While setting Vps to a constant value of 5 V, sweep the gate voltage from 0 V to 5 V in increments of 0.1 V. Plot a curve of I, vs. los. At what value of los does the current turn on?

The significance of a source in research is crucial as it determines the reliability and validity of the information presented. A credible source is important because it ensures that the information presented is accurate and trustworthy.

Using sources that are not credible or reliable can lead to the spread of misinformation, which can have practical consequences such as wrong decisions and actions based on incorrect information. Theoretical consequences could include flawed research or faulty arguments. It is important to consider the limitations, objections, or weaknesses of a source, as these can undermine its significance. This includes evaluating factors such as bias, sample size, and methodology used in the research.

To know more about credible source, here

brainly.com/question/16530693

#SPJ1

--The complete Question is, Identify the significance of the source—why is it important?—what practical or theoretical consequences might follow from the main point?—what limitations, objections, or weaknesses might be present that could serve to undermine the significance of the source?--

The amount of useful work that can be obtained for this particular process at 300 K is -3.0 kJ.

For a reversible process, the amount of useful work (in kJ) that can be obtained is given by the equation:

w = -δg = δh - Tδs

where δs is the change in entropy of the system.

Since the process is carried out reversibly, δs can be calculated using the equation:

δs = δqrev / T

where δqrev is the heat absorbed by the system during a reversible process.

Since δh = -7.0 kJ and δg = -10.0 kJ, we know that the process is exothermic (δh < 0) and spontaneous (δg < 0). Therefore, δqrev must be negative, indicating that heat is released from the system.

We can calculate δqrev using the equation:

δqrev = -Tδs = -T(δh / T) = -δh = 7.0 kJ

Substituting this value into the equation for work, we get:

w = -δg = δh - Tδs = -10.0 kJ - (-7.0 kJ) = -3.0 kJ

Therefore, the amount of useful work for this particular process at 300 K is -10.0 kJ.

Learn more about work here: brainly.com/question/31050706

#SPJ11

Part A:
To determine the velocity of the car at the given instant, we need to use the formula:
v = rω
where v is the velocity of the car, r is the radius of the circular road, and ω is the angular velocity of the radar gun.
At the instant θ = 45 degrees, we can convert this to radians by multiplying by π/180:
θ = 45° × π/180 = 0.7854 radians
We know that the angular velocity of the radar gun is 0.2 rad/s, so we can plug in these values to find the velocity of the car:
v = rω
v = (220 m)(0.2 rad/s)
v = 44 m/s
Therefore, the velocity is 44 m/s.

Part B:
To determine the acceleration of the car at the given instant, we need to use the formula:
a = rα
where a is the acceleration of the car, r is the radius of the circular road, and α is the angular acceleration of the radar gun.
We can plug in the given values to find the acceleration of the car:
a = rα
a = (220 m)(0.040 rad/s²)
a = 8.8 m/s²

Therefore, the acceleration is 8.8 m/s²

Learn more about acceleration at https://brainly.com/question/29223620

#SPJ11

There are 7.26 kilograms in 16 lb. This is because we can use the conversion factor of 2.20 lb = 1 kg. Therefore, we can divide 16 lb by 2.20 lb/kg to get the equivalent weight in kilograms:  16 lb / 2.20 lb/kg = 7.26 kg

So, if you have 16 lb of something, it is equivalent to 7.26 kg.
To convert 16 pounds (lb) to kilograms (kg), you can use the conversion factor provided: 1 kg = 2.20 lb. To find the number of kilograms in 16 lb, you can set up a proportion:

16 lb × (1 kg / 2.20 lb)

The "lb" units cancel out, leaving you with:

16 ÷ 2.20 kg

After performing the division, you get:

7.27 kg (approximately)

So, there are approximately 7.27 kilograms in 16 pounds, using the given conversion factor.

learn more about conversion factors here: brainly.com/question/12194554

#SPJ11

A straight wire has much lower inductance than a coiled wire, as the magnetic fields generated by the current are less likely to interact with each other and create self-inductance.

To shape a given length of wire to give it the greatest self-inductance, you would want to create a tightly wound coil, such as a solenoid.

The self-inductance of a solenoid is proportional to the square of the number of turns, so the more turns you can create with the given length of wire, the greater the inductance will be.

Additionally, keeping the turns close together will help maximize the inductance.

On the other hand, to achieve the least self-inductance, you would want to keep the wire as straight as possible

For more information on self-inductance and its effect on wire refer to https://brainly.in/question/14293968

#SPJ11

A straight wire has much lower inductance than a coiled wire, as the magnetic fields generated by the current are less likely to interact with each other and create self-inductance.

To shape a given length of wire to give it the greatest self-inductance, you would want to create a tightly wound coil, such as a solenoid.

The self-inductance of a solenoid is proportional to the square of the number of turns, so the more turns you can create with the given length of wire, the greater the inductance will be.

Additionally, keeping the turns close together will help maximize the inductance.

On the other hand, to achieve the least self-inductance, you would want to keep the wire as straight as possible

For more information on self-inductance and its effect on wire refer to https://brainly.in/question/14293968

#SPJ11

The mass flow rate of water in the pipe is approximately 0.58875 kg/s using the formula of mass flow rate.

To find the mass flow rate of water in the pipe, we'll use the formula:
Mass flow rate = Area of the pipe × Velocity × Density of water

Step 1: Calculate the area of the pipe.
[tex]Area = \pi * (Diameter / 2)^2[/tex]

Diameter = 10 cm = 0.1 m (convert cm to m by dividing by 100)

[tex]Area = \pi  * (0.1 / 2)^2 = \pi  × (0.005)^2 = 0.000785 m^2[/tex]

Step 2: Use the given velocity.
Velocity = 0.75 m/s

Step 3: Determine the density of water.
The density of water is approximately 1000 kg/m³.

Step 4: Calculate the mass flow rate.
Mass flow rate = Area × Velocity × Density
[tex]Mass flow rate = 0.000785 m^2 * 0.75 m/s * 1000 kg/m^3 = 0.58875 kg/s[/tex]

Learn more about mass flow rate here:

https://brainly.com/question/23159800

#SPJ11

(a) Bar graph with x-axis showing the number of returns and y-axis showing the proportion of new cars sold with that number of returns.

(b) Line graph with x-axis showing the number of returns and y-axis showing the cumulative proportion of new cars sold with up to that number of returns.

(c) Mean = 0.95 returns, calculated as (00.28)+(10.36)+(20.23)+(30.09)+(40.04).

(d) Variance = 1.715 returns^2, calculated as [(0-0.95)^20.28]+[(1-0.95)^20.36]+[(2-0.95)^20.23]+[(3-0.95)^20.09]+[(4-0.95)^20.04].

In part (a), we represent the probability distribution function using a bar graph. The x-axis shows the number of returns, and the y-axis shows the proportion of new cars sold with that number of returns. In part (b), we plot the cumulative probability distribution using a line graph. The x-axis shows the number of returns, and the y-axis shows the cumulative proportion of new cars sold with up to that number of returns.

learn more about returns here:

https://brainly.com/question/29569139

#SPJ11

To supply 70,000 BTU/h (about 20 kW) of baseboard electric heating to the cabin, you would need 4 circuits, and the resistance of each baseboard strip in a single circuit would be approximately 7.3 ohms.

To determine how many circuits are needed and the resistance of each baseboard strip in a single circuit for a cabin with 70,000 BTU/h (about 20 kW) of baseboard electric heating, we'll need to follow these steps:

1. Convert the desired heating capacity to watts:
70,000 BTU/h * (1 kW / 3412.14 BTU/h) ≈ 20,500 W

2. Calculate the power per circuit:
Power per circuit = Voltage x Current = 220 V x 30 A = 6,600 W

3. Determine the number of circuits needed:
Number of circuits = Total Power / Power per circuit = 20,500 W / 6,600 W ≈ 3.1
Since you can't have a fraction of a circuit, you'll need 4 circuits to supply the required power.

4. Calculate the total resistance for each circuit:
Resistance (R) = Voltage² / Power = (220 V)² / 6,600 W ≈ 7.3 ohms.

Learn more about resistance:

https://brainly.com/question/17563681

#SPJ11

To design a cascode amplifier meeting the specified requirements, follow these steps:

1. Calculate the voltage gain (Av) using the formula Av = 12 * SQRT(Z + 35), where Z is the sum of the last 3 digits of your student number.
2. Determine the load resistance (RL) using the formula RL = 6 * (Z + 40)² Ω, and round up to the nearest standard value stocked in the lab.
3. Use a high-pass filter at the input to achieve the low frequency cutoff (fL) of less than 200 Hz.
4. Design the cascode amplifier using 2N3904 transistors with collector currents set to 1.0 mA ±10%. The power supply voltages should be limited to +5V, +15V, or -15V.
5. Maximize the high frequency cutoff (fH) to exceed 1 MHz by carefully selecting component values and minimizing parasitic capacitances.
6. Ensure the output voltage can reach 2 V peak-peak without distortion by keeping the AC base-emitter voltage below 10 mV peak-peak.
7. Prevent DC current from flowing in RL and the signal generator by using coupling capacitors.
8. Calculate and measure the input and output impedances at 1 kHz.
9. Limit the total circuit power to 50 mW.
10. Use the available capacitors (1 x 100 µF, 1 x 33 µF, 1 x 10 µF, 2 x 1 µF, 1 x 0.1 µF) in the design.
11. Choose all other components as needed to achieve the desired performance while adhering to the constraints.

By following these steps, you will design a cascode amplifier that meets the given requirements. Remember, no adjustable components are allowed, and all transistors must be 2N3904.

For more such questions on cascode amplifier, visit:

brainly.com/question/14869225

#SPJ11

The kinetic energy of a pendulum is greatest at the bottom of its swing, when it is moving fastest.

As the pendulum swings away from its equilibrium position, it gains potential energy, which is converted into kinetic energy as it swings back toward the center. At the top of the swing, the pendulum briefly comes to a stop before changing direction and swinging back down, so its kinetic energy is momentarily zero. But as it reaches the bottom of the swing, it has the highest velocity and therefore the greatest amount of kinetic energy.

To know more about the kinetic energy :

https://brainly.com/question/26472013

#SPJ11

The percentage uncertainty of the angular speed= 5%

To determine the percentage uncertainty of the angular speed ω, we can use the following formula:

Percentage Uncertainty of ω = (Percentage Uncertainty of T) * (Constant Value)

In this case, the percentage uncertainty of T is 5%, and the constant value is 2π (from the formula ω = 2π/T). Therefore:

Percentage Uncertainty of ω = (5%) * (2π)

However, since we're only interested in the percentage uncertainty, we don't need to multiply by the constant value (2π). So, the percentage uncertainty of ω is the same as the percentage uncertainty of T:

Percentage Uncertainty of ω = 5%

So, the correct answer is C i.e.5%

To know more about angular speed, visit https://brainly.com/question/30885221

#SPJ11

Output Voltage of the lithium cell = 2.9994 V

Output Voltage is the maximum voltage that a cell can offer after overcoming its own internal resistance that arises from the construction of the cell.

To find the output voltage of the lithium cell, you need to consider the voltage drop across the internal resistance due to the current draw. You can use Ohm's Law for this calculation: Voltage drop = Current × Resistance.

In this case, the current draw is 0.300 mA, and the internal resistance is 2.00 Ω. First, convert the current to amperes: 0.300 mA = 0.0003 A.

Now, calculate the voltage drop: Voltage drop = 0.0003 A × 2.00 Ω = 0.0006 V.

Finally, subtract the voltage drop from the initial cell voltage: Output voltage = 3.0000 V - 0.0006 V = 2.9994 V.

The output voltage of the lithium cell is approximately 2.9994 V.

To know more about voltage, visit https://brainly.com/question/2364325

#SPJ11

Inverse proportional relationship between velocity and time originally existed for the measured data of an object moving at a constant rate, which was linearized to obtain the equation: velocity(m/s) = (10(m))/(t(s)).

The original relationship between velocity and time was inverse proportional. This can be seen in the equation given: velocity = (10m)/(t), where m is a constant of proportionality representing the distance travelled by the object. As time increases, velocity decreases, and vice versa. This is a characteristic of motion at a constant rate, where the object covers equal distances in equal time intervals, resulting in a uniform decrease in velocity over time. To linearize the data, the students likely plotted velocity versus the inverse of time, which would give a straight line with a negative slope.

To know more about velocity, here

brainly.com/question/17127206

#SPJ1

The momentum of the box at t = 2.05s is (-2.3345375i - 1.131034j) kgm/s.

To find the momentum of the box at t = 2.05s, we need to use the equation:

p(t) = p(0) + ∫Fnet(t)dt

where p(0) is the initial momentum of the box, Fnet(t) is the net force acting on the box at time t, and ∫ represents the definite integral.

First, let's find the net force at t = 2.05s:

Fnet(2.05s) = (0.275N/s)(2.05s)i + (-0.460N/s²)(2.05s)²j

= 0.563875i - 4.86195j N

Next, let's integrate the net force from t = 0s to t = 2.05s:

∫Fnet(t)dt = ∫(0.275t)i + (-0.460t²)j dt

= (0.138t²)i - (0.153333t³)j from t = 0s to t = 2.05s

= (0.5654625)i - (5.081034j) Ns

Finally, we can find the momentum of the box at t = 2.05s:

p(2.05s) = p(0) + ∫Fnet(t)dt

= (-2.90kgm/s)i + (3.95kgm/s)j + (0.5654625)i - (5.081034j) Ns

= (-2.3345375)i - (1.131034j) kgm/s

To know more about definite integral click on below link:

https://brainly.com/question/29974649#

#SPJ11

Answer: a. The frequency of A is greater than the frequency of B.

c. The period of A is shorter than the period of B.

e. The wavelength of A is longer than the wavelength of B.

Explanation:

The frequency of a sound, or the number of waves or cycles per second, determines its pitch. Sounds with higher pitches have a higher frequency than those with lower pitches.

The length of time it takes for a sound wave to complete one full cycle is known as its period. The relationship between the period and frequency is inverse. This implies that the time shortens as the frequency lengthens.

The distance between two successive wave points that are in phase, or have the same displacement and velocity, is known as the wavelength of a sound wave. The wavelength has an inverse relationship with sound speed and a direct relationship with frequency. Accordingly, if the sound speed remains constant, the wavelength will decrease as the frequency rises.

The maximum displacement of particles from their resting state is the amplitude of a sound wave. The pitch and frequency of the sound are unaffected by the amplitude. It solely controls the sound's volume or intensity.

The medium that sound travels through determines its speed. In general, sound moves more quickly through solids than through liquids and through liquids than through gases. A sound wave's frequency or pitch have no bearing on how quickly it travels.

The length of string is 16.0 kg·m²/s

What is Mass?

Mass is a fundamental property of matter that quantifies the amount of substance or material present in an object. It is a scalar quantity, meaning it only has magnitude and no direction. Mass is commonly measured in units such as kilograms (kg), grams (g), or other appropriate units depending on the context.

a. Mass: 2.0 kg

Velocity: 2.0 m/s

Length of string: 2.0 m

Angular momentum: 8.0 kg·m²/s

b. Mass: 3.0 kg

Velocity: 1.0 m/s

Length of string: 2.0 m

Angular momentum: 6.0 kg·m²/s

c. Mass: 1.0 kg

Velocity: 3.0 m/s

Length of string: 2.0 m

Angular momentum: 6.0 kg·m²/s

d. Mass: 2.0 kg

Velocity: 1.0 m/s

Length of string: 4.0 m

Angular momentum: 2.0 kg·m²/s

e. Mass: 2.0 kg

Velocity: 2.0 m/s

Length of string: 4.0 m

Angular momentum: 8.0 kg·m²/s

Learn more about Mass from the given link

https://brainly.com/question/86444

#SPJ1

The moment of inertia of the stick when it is pivoted about its midpoint is (1/6)ML². The answer choice is (B).

When the stick is pivoted about its midpoint, we can split it into two equal pieces of mass M/2 and length L/2, each with a moment of inertia of:

I₁ = (1/3)(M/2)(L/2)² = (1/12)ML²

The parallel axis theorem tells us that the moment of inertia of the whole stick about its midpoint is equal to the sum of the moments of inertia of the two pieces plus the moment of inertia of the stick as if it were a point mass at its center of mass:

I₂ = 2I₁ + (1/12)M(L/2)²

I₂ = (2/12)ML² + (1/48)ML²

I₂ = (1/6)ML²

Option B is correct.

To know more about inertia, here

brainly.com/question/3268780

#SPJ1

The charge carriers in the conductor are likely to be negative, and they are not absent, but their speed is not near the speed of light due to the effects of collisions in the conductor.

Based on the given information, we know that the conductor is experiencing a magnetic force due to the magnetic field pointing onto the page. Additionally, we know that the point labeled as "point" is at a higher potential than the point labeled as "t".

The direction of the current flowing from left to right in the conductor is indicative of the direction in which the charge carriers are moving. Given this information, we can determine that the charge carriers in the conductor must be negative because electrons are negatively charged and move opposite to the direction of conventional current flow.

Furthermore, the fact that the charge carriers are moving in a conductor does not necessarily imply that they are moving near the speed of light. The speed at which electrons move in a conductor is known as the drift velocity and is typically much slower than the speed of light due to collisions with other particles in the conductor.

For more such questions on Charge.

https://brainly.com/question/27986842#

#SPJ11

1) Power in lamp 3.2 Watts, 2) Current in hair dryer is 82.6 Volts, 3) Resistance in circuit is 0.1Ω

To find the power supplied to the lamp, you can use the formula P = I²R, where P is power, I is current, and R is resistance.
1. Plug in the given values: P = (0.8 A)² × 5 Ohms
2. Calculate: P = 0.64 × 5
3. Get the result: P = 3.2 Watts
Answer: The power supplied to the lamp is 3.2 Watts.
Question 33:
To find the voltage of the hair dryer, you can use the formula P = IV, where P is power, I is current, and V is voltage.
1. Rearrange the formula to solve for voltage: V = P / I
2. Plug in the given values: V = 578 W / 7 A
3. Calculate: V = 82.5714
4. Round to 1 decimal place: V = 82.6 Volts
Answer: The voltage that produces the current for the hair dryer is 82.6 Volts.
Question 34:
To find the resistance of the circuit, you can use the formula P = V²/R, where P is power, V is voltage, and R is resistance.
1. Rearrange the formula to solve for resistance: R = V² / P
2. Plug in the given values: R = (2.1 V)² / 59 W
3. Calculate: R = 4.41 / 59
4. Get the result: R = 0.07475
5. Round to 1 decimal place: R = 0.1 Ω
Answer: The resistance of the circuit is 0.1 Ohms.

Learn more about current here

https://brainly.com/question/30114440

#SPJ11

The eclipse that occurs when the Moon is in between the Sun and the Earth and partially or completely blocks out the Sun is known as a solar eclipse.

During a solar eclipse, the Moon casts a shadow on the Earth's surface, creating a path of totality where the Sun is completely blocked out, and a partial eclipse where only part of the Sun is covered. Solar eclipses occur only during a new moon when the Moon passes between the Sun and the Earth.

During a solar eclipse, the Moon's shadow falls on the Earth's surface, causing the Sun to appear as if it is being covered or "eclipsed" by the Moon. Depending on the alignment of the Sun, Moon, and Earth, a solar eclipse can be either partial or total.

Therefore,  A total solar eclipse occurs when the Moon completely covers the Sun, and only the Sun's corona (outer atmosphere) is visible as a glowing ring around the Moon.

To know more about solar eclipse refer here :

https://brainly.com/question/1077760

#SPJ11

a)  the net current in the conductors is 3.38 A. b) the line integral in the opposite direction will be:  ∮B⃗ ⋅dl⃗ = -4.25×10^-4 T⋅m

To solve this problem, we can use Ampere's Law, which relates the line integral of the magnetic field around a closed loop to the net current passing through the loop.

A) The equation for Ampere's Law is: ∮B⃗ ⋅dl⃗ = μ0I, where μ0 is the permeability of free space and I is the net current passing through the loop. Solving for I, we get:

I = ∮B⃗ ⋅dl⃗ / μ0

Substituting the given values, we get:

I = (4.25×10^-4 T⋅m) / (4π×10^-7 T⋅m/A)

I = 3.38 A

Therefore, the net current in the conductors is 3.38 A.

B) If we integrate around the curve in the opposite direction, the value of the line integral will be negative, since the direction of the magnetic field will be opposite. Specifically, we can use the fact that reversing the direction of the line integral is equivalent to reversing the direction of the loop, which changes the sign of the enclosed current.

Therefore, the line integral in the opposite direction will be:  ∮B⃗ ⋅dl⃗ = -4.25×10^-4 T⋅m

To learn more about conductors click here

brainly.com/question/8426444

#SPJ11

Answer:

John applied a force of approximately [tex]795\; {\rm N}[/tex] (on average, rounded) on Lucy.

John slows down to a stop after approximately another [tex]5.37\; {\rm s}[/tex].

(Assuming that [tex]g = 9.81\; {\rm N\cdot kg^{-1}}[/tex].)

Explanation:

Assuming that the surface is level. The normal force on Johnny will be equal to the weight of Johnny: [tex]N(\text{John}) = m(\text{John})\, g[/tex]. Similarly, the normal force on Lucy will be equal to weight [tex]N(\text{Lucy}) = m(\text{Lucy})\, g[/tex].

Multiply normal force by the coefficient of kinetic friction to find the friction on each person:

[tex]f(\text{John}) = \mu_{k}\, N(\text{John}) = \mu_{k}\, m(\text{John})\, g[/tex].

[tex]f(\text{Lucy}) = \mu_{k}\, N(\text{Lucy}) = \mu_{k}\, m(\text{Lucy})\, g[/tex].

Again, because the surface is level, the net force on each person after the first [tex]1.0\; {\rm s}[/tex] will be equal to the friction. Divide that the net force on each person by the mass of that person to find acceleration:
[tex]\displaystyle a(\text{John}) = \frac{\mu_{k}\, m(\text{John})\, g}{m(\text{John})} = \mu_{k}\, g[/tex].

[tex]\displaystyle a(\text{Lucy}) = \frac{\mu_{k}\, m(\text{Lucy})\, g}{m(\text{Lucy})} = \mu_{k}\, g[/tex].

(Note that the magnitude of acceleration is independent of mass and is the same for both John and Lucy.)

[tex]a = \mu_{k}\, g= (0.2)\, (9.81\; {\rm m\cdot s^{-2}}) = 1.962\; {\rm m\cdot s^{-2}}[/tex].

In other words, after the first [tex]1\; {\rm s}[/tex], both John and Lucy will slow down at a rate of [tex]1.962\; {\rm m\cdot s^{-2}}[/tex].

To find the speed of Lucy immediately after the first [tex]1.0\: {\rm s}[/tex], multiply this acceleration by the time [tex]t = 8.0\; {\rm s}[/tex] it took for Lucy to slow down to [tex]0\; {\rm m\cdot s^{-1}}[/tex]:

[tex]\begin{aligned}& (8.0\; {\rm s})\, (1.962\; {\rm m\cdot s^{-2}}) \\ =\; & (8.0)\, (1.962)\; {\rm m\cdot s^{-1}} \\ =\; & 15.696\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Thus, in the first [tex]1.0\; {\rm s}[/tex], Lucy accelerated (from [tex]0\; {\rm m\cdot s^{-1}}[/tex]) to [tex]15.696\; {\rm m\cdot s^{-1}}[/tex].

The average acceleration of Lucy in the first [tex]1.0\; {\rm s}[/tex] would be [tex](15.696) / (1) = 15.696\; {\rm m\cdot s^{-2}}[/tex]. Multiply this average acceleration by the mass of Lucy to find the average net force on Lucy during that [tex]1.0\; {\rm s}[/tex]:

[tex]\begin{aligned}F_{\text{net}}(\text{Lucy}) &= m(\text{Lucy})\, a \\ &= (45)\, (15.696)\; {\rm N} \\ &= 706.320\; {\rm N}\end{aligned}[/tex].

This net force on Lucy during that [tex]1.0\; {\rm s}[/tex] is the combined result of both the push from Johnny and friction:

[tex]F_{\text{net}}(\text{Lucy}) = F(\text{push}) - f(\text{Lucy})[/tex].

Since [tex]f(\text{Lucy}) = \mu_{k}\, N(\text{Lucy}) = \mu_{k}\, m(\text{Lucy})\, g[/tex]:

[tex]\begin{aligned}F(\text{push}) &= F_{\text{net}}(\text{Lucy}) + f(\text{Lucy}) \\ &= F_{\text{net}}(\text{Lucy}) + \mu_{k}\, m(\text{Lucy})\, g \\ &= (706.320) \; {\rm N}+ (0.2)\, (45)\, (9.81)\; {\rm N} \\ &= 706.320\; {\rm N} + 88.290\; {\rm N} \\ &=794.610\; {\rm N}\end{aligned}[/tex].

In other words, Johnny would have applied a force of [tex]794.610\; {\rm N}[/tex] on Lucy.

By Newton's Laws of Motion, when Johnny exerts this force on Lucy in that [tex]1.0\; {\rm s}[/tex], Lucy would exert a reaction force on Johnny of the same magnitude: [tex]794.610\; {\rm N}[/tex].

Similar to Lucy, the net force on Johnny during that [tex]1.0\; {\rm s}[/tex] will be the combined effect of the push [tex]F(\text{push})[/tex] and friction [tex]f(\text{John}) = \mu_{k}\, m(\text{John})\, g[/tex]:

[tex]\begin{aligned}F_{\text{net}}(\text{John}) &= F(\text{push}) - f(\text{John}) \\ &= F(\text{push}) - \mu_{k}\, m(\text{John})\, g\\ &= 794.610\; {\rm N} - (0.2)\, (65)\, (9.81)\; {\rm N} \\ &= 667.080\; {\rm N}\end{aligned}[/tex].

Divide net force by mass to find acceleration:

[tex]\begin{aligned}\frac{667.080\; {\rm N}}{65\; {\rm kg}} \approx 10.2628\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].

In other words, Johnny accelerated at a rate of approximately [tex]10.5406\; {\rm m\cdot s^{-2}}[/tex] during that [tex]1.0\; {\rm s}[/tex]. Assuming that Johnny was initially not moving, the velocity of Johnny right after that [tex]1.0\; {\rm s}\![/tex] would be:

[tex](0\; {\rm m\cdot s^{-1}}) + (10.2628\; {\rm m\cdot s^{-2}})\, (1.0\; {\rm s}) = 10.2628\; {\rm m\cdot s^{-1}}[/tex].

After the first [tex]1.0\; {\rm s}[/tex], the acceleration of both John and Lucy (as a result of friction) would both be equal to [tex]a = \mu_{k}\, g= (0.2)\, (9.81\; {\rm m\cdot s^{-2}}) = 1.962\; {\rm m\cdot s^{-2}}[/tex]. Divide initial velocity of Johnny by this acceleration to find the time it took for Johnny to slow down to a stop:

[tex]\displaystyle \frac{10.2628\; {\rm {m\cdot s^{-1}}}}{1.962\; {\rm m\cdot s^{-2}}} \approx 5.23\; {\rm s}[/tex].

Answer:

John applied a force of approximately [tex]795\; {\rm N}[/tex] (on average, rounded) on Lucy.

John slows down to a stop after approximately another [tex]5.37\; {\rm s}[/tex].

(Assuming that [tex]g = 9.81\; {\rm N\cdot kg^{-1}}[/tex].)

Explanation:

Assuming that the surface is level. The normal force on Johnny will be equal to the weight of Johnny: [tex]N(\text{John}) = m(\text{John})\, g[/tex]. Similarly, the normal force on Lucy will be equal to weight [tex]N(\text{Lucy}) = m(\text{Lucy})\, g[/tex].

Multiply normal force by the coefficient of kinetic friction to find the friction on each person:

[tex]f(\text{John}) = \mu_{k}\, N(\text{John}) = \mu_{k}\, m(\text{John})\, g[/tex].

[tex]f(\text{Lucy}) = \mu_{k}\, N(\text{Lucy}) = \mu_{k}\, m(\text{Lucy})\, g[/tex].

Again, because the surface is level, the net force on each person after the first [tex]1.0\; {\rm s}[/tex] will be equal to the friction. Divide that the net force on each person by the mass of that person to find acceleration:
[tex]\displaystyle a(\text{John}) = \frac{\mu_{k}\, m(\text{John})\, g}{m(\text{John})} = \mu_{k}\, g[/tex].

[tex]\displaystyle a(\text{Lucy}) = \frac{\mu_{k}\, m(\text{Lucy})\, g}{m(\text{Lucy})} = \mu_{k}\, g[/tex].

(Note that the magnitude of acceleration is independent of mass and is the same for both John and Lucy.)

[tex]a = \mu_{k}\, g= (0.2)\, (9.81\; {\rm m\cdot s^{-2}}) = 1.962\; {\rm m\cdot s^{-2}}[/tex].

In other words, after the first [tex]1\; {\rm s}[/tex], both John and Lucy will slow down at a rate of [tex]1.962\; {\rm m\cdot s^{-2}}[/tex].

To find the speed of Lucy immediately after the first [tex]1.0\: {\rm s}[/tex], multiply this acceleration by the time [tex]t = 8.0\; {\rm s}[/tex] it took for Lucy to slow down to [tex]0\; {\rm m\cdot s^{-1}}[/tex]:

[tex]\begin{aligned}& (8.0\; {\rm s})\, (1.962\; {\rm m\cdot s^{-2}}) \\ =\; & (8.0)\, (1.962)\; {\rm m\cdot s^{-1}} \\ =\; & 15.696\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Thus, in the first [tex]1.0\; {\rm s}[/tex], Lucy accelerated (from [tex]0\; {\rm m\cdot s^{-1}}[/tex]) to [tex]15.696\; {\rm m\cdot s^{-1}}[/tex].

The average acceleration of Lucy in the first [tex]1.0\; {\rm s}[/tex] would be [tex](15.696) / (1) = 15.696\; {\rm m\cdot s^{-2}}[/tex]. Multiply this average acceleration by the mass of Lucy to find the average net force on Lucy during that [tex]1.0\; {\rm s}[/tex]:

[tex]\begin{aligned}F_{\text{net}}(\text{Lucy}) &= m(\text{Lucy})\, a \\ &= (45)\, (15.696)\; {\rm N} \\ &= 706.320\; {\rm N}\end{aligned}[/tex].

This net force on Lucy during that [tex]1.0\; {\rm s}[/tex] is the combined result of both the push from Johnny and friction:

[tex]F_{\text{net}}(\text{Lucy}) = F(\text{push}) - f(\text{Lucy})[/tex].

Since [tex]f(\text{Lucy}) = \mu_{k}\, N(\text{Lucy}) = \mu_{k}\, m(\text{Lucy})\, g[/tex]:

[tex]\begin{aligned}F(\text{push}) &= F_{\text{net}}(\text{Lucy}) + f(\text{Lucy}) \\ &= F_{\text{net}}(\text{Lucy}) + \mu_{k}\, m(\text{Lucy})\, g \\ &= (706.320) \; {\rm N}+ (0.2)\, (45)\, (9.81)\; {\rm N} \\ &= 706.320\; {\rm N} + 88.290\; {\rm N} \\ &=794.610\; {\rm N}\end{aligned}[/tex].

In other words, Johnny would have applied a force of [tex]794.610\; {\rm N}[/tex] on Lucy.

By Newton's Laws of Motion, when Johnny exerts this force on Lucy in that [tex]1.0\; {\rm s}[/tex], Lucy would exert a reaction force on Johnny of the same magnitude: [tex]794.610\; {\rm N}[/tex].

Similar to Lucy, the net force on Johnny during that [tex]1.0\; {\rm s}[/tex] will be the combined effect of the push [tex]F(\text{push})[/tex] and friction [tex]f(\text{John}) = \mu_{k}\, m(\text{John})\, g[/tex]:

[tex]\begin{aligned}F_{\text{net}}(\text{John}) &= F(\text{push}) - f(\text{John}) \\ &= F(\text{push}) - \mu_{k}\, m(\text{John})\, g\\ &= 794.610\; {\rm N} - (0.2)\, (65)\, (9.81)\; {\rm N} \\ &= 667.080\; {\rm N}\end{aligned}[/tex].

Divide net force by mass to find acceleration:

[tex]\begin{aligned}\frac{667.080\; {\rm N}}{65\; {\rm kg}} \approx 10.2628\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].

In other words, Johnny accelerated at a rate of approximately [tex]10.5406\; {\rm m\cdot s^{-2}}[/tex] during that [tex]1.0\; {\rm s}[/tex]. Assuming that Johnny was initially not moving, the velocity of Johnny right after that [tex]1.0\; {\rm s}\![/tex] would be:

[tex](0\; {\rm m\cdot s^{-1}}) + (10.2628\; {\rm m\cdot s^{-2}})\, (1.0\; {\rm s}) = 10.2628\; {\rm m\cdot s^{-1}}[/tex].

After the first [tex]1.0\; {\rm s}[/tex], the acceleration of both John and Lucy (as a result of friction) would both be equal to [tex]a = \mu_{k}\, g= (0.2)\, (9.81\; {\rm m\cdot s^{-2}}) = 1.962\; {\rm m\cdot s^{-2}}[/tex]. Divide initial velocity of Johnny by this acceleration to find the time it took for Johnny to slow down to a stop:

[tex]\displaystyle \frac{10.2628\; {\rm {m\cdot s^{-1}}}}{1.962\; {\rm m\cdot s^{-2}}} \approx 5.23\; {\rm s}[/tex].

The correct expression about the entropy of the environment and the gas for an isobaric compression of an ideal gas is ∆S + ∆Senv > 0, where ∆S is the change in entropy of the gas and ∆Senv is the change in entropy of the environment.

Thus, the total change in entropy of the system (gas) and the environment is positive, which is expressed as ∆S + ∆Senv > 0. The other options given (∆S > 0 and ∆S + ∆Seny = 0) are not correct for an isobaric compression process.

The characteristic impedance of the two 1-oz cu lands 100 mils in width that are located on opposite sides of a 47-mil glass epoxy board is approximately 47.4 ohms.

The characteristic impedance (Z0) of a transmission line depends on the geometry of the line and the dielectric constant of the material between the conductors. The formula for the characteristic impedance of a microstrip transmission line is:

Z0 = (87.3 + 100*(w/h)ln(4w/h)) * (h/w)

where w is the width of the trace, h is the height of the substrate, and ln is the natural logarithm.

Assuming a standard FR-4 epoxy substrate with a dielectric constant of 4.5, and using the formula above with w = 100 mils (0.1 inch) and h = 47 mils (0.047 inch), we get:

Z0 = (87.3 + 100*(0.1/0.047)ln(40.1/0.047)) * (0.047/0.1) = 47.4 ohms

Therefore, the characteristic impedance of the two 1-oz cu lands 100 mils in width that are located on opposite sides of a 47-mil glass epoxy board is approximately 47.4 ohms.

Learn more about impedance

https://brainly.com/question/30040649

#SPJ4

The sensitivity of the galvanometer inside the voltmeter is 30,500,000 µA.

Hi! To find the sensitivity (in µA) of the galvanometer inside a voltmeter with a 1.00 mΩ resistance on its 30.5 V scale, you can follow these steps:

1. First, note the full-scale voltage, V = 30.5 V, and the internal resistance of the voltmeter, R = 1.00 mΩ.
2. Use Ohm's law to calculate the current for full-scale deflection, I = V/R.
3. Convert the calculated current to microamperes (µA).

Now, let's calculate the sensitivity of the galvanometer:

1. V = 30.5 V, R = 1.00 mΩ = 0.001 Ω (since 1 mΩ = 0.001 Ω).
2. I = V/R = 30.5 V / 0.001 Ω = 30500 A.
3. Convert the current to µA: 1 A = 1,000,000 µA, so 30500 A = 30,500,000 µA.

So, the sensitivity of the galvanometer inside the voltmeter is 30,500,000 µA.

To know more about galvanometer refer here:

https://brainly.com/question/17247518

#SPJ11

Reducing the surface pressure would lead to a decrease in the power required to operate the pumps. This is because reducing the pressure at the surface of a liquid lowers the boiling point of the liquid.

As a result, less energy is required to move the liquid through the pumps. This is because the lower boiling point means the liquid is less resistant to flow, and the pumps can move it more easily.

Additionally, reducing the surface pressure can reduce the amount of air in the liquid, which can also decrease the power required to operate the pumps. When there is air in the liquid, the pumps have to work harder to move the liquid through the system.

By reducing the surface pressure, the amount of air in the liquid can be reduced, and the pumps can work more efficiently.

Overall, reducing the surface pressure can lead to a decrease in the power required to operate the pumps, making the system more energy efficient.

to know more about power refer here:

https://brainly.com/question/29883444#

#SPJ11

It is important to note that reducing the surface pressure may also affect the flow rate of the fluid, which could in turn affect the power required by the pump.

Surface pressure, also known as atmospheric pressure, is the force exerted by the weight of the Earth's atmosphere on the surface below. It is the result of the constant collisions between air molecules and the surface they come into contact with.

The unit of measurement for surface pressure is typically expressed in millibars (mb) or inches of mercury (inHg). It varies depending on factors such as temperature, altitude, and weather conditions. The standard sea-level pressure is around 1013 mb or 29.92 inHg. Surface pressure is an important parameter for meteorology and weather forecasting. It is used to determine areas of high and low pressure, which influence wind patterns, air masses, and precipitation.

To learn more about Surface pressure visit here:

brainly.com/question/12950024

#SPJ4

Complete Question:-

How would reducing the surface pressure affect the power required to operate the pumps (answer qualitatively)?

(a)the astronaut must travel at a speed of 0.999999999998 times the speed of light relative to Earth.

(b)the kinetic energy of the spacecraft is 4.499 x 10^23 Joules.

(c) the cost of this energy is $165,643,646,517,000,000,000,000 (over 165 sextillion dollars).

(a) To determine the speed of the astronaut relative to Earth, we can use the formula for time dilation in special relativity: t_0 = t / sqrt(1 - v^2/c^2)

where t_0 is the proper time (i.e. the time experienced by the astronaut), t is the time measured by observers on Earth, v is the velocity of the spacecraft relative to Earth, and c is the speed of light. Solving for v, we get: v = c * sqrt(1 - (t/t_0)^2)

Plugging in the given values, we get: v = c * sqrt(1 - (30.0 years / t_0)^2)

where t_0 is the proper time experienced by the astronaut. We know that the distance to the Andromeda galaxy is 2.00 million light-years, so we can use the distance formula to find t_0: t_0 = d/v

where d is the distance to the Andromeda galaxy. Plugging in the given values, we get:

t_0 = (2.00 million light-years) / c = (2.00 million light-years) / (299,792,458 m/s) = 6.32 x 10^15 s

Substituting this value into the formula for v, we get:

v = c * sqrt(1 - (30.0 years / 6.32 x 10^15 s)^2)

v = 0.999999999998 c

Therefore, the astronaut must travel at a speed of 0.999999999998 times the speed of light relative to Earth.

(b) To find the kinetic energy of the spacecraft, we can use the formula:

K = (1/2) * m * v^2

where K is the kinetic energy, m is the mass of the spacecraft, and v is the velocity of the spacecraft relative to Earth. Plugging in the given values, we get:

K = (1/2) * (1.00 x 10^6 kg) * (0.999999999998 c)^2

K = 4.499 x 10^23 J

Therefore, the kinetic energy of the spacecraft is 4.499 x 10^23 Joules.

(c) To find the cost of this energy, we need to convert Joules to kilowatt-hours (kWh) and then multiply by the price per kWh. We can use the following conversion factor:

1 J = 2.77778 x 10^-7 kWh

Plugging in the given values, we get:

cost = (4.499 x 10^23 J) * (2.77778 x 10^-7 kWh/J) * (13.0 cents/kWh)

cost = $165,643,646,517,000,000,000,000

Therefore, the cost of this energy is $165,643,646,517,000,000,000,000 (over 165 sextillion dollars). This highlights the fact that the amount of energy required for intergalactic travel is immense, and that our current understanding of physics may not allow for such journeys to be feasible.

To learn more about speed here:

https://brainly.com/question/28224010

#SPJ11

To calculate the work done by the force when the car moves from x=0.0m to x=7.0m, we need to integrate the force over the distance traveled.W = ∫Fdx



Since the force varies with the x-coordinate of the car, we need to know the equation for the force as a function of x. Without that information, we can't calculate the work done.

To calculate the speed of the car at x=4.0m, we need to use the equations of motion. Assuming that the force is the only external force acting on the car, we can use:

F = ma

where F is the force, m is the mass of the car (2.0 kg), and a is the acceleration of the car.

Since the force varies with x, we need to know the equation for the force as a function of x. Without that information, we can't calculate the acceleration of the car, and therefore we can't calculate the speed at x=4.0m.

To know more about force:https://brainly.com/question/12785175

#SPJ11

Answer:

it has a fixed volume and maintains it's shape

Generational wealth is a kind of asset that passes from one generation to another. It gives freedom to think and live.

The History of Jews in the United States is one of the racial changes that provides insight into the race in America. American Jews of different eras have ethnoracial identities.

Generational wealth is a kind of asset that is passed down from one generation to the other. The first generation enjoys the property of the family and then it passes to their children.

From generational wealth, a person can gain financial freedom to live. By investing in real estate and the stock market, and by creating various income of sources, we can create generational wealth.

To learn more about generational wealth:

https://brainly.com/question/28481650

#SPJ1