Braided channel forms are likely to develop when aggradation greatly exceeds erosion.
A braided channel is divided into lower channels by temporary islets called eyots. pleated channels form in gutters with a significant quantum of sedimentary cargo, a steep profile, and where discharge regularly fluctuates. the braided channel consists of a network of swash channels separated by small, frequently temporary, islets called pleat bars or, in English operation, aits or eyots.
Braided aqueducts tend to do in gutters with high deposition loads or coarse grain sizes, and in gutters with steeper pitches than typical gutters with straight or maundering channel patterns. They're also associated with gutters with rapid-fire and frequent variation in the quantum of water they carry, i.e., with" flashy" gutters and with weak banks.
To learn more about braided channels,
https://brainly.com/question/7593478
Which of the following factors is most important when determining the type of collision that forms when two plates collide?
The most important factor when determining the type of collision when two plates collide is the relative plates’ velocities. So the correct option is c.
If the plates are moving past each other at the same rate, it is known as a transform boundary, and the collision type will be strike-slip. During this type of collision, the plates move horizontally past each other, causing seismic activity such as earthquakes. The collision type is determined by whether the plates are moving past each other, interacting with each other, or converging in the same direction.
If the plates are moving towards each other but at different rates, it is known as a convergent boundary, and the collision type will be either a subduction zone or a collisional boundary. A subduction zone occurs when one plate slides underneath the other, causing the formation of mountains and volcanoes. A collisional boundary occurs when the two plates collide head-on, causing the formation of a mountain range.
Finally, if the plates are moving in opposite directions, it is known as a divergent boundary, and the collision type will be either a rift or spreading. A rift occurs when the plates pull apart, creating a valley. Spreading occurs when two plates move in opposite directions and create new oceanic crust.
Learn more about rift at : https://brainly.com/question/19624302
#SPJ4
a.the density of each plate
b.the size of each plate
c.relative plates’ velocities
d.the length of the boundary
what force that change the earth surface
Gravity and erosion are major factors in changing the shape of the surface of Earth.
Answer:
Gravity and erosion
Explanation:
Question 4
Consider this diagram.
(6x+30)
(8x+10)
Given: m/CEA (8z + 10); m/AED (6x +30)
Prove: == 10
Part A
Mr. Avila asked his students to write either a two-column proof or a paragraph proof for the question shown.
Student A and Student B each made a mistake in their proof. Identify each student's mistake and the step in which they
made it.
Type your response in the box.
The angles m∠CEA and m∠AED are supplementary thus the value of x will be 10 has been proved.
What is an angle?An angle is a geometry in plane geometry that is created by 2 rays or lines that have an identical terminus.
The identical endpoint of the two rays—known as the vertex—is referenced as an angle's sides.
m∠CEA and m∠AED are only two angles on a straight line thus they will be supplementary.
Therefore,
m∠CEA + m∠AED = 180°
8x + 10 + 6x + 30 = 180
14x + 40 = 180
14x = 140
x = 10
Hence "The value of x will be 10 has been proven since the angles m∠CEA and m∠AEDare complementary".
For more about the angle,
brainly.com/question/13954458
#SPJ1
Russia’s primary economic activities
Answer:
Russia's primary economic activities include agriculture, manufacturing, and the extraction of natural resources such as oil and natural gas. Russia is one of the world's leading producers of oil and natural gas, and the energy sector plays a significant role in the country's economy. Other major industries in Russia include the automotive, aerospace, and defense industries. Russia is also a major producer of agricultural products such as wheat, potatoes, and dairy products.
turn off the map layer and look at the area around mcintyre. you should see very blue pools to the west of town. zoom out a little and look further to the west and you will see many more of these pools. now look at the mine symbols near these pools. what is the commodity being mined in these locations? be sure to look specifically at the symbols that are on or very near the pools for this answer.
Kaolin clay's chemical composition. The initial kaolin clay samples contained 28.77 percent aluminum oxide and more than 50 percent silica.
Additionally, iron, titanium, calcium, sodium, potassium, and magnesium oxides can be found in kaolin clay.
Is kaolin a salt of aluminum?A hydrated aluminum silicate, kaolin It occurs naturally as a clay that is washed with water to remove sand and other impurities for pharmaceutical use.
How does kaolin sand work?China clay, also known as kaolin, is a type of commercial clay that is mostly made of the hydrated aluminosilicate clay mineral kaolinite. The whiteness of kaolin and the controllable, fine particle size of the mineral determine its commercial value.
To learn more about Kaolin clay's here
https://brainly.com/question/29675891
#SPJ4
Full Question = turn off the map layer and look at the area around mcintyre. you should see very blue pools to the west of town. zoom out a little and look further to the west and you will see many more of these pools. now look at the mine symbols near these pools. what is the commodity being mined in these locations? be sure to look specifically at the symbols that are on or very near the pools for this answer. Sand Kaolin Gravel Aluminum.
three words to remember for abs braking are.... group of answer choices stomp, stay and steer stop, drop and roll stop, look and listen duck, cover and hide
Three words to remember for ABS braking are stomp, stay and steer.
What is ABS braking?ABS braking or anti-lock braking system is a braking system that implemented in a car to avoid lock up wheels when hard braking or sudden braking occurs.
The modern ABS braking system use a computer to receive information from sensors and then to control the anti-lock brakes.
The often words that people use for ABS braking is stomp, stay and steer which it mean for stomp on the brake, stay on the brake, and steer normally.
Learn more about ABS braking here:
brainly.com/question/14318250
#SPJ4
In astronomy what does the word satellite refer to?
A moon, planet, or machine that circles a planet or star is referred to as a satellite. Earth, for example, is a satellite since it circles the sun. Similarly, because it circles Earth, the moon is a satellite. The term "satellite" usually refers to a mechanism that is sent into space and orbits Earth or another body in space.
What exactly is a satellite, and what does it do?A satellite is any object that circles another object, such as the Earth orbiting the sun. Hundreds of satellites are in service. They serve a variety of functions, including weather forecasting, television signal transmission, amateur radio and internet communications, and the Global Positioning System. They are also utilized for study and data collection by looking outward into the solar system. A rocket is often used to propel satellites into orbit. They are positioned at various heights and travel at various speeds around the Earth. Once in orbit, the Earth's gravitational pull prevents the satellite from straying too far into space.
To learn more about satellites, click
https://brainly.com/question/9266911
#SPJ1
Which of the following statements concerning earthquake damage or earthquake-associated phenomena is FALSE?
Group of answer choices
Tsunamis most often occur along convergent subduction zones rather than divergent spreading zones or oceanic transform boundaries.
Human activities, like dam construction and subsurface fluid injection can trigger damaging and even deadly earthquake events.
Although population density obviously affects earthquake death tolls, the building designs and materials used in an area are also important.
Buildings built on loose sediment tend to be safer than those built on brittle bedrock as the sediment helps to reduce earthquake energy.
Although tsunami and earthquake warning systems can help reduce death tolls, they are of limited use close to an earthquake’s epicenter.
Answer:
Buildings built on loose sediment tend to be safer than those built on brittle bedrock as the sediment helps to reduce earthquake energy.
Explanation:
The Amazon river holds 10
times more water than the
Mississippi river, and empties
into the Atlantic Ocean. What
feeds this massive river?
• hundreds of different river systems
• a giant, underground reservoir
• snows from the Andes mountains that melt each spring
What feeds this massive river is hundreds of different river systems
What is the Amazon river?It is quite a large body of water, it runs from west to east in the northern region of South America.
Before emptying into the Atlantic Ocean, the river system travels through Ecuador, Colombia, Venezuela, Bolivia, and Brazil from its source in the Andes Mountains of Peru.
The Amazon River is the world's second-longest river and the largest in terms of watershed size, number of tributaries, and volume of water discharged into the sea. There is no bridge that spans the entire length of the river.
The staggering variety of mammals, birds, amphibians, and reptiles that can be found throughout the biome is equally impressive.
Learn more about the Amazon river here:
https://brainly.com/question/486940
#SPJ1
using the figure, what is the temperature range to produce low-grade regional metamorphic rock?
Metamorphic rocks form one of the three great divisions of rock types. They are distinguished from igneous rocks, which form from molten magma, and sedimentary rocks.
With a little rise in temperature (over 200 °C) and noticeably increased directional pressure, regional low-grade metamorphism occurs. In contrast to hydrostatic pressure, directed pressure or stress only works in one direction. When minerals in rocks recrystallize as a result of this type of high pressure, new plates, such as those with elongated and leaf-like crystals, are formed. The longest surface of the new minerals is parallel to the pressure direction (Figs 6.2 and 6.3). The major characteristic of low-grade metamorphosed schist is this orientation of the minerals, or schistosity, and the fundamental characteristic of lepidoblastic and nematoblastic structure is the slips and sticks of these minerals.
Learn more about metamorphic here:
https://brainly.com/question/19930528
#SPJ4