The hardness of a mineral that measures 9 on the hardness scale can only be scratched using special equipment.
what are minerals?Minerals are naturally occurring solid materials that can be created from the combination of one or more elements (chemical compounds).
What is hardness in properties of minerals?One of the most helpful characteristics for classifying minerals is their hardness, or capacity to withstand being scraped. The ability of one mineral to scrape another mineral determines how hard something is. it is clear to note that by scratching a mineral against another substance with a known hardness on the Mohs Hardness Scale, one can determine a mineral's relative resistance to scratching.
what is mohs scale hardness of a mineral?The Mohs Hardness Scale is a practical tool for identifying minerals. When a mineral is scratched against another material with a known hardness on the Mohs Hardness Scale, its relative resistance to scratching is determined.
learn more about minerals here:
brainly.com/question/15844293
#SPJ1
Complete question
Which of the following describes the hardness of a mineral that measures 9 on the hardness scale?
(a) It rubs off your finger.
(b) It can be scratched with a nail.
(c) It can be scratched easily with a penny.
(d) It can only be scratched using special equipment.
Please help I have less than 9 minutes
The water-gas shift reaction is important in several chemical processes, such as the
production of H₂ for fuel cells. This reaction can be written as follows:
H₂(g) + CO₂(g) → H₂O(g) + CO(g)
with K = 0.106 at 700 K. If a mixture of gases that initially contains 0.632 M CO2 and 0.570
M H₂ is allowed to equilibrate at 700 K, what is the final concentrations of CO?
To solve this problem, we can use the equilibrium constant expression for the water-gas shift reaction:
K = [CO][H2O] / [CO2][H2]
where [CO], [H2O], [CO2], and [H2] are the equilibrium concentrations of the respective species.
We are given the value of K and the initial concentrations of CO2 and H2. We can use these values to solve for the equilibrium concentration of CO.
First, we need to set up the equilibrium constant expression:
K = [CO][H2O] / [CO2][H2]
We are given that K = 0.106 and [CO2] = 0.632 M. We can substitute these values into the equation:
0.106 = [CO][H2O] / (0.632 M)(0.570 M)
We can then solve for [CO] by multiplying both sides of the equation by (0.632 M)(0.570 M) and rearranging:
[CO] = (0.106)(0.632 M)(0.570 M) / (0.632 M)(0.570 M)
[CO] = 0.106
Thus, the final concentration of CO is 0.106 M.
Tin (II) fluoride, SnF2, is found in some toothpastes. Tin (II) fluoride is made by reacting solid tin with hydrogen fluoride according to the following BALANCED equation. Sn (s) + 2 HF (g) → SnF2 (s) + H2(g) How many grams of hydrogen gas will be produced if 3.9 moles of tin react?
The mass of the hydrogen gas produced if 3.9 moles of tin react is equal to 7.9 g.
What is the balanced chemical equation?A balanced chemical equation in which the number of atoms of every type of element is same on the both sides of the reaction. The law of conservation of mass is followed by every balanced chemical equation.
The total mass of the elements on the reactant side is equal to the total mass of elements on the product side in a balanced chemical equation according to this law.
Given a balanced chemical equation of the reaction of the tin and HF:
[tex]Sn (s) + 2 HF (g) \longrightarrow SnF_2 (s) + H_2(g)[/tex]
One mole of tin produces hydrogen gas = 1 mol
Then 3.9 mol of tin produces hydrogen gas = 3.9 mol
The mass of 3.9 mol of hydrogen gas = 3.9 ×2 = 7.8 g
Learn more about the balanced chemical equation, here:
brainly.com/question/28294176
#SPJ1
Sulfur has 6 valence electrons.
Which element could pair with it
in a 1 atom : 1 sulfur ratio?
Answer:
Any Group 2A element (Be, Mg, Ca, Sr, Ba, Ra)
Explanation:
According to the Octet Rule, Sulfur would want to gain two electrons in its outermost shell to achieve an octet (8 total electrons). The elements that could accomplish this in a one-to-one ratio would be Group 2A on the periodic table (alkaline earth metals).
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, alkaline earth metals are the suitable elements.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
The compound that is ionic in nature can be dissociated very easily in water. Since ionic compounds are polar in nature, they readily dissolve in water. The elements that could accomplish this in a one-to-one ratio would be alkaline earth metals
Therefore, alkaline earth metals are the suitable elements.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
When pentane(C5H12) reacts with oxygen, carbon dixoide and water is produced.
If 18.7 grams of pentane is burned, what mass of carbon dioxide is produced?
Pentane, which has the chemical formula C5H12, reacts with oxygen to produce carbon dioxide and water according to the following balanced chemical equation:
2 C5H12 + 25 O2 -> 10 CO2 + 12 H2O
To determine the mass of carbon dioxide produced when 18.7 grams of pentane is burned, we can use the stoichiometry of the chemical reaction. Stoichiometry is the study of the quantities of reactants and products in a chemical reaction, and it allows us to predict the amount of a product that will be produced based on the amount of reactant consumed.
Since the chemical equation is balanced, we know that for every 2 molecules of pentane that react, 10 molecules of carbon dioxide are produced. This means that for every 2 grams of pentane that react, 10 grams of carbon dioxide will be produced.
Since 18.7 grams of pentane is equivalent to 18.7 / 2 = 9.35 moles of pentane, we can use this value to calculate the number of moles of carbon dioxide produced:
9.35 moles of pentane * (10 moles of CO2 / 2 moles of C5H12) = 9.35 * 5 = 46.75 moles of CO2
To convert the number of moles of carbon dioxide to mass, we can use the molar mass of carbon dioxide, which is 44.01 grams per mole:
46.75 moles of CO2 * 44.01 grams/mole = 2068.7 grams of CO2
Therefore, if 18.7 grams of pentane is burned, approximately 2068.7 grams of carbon dioxide is produced.
A mixture of 14.2 g of H2 and 36.7 g of Ar is placed in a 100.0 L container at
STP.
a. What is the total pressure in atmospheres inside the container?
b. What is the mole fraction and partial pressure of H2 in atmospheres?
c. What is the mole fraction and partial pressure of Ar in atmospheres?
a) The total pressure of the system is 1.79 atm
b) The mole fraction and partial pressure of hydrogen is 0.89 and 1.59 atm respectively
c) The mole fraction and the partial pressure of argon is 0.11 and 0.19 atm.
What is the total pressure?We know tat we can be able to obtain the total pressure in the system by the use of the ideal gas equation. We would have from the equation;
PV = nRT
P = pressure
V = volume
n = Number of moles
R = gas constant
T = temperature
Number of moles of hydrogen = 14.2 g/2g = 7.1 moles
Number of moles of Argon = 36.7 g/40 g/mol
= 0.92 moles
Total number of moles = 7.1 moles + 0.92 moles = 8.02 moles
Then;
P = nRT/V
P = 8.02 * 0.082 * 273/100
P = 1.79 atm
Mole fraction of hydrogen = 7.1/8.02 = 0.89
Partial pressure of hydrogen = 0.89 * 1.79 atm
= 1.59 atm
Mole fraction of argon = 0.92 / 8.02
= 0.11
Partial pressure of argon = 0.11 * 1.79 atm
= 0.19 atm
Learn more about partial pressure:https://brainly.com/question/13199169
#SPJ1
Identify the patterns in the data. Try to explain why those patterns might be occurring.
The pattern here is Non-symmetrical or bimodal.
How can you see patterns in data?
Data patterns are frequently explained in terms of their centre, spread, form, and peculiar characteristics. There are specific descriptive terms for several typical distributions, such as symmetric, bell-shaped, skewed, etc. In exploratory data analysis, this is helpful. Probability is a tool for predicting data trends.How do you define "identifying patterns in data"?
A group of facts that repeatedly occurs in an identifiable fashion is called a pattern. It can be found in the asset's history or the histories of other assets with comparable traits. The analysis of trends frequently includes both price and selling volume.To know more about data patterns, checkout this link:
https://brainly.com/question/28835836
#SPJ4
What a mass from phenylaamine s produced from 378g of aspartame?
The molar mass of phenyl alanine is 165 g/mol and the mas of the phenyl alanine is 211.2 g /mol
What is the mass of the phenylamine?We know that the statement in the question has told that from the reaction equation. It is one mole of the aspartame that is required to be able to obtain one mole of the phenylamine.
Now we know that the number of moles of the aspartame that is required can be obtained by the use of;
Number of moles = mass/molar mass
= 378g/294.3 g/mol
= 1.28 moles
Molar mass of phenylalanine = 9(12) + 11(1) + 14 + 2(16)
=108 + 11 + 14 + 32
= 165 g/mol
Hence mass of the phenylamine = 1.28 moles * 165 g/mol
= 211.2g
Learn more about molar mass:https://brainly.com/question/12127540
#SPJ1
One way to measure temperature in some applications is to monitor
the gas pressure in a rigid, closed container. What is the final
temperature (in °C) of such a vessel, calibrated to initially read 1.00
atm at 0.00 °C, if the pressure changes to 1.25 atm?
Answer:
To determine the final temperature (in °C) of a vessel that is calibrated to initially read 1.00 atm at 0.00 °C if the pressure changes to 1.25 atm, we can use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Since the volume, number of moles of gas, and the ideal gas constant are all held constant in this problem, we can rearrange the equation to solve for T:
T = (PV)/(nR)
Substituting the given values into the equation, we get:
T = (1.25 atm * V)/(nR)
= (1.25 atm * V)/(1R)
Since the initial pressure and temperature of the vessel are 1.00 atm and 0.00 °C, respectively, we can use the ideal gas law equation to solve for the initial volume of the vessel:
V = (nRT)/P
= (1 * R * 0.00 °C)/(1.00 atm)
= 0
Since the volume of the vessel is 0, the final temperature of the vessel cannot be determined using the ideal gas law equation.
Therefore, it is not possible to determine the final temperature of the vessel in this situation.
Primary alcohols can also dehydrate to alkenes. Unlike secondary and tertiary alcohols, the dehydration reaction occurs under an E2 elimination instead of an El mechanism, due to the instability of the primary carbocation that would be formed. Consider the reaction: CH3CH2CH2CH OH H2SO4 product Draw the expected dehydration product of 1 equiv. of a primary alcohol. Select Draw Rings More Erase C H
The product of this reaction is an alkene, specifically 1-butene: CH3CH=CHCH3.
In this reaction, the primary alcohol (CH3CH2CH2CH2OH) is converted to an alkene (CH3CH2CH=CH2) by the addition of H2SO4 as an acid catalyst. The E2 reaction involves the abstraction of a proton from the carbon adjacent to the alcohol, forming a double bond and releasing a molecule of water in the process.
Define primary alcohols?
Primary alcohols are organic compounds containing an alcohol functional group with a carbon atom that has no alkyl substituents. Primary alcohols usually have the general formula CnH2n+1OH, where n is the number of carbon atoms in the molecule. Examples of primary alcohols include ethanol, methanol, propanol, and butanol.
To know more about Primary alcohols,
https://brainly.com/question/22806847
#SPJ4
A liquid has a volume of 4 mL and a mass of 24 g what is the density of the liquid. (Help rn)
A liquid has a volume of 4 mL and a mass of 24 g, 6gm/mol is the density of the liquid.
What is density?Density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. The unit of density that is most frequently used is grams per cubic centimeter, or gm/mol.
One of an object's most significant and practicable physical characteristics is density. Densities are often used to identify pure substances, classify mixtures, and estimate their composition.
To calculate volume of a substance, we use the equation:
Density = Mass/volume
We are given:
Mass of liquid = 24 g
Volume of liquid = 4 ml
Putting values in above equation, we get:
density = 24 gm /4 ml
or, density = 6 gm/mol.
Hence, the density of liquid is 6 g/ml
To know more about density refer to:
https://brainly.com/question/1354972
#SPJ1
14) A sample contains 1.46 g of Cobalt-55. After 2.00 days, 0.219 g remains. What is the half-life?
A) 11.6h-1
B) 22.6h-1
C) 1.35 h-1
D) 17.5h-1
E) 0.540 h
The half-life of the Cobalt-55 is equal to 17.4 hr.
What is the half-life of a radioactive element?The half-life of the radioactive isotope can be described as the time required to decrease its actual amount to half after disintegration. The half-life period of a radioactive material is independent of the original or initial amount of the material.
Given, the original amount of Cobalt-55, N₀ = 1.46 g
The remaining amount of Cobalt-55, N = 0.219 g
The time for which decay occurs, t = 2.00 days = 48 hrs
Consider that k is the rate constant of the decay of Cobalt-55,
[tex]{\displaystyle k = \frac{2.303}{t} log\frac{N_o}{N}[/tex]
[tex]{\displaystyle k = \frac{2.303}{48} log\frac{1.46}{0.219}[/tex]
k = 0.0395 hr⁻¹
The half-life time of Cobalt-55 can be calculated from the below-mentioned formula:
[tex]{\displaystyle t_{1/2} =\frac{0.693}{k}[/tex]
[tex]{\displaystyle t_{1/2} =\frac{0.693}{0.0395}[/tex]
[tex]{\displaystyle t_{1/2} =17.5 \;hr[/tex]
Therefore, the half-life period of the given sample of the Cobalt-55 will be to 17.4 hours.
Learn more about the half-life period, here:
brainly.com/question/14521252
#SPJ1
In which of the following sets are the charges given correctly for all the ions? a.Na+, Mg+, Al + b.K+, Sr, 0²- C.Rb-, Ba2-, p 3+ d.N-, 0²-, F³-
Would an action potential be possible without the presence of proteins? Explain your
response.
A. Yes, the action potential would be possible since the Na+ being hydrophobic can enter the neuron through the phospholipid bilayer.
B. No, the action potential would not be possible since Na+ being hydrophilic would not be able to move across the plasma membrane.
C. No, the action potential would not be possible since Na+ being hydrophilic would not be able to move across the plasma membrane unless ATP was available
Action potential would not be possible because ions would not be able to move across the plasma membrane without the channels provided by proteins.
What is action potential ?When the membrane potential of a particular cell site rapidly increases and decreases, an action potential happens. Following this depolarization, nearby areas also experience depolarization. Excitable cells, which include neurons, muscle cells, and some plant cells, are a class of animal cells that exhibit action potentials.
Larger protein molecules are integrated within a lipid bilayer that makes up a cell membrane. The lipid bilayer serves as an insulator because it impedes the flow of electrically charged ions very effectively.
Action potentials are produced by channel proteins, which change their state from closed to open depending on the voltage differential between the cell's interior and exterior.
Therefore, action potential is not possible without proteins.
To find more on action potential, refer here:
https://brainly.com/question/4305583
#SPJ1
Given the approximate pH of the following items, calculate the pOH, the [H+], and the [OH-]: oranges 3.5, rainwater 6.2, milk of magnesia 10.5.
pH plus pOH equals 14. POH equals -log[OH-]. The pOH is a measure of a solution's basicity, whereas the pH is a measure of a solution's acidity.
The pOH equation is what How can pH be used to calculate pOH?The concentration of hydrogen ions in a solution is gauged by its pH value. The concentration of hydroxide ions in a solution is determined by its pOH value. The formula pH + pOH = 14 relates the pH and pOH.
What is the pOH formula?You must know the hydroxide ion concentration in moles per liter to calculate the pOH of a solution. The following expression is used to calculate the pOH: pOH equals -log [OH-].
Calculation:pH of oranges 3.5
pH of rainwater 6.2
pH of milk of magnesia 10.5
pH + pOH = 14
To know more about pOH visit:-
https://brainly.com/question/17144456
#SPJ4
which of the following should be compared when deciding whether a given nucleophilic acyl substitution reaction will occur as written? select all that apply.
The following should be compared when deciding whether a given nucleophilic acyl substitution reaction will occur as written :
the relative basicity of the nucleophile and leaving group.The nucleophilic acyl substitution reaction will occur as written there are the following that we should compare is given as follows :
we should compare the relative basicity of the nucleophile and the basicity of the leaving group.the abilities of the relative abilities of the leaving group to nucleophile and the leaving group.The nucleophilic acyl substitution is the reaction in which the carbonyl and the nucleophile will forms a new bond of the acyl group.
To learn more about nucleophilic acyl substitution here
https://brainly.com/question/28383861
#SPJ4
which of the following is a likely outcome of increased water temperature on ph? group of answer choices when carbon dioxide disolves in water, it forms carbonic acid sea creatures retain oxygen and release acidic urine melting sea ice releases water with a ph of 5 coral reefs break down with heat and release acids into the water
The effect of increasing water temperature on pH is A. When carbon dioxide dissolves in water, it forms carbonic acid.
The degree of acidity of a solution is also known as pH. A solution is said to be neutral if it has a value of 7, is said to be acidic if it has a pH below 7, and is said to be alkaline if it has a pH above 7.
The increase in seawater temperature can be caused by the absorption of carbon dioxide from the atmosphere which can cause the formation of carbonic acid and the release of H+ ions which cause acidity so that the pH will decrease. The released hydrogen ions will bind to carbonate ions to form bicarbonate resulting in a decrease in carbonate ions, this can be harmful to marine biota such as the calcification process in corals which requires carbon ions.
Learn more about carbonic acid at:
https://brainly.com/question/17062319
#SPJ4
caffeine is the active ingredient in coffee, tea, and some carbonated beverages. add lone pairs, as needed, to the structure of caffeine.
Cyclohexane (C6H12C6H12), a cyclic chemical utilized in the production of nylon and discovered during the distillation of petroleum, is shown in three dimensions.
What is cyclic structure?Cyclic structure is defined as a substance where at least some of the atoms are linked together to form rings. The number of atoms in a ring can range from three to hundreds. The VSEPR shape of the caffeine molecule is trigonal planar. There is a 120 degree angle between each atom.
Both pyrimidinedione and imidazole rings are heterocyclic rings; pyrimidinedione rings have a 6-member structure and two nitrogen atoms, whilst imidazole rings have a 5-member structure.
Thus, cyclohexane (C6H12C6H12), a cyclic chemical utilized in the production of nylon and discovered during the distillation of petroleum, is shown in three dimensions.
To learn more about cyclic structure, refer to the link below:
https://brainly.com/question/9408873
#SPJ1
When zinc metal is reacted with nitric acid, ammonium nitrate, zinc nitrate and water are produced. The balanced equation for this reaction is as follows
Equation that represents Jada’s take-home earnings in dollars E = 12.20(h)-7.15
The equation that represents the situation is h=6.82 hours
What is equation?An equation is a formula that is express the equality of two expressions. The equation is representing direct proportion is , by the commenting them with in the equal sign .
As per the given question
Pay hour = $12.20 per hour
Bus fare = $7.15
1.Equation:
Assume that
She has work for "h" hours
Total earning = E
So,E = 12.20(h) - 7.15
If,Total earning = E = $90.45
So,E = 12.20(h) - 7.15
90.45 = 12.20(h) - 7.15
h = 6.82 hours
To know more about equation click-
https://brainly.com/question/2972832
#SPJ1
g 5. (12 pts) which of the following methods are best suited for the synthesis of compound a with high yield?
Through tests and theoretical calculations, the cause of the high yield and the process of the accidental oxidation reaction were determined.
What is an example of synthesis chemistry?When two of the substances sodium and chloride combine to create sodium chloride, common table salt, the reaction is 2Na + Cl2 → 2NaCl. A kind of synthesis process in which metallic nanoparticles react with CO2 to produce the equivalent metallic carbonate is illustrated by the aforementioned interaction between calcium oxide and CO2.
What takes place during chemical synthesis?Synthesis is the process of creating chemical compounds through the reaction of simpler constituents. A difficult and complex task that necessitates the ongoing creation of novel reactions, catalysts, and procedures is the building of sophisticated and defined new molecules.
To know more about synthesis visit:
https://brainly.com/question/14917187
#SPJ4
Question 30 of 43
The balanced equation for the neutralization reaction of aqueous H2SO4 with aqueous KOH is shown.
H2SO4 (aq) +2KOH (aq) → 2H2O+K2SO4 {aq}.
What volume of 0.240M KOH is needed to react completely with 11.4mL of 0.110M H2SO4 ?
The volume of 0.240 M KOH to react completely with 11.4 ml of 0.110 M sulphuric acid is 5.225 ml.
What is molarity?Molarity of a solution is the ratio of the number moles of solutes to the volume of solution in liters. Molarity is most common term used to express the concentration of a solution.
Let the volume and molarity of the titrant be V1 and M1 respectively and the volume of molarity of the analyte be V2 and M2 then,
M1 V1 = M2 V2.
Given volume of H₂SO₄ = 11.4 ml
Molarity = 0.11 M
Molarity of KOH = 0.24 M
volume of KOH = (11.4 ml × 0.11 M) / 0.24 M
= 5.225 ml.
Hence, the volume of KOH needed for the titration with sulphuric acid is 5.2 ml.
To find more on molarity, refer here:
http://brainly.com/question/16727614
#SPJ1
Compare the viscosity of neopentane, (CH3)4C, and n-pentane.Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. You would expect the viscosity of _____ to be larger mainly because _____ when compared to the other hydrocarbon. the spherical shape results in weaker dispersion forces the cylindrical shape results in stronger dispersion forces the linear shape means the molecule is more polar the symmetrical shape means tire molecule is less polar neopentane n-pentane
You would expect the viscosity of n-pentane to be larger mainly because the cylindrical shape results in stronger dispersion forces when compared to the other hydrocarbon.
It can be seen that the surface area of pentane increases because all carbon atoms are densely packed in neopentane. Therefore, the van der Waals forces are stronger in pentane and the intermolecular forces are stronger. Pentane is therefore the most vicious of the pair.
n-pentane has a higher boiling point than neopentane. The linear form of n-pentane mixes well with other n-pentane molecules, forming well-compacted layers of solids that are more difficult to separate. Viscosity is determined by the strength of the intermolecular forces, especially the shape of the molecules in the liquid.
Learn more about The viscosity here:- https://brainly.com/question/2684299
#SPJ4
balance the equation below in acidic medium and select the correct answer for the coefficient of the corresponding reactant or product:
The balance the equation below in acidic medium are :
6Fe²⁺ + 2Cr₂O₇²⁻ + 14H⁺ ----> 6Fe³⁺ + 2Cr³⁺ + 7H₂O
1) The equation is given as :
Fe²⁺ + Cr₂O₇²⁻ -----> Fe³⁺ + Cr³⁺
oxidation half : Fe²⁺ ---> Fe³⁺
reduction half : Cr₂O₇²⁻ ---> Cr³⁺
2) first balance the oxidation half :
Fe²⁺ ---> Fe³⁺ + e⁻
this equation is balanced.
3) balanced reduction half :
Cr₂O₇²⁻ ---> 2Cr³⁺
add seven H₂O molecule on the right side to balance the O atoms.
Cr₂O₇²⁻ ---> 2Cr³⁺ + 7 H₂O
to balance 14 H atom add 14 H⁺ on the left side :
Cr₂O₇²⁻ + 14H⁺ ---> 2Cr³⁺ + 7 H₂O
now, balance the charge :
Cr₂O₇²⁻ + 14H⁺ + 6e⁻ ---> 2Cr³⁺ + 7 H₂O
6 electrons are gained by the reduction half , so multiply 6 in oxidation equation
6Fe²⁺ ---> 6Fe³⁺ + 6e⁻
add both the equation we get :
6Fe²⁺ + 2Cr₂O₇²⁻ + 14H⁺ 6e⁻ ----> 6Fe³⁺ + 2Cr³⁺ + 7H₂O + 6e⁻
The final balanced equation is given as :
6Fe²⁺ + 2Cr₂O₇²⁻ + 14H⁺ ----> 6Fe³⁺ + 2Cr³⁺ + 7H₂O
To learn more about balanced equation here
https://brainly.com/question/10053651
#SPJ4
1. What is the use of the following reagents in the various organic reactions?
a. Carbon tetra chloride in the preparation of alkynes (5 marks)
b. Hydrogen bromide in the preparation of alkynes (5 marks)
a. Carbon tetra chloride is used as a solvent in the preparation of alkynes through the process of dehydrohalogenation. It acts as a reactant in the reaction, where it is converted into a chloride ion and a molecule of acetylene.
b. Hydrogen bromide is used in the preparation of alkynes through the process of bromination. It acts as a reactant in the reaction, where it is converted into a bromide ion and a molecule of acetylene. It is typically used in the presence of a Lewis acid catalyst, such as aluminum chloride, to facilitate the reaction.
Answer: A. Carbon tetrachloride (CCl4) is used as a solvent and a reactant in the preparation of alkynes through a reaction known as the chloroformic esterification or the Wurtz reaction. In this reaction, an alkyne is treated with CCl4 and sodium metal to produce a chloroformate ester, which can then be hydrolyzed to the corresponding carboxylic acid.
b. Hydrogen bromide (HBr) is used in the preparation of alkynes through a reaction known as the bromination of alkynes. In this reaction, an alkyne is treated with HBr and a Lewis acid catalyst to produce a geminal dibromide, which can then be hydrolyzed to the corresponding alkyne. This reaction is useful for the synthesis of alkyne compounds that are not readily available from other sources.
Both CCl4 and HBr are commonly used reagents in organic chemistry due to their reactivity and versatility. They can be used to synthesize a wide range of compounds, including alkynes, by reacting with various organic compounds under appropriate conditions.
If you have just added an acid (such as buttermilk) to your formula, then you are most likely using __________ as a leavening agent.
A. yeast
B. baking soda
C. baking powder
D. baking ammonia
Even if the recipe calls for an acidic ingredient, you can still use baking powder. This is something I frequently do when I add buttermilk or sour cream to cake batter.
The ideal answer is C.
Which of the following items uses baking ammonia as a leavener most frequently?For instance, baking ammonia is particularly effective as a leavening ingredient for low-moisture products with wide surface surfaces and high baking temperatures (less than 3% moisture in the baked product). Crackers, biscotti, and tiny, dry cookies are examples of effective applications.
What flour is the strongest out of the ones listed below?The strongest form of flour, white bread flour has a high protein content (12–14%) and offers a lot of structure.
To know more about baking powder visit:-
https://brainly.com/question/28780578
#SPJ4
For the chemical reaction
3KOH+H3PO4⟶K3PO4+3H2O
how many moles of potassium phosphate (K3PO4) are produced from 6.0 mol of potassium hydroxide (KOH)?
Answer:
2 moles
Explanation:
if 3 moles are used to produce one mole of K3PO4what about six do the maths if 3 is equal to one what about 6answer is twoQuestion 3
In the titration described in the previous problem, EDTA binds calcium ions with 1:1 stoichiometry.
If you begin the titration with a beaker containing 247mL of CaCl2 solution, and observe a color change after adding a total of 36.8 mL of 1.69M EDTA solution, what was the molar concentration of the initial CaCl2 solution?
Please enter your answer as a decimal (not scientific notation), using three significant figures.
To calculate the Molar Concentration, we will find the molar concentration by dividing the moles by liters of water used in the solution. The concentration of the initial CaCl2 solution of Ca2+ in CaCl2 solution is 42 mEq/L.
What is molar concentration?
Molarity is a measure of the concentration of a chemical species, especially a solute, in solution and is expressed as the amount of substance per unit volume of solution.
Therefore, To calculate the Molar Concentration, we will find the molar concentration by dividing the moles by liters of water used in the solution. The concentration of the initial CaCl2 solution of Ca2+ in CaCl2 solution is 42 mEq/L.
equation:-
[tex]1:1 stoichiometry,.36.8 mL of 1.69M EDTA solution[/tex]
To learn more about molar concentration refer the given link:-
https://brainly.com/question/11716136
#SPJ4
Calculate the amount of heat needed to melt 99.9 g of solid acetic acid (HCH,CO2) and bring it to a temperature of 85.1 °C. Round your answer to 3 significant digits. Also, be sure your answer contains a unit symbol
Q = 1.161 J/kg of heat is required to melt 99.9 g of solid acetic acid (HCH,CO2). Q = mL(Latent heat is the energy emitted or absorbed by a body while changing it state ). (Latent heat is the energy released or absorbed by a body while changing it state ).
How to fix?Apply the equation Q = mL where:
Energy is Q. (J)
m = Mass (g)
L = Acetic acid's latent heat of fusion 192(J/g) = J/g
Q is equal to 0.099 kg times 11.73 kj/mol.
Q = 1.161J/kg.
What is latent heat, and what varieties are there?Latent heat is the amount of energy that a substance experiencing a change in state, such as ice turning into water or water turning into steam, can absorb or release while maintaining a constant temperature and pressure. Types: The material exists in three states: solid, liquid, and gaseous.
What does "sensible heat" mean?Heat that can actually be felt is considered to be sensible heat. Instead of the phase shifting, energy is what causes the temperature to vary as it moves from one system to another. For instance, it warms the water instead of melting the ice.
Learn more about specific heat on:
https://brainly.com/question/11297584
#SPJ4
The two chemicals that were in the 2nd unknown solution where...
Potassium Chloride
Barium Chloride
Calcium Chloride
Lithium Chloride
Sodium Chloride
Copper Chloride
Strontium Chloride
Avoid contact with eyes, skin, and mucous membranes as both copper (II) chloride and barium chloride are extremely poisonous when consumed.
What does utilising cobalt glass for identifying sodium and potassium achieve?The potassium ion (K+) emits light in two different colours. By removing the main colour as the potassium burns, you can see the "underlying" hue by using the cobalt glass.
What warnings apply to cucl2 and LICL?Avoid contact with eyes, skin, and mucous membranes as copper(II) chloride is mildly poisonous. Body tissue is sensitive to lithium chloride. Before throwing the wooden splints in the trash, rinse them to prevent trashcan fires. Put on chemical splash goggles, gloves, and an apron to protect your skin.
To know more about barium chloride visit :-
https://brainly.com/question/29376445
#SPJ1
how to balance equation
Answer:
Count each type of atom in reactants and products. ...
Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances. ...
Repeat steps 1 and 2 until the equation is balanced.
Explanation:
MARK ME AS BRAINLIEST ♥️