Which will shows maximum depression in freezing point when concentration is 0.1 m?

The solubility of sugar in water at 20 degree Celsius is approximately 180 g/L.

Solubility is the ability of a substance to dissolve in a liquid or other solvent. This is an important property of chemical compounds because it affects the availability of a substance in various forms, such as in a solution, suspension, or solid. For example, sugar is more soluble in hot water than in cold water, meaning that more sugar can dissolve in hot water than in cold water. Solubility can be affected by the temperature, pressure, and the chemical and physical properties of the substances involved. In general, solubility increases as temperature increases, and decreases as pressure increases. Additionally, solubility may be affected by the pH of the solution or the presence of other compounds.

Therefore:
21 g: Soluble - 21 g of sugar is soluble in water at this temperature.
204 g: Insoluble - 204 g of sugar is more than the solubility limit at this temperature, so it is insoluble.
37 g: Soluble - 37 g of sugar is soluble in water at this temperature.
164 g: Insoluble - 164 g of sugar is more than the solubility limit at this temperature, so it is insoluble.

To learn more about solubility
https://brainly.com/question/9098308
#SPJ4

The given reaction : PbCO₃ (s)⇔ PbO(s) + CO₂ is an example of a decomposition reaction.

A decomposition reaction is a reaction in which two or more different products are formed from a single reactant. It involves the breakdown of a molecule into its simpler forms.

In general, metal carbonates when heated, decomposes to form a metal oxide with the release of carbon dioxide gas. Some metals can readily decompose while some might not.

In the above given reaction, lead carbonate (PbCO₃)  which is a white amorphous powdery substance undergoes decomposition to produce the metal oxide i.e lead oxide and releases carbon dioxide gas.

To know more about decomposition reaction here

https://brainly.com/question/11464508

#SPJ4

Older pewters with a higher lead content weigh more, tarnish more quickly, and develop a darker silver-grey colour with time. Through BS5140, which was strengthened by BSEN611 in 1994, lead was eliminated from the composition in 1974.

What is Lead ?

The periodic table's element lead has an atomic number of 82.

Humans have used lead (Pb), a metal, for countless years, going all the way back to 7000 BC.

The element can be found in trace amounts in a number of minerals, with the exception of sulphide and lead glance (PBS), which are used to make the metal all over the world.

Lead (Pb) is a white, soft, shiny metal that is very malleable.

The metal is not only a good conductor of electricity but also has a strong resistance to corrosion.

When burned in the air, the metal's powdered form emits a bluish-white blaze.

Lead fluoride is created when fluorine and lead are combined at ambient temperature.

Learn more about Lead from given link

https://brainly.com/question/14254480

#SPJ4

A colorless, movable liquid with a light, sweet smell is cyclohexane. In addition to being somewhat soluble in alcohol, acetone, benzene, ethanol, ethyl ether, olive oil, and carbon tetrachloride, it is also somewhat soluble in water.

Six groups are present in the equatorial regions and another six groups are present in the axial groups, making the chair conformation structure the most stable conformation structure.

As seen in figure 1 The chair conformation will be stable when the bigger atoms or groups are at the equatorial position. This is because there is relatively little steric interaction between the atoms or groups. The bigger atoms or groups that are present at the equatorial position do not interact sterically.

The chair conformation structure in figure 2 is the stable conformation structure. Because the adjacent groups to the bulky groups are present in the axial location and the equatorial position of the bulky groups, the groups do not interact with one another.

To learn more about tetra-substituted cyclohexane, please refer:

https://brainly.com/question/25018659

#SPJ4

If you believe you may have inhaled a chemical, get outside right away.If a liquid chemical saturates skin or clothing, immediately remove clothing and thoroughly wash the affected area to remove the chemical.

Get medical help right away.If this substance comes in touch with your skin, immediately wash it off with water.If this chemical gets on your clothing, take it off right away, and immediately wash your skin with water.After cleaning, seek medical assistance if the irritation continues.

Reduce contact with chemicals by donning gloves, a mask, or other safety gear.After utilising chemicals, always wash your hands using soap and warm water.

To know more about chemical visit:

https://brainly.com/question/13145357

#SPJ4

Lemon juice harm metal.

What are metals?

Metals are shiny, opaque materials that efficiently conduct electricity and heat.

Citric acid, which is present in lemon juice, gives it an acidic nature. Iron oxide and hydrogen gas are frequently produced when iron and citric acid interact. Lemon juice is no longer suitable for eating as a result. Lemon juice is also said to be quite caustic. Lemon juice can cause micro-particle metal leaching if it comes into prolonged contact with metals or metallic containers (even metals like stainless steel quality). This could imply that a customer could unintentionally consume a corrosion-related micro metal particle. Lemon juice shouldn't be kept in an iron container as a result.

Therefore, lemon juice harm metal.

To learn more about metal from the given link.

https://brainly.com/question/4701542

#SPJ4

The following statements correctly describe a polar covalent bond are :

a. The lattice energy of an ionic compound tends to decrease as ionic size increases.

b. NaCl is expected to have a higher lattice energy than NaBr.

The lattice energy is the amount of the energy required to convert one mole of an ionic solid to gaseous. The lattice energy increases as the ion charge increase and the ionic size decreases and the lattice energy decreases as the ionic size increases.

lattice energy ∝ charge on ion / ion size

The NaCl is expected to have a higher lattice energy than NaBr. as we move down the group ionic size increases and lattice energy decreases.

To learn more about lattice energy here

https://brainly.com/question/29733836

#SPJ4

What is cross contamination?

The physical transfer of dangerous microorganisms from one person, object, or location to another is known as cross-contamination. One of the most important steps in preventing foodborne illness is preventing cross-contamination.

To learn more about cross contamination from the given link.

https://brainly.com/question/465199

#SPJ4

Answer:

it is it is because both of the items have different density which makes one of the item which are the lesser density float and the other item which is more density sink if the density of any item is more than the density of water it will always think and if the density of any substances less than the density of water it will float

Answer:

heat

Explanation:

it causes the atoms to move faster and the bonds between them become looser, and the solid changes to a liquid.

The balanced chemical equation between strong base and weak acid is represented as follows:

NaOH(aq)+ CH3COOH(aq)-----> CH3COONa(aq) + H2O(l)

When an acid reacts with a base, a salt is formed along with the formation of water, and this reaction is termed as neutralization reaction.

When a weak acid and a strong base are mixed, they react according to the following net-ionic equation: HA(aq) + OH⁻(aq) → A⁻(aq) + H₂O(l).

The balanced chemical equation between strong base and weak acid is represented as follows:

NaOH(aq)+ CH3COOH(aq)-----> CH3COONa(aq) + H2O(l)

Here, sodium hydroxide (NaOH) is a strong base and acetic acid (CH3COOH) is a weak acid.

To learn more about neutralization reaction check the link below:

https://brainly.com/question/2632201

#SPJ4

Scope 3 emissions, also known as value chain emissions, are indirect GHG emissions both upstream and downstream of an organization’s main operations.

This normally means all of the emissions a company is responsible for outside of its operations from the goods it buys to the disposal of the products it sells.

With time passes out to make the drastic global emissions cuts required under the Paris Agreement, scope 3 offers a chance to drive rapid environmental engagement through supply chains, global and local businesses, local and national governments, and consumers.

There are various reasons beyond the urgent need for rapid global decarbonization that are driving organizations towards more accurate scope 3 emissions disclosure. Two of the key drivers are Science-Based Targets and Net-Zero pathways.

To know more about Scope-3:

https://brainly.com/question/29546969

#SPJ4

Answer:

b) answer. NaOH is a strong base, meaning it will dissociate basically completely in solution to form

N

a

+

and

O

H

−

ions in solution.

One mole of

O

H

−

ions is created for every mole of NaOH that is dissolved. If it's a .05 M solution of NaOH, then it can also be interpreted to be a .05M solution of

OH−.pOH

(The pH scale for bases) can be found by taking the negative logarithm of OH− concentration.

pOH = −log

[05M] = 1.3.

However, we are trying to find

pH

, so we must use the formula pOH+pH

=14 .Now that we know pOH

=1.3pH=14−1.3=12.7

.

The hydrogen ion concentration of a solution of ammonia depends on the concentration of the hydroxide ions in the solution.

The hydrogen ion concentration of a solution of ammonia with a hydroxide ion concentration of 6.25 x 10-8 mol/L can be calculated using the equation Kw = [H+] [OH-], where Kw is the ion product constant for water. Using this equation, [H+] can be calculated by rearranging to [H+] = Kw/[OH-] and substituting the given values. This gives [H+] = 1.0 x 10-14/6.25 x 10-8, which equals 1.6 x 10-7 mol/L. Therefore, the hydrogen ion concentration for the given solution of ammonia is 1.6 x 10-7 mol/L.

Other Questions Related hydroxide ions :

https://brainly.com/question/25883474?referrer=searchResults

https://brainly.com/question/14619642?referrer=searchResults

There is a law called conservation of energy which states that energy can neither be created nor be destroyed. It can be only transferred from one form to another form. Therefore, the correct option is option B.

Energy transfer is a phenomenon in which energy transfer from one matter to another matter. Energy can be transferred in two forms that are by doing work or by transferring heat.

Heat can be transferred by three ways conduction, convention and radiation. In conduction, when two object are in direct contact, transfer of molecules takes place. Kinetic energy is converted into thermal energy while  he practices his guitar.

Therefore, the correct option is option B.

Learn more about energy transfer, here:

https://brainly.com/question/18649915

#SPJ1

The number of atoms of X in its oxide is 2 and that of oxygen is 3. The number of oxygen atoms in the oxide be the valency of the element X. Hence, the valency of the element X is 3.

Valency of an atom is the number of electrons that have to be gained or lost from the atom to achieve octet. It is based on the number of valence electrons of the element.

If an element has 6 valence electrons, then it needs 2 more electrons to achieve octet hence, the valency is 2. Oxygen has a valency of 2 thus, it needs two electrons to be donated or shared by other atom.

The number oxygen in the oxide is the number of electrons required by the element X to achieve octet. Therefore, the valency of X is 3.

To find more on valency, refer here:

https://brainly.com/question/24709616

#SPJ1

Metal micro-particle leaching can occur if lemon juice comes into prolonged contact with metals or metallic containers (even metals like stainless steel grade).

For more information on metals kindly visit to

brainly.com/question/4701542

#SPJ4

The mass of one mole of a substance is equal to that substance's molecular weight.

The molecular weight of a substance is equal to its mass in one mole. Water, for example, has a mean molecular weight of 18.015 atomic mass units (amu), implying that one mole of water weighs 18.015 grams. In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance.

The mole is widely used in chemistry to express quantities of reactants and products of chemical reactions. The term gram-molecule was formerly used for "mole of molecules", and gram-atom for "mole of atoms".

To learn more about moles of substances, here

https://brainly.com/question/19711232

#SPJ4

Definite volume and shape represents solid, Indefinite shape and definite volume represents Liquid state, substances with an indefinite shape and an indefinite volume represents Gaseous state. The correct option to this is A.

For more information on states of matter kindly visit to

https://brainly.com/question/9402776

#SPJ1

The theoretical yield of aspirin that a student can prepare from 2.52 g of salicylic acid and excess acetic anhydride is 3.28 g.

The theoretical yield of aspirin that a student can prepare from 2.52 g of salicylic acid and excess acetic anhydride can be calculated using the following steps:

Calculate the moles of salicylic acid (SA):

Moles of SA = 2.52 g/138.12 g/mol = 0.01826 mol

Calculate the moles of acetic anhydride (AA):

Moles of AA = 0.01826 mol/1 mol = 0.01826 mol

Calculate the theoretical yield of aspirin (ASA):

Moles of ASA = 0.01826 mol x 1 mol/1 mol = 0.01826 mol

Convert the moles of ASA to grams:

Grams of ASA = 0.01826 mol x 180.15 g/mol = 3.28 g

Therefore, the theoretical yield of aspirin that a student can prepare from 2.52 g of salicylic acid and excess acetic anhydride is 3.28 g.

If the student obtains 1.71 g of aspirin, then the percent yield can be calculated using the following equation:

Percent Yield = (Actual yield/Theoretical yield) x 100

Percent Yield = (1.71 g/3.28 g) x 100 = 52.2%

For more questions like Theoretical yield click the link below:

https://brainly.com/question/11002641

#SPJ4

Complete question is attached below.

Between two CH3CF3 molecules, dispersion and dipole-dipole intermolecular forces exist.

Due to CH3CF3's polar nature, two of its molecules will interact via dipole-dipole interactions. Because dispersion forces exist between every molecule, they will also be present. The electrostatic forces between two permanently polar molecules are called dipole-dipole forces, or dipole-dipole interactions. The forces of attraction that occur between molecules are referred to as intermolecular forces (IMF), sometimes known as secondary forces. Intramolecular forces, such as the bonds between atoms, are those that exist within a molecule and hold it together. The interactions between molecules, or intermolecular forces, are what control many of a substance's physical characteristics.

To know more about intermolecular forces please click on the link brainly.com/question/9007693

#SPJ4

The volume of a 0.291 m solution of NaOH required to reach the equivalence point in a titration against 25 ml of a 0.350 m HCl solution is 27.50 ml.

This can be calculated using the formula VNaOH

= (25ml) × (0.350 M HCl) / (0.291 M NaOH).

The volume of a 0.291 m solution of NaOH required to reach the equivalence point in a titration against 25 ml of a 0.350 m HCl solution can be calculated using the following equation:

VNaOH = (25ml) × (0.350 M HCl) / (0.291 M NaOH) VNaOH

= 27.50 ml

Therefore, the volume of a 0.291 m solution of NaOH required to reach the equivalence point in a titration against 25 ml of a 0.350 m HCl solution is 27.50 ml.

When a titration is performed, the equivalence point is reached when the moles of the acid is equal to the moles of the base. For an acid-base titration, the equivalence point is determined by the stoichiometry of the reaction between the acid and the base. In this case, the reaction between the 0.350 m HCl and the 0.291 m NaOH is

HCl + NaOH → NaCl + H2O.

The ratio of HCl to NaOH is 1:1, which means that when the moles of HCl is equal to the moles of NaOH, the reaction is complete, and the equivalence point is reached.

Learn more about stoichiometry at : https://brainly.com/question/9743981

#SPJ4

The sample of argon gas that has the same number of atoms as a 100 mL helium gas at 1.0 atm and 300 is 100. mL at 1.0 atm and 300. The correct option is D.

The ideal gas equation is used to determine the number of moles of gases in each of the provided gas samples.

The ideal gas equation is: PV/RT = n

where;

P is pressure, V is volume, n is number of moles of gas, T is temperature of gas, R is molar gas constant = 0.082 atm.L/mol/K

Moles of gas in the given helium gas sample:

P = 1.0 atm, V = 100 mL or 0.1 L, T = 300 K

n = PV/RT

n = (1 x 0.1 )/ (0.082 x 300)

n = 0.00406 moles

1 moles = 6.02x 10 ²³ number of atoms

For the argon gas sample:

A.

n = PV/RT

n =  (1 x 0.05) / (0.082 x 300)

n = 0.00203 moles

B.

n = PV/RT

n =  (0.5 x 0.05) / (0.082 x 300)

n = 0.00102 moles

C.

n = PV/RT

n =  (0.5 x 0.1) / (0.082 x 300)

n = 0.00203 moles

D.

n = PV/RT

n =  (1 x 0.1) / (0.082 x 300)

n = 0.00406 moles

Therefore, the sample of argon gas that has the same number of atoms as a 100 mL helium gas at 1.0 atm and 300 is 100. mL at 1.0 atm and 300. The correct option is D.

Your question is incomplete but most probably your full question was

Which sample of argon gas has the same number of atoms as a 100.-milliliter sample of helium gas at 1.0 atm and 300. K?

A) 50. mL at 1.0 atm and 300. K

B) 50. mL at 0.5 atm and 300. K

C) 100. mL at 0.5 atm and 300. K

D) 100. mL at 1.0 atm and 300. K

Learn more about ideal gas equation at: brainly.com/question/24236411

#SPJ4

​

The organic compound is an alkyl chloride. The IUPAC name of the given compound is 4- methyl-pent-2-yne chloride.

For naming organic compounds, there are certain rules regarding the numbering of carbon atoms and naming of adding functional groups to the names.

The given compound is an alkyne with triple bond. The numbering of carbon atom is started from the triple bonded end. Hence there are 6 carbons in the long chain. The methyl branch is attached to the 4th carbon in the long chain and Cl group is attached to the 5th carbon.

The triple bond is between the second and third carbon atoms.Therefore, the IUPAC name of the compound is 4- methyl-pent-2-yne chloride.

To find more on the IUPAC rules, refer here:

https://brainly.com/question/11587934

#SPJ4

The molarity of sucrose c12h22o11 if 20g of it is dissolved in water to make the volume of the solution upto 2 Litres is 0.029 mol/L.

The moles of solute per liter of solution is measured as molarity. Molarity, also referred to as molar concentration, is denoted by the letter "M".

We divide the number of moles of solute by the total volume of liters of solution to determine the molarity of a solution.

For instance, when table salt is dissolved in water, water serves as both the solution and the solute. Sodium chloride weights 58.44 grams per mole. One molar solution, or 1M, is created by dissolving 58.44 grams of sodium chloride in one liter of water.

Molar mass of C₁₂H₂₂O₁₁ is

12(12) + 22(1) + 11(16)

= 342g/mol.

Molarity is defined as = Mass / Molar Mass × Volume.

Sugar (C₁₂H₂₂O₁₁) has a concentration of

20 / 342 2 = 0.029 mol/L.

To learn more about Molarity from given link

https://brainly.com/question/17138838

#SPJ4

skin contact, ingestion, and inhalation.Breathing and inhaling into to the lungs is known as inhalation.To ingest anything orally is to ingest it.When anything comes into close proximity to the skin, skin contact occurs.

The dangers associated with employing chemicals are referred to as chemical hazards.There are two categories of chemical dangers at work:Hazards to physical and chemical systems

Chemical and toxic compounds can cause a variety of physical and health risks, including irritability, sensitization, and carcinogenicity .

To know more about chemical exposure visit:

https://brainly.com/question/29548487

#SPJ4

Balloon A indicates accurately illustrates the effusion of a gas from the central balloon.

The root mean square velocity of orange molecules is greater. As a result, they travel faster than blue molecules. They are more easily able to escape from balloons than blue ones. As a result, balloon A (with less orange and more blue) indicates proper effusion.

The root means square velocity v is given by the formula v = (3RT/M)1/2, 

So,  

               v is proportional to (1/M)^1/2

The effusion rate is proportional to ( 1/M)^1/2

As a result, the rate of effusion is proportional to v. ( room means square velocity)

Relative rate of effusion for orange spheres compared to blue spheres

                                   = (v of orange / v of blue)

                                   = (495 m/s / 380 m/s)

                                   = 1.303

As an outcome, the relative rate of effusion is 1.303. (orange is 1.303 times more effused than blue).

As a result, they travel at a faster rate than blue molecules. They are more easily able to escape from balloons than blue ones.

To know more about the Effusion, here

https://brainly.com/question/8804761

#SPJ4

The best approach to determine whether a piece of pewter contains lead is to use a lead test kit from the hardware store. Here, a section of metal is swabbed with test chemicals to see if the color changes. Lead is typically indicated by pink or red kits.

30 percent lead and 70 percent tin were the main components of ancient pewter. When exposed to acidic foods, this type of pewter, often known as black metal, quickly leached away its lead.

It's vital to remember that early pewter contained a lot of lead. Due to lead's hazardous nature, everyday or frequent use caused the chemical to leak out of the plate and spoon.

To know more about pewter visit:-

https://brainly.com/question/29548863

#SPJ4

(CH3)2-CH-CH2-CH2-CH(OH)-CH2-CH2-COO-CH2-CH3 is formed when (CH3)2C═CHCH2COCH2CH2COOCH2CH3 is treated with H2 (2 equiv), Pd―C.

Palladium on carbon is used for catalytic hydrogenations in chemical synthesis. Examples include reductive amination, carbonyl reduction, nitro compound reduction, imine and Schiff base reduction, and debenzylation processes.

Palladium is a very selective metal for a wide range of hydrogenation reactions, including the selective reduction of a C=C double bond next to an aliphatic carbonyl. The Lindlar catalyst is a well-known example of increased palladium selectivity. Carbon atoms smash with a palladium atom, bringing them so close that chemical reactions are possible. The catalyst in "palladium-catalyzed cross coupling" is palladium. It "encourages" and "allows" individual carbon atoms to react.

To learn more about Hydrogenation reaction, here

https://brainly.com/question/14652727

#SPJ4

There are 118 known chemical elements in the periodic table as of today.

Periodic table, often referred to as The Periodic Table of Elements, is rows and columns of chemical elements which are organized by its atomic number, from the element with the lowest atomic number namely hydrogen, to the highest element with the highest atomic number called oganesson. The Periodic Table was first arranged and formulated by a Russian chemist Dmitri Mendeleev in 1869. Periodic table is an important tool to organize and arrange chemical properties for each elements listed in the periodic table and also to predict chemical reaction as well as how each elements relate and react with one another.

To learn more about periodic table visit: https://brainly.com/question/15987580

#SPJ4