the arteries, but not arteries in the legs. The drugs prevent another heart attack, but other damage has already occurred. What is SAT? I'm adding extra words right now to ask the question Answer the questions.Answer the questions about page 64.1. List at least three flashback memories Annie had.2. What kind of relationship did Annie seem to have with her mother? 3. What are some reasons parents and children argue over clothing? What does the seventh man see inside the wave? World history! Answer? what is the ordered solution to this equation:-9x-y=15 PLSSS HELP ILL MARK BRAINLIEST!!!!What is the value of the expression shown below?3+ (2 + 8)^2 = 4x(1/2)^4 Question 3: Consider the multiplexer to the right. With F(x..Z) as outputfunction.Fill in the truth table of F.1 -0NF1mux20 -3X YX YzF0 0 0 00 0 1 00 101111001 0 11 1 01 1 1HAI please help!!!!!!!!!!!!!! Raquel Ruined 18 of her 30 assignments by spilling her smoothie. What percent of her assignments were not ruined? In the diagram, AB and CD are straight lines. What is the value of x? What formulas can you use to find the point P(x, y) along the line segment between A(x1 , y1 ) and B(x2 , y2 ) that is a fractional distance k from A?