Which of the following statements regarding triacylglycerols is not true? a. They are solid if they do not have alkene bonds. b. They are soluble in water. c. They are liquid if they have alkene bonds. d. They undergo alkaline hydrolysis to yield soaps.
e. Some can be hydrogenated.

The Gibbs Free Energy at 298 K for the reaction of nitrogen and hydrogen to form ammonia is -149.2128 kJ/mol. Since this value is negative, it indicates that the reaction is spontaneous under standard conditions (i.e., at 298 K and 1 atm pressure)

The Gibbs Free Energy is one of the most important thermodynamic functions used to determine whether a chemical reaction is spontaneous or not at a given temperature and pressure. It is represented by the symbol "ΔG" and is defined as the difference between the enthalpy (ΔH) and entropy (ΔS) of a system at a constant temperature and pressure. The formula for Gibbs Free Energy is: ΔG = ΔH - TΔS, where T is the temperature in Kelvin (K).

The reaction of nitrogen and hydrogen to form ammonia can be represented by the following chemical equation: N2(g) + 3H2(g) → 2NH3(g)

To calculate the Gibbs Free Energy at 298 K for this reaction, we need to know the standard enthalpy change (ΔH°) and the standard entropy change (ΔS°) for the reaction. These values can be found in a standard thermodynamic data table or by using Hess's Law to calculate them from known enthalpies of formation.

For this reaction, the standard enthalpy change is -92.2 kJ/mol and the standard entropy change is +191.6 J/mol-K. Therefore, we can calculate the Gibbs Free Energy at 298 K using the formula:

ΔG° = ΔH° - TΔS°

= (-92.2 kJ/mol) - (298 K)(0.1916 kJ/mol-K)

= -92.2 kJ/mol - 57.0128 kJ/mol

= -149.2128 kJ/mol

Thus, the Gibbs Free Energy at 298 K for the reaction of nitrogen and hydrogen to form ammonia is -149.2128 kJ/mol. Since this value is negative, it indicates that the reaction is spontaneous under standard conditions (i.e., at 298 K and 1 atm pressure).

To know more about Gibbs Free Energy refer here: https://brainly.com/question/29753420#

#SPJ11

The  ion(s) would NOT be present in the net ionic equation will be[tex]Pb^{2+[/tex], [tex]NO^{3-}[/tex]

Option (a) is correct.

To determine which ions would not be present in the net ionic equation, we need to identify the spectator ions. Spectator ions are the ions that do not participate in the chemical reaction and remain unchanged throughout the reaction.

The net ionic equation represents the chemical equation after removing the spectator ions. We can determine the spectator ions by comparing the initial and final compounds and identifying which ions remain the same on both sides of the reaction.

Let's analyze the given reaction:

[tex]Pb(NO_3)_2(aq) + 2KI(aq)[/tex] → [tex]PbI_2(s) + 2KNO_3(aq)[/tex]

The balanced equation shows that [tex]Pb^{2+[/tex] and [tex]2NO_3^-[/tex] ions combine with 2K+ and 2I- ions to form [tex]PbI_2(s)[/tex] and [tex]2KNO_3(aq)[/tex]. In the reaction, the [tex]NO_3^-[/tex]ions are part of both the starting compound [tex](Pb(NO_3)_2)[/tex]and the product compound [tex](KNO_3)[/tex]. Therefore, the [tex]NO_3^-[/tex] ions are spectator ions and would not be present in the net ionic equation.

Now, let's consider the answer choices:

A) [tex]Pb^{2+}, NO_3[/tex]-: [tex]NO_3^-[/tex] ions are spectator ions, so this option is correct.

B) [tex]K+, NO_3[/tex]-:[tex]NO_3^-[/tex] ions are spectator ions, so this option is correct.

C) [tex]K^+, Pb^{2+}[/tex]: Both [tex]K^+[/tex] and [tex]Pb^{2+}[/tex] ions participate in the reaction, so this option is incorrect.

D) [tex]K^+, I^-[/tex]: Both [tex]K^+[/tex] and[tex]I^-[/tex] ions participate in the reaction, so this option is incorrect.

Therefore, the correct answer is:

A) [tex]Pb^{2+}, NO_3^-[/tex]

To know more about net ionic equation

https://brainly.com/question/30381134

#SPJ4

Answer:

N₂O

Explanation:

Empirical formula is defined as the simplest whole number ratio of atoms presents in a molecule

For a nitrogen oxide that contains 63.66% of nitrogen, the percent of oxygen must be:

100-63.66 = 36.34% Oxygen

This percent is the percent in mass. To solve this question we must convert the mass of each atom to moles in order to find the simplest whole number ratio:

Moles of the atoms:

N = 63.66g * (1mol / 14g) = 4.547 moles N

O = 36.34g * (1mol / 16g) = 2.271 moles O

The ratio N:O is:

4.547 moles N / 2.271 moles O = 2

That means there are 2 atoms of N per atom of O and the empirical formula is:

Answer:

An allele is a variant form of a gene. Some genes have a variety of different forms, which are located at the same position, or genetic locus, on a chromosome. Humans are called diploid organisms because they have two alleles at each genetic locus, with one allele inherited from each parent.

Answer:

See explanation

Explanation:

Oxidation half equation;

3Cd(s) + 6OH^-(aq) ------> 3Cd(OH)2(s) + 6e

Reduction half equation;

2MnO4^-(aq) + 8H^-(aq) + 6e --------> 2MnO2(s) + 4H2O(l)

Balanced reaction equation;

3Cd(s) + 6OH^-(aq) + 2MnO4^-(aq) + 8H^-(aq)  ------> 3Cd(OH)2(s) + 2MnO2(s)

Number of electrons transferred = 6

if the halo of our galaxy is spherically symmetric and has a constant mass density, the mass density remains the same at all radii within the halo. This assumption simplifies the calculation, allowing us to consider a uniform mass density throughout the spherically symmetric halo.

If the halo of our galaxy is spherically symmetric, we can make certain assumptions about its mass distribution. Let's consider a simplified model where the halo has a constant mass density throughout its volume.

In this case, the mass density (ρ) represents the amount of mass per unit volume. To calculate the mass density, we divide the total mass of the halo by its volume. However, since we do not have the specific values for the total mass or the volume, we will express the mass density in terms of an equation.

Let's denote the total mass of the halo as M and the volume of the halo as V. The mass density (ρ) is then given by:

ρ = M / V

Since we assume the halo is spherically symmetric, we can use the formula for the volume of a sphere:

V = (4/3)πr³

where r represents the radius of the sphere.

To obtain the mass density as a function of the radius (ρ(r)), we need to find an expression for the total mass (M) in terms of the radius.

Assuming a constant mass density throughout the halo, the mass (M) enclosed within a sphere of radius r is given by:

M = ρ * V = ρ * (4/3)πr³

Substituting this expression for M into the equation for mass density, we have:

ρ(r) = (ρ * (4/3)πr³) / ((4/3)πr³)

Simplifying the equation, we find that the mass density is constant and independent of the radius:

ρ(r) = ρ

Therefore, if the halo of our galaxy is spherically symmetric and has a constant mass density, the mass density remains the same at all radii within the halo. This assumption simplifies the calculation, allowing us to consider a uniform mass density throughout the spherically symmetric halo.

To know more about density

https://brainly.com/question/31965795

#SPJ4

In a dissolving metal reduction, ammonia serves as a solvent, and each sodium atom acts as an electron donor. As a result, the alkyne is reduced to give an alkene product.

Dissolving metal reduction is a technique used to reduce alkynes to alkenes using an alkali metal, such as lithium or sodium, in liquid ammonia. During this process, the alkali metal dissolves in liquid ammonia to produce a deep blue color, which is a result of electrons being released from the alkali metal.

This process results in the formation of an intermediate solution containing free electrons that act as strong reducing agents, which can reduce the alkyne to an alkene. Therefore, in this reaction, ammonia serves as a solvent, while each sodium atom acts as an electron donor, leading to the reduction of the alkyne to form an alkene product.

Finally, we can say that in a dissolving metal reduction, ammonia serves as a solvent, and each sodium atom acts as an electron donor. As a result, the alkyne is reduced to give an alkene product.

Learn more about dissolving metal reduction here:

https://brainly.com/question/31672934

#SPJ11

The IUPAC names of the following organic compounds are correct with the given naming conventions:A. Pent-3-eneB. Prop-1-en-2-yneC. 1-methylpropaneD. All are incorrect - This is the incorrect option because all the given options have correct IUPAC names of the organic compounds. Hence, option D is incorrect.

The International Union of Pure and Applied Chemistry (IUPAC) is an organization that establishes a set of rules for the naming of chemical compounds. This is done to make sure that all scientists in the world use the same names for the same compounds. Therefore, the names should be unique and unambiguous. The IUPAC name of a compound provides information about its molecular structure, functional groups, and substituents. Some of the examples are given below:A. Pent-3-ene - It is a five-carbon molecule with a double bond between the third and fourth carbons. Hence, the name of the compound is pent-3-ene.B. Prop-1-en-2-yne - It is a three-carbon molecule with a triple bond between the first and second carbons and a double bond between the second and third carbons. Hence, the name of the compound is prop-1-en-2-yne.C. 1-methylpropane - It is a three-carbon molecule with one methyl group attached to the first carbon. Hence, the name of the compound is 1-methylpropane.

To know more about IUPAC name visit:

https://brainly.com/question/17926265

#SPJ11

The comparison between an electrical circuit and a water circuit can be helpful in understanding the concepts and principles of electricity by drawing parallels with a familiar system like the flow of water.

In both circuits, the potential energy or pressure that drives the flow is represented by voltage or PSI. Just as pipes provide a path for water to flow, conductors in an electrical circuit provide a path for electricity. The pump in a water circuit acts as the source of energy, similar to a battery in an electrical circuit. Both valves and switches control or regulate the flow by either opening or closing the circuit or pathway. Restrictions in a water circuit and resistance in an electrical circuit impede the flow and reduce the overall current or flow rate. The water meter and ammeter measure the flow rate or current passing through the circuit. Water itself in a water circuit and electrons in an electrical circuit act as carriers of energy. The high-pressure output and positive voltage represent the part of the circuit with higher potential energy, while the low-pressure intake and negative voltage represent the part with lower potential energy. When a valve is closed, it corresponds to an open circuit, interrupting the flow or current. Conversely, when a valve is open, it can be compared to a closed circuit, allowing the flow or current to pass through. The flow rate in a water circuit, measured in liters/second, is similar to the current in an electrical circuit, measured in amps.

Learn more about circuit here : brainly.com/question/12608516
#SPJ11

Answer:

b because  i said so

Explanation:

Answer:

When baking soda reacts with vinegar, one of the products produced is the gas carbon dioxide.

Answer:

The product left behind is carbon dioxide.

Answer:  [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]

Explanation:

[tex]HF\rightarrow H^+F^-[/tex]

 cM              0             0

[tex]c-c\alpha[/tex]        [tex]c\alpha[/tex]          [tex]c\alpha[/tex]  

So dissociation constant will be:

[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]

Give c= 0.056 M and [tex]\alpha[/tex] = ?

[tex]K_a=1.45\times 10^{-7}[/tex]

Putting in the values we get:

[tex]1.45\times 10^{-7}=\frac{(0.056\times \alpha)^2}{(0.056-0.056\times \alpha)}[/tex]

[tex](\alpha)=0.0016[/tex]

[tex][H^+]=c\times \alpha[/tex]

[tex][H^+]=0.056\times 0.0016=8.96\times 10^{-5}[/tex]  

Thus [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]

Answer:

please give me brainlist and follow

Explanation:

Contamination of ground water can result in poor drinking water quality, loss of water supply, degraded surface water systems, high cleanup costs, high costs for alternative water supplies, and/or potential health problems. The consequences of contaminated ground water or degraded surface water are often serious.

The correct statements are:

1. The reaction would be faster because bromide is a better leaving group.

2. The reaction would be slower because the C-Br bond is weaker than the C-Cl bond.Therefore, the correct options are B and D.

A student uses a-bromoacetic acid instead of a-chloroacetic acid for the reaction.

The reason why 12 M HCl is added to the reaction mixture after the reaction was completed in the Williamson Ether Synthesis lab is to protonate the carboxylate group of the product, thus causing it to precipitate.

The rate of the reaction is not dependent on the nature of halogen used in the reaction, so option A is incorrect. C-Br bond is weaker than the C-Cl bond, hence option B is correct. Bromide ion is a better leaving group than chloride ion, hence option C is correct.

As bromide ion is a better leaving group, it is easier to remove it from the substrate, and hence, the reaction would be faster. C-Br bond is weaker than C-Cl bond, hence the bond breakage would be easier and the reaction would be faster.

The C-Cl bond is weaker than the C-Br bond, hence the bond breakage would be easier and the reaction would be faster. Therefore, option E is incorrect.

To know more about leaving group click on below link:

https://brainly.com/question/31501459#

#SPJ11

To determine the value of ΔSo (change in entropy) for the given reaction, we need to consider the difference in the number of moles of gas between the reactants and the products.

Reactants:

2 moles of C2H2 (g)

5 moles of O2 (g)

Products:

4 moles of CO2 (g)

2 moles of H2O (l)

The change in the number of moles of gas is given by Δn = (moles of gas in products) - (moles of gas in reactants).

Δn = (4 moles of CO2 + 2 moles of H2O) - (2 moles of C2H2 + 5 moles of O2)

= 4 - 2 + 2 - 5

= -1

The ΔSo value can be calculated using the equation ΔSo = ΣnΔSo(products) - ΣnΔSo(reactants).

Since Δn is -1, we have:

ΔSo = (4 mol x ΔSo(CO2) + 2 mol x ΔSo(H2O)) - (2 mol x ΔSo(C2H2) + 5 mol x ΔSo(O2))

Assuming the standard entropy values, we have:

ΔSo = (4 mol x 213.7 J/(mol·K) + 2 mol x 69.9 J/(mol·K)) - (2 mol x 200.8 J/(mol·K) + 5 mol x 205.0 J/(mol·K))

= 122.3 J/K

Therefore, the value of ΔSo for the given reaction is +122.3 J/K.

Learn more about entropy here : brainly.com/question/20166134
#SPJ11

Answer:

Cell division is the process by which a cell, called the parent cell, divides into two cells, called daughter cells.[1] When the cell divides, everything inside it divides also. The nucleus and the chromosomes divide, and the mitochondria divide also.

In mitosis, an ordinary body (somatic) cell divides to make two daughter cells.

In meiosis, a cell divides twice, to produce four gametes (sex cells). The first division of meiosis is a special kind of cell division called a reduction division because the number of chromosomes is halved. The second division of meiosis is similar to mitosis.[2]

Three types of cell division: left is binary fission as in bacteria; right are mitosis and meiosis as in eukaryotes.

Cells are the 'building blocks' of life, and cell division is a basic feature of life. For simple unicellular organisms like Amoebozoa, one cell division reproduces the entire organism. On a larger scale, cell division can create offspring from multicellular organisms, such as plants that grow from cuttings. But most importantly, cell division enables organisms that are able to sexually reproduce to develop from the one-celled fertilised egg (zygote). Cell division also allows for continual renewal and repair of the organism.

The cell division is completed in the four phases prophase, metaphase, anaphase, and telophase.

It is the process by which cells divide into daughter cells. This keeps the cell organism to survive.

The five facts about cell division are:

Therefore, the cell division is completed in the four phases prophase, metaphase, anaphase, and telophase.

Learn more about cell division:

https://brainly.com/question/725029

Answer:

The structures in the cell work together to perform its life functions

Explanation:

Answer:

What statement best explains how life functions a unicellular organism are carried out?​

Explanation:

I'm hoping the same for my new coaching classes

This is my first time going out to study ngl-

Answer:

neutral

Explanation:

There are three basic subatomic particles. These are;

A neutron has no charge unlike the proton and the electron. It is present in the nucleus and contributes to the mass of the atom.

The term "atomic theory" is used instead of "atomic hypothesis" because it signifies the evolution and acceptance of the concept over time.

While Democritus initially proposed the idea of atoms in 400 BCE, it was merely a hypothesis without substantial experimental evidence. Over centuries, scientific investigations and advancements led to a deeper understanding of atomic structure and behavior.

The term "atomic theory" acknowledges that the concept of atoms has undergone refinement and modification based on experimental evidence and theoretical developments.

It recognizes that the understanding of atoms has evolved from a speculative hypothesis to a well-established scientific theory supported by extensive experimental observations, mathematical models, and empirical data.

The term "theory" conveys the comprehensive and validated nature of our understanding of atoms, encompassing their complex structures and behavior.

To know more about atomic theory, refer here:

https://brainly.com/question/28853813#

#SPJ11

Answer:86.84

Explanation:

The mass of barium in 288 mg of barium arsenate (Ba3(AsO4)2) is approximately 0.462 mg.

The molar mass of Ba3(AsO4)2 can be calculated by summing the atomic masses of each element in the compound. The atomic masses are as follows:

Barium (Ba): 137.33 g/mol

Arsenic (As): 74.92 g/mol

Oxygen (O): 16.00 g/mol

Molar mass of Ba3(AsO4)2:

= (3 * 137.33 g/mol) + (2 * (74.92 g/mol + 4 * 16.00 g/mol))

= 411.99 g/mol + 207.84 g/mol

= 619.83 g/mol

Now, we can calculate the mass of barium in 288 mg of barium arsenate using the molar mass and the given mass.

Mass of barium:

= (mass of barium arsenate / molar mass of barium arsenate) * molar mass of barium

= (288 mg / 619.83 g/mol) * 411.99 g/mol

= 0.462 mg

The mass of barium in 288 mg of barium arsenate (Ba3(AsO4)2) is approximately 0.462 mg.

To know more about molar mass visit:
https://brainly.com/question/31545539

#SPJ11

Answer:

You can better relate to the air temperature.

Explanation:

Fahrenheit gives you almost double the precision of Celsius without having to use decimals.

Iron is the limiting reagent because it is completely used up in the reaction.

option B.

The chemical expression for the reaction between iron and oxygen is:

4Fe(s)  +  3O₂ (g)   2Fe₂O₃ (s)

The number of moles of iron = mass of Fe/ molecular mass of Fe

The number of moles of Fe = 56 g/ 55.845 g/mol

The number of moles of Fe = 1.002 moles of Fe

The number of moles of oxygen = mass of oxygen/ molecular mass of oxygen

The number of moles of oxygen = 156 g /32 g/mol

The number of moles of oxygen = 4.875 moles of oxygen

Assume that Fe is the limiting reactant, the number of Fe₂O₃ can be calculated as:

moles of Fe₂O₃ = 1.002 mole of Fe × 2 moles of Fe₂O₃/ 4 moles of Fe

moles of Fe₂O₃ = 0.501 mole of Fe₂O₃

Assume that O₂ is the limiting factor, the number of Fe₂O₃ is:

moles of Fe₂O₃ = 4.875 moles of O₂ × 2 moles of Fe₂O₃/ 3 moles of O₂

moles of Fe₂O₃ = 3.25 mole of Fe₂O₃

Thus, after the reaction is complete, Fe and O₂ contain different moles of Fe₂O₃. Only Fe gets consumed in the reaction and it is the limiting factor.

Learn more about limiting reagents here: https://brainly.com/question/14222359

#SPJ4

The complete question is below:

exactly 56 grams of iron is mixed with 156 grams of oxygen. the elements are heated and they react. which choice best describes what remains after the reaction is complete?

a. oxygen is the limiting reagent

b. iron is the limiting reagent

c. both are limiting reagent

d. none is limiting reagent

Answer:

Am I supposed to answer these on brainly?

Explanation:

To determine the pH and [OH-] of a sodium phosphate solution, several steps need to be followed. The balanced equation for the reaction between sodium phosphate and water should be written, and the equilibrium constant (K) for the hydrogen phosphate ion (HPO_{4} ^{-2}) should be obtained. Using an I.C.E. table, the [OH-] can be calculated. From there, the hydronium ion concentration ([[tex]H_{3}O^{+}[/tex]]) can be determined, leading to the calculation of the pH.

The balanced equation for the reaction between sodium phosphate (Na_{3}PO_{4}) and water ([tex]H_{2}O[/tex]) can be written as follows:

[tex]Na_{3}PO_{4}[/tex] + H_{2}O ⇌ 3Na+ + [tex]PO_{4} ^{-3}[/tex] + H_{2}O

To determine the equilibrium constant (K) for the hydrogen phosphate ion (HPO_{4} ^{-2}), the K of the dihydrogen phosphate ion ([tex]HPO_{4} ^{-}[/tex]) is needed. This can be found in reference materials. Next, an I.C.E. (Initial, Change, Equilibrium) table can be set up to calculate the concentration of hydroxide ions ([OH^{-}]) in the solution. By knowing the concentration of sodium phosphate, the concentration of PO_{4} ^{-3}can be determined at equilibrium.

From the [[tex]OH^{-}[/tex]], the hydronium ion concentration ([H_{3}O^{+}]) can be calculated using the Kw (ionization constant for water) equation: Kw = [H_{3}O^{+}[OH^{-}] = 1.0 x 10^-14 at 25°C. Finally, the pH can be determined by taking the negative logarithm (base 10) of the [H_{3}O^{+}]. By following these steps, the pH and [OH^{-}] of the sodium phosphate solution containing 33 g of [tex]Na_{3}PO_{4}[/tex] per liter can be calculated using the appropriate units and significant figures.

Learn more about ions here: https://brainly.com/question/968488

#SPJ11

The combustion of 9.8 moles of methanol will produce 352.8 grams of water.

First, let us look at the balanced equation of combustion of methanol:

[tex]2CH_3OH(l)+3O_2(g)-- > 2CO_2(g)+4H_2O(l)[/tex]

The ratio of number of moles of methanol burned and that of water produced is 1:2.

Thus, 9.8 moles of methanol will produce 19.6 moles of water.

Mass of 19.6 moles water = 19.6 x 18 = 352.8 grams

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

Answer:

c

Explanation:

1. litmus paper is used when showing a change between a greater range in ph levels - so A and D are automatically a no.

2. methyl red is used to show a range in ph levels between 4.8-6

3. Option C is the only one left so im going to assume its C because its definitely not A, B, or D

The infrared wavelengths of the electromagnetic spectrum encompasses infrared light with an emission wavelength of 1580 nm (nanometers).

The term near-infrared radiation is frequently used to describe it. The infrared light's greater wavelength range is indicated by its wavelength of 1580 nm.

Thermal imaging, remote sensing, and communication systems can all benefit from infrared radiation's capacity to interact with molecular vibrations and permeate certain materials.

Thus, we keep three significant figures by writing the wavelength as 1580 nm in order to accurately describe the value.

For more details regarding wavelength, visit:

https://brainly.com/question/31143857

#SPJ1