Who won Miami Dolphins or Las Vegas raiders

Answer:

The following factors could be responsible for size of an Impact Crater:

Hope it helps!<3

Answer:

It is one of the strongest materials in the world and can hold anything

Answer:

The minimum speed needed at the top of the circle so that the cord remains tensioned and the ball's path remains circular is approximately is 9.903 meters per second.

Explanation:

By the Principle of Energy Conservation we understand that the minimum speed needed by the ball is that speed such that maximum height reached is equal to the diameter of the vertical circle, that is:

[tex]K =U_{g}[/tex] (1)

Where:

[tex]K[/tex] - Translational kinetic energy, measured in joules.

[tex]U_{g}[/tex] - Gravitational potential energy, measured in joules.

By definitions of translational kinetic and gravitational potential energies, we expand the equation above and clear the initial speed of the ball:

[tex]\frac{1}{2}\cdot m \cdot v^{2} = m\cdot g\cdot h[/tex]

[tex]v = \sqrt{2\cdot g\cdot h}[/tex] (2)

Where:

[tex]m[/tex] - Mass, measured in kilograms.

[tex]v[/tex] - Initial speed, measured in meters per second.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]h[/tex] - Maximum height of the ball, measured in meters.

If we know that [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]h = 5\,m[/tex], then the initial speed of the ball is:

[tex]v = \sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (5\,m)}[/tex]

[tex]v\approx 9.903\,\frac{m}{s}[/tex]

The minimum speed needed at the top of the circle so that the cord remains tensioned and the ball's path remains circular is approximately is 9.903 meters per second.

Answer:

v = 0.33 [m/s]

Explanation:

We must remember that speed is defined as the relationship between the displacement in a given time. In this way, we can propose the following equation.

[tex]v=d/t[/tex]

where:

v = velocity [m/s]

d = displacement = 40 [m]

t = 2 [min] = 120 [s]

Now replacing we have:

[tex]v=40/120\\v=0.33[m/s][/tex]

First we calculate the acceleration of the cart:

a = (v₂ - v₁) / (t)

a = (7 m/s - 3 m/s) / (8 s)

a = 4 m/s / 8 s

a = 0.5 m/s²

Using the Newtons Second Law:

F = m×a

F = (10 kg)(0.5 m/s²)

F = 5 N

Answer:

yes I think

Explanation:

Solar energy systems refer to any technology that converts the sun's energy into another form of energy, such as heat or electricity. ... Solar power is a a subset of solar energy, a more narrow term that typically refers to the conversion of the sun's rays to electricity.

Answer:

The value is  [tex]v = 2 \ m/s[/tex]

Explanation:

From the question we are told that

   The velocity of the each of the three cars is [tex]u_1 = u_2 = u_3 = 2 \ m/s[/tex]

    The velocity of the fourth car is  [tex]u_4 = 4 \ m/s[/tex]

    The initial velocity of the fifth car [tex]u_5 = 0 \ m/s[/tex]

Generally from the law of momentum conservation we have that

    [tex]m_1 u_1 + m_2 u_2 + m_3 u_3 +m_4u_4 + m_5u_5 = [m_1 + m_2 + m_3 +m_4+ m_5]v[/tex]

Given that the cars are identical then their mass will be the same

i.e

    [tex]m_1 =m_2 = m_3 = m_4 = m_5 = m[/tex]

=>   [tex][u_1 + u_2 + u_3 +u_4 + u_5]m = 5mv[/tex]

=>   [tex]2+ 2 + 2 +4 + 0 = 5v[/tex]

= >   [tex]v = 2 \ m/s[/tex]

Answer;

2.6

Explanation;

Answer:

When an object moves with a constant speed in a circular path, then its motion is called as Circular motion.

Examples of Uniform Circular Motion :--

The moon moves in uniform circular motion around the earth.

A stoned tied to a thread and rotated in circular motion.

An athlete running on a circular track.

A satellite revolving around Earth.

Explanation:

wavelength =200cm=2m

frequency is reciprocal of wavelength

f=1/2

f=0.5Hz or 1/s

The frequency of the wave with a Wavelength of 200 cm should be considered as the f=0.5Hz or 1/s.

Since the wavelength is 200 cm or 2m

Also we know that

frequency is reciprocal of wavelength

So,

f=1/2

f=0.5Hz

Hence, The frequency of the wave with a Wavelength of 200 cm should be considered as the f=0.5Hz or 1/s.

Learn more about frequency here: https://brainly.com/question/24470698

Explanation:

To derive an equation you must indicate the variable you want to solve for.

Here we have tension of an object A and Tension 1.

Two variables or unknown are given hence we cannot derive any other equations.

Answer:

c. because A will land first becuase its heavier :)

Explanation:

A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.

Answer:

A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.

Explanation:

Answer:

It will not move, so you should push with a force greater than 20 N.

Explanation:

Static friction is a force that keeps a body at rest. This means static friction will be the force that keeps the body from moving when there is no push or pull hence you should overcome it with enough opposing force for the body to move.

In this case for the body to move , you should push with a force greater than 20 N for it to move.

Answer:

same but from what i know is the newtons thingy

Explanation:

hope that helps!

Answer:

f=156.25Hz

Explanation:

v=fT

500=fx3.2

500=3.2f

divide both sides by 3.2

f=156.25Hz

Answer:

the amplitude of the sequence oscillation=

ASO = length × velocity

= 9.8 × 0.2 = 19.6

ASO = 19.6

Using Newtons Second Law:

F = m×a

F = (0.25 kg)(-2 m/s²)

F = -0.5 N

Answer:

Pressure = Force/Area

347 = 1300/Area

Area = 1300/347

area= 3.47m2

Answer:

I hope the above pic will help you

I will always help you understanding your assingments have a great day

#Captainpower

Answer:

Wave B has the longest wavelength

Explanation:

The wavelength of a wave is the distance between two consecutive points that are in phase.

The wavelength of a wave is also defined as the distance between successive crests or troughs along the z-axis.

A crest is the point of maximum upward displacement whereas a trough is a point of maximum downward displacement.

Comparing the three waves A, B and C over a unit distance.

Wave A:

Wave A has three crests and two troughs. The wave begins and ends at the rest position. There are 2½ successive points in phase in wave A

Therefore, the wavelength = 1/2.5 = 0.4

Wave B:

Over a unit distance, wave B has two crests and one trough. The wave begins at the rest position and ends at the top of a crest. There are 1¼ successive points in phase in wave B

Therefore, the wavelength = 1/1¼ = 0.8

Wave C:

Over a unit distance, wave C has four crests and four troughs. The wave begins and ends at the rest position.

There are 4 successive points in phase in wave B

Therefore, the wavelength = 1/4 = 0.25

Therefore, wave B has longest wavelength

Answer:

The minimum coefficient of static friction required, µ = 0.10

Note. The question is incomplete. The complete question is given below:

While hauling a log in the back of a flatbed truck, a driver is pulled over by the state police. Although the log cannot roll sideways, the police claim that the log could have slid out the back of the truck when accelerating from rest. The driver claims that the truck could not possibly accelerate at the level needed to achieve such an effect. Regardless, the police write a ticket anyway and now the driver court date is approaching.

The log has a mass of m = 929 kg; the truck has a mass of M = 8850 kg. According to the truck manufacturer, the truck can accelerate from 0 to 55 mph in 23.0 seconds, but this does not account for the additional mass of the log. Calculate the minimum coefficient of static friction μs needed to keep the log in the back of the truck.

Explanation:

First, velocity in mph is converted to m/s

1 mph = 0.447 m/s

55 mph ≈ 24.6 m/s

The acceleration of the empty truck is a = v/t = 24.6 / 23 = 1.07 m/s²

Force that can be generated by the truck, F = ma

F = 8850kg * 1.07 m/s² = 9469.5 N

However, with the added mass of the log on it, the acceleration of the truck will become;

a = F / m = 9469.5 N / (8550+929)kg = 0.97 m/s²

Frictional force between the log and the truck = 0.97 m/s² * 929 kg = 901.13 N

Normal reaction on the truck due to the weight of the log, R = mg

R = 929 kg * 9.8m/s² = 9104.2 N

Coefficient of static friction, µ = F/R

µ = 901.13/9104.2

µ = 0.098 ≈ 0.10

Therefore, the minimum static friction required is µ = 0.10

Answer:

Explanation: The chemical action that occurs in the cell while the current is flowing causes hydrogen bubbles to form on the surface of the anode. This action is called POLARIZATION. Some hydrogen bubbles rise to the surface of the electrolyte and escape into the air, some remain on the surface of the anode. If enough bubbles remain around the anode, the bubbles form a barrier that increases internal resistance. When the internal resistance of the cell increases, the output current is decreased and the voltage of the cell also decreases.

   A cell that is heavily polarized has no useful output. There are several methods to prevent polarization or to depolarize the cell.

   One method uses a vent on the cell to permit the hydrogen to escape into the air. A disadvantage of this method is that hydrogen is not available to reform into the electrolyte during recharging. This problem is solved by adding water to the electrolyte, such as in an automobile battery. A second method is to use material that is rich in oxygen, such as manganese dioxide, which supplies free oxygen to combine with the hydrogen and form water.

   A third method is to use a material that will absorb the hydrogen, such as calcium. The calcium releases hydrogen during the charging process. All three methods remove enough hydrogen so that the cell is practically free from polarization.

LOCAL ACTION

   When the external circuit is removed, the current ceases to flow, and, theoretically, all chemical action within the cell stops. However, commercial zinc contains many impurities, such as iron, carbon, lead, and arsenic. These impurities form many small electrical cells within the zinc electrode in which current flows between the zinc and its impurities. Thus, the chemical action continues even though the cell itself is not connected to a load.

   Local action may be prevented by using pure zinc (which is not practical), by coating the zinc with mercury, or by adding a small percentage of mercury to the zinc during the manufacturing process. The treatment of the zinc with mercury is called amalgamating (mixing) the zinc. Since mercury is many times heavier than an equal volume of water, small particles of impurities weighing less than mercury will float to the surface of the mercury. The removal of these impurities from the zinc prevents local action. The mercury is not readily acted upon by the acid. When the cell is delivering current to a load, the mercury continues to act on the impurities in the zinc. This causes the impurities to leave the surface of the zinc electrode and float to the surface of the mercury. This process greatly increases the storage life of the cell.

Answer:

Enamel is used to coat the wires, it is the thinnest possible insulator. The coils are made up of large number of turns and enamel makes it possible to cram a lot of wires (coils) in much smaller space.

Answer:

Person A

Explanation:

Person A hears the highest frequency from the horn than Person B because Person A is present in front of a Car 1 while the Person B present behind the Car 1. The car horn is present at the front so the Person A will hear the highest frequency from the horn as compared to Person B which hears lower frequency from the horn. If the horn is present at the back side so Person B will hear highest frequency from the horn.

Answer:

1.2 mi/hr/sec

Explanation:

a = Vf - Vi / t (formula)

-----------------------------------

     6mi/hr - 0 mi/hr        6 mi/hr

a = ____________ =    _______ = 1.2 mi/hr/sec

              5 sec                 5 sec

Answer:

The energy used by the iron is 0.2083 KWH.

Explanation:

Electric Energy

The energy consumed by an electrical appliance is given by:

E = P.t

Where:

P = Power consumed

t = Time the appliance is connected to the power supply

The power can be calculated as a function of the voltage V and the current I:

P = V.I

Therefore, the energy is:

E = V.I.t

The electric iron draws a current of I=5 A when connected to a V=250 V supply for t=10 minutes. The time must be expressed in hours, thus t=10/60=0.167 hours.

Thus, the energy is:

E = 250 V * 5 A * 0.167 H

E = 208.33 WH

Converting to KWH:

E = 208.33/1000 = 0.2083 KWH

The energy used by the iron is 0.2083 KWH

Answer:

with the increase in mass of the object , the force of gravitation increases that eventually increases the potential energy if the object is still fixed in its relative position with surrounding objects.

Explanation:

hopes this will help you

Answer: ⇒  Answer is 3

"A small force may produce a large change in momentum by acting on a very massive object".

THEY HAVEN'T GIVEN US THE TIME PERIOD NOR THE DISTANCE TRAVELED. THEREFORE WE CANNOT ACTUALLY DECIDE IF THE FORCE IS KEPT FOR A LONG TIME OR SHORT TIME. ANYWAYS SINCE THE MASS IS GIVEN AS MASSIVE , THE  MOMENTUM SHOULD BE DEFINITELY HIGH.

WHY I SAY OTHERS ARE WRONG:

1) For a small force to give a large change in momentum, it should act for a long time interval.

2) By applying a large force for a short time interval, the change of momentum should be large.

3) Correct answer.

4) Acting over a short distance can be the same as acting over a short period of time.Therefore the distance should be large in order for a larger momentum.

I HOPE IT HELPS!

The true statement is required.

The true statement is A large force the change in momentum may be small acting over a short time interval.

Force is given by

[tex]F=ma[/tex]

m = Mass of object

a = Acceleration = [tex]\dfrac{v-u}{t}[/tex]

t = Time

So, force is

[tex]F=m\dfrac{v-u}{t}\\\Rightarrow F=\dfrac{mv-mu}{t}\\\Rightarrow F=\dfrac{\Delta p}{t}[/tex]

[tex]\Delta p[/tex] = Change in momentum.

If the time taken is small then the force will be large.

The change in momentum can also be small.

So, for a large force the change in momentum may be small acting over a short time interval.

Learn more:

https://brainly.com/question/14559060

https://brainly.com/question/18762737

Answer:

t = 6 s

Explanation:

Given that,

A chair is thrown upward from a balcony that's 96 ft in the air, d = 96 ft

The initial velocity of chair, u = 16 ft/s

We need to find how many seconds does the chair take to reach its highest height. Let the time is t.

[tex]t=\dfrac{d}{v}\\\\t=\dfrac{96\ ft}{16\ ft/s}\\\\=6\ s[/tex]

Hence, the chair take 6 seconds to reach its maximum height.