Answer:
D. The pressure of the gas decreases!
Explanation:
According to Boyle's Law, there is an inverse relationship between the volume of a gas and its pressure!
So, if the volume of a gas increases, its pressure will decrease; the same thing will happen if the pressure of the gas increases -- the volume will decrease!
↑P↓V and ↓P↑V <---- this is what it would look like visually!!
Hope this helps! :)
When the volume of a gas increases then the pressure of the gas decreases.
What is ideal gas equation?Ideal gas equation is a hypothesis which tells about the behavior of gas in different conditions and it will be represented as:
PV = nRT
From this equation it is clear that pressure and volume are inversely proportional to each other:
P ∝ 1/V
Means if pressure increases ten volume decreases or if pressure decreases then volume increases.
Hence option (4) is correct.
To know about ideal gas equation, visit the below link:
https://brainly.com/question/25290815
Pure hydrogen (H₂) is a hazardous substance. Thus, safer and more cost effective techniques have been developed to store it as a solid for shipping purposes. One such method is the reaction below, which occurs at 200 °C.
Answer: hello your question has some missing details attached below is the missing details
answer : 25.5% ( B )
Explanation:
Determine percentage yield
molar mass = 35 g/mol
mass of Li₃N(s) = 70 g
product LiH(s) = 8.0 g ( actual yield )
theoretical yield ( LiH ) = 4 * 7.95 = 31.8 g
percentage yield = actual yield * 100 / theoretical yield
= 8 * 100/31.8
= 25.5%
Considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
compare with the temperature at the end of the change?
Answer:
The temperature on the graph is higher at point 5 than at point 1. The correct answer is the last answer choice that you showed.
Explanation:
The temperature at point 1 is -10 degrees Celsius, while the temperature at point 5 is 120 degrees Celsius. This is a 1300% increase.
See the calculation here: https://www.calculatorsoup.com/calculators/algebra/percent-change-calculator.php?v_1=-10&v_2=120&action=solve
I hope this helps.
Will give Brainliest and 20 points
Answer:
k = 1.26 x 10^-12
Its extremely small.
It follows that when k is small... The equilibrium concentration of Reactant is large and More than Product.
Option C should be your answer
1.4 Which one of the following does not fit in with the rest?
A a layer of oil on water
B cream on milk
C С water on top of the syrup in a cooldrink mixture
D a plank floating on water
Answer:
D a plank floating on water
Explanation:
Its not a mixture
hyy guys.... can you plz writ me a journal plz ..... connection with science... any topic will be done today is my submition
ur best try is to copy and paste and change some words.
Describe the chemical reaction based on the chemical equation below. Also, explain whether the equation is balanced. NH3(g)+o2=NO(g)+H2O(I)
Answer:
2 moles of ammonia gas (NH₃) reacts with 5/2 moles of oxygen gas (O₂) to produce 2 moles of nitrogen monoxide gas (NO) and 3 moles of liquid water (H₂O)
Explanation:
The chemical equation is:
NH₃(g) + O₂(g)⇒ NO(g) + H₂O(I)
First, we have to distinguish which are reactants and which are products.
Reactants ⇒ left side: NH₃ (ammonia gas) and O₂ (oxygen gas)
Products ⇒ right side: NO (nitrogen monoxide) and H₂O (water)
Thus, ammonia gas reacts with oxygen gas to produce nitrogen monoxide gas and liquid water.
The reaction is not balanced, because it does not has the same number of atoms of each chemical element in both sides. To balance, we have to write a coefficient of 3 for H₂O, then a coefficient of 2 for NH₃ (to balance H atoms), then a coefficient of 2 for NO, and finally a coefficient of 5/2 for O₂ (to obtain 5 atoms of O in both sides):
2 NH₃(g) + 5/2 O₂(g)⇒ 2 NO(g) + 3 H₂O(I)
According to the balanced equation, 2 moles of ammonia gas (NH₃) reacts with 5/2 moles of oxygen gas (O₂) to produce 2 moles of nitrogen monoxide gas (NO) and 3 moles of liquid water (H₂O).
how many grams are represented by 1.45 moles of Koh? Determine your answer to the correct number of significant figures.
Answer:
[tex]\boxed {\boxed {\sf 81.4 \ g\ KOH}}[/tex]
Explanation:
We are asked to convert 1.45 moles of potassium hydroxide (KOH) to grams.
1. Molar MassThe molar mass is the mass in grams of 1 mole of a substance. The values are found on the Periodic Table. They are the same as the atomic masses but the units are grams per mole (g/mol) instead of atomic mass units (amu).
We have the compound KOH. Look up the molar masses of the individual elements.
Potassium (K): 39.098 g/mol Oxygen (O): 15.999 g/mol Hydrogen (H): 1.008 g/molThe formula for the compound has no subscripts, so there is 1 mole of each element in 1 mole of the compound. We can simply add the molar masses.
KOH: 39.098 + 15.999 + 1.008 =56.105 g/mol2. Convert Moles to GramsBased on the molar mass, there are 56.105 grams of KOH in 1 mole. Create a ratio using this information.
[tex]\frac {56.105 \ g\ KOH}{ 1 \ mol \ KOH}[/tex]
We are converting 1.45 moles of KOH to grams, so we multiply by this value.
[tex]1.45 \ mol \ KOH *\frac {56.105 \ g\ KOH}{ 1 \ mol \ KOH}[/tex]
The units of moles of KOH cancel.
[tex]1.45\ *\frac {56.105 \ g\ KOH}{ 1 }[/tex]
[tex]81.35225 \ g\ KOH[/tex]
3. RoundThe original measurement of moles has 3 significant figures, so our answer must have the same.
For the number we calculated, that is the tenths place. The 5 in the hundredths place (81.35225) tells us to round the 3 up to a 4.
[tex]81.4 \ g\ KOH[/tex]
Approximately 81.4 grams of potassium hydroxide are represented by 1.45 moles.
Which force pulls earth and the sun toward each other?
Answer:
the correct answer is gravity
Answer:
the gravitational pull so gravity (b)
¡A que clasificación corresponden las sustancias que están formadas por un mismo tipo de átomos, es homogénea y no puede descomponerse por medios químicos?
Answer:
Elementos.
Explicación:
Los elementos son las sustancias puras que están formadas por el mismo tipo de átomos, es homogéneo y no se puede descomponer por medios químicos. El elemento tiene el mismo tipo de átomos que son similares en tamaño y forma. Es un tipo de materia pura que tiene solo un tipo de átomos y no se puede descomponer más porque no está hecha de dos sustancias, es solo una sustancia, por eso no se puede descomponer por medios químicos.
What happens to the hydrogen ion (H+) concentration as an aqueous
solution becomes more acidic? *
A)decreases
B)increases
C)remains constant
D)cannot be determined
Answer:
Explanation:
It can be determined by measuring the Ph. D is incorrect.
C: is wrong because if you are making something acidic, you are increasing the H+
B: is the correct answer.
A: pH decreases. H+ increases which makes the Ph decrease. It is an oddity of the formula that makes this happen.
What type of experiment did the student in the passage perform?
Answer:
Passage?
Explanation:
which of these elements has two valence electrons?
a. hydrogen (H)
b. barium (Ba)
c. nitrogen (N)
d. krypton (Kr)
e. bromine (Br)
Help!! Please explain how you get the answer
Answer:
5 moles
Explanation:
First, write out the balanced equation:
2Al + Fe₂O₃ → Al₂O₃ + 2Fe
Reaction ratio of Al to Fe₂O₃ is:
2 : 1
This means 2 moles of Al will react with 1 mole of Fe₂O₃
Al: 5 mol
Fe₂O₃: 3 mol
Multiply the reaction to get moles of both reactants you have:
2 : 1 (×⁵/₂) = 5 : ⁵/₂
2 : 1 (×3) = 6 : 3
In other words, 5 moles of Al will react with ⁵/₂ moles of Fe₂O₃;
And 3 moles of Fe₂O₃ will react with 6 moles of Al;
But, we do not have 6 moles of Al, therefore only the 5 moles of Al available will react;
5 moles of Al reacts with ⁵/₂ moles of Fe₂O₃, as we can see from the ratios we calculated above, the remaining ¹/₂ mole of Fe₂O₃ will not react;
We say that Al is the limiting reactant because all the Al will react but all the Fe₂O₃ does not (i.e. it is in excess);
Next and last, the reaction ratio of Al to Fe is:
2 : 2 or, more simply 1 : 1
This means the moles of Al that reacts is the equal to the moles of Fe produced from the reaction;
We've established that 5 moles of Al will react with ⁵/₂ moles of Fe₂O₃, so 5 moles of Fe will also be produced (since the ratio is 1 : 1);
You could also work this out using the moles of Fe₂O₃ that react;
The reaction ratio of Fe₂O₃ to Fe:
1 : 2
So the moles of Fe produced is 2× the moles of Fe₂O₃;
If ⁵/₂ moles of Fe₂O₃ reacts, then simply multiply this by 2 which is 5 moles
If the pressure of a 2.00 L sample of gas is 50.0 kPa, what pressure does the gas exert if its volume is decreased to 20.0 mL?
Which equation should you use?
__________________________________________________________
Which equation should you use?
B. P₁V₁=P₂V₂
What is the new pressure?
✔ 5000 kPa
__________________________________________________________
Explanation:The problem gives initial volume (2.00 L), final volume (20.0 mL), and initial pressure (50.0 kPa). Then it asks to find the final pressure. Answer B has all these variables, with P₁=initial pressure, P₂=final pressure, V₁=initial volume, and V₂=final volume. Plug the given values into the equation and then solve for the unknown value, which is P₂, final pressure.
When plugging in the values, use consistent units. 2L=2000 mL, I chose to make the consistent unit in mL. You'll get the same answer if you choose to use L as the consistent unit.
[tex]2000*50=20*P2[/tex]
[tex]100000=20*P2[/tex]
Divide both sides by 20
[tex]100000/20=(20*P2)/20[/tex]
[tex]5000=P2[/tex]
Here's a photo of Edge just incase.
What is the gram molecular mass of a compound if 5 moles of the compouns has a mass of 100 grams?
Answer:
20 grams.
Explanation:
5 mols of a compound has a mass of 100 grams
1 mol of the same compound has a mass of 100/5 = 20 grams
A dunk of water holds 550,200 grams of water. How many moles of water are in the tank?
Answer:
12
Explanation:
there are 12 because of the desnity
How many moles are in 2.11 x 1014 molecules of LiBr?
Answer: There are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.
Hence, moles in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr are calculated as follows.
[tex]Moles = \frac{2.11 \times 10^{14}}{6.022 \times 10^{23}}\\= 12.71 \times 10^{-9}[/tex]
Thus, we can conclude that there are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
In explosive combustion the rapid expansion of --------------- causes explosion and the production of ------------------
Answer:
Volume; high temperature and pressure
Explanation:
In an explosive combustion the rapid expansion of the volume causes explosion and the production of high temperature and pressure.
The substance is usually in a confined place and the expansion usually reaches a breaking point in which it is expelled from the space usually accompanied with a loud noise and high amount of temperature and pressure change thereby releasing its gas constituents.
6. You have a sample of H2Ois, with a mass 23.0 grams at a temperature of 46.0
temperature water would be in what state? Use reference table on page 492 for specific heat
capacity of ice). How many kilojoules of heat energy are necessary to carry out each step? Also
calculate the total amount of energy needed.
a) heat the ice to 0.0 °C?
Answer: I think it would be -23
Explanation:
La columna de la izquierda corresponde a los tipos de sales y la columna derecha a los tipos de fórmula que presentan. Relacionar con el mismo COLOR las parejas correspondientes. 1. Hidracidas a. MX 2 Acidas b. MXO 3. Oxacidas c. MHXO 4. Basicas d. M(OH)XO
Answer:
1. Hidracidas a. MX
2 Acidas c. MHXO
3. Oxacidas b. MXO
4. Basicas d. M(OH)X
Explanation:
¡Hola!
En este caso, de acuerdo con el concepto de sal, la cual está generalmente dada por la presencia de al menos un metal y un no metal, es posible encontrar cuatro tipos de estas; hidrácidas, oxácidas, básicas y ácidas, en las que las primeras dos son neutras pero la segunda tiene presencia de oxígeno, la tercera tiene iones hidróxido adicionales y la cuarta iones hidrógeno de más.
Debido a la anterior, es posible relacionar cada pareja de la siguiente manera:
1. Hidracidas a. MX
2 Acidas c. MHXO
3. Oxacidas b. MXO
4. Basicas d. M(OH)XO
En las que M se refiere a un metal, X a un no metal, H a hidrógeno y O a oxígeno.
¡Saludos!
does salt affect the boiling time of water?
Answer:
Yes
Explanation:
Yes, but almost insignificantly. The regular boiling point of water is 100 degrees celcius, adding a small handfull of salt will increase the boiling point to roughly 100.04 degrees celcius. Therefore, it is almost insignificant but still does affect it. This is mainly because salt changes the way the molecules react thus making it harder for them to change state from liquid to gas. This ultimately causes the water to get hotter before boiling actually occurs.
Which process, in order, would be necessary for this sequence of the rock cycle:
rock → metamorphic rock → igneous rock
Heat and pressure → melting → cooling
Weathering and erosion → compaction → weathering and erosion
Melting → cooling → melting → erosion
Cooling → melting → cooling → weathering and erosion
Answer:
may be the answer is Heat and pressure - melting - cooling
Determine the kinetic energy of a 600-kg roller coaster car that is moving at a speed of 18 m/s.
Answer:
97200 J
Explanation:
Applying,
K.E = mv²/2.................. Equation 1
Where K.E = Kinetic Energy, m = mass of the roller coaster car, v = velociety of the roller coaster car.
From the question,
Given: m = 600 kg, v = 18 m/s
Substitute these values into equation 1
K.E = (600×18²)/2
K.E = 97200 J.
Hence the kinetic energy of the car is 97200 J
Suppose you are titrating an acid solution with a base solution of known concentration. To calculate the concentration of the acid solution, use three steps. 1. Use the -------------- { (a) delivered volume (b) volume reading} of base --------------- { (a) after (b) to reach (c) before} the endpoint and the known concentration of the base solution to find the ------------ { (a) moles (b) mass (c) concentration} of base used. 2. Use the ------------ { (a) molar mass (b) dilution equation (c) molar ratio} to find the moles of acid from the moles of base. 3. Divide the moles of acid by the volume of -------------- { (a) base solution before (b) acid solution before (c) acid solution after} the titration to find the concentration of acid.
Answer:
1. (a) delivered volume, (b) to reach, (a) moles
2. (c) molar ratio
3. (b) acid solution before.
Explanation:
1. You must titrate the acid with a base solution of known concentration, and use the (a) delivered volume. At the endpoint, the moles of acid and base in the titration follows the chemical equation, thus, you need (b) to reach the endpoint. With volume and concentration of the base we can find its (a) moles
2. With the (c) molar ratio, we can relate the moles of base with the moles of acid
3. When we have the moles of acid, we just need the volume of (b) acid solution before the titration to find molarity of the acid.
If a sample of air initially occupies 240L at 2 atm how much pressure is required to compress it to 20L at constant temperature
Answer:
24 atm.
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 240 L
Initial pressure (P₁) = 2 atm
Final volume (V₂) = 20 L
Temperature = constant
Final pressure (P₂) =?
The final pressure required, can be obtained by using the Boyle's law equation as shown below:
P₁V₁ = P₂V₂
2 × 240 = P₂ × 20
480 = P₂ × 20
Divide both side by 20
P₂ = 480 / 20
P₂ = 24 atm
Thus, the final pressure required is 24 atm.
An inverse relationship can be represented by what?
Answer:
1/....
Explanation:
If we say acceleration 'a' is inversely proportional to mass 'm', then
a=1/m.
The molar mass of copper(II) chloride (CuCl2) is 134.45 g/mol. How many formula units of CuCl2 are present in 17.6 g of CuCl2?
Answer:
7
Explanation:
took test
What factors generally determine whether a reaction happens or not?
A. Reaction rate and color
B. Presence of water and salt
C. Enthalpy and entropy
D. Keg and Ka
Answer:
Explanation:
The answer is C Enthaply and entropy because temperature plays a big role in reactions
Answer:
c
Explanation:
a p e x :)
Who made the first periodic table of the elements?
O A. Ernest Rutherford
O B. Dmitri Mendeleev
O C. Niels Bohr
O D. Henry Moseley
The periodic table was invented by Russian chemist Dmitri Mendeleev in 1869.
Answer:
B. Dmitri Mendeleev
Explanation:
What is the mass of 0.251 moles of water? Using dimensional analysis show work
[tex]1 \text{ mol of H}_2 \text{O} \equiv 18 \text{ g} \implies 0.251 \text{ moles of H}_2 \text{O} \equiv 4.518 \text{ g}[/tex]