The different products obtained during electrolysis of molten and aqueous NaCl are due to the presence of water molecules and the resulting different reactions that occur at the electrodes.
The reason why different products are obtained when molten and aqueous NaCl is electrolyzed lies in the difference in the behavior of the ions present in these two forms of NaCl. When molten NaCl is electrolyzed, only the Na+ and Cl- ions are present, and these ions are free to move about in the molten state. Thus, both Na+ and Cl- ions are reduced and oxidized respectively at the electrodes, leading to the formation of metallic sodium and chlorine gas. On the other hand, when aqueous NaCl is electrolyzed, the Na+ and Cl- ions are surrounded by water molecules, which form a solvation shell around the ions, preventing them from moving freely. As a result, only the water molecules are electrolyzed, producing hydrogen gas at the cathode and oxygen gas at the anode. Thus, the different products obtained when molten and aqueous NaCl is electrolyzed are due to the presence or absence of water molecules that surround the ions and affect their behavior during electrolysis.
Learn more about NaCl here: brainly.com/question/1550455
#SPJ11
What happens to the market price that buyers face as a result of taxation?
Multiple Choice select which one it is and ill give u 35 point ;D
1. It is greater than before the tax was imposed.
2. It is less than before the tax was imposed.
3. Taxation has no effect on price, only output.
4. Taxation affects average cost only.
Answer:
2) It is less than before the tax was imposed.
A portion of the tax that is levied on a commodity must be paid by the seller, which lowers their profit margin. Sellers will raise the cost of the good and pass this cost onto purchasers in order to preserve their profit. This causes the market price that buyers must pay to rise as a result of taxation.
Which of the labeled groups in compound A is the best leaving group? Which of the labeled groups is the worst leaving group? HNYÖ :OH Which option correctly ranks the marked groups from best to worst leaving group? 0 O –OH,*>—OH——NH, -NH, >-OH-OH, -OH, >-NH, > -OH -OH >–NH, >-OH -OH -OH2>-NH,
In compound A, the best leaving group is the O –OH group, and the worst leaving group is the –OH group.
The correct ranking from best to worst leaving group is O –OH, > –NH, > –OH.
To explain this step-by-step:
1. A good leaving group is one that can easily dissociate from the molecule, stabilizing the negative charge it acquires upon leaving.
2. The O –OH group, being an alkoxide ion, is a better leaving group because it can stabilize the negative charge through resonance.
3. The –NH group is the next best leaving group, as it can somewhat stabilize the negative charge through its lone pair of electrons.
4. Finally, the –OH group is the worst leaving group among the given options, as it is less capable of stabilizing the negative charge upon leaving the molecule.
Know more about leaving group - brainly.com/question/30640450
SPJ11
The table lists the specific heat values for brick, ethanol, and wood.Specific Heats of SubstancesSubstanceBrickEthanolWoodSpecific Heat (cal/g.°c)0.200.580.10Calculate the amount of heat, in calories, that must be added to warm 14.9 g of brick from 21.4 °C to 47.4 °C. Assume nochanges in state occur during this change in temperature.heat added: 165.308
Therefore, it takes 165.308 calories of heat to warm 14.9 g of brick from 21.4 °C to 47 °C.
What is a substance's specific heat?The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat.
Using the following calculation, we can determine how much heat is needed to raise 14.9 g of brick from 21.4 to 47.4 degrees Celsius:
q = m * c * ΔT
where q is the required quantity of heat, m is the substance's mass, c is its specific heat, and T is the temperature change.
Brick has a specific heat of 0.20 cal/g.°C, so when the given values are substituted, we obtain:
q = 14.9 g * 0.20 cal/g.°C * (47.4°C - 21.4°C)
q = 14.9 g * 0.20 cal/g.°C * 26°C
q = 165.308 cal
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
Therefore, it takes 165.308 calories of heat to warm 14.9 g of brick from 21.4 °C to 47 °C.
What is a substance's specific heat?The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat.
Using the following calculation, we can determine how much heat is needed to raise 14.9 g of brick from 21.4 to 47.4 degrees Celsius:
q = m * c * ΔT
where q is the required quantity of heat, m is the substance's mass, c is its specific heat, and T is the temperature change.
Brick has a specific heat of 0.20 cal/g.°C, so when the given values are substituted, we obtain:
q = 14.9 g * 0.20 cal/g.°C * (47.4°C - 21.4°C)
q = 14.9 g * 0.20 cal/g.°C * 26°C
q = 165.308 cal
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
calculate the theoretical yield nacl if you mix 2.00g of na2co3
The theoretical yield of NaCl when you mix 2.00g of Na2CO3 is 2.21g. Use the balanced equation's stoichiometry to determine the NaCl moles produced. To calculate the theoretical yield of NaCl when mixing 2.00g of Na2CO3, we need to first consider the balanced chemical equation for the reaction between Na2CO3 and HCl:
Na2CO3 + 2HCl -> 2NaCl + CO2 + H2O
This equation shows that one mole of Na2CO3 reacts with two moles of HCl to produce two moles of NaCl. We can use this information to calculate the theoretical yield of NaCl by following these steps:
1. Convert 2.00g of Na2CO3 to moles by dividing by its molar mass (105.99 g/mol).
2. Use stoichiometry to determine the moles of NaCl produced. Since the reaction produces two moles of NaCl for every mole of Na2CO3, we can multiply the moles of Na2CO3 by 2 to get the moles of NaCl.
3. Convert the moles of NaCl to grams by multiplying by its molar mass (58.44 g/mol).
The calculation looks like this:
2.00g Na2CO3 x (1 mol Na2CO3/105.99 g Na2CO3) x (2 mol NaCl/1 mol Na2CO3) x (58.44 g NaCl/1 mol NaCl) = 2.78g NaCl (theoretical yield)
Therefore, the theoretical yield of NaCl when mixing 2.00g of Na2CO3 is 2.78g.
Learn more about NaCl here:
https://brainly.com/question/18248731
#SPJ11
When an action potential reaches a neuromuscular junction, it causes acetylcholine to be released into this synapse. The acetylcholine binds to the nicotinic receptors concentrated on the motor end plate, a specialized area of the muscle fibre's post-synaptic membrane.
When an action potential reaches a neuromuscular junction, it triggers the release of acetylcholine into the synaptic cleft.
The acetylcholine then binds to the nicotinic receptors, which are concentrated on the motor end plate of the muscle fiber's post-synaptic membrane. This binding causes the opening of ion channels and the influx of positively charged ions, which results in depolarization of the muscle fiber's membrane. This depolarization then spreads through the muscle fiber, ultimately leading to muscle contraction. The action of acetylcholine at the neuromuscular junction is critical for normal muscle function and is targeted by many drugs used to treat neuromuscular disorders.
Learn more about depolarization :
https://brainly.com/question/29698882
#SPJ11
Draw an arrow pushing mechanism for the formation of the acylium ion when acetic anhydride reacts with phosphoric acid
a. True
b. False
The statement "Draw an arrow pushing mechanism for the formation of the acylium ion when acetic anhydride reacts with phosphoric acid" is true.
To draw an arrow pushing mechanism for the formation of the acylium ion when acetic anhydride reacts with phosphoric acid, follow these steps:
1. Draw the structures of acetic anhydride and phosphoric acid.
2. Locate the electrophilic carbonyl carbon in acetic anhydride and the nucleophilic oxygen atom in phosphoric acid.
3. Draw an arrow from the lone pair of electrons on the oxygen atom of phosphoric acid to the electrophilic carbonyl carbon in acetic anhydride, indicating nucleophilic attack.
4. Draw an arrow from the pi bond between the carbonyl carbon and oxygen in acetic anhydride to the carbonyl oxygen, representing the movement of electrons and formation of a negatively charged oxygen atom.
5. Draw the intermediate structure formed after the nucleophilic attack.
6. Draw an arrow from the negatively charged oxygen atom to reform the carbonyl double bond and simultaneously break the carbon-oxygen bond adjacent to the carbonyl carbon, pushing electrons to the neighboring oxygen atom.
7. Draw the final acylium ion and byproduct formed in the reaction.
This mechanism illustrates how the acylium ion is formed when acetic anhydride reacts with phosphoric acid.
To know more about nucleophilic attack click on below link:
https://brainly.com/question/31565738#
#SPJ11
In a Nickel (II) Complexes: Linkage Isomers and others Lab
a. What is an ambidentate ligand? Give two examples (other than NO2). Show how the two ligands that you listed and NO2 can bind to a metal ion (M). give the IUPAC name for each of the ligands that you listed.
b. What is an polydentate ligand? Draw the structure of two examples and include the molecular formula. Describe the chelate effect including how it lowers the overall energy of a comples. Give the IUPAC name for each of the ligands that you listed
An ambidentate ligand is a ligand that can bind to a metal ion (M) through two different donor atoms.
Two examples of ambidentate ligands (other than NO₂) are SCN⁻ and NCS⁻. SCN⁻ can bind through the sulfur atom (S) or the nitrogen atom (N), forming [M-SCN] or [M-NCS] complexes. The IUPAC names for these ligands are thiocyanato (SCN⁻) and isothiocyanato (NCS⁻).
A polydentate ligand is a ligand that can bind to a metal ion (M) through multiple donor atoms simultaneously. Two examples are ethylenediamine (en) and ethylenediaminetetraacetic acid (EDTA).
The chelate effect occurs when a polydentate ligand forms a ring with a metal ion, which stabilizes the complex and lowers its overall energy. The IUPAC names for these ligands are ethane-1,2-diamine (en) and (ethylenedinitrilo)tetraacetate (EDTA).
To know more about ambidentate ligand click on below link:
https://brainly.com/question/31499203#
#SPJ11
pOH of 5.039 e-3 M solution of calcium hydroxide
Explanation:
pH+pOH=14
pH=14-pOH
=14-5.039e-3
=13.9
which choice is greener in a chemical process? a reaction that can be run at 300 k for 1 hour with a catalyst a reaction that can be run at 350 kk for 12 hours without a catalyst
The greener choice in a chemical process between a reaction that can be run at 300 K for 1 hour with a catalyst (Option A).
In terms of green chemistry, the reaction that can be run at 300 K for 1 hour with a catalyst is the greener choice. This is because using a catalyst can increase the reaction rate and efficiency, thus reducing the amount of energy and resources needed to run the reaction. Additionally, running the reaction at a lower temperature can reduce energy consumption and decrease the carbon footprint of the process. Overall, using a catalyst and optimizing reaction conditions for efficiency and sustainability is a key aspect of green chemistry.
Learn more about green chemistry: https://brainly.com/question/13254083
#SPJ11
use the diluted equation to determine the concentration of allura red in the undiluted unknown
The concentration of Allura Red in the undiluted unknown is 0.00556 mg/mL.
Explain the concentration of Allura Red ?To determine the concentration of Allura Red in the undiluted unknown, we can use the diluted equation, which relates the concentration of the diluted solution with the concentration of the undiluted solution, as well as the dilution factor:
C1V1 = C2V2
where:
C1 is the concentration of the undiluted solution (what we want to find)
V1 is the volume of the undiluted solution
C2 is the concentration of the diluted solution (known)
V2 is the volume of the diluted solution (known)
the dilution factor is V1/V2
Assuming we know the concentration and volume of the diluted solution, as well as the dilution factor, we can rearrange the diluted equation to solve for the concentration of the undiluted solution:
C1 = C2 x V2/V1
Let's say we have a diluted solution of Allura Red with a concentration of 0.05 mg/mL and a volume of 10 mL, and we diluted it 1:10 (meaning we added 90 mL of solvent to make a total volume of 100 mL). We can use the diluted equation to calculate the concentration of Allura Red in the undiluted solution:
C1 = 0.05 mg/mL x 10 mL / 90 mL
C1 = 0.00556 mg/mL
Therefore, the concentration of Allura Red in the undiluted unknown is 0.00556 mg/mL.
Learn more about Allura Red
brainly.com/question/17514362
#SPJ11
what is an ambidentate ligand? give two examples (other than no2)
An ambidentate ligand is a type of ligand that can bond through two different atoms or groups in the same molecule.
How does an ambidentate ligand bond?An ambidentate ligand is a ligand that can bind to a central metal atom/ion through two different donor atoms present within the same molecule, but only one donor atom can bind at a time. This means that it can bond to a metal ion through either of these two atoms or groups. Two examples of ambidentate ligands, other than NO2, are:
1. SCN- (thiocyanate): This ligand can bind to the metal through either the sulfur (S) or the nitrogen (N) atom.
2. OCN- (cyanate): This ligand can bind to the metal through either the oxygen (O) or the nitrogen (N) atom.
To know more about Ligands:
https://brainly.com/question/13151575
#SPJ11
White phosphorus is one of several forms of phosphorus and exists as a waxy solid consisting of P4 molecules. How many atoms are present in 0.350mol of P4? Answer should be in scientific notation.
The molar mass of P4 is 4 times the molar mass of a single phosphorus atom, which is approximately 30.974 g/mol. Therefore, the molar mass of P4 is: there are 8.41 x [tex]10^{23}[/tex] phosphorus atoms present in 0.350 mol of P4.
4 x 30.974 g/mol = 123.896 g/mol
To calculate the number of moles of P4 in 0.350 mol, we can use the following equation:
moles = mass / molar mass
mass = moles x molar mass
mass of P4 = 0.350 mol x 123.896 g/mol = 43.3676 g
Since each P4 molecule contains 4 phosphorus atoms, we can calculate the total number of phosphorus atoms in 0.350 mol of P4 as follows:
number of P atoms = number of P4 molecules x 4
number of P atoms = 0.350 mol x 6.022 x 10^23 molecules/mol x 4 atoms/molecule
number of P atoms = 8.41 x [tex]10^{23}[/tex] atoms
Therefore, there are 8.41 x [tex]10^{23}[/tex] phosphorus atoms present in 0.350 mol of P4.
Learn more about phosphorus atom
https://brainly.com/question/13422388
#SPJ4
instrumentation changes as science progresses, comments on it.
As scientific knowledge and technology advance, instrumentation also changes and evolves to better support scientific research and experimentation.
What is Science?
Science is a systematic and evidence-based approach to studying the natural world, including physical, biological, and social phenomena. It involves formulating hypotheses, conducting experiments, and analyzing data to generate knowledge and understanding about how the world works.
Advances in fields such as materials science, electronics, and computing have allowed for the development of more sophisticated and precise instruments, leading to new discoveries and greater understanding of the natural world.
Learn more about Science from the given link
https://brainly.com/question/18186842
#SPJ1
The standard enthalpy change for the following reaction is 656 kJ at 298 K.
2 KI(s) 2 K(s) + I2(s) ΔH° = 656 kJ
What is the standard enthalpy change for this reaction at 298 K? K(s) + 1/2 I2(s) KI(s)
_____kJ
The standard enthalpy change for the reverse reaction is the negative of the given enthalpy change. Therefore, the standard enthalpy change for the reaction K(s) + 1/2 I2(s) → KI(s) is -656 kJ at 328K.
To find the standard enthalpy change for the given reaction at 298 K, we can manipulate the original reaction and divide its enthalpy change by 2.
The original reaction is:
2 KI(s) → 2 K(s) + I2(s) ΔH° = 656 kJ
Divide the entire reaction by 2:
KI(s) → K(s) + 1/2 I2(s)
Now, divide the enthalpy change by 2:
ΔH° = 656 kJ / 2 = 328 kJ
So, the standard enthalpy change for the reaction K(s) + 1/2 I2(s) → KI(s) at 298 K is 328 kJ.
To learn more about standard enthalpy click here
brainly.com/question/29556033
#SPJ11
2. CuCO3 is a sparingly soluble salt with a Ksp of 2.30x10-10. The addition of NH3(aq) to CuCO3(s) yields the complex ion [Cu(NH3)4]2+(aq) with a Kf of 1.07x1012. a. Write out the overall reaction below. Calculate the Keg for this overall reaction. b. What is the molar solubility of CuCO3 (s) in a solution with the equilibrium (NH3] = 0.2 M? c. The complex ion [Cu(en)2]2+(aq) has a Kf of 9.77x1019. Why does ethylene diamine (en) have a much large Kf than ammonia when forming a complex ion with metal cations?
The Keg for the overall reaction is [tex]2.01 x 10^21[/tex]. Once the concentration of ammonia (aq) in the solution has been determined, the equilibrium constant Keg for the entire process can be computed using equation.
How does concentration affect the equilibrium constant?Temperature-dependent The quantity of a reaction, the presence of a catalyst, or the presence of inert materials have no impact on equilibrium constants. It is also unaffected by the amounts, pressures, or concentrations of the reactants. The equilibrium constant's degree of temperature dependence is, in general, determined by the reaction.
What factors affect the equilibrium constant KC?The equilibrium constant is temperature-dependent and unaffected by the precise ratios of reactants to products, the presence of a catalyst, or the presence of inert substances. The volumes, pressures, and concentrations of the reactants and products have no impact on it either.
To know more about ammonia visit:-
https://brainly.com/question/14672082
#SPJ1
throughout this lab the starting material and product are called by their common names, tert-butyl alcohol to tert-butyl chloride, respectively. what are their proper iupac names?
The proper IUPAC names of tert-Butyl alcohol is 2-methylpropan-2-ol and of tert-Butyl chloride is 2-chloro-2-methylpropane.
The common names, tert-butyl alcohol and tert-butyl chloride, can be represented by their proper IUPAC names as follows:
1. tert-Butyl alcohol, also known as tert-butanol, has the IUPAC name 2-methylpropan-2-ol. This name is derived from its structure, where a methyl group (CH3) is attached to the second carbon of a three-carbon chain (propane). The alcohol functional group (-OH) is also attached to the second carbon, hence the "-2-ol" suffix.
2. tert-Butyl chloride, also known as tert-butylchloride or t-BuCl, has the IUPAC name 2-chloro-2-methylpropane. Similar to the alcohol, its structure consists of a methyl group (CH3) attached to the second carbon of a three-carbon chain (propane). Instead of an alcohol functional group, there is a chlorine atom (Cl) attached to the same second carbon, hence the "2-chloro" prefix in the name.
These IUPAC names provide a more systematic and descriptive way to identify the chemical structures of these compounds compared to their common names.
For more such questions on IUPAC names.
https://brainly.com/question/30086566#
#SPJ11
point Intestinal cells absorb glucose via active transport. What would happen if all the mitochondria within these intestinal cells were destroyed? Glucose absorption would decrease. Glucose absorption would be slow at first and then increase The cells would switch to sucrose Glucose absorption would increase. Glucose absorption would not be affected.
If all the mitochondria within intestinal cells were destroyed, glucose absorption would decrease.
If all the mitochondria within the intestinal cells were destroyed, glucose absorption would decrease due to the lack of ATP production. Active transport is responsible for the absorption of glucose in intestinal cells, and this process requires energy in the form of ATP. Mitochondria are the main organelles responsible for ATP production in cells, and without them, the energy supply for active transport would be insufficient. This would lead to a decrease in glucose absorption by the intestinal cells. Since glucose is an important source of energy for the body, reduced glucose absorption can have negative consequences on the overall health and well-being of an individual.
Know more about Mitochondria here:
https://brainly.com/question/31485307
#SPJ11
Which of the following reactiond of alkenes takes place with syn stereospecificity? a. Addition of HBr b. Acid catalyzed hydration (H2O/H2SO4) c. Addition of bromine (Br2) d. Hydrogenation (H2/Pt)
The addition of hydrogen (H2/Pt) to alkenes takes place with syn stereospecificity, meaning that the two hydrogen atoms are added to the same side of the double bond. Therefore, the correct answer is d. Hydrogenation (H2/Pt).
The other reactions listed do not have stereospecificity:a. Addition of HBr results in the formation of both the syn and anti addition products, meaning that the H and Br can add to either the same side or opposite sides of the double bond.b. Acid-catalyzed hydration (H2O/H2SO4) also does not have stereospecificity because the water molecule can add to either side of the double bond, leading to the formation of both the syn and anti addition products.
c. Addition of bromine (Br2) also does not have stereospecificity, as the two Br atoms can add to either side of the double bond, leading to the formation of both the syn and anti addition products.
Learn more about alkenes here:https://brainly.com/question/29120960
#SPJ11
Magnesium metal is produced by passing an electrical current through molten MgCl2. The reaction at the cathode isMg^2(l) + 2e ---->Mg(i)How many grams of magnesium metal are produced if an average current of 65.7 A flows for 4.50 hr? Assume all of the current is consumed by the half-reaction shown.
There are created around 125.8 grammes of magnesium metal.
How does electrolysis work to remove magnesium?By running electricity through molten magnesium chloride, magnesium metal may be produced. At the cathode, magnesium metal is produced, and at the anode, chlorine gas is developed. Therefore, the appropriate metal is formed at the cathode during the electrolytic reduction of molten salts (the negative electrode).
moles of substance = (electric charge in coulombs) / (Faraday's constant)
where Faraday's constant is the amount of electric charge carried by one mole of electrons, which is 96,485 C/mol.
electric charge = current x time = 65.7 A x 4.50 hr x 3600 s/hr = 1.00 x 10⁶ C
Next, we can calculate the moles of magnesium produced:
moles of Mg = electric charge / (Faraday's constant x 2)
(we divide by 2 because the balanced equation shows that 2 electrons are required to produce 1 mole of Mg)
moles of Mg = 1.00 x 10⁶ C / (96,485 C/mol x 2) = 5.18 mol
Finally, we can calculate the mass of magnesium produced using its molar mass, which is 24.31 g/mol:
mass of Mg = moles of Mg x molar mass of Mg
mass of Mg = 5.18 mol x 24.31 g/mol = 125.8 g
To know more about magnesium visit:-
https://brainly.com/question/1533548
#SPJ1
Determine whether HI can dissolve each metal sample. If it can, write a balanced chemical reaction showing how the metal dissolves in HI and determine the minimum volume of 3.5MHI required to completely dissolve the sample.
a. 2.15gAl.
b. 4.85gCu.
c. 2.42gAg.
A minimum of 25.6 mL of 3.5 M HI is needed to thoroughly dissolve 2.42 g of silver.
Which metals will HCl dissolve?The less active metals, including zinc and magnesium, are easily dissolved by hydrochloric acid. Iron, copper, and other harder metals are less easily or completely disintegrated by it. While hydrochloric acid won't dissolve some metals, other chemicals, such nitric acid, will.
The chemical equation for the reaction of copper with HI is balanced as follows:
Cu(s) + 2HI(aq) → CuI2(aq) + H2(g)
The following formula can be used to determine the minimum volume of 3.5 M HI needed to completely dissolve 4.85 g Cu:
Moles of Cu = 4.85 g / 63.55 g/mol = 0.0763 mol
Moles of HI required = 2 × moles of Cu = 0.1526 mol
Volume of 3.5 M HI required = moles of HI required / 3.5 M = 0.0436 L or 43.6 mL
Therefore, 43.6 mL of 3.5 M HI is the lowest amount needed to thoroughly dissolve 4.85 g of copper. The chemical equation for the silver-HI reaction is balanced as follows:
2Ag(s) + 4HI(aq) → 2AgI(s) + 2H2(g)
The following formula can be used to determine the minimum volume of 3.5 M HI needed to completely dissolve 2.42 g of Ag:
Moles of Ag = 2.42 g / 107.87 g/mol = 0.0224 mol
Moles of HI required = 4 × moles of Ag = 0.0896 mol
Volume of 3.5 M HI required = moles of HI required / 3.5 M = 0.0256 L or 25.6 mL
To know more about silver visit:-
https://brainly.com/question/6434391
#SPJ1
to make sweet tea, a cook dissolved 152.395 grams of sugar (c6h6o2, fw = 110 g/mol) in 5.19 l of water at 32.34 °c. what is the molality of this sugar solution?
To make sweet tea, a cook dissolved 152.395 grams of sugar in 5.19 l of water at 32.34 °c. The molality of this sugar solution 0.275 mol/kg
To find the molality of the sugar solution, we need to first calculate the moles of sugar and the mass of solvent (water) in kilograms:
We know that molar mass of sugar= 110 g/mol
Moles of sugar = Mass of sugar / Molecular weight of sugar
Moles of sugar = 152.395 g / 110 g/mol
Moles of sugar = 1.385 mol
Mass of solvent (water) = Volume of solution - Mass of solute (sugar)
Mass of solvent (water) = 5.19 L - 0.146739 kg (since density of water is approximately 1 kg/L)
Now we can calculate the molality:
Molality = Moles of solute / Mass of solvent (in kg)
Molality = 1.385 mol / 5.043261 kg
Molality = 0.275 mol/kg
To know more about molality here
https://brainly.com/question/29175852
#SPJ4
Write the balanced NET ionic equation for the reaction when aqueous (NH₄)₃PO₄ and aqueous Zn(NO₃)₂ are mixed in solution to form solid Zn₃(PO₄)₂ and aqueous NH₄NO₃. Be sure to include the proper phases for all species within the reaction.
2 NH₄⁺(aq) + 3 Zn²⁺(aq) + 2 PO₄³⁻(aq) → Zn₃(PO₄)₂(s) + 6 NH₄⁺(aq) is the net ionic equation.
The balanced net ionic equation for the reaction when aqueous (NH₄)₃PO₄ and aqueous Zn(NO₃)₂ are mixed in solution to form solid Zn₃(PO₄)₂ and aqueous NH₄NO₃ is:
2 NH₄⁺(aq) + 3 Zn²⁺(aq) + 2 PO₄³⁻(aq) → Zn₃(PO₄)₂(s) + 6 NH₄⁺(aq)
The nitrate ions (NO₃⁻) do not participate in the reaction and are therefore not included in the net ionic equation. Additionally, the ammonium ions (NH₄⁺) are spectator ions and are therefore also not included in the net ionic equation.
Therefore, The phases for each species in the equation are:
NH₄⁺(aq) - ammonium ion, aqueous
Zn²⁺(aq) - zinc ion, aqueous
PO₄³⁻(aq) - phosphate ion, aqueous
Zn₃(PO₄)₂(s) - zinc phosphate, solid
NH₄⁺(aq) - ammonium ion, aqueous
To know more about Net Ionic equation refer here :
brainly.com/question/13879496
#SPJ11
1. The following figure represent a type of flame used in the laboratory. (a) Explain how the brightness of the flame can be increased.
The ways that the brightness of the flame can be increased are shown below.
How can the brightness of a laboratory flame be increased?By boosting the airflow into the burner, the flame's brilliance can be improved. Increasing the gas flow rate or changing the air intake valve can do this.
Using a gas that generates a brighter flame, like propane or butane, will increase the brightness of the flame. These gases produce a yellow flame because they have a higher carbon to hydrogen ratio than natural gas.
Learn more about laboratory flame:https://brainly.com/question/9018811
#SPJ1
0.20 mol A, 0.60 mol B, and 0.75 mol C are reacted according to the following reactionA + 2B + 3C → 2D + EIdentify the limiting reactant(s) in this scenario.A. A onlyB. C onlyC. B and C onlyD. A, B, and CE. B only
Comparing the amounts of product produced, we can see that reactant B produces the least amount of product (0.30 mol of D), while reactants A and C produce more than that. Therefore, reactant B is the limiting reactant in this scenario.
To determine the limiting reactant, we need to compare the amount of each reactant to the stoichiometric coefficients in the balanced equation. The reactant that produces the least amount of product, or runs out first, is the limiting reactant.
Let's start by calculating the amount of product that each reactant can produce:
For reactant A:
- 0.20 mol A produces 2 × 0.20 mol = 0.40 mol of D
- 0.20 mol A produces 1 × 0.20 mol = 0.20 mol of E
For reactant B:
- 0.60 mol B produces 1/2 × 0.60 mol = 0.30 mol of D
- 0.60 mol B produces 1/3 × 0.60 mol = 0.20 mol of E
For reactant C:
- 0.75 mol C produces 1/3 × 0.75 mol = 0.25 mol of D
- 0.75 mol C produces 1/3 × 0.75 mol = 0.25 mol of E
The limiting reactant is the one that produces the least amount of product. Comparing the amounts of product produced, we can see that reactant B produces the least amount of product (0.30 mol of D), while reactants A and C produce more than that. Therefore, reactant B is the limiting reactant in this scenario.
So the answer is (E) B only.
Visit to know more about Limiting reactant:-
brainly.com/question/14222359
#SPJ11
determine the most effective buffer made by hno2 and nano2 has a ph of 3.15. ka of hno2 is 7.110−4
To determine the most effective buffer made by HNO2 and NaNO2 with a pH of 3.15, we need to calculate the ratio of the concentrations of the conjugate acid-base pair (HNO2 and NO2-) that will give the desired pH.
The pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
Substituting the given values:
pH = -log(7.11 x 10^-4) + log([NO2-]/[HNO2])
3.15 = 3.15 + log([NO2-]/[HNO2])
log([NO2-]/[HNO2]) = 0
[NO2-]/[HNO2] = 1
Therefore, the most effective buffer will be made by mixing HNO2 and NaNO2 in a 1:1 molar ratio. This will give a pH of 3.15 and will be able to resist changes in pH when small amounts of acid or base are added to the solution.
Learn more about buffer here:
https://brainly.com/question/22821585
#SPJ11
why does acetyl chloride react with water almost violently, but you had to warm and shake the mixture of water and benzoyl chloride?
The reason why acetyl chloride reacts with water almost violently, but you have to warm and shake the mixture of water and benzoyl chloride is due to the difference in their reactivity and molecular structure.
Acetyl chloride (CH3COCl) is a more reactive compound than benzoyl chloride (C6H5COCl). This higher reactivity is due to the presence of an electron-donating methyl group (CH3) in acetyl chloride, which increases the electrophilicity of the carbonyl carbon (C=O) and makes it more susceptible to nucleophilic attack by water.
On the other hand, benzoyl chloride has an electron-withdrawing phenyl group (C6H5), which reduces the electrophilicity of the carbonyl carbon, making it less reactive towards nucleophilic attack by water.
As a result, acetyl chloride reacts with water almost violently, forming acetic acid (CH3COOH) and hydrogen chloride (HCl) gas. In contrast, benzoyl chloride requires warming and shaking to facilitate the reaction with water, ultimately producing benzoic acid (C6H5COOH) and hydrogen chloride (HCl) gas.
To know more about acetyl chloride- https://brainly.com/question/28166738
#SPJ11
tetrodotoxin acts by blocking sodium channels. how does it lead to a loss of excitatory conduction in neurons?
Tetrodotoxin blocks sodium channels, which prevents the influx of sodium ions and inhibits the generation and propagation of action potentials, leading to a loss of excitatory conduction in neurons.
Sodium channels are responsible for the rapid depolarization phase of the action potential in neurons. When an action potential is initiated, voltage-gated sodium channels open and allow an influx of sodium ions into the neuron, which depolarizes the membrane potential and triggers the propagation of the action potential down the axon.
Tetrodotoxin works by binding to the extracellular pore of the sodium channel and blocking the flow of sodium ions through the channel. This prevents the rapid depolarization of the membrane potential, which is necessary for the generation of action potentials. As a result, neurons are unable to generate action potentials and their ability to conduct electrical impulses is greatly diminished.
In summary, tetrodotoxin inhibits excitatory conduction in neurons by blocking sodium channels and preventing the generation and propagation of action potentials. This can lead to a range of neurological symptoms, including muscle weakness, paralysis, and respiratory failure, and can be fatal in high enough doses.
learn more about Tetrodotoxin here:
https://brainly.com/question/12222951
#SPJ11
identify the element in period 3 with the following successive ionization energies (ies) in kj/mol. input the symbol of the element. ie1 = 578 ie2 =1820 ie3 = 2740 ie4 =11,500 ie5 =13,000
The element in period 3 with successive ionization energies (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000) is Magnesium (Mg).
The very minimum energy required to remove one electron from a gaseous atom in isolation is referred to as ionization energy. Because these atoms are more stable and have orbitals that are partially and completely occupied, it takes more energy to remove an electron from them. In the case of such atoms, the ionization enthalpy is thus larger than the expected value.
To identify the element in period 3 with the successive ionization energies (IEs) in kJ/mol (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000), we need to follow these steps:
1. Locate the period 3 elements on the periodic table. Period 3 elements are those in the third row, and they include Na, Mg, Al, Si, P, S, and Cl.
2. Compare the given ionization energies with the known ionization energies of the period 3 elements.
After comparing the given ionization energies with the known values, we can identify the element as Magnesium (Mg).
The element in period 3 with successive ionization energies (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000) is Magnesium (Mg).
To learn more about ionization energies, visit: https://brainly.com/question/31192717
#SPJ11
1. a solution that is 7.5×10−2 M in trimethylamine, (CH3)3N, and 0.13 M in trimethylammonium chloride, (CH3)3NHCl
A buffer contains 0.19 mol of propionic acid
(C2H3COOH) and 0.20 mol of sodium
propionate (C2H, COONa) in 1.20 L.
What is the pH of the buffer after the addition of 0.02 mol of NaOH?
What is the pH of the buffer after the addition of 0.02 mol of HI?
As a buffer, ammonium acetate in water can be used. Ammonium acetate is a salt solution that can function as a buffer by itself.
As we now know, p K a =−logK a K a =1.34 x 10 -5 (Given) pK a =log(1.34 x 10 - 5) pK a =5 x 0.127 =4.873 pH is now calculated as pH=pK a + log( [acid] [salt] )
Given:- [salt]=[acid]=0.5M ∴pH=4.87+log
0.5 0.5=4.873
As a result, the solution's pH is 4.873.
Drive Me Tile Online has a concentration of 0.075 and Try Metal Ammonium Chloride has a concentration of 0.13 M I.
To know more about ammonium, click here:
https://brainly.com/question/10834028
#SPJ4
a 76.0 ml volume of 0.25 m hbr is titrated with 0.50 m koh . calculate the ph after addition of 38.0 ml of koh at 25 ∘c . express the ph numerically.
The pH after the addition of 38.0 mL of 0.50 M KOH to the 76.0 mL of 0.25 M HBr is 7.
To find the pH after the addition of 38.0 mL of 0.50 M KOH to the 76.0 mL of 0.25 M HBr:
1. Calculate the moles of HBr and KOH before the reaction.
2. Determine the limiting reactant and the remaining moles of the excess reactant.
3. Calculate the concentration of the remaining reactant.
4. Determine the pH using the concentration of the remaining reactant.
Calculate moles of HBr and KOH
Moles of HBr = volume (L) × concentration (M)
Moles of HBr = 0.076 L × 0.25 M = 0.019 moles
Moles of KOH = volume (L) × concentration (M)
Moles of KOH = 0.038 L × 0.50 M = 0.019 moles
Determine the limiting reactant
In this case, both HBr and KOH have the same moles (0.019 moles), so they will react completely with each other, leaving no excess reactant.
Calculate the concentration of the remaining reactant
Since both reactants have been completely consumed in the reaction, there are no remaining reactants. The reaction produces the salt KBr and water.
Determine the pH
As there are no remaining acidic or basic reactants in the solution, the pH of the resulting solution is neutral, with a pH of 7.
Therefore, 7 is the pH after the addition of 38.0 mL of 0.50 M KOH to the 76.0 mL of 0.25 M HBr.
More on pH: https://brainly.com/question/31419630
#SPJ11