LiAlH4 reagent can reduce aldehydes to primary alcohols, ketones to secondary alcohols, carboxylic acids and esters to primary alcohols, amides and nitriles to amines, epoxides to alcohols and lactones to diols.
LiAlH4 is a powerful reducing agent compared to sodium borohydride, NaBH4, since the Al-H bond is weaker and thus less stable than B-H bond.
Reduction of aldehydes or ketone to primary and secondary alcohols:
Initially, a hydride ion is transferred onto the carbonyl carbon and the oxygen atom coordinates to the remaining aluminum hydride species to furnish an alkoxy tri hydro aluminate ion, which can reduce the next carbonyl molecule. Thus three of the hydride ions are used up in reduction. The reaction will be as follows :
AlH4 + ROR → RHROH
Reduction of amides to amine:
Amides are converted to amines. The LAH reduction mechanism is slightly different from that depicted for esters. In iminium ion is formed during the reaction since nitrogen atom is relatively a good donor than oxygen atom. The reaction will be as follows:
RONR2 + AlH4 → RNR2
To look more about hydride reagents click here
brainly.com/question/8376431
#SPJ4
Need help please
thanks
400 meters is equal to approximately 1312.34 feet.
what is the mathematical relation between meter and feet?
The mathematical relationship between meters and feet is based on the conversion factor between these units. The conversion factor is defined as the number of feet per meter, which is approximately 3.2808 feet/meter.
This conversion factor can be used to convert meters to feet by multiplying the number of meters by the conversion factor.
It's important to note that the conversion factor is an approximation, as the exact conversion factor between meters and feet depends on the definition of the meter and the foot. The conversion factor provided here is based on the International System of Units (SI) definitions of these units.
According to the problem:
To convert meters to feet, use the conversion factor 1 meter = 3.2808 feet. To find the equivalent value in feet, multiply the number of meters by the conversion factor.
To convert 400 meters to feet, multiply 400 by 3.2808 to get the following result:
400 meters x 3.2808 feet/meter = 1312.34 feet
So, 400 meters is approximately 1312.34 feet.
To know more about unit conversion, visit:
https://brainly.com/question/20484605
#SPJ1
Upon reaction of 1.274 g of copper(II) sulfate with excess zinc metal, 0.392 g copper metal was obtained according to the equation: CuSO4 (aq) + Zn (s) Cu (s) + ZnSO (aq) What is the percent yield? (77.3%)
The Percent Yield=(Actual YieldTheoretical Yield)×100% = 77.3%
What does the term percent yield mean?A real yield divided by hypothetical yield multiplied by 100 is known as percent yield.Yield Percentage Equals Actual YieldA theoretical yield of 100%There are various reasons why a chemical reaction's theoretical yield might not match its actual yield, and these will be covered in more detail in later chapters of the course.
What formula is used to determine percentage yield?Percent yield = Actual Yield/Theoretical Yield x 100 is the formula we use to calculate the yield percentage.
To know more about yield percentage visit:
https://brainly.com/question/29714892
#SPJ4
Which of the following are valid reasons you must repeat the standard curve (calibration plot) for crystal violet this week? I The spectrophotometer may not be the same instrument as last week. II The cuvette will not be the same as last week. III, A spectrophotometer may give different results on different days. a. I and III only b. I and II only c. II and III only d. I, II, and III
Option c) is correct . The cuvette will not be same as last week or spectrophotometer may give different results on different days.
What is calibration plot?
This curve is used in analytical chemistry for the determination the concentration of an unknown sample solution.
Some errors might get during measurements
1. didn't wait for instrument to calibrate. (Before showing 0.00 have placed cuvette in it)
2. Not handled the cuvette in correct way.
3. May changed the cuvette. (Size of cuvette)
For more information about calibration curve please visit:
https://brainly.com/question/14662384
#SPJ4
For each of the following descriptions, decide if the material is likely to be a mixture or a pure compound or element, and then decide if the process is a chemical or a physical change. a) A clear, colorless, crystalline solid is heated. A pale yellow-green gas is given off and a shiny, malleable metal was left behind. b) A brown liquid is heated and a colorless, aromatic liquid is produced along with a clear, colorless liquid while a brown liquid is left behind in the container. c) Adding sugar to tea causes the tea to taste sweeter. d) A shiny, dark gray metal and a clear colorless gas combine to form a flaky orange solid.
Option A, B and D are chemical changes and Option C is a physical changes
Physical and Chemical changes:
A change in physical attributes accompanies a physical change. Melting, turning into a gas, changing strength or durability, changing crystal structure or texture, and changing shape, size, color, volume, or density are a few examples of physical qualities.Chemical synthesis, or, alternatively, chemical breakdown into two or more separate molecules, occurs when one material reacts with another to create a new substance. These processes are referred to as chemical reactions, and they often cannot be reversed except by other chemical reactions.Nothing about the original crystalline solid remains in the produced gas and metal. The crystalline solid was therefore a combination that disintegrated into its constituent parts. Chemical changes will result from this process.Water-soluble tea components are combined to make tea. A physical shift occurs when sugar is added to tea. Sugar does not interact with the chemicals in tea; rather, it just sweetens the solution and combines its qualities with those of the compounds.Hence, Option A, B and D are chemical changes and Option C is a physical changes
To learn more about chemical changes click on the reaction
https://brainly.com/question/1222323
#SPJ4
I need it ASAP thank you
The classification of given substances is as follows:
Ag is the Atomic element.
F₂ is the Molecular element.
CO is the Molecular compound.
PbI₄ is the Ionic compound.
What are ionic compounds?Crystalline solids are formed by tightly packed ions of opposite charge. Ionic compounds are usually formed when metals react with non-metals. Elements can gain or lose electrons to reach the next noble gas configuration. The formation of ions (by gaining or losing electrons) to complete octets helps them stabilize.
In reactions between metals and nonmetals, metals generally lose electrons to complete octets, while nonmetals gain electrons to complete octets. Metals and non-metals generally.
To know more about ionic compounds, visit:
https://brainly.com/question/9167977
#SPJ1
what is the shortest wavelength line in nanometers in series of the hydrogen spectrum when m=l and n>l? (c=1.097*10^7)
91.2 nm is the shortest wavelength line in nanometers in series of the hydrogen spectrum when m=l and n>l
What is hydrogen spectrum?The electromagnetic radiation that a hydrogen electron emits when it transitions from an excited state to a normal state is known as the hydrogen spectrum. The wavelength of the hydrogen spectrum correlates to the energy emitted.
In order to boost electrons to higher energy levels, hydrogen molecules must first be broken into hydrogen atoms (thus the atomic hydrogen emission spectrum). Assume an electron is stimulated to the third energy level. It would probably lose energy once again if it dropped to a lower level.
As we know,
1/λ = R × (z)²× [(1/n₁)² - (1/n₂)²]
Given, it is hydrogen spectrum thus z = 1
and R = 1.097 × 10⁷ m⁻¹
n₁ = 1 and n₂ = ∞
Now,
or, 1/λ = (1.097 × 10⁷ m⁻¹) × (1)²× [(1/1)² - (1/∞)²]
or, 1/λ = 1.097 × 10⁷ m⁻¹
or, λ = 1/ 1.097 × 10⁷ m⁻¹
λ = 91.2 nm
To know more about hydrogen spectrum refer to:
https://brainly.com/question/14516049
#SPJ1
how many sugar molecules are present in 300mL of a 2.0 m solution
The amount of sugar molecules present in 300mL of a 2.0M solution is 3.61 × 10²³ molecules of sugar.
How to calculate number of molecules?The number of molecules of a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number (6.02 × 10²³).
According to this question, 300mL of a 2.0M solution is given. The molarity of the solution can be calculated as follows:
no of moles = 0.300 × 2.0 = 0.6moles
no of molecules = 0.6mol × 6.02 × 10²³
no of molecules = 3.61 × 10²³ molecules of sugar.
Learn more about no of molecules at: https://brainly.com/question/28931982
#SPJ1
Given: S03(g) + H20(1) -> H2SO4(1); AH° = -130. kJ
determine AH° for the following thermochemical equation.
5H2S04(1) -> 5S03(8) + 5H20(1)
Considering the definition of enthalpy of reaction, the enthalpy change for the reaction is 650 kJ.
Enthalpy of reactionThe enthalpy of a chemical reaction as the heat absorbed or released in a chemical reaction when it occurs at constant pressure. That is, the heat of reaction is the energy that is released or absorbed when chemicals are transformed into a chemical reaction.
Enthalpy in this caseIn this case you want to calculate the enthalpy change of:
5 H₂SO₄ → 5 SO₃ + 5 H₂O
You know the following reaction, with his corresponding enthalpie:
SO₃ + H₂O → H₂SO₄ ΔH = –130 kJ
To obtain the enthalpy of the desired chemical reaction you need 5 moles of H₂SO₄ on reactant side. The given equation has 1 mole of H₂SO₄ on the product side, soit is necessary to locate it on the reactant side (invert it) and multiply it by 5.
When an equation is inverted, the sign of delta H also changes. And since enthalpy is an extensive property, that is, it depends on the amount of matter present, since the equation is multiply by 2, the variation of enthalpy also.
In summary, you know that the enthalpy change is 650 kJ.
Learn more about enthalpy of a chemical reaction:
brainly.com/question/5976752
brainly.com/question/13707449
#SPJ1
In order to produce sp3 hybrid orbitals, ________ s atomic orbital(s) and ________ p atomic orbital(s) must be mixed.
In order to produce sp3 hybrid orbitals, 1s atomic orbital(s) and 3p atomic orbital(s) must be mixed.
1 s, 3 p and 1 d orbitals of approximately the same energy intermix to produce sp³ hybrid orbitals and are used to create 5 identical or degenerate hybrid orbitals. These orbitals forms a trigonal bipyramidal symmetry by arranging themselves. In trigonal bipyramidal three orbitals are arranged in a trigonal plane and the other two orbitals are arranged up/down the trigonal plane at right angles.
For example, formation of PCl₅ requires five unpaired electron, the phosphorus atom was excited and one electron from the 3s filled one of the vacant 3d orbitals.
Learn more about hybrid orbitals from the link given below.
https://brainly.com/question/14114363
#SPJ4
I need help asap please
Following is the classification of given substances:
Atomic element: AgMolecular element: F₂Molecular compound: COIonic compound: PbI₄What is difference between element and compound?An element is a pure substance containing only one type of atom whereas, compound contains more than one kind of atom. Elements are classified by their properties and compounds are classified by the type of bond. Symbols represent elements and compounds are defined by chemical formulas. Their atomic number identifies the elements. Compounds are separated by their atomic ratio. Chemical reactions cannot break-down elements, but they can break down compounds, which is the main difference between compound and element. There are several other factors that distinguish elements from compounds, such as total number, properties, composition, and examples. There are 118 distinct elements in the periodic table. There are countless connections. Elements held the properties of their parent atom. Compounds do not have specific properties and have different properties depending on the type of bond.
To know more about element and compound, visit:
https://brainly.com/question/13062264
#SPJ1
Part 1: Name the type of chemical reaction that occurs when aluminum (Al) reacts with copper nitrate (Cu(NO3)2).
Part 2: Explain why aluminum does not react with potassium nitrate (KNO3) although it reacts with copper nitrate.
Aluminium cannot replace potassium because potassium is more reactive than aluminium. And the response won't take place.
What is Displacement Reaction?
Chemistry's most crucial chemical reactions are displacement reactions. They are applied in a variety of settings and contexts. For instance, electroplating, which is based on displacement reaction, is used to stop iron objects from rusting.
Displacement reactions are those in which a portion of one reactant is replaced by another reactant. Another name for it is a replacement reaction. as another reactant ion takes the place of one ion that was previously present.
For instance, Fe+CuSO4FeSO4+Cu
One element is replaced by another in a compound in a single displacement reaction, which is also known as a single replacement reaction.
Chlorine takes the place of bromine when it is introduced to a solution of sodium bromide in gaseous form (or as a gas dissolved in water). Chlorine, which is more reactive than bromine, causes sodium bromide to lose bromine, which causes the solutions to turn blue. The bromine that is displaced gives the colour brown. The Cl and Br have been switched around in the equation, as can be seen.
Learn more about Displacement Reaction from given link
https://brainly.com/question/20690229
#SPJ1
The mass ratio of sodium to fluorine in sodium fluoride is 1.21:1. A sample of sodium fluoride produced 23.5 g of sodium upon decomposition. How much fluorine was formed?
19.42g of fluorine is produced upon decomposition of sodium fluoride.
What is mass ratio?The mass of a given substance is converted to moles using the molar mass of this substance in the periodic table. Moles of a given substance are then converted to moles of an unknown substance using the molar ratios from the balanced chemical formulas.
Mass ratio is defined as the percentage composition of the masses of elements in a molecule or compound. A compound always has a defined mass fraction of the corresponding element.
Mass ratio of sodium to fluorine = 1.21:1
If the mass of sodium fluoride produced is 23.5 g
Using dimensional Analysis,
(23.5g of sodium/sodium fluoride)×(1 g of Fluorine/1.21 g of sodium)
= 19.42g(g of fluorine/g of sodium fluoride)
Mass of fluorine produced = 19.42g
To know more about mass ratio, visit:
https://brainly.com/question/14561456
#SPJ1
A SEMI-PERMEABLE MEMBRENE
Semipermeable membranes are a type of polymeric, biological or synthetic membrane that permits certain ions or molecules to flow through them via osmosis.
What sort of membrane would be considered semipermeable?A thin membrane known as a semipermeable membrane allows certain tiny molecules to flow through but not others. A semipermeable membrane can be a small piece of cellophane.
What does it mean to be semi-permeable?Semi implies some or a small amount, and permeable means able to let anything through. Consequently, a semi-permeable screen is one that only permits specific substances to flow through. Different from membrane pores, which let all materials flow through the barrier, are semi-permeable membranes.
To know more about Semi-Permeable Membrane visit :
https://brainly.com/question/14925714
#SPJ1
Calculate the density of air at exactly 35°C and 1.00 atm (assuming that air is 80.0 percent N2 and 20.0 percent O2).
The density of air at exactly 35°C and 1.00 atm assuming that air is 80.0 percent N₂ and 20.0 percent O₂ is 1.139 g/L
How do I determine the density of the air?We'll begin by obtaining the average atomic mass of the air. This can be obtained as follow:
Molar mass of N₂ = 28 g/molAbundance of N₂ = 80%Molar mass of O₂ = 32 g/molAverage atomic mass of air =?Average atomic mass of air = (Molar mass of N₂ × abundance) + (Molar mass of O₂ × abundance)
Average atomic mass of air = (28 × 80%) + (32 × 20%)
Average atomic mass of air = 28.8 amu
Finally, we shall determine the density of the air. This is illustrated below:
Temperature (T) = 35 °C = 35 + 273 = 308 KPressure (P) = 1 atmGas constant (R) = 0.0821 atm.L/Kmol Average atomic mass of air (M) = 28.8 amuDensity =?Density = PM / RT
Density = (1 × 28.8) / ( 0.0821 × 308)
Density = 1.139 g/L
Thus, the density of the air is 1.139 g/L
Learn more about density:
https://brainly.com/question/952755
#SPJ1
Which is true regarding the following reaction that occurs when aqueous solutions of Kl(aq) and Pb(NO3)2(aq) are mixed? 2 Kl(aq) + Pb(NO3)2(aq) -> 2 KNO3(aq)+ PbI2(S) I. I is a spectator ion
II. NO3, is a spectator ion III. Pbl2 precipitates IV. KNO3, precipitates O A. I and II B. I and III
C. I and IV D. II and III
E. II and IV
(D. II and III) A precipitate of PbI2 will form near the center of dish. The potassium (K+) and nitrate ions (NO3-) are considered "spectators" because both are present but neither participate in the reaction.
What ions are always spectator ions?Compare the solutions before and after the reaction, sodium and nitrate ions should present in both solutions. They do not undergo any chemical change. These ions are called spectator ions as they don't participate in the chemical reaction.
Are spectator ions always soluble?Itty rules is always soluble. Therefore, it will always be a spectator ion, ,which is ammonia young. According to, Itty rules always makes the compound soluble, so it will always also serve as a spectator ion.
Learn more about isotopes on:
https://brainly.com/question/27475737
#SPJ4
What human activity is the primary of acid rain?
Answer:
Power plants - sulfur dioxide and nitrogen oxides when they burn fossil fuels, such as coal, to produce electricity.
- The exhaust from cars, trucks, and buses releases nitrogen oxides and sulfur dioxide into the air.
Explanation:
In 1909 Fritz Haber reacted Nitrogen with hydrogen to produce 76.3 grams of ammonia. How many grams of hydrogen reacted?
N2(g) + 3H2(g) → 2NH3(g)
Question 5 options:
13.5 grams
4.8 grams
16.9 grams
21.2 grams
Answer:
13.5 g.
Explanation:
76.3 g NH3 contains 4.49 mol NH3. This comes from (3/2)4.49 mol H2 = 6.75 mol H2, or 13.5 g hydrogen.
The students predict that the reaction will form ions that are more stable and will attract each other. Use the dropdown menus to complete the statements that describe the students* prediction.
After a sodium atom
the chlorine atom, it has a full electron shell. After the chlorine atom
sodium atom, it has a full electron shell. The transfer between sodium and chlorine results in a
The formation of the sodium chloride would occur when one electron moves from sodium to chlorine.
What is an ionic compound?We know that a compound is ionic because the compound can be formed by the combination of a metal and a non metal when this occurs, there would be the transfer of an electron from a metal to a non metal. The implication of this is that we would have a pair of ions. On ion would be positively charged and the other ion would be negatively charged.
In the case of the chlorine and the sodium atoms, the compound that is formed here is sodium chloride. The only electron that is found in the outermost shell of sodium atom would be removed and then the chlorine atom would now be seen to have a full shell.
Thus in the formation of the ionic compound, there is a transfer of electrons from sodium to chlorine.
Learn more about ionic compound:https://brainly.com/question/29005103
#SPJ1
What is the molar mass of Cu(C104)2?
what is the advantage of periodic table
Answer: It is easier to remember the properties of an element if its position in the periodic table is known.
Explanation:
If an atom has sp2 hybridization in a molecule:
The maximum number of σ bonds that the atom can form is
The maximum number of p-p bonds that the atom can form is
According to the molecular geometry, there are 3 maximum number of σ bonds that the atom can form and 2 maximum number of p-p bonds that the atom can form .
What is molecular geometry?Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
Learn more about molecular geometry,here:
https://brainly.com/question/28557524
#SPJ1
4. A main group element has 81 protons and an estimated nuclear charge of +3. Therefor, the element has ____ electrons and can be on in Group ____ of the Periodic Table.
Which set correctly complete the blanks?
A. 84, 3A
B. 81, 5A
C. 78, 3A
D. 78, 5A
A main group element has 81 protons and an estimated nuclear charge of +3. Therefor, the element has 84 electrons and can be on in Group 3A of the Periodic Table.
What element has a nucleus with 81 protons?With the atomic number 81 and the chemical symbol Tl, thallium is one of the elements.
What impacts the human body does thallium have?When consumed in large quantities, thorium can have negative effects on your nervous system, heart, lungs, liver, and kidney. After being exposed to high levels of thallium for a short time, symptoms like temporary hair loss, vomiting, and diarrhea are possible.
Thallium is regarded as a cumulative poison that can have a negative impact on one's health and cause degenerative changes in numerous organs. The nervous system experiences the most negative effects.
To know more about protons visit:
https://brainly.com/question/21114320
#SPJ1
画喵區
6.
?
O
A scientist is testing milk for the presence of bacteria. Exactly 25 milliliters of a test solution
must be added to each milk sample. Which of these instruments would most accurately measure
the volume of the test solution?
250ml
-250
-200
-150
-100
50
The test solution's volume is most precisely measured using a graduated cylinder.
What are mass and volume?A three-dimensional object's volume is the area it takes up, and it is expressed in cubic units. Cm3 and in3 are two instances of cubic units. The amount of matter in an item may be estimated by its mass, on the other hand. The weight of an object is a typical way to determine mass (in units like pounds or kilograms).
What does water volume mean?Water has a capacity of one cubic centimeter per milliliter (1 mL) (1cm3). The dimensions and weights of certain atoms differ. The amount of protons in an atom's nucleus determines the sequence in which specific atoms appear on the periodic table.
To know more about volume visit:
https://brainly.com/question/5699190
#SPJ1
Solid lithium metal and diatomic nitrogen gas react spontaneously to form a solid product. Give the balanced chemical equation (including phases) that describes this reaction.
Indicate the phases using abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively.
Solid lithium reacts with dinitrogen giving lithium nitride. Where three electrons from lithium is transferred to nitrogen. The balanced chemical equation is given below:
[tex]\rm 6 Li (s) + N_{2} (g) \rightarrow 2 Li_{3}N (s)[/tex]
What is lithium nitride?Lithium nitride is a brownish-red colored powder compound formed by the ionic bonding between lithium and nitrogen. Lithium is an alkali metal with 3 electrons with one valence electron.
Nitrogen is a non-metal with 5 valence electron and it needs 3 more electrons to achieve octet. Thus, lithium gives its valence electron to nitrogen. One nitrogen needs 3 electrons thus two nitrogen needs total 6 electrons. Thus two nitrogen atoms bonds with 6 Li atoms as written in the balanced reaction.
To find more on lithium nitride, refer here:
https://brainly.com/question/1550810
#SPJ1
Please someone can help me to fill out??
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, blanks can be filled with the knowledge of types of chemical compound.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. Covalent compounds are formed by elements whose electronegativity difference is null. These compounds have low melting and boiling point.
Therefore, blanks can be filled with the knowledge of types of chemical compound.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ1
The question that I need help with is in the photo
The volume of 0.240 M KOH to react completely with 11.4 ml of 0.110 M sulphuric acid is 5.225 ml.
What is molarity?Molarity of a solution is the ratio of the number moles of solutes to the volume of solution in liters. Molarity is most common term used to express the concentration of a solution.
Let the volume and molarity of the titrant be V1 and M1 respectively and the volume of molarity of the analyte be V2 and M2 then,
M1 V1 = M2 V2.
Given volume of H₂SO₄ = 11.4 ml
Molarity = 0.11 M
Molarity of KOH = 0.24 M
volume of KOH = (11.4 ml × 0.11 M) / 0.24 M
= 5.225 ml.
Therefore, the volume of KOH needed for the titration is 5.2 ml.
To find more on molarity, refer here:
https://brainly.com/question/16727614
#SPJ1
3. Copper (II) sulfide (CuS) is formed when 48.2 grams of copper are added to 35.0 grams of
sulfur.
Which reactant is the limiting reagent?
How much product is formed?
How much excess reagent remains?
(9 pts. total / 2 pts. for equation - 4 pts. for stoich - 2 pts. for limiting reagent - 1 pt. for excess
reagent.)
1. The limiting reagent would be sulfur.
3. The amount of product formed would be 34.4 grams
2. The amount of excess copper that remains would be 24.96 grams.
Sotichiometric problemCopper and sulfur react to form copper (II) sulfide according to the following balanced equation:
[tex]Cu + S -- > CuS[/tex]
From the balanced equation of the reaction, the mole ratio of copper to sulfur is 1:1.
Recall that, mole = mass/molar mass
Mole of 48.2 grams of copper = 48.2/64
= 0.75 mol
Mole of 35.0 grams of sulfur = 35/98
= 0.36 mol
Since the stoichiometric mole ratio is 1:1, it means that sulfur is the limiting reactant or reagent while copper is in excess.
The excess amount of copper would be: 0.75 - 0.36 = 0.39 mol
Mass of 0.39 mol copper = 0.39 x 64 = 24.96 grams
With sulfur being the limiting reactant, the equivalent amount of CuS formed will be 0.36 mol considering that the mole ratio is 1:1.
Mass of 0.36 mol CuS = 0.36 x 95.6
= 34.4 grams.
In other words, the limiting reactant is sulfur, the amount of product formed is 34.4 grams, and the amount of excess copper is 24.96 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/15047541
#SPJ1
State amagat's law of combining volume. It mathematical and graphical representation
As long as the temperature T and pressure p stay constant, Amagat's equation asserts that the extensive volume V = Nv of a gas mixture equals the total of volumes Vi of the K component gases:: N v ( T , p ) = ∑ i = 1 K N i v i ( T , p ) .
What does the Amagat Law state?According to Amagat's law of partial volumes, the sum of the partial volumes that each gas would occupy if it existed alone at the mixture's temperature and pressure makes up the entire volume of a gas mixture.
What exactly is Amagat's partial volume law?According to Amagat's law of partial volumes, a mixture's volume is equal to the total of its component parts' partial volumes.
To know more about Amagat's law visit:-
https://brainly.com/question/15396335
#SPJ1
A quantity of nitrogen gas is enclosed in a tightly stoppered 500 mL flask at room temperature (20.0 °C) and 0.836 atm pressure. The flask is then heated to 680 °C. If the flask can withstand pressures up to 3 atm, will it explode under this heating? (In other words, what is the final pressure?). Remember to convert between °C and K.
Will the flask explode if the pressure is less than 3 atm if it can tolerate pressures up to that level.
Is nitrogen beneficial to the body?To create the proteins found in your muscles, skin, blood, hair, nails, and DNA, your body needs nitrogen. According the Royal Society of Chemistry, your diet's protein-containing foods are where you get your nitrogen. Meat, fish, beans, nuts, eggs, milk, and other dairy items are some of these foods. Nitrogen exposure is hazardous because it can displace oxygen and induce asphyxia.
Briefing:The formula below is used to determine the pressure at a given temperature for a given volume of nitrogen gas:
P₁/T₁ = P₂/T₂
where;
Initial pressure is P1.
Initial temperature is T1.
Final pressure is P2.
T2 is the final temperature.
P2 solution
P₂ = P₁ * T₂ / T₁
P₂ = 0.836 * (680 + 273) / (20 + 273)
P₂ = 2.72 atm =3atm
To know more about nitrogen visit:
brainly.com/question/16711904
#SPJ1
Outline the steps needed to determine the limiting reactant when 0.50 mol of Cr and 0.75 mol of H3PO4 react according to the following chemical reaction. 2Cr + 2H3PO4 -> 2CrPO4 + 3H2
The theoretical yield of the reaction is 1.13 g. The acid H₃PO₄ is the limiting reactant.
Definition of the theoretical yield
The theoretical yield of a given chemical reaction can be obtained from the balanced reaction equation.
Number of moles of Cr = 0.50 g /52 g/mol = 9.6 × 10⁻³ moles
Number of moles of acid = 0.75 g/98 g/mol = 7.7 × 10⁻³ moles
Given that the reaction is 1:1, the limiting reactant would be the acid.
The theoretical yield that is obtained from,
Theoretical yield = Number of moles of product × Molar mass of product
Substitute the values to obtain,
7.7 × 10⁻³ moles × 147 g/mole = 1.13 g
Learn more about limiting reactant from the link given below.
https://brainly.com/question/13162713
#SPJ4