which two questions can be used to identify criteria for how successful the design of an efficient high altitude drone is?

A. Can it reach an altitude of 8,000 m?
B. Will it cost more than the last drone design?
C. Does it improve efficiency by 35%
D. Does it also work at low altitudes?
E. Will it become more popular than the last drone design?

Answers

Answer 1

Answer:

Explanation:

Remark

Though you  do not know what height the previous drone reached, I would think reading 8000 m would be quite an accomplishment. Answer 1: A

B: I wouldn't pick B. Increased cost isn't going to contribute to design success.

C. If the efficiency is low to start with, increasing it some won't matter. On the other hand if the efficiency is moderate or good increasing it by 35% is a good thing. Let's hold on to this answer.

D: It has to work at low altitudes in order to work at high altitudes. I wouldn't pick D

E: Popularity is something you never know will happen. I think C is your best second answer.

Answer: A and C


Related Questions

As you ride a bicycle on the sidewalk with a speed of
6.4 m/s, a ball suddenly rolls out in front of you. You hit the brakes and
come to rest in 3.8 m. How much time does it take you to stop?

Answers

Answer:

1.2 seconds

Explanation:

distance = ((final speed + initial speed) * time)/2

Here given:

distance: 3.8 meterinitial speed: 6.4 m/sfinal speed: 0 m/s

Solving steps:

3.8 = ((0 + 6.4) * time))/2

3.8 = 3.2(time)

time = 3.8/3.2

time = 1.1875 seconds ≈ 1.2 seconds

A locomotive (toy) travels at a velocity of 25 m/s for 10 s, then at 10 m/s for 5 minutes. What is the total distance covered?
A).3250m B). 4257 m C). 5200 D). The answer is not given

Answers

The total distance covered by the locomotive (toy) during the first and second journey is 10500 meters.

D) The answer is not given in the Options.

What is the total distance covered?

Note that: Speed/velocity is distance traveled per unit time.

Speed = Distance ÷ time

Distance = velocity × time

Given that;

For the first journey,

velocity v = 25m/selapsed time t = 5min = (5×60)s = 300s

For the second journey,

velocity v = 10m/selapsed time t = 5min = (5×60)s = 300s

Distance covered in the first journey

Distance = velocity × time

Distance = 25m/s × 300s

Distance = 7500m

Distance covered in the second journey

Distance = velocity × time

Distance = 10m/s × 300s

Distance = 3000m

Total distance covered will be;

Total Distance = Distance covered in the first journey + Distance covered in the second journey

Total Distance = 7500m + 3000m

Total Distance = 10500m

Therefore, the total distance covered by the locomotive (toy) during the first and second journey is 10500 meters.

D) The answer is not given in the Options.

Learn more about speed here: brainly.com/question/7359669

#SPJ1

4. A weightlifter lifts a set of weights a vertical distance of 2 meters. If a constant net force of 350 N is exerted on the weights, what is the net work done on the weights?

Answers

Answer:

700 J

Explanation:

Work = Force * Distance

Work = 350 N * 2 M = 700 J

If a car travels 20 km at a speed of 20km/h, what will the speed be for the remaining 20km if the average speed of the journey is 24km/h?

Answers

Answer:

12

Explanation:

avarage speed = total distance/total time

our total distance is 40km

the first 20km speed was 20km/h, so the time os 1 hour here

for the next 20km, we dont have the time, so let the time here be = x

so total time is x+1 km/h

and total distance is 40km

and the avarage is 24km/h

so =>

[tex] \frac{40}{1 + x} = 24[/tex]

solve for x to find the time in the second 20km

so x=0.6

then find the speed of the second 20km by diving the distance on time =>

[tex] \frac{20}{0.6} = 12[/tex]

so the speed in the second 20km is 12km/h

PLEASE HELP QUICK GIVING AWAY 74 POINTS

add number: Mercury, Venus, Earth, Mars. Terrestrial, rocky.


add number: The spinning of a planet on its axis, causing day and night.


add number: A force of attraction that keeps planets orbiting the sun.


add number: A group of objects that orbit a star.


add number: The orbit of a planet around the sun. On Earth, one year.


add number: The idea of that the Earth and planets orbit the sun. A sun-centered view.


add: number: A rock that has entered Earth's atmosphere, leaving a streak of light in the night sky.


add number: Jupiter, Saturn, Uranus, Neptune. Gas giants.


add number: The theory the universe came forth from a single spot in an enormous explosion.


add number: Huge clusters of stars, gas, and dust bound by the force of gravity.

1.
Big Bang

2.
Doppler Effect

3.
Nebula

4.
Solar System

5.
Geocentric theory

6.
Heliocentric theory

7.
Gravity

8.
Galaxy

9.
Rotation

10.
Revolution

11.
Inner planets

12.
Outer planets

13.
Meteor

14.
Meteorite

15.
Meteoroid

add the right numbers to the things that say add number

Answers

Mercury, Venus, Earth, Mars. Terrestrial, rocky : 11

The spinning of a planet on its axis, causing day and night :9

A force of attraction that keeps planets orbiting the sun : 7

A group of objects that orbit a star : 8

The orbit of a planet around the sun. On Earth, one year : 10

The idea of that the Earth and planets orbit the sun. A sun-centered view : 6

A rock that has entered Earth's atmosphere, leaving a streak of light in the night sky : 13

Jupiter, Saturn, Uranus, Neptune. Gas giants : 12

The theory the universe came forth from a single spot in an enormous explosion: 1

Huge clusters of stars, gas, and dust bound by the force of gravity: 8

What is Galaxy?

The group of many stars along with interstellar gases, rocks and dust material.

Thus, the numbers are added in front of the sentences.

Learn more about galaxy.

https://brainly.com/question/24836631

#SPJ1

Thanks for helping!!!------>
a 15.3 g bullet moving with a speed of 372 m/s. Answer in units of kg · m/s.

Answers

Answer:

56.916  kg m/s

Explanation:

Convert g to kg        15.3 g =   .153 kg

.153 kg  *  372 m/s   = 56.916 kg*m/s

In a related practical activity, 2 litres of a gas were heated from 35 °C to 75 °C. If the pressure was kept constant, calculate the final volume of the gas.​

Answers

Answer:

2.26l

Explanation:

From the general gas equation:

P1V1/T1  = P2V2/T2

Since pressure remained constant we can say:

V1/T1  = V2/T2

so to convert to kelvin add 273 to both temperature values then we can say:

1 m^3= 1000 L

2l=0.002m^3

Then;

0.002/308=V/348

V=(0.002/308)348

Final volume=0.002259m^3

=2.6l(1 decimal place)

what is the planet's rotational speed from slowest to fastest?​

Answers

Answer:

Jupiter is the fastest whereas Venus is the slowest

Which of the following is NOT an example of evidence that can be used to support the theory of evolution?
A. DNA evidence
B. Embryonic structures
C. Anatomical structures
D. Similar appearances in modern day organisms

Answers

D. Similar appearance in modern day organism to is the right naswer

The flag in front of Century High School is attached to a pully. The upward tension on the rope is 15 newtons and the downward tension on the rope is 18 newtons. What is the magnitude and direction of the net force?
3 newtons upward
3 newtons downward

Answers

From the statement in the question, the resultant force is 3N downward.

What is the resultant force?

The term resultant force refers to a single force that will an effect tat is the same as that of the system of forces acting together.

Thus, if the upward force is 15 N and the downward force is 18 N, the resultant force will be; 18 N - 15 N = 3N downward.

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

where is the strongest force coming from on scissors

Answers

Answer:

the handle

Explanation:

What note is the sound wave below? (Assume the total time is 20 ms)​

Answers

Answer:

D3

Explanation:

To determine the note, you will have to find the frequency of that sound wave

frequency is no. of cycles or oscillation that occurs per second

so according to the question for 3 oscillations, it took 20ms which is 20 × 10^-3 seconds then for 1 second that'd be

3×10^3 ÷ 20 = 150 Hz

then the note corresponding to frequency is D3

Planetary Nebula/White Dwarf Stars - Little Ghost Nebula. Some red giant stars develop into planetary nebulas as their cores continue to contract, to increase in temperature, and to burn and vent the remaining gases into interstellar space. Eventually, the core collapses to the point where it is hot enough to ionize the vented gases, forming a relatively short-lived (~10,000-20,000 years) planetary nebula. The remaining core collapses into a white dwarf star. The vented materials from the planetary nebula play an important role in enriching the universe in elements with atomic weights less than 26 (forming the basis for carbon-based life like ourselves!). Which type of star will form a planetary nebula

Answers

Smaller stars, like our sun, die by ejecting their outer layers of gas into space, resulting in the formation of a planetary nebula.

How planetary nebula formed?

A planetary nebula is formed when a red giant ejects its outer atmosphere. A white dwarf is the carbon core of a star that has lost its photosphere.

This results in a one-of-a-kind and breathtaking creation known as a planetary nebula.

Smaller stars, like our sun, die by ejecting their outer layers of gas into space over a 10,000-year period, leaving behind the star's heated core.

Radiation from the white dwarf causes the gas to shine, resulting in a one-of-a-kind and stunning creation known as a planetary nebula.

The carbon core of a red giant that has evacuated its photosphere as a planetary nebula is a white dwarf.

Hence, Smaller stars, like our sun, die by ejecting their outer layers of gas into space type of star will form a planetary nebula

To learn more about the planetary nebula refer to:

https://brainly.com/question/1162533

#SPJ1

uppose you are an astronaut and you have been stationed on a distant planet. You would like to find the acceleration due to the gravitational force on this planet so you devise an experiment. You throw a rock up in the air with an initial velocity of 6 m/s and use a stopwatch to record the time it takes to hit the ground. If it takes 6.8 s for the rock to return to the same location from which it was released, what is the acceleration due to gravity on the planet

Answers

Answer:

g = -3.143 m/s²

Explanation:

To determine acceleration due to the gravitational force, it can be used the following formula:

v = v₀ + gt, where:

v₀ is the initial velocity;

g is acceleration due to gravity

t is the time to return to the point of origin

Determine the frequency of the radar wave. [Show all calculations, including the equation and substitution with units.]

Answers

The frequency of the radar wave is 4.166 Hz.

What is wavelength?

The wavelength is the distance between the adjacent crest or trough of the sinusoidal wave. The wavelength is the reciprocal of the frequency of the wave.

Wavelength λ = 1/f

A 0.12-meter-long electromagnetic (radar) wave is emitted by a weather station and reflected from a near by thunderstorm.

The radar wave travels double the distance 0.12 m.

λ = 2 x 0.12  = 0.24 m

Then, the frequency of the radar wave is

f= 1 / 0.24

f =4.166 Hz

Thus, the frequency of the radar wave is 4.166 Hz.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ1

Photovoltaic cells: a) have become more economical to produce and use over the past 25 years. b) are the most efficient means of converting solar energy to electricity. c) are currently only used in urban areas of highly developed countries. d) have only been adapted for use in small appliances.

Answers

Photovoltaic cells are the most efficient means of converting solar energy to electricity. Option b is correct.

What is a cell?

A cell is a voltage and current-producing device that consists of a single anode and cathode separated by an electrolyte.

One or more cells can make up a battery. One cell, for example, is one AA battery.

Light intensity on a solar cell is often measured in "suns," with one sun roughly equivalent to 1 kW/m².

Concentrated sunlight improves the ratio of current generated while the device is lighted vs when it is dark, hence enhancing output voltage and efficiency.

Photovoltaic cells are the most efficient means of converting solar energy to electricity.

Hence, option b is correct.

To learn more about the cell refer to:

https://brainly.com/question/3142913

#SPJ1

what is formula for distance

Answers

the formula for finding distance would be D = V x T ( distance = velocity multiplied by time )

Answer:

this is formula

Explanation:

A pulley system is used in an auto repair shop to lift a 200 kg engine block 1.5 m out of a car. The lower pulley is attached directly to the engine block, and there are 8 strands of rope attaching the lower pulley to the upper pulley. The repairman pulls through 12 m of rope in the process of lifting the engine block. How much work is done during this process

Answers

For a pulley system is used in an auto repair shop to lift a 200 kg engine block 1.5 m out of a car, work is done during this process is mathematically given as

w=3000J

What is the work is done?

Generally, the equation for work done is mathematically given as

W=mgh

Therefore

W=200*10*1.5

w=3000J

In conclusion, work done

w=3000J

Read more about work done

https://brainly.com/question/756198

#SPJ1

Two identical spring scales are each attached to a cord that is wrapped around a pulley. the two pulleys have identical mass

Answers

What is the question sorry.


A satellite with a mass of 120 kg fires its rocket thrusters, which give an impulse of 7440 kg-m/s. What was the total change in the velocity of the satellite — that is, what was the total AV?

A. 17 m/s
B. 88 m/s
C. 45 m/s
D. 62 m/s

Answers

From the calculation and the momentum of the body, the velocity is 62 m/s

What is momentum?

The term momentum refers to the product of mass and velocity. Now recall that the rate of change of momentum is equal to the impressed force.

Hence;

7440 kg-m/s = 120 kg * v

v= 7440 kg-m/s/120 kg

v =  62 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

A massless rod is attached to the ceiling by a string. Two weights are hung from the rod: a 0.4-lb weight at its left end and a 1.2-lb weight at its right end. The length of the rod is L and a string is attached (3L/4 from its left end) so that the rod (with attached weights) is horizontal. What is the tension in the string supporting the rod and the attached weights

Answers

The tension in the string supporting the rod and the attached weights is 7.11 N.

Tension in the string supporting the rod

The tension in the string supporting the rod and the attached weights is the sum of the weights supported by the strings.

T = (m1 + m2)g

where;

m1 and m2 are the two masses supported

0.4lb + 1.2lb = 1.6lb = 0.725 kg

T = 0.725 x 9.8

T = 7.11 N

Learn more about tension here: https://brainly.com/question/918617

#SPJ1

Why is the same side of the Moon always visible from Earth?


A.) The Moon does not rotate about its axis.


B.) The Moon does not revolve around Earth.


C.) The Moon takes the same time to rotate about its axis as it takes to orbit Earth.


D.) The Moon and the Earth take the same time to rotate about their respective axes.

Answers

Answer:

Explanation:

Answer

The true fact is that C is what happens in outer space.  Both rotations take 27.3 days.  

A: The exact opposite is true. It does rotate about it's axis.

B: Again this is just plain false. Given the way we observe it, the moon must be rotating around the earth.

D. they don't. 27.3 hours and 24 hours are not the same.

WILL GIVE BRAINLIEST IF YOU GET THEM ALL RIGHT!!! In this problem you shine a light on a square and you have to tell me which color the light will appear when shined on the square.

Answers

White color light falls on white object , it will appears black because it absorbs all the colors of spectrum.

White color light falls on red object , it will appears red because it absorbs all the colors of spectrum except red.

White color light falls on blue object , it will appears blue because it absorbs all the colors of spectrum except blue.

Red color light falls on white object , it will appears Red.

Red color light falls on Red object , it will appears Red.

Red color light falls on Green object , it will appears black.

Green color light falls on white object , it will appears green.

Green color light falls on Red object , it will appears black.

Green color light falls on Green object , it will appears green.

Purple color light falls on white object , it will appears Purple.

Purple color light falls on Red object , it will appears black.

Purple color light falls on Blue object , it will appears black.

What is white light?

White light is the light from the sunlight incident on the surface to appear their color.

Thus, for each colored light and colored square, appearing color is find out.

Learn more about white light.

https://brainly.com/question/16317768

#SPJ1

Which of the following energies is related to temperature change

Answers

Thermal energy is a type of energy that is related to temperature change. Details about thermal energy can be found below.

What is thermal energy?

Thermal energy refers to the internal energy of a system in thermodynamic equilibrium due to its temperature.

Thermal energy of a body is determined by the difference in temperature in the surrounding environment and the body.

Therefore, thermal energy is a type of energy that is related to temperature change.

Learn more about thermal energy at: https://brainly.com/question/11278589

#SPJ1

What is the KE of a 4500kg at a speed of 20 m/s?

Answers

Answer:

900kJ

Explanation:

The formula to find the kinetic energy is :

[tex]E_k=\frac{1}{2} mv^{2}[/tex]

Here,

m ⇒ mass ⇒ 4500 kg

v ⇒ velocity ⇒ 20 m/s

Let us find it now.

[tex]E_k=\frac{1}{2} mv^{2}[/tex]

[tex]E_k=\frac{1}{2} *4500*20^{2}[/tex]

[tex]E_k=\frac{1}{2} *1800000[/tex]

[tex]E_k=900000J[/tex]

[tex]E_k=900kJ[/tex]

just need help with this explain​

Answers

Answer:

B

Explanation:

mass is the amount of matter present in any object or body.

here in the option b, it says they each contain the same amount of matter,

which means they each has the same mass.

If you had to choose a theory that best represents your own view of development, would you choose a single theory or would you select components of several different theories? what aspect of your chosen theory (or theories) make it more attractive than others

Answers

I would select components of several different theories and the aspect which will be more attractive will be the one which has similarities and accurate.

What is a Theory?

This is defined as a proposed explanation for a particular phenomenon or occurrence.

Components of several different theories will bring different dimensions and factors to the occurrence which will help in its thorough analysis.

Read more about Theory here https://brainly.com/question/11555274

#SPJ1

A race car sits at the starting line on a racetrack. When the race starts, the car's tires exert a force on the track. According to Newton's third law of motion, WHAT PREVENTS THE RACE CAR FROM SINKING INTO THE TRACK?
A. The force of friction between the car tires and the track prevents the car from moving.
B. The track surface exerts a force that is larger and in the same direction as the force exerted by the tires.
C. A normal force that is equal in magnitude and opposite in direction to gravity pushes on the car.
D. The track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

Answers

To prevent the race car from sinking into the track,  the track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

What is Newton's third law of motion?

Newton's third law of motion states that force every action there is equal and opposite reaction.

That is the force exerted on an object is equal in magnitude to the reaction of the object.

Fa = - Fb

According to this law, Fa is equal to Fb in magnitude but the directions are different.

Thus, to prevent the race car from sinking into the track,  the track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

Learn more about Newton's third law of motion here: https://brainly.com/question/62770

#SPJ1

(
the average power transferred to the solar panels by sunlight is 26 000 w
calculate the average energy transferred to the solar panels in 30 seconde
use the equations
energy transferred = power time

Answers

Answer:

P = E / t       definition of power is energy / unit time

1 W = 1 Joule / sec      definition of 1 Watt of power

E = 2.6E4 J/s * 30 s = 7.8E5 Joules = 780,000 Joules

The average power transferred to the solar panels by sunlight is 26 000 w. The average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To calculate the average energy transferred to the solar panels in 30 seconds, we can use the equation:

Energy transferred = Power × Time

Given that the average power transferred to the solar panels is 26,000 watts and the time is 30 seconds, we can substitute these values into the equation:

Energy transferred = Power × Time

Energy transferred = 26,000 × 30

Energy transferred = 780,000 watt-seconds

Since the watt-second is equivalent to the joule (J), the energy transferred to the solar panels is 780,000 joules.

Therefore, the average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To know more about energy and power:

https://brainly.com/question/34423421

#SPJ5

Sherry and Ellen are talking about the factors that affect light scattering in the atmosphere. Sherry says one factor is the length of the path of sunlight. Ellen says one factor is altitude. Who is correct

Answers

Sherry who says one factor is the length of the path of sunlight is correct.

Factors affecting light scattering

There are two main factors which affects light scattering, and they include the following;

the size of the particles wavelength of the light

length of the path of sunlight is equivalent to wavelength of the light.

Thus, we can conclude that Sherry who says one factor is the length of the path of sunlight is correct.

Learn more about light scattering here: https://brainly.com/question/1381101

#SPJ1

Other Questions
What is literacy?the literal meaning of a wordthe use of a personal stylethe connection between wordsthe ability to read and write Can using pain relievers be dangerous?A. They are only dangerous if you go over the recommended dosage.B. Everyday use can be dangerous, especially without consulting a doctor.C. Alternating pain relievers prevents them from being dangerous. go to the movies tonight?A) How aboutB) Why don't weC) What aboutD) Let'sA Analyze Characters In the beginning of the story, Yeh-Shen is described as having beauty and goodness. What details about her thoughts and actions show her goodness? Of the equations listed below, which represent functions that are linear? 1.y = 3x II. y = 3x III. y A. Equations I and III B. Equation I only C. Equations II and III D. Equation II only For the polynomial function, find the requested value: f (x) = 10x2 4x 5; f (2) ANSWER FAST PLS! (For a project) State and describe three different ways that agricultural engineering (machines, tools, irrigation systems, pesticides, fertilizers, genetic modification) could be applied to help reduce the loss of wheat crops in drought conditions.Use complete sentences, proper capitalization & punctuationHave 3 sentences telling 3 different ways to help with the wheat crop during a drought Calculate the energy used by a radio of power 30W in 1 minute. essay on why school is important let x = -5/6 and y 4/3= . select all the expressions that have a positive value. select all that apply: a. x * y b. y/x c. x/y d. x + y e. x - y f. y - x Find the probability of rolling a 4 on a number cube and then choosing a red ball at random from a bag of 8 blue and 6 red balls. 1/14 1/6 2/21 19/42 What is the molar mass of HCO? Mr. Simmons figures he can paint his house in 5 days. If his son helps, together they can paint it in 2 days. How long will it take his son to paint the house if he works alone? If any of the underlined segments has an error, select the answer option that IDENTIFIES the error. If no segments have an error, select "No error."Bill, who has been my best friend since kindergarten, just married a woman, he met during his travels in Indonesia. different between effort and load What was alexander hamiltons position in george washingtons cabinet?. Determine the equation of the line with slope 3 that passes through the point M(1, 2).3x + y = 13x - y = -13x - y = 1Ox-3y=-1 When a behavior causes something undesirable to be taken away and the behavior is therefore more likely to be repeated in the future, the type of consequence used is called: Solve for x5x= -9Give your answer as an improperfraction in its simplest form. why is the answer to this integral's denominator have 1+pi^2