Fire extinguisher is used to stop fires in a laboratory.
Chemical splashes on to your face then we should go to eye wash station for washing face.
Bunsen burner is knocked over while lit and a large fire is started then we should use fire extinguisher and should come out of lab.
Carbon dioxide in fire extinguisher is more denser than oxygen so when we spray carbon dioxide on fire, it cut off the contact with oxygen and fire goes off.
To know more about Bunsen burner here
https://brainly.com/question/27395498
#SPJ4
.the formula of an ionic compound starts with a metal and that of a molecular compound starts with a nonmetal. the statement is
perfectly true
Somewhat true
Slightly true
Not true at all
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the given statement is Slightly true.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
The formula of an ionic compound starts with a metal and that of a molecular compound starts with a nonmetal. The statement is Slightly true.
Therefore, the given statement is Slightly true.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ1
What is the total number of protons in an atom with the electron configuration 2-8-18-32-18-1.
The total number of protons in this atom is 79 because an atomic number of an element is equal to the number of protons. Here, the atomic number is 79 after adding the given electronic configuration.
What are Protons?
Every atom has a proton, a subatomic particle, in its nucleus. The particle possesses an electrical charge that is positive and opposite to the electrons.
What is Atom?
A nucleus plus one or more electrons bound to the nucleus make up an atom. The quantity of protons or electrons in an element's atom determines how different it is from other similar elements. The atomic number of an element, which serves as its primary identification, is the sum of its protons or electrons.
What is Electronic configuration?
The arrangement of electrons in atomic or molecular orbitals within an atom, molecule, or other physical structure is known as the electron configuration.
Hence, the total number of protons in this atom is 79, after adding 2 + 8 + 18 + 32 + 18 + 1.
To know more about Atom, check out:
https://brainly.com/question/6258301
#SPJ4
what are two ways in which we can increase the favorability of the products without adding or removing products or reactants?
The two ways in which we can increase the favorability of products without adding or removing products or reactants :
1. Increase the temperature of an endothermic reaction.
2. Decrease the temperature of an exothermic reaction.
3. Boost a reactant's concentration in an aqueous solution.
A reaction that is endothermic absorbs energy. Energy addition favors the reaction that forms the product.
A reaction that is exothermic releases energy. Removing the energy favors the reaction that forms the product.
To learn more about Endothermic and Exothermic Processes :
brainly.com/question/29555731
#SPJ4
determine the number of moles (n) of krypton gas contained in a 3.25 liter tank at a pressure of 5.80 atm and a temperature of 25.5 oc?
The number of moles of krypton are 7.6 moles.
According to Ideal gas law,
PV = n RT
Where
P = Pressure
V = Volume
n = number of moles
R = Universal gas constant
T = Temperature
Given
P = 5.80 atm
V = 3.25 L
T = 25.5 °C
R = 8.314
Now substituting the Value in the formula
PV = n RT
So separate the n from the formula
n = PV/RT
n= 5.80 × 3.15 × 1000 / 8.314 × 298.5
n=7.59
n ≈ 7.6 moles
Therefore the moles of krypton is 7.6 moles
To look more about moles click here
brainly.com/question/26416088
#SPJ
the regioselectivity and stereospecificity in hydroboration-oxidation of an alkene is best described as
It is best described as Markonikov orientation with both sun and
anti- addition.
Define Regioselectivity?
Regioselectivity is a term used to describe the preference for one reaction pathway over another in a chemical reaction. It is based on the relative stability of the reaction products and the reaction intermediates that lead to them. This preference is a result of the relative energies of the transition states and the different types of interactions that occur between reactants, intermediates, and products.
Define hydroboration-oxidation?
Hydroboration-oxidation is an organic reaction that involves the addition of boron and hydroxide ions to an alkene in order to form a borane, which is then oxidized by a proton-accepting oxidant. This reaction is used to convert alkenes into alcohols.
To know more about Hydroboration-oxidation,
https://brainly.com/question/29555668
#SPJ4
In a synthesis reaction, two atoms of sodium (na) combine with one molecule of chlorine gas (cl2) to produce sodium chloride (nacl). How many molecules of sodium chloride are produced?(1 point).
A synthesis reaction is a chemical process in which two dissimilar atoms interact to create a new substance or molecule.
The atomic number of the alkali metal sodium is 11. The valence electron in its outermost shell is positive (+1).
With the atomic number 17, chlorine belongs to the halogen family of elements. Its octet structure can only be completed with an electron.
Because of this, their bonding process is known as electrovalent or ionic bonding.
When 2 moles of sodium (Na) and 1 mole of chlorine (Cl) are combined, the following results:
2Na(s)Sodium+Cl2(g)Chlorine→2NaCl(s)Sodium Chloride
As a result of the foregoing process, we can infer that two sodium molecules are created when two sodium (Na) atoms interact with one molecule of chlorine gas (Cl2).
To learn more about sodium chloride click on the link
https://brainly.com/question/24878544
#SPJ4
Which statement best describes an advantage of asexual reproduction for a population of organisms
Answer:
The population can increase in number more rapidlya certain indicator has a ka equal to 1.0 x 10-5. the ph range over which this indicator changes color is
Since this indicator's pKa is 5, it will change color around pH 5.
What pH range does an acidic indicator fall into?To determine the approximate pH, use the cologarithm or negative logarithm of the H+ ion concentration.Similar to water, a solution with a pH of 7 is neutral. While a basic solution has a pH above 7, an acidic solution has a pH below 7.
How can pH be determined using indicators?By adding a chemical whose color depends on the pH, one of the simplest ways to figure out a solution's pH is to do so. These substances are known as acid-base indicators, or just indicators. The most popular acid-base indicator is probably litmus. if situated in comparatively.
To know more about pH visit:-
https://brainly.com/question/15289741
#SPJ4
A glowing beam of electric current is deflected away from a negatively charged object. What does this tell us about electricity?
It is densely packed and has a positive charge
It is made of negatively charged particles.
It is mostly empty space.
It is composed of a positive charge that is spread out with negative charges scattered about within it.
An electric field is produced when high voltage is applied to capacitor plates, deflecting cathode rays. The negatively charged electrons are directed away from the negatively charged plate and toward the positively charged plate when a cathode ray is transmitted through this electric field.
What is Electricity ?Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as described by Maxwell's equations
Voltage, current, and resistance are the three most fundamental elements of electricity. Voltage is comparable to the force that forces water through a hose. It is expressed as volts (V). CURRENT is comparable to the hose's diameter.
To know more about Electricity please click here ; https://brainly.com/question/776932
#SPJ1
A solution is prepared by dissolving calcium chloride in water and diluting to 500. 0 ml. If this solution contains 44 ppm chloride ions, the concentration of calcium ions is __________ ppm.
The concentration of calcium ions in the given solution will be 22 ppm.
What is Calcium chloride?
Calcium chloride is an inorganic compound, a salt made of calcium and chlorine. It is used as a food additive, an antifreeze, and a deicer for roads and sidewalks. It is also used in water treatment to increase the water's hardness and to remove impurities.
Calcium chloride is a chemical molecule made up of two chloride ions and one calcium ion.
When calcium chloride dissociates in water, the chloride ion becomes twice the calcium ions. The calcium chloride solution has been dissociated in 500 mL of water.
The concentration of chloride ions = 44 ppm.
The concentration of calcium ions = 44 ÷ 2
= 22 ppm
The concentration of calcium ions in the solution will be 22 ppm.
To know more about Calcium chloride,
https://brainly.com/question/8812739
#SPJ4
What is the percent composition by mass of oxygen in the compound mgso4? the formulas mass of mgso4 is 120 g/mol.
The percent composition by mass of oxygen in magnesium sulfate (MgSO₄) is 53.33%.
The percent composition of mass of oxygen in magnesium sulfate can be calculate as follows
we know that Molar mass of magnesium sulfate = 120 g/mol
Magnesium sulfate has four oxygen atoms, so multiply the molar mass of oxygen by four. So 16 × 4 = 64 g/mol.
To calculate the percent oxygen composition,
% oxygen composition = mass molar oxygen / mass molar
% oxygen composition = 64/120 × 100
% oxygen composition = 53.33 %
Therefore, the percent composition by mass of oxygen in magnesium sulfate (MgSO₄) is 53.33%.
What is percentage of the composition of the solution?The mass fraction of every element found in a compound is referred to as the percentage composition of the solution.
Three techniques can be used to determine the percentage composition of matter:
ratio of mass to percentvolume to volume ratiomass to volume ratioThe first method is good if both ingredients are solid and can be measured in grams.
A second approach can be used when both components are liquids.
A third approach is used when one substance is solid and the other is liquid. Divide the two quantities and multiply by 100 to calculate the composition ratio. By convention, both quantities must have the same units.
Learn more about percentage composition click here:
brainly.com/question/17505281
#SPJ4
what is the characteristic reaction of carboxylic acid derivatives? multiple choice electrophilic addition nucleophilic elimination nucleophilic acyl substitution oxidation
The characteristic reaction of carboxylic acid derivatives is nucleophilic acyl substitution.
the carboxylic acid contains c=o bonds and at the starting there is a nucleophilic attack on a electrophilic carbonyl atom which forms a tetrahedral alkoxide intermediate.
now, the alkoxide negative charge give stability by transferring the y leaving group which allows the c=o bond to reform and which make a new acyl compound.
[tex]R-CO-Y+:Nu^{-} \rightarrow R-C-(O)(Y)(Nu)[/tex]
now, the above reaction is considered substitution because y group of the carboxylic acid derivative get exchanged with nucleophile.
Learn more about carboxylic acid derivatives.
brainly.com/question/28167857
#SPJ4
what volume will 4.95 moles of hydrogen gas occupy at stp
Answer:
Explanation:The molar volume of a gas expresses the volume occupied by 1 mole of that respective gas under certain temperature and pressure conditions.
The most common example is the molar volume of a gas at STP (Standard Temperature and Pressure), which is equal to 22.4 L for 1 mole of any ideal gas at a temperature equal to 273.15 K and a pressure equal to 1.00 atm.
So, if you are given these values for temperature and pressure, the volume occupied by any number of moles of an ideal gas can be easily derived from knowing that 1 mole occupies 22.4 L.
V
=
n
⋅
V
m
o
l
a
r
For 2 moles of a gas at STP the volume will be
2
moles
⋅
22.4
L/mol
=
44.8
L
For 0.5 moles the volume will be
0.5
moles
⋅
22.4
L/mol
=
11.2
L
, and so on.
The molar volume of a gas is derived from the ideal gas law
P
V
=
n
R
T
:
P
V
=
n
R
T
→
V
=
n
R
T
P
→
V
n
=
R
T
P
Let's say you were given a temperature of 355 K and a pressure of 2.5 atm, and asked to determine the gas' molar volume at these conditions. Since molar volume refers to the volume occupied by 1 mole, you'd get
V
1 mole
=
0.082
L
⋅
a
t
m
m
o
l
⋅
K
⋅
355
K
2.5
a
t
m
=
11.6
L/mol
This is how much volume 1 mole occupies at 355 K and 2.5 atm. It becomes clear that the volume occupied by any number of moles at these conditions can be easily determined:
2
moles
⋅
11.6
L/mol
=
23.2
L
0.5
moles
⋅
11.6
L/mol
=
5.8
L
, and so on.
As a conclusion, knowing a gas' molar volume at a certain temperature and a certain pressure can simplify the calculation of the volume occupied by any number of moles of that respective gas.
copper forms a octahedral complex with that has a charge of . what is the coordination number and oxidation state of the copper atom?
For an octahedral complex, the coordination number of the central copper ion is six and it is in the +2 oxidation state.
What is an octahedral complex ?We know that an octahedral complex is one in which there are six ligands that are attached to the central metal ion. The coordination number has to do with the number of the ligands that could be found around the central metal ion.
Copper is found in the + 2 states when it forms complexes that are octahedral in nature ad the coordination number of the central copper ion in the complex is always six.
Learn more about octahedral complex :https://brainly.com/question/11856948
#SPJ1
electronegativity for boron is 2.0, and electronegativity for fluorine is 4.0. which type of bond forms between boron (b) and fluorine (f) in bf3?
Electronegativity for boron is 2.0, and electronegativity for fluorine is 4.0. which type of bond forms between boron (B) and fluorine (F) in BF₃ is non polar covalent bond.
The BF₃ is the covalent molecule. the electronegativity for boron is 2.0 and the electronegativity for the fluorine is 4.0 . the boron has 3 valence electrons and need 5 more to complete the octet and fluorine has 7 valence electrons . thus boron form three covalent bond with the atom of fluorine and try to complete the octet.
The BF₃ is a triangular planar molecule. the dipole moment in the BF₃ molecule is zero therefore BF₃, boron trifluoride is a non polar covalent molecule.
To learn more about electronegativity here
https://brainly.com/question/19374222
#SPJ4
When magnesium reacts with copper sulfate solution, the ionic equation is:
Mg(s) + Cu² (aq) → Mg² (aq) + Cu(s)
-
Which species has lost electrons?
Which species has gained electrons?
Which species is oxidised and which is reduced?
(4 marks)
Answer:
magnesium because it gives its electrons to copper
copper gains from mg
copper is reduced and magnesium is oxidised
how many hydroxide ions would be added to both sides of the reaction if the redox reaction below was balanced under basic conditions?
According to the rule of a redox reaction, the number of hydroxide ions that would be added depends on the number of net protons present in the reaction to balance the reaction.
How to balance a Redox Reaction in the basic medium?The following steps can be used to balance a redox reaction in a basic solution:
1) The reaction should be split in half.
2) Equilibrate all the elements except for H and O.
3) Add H2O to bring the O atoms into balance.
4) Add H+ to bring the H atoms into balance.
5) Neutralize any H+ by adding OH- ions to both sides.
6) To create H2O, combine H+ and OH-.
7) Simplify by eliminating the surplus water.
8) Add e- to balance the charges.
9) Combine the half-reactions, then condense.
According to the rule of a redox reaction, the number of hydroxide ions that would be added depends on the number of net protons present in the reaction to balance the reaction.
To know more about balancing redox reactions visit:
https://brainly.com/question/25977595
#SPJ4
hydrogen bonding is an attractive force that plays a key role in determining the physical properties of molecular substances. what features are required for a substance to experience hydrogen bonding among its own molecules? choose one or more: h atom not in any bond f covalently bonded to c h bonded covalently to o, n, or f an o, n, or f atom with one or more lone pairs any o, n, or f atom
H bonded covalently to O, N or F is required for a substance to experience hydrogen bonding among its own molecules.
It is necessary that the molecules have an atom of H attached to a highly electronegative atom such as N, O, F and also the molecule had to have a solitary pair of electrons more specifically in a small highly electronegative atom such as N, O, F.
The hydrogen bond is responsible for many of the anomalous physical and chemical properties of compound of N, O, F.
Hydrogen bonds is found within intermolecular forces, which are type of attractive forces that exist between molecules of covalent substances.
Such bonds are weaker that an ionic bond or covalent bond but stronger than Vander Waals forces.
One atom of the pair (the donor) generally a Fluorine (F), Nitrogen (N) or Oxygen (O) atom is covalently bonded to a hydrogen atom ( -FH, -NH, -OH),
whose electrons it shares unequally, its high electron affinity causes the hydrogen to take on a slight positive charge.
So, In order for a substance to experience hydrogen bonding among its own molecules, H must be covalently bound to O, N, or F.
To learn more about Hydrogen bonding, Here :
https://brainly.com/question/17626498?referrer=searchResults
#SPJ4
A ingle replacement reaction i run in the lab between 45. 0g hydrofluoric acid,HF, and 125. 0g tin forming tin(ll) fluoride and another product
The molar mass of tin(II) chloride is: 84.9 g
Calculate the molar mass of tin(II) chloride?
The number of moles n1 is thus:
n1= m1/M1 = 2.25 mol
According to the balanced reaction, the ratio by number of moles n of tin(II) chloride produced to the number of moles n1 of HF used is 1:2
As such, the number of moles of tin(II) chloride produced is :
n = 1/2 [tex]n_{1}[/tex] = 0.45 mol
The molar mass of tin(II) chloride is:
M= A[tex]_{r}[/tex](Sn)+2A[tex]_{r}[/tex](Cl) = 188.7 g/mol
The mass m produced is thus:
m = nM
= 0.45 mol × 188.7 g/mol
≈ 84.9 g
Therefore, the molar mass of tin(II) chloride is: 84.9 g.
To know more about molar mass, check out:
https://brainly.com/question/837939
#SPJ4
which of these compounds is the hemiacetal that forms when ethanol reacts with propanal?
The compound that is the hemiacetal that forms when ethanol reacts with propanal is attached.
What is the hemiacetal?A hemiacetal is a combination of an alcohol and an ether attached to the same carbon. Hydrogen holds the fourth bonding position. An aldehyde is the starting point for a hemiacetal. Hemiacetals are formed from aldehydes and are named after the Greek word "hemi," which means "half."
Ethanol is a flammable, colorless chemical compound that is one of the most commonly found alcohols in alcoholic beverages. It is also known as "ethyl alcohol" or "grade alcohol."
Propionaldehyde, also known as propanal, is an organic compound. It's a three-carbon aldehyde. It has a slightly fruity odor and is colorless and flammable. It is mass-produced on an industrial scale.
In this case, the compound illustrate the reaction.
Learn more about hemiacetal on:
https://brainly.com/question/2983055
#SPJ1
which of the following relationships relating to bond length is generally correct? multiple choice question. a) the shorter the bond, the lower the bond dissociation energy b) the shorter the bond, the stronger the bond c) the shorter the bond, the weaker the bond d) the shorter the bond, the fewer the electrons in it
The correct option for the relationships relating to bond length is (b), i.e. the shorter the bond, the stronger the bond
As the atoms become bigger, the bonds also get stronger and longer. Larger orbitals, which assume a lower electron density and a poor percentage overlap with the hydrogen s orbital, lead to longer bonds. The H-X bonds weaken as they lengthen since this is what happens as we progress down the periodic table. Atoms that are more closely spaced from one another have a stronger link than those that are farther away. Because triple and double bonds are shorter than single bonds and enable atoms to be placed closer together, they are also much more durable. Atomic radii make up small bond lengths. Therefore, in general, the smaller the atom's radius, the stronger the link will be. This is primarily due to the electrons' proximity to the nucleus, which creates a strong bond.
To know more about bonds visit:
https://brainly.com/question/10777799
#SPJ4
what would happen if you used equal masses of all the compounds? for example, 2.00 g as opposed to equal moles of each compound?
Equal masses would result in different amounts of CO, but the same quantity of CO2 would result from equal masses. Equivalent masses would exhibit high variability and be challenging to measure in a lab.
How are the volume and mass of a substance related?Density is a measurement that connects matter, mass, and volume. By dividing a substance's mass by its volume, density is determined. Grams are commonly used to measure mass. In terms of volume, solids are measured in cubic centimeters or cubic meters, whilst liquids are measured in liters or milliliters.
Do compounds with various weights and volumes have the same volume?Distinct masses exist for equal quantities of two different substances. because the density of different materials varies.
To know more about volume and mass of a substance visit:-
https://brainly.com/question/13130538
#SPJ4
What do you think is the consequence of eutrophication? a) a decrease in the amount of oxygen available to aquatic life b) a shift in water temperature c) an increase in the food available for aquatic life d) an increase in the amount of sediments in the ecosystem.
Eutrophication causes a decrease in the amount of oxygen available to aquatic life.
What is Eutrophication?
Eutrophication sets off an ecosystem chain reaction starting with algae and vegetation in abundance. This lowers the pH of seawater, a process known as ocean acidification.
Eutrophication occurs when nutrients are abundant, and visible algal blooms grow densely. Eventually, these algae die and decompose, absorbing oxygen and reducing oxygen levels in the water. Eutrophication can also lead to a shift in species composition towards faster-growing algal species and from long-lived macroalgae to more wild species.
Thus, Eutrophication causes a decrease in the amount of oxygen available to aquatic life.
To know more about Eutrophication, check out:
https://brainly.com/question/8499582
#SPJ4
How can u figure out if an unknown solute is ionic or polar covalent
ɪꜰ ᴛʜᴇ ᴅɪꜰꜰᴇʀᴇɴᴄᴇ ᴏꜰ ᴛʜᴇ ᴇʟᴇᴄᴛʀᴏɴᴇɢᴀᴛɪᴠɪᴛʏ ʙᴇᴛᴡᴇᴇɴ ᴛʜᴇ ᴛᴡᴏ ᴇʟᴇᴍᴇɴᴛꜱ ɪꜱ ɢʀᴇᴀᴛᴇʀ ᴛʜᴀɴ 1.7 ᴛʜᴇɴ ᴛʜᴇ ʙᴏɴᴅ ɪꜱ ɪᴏɴɪᴄ. ᴛʜᴇ ᴅɪꜰꜰᴇʀᴇɴᴄᴇ ᴡɪᴛʜ ᴀ ᴘᴏʟᴀʀ ᴄᴏᴠᴀʟᴇɴᴛ ʙᴏɴᴅ ɪꜱ 0.5 ᴛᴏ 1.7 ᴀɴᴅ ᴀ ɴᴏɴᴘᴏʟᴀʀ ᴄᴏᴠᴀʟᴇɴᴛ ʙᴏɴᴅ ɪꜱ ꜰʀᴏᴍ 0 ᴛᴏ 0.4.
■ I hope it helps uh..!!
□ mark me as brainliest ♥️
Which phrase describes a risk of using the radioisotope co-60 in treating cancer.
One of the most important use of cobalt-60 is treating cancer as it produces gamma rays.
In a teletherapy unit as a source of intense gamma radiation for the treatment of a variety of cancers an external sealed source of cobalt-60 is used. Cobalt-60 is also used as a medical tracer. A material that is introduced into the body to make possible the observation of chemical, physical or biological processes in the body is known as medical tracer.
Cobalt-60 emits two high energy gamma rays, making cobalt-60 both an internal and external hazard. Ingestion is the primary exposure pathways of concern which includes (drinking water and fish consumption), and exposure by inhalation and external exposure.
Learn more about Cobalt-60 from the link given below.
https://brainly.com/question/8181329
#SPJ4
Keq = 175 for the reaction
2 NO2(g) ↔ 2 NO(g) O2(g)
What i [O2] if [NO2] = 0. 575 and [NO] = 2. 96?
2 NO2(g) ↔ 2 NO(g) O2(g) is the equation.
Which is a factor that affects the equilibrium constant?
The only thing that changes the equilibrium constant is a change in temperature. Changing the pressure can change the position of the equilibrium. According to Le Chatelier's Principle, the equilibrium position moves in such a way that it tends to undo the changes you make.
Does pressure affect equilibrium constant?
Changing the system pressure does not change the equilibrium constant. The only thing that changes the equilibrium constant is a change in temperature. Changing the pressure can change the position of the equilibrium.
Does equilibrium constant depend on pressure and volume?
Equilibrium constants are temperature dependent and independent of the actual amounts of reactants and products, the presence of catalysts, and the presence of inerts. It is also independent of the concentration, pressure and volume of extracts and products.
To know more about equilibrium , check out:
https://brainly.com/question/517289
#SPJ4
Determine the number of moles in 4.69 x 10^23molecules of glucose.
Answer:
[tex] \huge{ \boxed{0.779 \: \text{moles}}}[/tex]
Explanation:
To find the number of moles in a substance given it's number of entities we use the formula;
[tex] \bold{n = \frac{N}{L} \\ }[/tex]
where
n is the number of molesN is the number of entitiesL is the Avogadro's constant which is 6.02 × 10²³ entitiesFrom the question
N = 4.69 × 10²³ glucose molecules
[tex]n = \frac{4.69 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{4.69}{6.02} \\ = 0.77907[/tex]
We have the final answer as
0.779 molesWhat is one of the causes of mechanical weathering?acid rainoxidationanimal actionscarbon dioxide.
The causes of mechanical weathering include freezing and thawing, the release of pressure, plant growth, actions of animals, and abrasion.
What is mechanical weathering?
Mechanical weathering breaks rocks into smaller pieces. These small pieces are the same as large stones. They are just tiny! Rocks are crushed without changing their composition. Smaller pieces contain the same minerals in equal proportions. The phrase "chips from old blocks" can be used to describe mechanical weathering. The main players in mechanical weathering are water, ice and wind.
Intrusive igneous rocks form at depths of hundreds of meters to tens of kilometers. Sediments become sedimentary rocks only when they are buried in other sediments at depths of several hundred meters or more. Most metamorphic rocks form at depths of several kilometers to tens of kilometers.
Therefore, the causes of mechanical weathering include freezing and thawing, the release of pressure, plant growth, actions of animals, and abrasion.
To know more about mechanical weathering, check out:
https://brainly.com/question/458304
#SPJ4
which of the following is an intensive property of a sample of neon gas? a) its mass b) the number of neon atoms present c) its temperature d) its volume e) the number of moles of neon atoms present
One of the intensive characteristics of a sample of neon gas is its temperature.
An intense property is a property of matter that does not rely on the quantity of the sample but rather just on the kind of matter present in the sample. Color, temperature, density, and solubility are some examples of other intense qualities. It is said to be intense if a property does not vary depending on the quantity of sample that is utilized. Because the temperature does not alter dependent on the quantity, it is said to be intense.
To know more about gas click on the link below:
https://brainly.com/question/6140407
#SPJ4
In double replacement reactions, why will two metals not combine with each other when products are formed?.
A double replacement reaction occurs when fragments of two ionic compounds shift places to form two new compounds (also known as a double displacement, exchange, or metathesis reaction).
What is Double Displacement Reaction?
A twofold displacement reaction is one in which one reactant is partially replaced by another.
Following is a summary of double displacement reactions:
AD = CB + CD + AB
The ions in two reactant ionic compounds are switched out for the same ions in two new product compounds during a double replacement process.
A double replacement reaction occurs when two reactants switch cations or anions to form two new products.
Other names for double replacement processes include metathesis reactions and double displacement reactions.
Precipitation, gas generation, and neutralization are examples of double replacement reactions.
To learn more about double replacement reaction from the given link.
https://brainly.com/question/23918356
#SPJ4