If the dog decides to stay in the middle of the street, the vehicle won't hit the dog.
Given that the initial velocity of the vehicle, u = 15.0 m/s. Distance of dog from vehicle, S = 20.0 m, Negative acceleration of vehicle, a = -6.0 m/s²Reaction time = 0.45 sWe can find the following:Final velocity, vVelocity after the brake is applied = u + a*tv = 15 + (-6) × 0.45v = 12.7 m/sTime required to reach the dog, t, can be found using distance equation.S = ut + 1/2 a t²20 = 15t + 0.5 × (-6) × t²20 = 15t - 3t²On solving the quadratic equation,
t = 3.8 sSince reaction time is 0.45s, the total time required to reach the dog is t - 0.45= 3.8 - 0.45 = 3.35sWe can now find the distance travelled by the vehicle in this time. Using the kinematic equation,S = ut + 1/2 at²20 = 15 × 3.35 + 0.5 × (-6) × 3.35²20 = 50.25 - 35.59s = 14.66 mHence the distance travelled by the vehicle before it comes to rest is 14.66m.
Since the dog is at a distance of 20m from the vehicle, the vehicle won't hit the dog if it decides to stay in the middle of the street. Therefore, the dog is safe.Conclusion: Therefore, if the dog decides to stay in the middle of the street, the vehicle won't hit the dog.
Learn more about Equation here,What is equation? Define equation
https://brainly.com/question/29174899
#SPJ11
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the:
A. Child
B. Parents
C. Cannot answer with the information given.
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the: A. Child
According to the theory of relativity, time dilation occurs when an object is moving at a significant fraction of the speed of light or in the presence of strong gravitational fields. This means that time can appear to pass differently for observers in different reference frames.
In the scenario described, if the space trip involves traveling at speeds close to the speed of light or in the presence of strong gravitational fields, time dilation effects could occur. As a result, the individuals on the space trip would experience time passing slower compared to those on Earth.
Therefore, if the child is on the space trip while the parents remain on Earth, the child would age slower relative to the parents. This means that when the space trip concludes and the child returns to Earth, they may be biologically younger than their parents, even though less time has passed for them.
To know mre about theory of relativity
https://brainly.com/question/32093861
#SPJ11
A rectangular loop of an area of 40.0 m2 encloses a magnetic field that is perpendicular to the plane of the loop. The magnitude of the magnetic varies with time as, B(t) = (14 T/s)t. The loop is connected to a 9.6 Ω resistor and a 16.0 pF capacitor in series. When fully charged, how much charge is stored on the capacitor?
The charge stored on the capacitor is 8.96 × 10⁻⁶ C (Coulombs).
Given information:Area of the rectangular loop = 40.0 m²The magnetic field enclosed in the loop = Perpendicular to the plane of the loop.Magnitude of magnetic field = (14 T/s)tResistor = 9.6 ΩCapacitor = 16.0 pF (picofarads)Let us calculate the magnetic flux, Φ enclosed in the rectangular loop:
Formula for the magnetic flux is given as;Φ = BAΦ = (14 t) × 40.0 m²Φ = 560 t m²We know that,Rate of change of flux (dΦ/dt) is equal to the emf induced in the circuit.Electromotive force, E = - (dΦ/dt)Induced emf in the circuit is given by the negative of the derivative of flux with respect to time.E = - dΦ/dtE = - d/dt (560 t m²)E = - 560 V (volts).
Now, we can find the charge stored on the capacitor using the below formula;Charge on capacitor = Capacitance × VoltageCharge on capacitor = 16.0 pF × 560 VCharge on capacitor = 8.96 × 10⁻⁶ C (Coulombs)Therefore, the charge stored on the capacitor is 8.96 × 10⁻⁶ C (Coulombs).
Learn more about Electromotive force here,
https://brainly.com/question/30083242
#SPJ11
Electrical current in a conductor is measured as a constant 2.45 mA for 28 S. How many electrons pass a section of the conductor in this time interval?
we need to calculate the total charge passing through the conductor and then convert it to the number of electrons. Thus, in the given time interval of 28 s, approximately 4.29 x 10^17 electrons pass through the section of the conductor.
First, we need to calculate the charge passing through the conductor using the formula Q = I * t. The current is given as 2.45 mA, which we convert to Amperes by dividing by 1000, resulting in 0.00245 A. The time is given as 28 s. Therefore, the charge passing through the conductor is Q = 0.00245 A * 28 s = 0.0686 C.
To convert the charge to the number of electrons, we divide it by the elementary charge, denoted as e. The elementary charge represents the charge carried by a single electron, which is approximately 1.6 x 10^-19 C. Therefore, the number of electrons passing through the conductor is 0.0686 C / (1.6 x 10^-19 C) = 4.29 x 10^17 electrons.
Learn more about conductor here:
https://brainly.com/question/14405035
#SPJ11
Which of the following is NOT true? The sum of two vectors of the same magnitude cannot be zero The location of a vector on a grid has no impact on its meaning The magnitude of a vector quantity is considered a scalar quantity Any vector can be expressed as the sum of two or more vectors What would be the distance from your starting position if you were to follow the directions: "Go North 10 miles, then East 4 miles and then South 7 miles" 7 miles 5 miles 21 miles 14 miles
The statement "The magnitude of a vector quantity is considered a scalar quantity" is NOT true. The magnitude of a vector represents its size or length and is always a scalar quantity
A scalar quantity only has magnitude and no direction. On the other hand, a vector quantity includes both magnitude and direction. Therefore, the magnitude of a vector cannot be considered a scalar quantity.
Regarding the given directions, "Go North 10 miles, then East 4 miles, and then South 7 miles," we can calculate the distance from the starting position by considering the net displacement. Moving North 10 miles and then South 7 miles cancels out the vertical displacement, resulting in a net displacement of 3 miles to the North.
Moving East 4 miles adds to the net displacement, giving us a final displacement of 3 miles North and 4 miles East. By using the Pythagorean theorem, the distance from the starting position is calculated as [tex]\sqrt(3^2 + 4^2) = \sqrt(9 + 16) = \sqrt25 = 5[/tex] miles.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ11
An inductor of L=8.15H with negligible resistance is placed in series with a E=15.3 V battery, a R=3.00Ω resistor, and a switch. The switch is closed at time t=0 seconds. Calculate the initial current at t=0 seconds. I(t=0 s)= A Calculate the current as time approaches infinity. I max
= Calculate the current at a time of 2.17 s. I(t=2.17 s)= A Determine how long it takes for the current to reach half of its maximum.
Tt takes 2.07 seconds for the current to reach half of its maximum.
Given data:
L = 8.15 H Battery voltage, E = 15.3 VR = 3.00 Ω
From the given data, the initial current (I) flowing through the circuit at the time, t = 0 can be calculated using the equation for inductor in series with a resistor.I = E / (R + L di/dt)
Here, R = 3.00 Ω, L = 8.15 H, E = 15.3 V and t = 0 seconds∴ I (t = 0 s) = E / (R + L di/dt) = 15.3 / (3.00 + 8.15*0) = 15.3 / 3.00 = 5.1 A
The initial current (I) at t = 0 seconds is 5.1 A. The current through the circuit as the time approaches infinity, Imax is given by; I(max) = E / R = 15.3 / 3.00 = 5.1 A
Therefore, the current as the time approaches infinity is 5.1 A. The current at a time of 2.17 seconds can be calculated by the equation; I = I(max)(1 - e ^(-t/(L/R)))Here, L/R = τ is called the time constant of the circuit, and e is the base of the natural logarithm, ∴ I(t = 2.17 s) = I(max)(1 - e^(-2.17/τ)) = I(max)(1 - 1 - [tex]e^{-2.17/(L/R)}[/tex]) = I(max)(1 -[tex]e^{(-2.17/(8.15/3))}[/tex] ) = 5.1(1 - [tex]e^{-0.844}[/tex]) = 2.11 A
Therefore, the current at a time of 2.17 seconds is 2.11 A. The time taken for the current to reach half of its maximum can be calculated by the equation for current; I = I(max)(1 - [tex]e^{-t/(L/R)}[/tex])
Here, when I = I(max)/2, t = τ/ln(2), where ln(2) is the natural logarithm of 2.∴ t = τ/ln(2) = (L/R)ln(2) = (8.15/3)ln(2) = 2.07 s
Therefore, it takes 2.07 seconds for the current to reach half of its maximum.
To learn about current here:
https://brainly.com/question/1100341
#SPJ11
The rms speed of molecules in a gas at 21 °C is to be increased by 6.0%.
To what temperature must it be raised? Express your answer to three significant figures and include the appropriate units.
The gas must be raised to approximately 311.27 K in order to increase the rms speed by 6.0%.
To calculate the temperature to which the gas must be raised in order to increase the root mean square (rms) speed by 6.0%, we can use the following equation:
T2 = (1 + Δv/v) * T1
where T2 is the final temperature, Δv is the change in rms speed, v is the initial rms speed, and T1 is the initial temperature.
Given that the change in rms speed is 6.0% (or 0.06) and the initial temperature is 21 °C, we need to convert the temperature to Kelvin:
T1 = 21 °C + 273.15 = 294.15 K
Now we can calculate the final temperature:
T2 = (1 + 0.06) * 294.15 K
T2 ≈ 311.27 K
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
Moving electrons pass through a double slit and an The separation between the two slits is 0.012μm,1μm=10 −6
m, and the first-order minimum (equivalent to dark interference pattern (similar to that formed by light) fringe formed by light) is formed at an angle of 11.78 ∘
relative to the incident electron beam. is shown on the screen, as in - Part A - Find the wavelength of the moving electrons The unit is nm,1 nm=10 −9
m. Keep 2 digits after the decimal point. The separation between the two slits is d=0.012 μm, and the first-order minimum (equivalent to dark fringe formed by light) is formed at an angle of 11.78 ∘
relative to the incident electron beam. Use h=6.626 ⋆
10 −34
Js for Planck constant. Part B - Find the momentum of each moving electron. Use scientific notations, format 1.234 ∗
10 n
.
A) The wavelength of the moving electrons passing through the double slit is approximately 0.165 nm.
B) The momentum of each moving electron can be calculated as 5.35 × 10^(-25) kg·m/s.
A) To find the wavelength of the moving electrons, we can use the equation for the first-order minimum in the double-slit interference pattern:
d * sin(θ) = m * λ
where d is the separation between the two slits, θ is the angle of the first-order minimum, m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the electrons.
Rearranging the equation to solve for λ:
λ = (d * sin(θ)) / m
Substituting the given values:
λ = (0.012 μm * sin(11.78°)) / 1 = 0.165 nm
Therefore, the wavelength of the moving electrons is approximately 0.165 nm.
B) The momentum of each moving electron can be calculated using the de Broglie wavelength equation:
λ = h / p
where λ is the wavelength, h is Planck's constant, and p is the momentum of the electron.
Rearranging the equation to solve for p:
p = h / λ
Substituting the given value of λ (0.165 nm) and Planck's constant (6.626 × [tex]10^{(-34)[/tex] Js):
p = (6.626 × 10^(-34) Js) / (0.165 nm) = 5.35 × 10^(-25) kg·m/s
Therefore, the momentum of each moving electron is approximately 5.35 × [tex]10^{(-25)[/tex] kg·m/s.
Learn About momentum Here:
https://brainly.com/question/30677308
#SPJ11
It takes 880 J to raise the temperature of 350 g of lead from 0°C to 20.0°C. What is the specific heat of lead? kJ/(kg-K)
The specific heat of lead is approximately 0.1257 kJ/(kg-K).
To find the specific heat of lead, we can use the formula:
Q = mcΔT
Where:
Q is the heat energy transferred (in joules),
m is the mass of the substance (in kilograms),
c is the specific heat capacity of the substance (in joules per kilogram per Kelvin), and
ΔT is the change in temperature (in Kelvin).
First, let's convert the given values to the appropriate units:
Mass (m) = 350 g = 0.35 kg
Change in temperature (ΔT) = 20.0°C - 0°C = 20.0 K
Now we can rearrange the formula to solve for the specific heat (c):
c = Q / (m × ΔT)
Substituting the values we have:
c = 880 J / (0.35 kg × 20.0 K)
c = 880 J / 7 kg-K
Finally, let's convert the result to kilojoules per kilogram per Kelvin (kJ/(kg-K)):
c = 880 J / 7 kg-K × (1 kJ / 1000 J)
c ≈ 0.1257 kJ/(kg-K)
Therefore, the specific heat of lead is approximately 0.1257 kJ/(kg-K).
Learn more about specific heat here:
https://brainly.com/question/29427458
#SPJ11
Using the Skygazer's Almanac for 2022 at 40 degrees. On what
date does Deneb transit at 9:00 PM?
To find the date when Deneb transits at 9:00 PM using the Skygazer's Almanac for 2022 at 40 degrees latitude, locate the transit time range for Deneb at 9:00 PM and determine the corresponding date within that range by considering the previous and following transit times.
The Deneb star's transit time can be calculated using the Skygazer's Almanac for 2022 at 40 degrees latitude. To determine the date when Deneb transits at 9:00 PM, follow these steps:
1. Locate the section in the Skygazer's Almanac that provides the transit times for Deneb at 40 degrees latitude.
2. Look for the date range in which Deneb transits at 9:00 PM.
3. Determine the specific date within that range by considering the previous and following transit times for Deneb.
4. Keep in mind that transit times may vary slightly depending on the specific latitude within the 40-degree range.
5. It's important to consult the Almanac for the correct year, as transit times can change from year to year.
Please note that I don't have access to the specific Skygazer's Almanac for 2022, so I cannot provide you with the exact date. I recommend referring to the Almanac directly to obtain the accurate information.
In conclusion, using the Skygazer's Almanac for 2022 at 40 degrees, you can find the date when Deneb transits at 9:00 PM by locating the specific transit time range and determining the corresponding date within that range.
Learn more about latitude
https://brainly.com/question/30459307
#SPJ11
During a certain time interval, the angular position of a swinging door is described by 0 = 5.08 + 10.7t + 1.98t2, where 0 is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door at the following times.
The angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
The given equation describes the angular the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².position of a swinging door:0 = 5.08 + 10.7t + 1.98t²The angular position (θ) can be determined asθ = 5.08 + 10.7t + 1.98t²Let's calculate the angular position of the door at t = 0.8 s;θ = 5.08 + 10.7(0.8) + 1.98(0.8)²θ = 11.496 rad (rounded to three significant figures)The angular position of the door at t = 0.8 s is 11.5 rad.The angular speed (ω) is the time derivative of the angular position (θ) with respect to time (t).ω = dθ/dt = 10.7 + 3.96t
Let's calculate the angular speed of the door at t = 0.8 s;ω = 10.7 + 3.96(0.8)ω = 13.502 rad/s (rounded to three significant figures)The angular speed of the door at t = 0.8 s is 13.5 rad/s.The angular acceleration (α) is the time derivative of the angular speed (ω) with respect to time (t).α = dω/dt = 3.96Let's calculate the angular acceleration of the door at t = 0.8 s;α = 3.96 rad/s²The angular acceleration of the door at t = 0.8 s is 3.96 rad/s². Hence, the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A 2kg hockey puck on a frozen pond is given an initial speed of 20 m/s. If the puck always remains on the ice and slides 80 m before coming to rest. What is the frictional force acting on the puck (in N)? a. 5 b. 10 112 C. 4 O d. 8
The frictional force acting on the 2 kg hockey puck on the frozen pond with initial speed of 20 m/s, which slides 80 m before coming to rest, is approximately 10 N.
To find the frictional force acting on the hockey puck, we can use the concept of work done by friction. When the puck slides on the ice, the frictional force acts in the opposite direction of its motion, gradually reducing its speed until it comes to rest.
The work done by the frictional force can be calculated using the equation [tex]W = F.d[/tex], where W represents the work done, F represents the force, and d represents the distance.
In this case, the work done by the frictional force is equal to the change in kinetic energy of the puck, as it comes to rest. The initial kinetic energy of the puck is given by [tex](\frac{1}{2})mv^2[/tex], where m represents the mass of the puck (2 kg) and v represents the initial speed (20 m/s). The final kinetic energy is zero since the puck comes to rest.
Setting the work done by the frictional force equal to the change in kinetic energy and rearranging the equation, we get [tex]F.d = (\frac{1}{2})mv^2[/tex].
Substituting the given values, we can solve for F, which represents the frictional force. The calculated value is approximately 10 N.
Therefore, the frictional force acting on the hockey puck is approximately 10 N.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
If one drops an object from the top of a building and hears the
object touches the ground 10 seconds later. Roughly, what is the
height of the building? which one of these answers is correct 500
meter
The height of the building is approximately 490 meters. Thus, the correct answer is 490 meters.
To calculate the height of a building from which an object is dropped and the time it takes to reach the ground, we can use the formula:
h = 1/2 * g * t^2
Where:
h = height of the building
g = acceleration due to gravity = 9.8 m/s^2
t = time taken by the object to reach the ground
In this case, the object takes 10 seconds to reach the ground. Therefore,
t = 10 s
Substituting the given values, we have:
h = 1/2 * 9.8 * (10)^2
h = 490 m
Learn more about height
https://brainly.com/question/29131380
#SPJ11
A storage tank at STP contains 28.9 kg of nitrogen (N2) What is the volume of the tank? What is the pressure if an additional 28.1 kg of nitrogen is added without changing the temperature?
The volume of the tank is approximately 24046.31 liters.
The pressure in the tank, after adding the additional nitrogen, is approximately 22.963 atm.
We'll use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Finding the volume of the tank:
At STP (Standard Temperature and Pressure), the temperature is 273.15 K, and the pressure is 1 atm. We need to find the volume of the tank when it contains 28.9 kg of nitrogen (N2).
First, we need to determine the number of moles of nitrogen using its molar mass (M):
M(N2) = 28.02 g/mol
Number of moles (n) = mass / molar mass
n = 28.9 kg / (28.02 g/mol) = 1030.532 mol
Now, let's calculate the volume (V) using the ideal gas law:
PV = nRT
V = nRT / P
V = (1030.532 mol) * (0.0821 L·atm/mol·K) * (273.15 K) / (1 atm)
V ≈ 24046.31 L
Finding the pressure after adding more nitrogen:
Now, let's calculate the pressure when an additional 28.1 kg of nitrogen is added to the tank, without changing the temperature.
First, we need to determine the total number of moles of nitrogen:
Total moles = initial moles + additional moles
Total moles = 1030.532 mol + (28.1 kg / (28.02 g/mol))
Total moles ≈ 1030.532 mol + 1000 mol ≈ 2030.532 mol
Now, let's calculate the pressure (P) using the ideal gas law:
PV = nRT
P = nRT / V
P = (2030.532 mol) * (0.0821 L·atm/mol·K) * (273.15 K) / (24046.31 L)
P ≈ 22.963 atm
To know more about ideal gas law
https://brainly.com/question/30458409
#SPJ11
An oil film floats on a water surface. The indices of refraction for water and oil, respectively, are 1.33 and 1.47. If a ray of light is incident on the air-to-oil surface, the refracted angle in the oil is 35 degrees. What is the angle of refraction in the water? in degrees.
The angle of refraction in the water is approximately 53.8 degrees. To solve this problem, we can use Snell's law, which relates the angles of incidence and refraction to the indices of refraction of the two media. Snell's law is given by:
n1 * sin(θ1) = n2 * sin(θ2),
where:
n1 and n2 are the indices of refraction of the first and second media, respectively,
θ1 is the angle of incidence,
θ2 is the angle of refraction.
In this case, the incident ray of light is traveling from air to oil, so n1 = 1 (since the index of refraction of air is approximately 1). The index of refraction of oil is given as n2 = 1.47, and the angle of refraction in the oil is θ2 = 35 degrees.
We need to find the angle of refraction in the water, θ1.
Rearranging Snell's law, we have:
sin(θ1) = (n2 / n1) * sin(θ2).
Substituting the given values, we have:
sin(θ1) = (1.47 / 1) * sin(35°).
Using a calculator, we can evaluate the right side of the equation to find:
sin(θ1) ≈ 0.796.
To find θ1, we take the inverse sine (or arcsine) of 0.796:
θ1 ≈ arcsin(0.796).
Evaluating this expression using a calculator, we find:
θ1 ≈ 53.8°.
Therefore, the angle of refraction in the water is approximately 53.8 degrees.
To know more about The angle of refraction
brainly.com/question/32038813
#SPJ11
. A ray of light travels in a glass and exits into the air. The critical angle of the glass-air interface is 39 ∘
. Select possible correct pairs of angles of incident and refraction. 2 The speed of red light in glass A is faster than in glass B. Which of the following is/are TRUE? A. The index of refraction of B is higher than A. B. The speed of light in A is lower than in the air. C. The frequency of the red light is the same in both glasses. 3. Which of the following statement is/are TRUE about the polarization of waves? A. Sound waves can exhibit a polarization effect. B. Polarization is an orientation of an oscillation. C. Radiowave cannot be polarized because it is invisible. 4. Which of the following optical phenomena causes the change in the wavelength of a wave? A. Reflection B. Refraction C. Diffraction 5. Unpolarised light of intensity, I o
passes through three polarisers as shown in FIGURE 2. The second and third polarizers are rotated at angles θ 1
and θ 2
relative to the vertical line. θ 2
is set to 80 ∘
. What is/are the possible values of θ 1
and I 2
? 6. Which of the following optical elements always produce a virtual image? A. Positive lens B. Diverging lens C. Convex mirror 7. FIGURE 3 shows a television receiver which consists of a dish and the signal collector on a house roof. It receives radio waves from a long-distance transmitter containing information about television programs. Which statement is/are TRUE about the receiver? A. The receiver applies the effect of wave reflection. B. The receiver acts as a lens to focus received radiowaves. C. The receiver changes the wavelength of the received radio waves. 8. Which of the following lens has a positive focal length? 9. An image has twice the magnification of its object and is located on the opposite side of the object. The possible optical element(s) which can produce the condition is/are A. positive lens. B. concave lens. C. concave mirror. 10. An object and a converging mirror are positioned with the labelled focal point, F, as shown in FIGURE 4. Which ray(s) come(s) from the object's tip? FIGURE 4 11. Farhan has a far point of 90 cm. Which of the following is TRUE about her? A. He can use a concave mirror to correct her vision. B. He could not sharply see an object beyond 90 cm from his eyes. C. He can use contact lenses with negative optical power to correct her vision.
2 A. The index of refraction of B is higher than A.B. The speed of light in A is lower than in the air.C.
The frequency of the red light is the same in both glasses. 3. B. Polarization is an orientation of an oscillation.4. B. Refraction 5. θ1 = 50°, I2 = Io/4.6. C. Convex mirror. 7. A. The receiver applies the effect of wave reflection. 8. Positive lens. 9. A. Positive lens.10. Ray 1 and Ray 3 come from the object's tip.
B. He could not sharply see an object beyond 90 cm from his eyes.Explanation:2. If the speed of light in A is faster than in B, then the index of refraction of A will be lower than in B. So, statement A is not true, statement B is true and the frequency of the red light will be the same in both glasses because the medium change does not affect the frequency of the light.3. Polarization is an orientation of an oscillation. It is a property of transverse waves, including electromagnetic waves such as light and radio waves.4. Refraction is the bending of light when it passes from one transparent medium to another transparent medium. When light travels through different mediums, the speed changes, and this changes the direction of light. This change in direction and speed is called refraction.5. The intensity of unpolarized light after passing through the first polarizer is Io/2 and after passing through the second polarizer, it becomes Io/4.
The final intensity of light depends on the angle between the two polarizers. The value of θ1 can be calculated using the formula, I2 = Io/4 cos²(θ1 - θ2).6. A convex mirror always produces a virtual image that is smaller than the object and appears closer to the mirror than the actual object.7. The signal collector on the house roof of a TV receiver works based on the reflection of radio waves. The curved dish acts as a reflector to focus the incoming radiowaves on the signal collector.8. A positive lens is a lens that converges incoming light rays and has a positive focal length. Convex lens is a positive lens.9. The magnification produced by a lens or mirror depends on the focal length of the element. Only positive lenses have positive focal lengths. So, a positive lens will produce twice the magnification of the object and will be located on the opposite side of the object.10. Ray 1 and Ray 3 come from the object's tip. Ray 1 is parallel to the principal axis of the mirror and after reflection from the mirror passes through the focal point F. Ray 3 passes through the focal point F before reflection from the mirror and becomes parallel to the principal axis of the mirror after reflection.11. Farhan has a far point of 90 cm. It means he cannot see a distant object beyond 90 cm from his eyes.
This means his eye's accommodation power is weak. To correct this condition, he can use concave lenses with negative optical power, not concave mirrors.
Learn more on index here:
brainly.in/question/54095030
#SPJ11
A solenoid 3.36E-2m in diameter and 0.317m long has 348 turns and carries 12.0A.
a) Calculate the flux through the surface of a disk of radius 5.00E-2m that is positioned perpendicular to and centred on the axis of the solenoid.
b) Figure b) shows an enlarged end view of the same solenoid as in the last question. Calculate the flux through the blue area, which is defined by an annulus that has an inner radius of 0.366cm and an outer radius of 0.732cm.
a) The flux through the surface of the disk is 0.0364 T·m².
b) The flux through the blue area is 0.121 T·m².
a) To calculate the flux through the surface of the disk, we can use the formula for the magnetic field inside a solenoid: B = μ₀nI, where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), n is the number of turns per unit length, and I is the current. The magnetic field inside the solenoid is uniform, and since the disk is positioned perpendicular to the axis of the solenoid, the magnetic field passing through it is also uniform.
The magnetic flux (Φ) through the surface of the disk is given by Φ = BA, where A is the area of the disk. The area of the disk can be calculated using the formula A = πr², where r is the radius of the disk. Substituting the given values into the equations, we get B = (4π × 10⁻⁷ T·m/A) × (348 turns/0.317 m) × (12.0 A) ≈ 0.436 T. The area of the disk is A = π(5.00 × 10⁻² m)² ≈ 0.7854 × 10⁻³ m². Finally, the flux is Φ = (0.436 T) × (0.7854 × 10⁻³ m²) ≈ 0.0364 T·m².
b) To calculate the flux through the blue area, we need to find the magnetic field passing through the annulus defined by the inner and outer radii. Since the solenoid is perpendicular to the plane of the annulus, the magnetic field passing through it is uniform. The flux through the annulus is given by Φ = BA, where B is the magnetic field and A is the area of the annulus. The area of the annulus can be calculated using the formula A = π(r_outer² - r_inner²), where r_outer and r_inner are the outer and inner radii, respectively.
The magnetic field B is the same as calculated in part a). Substituting the given values, we have B ≈ 0.436 T, r_outer = 0.732 cm = 0.00732 m, and r_inner = 0.366 cm = 0.00366 m. The area of the annulus is A = π((0.00732 m)² - (0.00366 m)²) ≈ 0.121 m². Therefore, the flux through the blue area is Φ = (0.436 T) × (0.121 m²) ≈ 0.121 T·m².
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
The rotor of an electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis. The motor is used to change the orientation of the space probe in which it is mounted. The motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis. Calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis. Number __________ Units _________
The electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis and the motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis, then number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is Number 0.042 Units rev .
To calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis, we can use the concept of rotational motion and the relationship between angular displacement and rotational inertia.
The formula for the angular displacement (θ) in terms of rotational inertia (I) and the number of revolutions (N) is given by:
θ = 2πN
We want to find the number of revolutions N, so we can rearrange the formula as:
N = θ / (2π)
It is given that Angular displacement (θ) = 37.0° = 37.0 * (2π / 360) rad and Rotational inertia of the probe (lₚ) = 10.9 kg·m²
Substituting the values into the formula:
N = (37.0 * (2π / 360)) rad / (2π)
N = 0.042 revolutions.
Therefore, the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is approximately 0.042 revolutions.
To learn more about inertia: https://brainly.com/question/1140505
#SPJ11
The following information is used for all questions in this quiz. A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. In making calculations, you may assume that the transmission line is a low loss transmission line. Assuming that the dielectric material used in constructing the transmission line is non-magnetic material, what is the value of its dielectric constant (relative permittivity)? Express your answer as a dimensionless quantity to two places after the decimal.
A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. The dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
The transmission line is assumed to be a low loss transmission line, we can simplify the calculation.
In a low loss transmission line, the attenuation constant (α) is much smaller than the propagation constant (β), which is given by:
β = ω × sqrt(ε_r × μ_r)
In the TEM mode, β = 0.
Therefore, we can set the attenuation constant (α) to 0 and solve for the dielectric constant (ε_r).
0 = (ω / 0.408) × sqrt((ε_r - 1) / 2)
Since α = 0, the term inside the square root must be 0 as well:
(ε_r - 1) / 2 = 0
ε_r - 1 = 0
ε_r = 1
Hence, the dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
To learn more about attenuation constant visit: https://brainly.com/question/30905516
#SPJ11
Using a vacuum chamber of diameter 75.0 cm you want to create a cyclotron that accelerates protons to 17.0% of the speed of light. What strength of magnetic field is required in order for this to work? Magnitude:
The magnitude of the required magnetic field is 0.30513 T for the given details in the question.
A magnetic field is an area where other objects experience magnetic forces due to a magnet or electric current. It has magnitude and direction characteristics. Electric charges, such as moving electrons, produce magnetic fields. Additionally, they may be brought on by shifting electric fields.
Magnetic fields can attract or repel magnetic materials and have polarity-like characteristics. They are essential components in many different applications, including as MRI machines, motors, transformers, and generators. Tesla (T) units are used to quantify the strength of magnetic fields, and terms like magnetic flux and magnetic field lines are used to characterise them.
The centripetal force exerted on a proton in a magnetic field B that moves in a circular path of radius R with a speed of v is given by:$$F_c= \frac{mv^2}{r}=\frac{m(v^2/r)}{r}$$
By equating the magnetic force with the centripetal force, we obtain:[tex]$${F_m}= {F_c}$$$$\frac{mv^2}{r} = qvB$$$$r = \frac{mv}{qB}$$[/tex]
The magnetic field strength B can be found as:[tex]$$B= \frac{mv}{qr}=\frac{mv}{q(mv^2/r)} = \frac{Bv}{qc}$$[/tex]
Substituting values, we have[tex]:$${B}=\frac{(1.6726219 \times 10^{-27}kg)(2.55073551883 \times 10^8 m/s)(0.17c)}{(1.60217662 \times 10^{-19} C)(0.75 m)}$$=$$\frac{(1.6726219 \times 2.55073551883 \times 0.17)}{(1.60217662 \times 0.75)} = 0.30513 T$$[/tex]
The magnitude of the required magnetic field is 0.30513 T.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
Helppppppp :((((((
:((((((
Answer:
b is the equivalent
do u want explanation
A uniform cylinder of radius 16.1 cm and mass 21.5 kg is mounted so as to rotate freely about a horizontal axis that is parallel to and 7.15 cm from the central longitudinal axis of the cylinder. (a) What is the rotational inertia of the cylinder about the axis of rotation? (b) If the cylinder is released from rest with its central longitudinal axis at the same height as the axis about which the cylinder rotates, what is the angular speed of the cylinder as it passes through its lowest position?
a) the rotational inertia of the cylinder about the axis of rotation is 0.226 kg [tex]m^2[/tex]. b) angular speed of the cylinder as it passes through its lowest position is 18.63 rad/s for radius
a) What is the rotational inertia of the cylinder about the axis of rotation?The expression for the rotational inertia (I) of a uniform cylinder (solid) of radius R and mass M about its central longitudinal axis is given by[tex]:I = (1/2)MR^2[/tex] …… (1)According to the question:R = 16.1 cmM = 21.5 kg
The rotational inertia of the cylinder about its central longitudinal axis is:I = (1/2)MR²= (1/2) × 21.5 kg × [tex](16.1 cm)^2[/tex]= (1/2) × 21.5 kg × [tex](0.161 m)^2[/tex]= 0.226 kg[tex]m^2[/tex]
Therefore, the rotational inertia of the cylinder about the axis of rotation is 0.226 kg[tex]m^2[/tex].
b) If the cylinder is released from rest with its central longitudinal axis at the same height as the axis about which the cylinder rotates, what is the angular speed of the cylinder as it passes through its lowest position?At the highest point, the cylinder has the maximum potential energy and zero kinetic energy. At the lowest point, the cylinder has the maximum kinetic energy and zero potential energy.
Conservation of energy principle can be applied to the cylinder released from rest as:Initial Potential Energy (at the highest point) = Final Kinetic Energy (at the lowest point)i.e. mgh = (1/2)[tex]mv^2[/tex]
Here,h = height of the cylinder above the axis of rotationm = mass of the cylinderg = acceleration due to gravityv = final velocity of the cylinderSubstituting the given values, we get:(21.5 kg) × (9.8 [tex]m/s^2[/tex]) × (0.0715 m) = (1/2) × (21.5 kg) × [tex]v^2v^2[/tex] =[tex]8.974m²/s²v[/tex] = [tex]√8.974m²/s²v[/tex]= 2.998 m/s
Therefore, the angular speed of the cylinder as it passes through its lowest position is:ω = v/r
Where,ω = angular velocity of the cylinder through its lowest positionr = radius of the cylinder
Substituting the given values, we get:ω = 2.998 m/s / 0.161 m = 18.63 rad/s
Therefore, the angular speed of the cylinder as it passes through its lowest position is 18.63 rad/s.
Learn more about radius here:
https://brainly.com/question/29115074
#SPJ11
When observing a galaxy the calcium absorption line, which has a rest wavelength of 3933 A is observed redshifted to 3936.5397 A. a)Using the Doppler shift formula calculate the cosmological recession velocity Vr, (c = 300 000km/s). b)Evaluate the Hubble constant H (in units of km/s/Mpc), assuming that the Hubble law Vr = Hd holds for this galaxy. The distance to the galaxy is measured to be 4 Mpc.
The cosmological recession velocity (Vr) is approximately 272.2272 km/s.the Hubble constant (H) is approximately 2.21 * 10^(-18) km^(-1) s^(-1).
a) To calculate the cosmological recession velocity (Vr) using the Doppler shift formula, we can use the following equation:
Vr = (λ - λ₀) / λ₀ * c
Where:
λ is the observed wavelength
λ₀ is the rest wavelength
c is the speed of light (300,000 km/s)
Given:
λ = 3936.5397 Å
λ₀ = 3933 Å
c = 300,000 km/s
Let's calculate Vr:
Vr = (3936.5397 - 3933) / 3933 * 300,000
= 0.000907424 * 300,000
= 272.2272 km/s
Therefore, the cosmological recession velocity (Vr) is approximately 272.2272 km/s.
b) The Hubble constant (H) can be evaluated using the Hubble law equation:
Vr = Hd
Where:
Vr is the cosmological recession velocity
H is the Hubble constant
d is the distance to the galaxy
Given:
Vr = 272.2272 km/s
d = 4 Mpc = 4 million parsecs = 4 * 3.09 * 10^19 km
Let's calculate H:
H = Vr / d
= 272.2272 / [tex](4 * 3.09 * 10^{19})[/tex]
≈ 2.21 * [tex]10^{(-18)} km^{(-1)} s^{(-1)}[/tex]
Therefore, the Hubble constant (H) is approximately 2.21 * [tex]10^{(-18)} km^{(-1)} s^{(-1)}[/tex].
Learn more about cosmological recession here:
https://brainly.com/question/29597892
#SPJ11
Amount of heat required to raise temperature of 10gm water through 2 deg * C is
The amount of heat required to raise the temperature of 10 g of water through 2°C is 83.68 Joules.
To determine the amount of heat required to raise the temperature of 10 g of water through 2°C, we will use the formula:Q = m × c × ΔT
Where Q is the amount of heat required, m is the mass of the substance being heated, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
So, for 10 g of water, the mass (m) would be 10 g.
The specific heat capacity (c) of water is 4.184 J/(g°C), so we'll use that value.
And the change in temperature (ΔT) is 2°C.
Substituting these values into the formula, we get:Q = 10 g × 4.184 J/(g°C) × 2°CQ = 83.68 Joules
Therefore, the amount of heat required to raise the temperature of 10 g of water through 2°C is 83.68 Joules.
For more questions on temperature
https://brainly.com/question/25677592
#SPJ8
A wire of length L0 carries a current in the -j direction in a region of field
magnetic B= B=B0k . Thus, the magnetic force on the wire points towards:
A) +j, B) –j, C) +i, D) –i
Justify your answers with equations and arguments
The magnetic force on the wire points towards the -i direction. The correct answer is option D) –i.
A wire of length L0 carries a current in the -j direction in a region of magnetic field B = B0k. Thus, the magnetic force on the wire points towards the -i direction. Let's derive the justification for this answer below.When a wire carrying current is placed in a magnetic field, it experiences a magnetic force. The direction of the force is given by the right-hand rule, which states that if you point your right thumb in the direction of the current and your fingers in the direction of the magnetic field, the force on the wire will be perpendicular to both, and will point in the direction given by your palm.
In this case, the current is in the -j direction, and the magnetic field is in the k direction, so the force will be in the -i direction. We can derive this mathematically using the cross product:F = I L x Bwhere F is the force, I is the current, L is the length of the wire, and B is the magnetic field. In this case, L is in the -j direction and B is in the k direction, so:L = -jB = B0kPlugging in these values, we get:F = I L x B = I (-j) x B0k = IB0iSince the current is in the -j direction, we have I = -I0j, so:F = -I0B0iTherefore, the magnetic force on the wire points towards the -i direction. The correct answer is option D) –i.
Learn more about Magnetic field here,Which of the following is a true statement about magnetic fields
https://brainly.com/question/14411049
#SPJ11
A thin glass rod is submerged in oil. (n oil= 1.46 and n glass= 1.5). (Hint: n₁ Sinθ₁ = n₂ Sinθ₂. Think about critical angle) a. What is the critical angle for light traveling inside the rod? b. If you replace the oil with water (n water = 1.33) what will be the critical angle?
A 20.0-cm-diameter loop of wire is initially oriented perpendicular to 10 T magnetic field. The loop is rotated so that its plane is parallel to the field direction in 0.2 s. What is the average induced emf in the loop?
The average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.
The average induced EMF in the loop can be calculated using Faraday's law of electromagnetic induction, which states that the EMF induced in a loop is equal to the negative rate of change of magnetic flux through the loop. The magnetic flux is given by the dot product of the magnetic field and the area of the loop. In this case, the loop is a circle with a diameter of 20.0 cm, so its area is πr², where r is the radius of the circle, which is 10.0 cm.
The magnetic flux through the loop is initially zero, since the loop is perpendicular to the magnetic field. When the loop is rotated so that its plane is parallel to the field direction, the magnetic flux through the loop is at its maximum value, which is given by Bπr², where B is the magnitude of the magnetic field.
The time interval over which the loop is rotated is 0.2 s. Therefore, the average induced EMF in the loop is given by:
EMF = -ΔΦ/Δt = -(Bπr² - 0)/Δt = -Bπr²/Δt
Substituting the given values, we get:
EMF = -10 T x π x (10.0 cm)² / 0.2 s = -314 V
Therefore, the average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.
Learn more about Magnetic flux here,
https://brainly.com/question/29221352
#SPJ11
Consider a classical particle of mass m in one dimension with energy between E and E. The particle is constrained to move freely inside a box of length L. a. (4) Draw and correctly label the phase space of the particle. b. (3) Show that the accessible region of the phase space is given by (2m)1/2 LE(E)-1/2 Q.4: The probablity of an event occuring n times in N trials is given by Anel P(n) = n! Workout (n), and (na).
a. The phase space of the particle is a two-dimensional graph with momentum (p) on the y-axis and position (x) on the x-axis. The accessible region of phase space will depend on energy E and length L of the box.
b. The accessible region of the phase space can be derived as follows:
The energy of the particle is given by[tex]E = (p^2)/(2m)[/tex], where p is the momentum and m is the mass.
Rearranging the equation, we have [tex]p = (2mE)^{2}[/tex].
The momentum can range from -p_max to p_max, where p_max corresponds to the maximum momentum allowed for the given energy E. Therefore, [tex]p_max = (2mE)^{2}[/tex].
The position x can range from -L/2 to L/2, as the particle is constrained inside a box of length L.
Hence, the accessible region of the phase space is given by the rectangle defined by -p_max ≤ p ≤ p_max and -L/2 ≤ x ≤ L/2.
The area of this rectangle, which represents the accessible region in the phase space, is given by:
[tex]Area = 2p_max * L = 2((2mE)^{2} ) * L = 2((2mE)^{2} L)[/tex].
Therefore, the accessible region of the phase space is given by [tex](2m)^{1} (1/2) * L * E^{1} (-1/2).[/tex]
Learn more about Momentum here:
https://brainly.com/question/30337879
#SPJ11
Q2. a) What is the circumference of a circle of
radius a? [3 pts]
b) What symbol represents the time it takes the
planet to complete a full orbit around the Sun? [3 pts]
c) Given that velocity = dista
The circumference of a circle is equal to 2π multiplied by the radius of the circle. The circumference of a circle with a radius of a is: 2πa
The circumference of a circle is the distance around the circle. This distance is the length of the curved line around the circle, and it is always the same for any circle, no matter what size it is. The circumference of a circle can be calculated by using the formula 2πr, where r is the radius of the circle. The value of π is a mathematical constant that represents the ratio of the circumference of a circle to its diameter. This value is approximately equal to 3.14159. Therefore, the circumference of a circle with a radius of a is 2πa. The circumference of a circle is an important concept in geometry, as it is used to calculate the diameter of a circle. The perimeter of a circle is the distance around the outside edge of the circle. It is important to note that the perimeter of a circle is not the same as the area of a circle, which is the amount of space inside the circle.
The symbol that represents the time it takes a planet to complete a full orbit around the Sun is T. This symbol is often used in physics and astronomy to represent the period of an object's orbit. The period of an orbit is the time it takes for an object to complete one full revolution around another object. In the case of a planet, the period of its orbit around the Sun is determined by its distance from the Sun and the gravitational force between the two objects.
Given that velocity = distance/time, what is the equation for time?
The equation for time can be derived from the formula for velocity,
which is:
velocity = distance/time
By rearranging this formula, we can solve for time: time = distance/ velocity
To know more diameter visit:
brainly.com/question/32968193
#SPJ11
A bat flying at a speed of 4.8 m/s pursues an insect flying in the same direction. The bat emits a 42000-Hz sonar pulse and hears the pulse reflected back from the insect at a frequency of (42000 + 560) Hz. Take the speed of sound to be 343 m/s
what is the speed of the insect, in meters per second, relative to the air?
The speed of the insect relative to the air is approximately 3.488 m/s in the opposite direction to the bat's flight.
The observed change in frequency of the sonar pulse, known as the Doppler effect, can be used to determine the speed of the insect. The difference between the emitted frequency (42000 Hz) and the reflected frequency (42000 + 560 Hz) is due to the motion of the insect relative to the bat.
To solve this problem, we can use the Doppler effect formula for sound:
f' = f * (v + v_s) / (v + v_o)
Where:
f' is the observed frequency
f is the emitted frequency
v is the speed of sound
v_s is the speed of the source (bat)
v_o is the speed of the observer (insect)
Given:
Emitted frequency (f) = 42000 Hz
Observed frequency (f') = 42000 + 560 = 42560 Hz
Speed of sound (v) = 343 m/s
Speed of the source (v_s) = 4.8 m/s
Let's rearrange the formula and solve for the speed of the observer (insect):
f' = f * (v + v_s) / (v + v_o)
(f' * (v + v_o)) / (v + v_s) = f
v + v_o = (f * (v + v_s)) / f'
v_o = ((f * (v + v_s)) / f') - v
Substituting the given values:
v_o = ((42000 * (343 + 4.8)) / 42560) - 343
Simplifying the equation:
v_o = (14433880 / 42560) - 343
v_o ≈ 339.512 - 343
v_o ≈ -3.488 m/s
The negative sign indicates that the insect is flying in the opposite direction of the bat.
Learn more about speed here ;
https://brainly.com/question/2141628
#SPJ11
A 1.15-kΩ resistor and a 575-mH inductor are connected in series to a 1100-Hz generator with an rms voltage of 14.3 V .
A. What is the rms current in the circuit?
B. What capacitance must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A?
A capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A.
The rms current in the series circuit consisting of a 1.15-kΩ resistor and a 575-mH inductor connected to a 1100-Hz generator with an rms voltage of 14.3 V is approximately 8.45 mA. To reduce the rms current to half this value, a capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor.
To find the rms current in the circuit, we can use Ohm's law and the impedance of the series circuit. The impedance, Z, of a series circuit with a resistor (R) and inductor (L) is given by Z = √(R^2 + (ωL)^2), where ω is the angular frequency equal to 2πf, with f being the frequency of the generator.
In this case, the resistor has a value of 1.15 kΩ and the inductor has a value of 575 mH. The frequency of the generator is 1100 Hz. Plugging these values into the impedance formula, we get Z = √((1.15×10^3)^2 + (2π×1100×575×10^-3)^2) ≈ 1.316 kΩ.
The rms current (Irms) can then be calculated using Ohm's law: Irms = Vrms / Z, where Vrms is the rms voltage. Given that Vrms is 14.3 V, we have Irms = 14.3 / 1.316 ≈ 10.88 mA. Therefore, the rms current in the circuit is approximately 10.88 mA.
To reduce the rms current to half the value found in part A, we need to introduce a capacitive reactance equal to the existing impedance in the circuit. The formula for capacitive reactance is Xc = 1 / (2πfC), where C is the capacitance. Rearranging the formula, we have C = 1 / (2πfXc).
Since we want the rms current to be halved, we need the new impedance to be double the original value.
Thus, Xc should be equal to 2Z. Plugging in the values, we get Xc = 2 × 1.316 ≈ 2.632 kΩ.
Solving for C, we have C = 1 / (2π×1100×2.632×10^3) ≈ 160.42 μF.
Learn more about Ohm's law:
https://brainly.com/question/1247379
#SPJ11