A commemorative coin is not an example of currency as commemorative coins are coins with a unique design that refers to the occasion on which they were issued and are issued to mark a specific event or issue.
What is a Commemorative coins?
Commemorative coins are coins with a unique design that refers to the occasion on which they were issued and are issued to mark a specific event or issue. Although some nations also produce commemorative coins for everyday use, many coins in this category are only intended for collectors.
Commemorative coins can be seen as being of one of three types:
Regular issue coinage, such as euro coins, are the typical coins intended for everyday use in commerce and are frequently issued with the same design for several years.Circulating commemoratives are meant to be used in commerce, but they will only be printed for a brief period of time to honor, among other things, a special occasion, an anniversary, a person, or a place. The €2 commemorative coin and the U.S. 50 State Quarters are two examples.Coins that are legal tender but are not intended for use in transactions to buy goods or services are known as non-circulating legal tender (NCLT). Instead, they are produced in gold or silver, either in uncirculated condition or with a proof finish, with the intention of serving as collector's items with numismatic value.To learn more about Coins, visit: https://brainly.com/question/13697187
#SPJ1
A wedge and a screw are similar because they both _____.
It increases force and modifies its direction at the same time, a moving inclined plane is a wedge, and a screw is a cylinder that has an inclined plane wrapped around it.
What are a wedge and a screw?A screw is a straightforward device connected to the inclined plane, much like a wedge.
Imagine an inclined plane wrapped around a cylinder to represent a screw, a cylinder that has an inclined plane.
The screw's threads are formed by this spirally inclining plane, an input force is applied to a screw when it is twisted into a piece of wood.
Therefore, a moving inclined plane is a wedge, and a screw is a cylinder that has an inclined plane wrapped around it.
Learn more about the screw, here:
https://brainly.com/question/14870064
#SPJ1
in the solidification process of steel, people add a large number of small particles of boron. what is the purpose of this addition? i. make the steel stronger ii. make the solidification time longer iii. make the material semiconducting iv. make the melting temperature higher
To increase the steel's hardenability in order to make it stronger. The quantity of boron needed to make a difference can be as little as 3 ppm, depending on the kind of steel and carbon content.
Steels are, in theory, binary systems made up of the host element iron and the alloying element carbon, with a maximum concentration of 2% carbon (any iron-carbon alloy with more than 2% carbon is known as cast iron!). Iron alone would be too soft to be used as a building material, thus the carbon gives the essential strength and hardness. A greater knowledge of the iron/carbon alloy system is necessary to be able to develop steels that meet these various needs (high hardness or high strength, or a compromise of both). Compared to a non-alloy steel, adding boron may dramatically enhance the hardness. The maximal hardness can be much greater than 380 HV for typical cooling speeds t8/5 up to around 10 s, and the microstructure's toughness can be decreased.
Learn more about Boron here:
https://brainly.com/question/9356683
#SPJ4
nitrogen gas at 60 kpa and 7 c enters an adiabatic diffuser steadily with a velocity of 275 m/s and leaves at 85 kpa and 27 c. determine (a) the exit velocity of the nitrogen and (b) the ratio of the inlet to exit area a1/a2.
The exit velocity of the nitrogen and (b) the ratio of the inlet to exit area a1/a2 is 0.8 g.
PI= 60 KPa
Vi= 275 m/sec
T1=280K
P2=85kpa
T2=300K
S1=0.2967kj/kg
Cp = 1.04 kalkg
S1=60 X 10³/0.2957x 10³x 280=0.73kg/m³
S2=P2/RT2=
85 x 10³/0.2967*10³*300
= 0. 9546 19/m³
h1+C1²/2000=h2 +C1²/2000
C2=184.45 SEC
S1A1C1=S2A2C2
A1/A2=0.88G
=0.8G
Atomic number 7 and the chemical symbol N belong to nitrogen. The lightest element in group 15, or the pnictogens, of the periodic table, nitrogen is a nonmetal. It is a typical element in the cosmos and is thought to be the seventh most abundant in the Milky Way and the Solar System. With an atomic number of 7, nitrogen is a chemical element. The chemical compound known as molecular nitrogen (N2) is made up of two tightly bound nitrogen atoms.
Learn more about Nitrogen here:
https://brainly.com/question/16711904
#SPJ4
tech a says that with simultaneous injection, the electronic injectors cycle twice for each camshaft revolution. tech b says that the actual injector operating time largely depends upon battery voltage. who is correct?
Both technicians, i.e., technician A and technician B are correct as per the given situation. The correct option is C.
What is electronic injector?The use of electronic fuel injection eliminates the need for a carburetor, which mixes air and fuel. EFI does exactly what it says. It uses electronic controls to inject fuel directly into an engine's manifold or cylinder.
The fuel pump in your car supplies it with pressurized fuel, and it can open and close many times per second.
When the injector is turned on, an electromagnet moves a plunger, allowing pressurized fuel to squirt out through a tiny nozzle.
The electronic injectors cycle twice for each camshaft revolution in simultaneous injection. The actual injector operating time is heavily influenced by battery voltage.
Thus, the correct option is C.
For more details regarding injector, visit:
https://brainly.com/question/14278715
#SPJ1
learn how to implement some of the legv8 instructions for a cpu, and how to build up a single cycle datapath circuit.
There are a few different ways to implement the legv8 instructions. One way is to use a simple logic circuit, another way is to use a microcontroller.
What exactly is LEGv8?
LEGv8 is a straightforward subset of the ARMv8 AArch64 architecture; it is a 64-bit architecture with 32-bit instructions. It contains 32 registers, each of which is 64 bits wide.
If you want to use a logic circuit, you will need to build up a single cycle datapath. This will require a few different components, including an ALU, a register file, and a control unit. The control unit will decode the instructions and control the flow of data through the datapath. If you want to use a microcontroller, you can find many different legv8 instruction sets online. You will need to find one that is compatible with your microcontroller, and then you can load the instructions onto the microcontroller.
To learn more about LEGv8
https://brainly.com/question/28851857
#SPJ4
which microphone preamplifier input impedance would be best for a microphone that has an output impedance of 100 ohms?
A microphone preamplifier with an input impedance of 1,000 ohms would be best for a microphone that has an output impedance of 100 ohms.
What is microphone preamplifier?
The electronic circuitry found inside a microphone or a different object or circuit to which the microphone is linked can both be referred to as microphone preamplifiers. The microphone preamplifier serves the same role in either scenario. A microphone preamplifier is a piece of sound engineering gear that gets a microphone signal ready for other gear to handle. Frequently, microphone signals are too weak to be adequately conveyed to equipment like mixing consoles and recording devices. Preamplifiers boost a microphone signal to line level by offering steady gain and reducing generated noise, which would otherwise cause the signal to be distorted. See Gain stage for more discussion on signal level. Informally, a microphone preamplifier is referred to as a mic preamp, micamp, preamp, mic pre, and pre.
To learn more about microphone preamplifier
https://brainly.com/question/15735185
#SPJ4
What is not one of the 3-stage parametric equalizer adjustments on a yaesu ft-dx10?.
The 3-stage parametric equalizer adjustments on a Yaesu FT-DX10 are high frequency, middle frequency, and low frequency.
What is parametric equalizer?
This illustration demonstrates how to create parametric equalizer filters. Digital filters known as parametric equalisers are used in audio to modify the frequency content of a sound input. By permitting adjustments to the gain, centre frequency, and bandwidth of each filter, parametric equalisers offer capabilities beyond those of graphic equalisers. Graphic equalisers, on the other hand, only let you change the gain of the each filter. Typically, second-order IIR filters are used to create parametric equalisers. These filters have the issue of having relatively wide ripple or transition areas due to their low order, and when multiple of them are combined in a cascade, they may overlap. The ability to create high-order IIR parametric equalisers is provided by Audio ToolboxTM. Such high-order designs provide each filter's shape much greater flexibility.
To learn more about parametric equalizer
https://brainly.com/question/27950429
#SPJ4
Which of the following is an example of an advantage that a modern inventory management system provides? More than one answer may be selected. Check All That Apply A. Automatic reordering occurs when inventory levels dip below a pre-established threshold. B. Production is scaled up or scaled down depending on the pace of orders received and the amount of inventory currently available. C. Competing products are quickly developed based on products that have shown initial success. D. RFID tags that are part of a GIS system are included with manufactured goods once assembly is
Automatic reordering occurs when inventory levels dip below a pre-established threshold.
What is modern inventory management?The process of tracking and managing your company's inventory as it is purchased, produced, stored, and used is known as inventory management.It controls the complete flow of goods, from procurement to sale, ensuring that you always have the appropriate numbers of the appropriate item at the appropriate location at the appropriate time. When the amount of stock on hand hits a pre-set reorder point, an automatic reordering system places an order for the product.A computer can provide an automatic reorder based on calculations for the reorder point and a perpetual inventory system. An order that is manually entered by a member organization signifies that it was not entered into an electronic order-routing or execution system.To learn more about inventory management refer
https://brainly.com/question/13439318
#SPJ4
a chip with a certain area designed using the 5-um process of the late 1970s contains 20000 mosfets. what does moore's law predict the number of transistors to be on a chip of equal area fabricated using the 32-nm process of 2013 ?
Moore's law predicts that the number of transistors on a chip of equal area fabricated using the 32-nm process of 2013 will be 430000
What is transistor?
The semiconductor device known as a transistor is used to switch or amplify electrical impulses. The transistor is one of the fundamental components of contemporary electronics. It has at least three terminals for connecting to an electronic circuit and is made of semiconductor material. The current flowing through another pair of a transistor's terminals is controlled by the voltage or current provided to one set of those terminals. A transistor can magnify a signal because the regulated (output) power can be greater than that of the controlling (input) power. Although many more transistors are found embedded in integrated circuits, some are packaged individually. Julius Edgar Lilienfeld, an Austro-Hungarian physicist, first presented the idea of a field-effect transistor around 1926, but it was not feasible to create a functional device at that time.
To learn more about transistor
https://brainly.com/question/27216438
#SPJ4
9.7 lab: dean's list students make the dean's list if their gpa is 3.5 or higher. complete the course class by implementing the get deans list() instance method, which returns a list of students with a gpa of 3.5 or higher.
The get deans list() instance method, which returns a list of students with a gpa of 3.5 or higher is written in python
class Student:
def __init__(self, first, last, gpa):
self.first.first = first.
self.last.last = last.
def get_g.p.a.(self):
return self.gpa
def get_last(self):
return self.last
def to_string(self):
return. self.first f + ' ' + self.last l ± ' (G.P.A: ' + str(self.g.p.a) + ')'
class Course:
def __init__(self):
self.roster = [].
def add_student(self, student):
self.roster.append(student)
def get_deans_list(self):
retur.[.x for x inn self.roster if x.gpa ≥ 3.5.]
if __name__ == "__main__":
course = Course()
course.add_student(Student('Henry', 'Nguyen', 3.5))
course.add_student(Student('Brenda', 'Stern', 2.0))
course.add_student(Student('Lynda', 'Robinson', 3.2))
course.add_student(Student('Sonya', 'King', 3.9))
deans_list = course.get_deans_list()
print("Dean's list:")
for student in deans_list:
print(student.to_string())
Learn more about list() here:
https://brainly.com/question/27279933
#SPJ4
Assuming a 1-KB page size, what are the page numbers and offsets for the following address references (provided as decimal numbers)? a. 21205 b. 164250
The page numbers and offsets of the following address reference are 1663 and 6595 respectively.
Given,
Page size= 1 (*KB) = 2n = 1024 = 210
So, the value of bits of offest part is n = 10
a. 21205
Binary Format = 101001011010101
This binary address is split into 2 parts, first is page no. and other part is page offset
Page no. : 01010010 = 82 (in decimal)
Page offset : 11010101 = 213 (in decimal)
b. 164250
Binary Format = 00101000000110011010
Page no. : 0010100000 = 160 (in decimal)
Page offset : 0110011010 = 410 (in decimal)
c. 121357
Binary Format = 00011101101000001101
Page no. : 0001110110 = 118 (in decimal)
Page offset : 1000001101 = 525 (in decimal)
d. 16479315
Binary Format = 111110110111010001010011
Page no. : 111110110111 = 4023( in decimal)
Page offset : 010001010011 = 1107 (in decimal)
e. 27253187
Binary Format = 0001100111111101100111000011
Page no. : 00011001111111 = 1663(in decimal)
Page offset : 01100111000011 = 6595 ( in decimal)
To learn more about Binary, visit: https://brainly.com/question/14914277
#SPJ4
Which of the following is thought of as a localizer approach system and is not aligned with the runway centerline?
A. MLS approach
B. LDA approach
C. None of the above
D. SDF approach
The MLS approach is thought of as a localizer approach system and is not aligned with the runway centerline.
What is runway centerline?
It is a part of the airport lighting system that helps aeroplanes navigate across the taxiways at night or in bad weather when it is difficult to see the runway clearly. The edge lighting, which consists of white lights on the both edges of the runway, marks the boundaries of the runway while the centerline lights on the runway indicate where the runways are in the middle, allowing the pilot to navigate safely. At 3,000 feet from of the end of the runway, all centerline lights in the runway stay white. The centerline lighting system just on runway typically has a white colour at the approaching the runway's end and transitions to alternating white or red lights throughout its length.
To learn more about runway centerline
https://brainly.com/question/15259219
#SPJ4
Consider the code below. What needs to be placed instead of ??? so that loop is run exactly 7 times?
public static void main(String args[]) {
int x = 7;
while( x > ??? ) {
System.out.println( x );
x--;
}
}
Question 4 options:
0
1
6
7
-1
The code provided will cause an infinite loop because the condition for the while loop will always evaluate to true. In order to make the loop run exactly 7 times, the condition should be x > 0.
What is code?
Computer code, or a set of instructions or a system of rules written in a specific programming language, is a term used in computer programming (i.e., the source code). It is also the name given to the source code after a compiler has prepared it for computer execution (i.e., the object code). Code is heavily used for cutting-edge ideas like artificial intelligence as well as machine learning, in addition to creating computer programmes and mobile applications. The next section will explain some additional applications and uses for the word code.
To learn more about code
https://brainly.com/question/17169621
#SPJ4
consider the following page reference string:
7,2,3,1,2,5,3,4,6,7,7,1,0,5,4,6,2,3,0,1.
Assuming demand paging with paging with three frames, how many page faults would occur for the following replacement algorithms?
a. LRU replacement
b. FIFO replacement
c. Optimal replacement
Assuming demand paging with three frames, the number of page faults that would occur for the following replacement algorithms are:
Using LRU Replacement Algorithm: 18 Page Faults.Using FIFO replacement Algorithm: 17 page FaultsUsing Optimal Replacement Algorithm: 13 Page Faults.What is demand Paging?
Demand paging is a way of managing virtual memory in computer operating systems. In a demand paging system, the operating system transfers a disk page into physical memory only if it is attempted to be accessed and the page is not already in memory.
The LRU page replacement method creates a new page by replacing the least recently used page in memory. The LRU page replacement technique is based on the idea that the least recently used page in memory will not be utilized for a long period.
The most basic page replacement technique is the FIFO Replacement Algorithm. In this technique, the operating system maintains a list of all pages in memory in a queue, with the oldest page at the top.
The best page replacement algorithm is optimal page replacement since it produces the fewest number of page defects. The pages that will not be utilized for the greatest period of time in the future are replaced by this algorithm.
Learn more bout page faults:
https://brainly.com/question/24128255
#SPJ1
what is difference between computer science engineering management and computer science engineering systems?
Answer:
A CS degree focuses on sequential programming and software design while a computer systems engineering degree divides the focus evenly between high-level and low-level programming.
Both are correlated to technology which makes it hard for the students to choose the best suitable course.
Explanation:
SOURCE: www.computersciencedegree.hub
Which of these is not an example of a cold-formed steel product?
A. Light-gauge C-channel
B. Steel deck
C. Steel tubing
D. Steel angle
E. Concrete prestressing strands
Steel angle is not an example of a cold-formed steel product.
What is steel?
In order to increase its strength and resistance to fracture in comparison to other kinds of iron, steel is an alloy composed of iron and often contains a few tenths of a percent of carbon. Many additional components could be included or added. An additional 11% chromium is often required for corrosion- and oxidation-resistant stainless steels. Steel is utilised in structures, infrastructure, tools, vehicles, machinery, electrical appliances, weaponry, and rockets due to its great tensile strength and low price. Steel's foundational metal is iron. It can take one of two crystalline (allotropic) forms, body-centered cubic or face-centered cubic, depending on the temperature. Steel and cast iron's variety of special qualities are a result of the interaction of the various iron allotropes with the alloying elements, primarily carbon.
To learn more about steel
https://brainly.com/question/26654853
#SPJ4
5. Technician A says that a direct report program is repair program that directly involves the insurar company, the repair shop, the original equipme manufacturer, and the agent that sold the polic Technician B says that blending an undamaged panel is also referred to as "fooling the custom Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
It can be inferred from the above that "Neither Technician A nor B is correct" (Option D). Note that blending an undamaged vehicle panel is required when there is very minimal damage or dent to the panel. In this case, the technician utilizes filling, spraying, and polishing to hide the dent. This is standard practice and is not considered fooling the customer.
What is a blend within the panel?When repairing a minor dent in a panel, the "blend inside panel" approach is frequently utilized. Blending is a method used on a non-repaired, undamaged panel to eliminate color differences between a refinished panel and the existing paint on surrounding panels.
The most typical blending process seen on insurance quotes is on bumpers and doors. Insurers pay half the restore time and then approve full clear, significantly cutting refinishing time by an hour for each repair.
From a 320-grit completed mended area, the repaired area still has to be brought up to refinish requirements.
Not only has a part of the refinish time been wasted, but extra operations are required to restore the panel to its original, undamaged state. Most estimate P pages include refinishing timelines for fresh, undamaged panels, rather than those that require preparation.
Learn more about damaged panels:
https://brainly.com/question/13543219
#SPJ1
BAND SAW SAFETY TEST PART 2,
The completed sentences with respect to carpentry tools are given as follows:
Use only a sharp blade with a proper set.When the blade is properly installed the teeth should point down.The blade should be adjusted so it runs 1/32 of an inch from the blade support wheel;Keep your hand at least two inches from the blade.Use a band saw when sawing small stock/pieces.Adjust the upper guide about 1/8 to 1/4 inches above the material being cut.Properly adjust the band saw blade so it will run on the center of the wheels.Move the upper guide only while the saw is stopped.The smallest radius that can be safely cut with a 1/2 inch wide blade is 1, 1/4 inchesA dull or improperly set blade will cause the blade to lean to one side on the workpiece.The name of the add-on tool we use to rip wood on the band saw is called a table saw.When you cross or cut angles on the band saw you use a Crosscut sled or cross-cut saw.What is the benefit of knowing the right carpentry tool to use?Because each instrument is precisely built for a specific function, selecting the appropriate tool will also reduce the amount of effort necessary to do a job correctly without causing harm to either the machinery or the material being worked on.
Many construction mishaps can be avoided by planning ahead of time.
Learn more about table saw:
https://brainly.com/question/28896152
#SPJ1
D
Question 4
As this is your first job working with databases, your manager wants you to familiarize yourself with all of the tables in the database. Therefore, he
asks you to produce a query for each table that displays all of the columns (fields) and all of the rows (records) using a separate SELECT query for
each table.
2 pts
Write a SQL query to display all the data in the Productss table. Run the query and answer the following questions. In answering these question you
must provide the responses exactly as they appear in the results. These are Case Sensitive. For example, if the field name is FirstName that is the
only correct answer. (First Name, firstname, Firstname are all incorrect)
1. What is the Number of Records:
2. Reading from left to right-the first field name is:
3. Reading from left to right-the third field name is:
4. Reading from left to right-the last field name is
Any collection of data or information that has been properly structured for quick search and retrieval by a computer is referred to as a database, often known as an electronic database.
What is electronic database?Databases are designed to make it easy to save, retrieve, edit, and delete data while carrying out various data-processing tasks. In response to queries, a database management system (DBMS) retrieves data from the database.Databases are briefly discussed after that. See computer science: Information systems and databases; information processing for a comprehensive explanation.A file or collection of files used to store a database. These files' contents can be divided up into records, each of which has one or more fields. The fundamental units of data storage are fields, and each field typically contains data related to one feature or attribute of the thing that the database is describing. Additionally, records are arranged into tables that contain details on the connections between their various fields. A database in the strict sense offers cross-referencing capabilities, despite the fact that the term "database" is used broadly to refer to any collection of information in computer files. Users can quickly search, rearrange, organize, and choose the fields in numerous records to access or produce reports on certain data aggregates using keywords and a variety of sorting instructions.
To Learn more About database Refer To :
https://brainly.com/question/518894
#SPJ1
Write a function, remove_string(s,
n)
, which removes characters from string s from 0 up to
n−1
and returns a new string. Note
n
is a positive integer. (
30pts
) Ex1) remove_string('abcdefg', 3) returns 'defg'. Ex2) remove_string('abcdefg', 10) prints 'too long:' Ex3) remove_string('abcdefg', 7) prints 'empty string'. Ex4) remove_string('abcdefg') returns 'abcdefg'.
Program for a Function written in c++ for remove string from the first string which are present in the second string
// C++ program to remove duplicates
#include <bits/stdc++.h>
using namespace std;
char* removeChars(char* s1, int n1, char* s2, int n2) // It is a function
{
int arr[26.] = {0.};
int curr = 0;
for (int.i==0; i < n.2; i++.)
arr[s2.[i] - 'a'] = -1.0;
for (int. i==0; i < n.1; i++.)
if (arr[s1[i.] - 'a'] != -1) {
s1[curr] = s1[i].; // i.e, second string
curr++; // in string
}
s1[curr] = '\0'; // end of string
return s.1;
}
// driver code.
int main()
{
char string1.[] = "geeksforgeeks";
char string2.[] = "mask";
int n1 = sizeof(string1.) / sizeof(string1[0]);
int n2 = sizeof(string2.) / sizeof(string2[0]);
cout << removeChars(string1, n1, string2, n2) << endl;
return 0;
}
Learn more about Function here:
https://brainly.com/question/28945272
#SPJ4
1) (5 pts) (abet: 2) given the dfa below, give a regular expression that describes the language that it recognizes.
2((0+1)(0+1)*2+2)* is a regular expression that describes the language that it recognizes.
What is a regular expression?
A regular expression is a string of characters that specifies a text search pattern. String-searching algorithms typically use such patterns for "find" or "find and replace" operations on strings, as well as input validation. In theoretical computer science and formal language theory, regular expression techniques are developed.
SA=\epsilon (Eqaution 1)
SB=SB(0)+SB(1)+SB(2) + SA(0) + SA(1) (Eqaution 2)
SC=SA(2)+SD(2)+SC(2) (Eqaution 3)
SD=SC(0+1) + SD(0+1) (Eqaution 4)
Using arden's expression on equation 5 we can write it as:
SD=SC(0+1)(0+1)* (Equation 5)
We need to find SC to get the regular expression as it is the final state.
We substitute equations into one another to get the answers.
Substituting Equation 1 to equation 3 we get:
SC=\epsilon(2) + SD(2) + SC(2)
SC = (2+SD(2)) + SC(2)
Substituting Equation 5 into it we get:
SC=2+SC(0+1)(0+1)*2+SC(2)
SC=2+SC((0+1)(0+1)*2+2)
Using arden's therorem we can write it as:
SC=2((0+1)(0+1)*2+2)*
Hence 2((0+1)(0+1)*2+2)* is the regular expression that this DFA recongnizes.
To learn more about regular expression
https://brainly.com/question/14469911
#SPJ4
technician a says that bearings have a soft surface that flows away from high spots in case of a nick in the crankshaft. technician b says that dirt can be absorbed into the crank- shaft journal surface. who is right?
Technician A is correct that bearings have a soft surface that flows away from high spots in case of a nick in the crankshaft.
In order to transform the reciprocating action of a piston engine into rotating motion, a crankshaft is a mechanical component used. The pistons are propelled by the connecting rods through the crankshaft, which is a rotating shaft with one or more crankpins. The internal combustion engine's main structural support comes from the crankshaft. The engine's correct operation and the transformation of a linear motion into a rotating motion are both handled by the crankshaft. To provide a long service life, crankshafts should have exceptionally high wear and fatigue resistance. The reciprocating motion of the pistons is transformed into rotational motion by a crankshaft, which is a spinning shaft. Commonly utilized in internal combustion engines, crankshafts are made up of a number of cranks and crankpins to which the connecting rods are fastened.
Learn more about crankshaft here:
https://brainly.com/question/6232350
#SPJ4
a data analyst inputs the following code in rstudio: change 1 <- 70 which of the following types of operators does the analyst use in the code? a. arithmetic b. assignment c. logical d. relational
An operator or concept used in programming that evaluates or defines a relationship between two entities is known as a relational operator. Equalities and inequalities in numbers are among them.
What does the C relational operator mean?An operator that examines relationships between operands does so. It yields a value of 1 if the relationship is true and a value of 0 if the relationship is false. Relational operators are employed in loops and decision-making.Two of the available values are compared using relational operators to determine the relationship between the two value pairs. Like equal to, better than, worse than, etc. The complete list of relational operators in the C language is as follows: the same.An operator or concept used in programming that evaluates or defines a relationship between two entities is known as a relational operator. Equalities and inequalities in numbers are among them.To learn more about Relational operators refer to:
https://brainly.com/question/28039937
#SPJ4
Calculate the total number of hosts per subnet that you can derive from the network ID 192.168.1.0 255.255.255.224.
a.
16
b.
30
c.
32
d.
24
The total number of hosts per subnet that you can derive from the network ID 192.168.1.0 255.255.255.224 will be 32.
What exactly is a network?
A network consists of two or more computers that are linked together to share resources (such as printers and CDs), trade files, or permit electronic communication. Computers on a network may be connected by cables, telephone lines, radio waves, satellites, even infrared laser beams.
Given,
IP address =192.168.1. 0
Subnet mask= 255.255.255.224
NID = IP
AND Subnet = 192.168.1.0
AND 255.255.255.224 =192.168.1.0
From this we can sya that it is C ipaddress
NID bits =24
NID + SID = 27 SID = 3
Host bits = 8-3 = 5
No of subnet= 2^3=8
Total no of host per subnet = 2^5=32
So, the correct answer is option c.
To learn more about network
https://brainly.com/question/29352369
#SPJ4
To select multiple entities in a Part Studio, press Shift or Ctrl (Cmd on a mac)on the keyboard.
To select multiple entities in a Part Studio we have to "click each entity with the left mouse button."
What is Part Studio?
With the Part Studios environment—a container for creating and editing parts, surfaces, curves, and sketches—Onshape has increased the potential of parametric design. Your Part Studios can be tailored to meet your design requirements with Custom Features written in FeatureScript.
Part Studios uses the strength of a single parametric history to create strong linkages between numerous parts and to enable real top-down design, eliminating the need to manage complicated file references in the early stages of a design. In assemblies, bills of materials, release management, and other downstream applications, parts created in a part studio are naturally handled individually.
To learn more about Part Studio, use the link given
https://brainly.com/question/25642085
#SPJ1
high gas flow rates . a. decrease the venturi effect b. decrease contamination c. provide better weld coverage d. waste shielding gases
The correct answer is d. waste shielding gases. therefore, the correct opyion is (d) option.
The two inert gases that are generally used for shielding gases are argon and helium. Helium is a less dense gas than argon which means that when helium is used, more cubic feet per hour are required than with argon. Lower voltages can be used with argon than with helium because it has a lower electrical resistance. Shielding gases are inert or semi-inert gases that protect the weld from damage as a result of contact with atmospheric gases. They affect the amount of heat produced by the arc and the appearance of the resultant weld bead.
To learn about Shielding gases click the link below:
brainly.com/question/28507171
#SPJ4
a weak entity set can always be made into a strong entity set by adding to its attributes the primary-key attributes of its identifying entity set. outline what sort of redundancy will result if we do so.
A weak entity set can always be converted into a strong entity set by simply adding to its attributes the primary-key attributes of its identifying entity set. But doing so will result in the redundant storage of the primary key.
Although a weak entity set can be transformed into a strong entity set by adding appropriate primary-key attributes, but this strategy results in the redundant storage of the primary key. Since the primary key of the weak entity set can be deduced from its relationship with the strong entity set, if we add primary-key attributes to the weak entity set, then they will be present in both the relationship set and the entity set that need to be the same, resulting in the redundant storage of the primary key.
You can learn more about database entities at
https://brainly.com/question/13437795
#SPJ4
calculate the percent yield of the product from bromination of cis-stilbene and the percent yield of the product from bromination of trans-stilbene.
Bromine and chlorine easily react with alkenes in addition reactions. This experiment involves brominating trans-stilbene with a 10% bromine dichloromethane solution. As a result, an addition reaction occurs, and 1,2-dibromo-1,2-diphenylethane is formed.
Step-by-step explanation:
stilbene + Br2 ----> PRODUCT(dibromostilbine)
No of moles of stilbene = 0.55/180.25 = 0.00305 mole
limiting reagent = stilbene
so that,
No of moles of PRODUCT = 0.00305 mole
massof product produced = 0.00305*260.25 = 0.793 gram
Theoretical yield = 0.793 gram
dibromostilbine molarmass = 260.25 g/mol
practical yield = 0.68grams
percent yield = practical yield /Theoretical yield *100
= 0.68/0.793*100 = 85.75%
Trans-stilbene acts as a nucleophile, while bromine acts like an electrophile. As a result, the bromine reagent electrophilically adds to the nucleophilic double bond. The Br-Br bond becomes polarized, and the more positively charged Br atom is transferred to the alkene, resulting in the formation of a bromonium ion.
Bromine addition begins on one side of the double bond (either side is equally likely, but only one option is chosen) and is followed by bromide ion attack on bromonium ion (again, attack could occur by carbon because the ion is symmetric, but only one option drawn). As shown above, the end result is a trans dibromide.
To learn more about Experiment, visit: https://brainly.com/question/23095194
#SPJ4
the following data are obtained when open-circuit and short-circuit tests are performed on a single-phase, 50-kva, 2400/240-volt, 60-hz distribution transformer.
With relatively little power given to the transformer and winding currents of the same size as during operation, a short-circuit test is performed to determine the transformer impedance and losses.
What is open-circuit test on a single phase transformer?One approach used in electrical engineering to ascertain the no-load impedance of a transformer's excitation branch is the open-circuit test, also known as the no-load test. The open circuit, which is shown on the right side of the picture as the "hole" or incomplete component of the circuit, is a representation of the no load.Impedance series is neglected:E1 = N1/N2 = E2=N1/N2 V2 = (2400/240) 240<° = 2400<0°V
N2 / N1 I 2 = 240 / 2400(4.85) = 0.485A
GC = P2 / E1 ² = 173 / (2400)² = 3.003 × (10 )-5 S.
YC = (N2 / N1 I2)/E1 = 0.485 /2400 = 2.021 × (10-)4S
BM = √Y²C - G²C = √(2.021 ×( 10)-4)² - (3.003 × (10)-5 )² = 1.998 × (10 )-4 S
YC = GC - JBM = 3.003 × (10) -5 - j1.998 × (10)-4 S
= 2.021 × (10) -4 < -81.45°S.
To Learn more About short-circuit test refer to:
https://brainly.com/question/27809868
#SPJ4
Write a program that gets a list of integers from input, and outputs non-negative integers in ascending order (lowest to highest).
Ex: If the input is:
10 -7 4 39 -6 12 2
the output is:
2 4 10 12 39
For coding simplicity, follow every output value by a space. Do not end with newline.
A program that gets a list of integers from input, and outputs non-negative integers in ascending order
#include <stdio.h>
#include <stdlib.h>
int main(void) {
int num;
int *arr = NULL;
int size = 0;
int capacity = 0;
while (scanf("%d", &num) == 1) {
if (size == capacity) {
if (capacity == 0) {
capacity = 1;
} else {
capacity *= 2;
}
arr = realloc(arr, sizeof(int) * capacity);
}
arr[size] = num;
size++;
}
for (int i = 0; i < size - 1; i++) {
for (int j = 0; j < size - 1 - i; j++) {
if (arr[j] > arr[j + 1]) {
int temp = arr[j];
arr[j] = arr[j + 1];
arr[j + 1] = temp;
}
}
}
for (int i = 0; i < size; i++)
What is integer?
The collection of the whole numbers or negative numbers is known as an integer in mathematics. Integers, like whole numbers, do not include the fractional portion. Integers can therefore be defined as numbers that can be positive, negative, or zero but not as fractions. On integers, we can carry out all arithmetic operations, including addition, subtraction, multiplication, and division. Integer examples include 1, 2, 5, 8, -9, -12, etc. "Z" stands for an integer. Let's now go over the definition of integers, their symbol, types, operations, laws, and properties, as well as how to display them on a number line with numerous worked-out examples.
To learn more about integer
https://brainly.com/question/13906626
#SPJ4