Answer:
Ecological succession is the process by which
the mix of species and habitat in an area changes over time.Gradually, these communities replace one another until a “climax community”—like a mature forest—is reached, or until a disturbance, like a fire, occurs. Ecological succession is a fundamental concept in ecology.
Explanation:
i hope it helps uh.!!
to a 1 l solution of 0.1 m acetic acid solution, 20 g of sodium acetate is dissolved. what is the ph of the solution
The pH of the given solution would be 4.75.
What do you mean by pH?
pH is a measure of the acidity or alkalinity of a solution, usually expressed on a scale from 0 to 14. A pH of 7 is neutral, with solutions below 7 being acidic and solutions above 7 being alkaline.
The pH of the solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([salt]/[acid])
Where pKa is the -log of the acid dissociation constant (in this case, 4.75 for acetic acid), [salt] is the molar concentration of the salt (in this case, 0.1 M for sodium acetate), and [acid] is the molar concentration of the acid (in this case, 0.1 M for acetic acid).
Plugging in the values, we get
pH = 4.75 + log(0.1/0.1)
pH = 4.75
Therefore, the pH of the solution is 4.75.
What is an acetic acid solution?
An acetic acid solution is a solution made up of acetic acid and water. Acetic acid, also known as ethanoic acid, is an organic acid which is the main component of vinegar. It has a strong, pungent odor and sour taste, and is used in many household products and industrial applications.
To know more about pH,
https://brainly.com/question/27905117
#SPJ4
A scientist has two substances that she is testing in her lab: a pink substance and a green substance. At room temperature, both substances are liquids. The scientist transferred the same amount of energy into both substances. She finds only the pink substance changed phase. How is the pink substance different from the green substance?.
The pink substance different from the green substance because the pink solution is thought to have a lesser intermolecular force than the green solution, which causes molecules to disperse as a result.
Consider the attraction between the molecules of the pink substance to be weaker than that of the molecules of the green substance. Each of its molecules separates from the others. It's important to take into account the following data:
In comparison to the green substance, the attraction between the molecules in the pink substance is thought to be less. It moves apart from one another and changes from liquid to gas.
So, we can say that the pink solution is thought to have a less intermolecular force than the green solution, which leads to the dispersion of molecules.
To learn more about Dispersion of molecules, here :
https://brainly.com/question/4301021?referrer=searchResults
#SPJ4
Ferum + nitric acid =
What does it equals to ????
Answer:
Ferric Nitrate, Nitric oxide and water
Explanation:
Fe + dil. HNO3 gives iron nitrate along with NO . The resulting compounds would be ferric nitrate, nitric oxide, and water.
I hope this helped
Answer:
Ferric Nitrate, Nitric oxide and Water
Explanation:
Fe (NO3)3 , NO, H20
Limestone forms as ocean water evaporates and leaves calcium carbonate behind, which is then deposited on the ocean floor. what type of rock can be formed in this way?
Sedimentary rocks include limestone. When ocean water evaporates, calcium carbonate is left behind, and this is how it forms.
Limestone is one of the most common types of chemical rocks. Limestone is created in the ocean by calcium and bicarbonate ions that erode from the remains of shells, coral, crustaceans, and mollusks. Wave action gradually disintegrates these structures into calcite and other calcium carbonate-based minerals, which accumulate in ocean water. As they are carried from the deep ocean environment to shallow places like lagoons and tidal pools, these solutes have the potential to precipitate to create sediments rich in calcium carbonate. calcium carbonate can precipitate in lagoons to create ooids, which are spherical nodules that stick together to produce oolitic limestone, or limestone.
to know more about oolitic limestone visit
https://brainly.com/question/25408163
#SPJ4
C₂H6
+
02
→
CO2
+
H₂O
Answer:
Word equation: Ethane + Dioxygen = Carbon Dioxide + Water
Explanation:
Brainliest, Please!
Calculate the kinetic energy of the cart at the point shown below. It has a mass of 225 kg, is 10 m high, and is moving at a velocity of 2 m/s.
The kinetic energy of the cart of mass 225 kg is 450 J.
What is kinetic energy?Kinetic energy is the energy of a body in motion.
To calculate the kinetic energy of the cart, we use the formula below.
Formula:
K.E = mv²/2.......... Equation 1Where:
K.E = Kinetic energy of the cart m = Mass of the cartv = Velocity of the cartFrom the question,
Given:
m = 225 kgv = 2 m/sSubstitute these values into equation 1
K.E = 225×2²/2K.E = 450 JHence, the kinetic energy of the cart is 450 J.
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ1
balancing chemical equations
N₂(g) + H₂(g) → NH₂
please help lol
Answer:
N2 + 3H2 => 2NH3
Explanation:
N2 + 3H2 => 2NH3
N = 2
H = 6
It's NH3, not NH2
In a single displacement reaction between al2s3 and li, what products will form and why?.
The products formed during the single displacement reaction between Al₂S₃ and Li are Li₂S₃ and Al.
What are deplacement reactions?
When a more reactive element pushes a less reactive element out of a compound that also contains the less reactive element, a displacement reaction takes place. The less reactive element has undergone a displacement reaction and is now pure and unmixed.
In the reaction of Al₂S₃ and Li the following is observed:
Li+ Al₂S₃ = Li₂S₃ +Al
Lithium displaces aluminium here.
Hence the products formed during the single displacement reaction between Al₂S₃ and Li are Li₂S₃ and Al.
To know more about displacement reaction from the given link
https://brainly.com/question/7959057
#SPJ4
What is the number of atoms per unit cell for each metal? enter a number e. G. 1, 2, 3, 4, 5, 6, etc polonium (the first one - pink) manganese (the second - darker grey) silver (the last one - the lighter grey).
Polonium has a simple cubic cell(1 atom), manganese has a body-centered cube(2 atoms) and Silver is a face-centered cubic cell(4 atoms).
In each of the 3 unit cells of the metals, for every corner of the cell, there is 1/8th volume of the sphere. The total volume of the sphere is given by,
Total volume = 1/8th corner of cube x 8 Total Volume
= 1 sphere or atom
Hence, Polonium has only one atom in its cell whereas Manganese has 2 atoms in its cell, one in the corner and one in the center of the cell.
In the case of silver, apart from the corners in each of the faces, there is one hemisphere in each of the faces. There are 6 such faces in the cell. Therefore the number of atoms in silver is given by,
No of atoms in silver = 6 x 1/2 + 8 x 1/8
No of atoms in silver = 4 atoms in each cell.
In conclusion, it can be said that Polonium has a simple cubic cell, Manganese has a body-centered cube and Silver is a face-centered cubic cell.
To know more about lattice arrangement, click below:
https://brainly.com/question/28301565
#SPJ4
nuclear decay occurs according to first-order kinetics. a nuclide decays in 3.40 days from 45.0 g to 12.1 g. what is the rate constant for the nuclide?
The rate constant for the nuclide according to first-order kinetics is 0.3863 per day.
Nuclear Decay in First-Order Kinetics:
m(t) = Me∧(-αt)
where m(t) = mass of nuclide after decay at time t;
M = mass of nuclide before decay;
α = rate constant of decay;
t = time for the decay;
What is first-order kinetics?When a fixed percentage of the drug is excreted per unit of time, this is known as first-order kinetics.
For example, The amount of drug in the body has a direct relationship to the rate of removal. The amount of medication eliminated per unit of time increases with concentration. The medication concentration decreases by 50% for each half-life.
Now,
m(t) = Me∧(-αt)
⇒e∧(αt) = M/m(t)
applying ln on both sides;
αt = ln(m/m(t))
α = (ln(m/m(t))/t)
here t= 3.4 days, M = 45 grams, m(t) = 12.1 grams;
dropping these values in the above equation we get,
α = 0.3863 per day;
The rate constant for the nuclide according to first-order kinetics is 0.3863 per day.
To refer more about First Order Kinetics visit:
https://brainly.com/question/14977977
#SPJ4
polysynaptic reflexes involve multiple synapses while monosynaptic reflexes only involve a single synapse.
It is true that monosynaptic reflexes only involve one synapse while polysynaptic reflexes include several synapses.
Monosynaptic reflexes:
The biceps, triceps, and patellar stretch reflexes are examples of monosynaptic reflexes. Conversely, polysynaptic reflexes are mediated by one interneuron and at least two synapses.
Polysynaptic reflexes:
Polysynaptic reflexes are a specific type of reflex that involve several synapses. In the reflex arc, they also involve one or more interneurons. As a result, afferent and efferent neuron communication is often diffuse. Interneurons between sensory and motor neurons are present in polysynaptic reflex.
To learn more about Polysynaptic reflexes click
brainly.com/question/29057796
#SPJ4
How many grams of CO would be required to generate 635 g CO2? Fe2O3 + 3CO → 2Fe + 3CO2 CO: 28.01 g/mol CO2: 44.01 g/mol [?] g CO₂
3 moles or 84.03 g of CO produces 3 moles of or 132 g of CO₂. Thus, the mass of CO required to produce 635 g of CO₂ is 404.23 g.
What is carbon monoxide?Carbon monoxide is an inorganic gas produced from the covalent bonding of carbon with oxygen. When carbon monoxide reacts with metal oxides it produces carbon dioxide.
From the given balanced reaction, 3 moles of CO produces 3 moles of CO₂.
Molar mass of CO = 28.01 g/mol, 3 moles = (28.01 ×3) 84.03 g
molar mass of CO₂ = 44.01 g/mol , 3 moles = 132 g.
Thus, mass of CO required to produce 635 g of CO₂ is :
= (84.03 × 635 g) /132 g = 404.23 g.
Therefore, the mass of CO required to produce 635 g of CO₂ is 404.23 g.
To find more on CO, refer here:
https://brainly.com/question/10193078
#SPJ1
which functional group is expected to be produced when cyclodecyne is reacted with disiamylborane, followed by treatment of basic hydrogen peroxide?
The functional group Ketone is expected to be produced when cyclodecyne is reacted with disiamylborane, followed by treatment of basic hydrogen peroxide.
The molecular formula of cyclodecyne is C₁₀H₁₆ and the molecular formula of disiamylborane is C₁₀H₂₃B.
Cyclodecyne is an alkyne and the reaction between cyclodecyne and disiamylborane is a reaction of hydroboration of alkynes.
Hydroboration is the process which involves the addition of a H-B bond between a C-C double or triple bond.
At first, in the reaction between cyclodecyne and disiamylborane, enol is formed as the product. On further treating it with basic hydrogen peroxide (H₂O₂) , enol gets converted into ketone.
Thus, ketone is the functional group produced in this reaction.
To know more about functional group here
https://brainly.com/question/15396073
#SPJ4
copper IV sulfide formula
Sulfur and copper combine to form the chemical compound copper (IV) sulphide (Cu2S). Cu2S, a chemical, is present.
What happens when CuSO4 and H2S combine?
When H2S gas is introduced to the blue CuSO4 solution, a black copper sulphide precipitate forms, and the sulphuric acid that was created stays in the solution. An illustration of is the response. a mixture reaction
What takes place when copper and H2S interact?
The surface of the copper rod will show signs of the purple-black copper sulphide product that results from the elemental copper reacting with hydrogen sulphide.
Learn more about Precipitation
Visit:
https://brainly.com/question/18109776
#SPJ1
1. In the equation CH4 + 2O2 ---> CO2 + 2H20, what is the coefficient in 2H20? How is the coefficient used?
2. In the equation CH4 + 2O2 ---> CO2 + 2H20, how is the coefficient in 2O2 used?
(Need answered Asap Please!! )
1. The coefficient in 2H2O means that there are 2 moles of that compound for every 1 mole of CH4 and CO2. If you had 1 mole of CH4 (and enough O2), you would produce 2 moles of H2O. The coefficients describe the ratio of moles in an equation.
2. It's the same for O2. There are 2 moles of O2 for every 1 mole of CH4. When reacting O2 with CH4, you need 2 moles of O2 (which is important if you need to know how much O2 to react with CH4).
identify which substance has the lowest vapor pressure at 25c and 1.00 atm external (atmospheric) pressure
The one having lowest vapour pressure at `25^C` is a : The vapour pressure of water is least because of strong intermolecular H-bonding in water molecules.
The pressure by a vapour when it is in equilibrium with a substance's liquid, solid, or both forms—i.e., when the conditions permit the substance to exist in both of these phases or in all three—is known as vapour pressure. The measurement of a substance's propensity to change into a gaseous or vapour state, vapour pressure increases with temperature. The temperature at which the pressure equals the vapour pressure existing at the liquid's surface is known as the boiling point of a liquid. When conditions allow for the creation of vapour inside a liquid, the process is referred to as boiling. It follows that the more molecules that evaporate at a given temperature, the higher the vapor pressure that results.
To learn more about vapor pressure,
https://brainly.com/question/26127294
#SPJ4
effective nuclear charge equals to the number of?
Answer:
The effective nuclear charge is the net positive charge experienced by valence electrons.
Explanation:
The effective nuclear charge is the net positive charge experienced by valence electrons.
It can be approximated by the equation: Zeff = Z – S
Zeff = the effective nuclear charge
Z = denotes the number of protons existing in the nucleus
S = average amount of density between the nucleus and the electron.
how would you design an experiment to find out if table salt woudl form precipitates with lead (ii) nirtate or silver nitrate
In order to design experiment we should initially know how the chemical will react with each other. When sodium chloride reacts with either of the chemicals following reactions takes place:
An inorganic substance having the chemical formula Pb(NO3)2 is lead(II) nitrate. In contrast to the majority of other lead(II) salts, it frequently appears as a colorless crystal or white powder and is soluble in water. Lead chloride and sodium nitrate precipitate are created when sodium chloride solution is introduced to a lead nitrate solution. Lead chloride precipitate is soluble in hot water but insoluble in cold water. If the initial concentrations of silver nitrate and sodium chloride are both quite high, there is a good possibility that the mixture of aqueous AgNO3 and aqueous NaCl compounds will produce a precipitate that is white in color. Therefore, the reaction between AgNO3 and NaCl is precipitation.
to know more about silver nitrate visit
https://brainly.com/question/29627918
#SPJ4
How many atoms are present in a mole of CaCO3 ?
- 2 × Na atoms
- 5 × 6.022x10²³ atoms
- 2 × 6.022x10²³ atoms
- 5 × NA atom
Hey!! Can you say the answer ??
Answer:
5 x 6.022 x 10²³ atoms
Explanation:
There are 5 different atoms that make up a CaCO3 molecule, and since one mole of something is 6.022 x 10²³, there are 5 times that amount of atoms.
what is the edge length of a body-centered cubic unit cell made up of atoms that each has a radius of 178 pm ?
The edge length of a body-centered cubic unit cell made up of atoms of radius 178 pm is 411.074 pm.
The body-centered cubic unit cell is defined as an unit cell that has atoms at each of the eight corners of a cube (like the cubic unit cell) plus one atom present in the center of the cube. Each of the corner of atoms is the corner of another cube so the corner atoms are shared among eight unit cells.
Length of body diagonal = r + 2r + r
= 4r
From the cube, body diagonal = √(3) a
∴ 4r = √(3) a
Where:
a: is the edge length
R: is the radius of each atom = 178 pm
By solving equation the equation for "a" we have:
a = 4r/√(3)
⇒ a = (4 × 178)/√(3)
⇒ a = 411.074 pm
Learn more about cubic unit cell from the link given below.
https://brainly.com/question/17157025
#SPJ4
Which characteristics would be present in an air mass that develops over the Caribbean Sea near the equator?
Which sentence is true of all Brønsted-Lowry bases?
A. They can donate a hydrogen ion.
B. They can accept a hydrogen ion.
C. They can produce hydronium.
D. They are positively charged.
E. They are negatively charged.
Considering the Brønsted-Lowry theory, the correct answer is option B. a base can accept a hydrogen ion.
Brønsted-Lowry theoryIn the Brønsted-Lowry theory, a proton transfer occurs that requires the presence of a proton donor, that is, an acid, and a base that accepts them. In this way, the acid-base reaction is one in which the acid transfers a proton to a base.
Then, according to the Brønsted-Lowry Theory, a base is a substance capable of accepting protons (H⁺) in solution, and an acid is any species capable of donating a proton (H⁺).
SummaryAccording to the Brønsted-Lowry Theory, a base can accept a hydrogen ion.
Learn more about Brønsted-Lowry theory:
brainly.com/question/11597189
brainly.com/question/26939233
brainly.com/question/21736327
brainly.com/question/24098522
#SPJ1
Which of these ions is more abundant in the interior of resting neuron that in the fluid surrounding the neuron?A. Cl-B. Ca++C. Na+D. K+
K+ ions is more abundant in the interior of resting neuron that in the fluid surrounding the neuron.
What is a Neuron?
A neuron is a type of cell that is found in the nervous system and is responsible for sending and receiving electrical signals. Neurons are the basic building blocks of the nervous system and are responsible for processing and transmitting information throughout the body.
In neurons, potassium(K) ions are maintained at high concentrations within the cell while sodium ions are maintained at high concentrations outside of the cell. The cell has potassium and sodium leakage channels, which allow the cations to diffuse down their concentration gradients.
Define Potassium?
Potassium is basically a chemical element with the symbol K and atomic number 19. It is a silvery-white, soft, and ductile metal that is part of the alkali metal group. Potassium is an essential mineral for the body, playing a role in muscle contractions, nerve transmission, and the maintenance of a healthy fluid balance. It is also necessary for building and maintaining strong bones.
Therefore, the correct option is Option D.
To know more about neurons,
https://brainly.com/question/13061744
#SPJ4
What is the correct formula for the product of the combination reaction between calcium metal and oxygen gas?.
Oxygen and calcium react to generate calcium oxide. The chemical made of calcium and oxygen has the formula CaO. This reaction's chemical formula is 2Ca + O2 2CaO.
What are the eight different kinds of chemical reactions?the eight types of chemical reactions that are most frequently encountered are: decomposition reaction, combination reaction, combustion reaction, single displacement reaction, double displacement reaction, precipitation reaction, and redox reaction.
What four traits do chemical reactions have?The evolution of a gas, precipitate formation, color change, temperature change, and state change are significant aspects.
Learn more about redox reaction here:
https://brainly.com/question/13293425
#SPJ4
1. Describe four ways in which enthalpy changes for a reaction may be represented.
2. Use the four methods to represent the dissolving of sodium chloride (Delta H sol = 3.9 kJ/mol).
Recall that we can utilize the equation q=nHfusion, where q will equal the reaction's total quantity of energy! Additionally, you might have the typical molar enthalpy of reaction Ex. ΔHofusion, the o represents that this standard value at a SATP (P=100kPa, T=25oC).
How is enthalpy displayed and what does it mean?The following definition of enthalpy H = E + PV. The internal energy and pressure multiplied by the volume make up enthalpy. The enthalpy of a system cannot be measured, although enthalpy variations can be observed.
What does the symbol used to denote enthalpy mean?Enthalpy, denoted by the symbol H, is the sum of the internal energy, denoted by E, and the product of the pressure and volume, denoted by PV.
To know more about enthalpy visit:-
https://brainly.com/question/13996238
#SPJ1
a 50g sample of copper is at 25 c. of 1200 j of heat energy is added to the copper, what is its final temperature
The final temperature in the given situation is 87.015C. Using the heat capacity relation (Q=m* c*delta T).The copper tube expands by 1.7 × 10–5 of its length for every 1.8 degrees Fahrenheit.
How to solve?Step 1: Given data-
1. Mass of copper m = 50g= 0.05kg
2. Heat energy added Q = 1200 J
3. Specific heat of copper Scopper 4. The initial temp. is 25°C -387 J kg °C 1
Step 2: Find the rise in temperature using heat capacity relation- Let, final temperature be T. Then using heat capacity relation we can,
Q= m*c* delta T
On substituting values we get,
12000.05 x 387 x (T-25)
T= 87.015°C
Hence, the final temperature in the given situation is 87.015°C.
What is the temperature of copper wire?Copper melts at 1083°C. It has absolutely nothing to do with Minimum and Maximum temperature for a copper wire to work as a conductor. Both are determined by insulation and jacket materials. Insulation breaks down, if ambient temperature goes < 100°C.
Learn more about energy on:
https://brainly.com/question/8630757
#SPJ4
What is the difference between changing a subscript in a chemical formula and changing a coefficient?.
Answer:
The chemical formula changes
Describe what happens at the molecular level when a substance is heated first to its melting point and then to its boiling point.
When one substance melts, we just seperate the molecules. Because the temperature required to change from solid to liquid is less than the temperature needed to change from liquid to gas.
What is Melting point?The melting point of a substance or compound is defined as the temperature at which it changes from solid state to liquid state. At the melting point, the solid and liquid state exist in the equilibrium stage. The melting point of the substance always depends on pressure.
What is Boiling point?The boiling point of a substance or compound is defined as the temperature at which it changes from liquid state to gaseous state. At the boiling point, the gas and liquid state exist in the equilibrium stage. The boiling point of the substance always depends on pressure.
As we know that,
When a substance is boiled, the molecules of that particular substance completely break.Thus, we concluded that when one substance melts, we just seprate the molecules. Because the temperature required to change from solid to liquid is less than the temperature needed to change from liquid to gas.
learn more about temperature:
https://brainly.com/question/23411503
#SPJ1
in each reaction box, place the best reagent and conditions from the list. each reagent will only be used once and not all reagents will be used.
The reagent is the substance in the chemical reaction used to identify and measure the other substance if it is present.
The reagent is used to perform the laboratory test. The reagent are used in the chemical reaction to identify the other substance if the another substance is present . A reagent is a compound or the mixture that is added to the system and to start the chemical reaction.
Reagent are very commonly used in the laboratories for the tests. the examples is : to convert the alcohol to aldehyde and ketones , the reagent is used is the Collins reagent.
The given question is incomplete, I answer the question general answer according to my knowledge.
To learn more about reagent here
https://brainly.com/question/10655661
#SPJ4
How many joules are required to change 25.02g of liquid Ethanol that is at a temperature of 289.14K to a gas at 351.5K
The amount of joules required to change 25.02g of liquid Ethanol is 3838.2 J or 3.83kJ.
Given,
mass of the ethanol (m) = 25.02g
heat capacity of the ethanol (c) = 2.46
Conversion of Kelvin to Celsius:
C = K - 273.15
C1 = 289.14 - 273.15 => 15.99 C
C2 = 351.5 - 273.15 => 78.35 C
Formula:
H = mcdT
temperature change (dT) = C2 -C1 => 78.35 - 15.99 => 62.36 C
Substituting the values,
H = 25.02 * 2.46 * 32.36
H = 3838.2 J or 3.83kJ
Therefore, the amount of joules required to change 25.02g of liquid Ethanol is 3838.2 J or 3.83kJ.
To know more about Specific Heat Capacity, please refer to the link below:
brainly.com/question/28728970